Quarterly CREATE YOUR STYLE reports

Spring/Summer 2017 Innovation Design

Projects

M I N I P R O J E C T S 1 / 3 0 C R E A T E - Y O U R - S T Y L E . C O M

Graphite Double Row Necklace Materials: Swarovski crystals

Product Group

Article No.

Amount Size Color Color Code

Beads 5000 64 pcs 6mm Graphite 253 Beads 5328 24 pcs 3mm Crystal Lt Chrome 001 LTCH Beads 5328 52 pcs 4mm Crystal Lt Chrome 2X 001 LTCH Beads 5328 64 pcs 6mm Graphite 253 Beads 5728 16 pcs 12mm Jet 280 Crystal Pearls 5810 20 pcs 4mm Crystal Light Grey 001 731 Crystal Pearls 5810 12 pcs 5mm Crystal Light Grey 001 731 Crystal Pearls 5810 48 pcs 8mm Crystal Light Grey 001 731

Supplies: 4 2” Headpins 8 2x2 crimp beads 8 3mm crimp covers 2 8mm jump rings 1 Medium lobster clasp 2 Classic Links TierraCast® 94-3030-12 1 Beaded 5 Hole Bar TierraCast® 94-3051-12 80” beading wire


Graphite Double Row Necklace Instructions Step 1: Using one headpin, slide on one 5328 3mm Lt Chrome, one 5728 12mm Scarab Bead Jet, and

one 5328 3mm Lt Chrome and wire wrap closed. Repeat 3 more times and set aside.

Step 2: Cut Beading wire into four 20” pieces. Using one piece of wire slide on one crimp bead, one Scarab Bead drop from Step 1 and crimp closed. Add crimp cover. Repeat 3 more times and set aside.

Step 3: Take one wire strand from Step 2 and slide on one 5328 4mm Lt Chrome 2X, one 5810 5mm Lt Grey pearl, five 5328 6mm Graphite, three 5810 Lt Grey Pearl, four 5000 6mm Graphite, three 5810 Lt Grey Pearl, four 5000 6mm Graphite, five 5328 6mm Graphite, one 5810 5mm Lt Grey pearl, and one 5328 4mm Lt Chrome 2X. Now slide the wire through the #1 hole in the 5 Hole Bar. Continue sliding on one 5328 4mm Lt Chrome 2X, one 5810 5mm Lt Grey pearl, five 5328 6mm Graphite, one 5328 3mm Lt Chrome, one 5728 12mm Scarab Bead Jet, one 5328 3mm Lt Chrome, one 5728 12mm Scarab Bead Jet, one 5328 3mm Lt Chrome, one 5728 12mm Scarab Bead Jet, one 5328 3mm Lt Chrome, one 4mm 5328 Lt Chrome 2X, one 5810 4mm Lt Grey Pearl, one 4mm 5328 Lt Chrome 2X, one 5810 4mm Lt Grey Pearl, one 4mm 5328 Lt Chrome 2X, one 5810 4mm Lt Grey Pearl, one 4mm 5328 Lt Chrome 2X, one 5810 4mm Lt Grey Pearl, one 4mm 5328 Lt Chrome 2X, one 5810 4mm Lt Grey Pearl, three 4mm 5328 Lt Chrome 2X, one 5328 6mm Graphite, four 5000 6mm Graphite, three 5810 Lt Grey Pearl, four 5000 6mm Graphite, three 5810 Lt Grey Pearl, and one 4mm 5328 Lt Chrome 2X. Slide on crimp and one side of the Classic Link, crimp to close. Attach crimp cover.

Step 4: Repeat Step 3 with two exceptions. Slide beading wire through the #5 hole in the 5-hole bar and crimp to close to the second Classic Link on opposite side.

Step 5: Take one wire strand from Step 2 and slide on one 5328 4mm Lt Chrome 2X, one 5810 5mm Lt Grey pearl, five 5328 6mm Graphite, four 5000 6mm Graphite, three 5810 Lt Grey Pearl, four 5000 6mm Graphite, three 5810 Lt Grey Pearl, five 5328 6mm Graphite, one 5810 5mm Lt Grey pearl, and one 5328 4mm Lt Chrome 2X. Now slide the wire through the #2 hole in the 5 Hole Bar. Continue sliding on one 5328 4mm Lt Chrome 2X, one 5810 5mm Lt Grey pearl, five 5328 6mm Graphite, one 4mm 5328 Lt Chrome 2X, one 5810 4mm Lt Grey Pearl, one 4mm 5328 Lt Chrome 2X, one 5810 4mm Lt Grey Pearl, one 4mm 5328 Lt Chrome 2X, one 5810 4mm Lt Grey Pearl, one 4mm 5328 Lt Chrome 2X, one 5810 4mm Lt Grey Pearl, one 4mm 5328 Lt Chrome 2X, one 5810 4mm Lt Grey Pearl, one 4mm 5328 Lt Chrome 2X, one 5328 3mm Lt Chrome, one 5728 12mm Scarab Bead Jet, one 5328 3mm Lt Chrome, one 5728 12mm Scarab Bead Jet, one 5328 3mm Lt Chrome, one 5728 12mm Scarab Bead Jet, one 5328 3mm Lt Chrome, three 4mm 5328 Lt Chrome 2X, one 5328 6mm Graphite, three 5810 Lt Grey Pearl, four 5000 6mm Graphite, three 5810 Lt Grey Pearl, four 5000 6mm Graphite, and one 4mm 5328 Lt Chrome 2X. Slide on crimp and second side of the first Classic Link from Step 3, crimp to close. Attach crimp cover.

Step 6: Repeat Step 5 with two exceptions. Slide beading wire through the #4 hole in the 5-hole bar and crimp to close to the second Classic Link on opposite side.

Step 7: Add one jump ring on one side of the Classic Link. Using a jump ring add the lobster clasp to the other side of the Classic Link.


All Wrapped Up Bracelet Materials: Swarovski crystals

Product Group Article No. Amount Size Color Color Code Beads 5000 30 pcs 6mm Graphite 253 Beads 5328 20 pcs 3mm Graphite 253 Beads 5328 36 pcs 4mm Graphite AB 253 AB Beads 5328 33 pcs 6mm Graphite 253 Pendants 6000 30 pcs 11x5.5mm Graphite 253 Pendants 6106 6 pcs 16mm Graphite 253

Supplies: 6 6mm jump rings 4 ½ rings of bracelet memory wire Instructions Step 1: Using a round nose plier turn one end of the memory wire backwards creating a closed loop.

Step 2: Slide on three 4mm 5328 Graphite AB.

Step 3: In pattern slide on three 6mm 5328 Graphite, three 4mm 5328 Graphite AB, three 6mm 5000 Graphite, one 3mm 5328 Graphite, three 11x5.5mm 6000 and one 3mm 5328 Graphite. Repeat this pattern nine more times. Then slide on three 6mm 5328 Graphite, and three 4mm 5328 Graphite AB. Turn the other end of the memory wire backwards creating a closed loop.

Step 4: Using a jump ring attach one 16mm 6106 Graphite to the closed loop at one end of the bracelet. Repeat two more times.

Step 5: Repeat Step 4 on other end of bracelet to finish.


Graphite Drops Earrings Materials: Swarovski crystals

Product Group Article No. Amount Size Color Color Code Flatback No Hot Fix 2088 2 pcs Ss34 Graphite 253 Pendant 6106 2 pcs 16mm Graphite 253

Supplies: 2 Stepped Bezel Posts TierraCast® 94-1078-61 2 6mm jump rings 5 minute two part epoxy Instructions Step 1: Mix small amount of the epoxy. Using one bezel post glue in one ss34 2088 Graphite and set

aside. Repeat for second post. Let dry completely

Step 2: Using one jump ring attach one 16mm 6106 Pendant Graphite to the bottom of the Bezel Post. Repeat to make second earring.


Yellow Opal Twist Necklace Materials: Swarovski crystals

Product Group Article No. Amount Size Color Color Code

Beads 5328 36 pcs 4mm Yellow Opal AB2X 231 AB2X Beads 5328 90 pcs 4mm Yellow Opal 231 Beads 5328 21 pcs 6mm Yellow Opal 231 Beads 5000 18 pcs 6mm Yellow Opal 231 Crystal Pearls 5810 90 pcs 4mm Crystal Pearlescent White 001 969 Crystal Pearls 5810 42 pcs 8mm Crystal Pearlescent White 001 969

Supplies: 8 copper 2x2 crimp beads 8 copper 3mm crimp covers 4 8mm copper jump rings 18 6mm copper oval jump rings 1 Celtic S Hook TierraCast® 94-6032-18 8 ¾” Woven Disk Link TierraCast® 94-3149-18 72” Beading wire


Yellow Opal Twist Necklace Instructions Step 1: Cut the beading wire into four 18” pieces and set aside

Step 2: Using one piece of wire slide on one crimp bead and crimp it closed to one 8mm jump ring. Crimp on one crimp cover. Slide on ninety 4mm 5810 Pearlescent White pearls. Then slide on one crimp bead and crimp it closed to another 8mm jump ring. Crimp on one crimp cover.

Step 3: Using one piece of wire slide on one crimp bead and crimp it closed to one side of the original 8mm jump ring from Step 2. Slide on ninety 4mm 5328 Yellow Opal. Then slide on one crimp bead and crimp it closed to the 8mm jump ring from the opposite side of the original jump ring in Step 2. Crimp on one crimp cover.

Step 4: Using one piece of wire slide on one crimp bead and crimp it closed to one side of the original 8mm jump ring from Step 2. Slide on forty two 8mm 5810 Pearlescent White pearls. Then slide on one crimp bead and crimp it closed to the 8mm jump ring from the opposite side of the original jump ring in Step 2. Crimp on one crimp cover.

Step 5: Using one piece of wire slide on one crimp bead and crimp it closed to one side of the original 8mm jump ring from Step 2. Slide on three 4mm 5328 Yellow Opal AB2X, three 6mm 5000 Yellow Opal, three 4mm 5328 Yellow Opal AB2X, three 6mm 5328 Yellow Opal. Repeat this pattern 5 times. Then slide on one crimp bead and crimp it closed to the 8mm jump ring from the opposite side of the original jump ring in Step 2. Crimp on one crimp cover.

Step 6: Using one Woven Disk Link attach to a second Woven Disk Link with 3 oval jump rings. Repeat 2 more times so that you have 4 linked disks. On one end attach an 8mm jump ring. Attach the other end of the disks to the original 8mm jump ring from Step 2.

Step 7: Using one Woven Disk Link attach to a second Woven Disk Link with 3 oval jump rings. Repeat 2 more times so that you have 4 linked disks. On one end attach an 8mm jump ring and the Celtic S Hook. Attach the other end of the disks to the original 8mm jump ring from Step 2.


Lemon Drops Earrings Materials: Swarovski crystals

Product Group Article No.


Pendants 6428 10 pcs 8mm Yellow Opal 231 Flatback No Hot Fix 2088 2 pcs Ss34 Yellow Opal F 231

Supplies: 2 Stepped Bezel Posts TierraCast® 94-1078-18 30 4mm oval jump rings copper 2 small 5 hole D Rings TierraCast® 94-6174-18 5 minute two part epoxy Instructions Step 1: Mix small amount of the epoxy. Using one bezel post glue in one ss34 2088 Yellow Opal and

set aside. Repeat for second post.

Step 2: Using one jump ring open and slide on one 8mm 6428 yellow opal pendant and attach it directly to the first hole in the 5-hole D Ring.

Step 3: Using one jump ring open and slide on one 8mm 6428 yellow opal pendant and close the jump ring. Continue to attach two more jump rings creating a small chain. Attach the third jump ring directly to the second hole in the 5-hole D Ring.

Step 4: Using one jump ring open and slide on one 8mm 6428 yellow opal pendant and close the jump ring. Continue to attach four more jump rings creating a small chain. Attach the fifth jump ring directly to the third hole in the 5-hole D Ring.

Step 5: Using one jump ring open and slide on one 8mm 6428 yellow opal pendant and close the jump ring. Continue to attach two more jump rings creating a small chain. Attach the third jump ring directly to the fourth hole in the 5-hole D Ring.

Step 6: Using one jump ring open and slide on one 8mm 6428 yellow opal pendant and attach it directly to the fifth hole in the 5-hole D Ring.

Step 7: Using one jump ring attach the top of the D ring to the Bezel earring post from Step 1. Attach a second jump ring to secure the D Ring.

Step 8: Repeat Steps 2 – 7 to make second earring.


Crystal Jellyfish Earrings Materials: Swarovski crystals

Product Group Article No.


Fancy Stone 4195 2 pcs 14mm Crystal 001 Pave Pendant 67492 2 pcs 20mm White opal/Crystal Moonlight 234/001 MOL

Supplies: 2 14mm faceted Rivoli links TierraCast® 94-3153-61 2 4mm oval jump rings silver 2 ear wires 5 minute two part epoxy Instructions Step 1: Mix small amount of the epoxy. Using one Rivoli link glue in one 14mm 4195 Jelly Fish Fancy

Crystal and set aside. Repeat for second link. Let dry completely

Step 2: Using jump ring attach Pave pendant to bottom of Rivoli link from Step 1. Attach ear wire to top of the Rivoli link.

Step 3: Repeat Step 2 to make the second earring.


Bubbling Up Necklace Materials: Swarovski crystals


Beads 5028/4 2 pcs 6mm Crystal Luminous Green 001 LUMG Beads 5028/4 20 pcs 8mm Crystal Luminous Green 001 LUMG Rivoli 1122 1 pc 14mm Crystal Luminous Green 001 LUMG Pendants 6730 1 pc 34x22mm Crystal Luminous Green 001 LUMG

Supplies: 1 medium lobster clasp 11 10mm jump rings 2 14mm faceted Rivoli links TierraCast® 94-3153-27 22” 20 gauge wire 5 minute two part epoxy

M I N I P R O J E C T S 1 0 / 3 0 C R E A T E - Y O U R - S T Y L E . C O M

Bubbling Up Necklace Instructions Step 1: Using the 20 gauge wire cut it into twenty two 1” pieces and set aside.

Step 2: Mix small amount of the epoxy. Using one Rivoli link glue in one 14mm 1122 Rivoli Crystal Luminous Green and set aside. Let dry completely

Step 3: Using one piece of 20 gauge wire make a simple loop at one end. Slide on one 8mm 5028/4 Globe Bead in Crystal Luminous Green and make a simple loop to close. Repeat this 19 more times and set aside.

Step 4: Using one piece of 20 gauge wire make a simple loop at one end. Slide on one 6mm 5028/4 Globe Bead in Crystal Luminous Green and make a simple loop to close. Repeat this one more time and set aside.

Step 5: To create the left side of the chain begin linking together the 8mm globe beads created in step 3 using 12 links. At the bottom of the chain attach one 6mm globe bead link from Step 4 and then attach this to one end of the Rivoli link from Step 2. Attach Lobster clasp to other end.

Step 6: To create the right side of the chain begin with a 10mm jump ring and attach one 8mm globe bead link from Step 3. Repeat this pattern seven more times. Add one 10mm jump ring then attach one 6mm globe bead link from Step 4 and then attach this to one end of the Rivoli link from Step 2.

Step 7: Using one 10mm jump ring attach the 34mm 6730 Radiolarian Pendant in Crystal Luminous Green to the other end of the Rivoli link. Attach a second 10mm jump ring to secure.


Bubbling Up Earrings Materials: Swarovski crystals


Beads 5028/4 2 pcs 6mm Crystal Luminous Green 001 LUMG Pendants 6730 2 pcs 18x11.5mm Crystal Luminous Green 001 LUMG

Supplies: 2 ear wires 2 10mm jump rings 2 4mm jump rings 2” 20 gauge wire Instructions Step 1: Using the 20 gauge wire cut it into two 1” pieces and set aside.

Step 2: Using one piece of 20 gauge wire make a simple loop at one end. Slide on one 6mm 5028/4 Globe Bead in Crystal Luminous Green and make a simple loop to close. Repeat this one more time and set aside.

Step 3: Using one 4mm jump ring attach one 6730 18mm Radiolarian pendant Crystal Luminous Green to one 10mm jump ring. Now attach one globe bead link from Step 2 to the 10mm jump ring. Finally attach the ear wire to the globe bead link. Repeat to make second earring.


Raindrop Necklace Materials: Swarovski crystals

Product Group Article No. Amount Size Color Color Code Pendant 6533 2 pcs 17.5mm Crystal AB 001 AB Pendant 6533 2 pcs 23mm Crystal AB 001 AB Pendant 6533 1 pcs 33mm Crystal AB 001 AB

Supplies: 1 small lobster clasp 8 6mm jump rings 1 Beaded 5-1 Link TierraCast® 94-3056-12 18” Brass Cable Chain 2x3mm TierraCast® 20-0725-63


Raindrop Necklace Instructions Step 1: Using one jump ring attach one 17.5mm 6533 Raindrop pendant Crystal AB to the first ring

on the Beaded Link.

Step 2: Using one jump ring attach one 23mm 6533 Raindrop pendant Crystal AB to the second ring on the Beaded Link.

Step 3: Using one jump ring attach one 33mm 6533 Raindrop pendant Crystal AB to the third ring on the Beaded Link.

Step 4: Using one jump ring attach one 23mm 6533 Raindrop pendant Crystal AB to the fourth ring on the Beaded Link.

Step 5: Using one jump ring attach one 17.5mm 6533 Raindrop pendant Crystal AB to the fifth ring on the Beaded Link.

Step 6: Attach one jump ring to the top of the Beaded Link. Slide through the cable chain.

Step 7: Using a jump ring attach to one end of the chain. Using a second jump ring attach the lobster clasp to the other end of the chain.


Raindrop Earrings Materials: Swarovski crystals

Product Group Article No. Amount Size Color Color Code Pendant 6533 4 pcs 17.5mm Crystal AB 001 AB Pendant 6533 2 pcs 23mm Crystal AB 001 AB

Supplies: 2 Ear Wires 6 6mm jump rings 2 Beaded 3-1 Link TierraCast® 94-3055-12 Instructions Step 1: Using one jump ring attach one 17.5mm 6533 Raindrop pendant Crystal AB to the first ring

on the Beaded Link.

Step 2: Using one jump ring attach one 23mm 6533 Raindrop pendant Crystal AB to the second ring on the Beaded Link.

Step 3: Using one jump ring attach one 17.5mm 6533 Raindrop pendant Crystal AB to the third ring on the Beaded Link.

Step 4: Attach ear wire to the top of the Beaded Link.

Step 5: Repeat Steps 1 – 4 to make second earring.


Under the Sea Necklace Materials: Swarovski crystals

Product Group Article No. Amount Size Color Color Code Beads 5328 100 pcs 4mm Crystal Bermuda Blue 001 BBL Pendants 6730 4 pcs 18x11.5mm Crystal Bermuda Blue 001 BBL Pendants 6731 1 pcs 28mm Crystal Bermuda Blue 001 BBL

Supplies: 1 10mm jump rings 24” 0.5mm black leather cord 1 ½” Anna Toggle TierraCast® 94-6154-12 2 2mm crimps 2 3mm crimp covers 20” beading wire


Under the Sea Necklace Instructions Step 1: Attach one 10mm jump ring through the bead hole on article 6731.

Step 2: Cut the leather into two equal pieces fold both pieces in half and insert the loops into the cut-out hole on article 6731. Pull the tails through the loops (keeping loops even and together) and pull taut.

Step 3: Decide where to place each article 6730 on the four pieces on leather. Indicate the spot by marking the leather.

Step 4: Slip on 1 article 6730 onto the first leather dangle. Slide it past the knot indicator. Create an overhand knot. Repeat for the other three pendants. Optional: you may choose to trim the tails at this point. Note: if the leather is from a small spool, it will curl on itself. With time the leather will relax.

Step 5: Using the beading wire, crimp on one side of the toggle clasp and attach the crimp bead cover. String onto the beading wire enough 4mm 5328 crystals for your desired length. Next, slip the beaded wire through the jump ring from step 1. Crimp the second side of the toggle clasp and attach the crimp cover.


Under the Sea Bracelet Materials: Swarovski crystals


Round Stones 1695 6 pcs 14mm Crystal Bermuda Blue 001 BBL Pendants 6730 3 pcs 18x11.5mm Crystal Bermuda Blue 001 BBL Pendants 6731 2 pcs 14mm Crystal Bermuda Blue 001 BBL

Supplies: 14 8mm jump rings 25 4mm jump rings 6 14mm faceted Rivoli links TierraCast® 94-3153-25 1 Craftsman Toggle TierraCast® 94-6205-25 3 Seahorse Charm TierraCast® 94-2236-26 3 Abalone Shell Charm TierraCast® 94-2235-26 2 Seastar Charm TierraCast® 94-2232-26 2 Large Spindle Shell TierraCast® 94-2233-26 5 minute two part epoxy


Under The Sea Bracelet Instructions Step 1: Mix small amount of the epoxy. Using one Rivoli link glue in one 14mm 1695 Sea Urchin

Crystal Bermuda Blue and set aside. Repeat five more times. Let dry completely

Step 2: Using two 8mm jump rings attach two links from Step 1 to each other. Continue using two jump rings to attach the rest of the links together. Using another two 8mm jump rings attach one end of the toggle to one end of the linked bracelet. Repeat for the other side.

Step 3: Using one 4mm jump ring open and slide on one 18mm 6730 Radiolarian Pendant Crystal Bermuda Blue and close. Attach two more 4mm jump rings to create a chain. Repeat this step two more times and set aside.

Step 4: Using one 4mm jump ring open and slide on one 14mm 6731 Sea Snail Pendant Crystal Bermuda Blue and close. Attach two more 4mm jump rings to create a chain. Repeat this step one more time and set aside.

Step 5: Taking one of these drops from Step 3 attach to the double jump rings between links 1 & 2 on the bracelet. Repeat this two more times. Once between links 3 & 4 and again between 5 & 6.

Step 6: Taking one of these drops from Step 4 attach to the double jump rings between links 2 & 3 on the bracelet. Repeat this one more time between links 4 & 5.

Step 7: Using 4mm jump rings begin to attach the sea life charms randomly between all the links (2 per link).


Under the Sea Earrings Materials: Swarovski crystals


Pendants 6731 2 pcs 14mm Crystal Bermuda Blue 001 BBL Supplies: 2 8mm jump rings 2 4mm jump rings 2 44mm Kidney ear wires Beadalon® 308B-320 Instructions Step 1: Using one 8mm jump ring slide on one 14mm 6731 Sea Snail Pendant Crystal Bermuda Blue

and close. Using one 4mm jump ring attach the pendant to the ear wire.

Step 2: Repeat Step 1 to make second earring.


Roaring Paw Prints Necklace Materials: Swarovski crystals

Product Group Article No. Amount Size Color Color Code Panther Bead 5751 1 pc 14mm Crystal Silver Night 2X 001 SINI 2X

Pave Leopard Bead

81974 1 pc 10mm Black Diamond/Crystal Silver Shade/White Opal/Jet Hematite

215/001 SSH/234/280 HEM

Supplies: 2 10mm oval jump rings 4” 20 gauge wire 9” Flattened Brass Cable Chain 4x2.5mm TierraCast® 20-0125-13 30” 1mm black leather


Roaring Paw Prints Necklace Instructions Step 1: Cut cable chain into two 1 ½” pieces, two 1 ¾” pieces and one 2” piece and set aside

Step 2: Cut 20 gauge wire into two 2” pieces.

Step 3: Using one piece of 20 gauge wire make a simple loop, slide on one Panther bead and wire wrap tightly to the top end of the panther head.

Step 4: Using the second piece of 20 gauge wire make a simple loop, slide on the Leopard bead and finish with a simple loop on the other side.

Step 5: Using one 10mm oval jump ring open and slide on all five pieces of chain cut in Step 1 and attach to one end of the Leopard bead link made in Step 4. Using one 10mm oval jump ring connect the top of the Leopard bead link to the bottom of the Panther Head bead link made in Step 3.

Step 6: Using the leather cord make a slip knot to the top of the Panther Head bead link and tie a knot at the other end to close.


Jungle Cat Necklace Materials: Swarovski crystals

Product Group Article No. Amount Size Color Color Code Panther Bead 5751 1 pc 19mm Crystal Rose Gold 2X 001 ROGL 2X

Supplies: 11 8mm jump rings 2ft 1mm black leather cord 22” Brass Cable Chain 6x4mm TierraCast® 20-0425-18 2” Brass Cable Chain 5x6mm TierraCast® 20-0825-18 1 medium lobster clasp 5 Quartz beads (center drilled, ~1-1.5” in length with a 2mm hole) 4 1.5” metal dagger pendants (in different metal finishes)


Jungle Cat Necklace Instructions Step 1: Cut the 1mm black leather cord into two equal pieces. Using one piece, fold in half and thread the cut ends through the top of article 5751 from the head down, leaving a loop at the top of the head approximately 6mm. Using the two cut ends at the bottom article 5751, create another 6mm loop with the leather and tie a double overhand knot between the loop created and the bottom hole of article 5751. Nip the tails to the desired length. Step 2: Attach two 8 mm jump rings through the bottom loop on article 5751 and the 2” brass cable chain (5x6mm). Using the 8mm jump rings attach the four metal dagger pendants to the cable chain (just added) where desired. Step 3: Using the remaining leather, create a 6mm loop on one end and create an overhand knot to hold the loop in place. Slip on one quartz bead on the open end of the leather and tie an overhand knot next to the bead hole. Repeat four more times. After the last quartz bead is in place, create a 6mm loop and tie another overhand knot next to the bead hole. Nip the tails on both ends to the desired length. Step 4: Attach two more jump rings to the top loop of article 5751 and one of the loops made on the bead unit of step 3. Step 5: Slip the brass cable chain 6x4mm through the two jump rings attached in step 4 at the top of the quartz bead component. Attach one jump ring at the end of the chain and attach the lobster clasp to the opposite side of the chain.


Jungle Cat Earrings Materials: Swarovski crystals

Product Group Article No. Amount Size Color Color Code Panther Bead 5751 2 pc 14mm Crystal Rose Gold 2X 001 ROGL 2X

Supplies: 10 8mm jump rings 2 ear wires 12” 24 gauge wire 2” Brass Cable Chain 5x6mm TierraCast® 20-0825-18 6 1.5” metal dagger pendants (in different metal finishes) Instructions Step 1: Cut the 24g wire into two equal pieces. Using one piece, create a loop in the middle of the wire

fold the wire in half to have the loop at the top and the two tails parallel to each other. Slip both tails through the top hole of article 5751. Wire wrap a loop at the bottom bead hole using both pieces. Repeat for second bead, article 5751.

Step 2: Cut the brass cable chain into two equal pieces. Using a jump ring attach the chain to the wired loop just made in step 1. Using 3 more jump rings, attach 3 daggers where desired in the chain. Repeat for second bead unit.

Step 3: Attach one jump ring to the top loop on article 5751. Attach one ear wire to the jump ring added. Repeat for the second bead unit.


Follow the Leader Bracelet Materials: Swarovski crystals

Product Group Article No. Amount Size Color Color Code Scarab Bead 5728 5 pcs 12mm Crystal Scarabaeus Green 001 SCGR

Supplies: 4 8mm jump rings 1 Renaissance Toggle TierraCast® 94-6208-25 2 Plain Strap Tips TierraCast® 94-3175-25 2 4mm Compression Rivet TierraCast® 01-0060-25 1 10” x ½” Turquoise Leather Strap TierraCast® 21-0010-10 1 Size 10 bead weaving needle 2ft of Size 8# Fireline beading thread. Instructions Step 1: Using the needle and thread (doubled), sew on the 5 scarab beads in the center of the

turquoise leather strap, keeping the scarab beads facing the same direction.

Step 2: Decide the finished length of the bracelet, keeping in mind the addition of the toggle clasps. Trim the leather to the desired length.

Step 3: Mark off each end of the leather for the rivet position. Punch a hole in the leather using a leather punch tool. Using the Plain Strap Tips, rivet one to each end of the leather. See http://tinyurl.com/tci-leather for additional instructions on riveting.

Step 4: Using two jump rings, attach one end of the toggle to the loop on the plain strap tip. Repeat for the second side.


http://tinyurl.com/tci-leather

Follow the Leader Earrings Materials: Swarovski crystals

Product Group Article No. Amount Size Color Color Code Scarab Bead 5728 2 pcs 12mm Crystal Scarabaeus Green 001 SCGR

Supplies: 4 6mm jump rings 4 3.7mm Eyelet TierraCast® 01-0080-09 1 10” x ½” Turquoise Leather Strap TierraCast® 21-0010-10 2 ear wires 2 24 gauge 1 ½” balled headpin Instructions Step 1: Cut two 1” pieces of leather (or use the remnant pieces from the bracelet project).

Step 2: Mark two spots on each piece of leather where the eyelets will be positioned. Punch a hole through the leather where indicated.

Step 3: Attach one eyelet to each hole made in step 2. See http://tinyurl.com/tci-leather for additional information regarding the attachment of the eyelets. Set pieces aside

Step 4: Using one headpin, slip on one scarab bead and wire wrap a small loop. Repeat for the second bead.

Step 5: Using one jump ring, attach the bead made in step 4 to one of the eyelets. Repeat for the second side.

Step 6: Using one jump ring, attach one ear wire to the opposite eyelet from the bead. Repeat for the second side.


http://tinyurl.com/tci-leather

Heart’s Desire Bracelet Materials: Swarovski crystals

Product Group Article No. Amount Size Color Color Code Beads 5328 120 pcs 4mm Crystal 001 BeCharmed Heart 81951 3 pcs 14mm Lt Siam 227 Pave Pendant Heart 67412 1 pc 20mm Lt Siam/Siam 208/227

Supplies: 30” beading wire 6 2mm crimp bead 6 3mm crimp bead cover 1 small 3-hole D-ring clasp set TierraCast 94-6185-61 2 8mm jump rings Instructions Step 1: Cut the beading wire into three equal pieces ~10 inches each.

Step 2: Using one piece of beading wire, crimp one end to one half of the 3-hole D-ring clasp and attach one crimp cover. String on 40 article 5328 4mm Crystal bicones. Slip on one BeCharmed Heart. Crimp the other end to the second half of the 3-hole D-ring clasp and attach the crimp cover. Note: make sure each bead strand is crimped to the corresponding holes on the D-Ring clasp. Repeat this step two more times.

Step 3: Attach together one side of the D-ring clasp to the bar of the clasp using two jump rings.

Step 4: Attach the Pave Pendant Heart to the opposite D-ring clasp using one jump ring. Note: The pave heart pendant should not be attached to the bar side of the D-ring clasp because it will not close properly.


Flaming Hot Tennis Shoes Materials: Swarovski crystals

Product Group Article No. Amount Size Color Color Code Flatbacks 2205 14 pcs 10mm Fireopal 237 Flatbacks 2205 36 pcs 14mm Fireopal 237

Supplies: 1 pair Converse Red Tennis Shoes Gem-tac Glue Instructions Step 1: Create a pattern using both sizes of the Flame Flat back on the toe of the shoe. Using a drop

of glue adhere each stone in your pattern. Let dry for 24 hours.


Inspiration Piece - Filled Square Necklace Designed by Sabine Lippert, Swarovski Ambassador Executed by Susan Kazarian This incredible pendant, designed by Sabine Lippert Swarovski Ambassador, captures the beauty of Swarovski’s Crystal Pearls. The strap is strung with the same seed beads, Swarovski Crystal pearls and Swarovski Crystal beads that are woven in the pendant. Materials: Swarovski crystals

Product Group Article No. Amount Size Color Color Code Pearls 5810 8 pcs 8mm Crystal Pearlescent White 001 969 Pearls 5810 8 pcs 6mm Crystal Pearlescent White 001 969 Pearls 5810 16 pcs 3mm Crystal Pearlescent White 001 969 Beads 5328 20 pcs 4mm Yellow Opal Ab 2x 231 AB2 Beads 5000 24 pcs 2mm Crystal AB 001 AB Round Stone 1122 1 pc 18mm Crystal AB 001 AB

Supplies: 15/0 seed beads 11/0 seed beads 8/0 seed beads Beading needles 6# Fireline


Quarterly CREATE YOUR STYLE reports

Documents

Transcript of Quarterly CREATE YOUR STYLE reports