GUIDANCE NOTESfor Estimate Request

• Hob: Make | Model• Installation method: Standard | Rebate• Type: Gas | Electric

Appliances

Profiles*

• Tap holes• Drainer grooves: Quantity

Straight | Angled | Recessed• Pop up sockets• Air switch• Hot rods

Additional cut outs

• Splashback• Upstands - Coved or Square• Sills• Risers• Worktop end panels/Downstands• Waterstop

Additional items

• Type: Granite | Marble | Strata Quartz | Branded Quartz CORIAN Solid surfaceHI-MACS Solid surface | OtherTimber

• Please specify: Colour Material thicknessSurface finish

• Service Type: Supply to Drawing/TemplateTemplate & installation

Material

Finish

(Silestone, Caeserstone, etc)

Standard square edge R8mm Owl’s beak

R15mm Owl’s beak

Waterfall edge

Single pencil round

Arrow Slow bevel

3mm pencil round

Shark’s nose R15mm Bull Nose

Double R8mm

Curva

• Overhang: Full under polish | Half Underpolish• Underwrap/cladding** Solid surface only

Plan

Please provide:

• A sketch including all dimensions for all work pieces,upstands, splashbacks, sills, worktop downstands /end panels / risers etc.

• Confirmation if you are using handless doors

• Details regarding access

• Detail where cabinetry will be, particularly withbreakfast bars & islands, as we need to understandwhat support is being provided.

Please note:• All depths are measured at 620mm unless you request otherwise• Any work pieces over 2500mm may require joints, this will be confirmed at the point of template.

Please refer to the Directory, 3 Worksurfaces for tolerances.

*Please refer to the Directory, 3 Worksurfaces for options / tolerances | ** Please ask for clarification

PLEASE NOTE: IMAGE TO BE PROVIDED

• Sink: Make | Model• Type: Inset | Undermount | Belfast

Flush | Overhang

(Solid Surface only)

(Solid Surface only)

WS_0043_Request for Estimate_Layout 1 16/07/2015 15:12 Page 1