Putties That Will Not Run or Sag
1
Epox-EEZ Easy to Use Dispenser Kits Durabond 7025 Rebuilds a Machine Part 0 For Use to 1000 F RK 454 Repairs Cast Iron Housing for Use 0 to 500 F Durabond 7032 Seals an Exhaust System 0 For Use to 2000 F These smooth, creamy putties offer the performance of Cotronics’ high temperature, specialty formulations in easy to use, repair kits. No need for fixturing or clamps. These putties are easily applied with out running, dripping or sagging. Just trowel on and cure at room temp. to repair, rebuild or assemble components. These convenient Repair kits are ideal for small jobs, field use, in-house repairs and even production applications. Ideal for on site repairs. Epox-EEZ Durabond 7025 500ºF Machinable Metallic Putties 1000ºF New Aluminum Putty Ideal for patching leaky pipes, valves and fittings; repairing pumps, machinery and equipment; and rebuilding worn shafts, housings and linings. These smooth, creamy putties cure at room temperature to form highly machinable, Aluminum or Stainless based composites that are usable to 500°F. Users Report: RK454 repairs, fills and patches parts prior to powder coating. The finished parts are free from blemishes caused by imperfections. These putties are commonly used in appliances, automotive, electronic, instrumentation, motors, chemical equipment, etc. They are a must for every shop and laboratory. Choose RK454 general purpose, repair epoxy for its machinability and thermal conductivity. Choose RK456 for the corrosion resistance of type 316 stainless steel. Packed in easy to use dispenser kits and in bulk quantities. RK454 (Aluminum) Applicator kit, 1 pound kit RK456 (Stainless) Applicator kit, 1 pound kit Durabond 7025 Corrosion Resistant Putty is specially formulated with active aluminum metal to provide excellent resistance to corrosion, erosion, most chemicals and solvents. This moist, creamy paste is easily troweled on to form a smooth surface that is ideal for any high temp. repair, rebuilding, production, manufacturing, industrial, automotive or equipment application. Durabond 7025 cures in 24 hours at room temp. or in 2 hours at 250ºF to form a highly machinable, aluminum based composite usable to 1000°F. Applications Include: Rebuilding worn or eroded areas, repairing cracks and voids; sealing and protecting process equipment, rebuilding worn pumps, impellers, valves, motors, heat exchanges, etc. One pound kit, Two pound kit Putties That Will Not Run or Sag 0 0 500 F - 2000 F Durabond 7032 2000ºF New Stainless Putty Now, a 2000ºF Stainless Steel putty that will repair high temp. equipment. This smooth, creamy paste is easy to use. Just re-mix and apply. Will not run, drip or sag while applying and hardening starts in just 60 minutes. User Friendly, does not contain flammable solvents. No harsh odors or out-gassing. 7032 has excellent adhesion and is resistant to most chemicals, solvents and high heat. Can be machined, tapped or drilled. Ideal for high temperature repairs, rebuilding, filling holes, plugging leaks in automotive, maintenance and industrial applications. Most commonly used for production, automotive parts and repairs, machines assemblies, instrumentation, laboratory equipment, etc. Durabond 7032 is the ideal choice for any high temperature application requiring high bond strength and up to 2000ºF. 1 lb. Container, 2 lb. Container Production Quantities on Request *@1000ºF 9 COTRONICS CORP. (718) 788-5533 Fax (718) 788-5538 www.cotronics.com RESCOR RK454 RK456 7025 7032 Base Al S.S. Al S.S. Compressive Strength (psi) 10,000 12,000 4,800 5,400 Bond Strength (psi @ R.T.) 2,100 1,850 1,400* 1200* -6 Thermal Exp. (10 /ºF) .22 .22 10 10 2 Thermal Cond. (BTU in/hr F Ft ) 35 12 30 10 Components 2 2 2 1 Mix Ratio 100/11 100/6 100/55 N/A Viscosity Paste Paste Paste Paste Density (gm/cc) 1.9 2.8 2.2 3.5 Working Time (min.) 20 20 N/A N/A Cure @ R. T. 16 16 16 16 Service TempºF 500 500 1200 2000
Transcript of Putties That Will Not Run or Sag
Epox-EEZEasy to Use
Dispenser Kits
Durabond 7025Rebuilds a Machine Part
0For Use to 1000 F
RK 454Repairs Cast Iron
Housing for Use 0to 500 F
Durabond 7032Seals an Exhaust System
0For Use to 2000 F
These smooth, creamy putties offer the performance of Cotronics’ high temperature, specialty formulations in easy to use, repair kits. No need for fixturing or clamps. These putties are easily applied with out running, dripping or sagging. Just trowel on and cure at room temp. to repair, rebuild or assemble components. These convenient Repair kits are ideal for small jobs, field use, in-house repairs and even production applications. Ideal for on site repairs.
Epox-EEZ
Durabond 7025
500ºF Machinable Metallic Putties
1000ºF New Aluminum Putty
Ideal for patching leaky pipes, valves and fittings; repairing pumps, machinery and equipment; and rebuilding worn shafts, housings and linings. These smooth, creamy putties cure at room temperature to form highly machinable, Aluminum or Stainless based composites that are usable to 500°F.
Users Report: RK454 repairs, fills and patches parts prior to powder coating. The finished parts are free from blemishes caused by imperfections. These putties are commonly used in appliances, automotive, electronic, instrumentation, motors, chemical equipment, etc. They are a must for every shop and laboratory.
Choose RK454 general purpose, repair epoxy for its machinability and thermal conductivity.
Choose RK456 for the corrosion resistance of type 316 stainless steel. Packed in easy to use dispenser kits and in bulk quantities.
RK454 (Aluminum) Applicator kit, 1 pound kit
RK456 (Stainless) Applicator kit, 1 pound kit
Durabond 7025 Corrosion Resistant Putty is specially formulated with active aluminum metal to provide excellent resistance to corrosion, erosion, most chemicals and solvents. This moist, creamy paste is easily troweled on to form a smooth surface that is ideal for any high temp. repair, rebuilding, production, manufacturing, industrial, automotive or equipment application. Durabond 7025 cures in 24 hours at room temp. or in 2 hours at 250ºF to form a highly machinable, aluminum based composite usable to 1000°F.
Applications Include: Rebuilding worn or eroded areas, repairing cracks and voids; sealing and protecting process equipment, rebuilding worn pumps, impellers, valves, motors, heat exchanges, etc. One pound kit, Two pound kit
Putties That Will Not Run or Sag0 0
500 F - 2000 F
Durabond 7032 2000ºF New Stainless PuttyNow, a 2000ºF Stainless Steel putty that will repair high temp. equipment. This smooth, creamy paste is easy to use. Just re-mix and apply. Will not run, drip or sag while applying and hardening starts in just 60 minutes. User Friendly, does not contain flammable solvents. No harsh odors or out-gassing. 7032 has excellent adhesion and is resistant to most chemicals, solvents and high heat. Can be machined, tapped or drilled. Ideal for high temperature repairs, rebuilding, filling holes, plugging leaks in automotive, maintenance and industrial applications. Most commonly used for production, automotive parts and repairs, machines assemblies, instrumentation, laboratory equipment, etc.
Durabond 7032 is the ideal choice for any high temperature application requiring high bond strength and up to 2000ºF.
1 lb. Container, 2 lb. Container
Production Quantities on Request *@1000ºF
9COTRONICS CORP.(718) 788-5533 Fax (718) 788-5538 www.cotronics.com
RESCOR RK454 RK456 7025 7032
Base Al S.S. Al S.S.
Compressive Strength (psi) 10,000 12,000 4,800 5,400
Bond Strength (psi @ R.T.) 2,100 1,850 1,400* 1200*-6Thermal Exp. (10 /ºF) .22 .22 10 10
2Thermal Cond. (BTU in/hr F Ft ) 35 12 30 10
Components 2 2 2 1
Mix Ratio 100/11 100/6 100/55 N/A
Viscosity Paste Paste Paste Paste
Density (gm/cc) 1.9 2.8 2.2 3.5
Working Time (min.) 20 20 N/A N/A
Cure @ R. T. 16 16 16 16
Service TempºF 500 500 1200 2000
