Properties, Problems and Solutions of Cylinder Liners
11
Cylinder Liners from India - By Liner Sleeves India www.linersleeves.c om
description
Generally, Cylinder Liners are made of alloyed cast iron and are poised in the cylinder outline with a low arranged flange. The highest point of the cylinder liner is embedded with a cooling jacket. These cylinder liners from India have scavenge ports, bored gaps for lubrication and are ready for installation of temperature sensors, if needed.
Transcript of Properties, Problems and Solutions of Cylinder Liners
Cylinder Liners from India
- By Liner Sleeves India
www.linersleeves.com
Properties, Problems and Solutions of Cylinder Liners
Cylinder Liners are made of alloyed cast iron by Indian manufacturers and are poised in the cylinder outline with a low arranged flange. The highest point of the cylinder liner is embedded with a cooling jacket. These cylinder liners from India have scavenge ports, bored gaps for lubrication and are ready for installation of temperature sensors, if needed.
Properties, Problems and Solutions of Cylinder Liners
Aluminum cylinder liners are exceptionally prominent, as they lead high temperature well and the comparable coefficient of growth between the liner and piston implies the frosty clearances could be closer to perfect than with a steel cylinder liner. Contrasted with steels however, the admissible loads are low, so the material’s thickness expands in order to keep stress inside suitable limits. That implies the material and the water jacket encompassing it are larger, and alternate clear suggestion is that, for a provided drill size, the drill centre are further separated than would be the situation for steel.
Properties
The essential properties of cylinder liners offered by India based manufacturers:
Less oil consumption Less wear on the liner Less wear on the associate piston ring High anti-galling properties Exchange maximum temperature to the coolant Inner surface ought to be such that with piston rings
it develops gas tight surface
Problems
Common problems in Cylinder liners:
O ring damage Internal surface get scratched Cracking in cylinder liners Lack of proper lubrication system increases internal
diameter Poor quality cooling water degrades outer surface of
cylinder liners
Solutions
Solutions by leading manufacturers of Cylinder liners India:
Only use quality o rings constructed from premium materials
Ensure lubrication is done properly Check piston rings Use good quality cooling agent in water Only utilize high grade cylinder liners Keep the temperature(internal and
outward) in balance to avoid thermal cracking
Images of Cylinder Liners
Images of Cylinder Liners
Contact Us
Address: Plot No. 415, GIDC,Odhav, Ahmedabad - 382415. Gujarat – India. Phone: +91-79-22874461 Fax : +91-79-22877361 Mobile : +91-99043-04061 / +91-98240-19161 Email: [email protected] Website: www.linersleeves.com
Socially Contacts
Blogs and Articles
