r Norman 4500, 14500, 34500 & 54500 Series Tee-Type Filtersku-chabell.com/img/file7.pdfUp to 20,000...

Up to20,000 PSI

• Aluminum orStainlessSteelHousings

• Single orDual Stage

• Stainless,Glass Fiber,Sinteredor CelluloseElements

Norman4500, 14500, 34500& 54500 SeriesTee-Type Filters

NORMAN FILTER COMPANY, L.L.C.PHONE: 708-233-5521 • FAX: 708-430-5961www.normanfilters.com

Up to20,000 PSI

• Aluminum orStainlessSteelHousings

• Single orDual Stage

• Stainless,Glass Fiber,Sinteredor CelluloseElements

114136 4500 series r4 2/15/05 2:21 PM

Chris-L

Text Box

NORMAN FILTER COMPANY, L.L.C. PHONE: 708-233-5521 • FAX: 708-430-5961 [email protected] • www.NormanFilters.com

PHONE: 708-233-5521 • FAX: 708-430-5961 2

NORMAN TEE-TYPE FILTERS

Choice ofElements

• Cellouse• Glass Fiber• Stainless

Steel• Porous

SinteredStainless

Choice ofHousingMaterial

• Aluminum• Stainless

Steel

• All pressure ratings and seal configurations have beentested with hydraulic fluid any other fluid or gas pleaseconsult factory before installation.

FLUID CONDITIONERS

Norman Tee-Type filters are used to condition a wide variety of fluids. Whether your application ishydraulic, pneumatic, chemical processing, compressed gases or industrial fluid clarification, Norman fil-ters will remove particulate contaminates from your system to keep it running longer. Filters increase thelife of the pumps, valves, regulators and other components in your system, with pay-backs of longersystem life, reduced down-time, and improved productivity. Norman offers the broadest filter line in theindustry. This wide variety of sizes, materials, filtration media and optional accessories, allavailable from stock, allows you to select the model with the best price/performance value for your application.

HOUSINGS

Norman Tee-Type filter housings are made of either aluminum or stainless steel. Aluminumpressure vessels are rated at 5000 PSI (operating), and offer light weight and low cost; our stain-less steel housings have higher operating pressures (up to 20,000 PSI) and excellent corrosionresistance. These housings come in five basic sizes, with flow rates up to 50 GPM (with 100 SSUoil), or 4000 SCFM @ 3000 PSI, GN2). Port sizes range from 1/4” to 11/2” female pipe thread(FPT), or 1/2” to 11/2” female O-ring thread (SAE). High-pressure portings and weldments areavailable on 10,000, 15,000 and 20,000 PSI models. NOTE: All pressure ratings are static, forapplications calling for pulsating or pressure spikes, consult factory.

ELEMENTS

The replacement element is the heart of the filter. Norman offers four media types in a varietyof micron ratings, with both low and high-collapse construction. In addition, six O-ring materialsare available, most at no additional charge, to assure compatibility with virtually any fluid.CELLULOSE: Resin-impregnated cellulose media has low cost and disposable convenience.Being a depth-type filter, it has high dirt-holding capacity for long life. Available in 3, 10 and 25micron efficiency ratings with collapse pressures of 150 and 300 PSID. All Norman celluloseelements are bonded with epoxy for excellent fluid compatibility.GLASS FIBER: Multi-layered glass fiber elements use aerospace technology to produce highefficiency silt-control filtration. Available in 1, 3, 5, 10 and 25 micron ratings, absolute (Betax= 200). with collapse ratings of 300 and 3250 PSID. All are epoxy bonded. Its low flowrestrictions and extremely long life (200 to 300% greater then cellulose) provide for extendedservice intervals and reduced maintenance cost.STAINLESS STEEL: Our precision woven 304 stainless steel wire mesh elements provideabsolute size discrimination and freedom from media migration. Available in nine micron ratingsfrom 2X to 200µ, absolute (betax = 75), all-welded construction, with collapse rating of 4500PSID. These elements are most suited to extreme temperature ranges and corrosive conditions.Stainless steel elements are reusable, with proper cleaning they can be reused almost indefinitely.316 SINTERED METAL: Now available in .5, 1, 3 and 7 micron absolute, 316 sintered metalelements. These elements are perfectly suited for low viscosity fluid and all gas applications.

DUAL ELEMENTS

Norman Tee-Type filters are available in a unique dual-element configuration. The outerelement is low-cost disposable cellulose for inexpensive system clean-up, and the inner element is recleanable stainless steel for absolute particulate retention. Dual-element filters combine very high dirt holding capacity and positive non-bypass filtration with the convenience of a low-cost replacement element.

OPTIONAL ACCESSORIES

Norman Tee-Type filters have a number of optional accessories in stock to modify our standardhousings to meet your specific application requirements:

Visual Indicator: Signals when the element needs changing. Reduces maintenance costscaused by premature element change-out.

Electrical Switch: Similar to visual indicator, above, but with a microswitch (normallyopen) and standard conduit connection. Used to actuate warning light, buzzer, etc.,to signal element clogging.

Bypass Relief Valve: Internal valve relieves pressure during flow surges or cold start-up. Recommended with low-collapse elements.

Pressure Taps: Gauge ports on the inlet and outlet of the filter for external differentialpressure sensing devices.

Bowl Drain: Allows liquid to be drained from the bowl to facilitate element change-out.

114136 4500 series r4 2/15/05 2:21 PM

PHONE: 708-233-5521 • FAX: 708-430-59613

535 SIZE 10 GPM / 300 SCFMSPECIFICATIONSRated Flow @ 10 PSID, clean (max.):

10 GPM (w/100 SSU oil)300 SCFM (@ 3,000 PSI, GN2)

Housing Material:5,000 PSI Units:

7075T6 Aluminum6,000 PSI Units:

303 & 316 Stainless Steel10,000 PSI Units: 17-4 PH, 316LSS15,000 PSI Units: 17-4 PH, 316LSS20,000 PSI Units: 17-4 PH

Pressure Ratings:5,000 PSI Units:

5,000 PSI Operating7,500 PSI Proof20,000 PSI Burst

6,000 PSI Units:6,000 PSI Operating9,000 PSI Proof24,000 PSI Burst



Pressure Ratings (continued):20,000 PSI Units:


O-Ring Temperature Range:Buna-N: -40°F to +250°FViton: -20°F to +350°FEthylene Propylene: -65°F to +300°FTeflon*: -320°F to +400°FKalrez*: -40°F to +600°F

Element Temperature Range:Cellulose: -65°F to +275°FGlass Fiber: -70°F to 350°F304 Stainless: -425°F to 1,000°F

Options:Relief Valve Setting: 50 PSIDVisual Indicator Setting: 40 PSIDElectrical Indicator Setting: 40 PSIDElectrical Indicator Current Rating:

0.5 Amps ResistiveTotal Assembly Weight:

Aluminum 41/4 Lbs.Stainless Steel: 12 Lbs.10K, 15K, & 20K Stainless: 39 Lbs.

*T.M. DuPont Corp.

5,000 & 6,000PSI UNITS

10,000 & 15,000 & 20,000PSI UNITS

HOW-TO-ORDERPressure Port Size, Type Housng Material Element Code Micron Rating Collapse Rating O-Ring Material Optional Accessories

Code

12XB1B3

30305B5

710

B102025

B2540

100200

.5PRAFCD

LNEMKH

DR-1DR-2DR-3DR-4

DRCT4DRCT6

EEEER

RS1S2S3S4

SCT4SCT6

VVR

1/8” NPT Bowl Drain*1/4” NPT Bowl Drain*1/8” SAE Bowl Drain*1/8” SAE Bowl Drain*1/4” MP Bowl Drain3/8” MP Bowl Drain40 psid Elec. Switch*Switch + Valve*50 psid Valve1/8” NPT DP Ports*1/4” NPT DP Ports*1/8” SAE DP Ports*1/4” SAE DP Ports*1/4” MP DP Ports3/8” MP DP Ports40 psid Indicator*Indicator + Valve*

150# Cellulose300# Cellulose300# Glass Fiber2000# PSS3250# Glass Fiber4500# Stainless Mesh

Buna-NVitonEthylene PropyleneTeflon™90 Durometer NitrileKalrez™

Teflon and Kalrezare registeredtrademarksof DuPont.

* Not available on 20K

2

35

10

2025

40100200

.2

.5

——.1

—

—

—

.5 1

10133

1018

57

251040402575

200300

••

•

•

•

•

•

•

•

•

••

•••

Nom. Abs. G A F P

CALL

FACTORY

Aluminum**303 Stainless316 Stainless*

5K Only6K, 10K, 15K

***

AGT

CeluloseDual*Glass FiberStainless Mesh316 Sintered

ADFGP

psipsipsipsipsi

16N16S25323545752503755627504S6S

1” NPT1” SAE (–16)3/4” FPT1/4” FPT1/2” FPT1/2” SAE (–8)3/4” SAE (–12)1/4” Medium Pressure*3/8” Medium Pressure*9/16” Medium Pressure*3/4” Medium Pressure*1/4” SAE (–4)3/8” SAE (–6)

50006000

100001500020000

4545

145345545

*10K, 15K & 20K OnlyNote: SAE port notrecommended over6000 psi.Socket weld portsavailable on special order.

ASSEMBLY:

REPLACEMENT ELEMENT: 535

NOTE: Add pressure drop of the housing to that of the element to obtain total initial clean pressure drop of the assembly. To determine pressure drop for a different viscosityand density fluid, use the following conversion factor:

New P P 100 SSU x x100 SSU 0.9

new viscosity, SSU new spec. gravity@==

FLOW DATA (PRESSURE DROP vs. FLOW)

10

9

8

7

1/4”

FPT

or

1/2”

SAE

1/2” FPT or

3/4” SAE

3/4” or1” SAE

6

5

4

3

2

1

00

DIFFERENTIAL

PRESSURE

PSID

2 4FLOW (GPM), 100 SSU OIL

Filter Assembly Less Element

6 8 10

10

9

8

7

3µ

10µ

25µ

6

5

4

3

2

1

00

DIFFERENTIAL

PRESSURE

PSID


535A Reinforced Cellulose Elements

6 8 10

10

9

8

73µ

Low Collapse

Low Collapse

Low CollapseHigh Collapse

5µ

5µ

10µ

6

5

4

3

2

1

00

DIFFERENTIAL

PRESSURE

PSID


535F Series Glass Fiber Elements

6 8 10

B1

10

9

8

7

10µ2X

6

5

4

3

2

1

00

DIFFERENTIAL

PRESSURE

PSID


6 8 10

535G Series Stainless Elements

114136 4500 series r4 2/15/05 2:21 PM

PHONE: 708-233-5521 • FAX: 708-430-5961 4

















Aluminum 5.0 Lbs.Stainless Steel: 13.5 Lbs.10K, 15K, & 20K Stainless: 43 Lbs.

*T.M. DuPont Corp.

5,000 & 6,000PSI UNITS

10,000 & 15,000 & 20,000PSI UNITS

HOW-TO-ORDERPressure Port Size, Type Housng Material Element Code Micron Rating Collapse Rating

Code

12XB3

30305B5

710

B10202540

100200

.5RAFCD

300# Cellulose300# Glass Fiber2000# PSS3250# Glass Fiber4500# Stainless Mesh

2

35

10

202540

100200

.2

.5

—.1

—.5

—

.5 1

1033

1018

57

2510404075

200300

•

•

•

•

•

•

•

•

•••••

Nom. Abs. G A F P

CALL

FACTORY


5K Only6K, 10K, 15K

***

AGT


ADFGP

psipsipsipsipsi

26N26S3646828595

25037556275042S62S

1” NPT1” SAE (–16)3/4” FPT1/2” SAE (–8)1/4” FPT1/2” FPT3/4” SAE (–12)1/4” Medium Pressure*3/8” Medium Pressure*9/16” Medium Pressure*3/4” Medium Pressure*1/4” SAE (–4)3/8” SAE (–6)

50006000

100001500020000

4545

146346546

*10K, 15K & 20K OnlyNote: SAE port notrecommended over6000 psi.Socket weld portsavailable on special order.

ASSEMBLY:


O-Ring Material Optional Accessories

LNEMKH

DR-1DR-2DR-3DR-4

DRCT4DRCT6

EEEER

RS1S2S3S4

SCT4SCT6

VVR









10

9

8

7

6

5

4

3

2

1

00

DIFFERENTIAL

PRESSURE

PSID



12 16 20

1/4” FPT or1/2” SAE


3/4” or1” SAE

10

9

8

7

3µ

10µ

25µ

6

5

4

3

2

1

00

DIFFERENTIAL

PRESSURE

PSID



12 16 20

10

9

8

7

3µ

Low C

ollapse

5µ L

ow Collapse

10µ Low Collapse

5µ H

igh Colla

pse

6

5

4

3

2

1

00

DIFFERENTIAL

PRESSURE

PSID



12 16 20

10

9

8

7

10µ

40µ

100µ

2X6

5

4

3

2

1

00

DIFFERENTIAL

PRESSURE

PSID


12 16 20

10


114136 4500 series r4 2/15/05 2:21 PM

PHONE: 708-233-5521 • FAX: 708-430-59615

















Aluminum 6.0 Lbs.Stainless Steel: 15 Lbs.10K, 15K, & 20K Stainless: 45 Lbs.

*T.M. DuPont Corp.

5,000 & 6,000PSI UNITS

10,000 & 15,000 & 20,000PSI UNITS

HOW-TO-ORDERPressure Port Size, Type Housng Material Element Code Micron Rating Collapse Rating

Code

12XB1B3

30305B5

710

B102025

B2540

100200

.5PRAFCD

150# Cellulose300# Cellulose300# Glass Fiber2000# PSS3250# Glass Fiber4500# Stainless Mesh

2

35

10

2025

40100200

.2

.5

——.1

—

—

—

.5 1

10133

1018

57

251040402575

200300

••

•

•

•

•

•

•

•

•

••

•••

Nom. Abs. G A F P

CALL

FACTORY


5K Only6K, 10K, 15K

***

AGT


ADFGP

psipsipsipsipsi

3747768690929625037556275043S63S

1” NPT1/2” SAE (–8)1” SAE (-16)3/4” FPT1/2” FPT1/4” FPT3/4” SAE (–12)1/4” Medium Pressure*3/8” Medium Pressure*9/16” Medium Pressure*3/4” Medium Pressure*1/4” SAE (–4)3/8” SAE (–6)

50006000

100001500020000

4545

147347547

*10K, 15 & 20K OnlyNote: SAE port notrecommended over6000 psi.Socket weld portsavailable on special order.

ASSEMBLY:



LNEMKH

DR-1DR-2DR-3DR-4

DRCT4DRCT6

EEEER

RS1S2S3S4

SCT4SCT6

VVR









10

9

8

7

6

5

4

3

2

1

00

DIFFERENTIAL

PRESSURE

PSID



15 20 25



3/4” FPT or1” SAE

10

9

8

7

3µ

10µ

25µ

6

5

4

3

2

1

00

DIFFERENTIAL

PRESSURE

PSID



15 20 25

10

9

8

73µ

Low Colla

pse

5µ Low Collapse

10µ Low Collapse

5µ High C

ollapse

6

5

4

3

2

1

00

DIFFERENTIAL

PRESSURE

PSID



15 20 25

10

9

8

7

75µ

2020µ

20µ

2X

6

5

4

3

2

1

00

DIFFERENTIAL

PRESSURE

PSID


15 20 25


114136 4500 series r4 2/15/05 2:21 PM

PHONE: 708-233-5521 • FAX: 708-430-5961 6

587 SIZE 35 GPM / 2500 SCFMSPECIFICATIONSRated Flow @ 10 PSID, clean (max.): 35 GPM (w/100 SSU oil)

2500 SCFM (@ 3,000 PSI, GN2)Housing Material: 5,000 PSI Units: 7075T6 Aluminum

6,000 PSI Units: 303 & 316 Stainless SteelPressure Ratings: 5,000 PSI Units: 5,000 PSI Operating

7,500 PSI Proof20,000 PSI Burst

6,000 PSI Units: 6,000 PSI Operating9,000 PSI Proof24,000 PSI Burst

O-Ring Temperature Range: Buna-N: -40°F to +250°FViton: -20°F to +350°F

Ethylene Propylene: -65°F to +300°FTeflon*: -320°F to +400°FKalrez* -40°F to +600°F

Element Temperature Range: Cellulose: -65°F to +275°FGlass Fiber: -70°F to 350°F

304 Stainless: -425°F to 1,000°FOptions: Relief Valve Setting: 50 PSID

Visual Indicator Setting: 40 PSIDElectrical Indicator Setting: 40 PSID

Electrical Indicator Current Rating: 0.5 Amps ResistiveTotal Assembly Weight: Aluminum 11.5 Lbs.

Stainless Steel: 29 Lbs.*T.M. DuPont Corp.

5,000 & 6,000PSI UNITS

HOW-TO-ORDERPort Size, Type Housng Material Element Code Micron Rating

Code

12XB3

30305B5

710

B10202540

100200

.5

2

35

10

202540

100200

.2

.5

—.1

—.5

—

.5 1

1033

1018

57

2510404075

200300

•

•

•

•

•

•

•

•

•••••

Nom. Abs. G A F P

CALL

FACTORY


5K Only6K, 10K, 15KConsultfactory forpressureratings.

***

AGT


ADFGP

236877798797

1-1/2” NPT1-1/2” SAE (–24)1-1/4” SAE (-20)1“ SAE (-16)1” FPT1-1/4” NPT

Socket weld portsavailable on specialorder.

ASSEMBLY:


4 5


LNEMKH

DR-1DR-2DR-3DR-4EE

EERRS1S2S3S4V

VR

1/8” NPT Bowl Drain1/4” NPT Bowl Drain1/8” SAE Bowl Drain1/8” SAE Bowl Drain40 psid Elec. SwitchSwitch + Valve50 psid Valve1/8” NPT DP Ports1/4” NPT DP Ports1/8” SAE DP Ports1/4” SAE DP Ports40 psid IndicatorIndicator + Valve



Collapse Rating

RAFCD






10

9

8

7

6

5

4

3

2

1

00

DIFFERENTIAL

PRESSURE

PSID



30 40 50

3/4”

FPT

or1”

SAE

1” F

PT or

1-3/

4” S

AE

3/4” FPT or

1-1/2” SAE

10

9

8

7

3µ

10µ

25µ

6

5

4

3

2

1

00

DIFFERENTIAL

PRESSURE

PSID



30 40 50

10

9

8

7

Low C

olla

pse

3

µ

Low Colla

pse 5

µ

Low Collapse 10µ

High C

ollap

se

5µ

6

5

4

3

2

1

00

DIFFERENTIAL

PRESSURE

PSID



30 40 50

10

9

8

7

75µ

20µ2X

6

5

4

3

2

1

00

DIFFERENTIAL

PRESSURE

PSID



30 40 50

114136 4500 series r4 2/15/05 2:21 PM

Chris-L

Stamp

PHONE: 708-233-5521 • FAX: 708-430-59617

588 SIZE 50 GPM / 4000 SCFMSPECIFICATIONSRated Flow @ 10 PSID, clean (max.): 50 GPM (w/100 SSU oil)

4000 SCFM (@ 3,000 PSI, GN2)Housing Material: 5,000 PSI Units: 7075T6 Aluminum

6,000 PSI Units: 303 & 316 Stainless SteelPressure Ratings: 5,000 PSI Units: 5,000 PSI Operating

7,500 PSI Proof20,000 PSI Burst

6,000 PSI Units: 6,000 PSI Operating9,000 PSI Proof24,000 PSI Burst

O-Ring Temperature Range: Buna-N: -40°F to +250°FViton: -20°F to +350°F

Ethylene Propylene: -65°F to +300°FTeflon*: -320°F to +400°FKalrez* -40°F to +600°F

Element Temperature Range: Cellulose: -65°F to +275°FGlass Fiber: -70°F to 350°F

304 Stainless: -425°F to 1,000°FOptions: Relief Valve Setting: 50 PSID

Visual Indicator Setting: 40 PSIDElectrical Indicator Setting: 40 PSID

Electrical Indicator Current Rating: 0.5 Amps ResistiveTotal Assembly Weight: Aluminum 12.5 Lbs.

Stainless Steel: 30.5 Lbs.

*T.M. DuPont Corp.

5,000 & 6,000PSI UNITS

HOW-TO-ORDERMicron Rating

Code

12XB1B3

30305B5

710

B102025

B2540

100200

.5

2

35

10

2025

40100200

.2

.5

——.1

—

—

—

.5 1

10133

1018

57

251040402575

200300

••

•

•

•

•

•

•

•

•

••

•••

Nom. Abs. G A F P

CALL

FACTORY

Port Size, Type Housng Material Element Code Collapse Rating

RAFCD



5K Only6K, 10K, 15KConsultfactory forpressureratings.

***

AGT


ADFGP

247880889899

1-1/2” NPT1-1/2” SAE (–24)1” SAE (–16)1-1/4” NPT 1” NPT1-1/4” SAE (–20)

Socket weld portsavailable on specialorder.

ASSEMBLY:


4 5


LNEMKH

DR-1DR-2DR-3DR-4EE

EERRS1S2S3S4V

VR

1/8” NPT Bowl Drain1/4” NPT Bowl Drain1/8” SAE Bowl Drain1/8” SAE Bowl Drain40 psid Elec. SwitchSwitch + Valve50 psid Valve1/8” NPT DP Ports1/4” NPT DP Ports1/8” SAE DP Ports1/4” SAE DP Ports40 psid IndicatorIndicator + Valve







10

9

8

7

6

5

4

3

2

1

00

DIFFERENTIAL

PRESSURE

PSID



30 40 50

3/4”

FPT

or

1” S

AE1”

FPT o

r

1-1/

4” S

AE

1-1/4” FPT or

1-1/2” SAE

10

9

8

7

3µ

10µ

25µ

6

5

4

3

2

1

00

DIFFERENTIAL

PRESSURE

PSID



30 40 50

10

9

8

7

3µ L

ow Colla

pse

5µ Low Collapse

10µ Low Collapse

5µ H

igh Colla

pse

6

5

4

3

2

1

00

DIFFERENTIAL

PRESSURE

PSID



30 40 50

10

9

8

7

75µ

20µ

2X

6

5

4

3

2

1

00

DIFFERENTIAL

PRESSURE

PSID



30 40 50

114136 4500 series r4 2/15/05 2:21 PM

Chris-L

Stamp

NORMAN FILTER COMPANYContinuous Product Improvement

Manufactured in Bridgeview, Illinois byNorman Filter Company, the redesigned15,000 psi filter housing offers fivenew exciting options:• 316SS• Bypass• Visual indicator• Explosion Proof Electrical Indicator• Electrical Indicator

NORMAN FILTER COMPANY, L.L.C.9850 SOUTH INDUSTRIAL DRIVEBRIDGEVIEW, ILLINOIS 60455PHONE: 708-233-5521FAX: 708-430-5961EMAIL: [email protected]

DISTRIBUTED BY:

Form E Rev. 1/05

T-TYPE FILTER – OPTIONAL ACCESSORIESCODE RRelief Valve1. Flush mounting

SAE plug2. Aluminum or

stainless spacers3. Stainless Spring4. Teflon* ball or

poppet

*T.M. DuPont Corp.

ByPass Relief Valve At a predetermined setting, thesystem fluid bypasses the element assembly until theelement either is cleaned or replaced. Standard setting50 psi craking pressure. Other settings from 15-150psid available on special order.

CODE DRBowl Drain:

1/4” MP DRCT4 1/8” NPT DR-1 1/8” SAE DR-33/8” MP DRCT6 1/4” NPT DR-2 1/4” SAE DR-4

CODE SDifferential Pressure Ports:

1/4” MP SCT4 1/8” NPT S-1 1/8” SAE S-33/8” MP SCT6 1/4” NPT S-2 1/4” SAE S-4

Visual Differential Pressure Indicator Enablesoperator to read contaminated build up before theelement is plugged. Indicator is mounted on headof filter unit. Automatic reset. Aluminum isanodized for corrosion. Also available in StainlessSteel. Standard setting is 40 psid. Other settingsform 15-100 psid available on special order.

CODE VRVisual dP Indicator and Bypass Relief ValveEnables the operator to see red indicator before reliefvalve opens, providing ample time to change the element before dirty fluid bypasses the filter.

Electrical Differential Pressure Indicator Ideal forapplications where visual inspections are difficult dueto location or where centralized process equipmentmonitoring is desired. By wiring the indicator into acentral control panel, filter may be remotely monitoredquickly and easily. The indicator, made of anodizedcorrosion resistant aluminum or 303 stainless steel, ismounted on top of the filter unit. An adjustable electric,normally open, reed switch dP indicator operated signaldevices. Contacts closed when dP increases, and automatically resets when dP decreases. 3/4” male pipeconnection for electrical hook-up. Voltage requirements:10W – DC resistive 10 VA – AC resistive. Switch current0.5 amps. Relay required for heavier loads.

CODE EEREE dP Indicator and Bypass Relief Valve This com-bination enables monitor to receive signal in advance ofbypass relief valve actuation.

114136 4500 series r4 2/15/05 2:21 PM

r Norman 4500, 14500, 34500 & 54500 Series Tee-Type Filtersku-chabell.com/img/file7.pdfUp to 20,000...

Documents

Transcript of r Norman 4500, 14500, 34500 & 54500 Series Tee-Type Filtersku-chabell.com/img/file7.pdfUp to 20,000...