PSMN4R8-100BSE - NexperiaPSMN4R8-100BSE N-channel 100 V 4.8 mΩ standard level MOSFET in D2PAK 12...
Transcript of PSMN4R8-100BSE - NexperiaPSMN4R8-100BSE N-channel 100 V 4.8 mΩ standard level MOSFET in D2PAK 12...
PSMN4R8-100BSEN-channel 100 V 4.8 mΩ standard level MOSFET in D2PAK12 April 2013 Product data sheet
1. General descriptionStandard level N-channel MOSFET in a D2PAK package qualified to 175 °C. Part of Nexperia's "NextPower Live" portfolio, the PSMN4R8-100BSE complements the latest "hot-swap" controllers - robust enough to withstand substantial inrush currents during turn on, whilst offering a low RDS(on) characteristic to keep temperatures down and efficiency up in continued use. Ideal for telecommunication systems based on a 48 V backplane / supply rail.
2. Features and benefits• Enhanced forward biased safe operating area for superior linear mode operation• Very low RDS(on) for low conduction losses
3. Applications• Electronic fuse• Hot swap• Load switch• Soft start
4. Quick reference dataTable 1. Quick reference dataSymbol Parameter Conditions Min Typ Max Unit
VDS drain-source voltage Tj ≥ 25 °C; Tj ≤ 175 °C - - 100 V
IDM peak drain current pulsed; Tmb = 25 °C; tp ≤ 10 µs; Fig. 4 - - 707 A
Ptot total power dissipation Tmb = 25 °C; Fig. 2 - - 405 W
Static characteristics
RDSon drain-source on-stateresistance
VGS = 10 V; ID = 25 A; Tj = 25 °C;Fig. 12
- 4.1 4.8 mΩ
Dynamic characteristics
QGD gate-drain charge - 59 83 nC
QG(tot) total gate charge
VGS = 10 V; ID = 25 A; VDS = 50 V;Fig. 14; Fig. 15 - 196 278 nC
© Nexperia B.V. 2017. All rights reserved
Nexperia PSMN4R8-100BSEN-channel 100 V 4.8 mΩ standard level MOSFET in D2PAK
PSMN4R8-100BSE All information provided in this document is subject to legal disclaimers.
Product data sheet 12 April 2013 2 / 13
Symbol Parameter Conditions Min Typ Max Unit
Avalanche Ruggedness
EDS(AL)S non-repetitive drain-source avalancheenergy
VGS = 10 V; Tj(init) = 25 °C; ID = 120 A;Vsup ≤ 100 V; RGS = 50 Ω; unclamped;Fig. 3
- - 542 mJ
5. Pinning informationTable 2. Pinning informationPin Symbol Description Simplified outline Graphic symbol
1 G gate
2 D drain[1]
3 S source
mb D mounting base; connected todrain
mb
1 3
2
D2PAK (SOT404)
S
D
G
mbb076
[1] It is not possible to make connection to pin 2
6. Ordering informationTable 3. Ordering information
PackageType number
Name Description Version
PSMN4R8-100BSE D2PAK plastic single-ended surface-mounted package (D2PAK); 3 leads(one lead cropped)
SOT404
7. MarkingTable 4. Marking codesType number Marking code
PSMN4R8-100BSE PSMN4R8-100BSE
8. Limiting valuesTable 5. Limiting valuesIn accordance with the Absolute Maximum Rating System (IEC 60134).Symbol Parameter Conditions Min Max Unit
VDS drain-source voltage Tj ≥ 25 °C; Tj ≤ 175 °C - 100 V
VDGR drain-gate voltage Tj ≥ 25 °C; Tj ≤ 175 °C; RGS = 20 kΩ - 100 V
VGS gate-source voltage -20 20 V
© Nexperia B.V. 2017. All rights reserved
Nexperia PSMN4R8-100BSEN-channel 100 V 4.8 mΩ standard level MOSFET in D2PAK
PSMN4R8-100BSE All information provided in this document is subject to legal disclaimers.
Product data sheet 12 April 2013 3 / 13
Symbol Parameter Conditions Min Max Unit
VGS = 10 V; Tj = 25 °C; Fig. 1 [1] - 120 AID drain current
VGS = 10 V; Tmb = 100 °C; Fig. 1 [1] - 120 A
IDM peak drain current pulsed; tp ≤ 10 µs; Tmb = 25 °C; Fig. 4 - 707 A
Ptot total power dissipation Tmb = 25 °C; Fig. 2 - 405 W
Tstg storage temperature -55 175 °C
Tj junction temperature -55 175 °C
Tsld(M) peak soldering temperature - 260 °C
Source-drain diode
IS source current Tmb = 25 °C [1] - 120 A
ISM peak source current pulsed; tp ≤ 10 µs; Tmb = 25 °C - 707 A
Avalanche Ruggedness
EDS(AL)S non-repetitive drain-sourceavalanche energy
VGS = 10 V; Tj(init) = 25 °C; ID = 120 A;Vsup ≤ 100 V; RGS = 50 Ω; unclamped;Fig. 3
- 542 mJ
[1] Continuous current limited by package.
003aaj964
0
40
80
120
160
200
0 50 100 150 200Tmb(°C)
ID(A)
(1)
(1) Capped at 120A due to package
Fig. 1. Continuous drain current as a function ofmounting base temperature
Tmb (°C)0 20015050 100
03aa16
40
80
120
Pder(%)
0
Fig. 2. Normalized total power dissipation as afunction of mounting base temperature
© Nexperia B.V. 2017. All rights reserved
Nexperia PSMN4R8-100BSEN-channel 100 V 4.8 mΩ standard level MOSFET in D2PAK
PSMN4R8-100BSE All information provided in this document is subject to legal disclaimers.
Product data sheet 12 April 2013 4 / 13
003aaj965
10-3 10-2 10-1 1 101
10
102
103
tAL (ms)
IALIAL(A)(A)
(1)(1)
(2)(2)
Fig. 3. Single pulse avalanche rating; avalanche current as a function of avalanche time
003aaj966
10-1
1
10
102
103
104
10-1 1 10 102 103
VDS(V)
ID(A)
Limit RDSon= VDS/ ID
DC
100 µs
10 ms
tp =10 µs
100 ms
1 ms
Fig. 4. Safe operating area; continuous and peak drain currents as a function of drain-source voltage
9. Thermal characteristicsTable 6. Thermal characteristicsSymbol Parameter Conditions Min Typ Max Unit
Rth(j-mb) thermal resistancefrom junction tomounting base
Fig. 5 - 0.3 0.37 K/W
Rth(j-a) thermal resistancefrom junction toambient
Minimum footprint; mounted on aprinted circuit board
- 50 - K/W
© Nexperia B.V. 2017. All rights reserved
Nexperia PSMN4R8-100BSEN-channel 100 V 4.8 mΩ standard level MOSFET in D2PAK
PSMN4R8-100BSE All information provided in this document is subject to legal disclaimers.
Product data sheet 12 April 2013 5 / 13
003aaj353
single shot
0.2
0.1
0.05
10-3
10-2
10-1
1
10-6 10-5 10-4 10-3 10-2 10-1 1tp (s)
Zth(j-mb)(K/W)
δ = 0.5
0.02
tpT
P
t
tpT
δ =
Fig. 5. Transient thermal impedance from junction to mounting base as a function of pulse duration
10. CharacteristicsTable 7. CharacteristicsSymbol Parameter Conditions Min Typ Max Unit
Static characteristics
ID = 250 µA; VGS = 0 V; Tj = 25 °C 100 - - VV(BR)DSS drain-sourcebreakdown voltage ID = 250 µA; VGS = 0 V; Tj = -55 °C 90 - - V
VGS(th) gate-source thresholdvoltage
ID = 1 mA; VDS = VGS; Tj = 25 °C;Fig. 10; Fig. 11
2 3 4 V
ID = 1 mA; VDS = VGS; Tj = 175 °C;Fig. 11
1 - - VVGSth gate-source thresholdvoltage
ID = 1 mA; VDS = VGS; Tj = -55 °C;Fig. 11
- - 4.6 V
VDS = 100 V; VGS = 0 V; Tj = 25 °C - 0.16 10 µAIDSS drain leakage current
VDS = 100 V; VGS = 0 V; Tj = 175 °C - - 500 µA
VGS = -20 V; VDS = 0 V; Tj = 25 °C - 10 100 nAIGSS gate leakage current
VGS = 20 V; VDS = 0 V; Tj = 25 °C - 10 100 nA
VGS = 10 V; ID = 25 A; Tj = 25 °C;Fig. 12
- 4.1 4.8 mΩ
VGS = 10 V; ID = 25 A; Tj = 100 °C;Fig. 13; Fig. 12
- - 8.7 mΩ
RDSon drain-source on-stateresistance
VGS = 10 V; ID = 25 A; Tj = 175 °C;Fig. 12; Fig. 13
- - 13 mΩ
RG gate resistance f = 1 MHz 0.43 0.85 1.7 Ω
© Nexperia B.V. 2017. All rights reserved
Nexperia PSMN4R8-100BSEN-channel 100 V 4.8 mΩ standard level MOSFET in D2PAK
PSMN4R8-100BSE All information provided in this document is subject to legal disclaimers.
Product data sheet 12 April 2013 6 / 13
Symbol Parameter Conditions Min Typ Max Unit
Dynamic characteristics
ID = 25 A; VDS = 50 V; VGS = 10 V;Fig. 14; Fig. 15
- 196 278 nCQG(tot) total gate charge
ID = 0 A; VDS = 0 V; VGS = 10 V - 166.9 234 nC
QGS gate-source charge - 40 56 nC
QGD gate-drain charge
ID = 25 A; VDS = 50 V; VGS = 10 V;Fig. 14; Fig. 15 - 59 83 nC
VGS(pl) gate-source plateauvoltage
ID = 25 A; VDS = 50 V; Fig. 14; Fig. 15 - 4.3 - V
Ciss input capacitance - 10665 14400 pF
Coss output capacitance - 674 910 pF
Crss reverse transfercapacitance
VDS = 50 V; VGS = 0 V; f = 1 MHz;Tj = 25 °C; Fig. 16
- 459 643 pF
td(on) turn-on delay time - 41 61.5 ns
tr rise time - 65 97.5 ns
td(off) turn-off delay time - 127 190.5 ns
tf fall time
VDS = 50 V; RL = 2 Ω; VGS = 10 V;RG(ext) = 4.7 Ω
- 69 103.5 ns
Source-drain diode
VSD source-drain voltage IS = 25 A; VGS = 0 V; Tj = 25 °C; Fig. 17 - 0.79 1.2 V
trr reverse recovery time - 72 94 ns
Qr recovered charge
IS = 25 A; dIS/dt = -100 A/µs; VGS = 0 V;VDS = 50 V - 227 296 nC
003aaj968
0
40
80
120
0 1 2 3 4VDS(V)
ID(A)
VGS(V) = 4
4.5
5
610
5.5
Fig. 6. Output characteristics; drain current as afunction of drain-source voltage; typical values
003aaj969
0
5
10
15
20
0 4 8 12 16VGS(V)
RDSon(mΩ)
Fig. 7. Drain-source on-state resistance as a functionof gate-source voltage; typical values
© Nexperia B.V. 2017. All rights reserved
Nexperia PSMN4R8-100BSEN-channel 100 V 4.8 mΩ standard level MOSFET in D2PAK
PSMN4R8-100BSE All information provided in this document is subject to legal disclaimers.
Product data sheet 12 April 2013 7 / 13
003aaj970
0
40
80
120
160
200
0 60 120 180 240 300ID (A)
gfs(S)
Fig. 8. Forward transconductance as a function ofdrain current; typical values
003aaj971
0
60
120
180
240
300
0 2 4 6 8VGS(V)
ID(A)
Tj = 25 °CTj = 150 °C
Fig. 9. Transfer characteristics; drain current as afunction of gate-source voltage; typical values
03aa35
VGS (V)0 642
10- 4
10- 5
10- 2
10- 3
10- 1
ID(A)
10- 6
min typ max
Fig. 10. Sub-threshold drain current as a function ofgate-source voltage
Tj (°C)- 60 1801200 60
003aad280
2
3
1
4
5VGS(th)
(V)
0
max
typ
min
Fig. 11. Gate-source threshold voltage as a function ofjunction temperature
© Nexperia B.V. 2017. All rights reserved
Nexperia PSMN4R8-100BSEN-channel 100 V 4.8 mΩ standard level MOSFET in D2PAK
PSMN4R8-100BSE All information provided in this document is subject to legal disclaimers.
Product data sheet 12 April 2013 8 / 13
003aaj974
0
10
20
30
0 40 80 120ID(A)
RDSon(mΩ)
VGS(V) = 10
5 5.5
6
4.5
Fig. 12. Drain-source on-state resistance as a functionof drain current; typical values
003aad774
0
0.8
1.6
2.4
3.2
-60 0 60 120 180Tj (°C)
a
Fig. 13. Normalized drain-source on-state resistancefactor as a function of junction temperature
003aaa508
VGS
VGS(th)
QGS1 QGS2
QGD
VDS
QG(tot)
ID
QGS
VGS(pl)
Fig. 14. Gate charge waveform definitions
003aaj976
0
2
4
6
8
10
0 50 100 150 200 250QG (nC)
VGS(V)
VDS= 50V
80 V
20 V
Fig. 15. Gate-source voltage as a function of gatecharge; typical values
© Nexperia B.V. 2017. All rights reserved
Nexperia PSMN4R8-100BSEN-channel 100 V 4.8 mΩ standard level MOSFET in D2PAK
PSMN4R8-100BSE All information provided in this document is subject to legal disclaimers.
Product data sheet 12 April 2013 9 / 13
003aaj977
102
103
104
105
10-1 1 10 102VDS(V)
C(pF)
Ciss
Crss
Coss
Fig. 16. Input, output and reverse transfer capacitancesas a function of drain-source voltage; typicalvalues
003aaj978
0
40
80
120
0 0.3 0.6 0.9 1.2VSD(V)
IS(A)
Tj = 25 °C
Tj = 175°C
Fig. 17. Source current as a function of source-drainvoltage; typical values
© Nexperia B.V. 2017. All rights reserved
Nexperia PSMN4R8-100BSEN-channel 100 V 4.8 mΩ standard level MOSFET in D2PAK
PSMN4R8-100BSE All information provided in this document is subject to legal disclaimers.
Product data sheet 12 April 2013 10 / 13
11. Package outline
ReferencesOutlineversion
Europeanprojection Issue date
IEC JEDEC JEITA
SOT404
sot404_po
06-03-1613-02-25
Unit
mmmaxnommin
4.5
4.1
1.40
1.27
1.45
1.05
0.64
0.46
11 1.6
1.2
A
Dimensions (mm are the original dimensions)
Plastic single-ended surface-mounted package (D2PAK); 3 leads (one lead cropped) SOT404
A1 b
0.85
0.60
b2 c D D1 E e HD Lp Q
2.5415.8
14.8
2.6
2.2
10.3
9.7
2.9
2.1
0 5 mm
scale
e e
E
b
D1
HD
D
b2
Q
Lp
c
A1
A
1 3
2
mountingbase
Fig. 18. Package outline D2PAK (SOT404)
© Nexperia B.V. 2017. All rights reserved
Nexperia PSMN4R8-100BSEN-channel 100 V 4.8 mΩ standard level MOSFET in D2PAK
PSMN4R8-100BSE All information provided in this document is subject to legal disclaimers.
Product data sheet 12 April 2013 11 / 13
12. Legal information
12.1 Data sheet statusDocumentstatus [1][2]
Productstatus [3]
Definition
Objective[short] datasheet
Development This document contains data fromthe objective specification for productdevelopment.
Preliminary[short] datasheet
Qualification This document contains data from thepreliminary specification.
Product[short] datasheet
Production This document contains the productspecification.
[1] Please consult the most recently issued document before initiating orcompleting a design.
[2] The term 'short data sheet' is explained in section "Definitions".[3] The product status of device(s) described in this document may have
changed since this document was published and may differ in case ofmultiple devices. The latest product status information is available onthe Internet at URL http://www.nexperia.com.
12.2 DefinitionsPreview — The document is a preview version only. The document is stillsubject to formal approval, which may result in modifications or additions.Nexperia does not give any representations or warranties as tothe accuracy or completeness of information included herein and shall haveno liability for the consequences of use of such information.
Draft — The document is a draft version only. The content is still underinternal review and subject to formal approval, which may result inmodifications or additions. Nexperia does not give anyrepresentations or warranties as to the accuracy or completeness ofinformation included herein and shall have no liability for the consequencesof use of such information.
Short data sheet — A short data sheet is an extract from a full data sheetwith the same product type number(s) and title. A short data sheet isintended for quick reference only and should not be relied upon to containdetailed and full information. For detailed and full information see therelevant full data sheet, which is available on request via the local Nexperiasales office. In case of any inconsistency or conflict with theshort data sheet, the full data sheet shall prevail.
Product specification — The information and data provided in a Productdata sheet shall define the specification of the product as agreed betweenNexperia and its customer, unless Nexperia andcustomer have explicitly agreed otherwise in writing. In no event however,shall an agreement be valid in which the Nexperia productis deemed to offer functions and qualities beyond those described in theProduct data sheet.
12.3 DisclaimersLimited warranty and liability — Information in this document is believedto be accurate and reliable. However, Nexperia does not giveany representations or warranties, expressed or implied, as to the accuracyor completeness of such information and shall have no liability for theconsequences of use of such information. Nexperia takes noresponsibility for the content in this document if provided by an informationsource outside of Nexperia.
In no event shall Nexperia be liable for any indirect, incidental,punitive, special or consequential damages (including - without limitation -lost profits, lost savings, business interruption, costs related to the removalor replacement of any products or rework charges) whether or not suchdamages are based on tort (including negligence), warranty, breach ofcontract or any other legal theory.
Notwithstanding any damages that customer might incur for any reasonwhatsoever, Nexperia’s aggregate and cumulative liability towardscustomer for the products described herein shall be limited in accordancewith the Terms and conditions of commercial sale of Nexperia.
Right to make changes — Nexperia reserves the right tomake changes to information published in this document, including withoutlimitation specifications and product descriptions, at any time and withoutnotice. This document supersedes and replaces all information supplied priorto the publication hereof.
Suitability for use — Nexperia products are not designed,authorized or warranted to be suitable for use in life support, life-critical orsafety-critical systems or equipment, nor in applications where failure ormalfunction of a Nexperia product can reasonably be expectedto result in personal injury, death or severe property or environmentaldamage. Nexperia and its suppliers accept no liability forinclusion and/or use of Nexperia products in such equipment orapplications and therefore such inclusion and/or use is at the customer’s ownrisk.
Quick reference data — The Quick reference data is an extract of theproduct data given in the Limiting values and Characteristics sections of thisdocument, and as such is not complete, exhaustive or legally binding.
Applications — Applications that are described herein for any of theseproducts are for illustrative purposes only. Nexperia makes norepresentation or warranty that such applications will be suitable for thespecified use without further testing or modification.
Customers are responsible for the design and operation of theirapplications and products using Nexperia products, and Nexperiaaccepts no liability for any assistance with applications orcustomer product design. It is customer’s sole responsibility to determinewhether the Nexperia product is suitable and fit for thecustomer’s applications and products planned, as well as for the plannedapplication and use of customer’s third party customer(s). Customers shouldprovide appropriate design and operating safeguards to minimize the risksassociated with their applications and products.
Nexperia does not accept any liability related to any default,damage, costs or problem which is based on any weakness or defaultin the customer’s applications or products, or the application or use bycustomer’s third party customer(s). Customer is responsible for doing allnecessary testing for the customer’s applications and products using Nexperiaproducts in order to avoid a default of the applicationsand the products or of the application or use by customer’s third partycustomer(s). Nexperia does not accept any liability in this respect.
Limiting values — Stress above one or more limiting values (as defined inthe Absolute Maximum Ratings System of IEC 60134) will cause permanentdamage to the device. Limiting values are stress ratings only and (proper)operation of the device at these or any other conditions above thosegiven in the Recommended operating conditions section (if present) or theCharacteristics sections of this document is not warranted. Constant orrepeated exposure to limiting values will permanently and irreversibly affectthe quality and reliability of the device.
Terms and conditions of commercial sale — Nexperiaproducts are sold subject to the general terms and conditions of commercial sale, as published at http://www.nexperia.com/profile/terms, unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. Nexperia hereby expressly objects toapplying the customer’s general terms and conditions with regard to the purchase of Nexperia products by customer.
No offer to sell or license — Nothing in this document may be interpretedor construed as an offer to sell products that is open for acceptance or the
© Nexperia B.V. 2017. All rights reserved
Nexperia PSMN4R8-100BSEN-channel 100 V 4.8 mΩ standard level MOSFET in D2PAK
PSMN4R8-100BSE All information provided in this document is subject to legal disclaimers.
Product data sheet 12 April 2013 12 / 13
grant, conveyance or implication of any license under any copyrights, patentsor other industrial or intellectual property rights.
Export control — This document as well as the item(s) described hereinmay be subject to export control regulations. Export might require a priorauthorization from competent authorities.
Non-automotive qualified products — Unless this data sheet expresslystates that this specific Nexperia product is automotive qualified,the product is not suitable for automotive use. It is neither qualified nortested in accordance with automotive testing or application requirements.Nexperia accepts no liability for inclusion and/or use of non-automotive qualified products in automotive equipment or applications.
In the event that customer uses the product for design-in and use inautomotive applications to automotive specifications and standards,customer (a) shall use the product without Nexperia’s warrantyof the product for such automotive applications, use and specifications, and(b) whenever customer uses the product for automotive applications beyondNexperia’s specifications such use shall be solely at customer’sown risk, and (c) customer fully indemnifies Nexperia for anyliability, damages or failed product claims resulting from customer design anduse of the product for automotive applications beyond Nexperia’sstandard warranty and Nexperia’s product specifications.
Translations — A non-English (translated) version of a document is forreference only. The English version shall prevail in case of any discrepancybetween the translated and English versions.
12.4 TrademarksNotice: All referenced brands, product names, service names andtrademarks are the property of their respective owners.
© Nexperia B.V. 2017. All rights reserved
Nexperia PSMN4R8-100BSEN-channel 100 V 4.8 mΩ standard level MOSFET in D2PAK
PSMN4R8-100BSE All information provided in this document is subject to legal disclaimers.
Product data sheet 12 April 2013 13 / 13
13. Contents1 General description ............................................... 12 Features and benefits ............................................13 Applications ........................................................... 14 Quick reference data ............................................. 15 Pinning information ...............................................26 Ordering information .............................................27 Marking ................................................................... 28 Limiting values .......................................................29 Thermal characteristics .........................................410 Characteristics .......................................................511 Package outline ................................................... 1012 Legal information .................................................1112.1 Data sheet status ............................................... 1112.2 Definitions ...........................................................1112.3 Disclaimers .........................................................1112.4 Trademarks ........................................................ 12
© Nexperia B.V. 2017. All rights reservedFor more information, please visit: http://www.nexperia.comFor sales office addresses, please send an email to: [email protected] Date of release: 12 April 2013