Ra 45052
-
Upload
shortcutter -
Category
Documents
-
view
212 -
download
0
Transcript of Ra 45052
-
8/16/2019 Ra 45052
1/2
RA 45 052/06.98
1/2
Subplates to ISO 4401-3 Size 6, ANSI B 93.7 and NFPA T 3.5.1 M R1,
D 03 with SAE, NPT or G (BSP) ports
Unit dimensions: dimensions in inches (millimeters)
RA45 052/06.98
Replaces: 05.94
Model Part No. D1 T1 D2 D3 T3 Valve mounting bolts* WeightMinimum Spot face Socket head cap screw (approx.) lbs (kg)
G341/12 RR00341065 SAE-6; 9/16-18 10-24 0.828 (21) 0.03 (0.8) 4) 10-24 UNC
G341/05 RR00422656 NPT 1/4" 0.51 (13) – – 1.4 (0.6)
G341/01 RR00424447 G (BSP) 1/4" M5 0.866 (22) 0.04 (1) 4) M5
Model Part No. D1 T1 D2 D3 T3 Valve mounting bolts* WeightMinimum Spot face Socket head cap screw (approx.) lbs (kg)
G342/12 RR00455128 SAE-8; 3/4-16 10-24 0.969 (25) 0.03 (0.8) 4) 10-24 UNC
G342/05 RR00424450 NPT 3/8" 0.51 (13) – – 2.4 (1.1)
G342/01 RR00424448 G (BSP) 3/8" M5 1.102 (28) 0.04 (1) 4) M5
1) Preferred models typically stocked, in bold
T
A
P
B
T
A
P
1 3; 4
2
1.594 (40.5) 0.827 (21)
1.094 (27.8)
0.748 (19)
0.406 (10.3)
D2/0.39
(10) deep
Ø0.299
(7.6) max.Ø0.276 (7)
3.15 (80)
3.74 (95)
0.295 (7.5)
2.28(58)
1.22(31)
0.984 (25)
0.35 (9)
2.283 (58)D3/T3
D1/T1
1.575 (40)
0.866 (22)
2.2(56)
1.339(34)
2 . 7 6
( 7 0 )
1.28(32.5)
0.5(12.7)
1.045
(26.55)
0.64(16.25)
0.234
(5.95)
0.03(0.75)
Model G 341/..1)
Model G 342/..1)
T
A
P
B
T
A
P
B
13; 4
2
1.594 (40.5) 1.024 (26)
1.094 (27.8)
0.748 (19)
0.406 (10.3)
D2/0.39
(10) deep
Ø0.299
(7.6) max.
Ø0.276 (7)
3.543 (90)4.13 (105)
0.295 (7.5) 1.181 (30)
2.717 (69)D3/T3
D1/T1
1.772 (45)
0.827 (21)
3 . 3 5
( 8 5 )
3.15(80)
1.22(31)
0.03(0.75)
0.234
(7.5)
0.64(16.25)
1.045
(26.55)
0.93(23.7)
1.28(32.5)
3.03(77)
0.35 (9)
1.339(34)
-
8/16/2019 Ra 45052
2/2
RA 45 052/06.98
2/2
Unit dimensions: dimensions in inches (millimeters)
Model Part No. D1 T1 D2 D3 T3 Valve mounting bolts* WeightMinimum Spot face Socket head cap screw (approx.) lbs (kg)
G502/12 RR00487397 SAE-8; 7/8-140.55 (14)
10-24 1.188 (30) 0.03 (0.8) 4) 10-24 UNC4.3 (1.9)
G502/01 RR00455110 G (BSP) 1/2" M5 1.339 (34) 0.04 (1) 4) M5
1 Valve mounting surface
2 Cut-out required for panel mounting
3 Threaded holes for valve mountingMinimum tap depth 0.4 inches (10 mm)
4 Valve mounting bolts*, 4) socket head cap screwsSAE grade 8 or better
Valve mounting bolts
Bolt kits 4 bolts/kit
Size Mounting Bolt Kit Part No.Length
1-1/4" US00 834 7081-1/2" US00 834 710
2" US00 833 3653" US00 832 142
3-1/4" US00 831 983
10-24 3-1/2" US00 832 3614-1/2" US00 831 9864-3/4" US00 831 944
5" US00 833 598
6" US00 833 2446-1/4" US00 833 597
Stud kit (PU-A 10-26)
up to 12" 10-24 threaded rod 1 piece US00 804 790stud nuts 10-24 (/5/32 hex) 1 piece US00 804 792
Standard bolt kit4) 10-24x2 part no. US00 833 365
Metric and other non-standard bolt kits are also available.
* Valve mounting bolts are ordered separately. The lengthand tightening torque is determined by the type andnumber of sandwich plates installed.
Model G 502/..
T
A
P
B
1.378 (35)
0.35 (9)
T
P
A B
3.248 (82.5)
2.165 (55)
1.083 (27.5)
D3/T3
D1/T1
2.283(58)
=
=
2
3 . 7 4
( 9 5 )
Ø0.299
(7.6) max.
Ø0.276 (7)
1.594 (40.5)
D2/0.39
(10) deep3; 4
1
1.417 (36)
1.094 (27.8)
0.748 (19)
0.406 (10.3)
4.331 (110)
4.92 (125)
0.295 (7.5)
4.0 (102)
0.03(0.75)
1.22
(31)
0.64
(16.25)
1.36
(34.7)
0.234(5.95)
1.045(26.55)
1.28
(32.5)
All rights reserved – Subject to revision
Printed in U.S.A.
Bosch Rexroth Corporation Rexroth Hydraulics Div., Industrial, 2315 City Line Road, Bethlehem, PA 18017-2131 Tel. (610) 694-8300 Fax: (610) 694-8467Rexroth Hydraulics Div., Mobile, 1700 Old Mansfield Road, Wooster, OH 44691-0394 Tel. (330) 263-3400 Fax: (330) 263-3333