prongTech brochure Final - lucentwater.com · Lorem ipsumLorem ipsum Lorem ipsum HYPER I HYPER II...

5
www.prongtech.com Transformerless design Light Weight Corrosion-Proof Powder Coated Aluminum Frame Lower cost than 13% industrial bleach at $1.42 per gal in bulk. No water softeners needed. Eliminates maintenance associated with bulk chemical dosing. Round plate design allows for cell life of 10-12 years. Small footprint compared to bulk tanks/pumps. Superior efficiency over competition Tubular plate design allows for extended cell life of 10-12 years Automated flow control and remote monitoring options available Customizable cell capacity toward your exact needs. Optimized cell design for improved efficiency Scalable from 1-16 cells Ability to isolate single cell module for troubleshooting while continuing to run the system. On-Site System: 1-16+ kg/Hr ULTRA LONG-LIFE HYPOCHLORITE GENERATORS HYPER-SERIES OVERVIEW

Transcript of prongTech brochure Final - lucentwater.com · Lorem ipsumLorem ipsum Lorem ipsum HYPER I HYPER II...

Page 1: prongTech brochure Final - lucentwater.com · Lorem ipsumLorem ipsum Lorem ipsum HYPER I HYPER II HYPER III Mark IV Rated FAC Capacity 1kg/hr 2kg/hr 2kg/hr 4kg/hr Cell 21, 1000A 2,

www.prongtech.comwww.prongtech.com

Transformerless design

Light Weight Corrosion-ProofPowder Coated Aluminum Frame

Lower cost than 13% industrialbleach at $1.42 per gal in bulk.

No water softeners needed.

Eliminates maintenance associatedwith bulk chemical dosing.

Round plate design allows for cell life of10-12 years.

Small footprint compared to bulktanks/pumps.

Superior e�ciency over competition

Tubular plate design allows for extendedcell life of 10-12 years

Automated �ow control and remotemonitoring options available

Customizable cell capacity toward yourexact needs.

Optimized cell design for improved e�ciency

Scalable from 1-16 cells

Ability to isolate single cell module fortroubleshooting while continuing torun the system.

On-Site System:

1-16+ kg/Hr

ULTRA LONG-LIFE HYPOCHLORITE GENERATORS

HYPER-SERIES OVERVIEW

Page 2: prongTech brochure Final - lucentwater.com · Lorem ipsumLorem ipsum Lorem ipsum HYPER I HYPER II HYPER III Mark IV Rated FAC Capacity 1kg/hr 2kg/hr 2kg/hr 4kg/hr Cell 21, 1000A 2,

www.prongtech.comwww.prongtech.com

Our patented tubular-plate monopolar, multi-pass cells outperform

flat-plate designsby requiring less electricity to achieve greater production

of hypochlorite with much longer cell life compared to the competition.

TECHNICAL DESIGN: TUBULAR PLATE

Page 3: prongTech brochure Final - lucentwater.com · Lorem ipsumLorem ipsum Lorem ipsum HYPER I HYPER II HYPER III Mark IV Rated FAC Capacity 1kg/hr 2kg/hr 2kg/hr 4kg/hr Cell 21, 1000A 2,

www.prongtech.comwww.prongtech.com

Modular System Available

from 1 to 8 Cell Banks

AUTOMATED FLOW CONTROL& REMOTE MONITORING OPTIONS AVAILABLE

from 1 to 8 Cell Banks

Page 4: prongTech brochure Final - lucentwater.com · Lorem ipsumLorem ipsum Lorem ipsum HYPER I HYPER II HYPER III Mark IV Rated FAC Capacity 1kg/hr 2kg/hr 2kg/hr 4kg/hr Cell 21, 1000A 2,

Lorem ipsumLorem ipsum

Lorem ipsum

HYPER I HYPER II HYPER III Mark IV

Rated FAC Capacity 1kg/hr 2kg/hr 2kg/hr 4kg/hr Cell 1, 1000A 2, 1000A 1, 2000A 2, 2000A

Treatment 1000 m3/h (4403 GPM) at 1.0 mg/L 2000 m3/h (8806 GPM) at 1.0 mg/L 2000 m3/h (8806 GPM) at 1.0 mg/L 4000 m3/h (17611 GPM) at 1.0 mg/L

Typical 2.28 to 5.0 m3/h (10 to 22 GPM) Typical 2.28 to 5.0 m3/h (10 to 22 GPM) Typical 2.28 to 5.0 m3/h (10 to 22 GPM) Typical 2.28 to 5.0 m3/h (10 to 22 GPM)

2.5 m3/h (11.0 GPM) @ 400mg/L 2.5 m3/h (11.0 GPM) @ 800 mg/L 2.5 m3/h (11.0 GPM) @ 800 mg/L 2.5 m3/h (11.0 GPM) @ 1600 mg/L

5.0 m3/h (22.0 GPM) @ 200mg/L 5.0 m3/h (22.0 GPM) @ 400 mg/L 5.0 m3/h (22.0 GPM) @ 400 mg/L 5.0 m3/h (22.0 GPM) @ 800 mg/L

1" ANSI Flange 1” ANSI Flange 1” ANSI Flange 1” ANSI FlangeDrain 1" NPT 1” NPT 1” NPT 1” NPT

Power Consump�on 5.4 KW DC at max capacity 10.8 KW DC at max capacity 10 KW DC at max capacity

460V ±5% 50/60 Hz | 12.5A | 3 phase (site voltage to be verified by owner)

460V ±5% 50/60 Hz | 25A | 3 phase (site voltage to be verified by owner)

460V ±5% 50/60 Hz | 25A | 3 phase (site voltage to be verified by owner)

115V ±5% 60 Hz | 15A | 1 phase (site voltage to be verified by owner)

115V ±5% 60 Hz | 15A | 1 phase (site voltage to be verified by owner)

115V ±5% 60 Hz | 15A | 1 phase (site voltage to be verified by owner)

Footprint: 1041 mm wide x 813 mm deep Footprint: 1041 mm wide x 813 mm deep Footprint: 1270 mm wide x 851 mm deep 1270 mm wide x 851 mm deep

Envelope: 1041 mm wide x 813 mm deep x 1505 mm tall

Envelope: 1041 mm wide x 813 mm deep x 1505 mm tall

Envelope: 1270mm wide x 876 mm deep x 1676 mm tall

1270mm wide x 876 mm deep x

One EC1K-W Cell: 1 kg/hr, 1000A cell Two EC1K-W Cell: 1 kg/hr, 1000A cell One EC2KL-W Cell: 2 kg/hr, 2000A cell Op�mized for efficient opera�on from 20°C to 50°C

Op�mized for efficient opera�on from 20°C to 50°C

Op�mized for efficient opera�on from 20°C to 50°C

0.5m3/hr (2.2 GPM) @ 2000 mg/L 1.0m3/hr (4.4 GPM) @ 2000 mg/L 1.0m3/hr (4.4 GPM) @ 2000 mg/L 2.0m3/hr (8.8 GPM) @ 2000 mg/L

Coa�ng

One EC1K: Cold water MMO coa�ng on the electroly�c cell Op�mized for chlorina�on conversion efficiency from 0 to 50°C

Two EC1K: Cold water MMO coa�ng on the electroly�c cell Op�mized for chlorina�on conversion efficiency from 0 to 50°C

One EC2K: Cold water MMO coa�ng on the electroly�c cell Op�mized for chlorina�on conversion efficiency from 0 to 50°C

Internally wired 480V, 3-phase to 115V 1-phase transformer

Internally wired 480V, 3-phase to 115V 1-phase transformer

Internally wired 480V, 3-phase to 115V 1-phase transformer

Removes need for separate 115V 1-phase power

Removes need for separate 115V 1-phase power

Removes need for separate 115V 1-phase power

* Output rated at salinity (3.5%) and water temperature (65°F, 18.3°C)

* Output rated at salinity (3.5%) and water temperature (65°F, 18.3°C)

* Output rated at salinity (3.5%) and water temperature (65°F, 18.3°C)

* Output rated at salinity (3.5%) and water temperature (65°F, 18.3

Cell Details

Cell Flow Rate

Power Peak Opera�on

Dimensions

Rec�fier,water cooled SMPS

18VDC / 1000A18VDC / 1000A

Customizable Options

18VDC / 2000A 18VDC / 2000A

115V Transformer

www.prongtech.com

HYPER I HYPER II HYPER III

Rated FAC Capacity 1kg/hr 2kg/hr 2kg/hrCell 1, 1000A 2, 1000A 1, 2000A

Treatment 1000 m3/h (4403 GPM) at 1.0 mg/L 2000 m3/h (8806 GPM) at 1.0 mg/L 2000 m3/h (8806 GPM) at 1.0 mg/L

Typical 2.28 to 5.0 m3/h (10 to 22 GPM) Typical 2.28 to 5.0 m3/h (10 to 22 GPM) Typical 2.28 to 5.0 m3/h (10 to 22 GPM)

2.5 m3/h (11.0 GPM) @ 400mg/L 2.5 m3/h (11.0 GPM) @ 800 mg/L 2.5 m3/h (11.0 GPM) @ 800 mg/L

5.0 m3/h (22.0 GPM) @ 200mg/L 5.0 m3/h (22.0 GPM) @ 400 mg/L 5.0 m3/h (22.0 GPM) @ 400 mg/L

1" ANSI Flange 1” ANSI Flange 1” ANSI FlangeDrain 1" NPT 1” NPT 1” NPT

Power Consump�on 5.4 KW DC at max capacity 10.8 KW DC at max capacity 10 KW DC at max capacity

460V ±5% 50/0/0 60 Hz | 12.5A | 3 phase (sitevoltage to be verified by owner)

460V ±5% 50/0/0 60 Hz | 25A | 3 phase (sitevoltage to be verified by owner)

460V ±5% 50/0/0 60 Hz | 25A | 3 phase (sitevoltage to be verified by owner)

115V ±5% 60 Hz | 15A | 1 phase (site voltageto be verified by owner)

115V ±5% 60 Hz | 15A | 1 phase (sitevoltage to be verified by owner)

115V ±5% 60 Hz | 15A | 1 phase (sitevoltage to be verified by owner)

Footprint: 1041 mm wide x 813 mm deep Footprint: 1041 mm wide x 813 mm deep Footprint: 1270 mm wide x 851 mm deep

Envelope: 1041 mm wide x 813 mm deep x1505 mm tall

Envelope: 1041 mm wide x 813 mm deep x1505 mm tall

Envelope: 1270mm wide x 876 mm deep x1676 mm tall

One EC1K-W Cell: 1 kg/hr, 1000A cell TwTwT o EC1K-W Cell: 1 kg/hr, 1000A cell One EC2KL-W Cell: 2 kg/hr, 2000A cellOp�mized for efficient opera�on from 20°Cto 50°C

Op�mized for efficient opera�on from20°C to 50°C

Op�mized for efficient opera�on from20°C to 50°C

0.5m3/hr (2.2 GPM) @ 2000 mg/L 1.0m3/hr (4.4 GPM) @ 2000 mg/L 1.0m3/hr (4.4 GPM) @ 2000 mg/L

Coa�ng

One EC1K: Cold water MMO coa�ng on theelectroly�c cell Op�mized for chlorina�onconversion efficiency from 0 to 50°C

TwTwT o EC1K: Cold water MMO coa�ng on theelectroly�c cell Op�mized for chlorina�onconversion efficiency from 0 to 50°C

One EC2K: Cold water MMO coa�ng on theelectroly�c cell Op�mized for chlorina�onconversion efficiency from 0 to 50°C

Internally wired 480V, 3-phase to 115V 1-phase transformer

Internally wired 480V, 3-phase to 115V 1-phase transformer

Internally wired 480V, 3-phase to 115V 1-phase transformer

Removes need for separate 115V 1-phasepower

Removes need for separate 115V 1-phasepower

Removes need for separate 115V 1-phasepower

* Outptpt ut rated at salinitytyt (3.5%) and watertemperature (65°F,F,F 18.3°C)C)C

* Outptpt ut rated at salinitytyt (3.5%) and watertemperature (65°F,F,F 18.3°C)C)C

* Outptpt ut rated at salinitytyt (3.5%) and watertemperature (65°F,F,F 18.3°C)C)C

Cell Details

Cell Flow Rate

Power Peak Opera�on

Dimensions

Rec�fier,water cooled SMPS

18VDC / 1000A18VDC / 1000A 18VDC / 2000A

115V Transformer

www.prongtech.com

SYSTEM SPECIFICATIONS

Page 5: prongTech brochure Final - lucentwater.com · Lorem ipsumLorem ipsum Lorem ipsum HYPER I HYPER II HYPER III Mark IV Rated FAC Capacity 1kg/hr 2kg/hr 2kg/hr 4kg/hr Cell 21, 1000A 2,

www.prongtech.comwww.prongtech.com

Pronghorn Technologies, LLC1379 N. Cedar Street Suite #104 Laramie, Wyoming 82072 USA

https://prongtech.com/[email protected] /307-206-2330 /

* Output rated at salinity (3.5%) and water temperature (65°F, 18.3

Mark III HYPER IV HYPER V HYPER VI HYPER VI+ Custom

Systems4kg/hr 8kg/hr 16kg/hr 16kg/hr - 128kg/hr2, 2000A 2, 4000A 4, 4000A

3/h (8806 GPM) at 1.0 mg/L 4000 m3/h (17611 GPM) at 1.0 mg/L8,000 m3/h (35,224 GPM) at 1.0 mg/L

16,000 m3/h (70446 GPM) at 1.0 mg/L

Typical 2.28 to 5.0 m3/h (10 to 22 GPM) Typical 2.28 to 5.0 m3/h (10 to 22 GPM)Typical 4.0 to 10.0 m3/h (18 to 44 GPM)

Typical 8.0 to 10.0 m3/h (35 to 44 GPM)

3/h (11.0 GPM) @ 800 mg/L 2.5 m3/h (11.0 GPM) @ 1600 mg/L4 m3/h (18 GPM) @ 2000 mg/L

8 m3/h (35 GPM) @ 2000 mg/L

3/h (22.0 GPM) @ 400 mg/L 5.0 m3/h (22.0 GPM) @ 800 mg/L10 m3/h (44 GPM) @ 800 mg/L

10 m3/h (88 GPM) @ 1600 mg/L

1” ANSI Flange 1-1/2" ANSI Flange 1-1/2” ANSI Flange1” NPT 1" NPT 1” NPT

10 KW DC at max capacity 20 KW DC at max capacity 43.2 KW DC at max capacity 18 KW DC at max capacity

460V ±5% 50/60 Hz | 25A | 3 phase (site voltage to be verified by owner)

460V ±5% 50/60 Hz | 55A | 3 phase (site voltage to be verified by owner)

460V ±5% 50/60 Hz | 110A | 3 phase (site voltage to be verified by owner)

460V ±5% 50/60 Hz | 225A | 3 phase (site voltage to be verified by owner)

115V ±5% 60 Hz | 15A | 1 phase (site voltage to be verified by owner)

115V ±5% 60 Hz | 15A | 1 phase (site voltage to be verified by owner)

115V ±5% 60 Hz | 20A | 1 phase (site voltage to be verified by owner)

115V ±5% 60 Hz | 20A | 1 phase (site voltage to be verified by owner)

1270 mm wide x 851 mm deep Footprint: 1270 mm wide x 851 mm deep TBD TBD

1270mm wide x 876 mm deep x Envelope: 1270mm wide x 876 mm deep x 1676 mm tall

TBD TBD

One EC2KL-W Cell: 2 kg/hr, 2000A cell Two EC2KL-W Cell: 2 kg/hr, 2000A cell Op�mized for efficient opera�on from Op�mized for efficient opera�on from

20°C to 50°C1.0m3/hr (4.4 GPM) @ 2000 mg/L 2.0m3/hr (8.8 GPM) @ 2000 mg/L

Cold water MMO coa�ng on the electroly�c cell Op�mized for chlorina�on conversion efficiency from 0 to 50°C

Two EC2K: Cold water MMO coa�ng on the electroly�c cell Op�mized for chlorina�on conversion efficiency from 0 to 50°C

$5,000Internally wired 480V, 3-phase to 115V 1-

phase transformerInternally wired 480V, 3-phase to 115V 1-

phase transformer Removes need for separate 115V 1-phase

powerRemoves need for separate 115V 1-phase

power$1,000

* Output rated at salinity (3.5%) and water temperature (65°F, 18.3°C) ° C)

18VDC / 4000A 36VDC / 4000A18VDC / 2000A 18VDC / 2000A

SYSTEM SPECIFICATIONS