projek overview - McCrums · 2017. 10. 31. · work chairs NPRTJ Projek – Synchro-Tilt Task Chair...
Transcript of projek overview - McCrums · 2017. 10. 31. · work chairs NPRTJ Projek – Synchro-Tilt Task Chair...
work chairs
seating price & user guide – January 27, 2014
• Projek chairs have been designed and tested for users weighing up to 300 lbs• Projek chairs are equipped with casters intended for use on carpeted surfaces. Use of these casters on hard surfaces couldresult in unexpected rolling and tipping. Casters designed for use on hard surfaces are available. If in doubt, see your dealerfor appropriate selection
• Synchro-tilt weight-balancing with 3.5:1 ratio
Projek is a chair for all people and environments.
Optional fixed headrest
Shrinx Mesh
Lumbar Apex Adjustment of 4"
Weight Balancing Synchro-Tilt Motion
2"3/8" (60mm hard castersare standard)
Tension Control
Optional 3D Pivoting Arm Capspivot 180˚ (with auto safety lock)
Seat Depth Adjustment of 3"
Tilt Limiter / Back Lock Optional Arm Width Adjustment
Seat Height Adjustment of 4"
Optional Arm HeightAdjustment or Fixed Arm
Plastic or Aluminum Five Star Base
Statement of Line
projek overview
Swivel Stool – No Arms
Swivel Stool – 2D Arms
Swivel Stool – 3D Arms
Swivel Stool – With Headrest
Guest Chair –Cantilever
High Back – No Arms
High Back – Fixed T-Arms
High Back – 2D Arms
High Back – 3D Arms
With Headrest
work chairs
seating price & user guide – January 27, 2014
work chairs
Task Chair and Stool:• The headrest's frame and fabric finishes default to the Outer Frame Finish and Seat Fabric Finish (Assembled Task Chair andStool only)
• Arm finish defaults to Outer Frame Finish. For Stone Arm Finish, major finish is Stone, Arm Rest Pad and Arm Supportin Ebony
Guest Chair:• Lumbar Element not included• Arm Rest in Ebony only
Plastic Outer Frame
Plastic Inner Frame
Plastic Lumbar Element
Shrinx Mesh Back
Arm Rest
Arm Rest Pad
projek finish guide
When selecting finishes for the Inner and Outer Frame, Lumbar and Mesh of the Projek family of chairs, Task chairand Swivel Stool, it is possible to select different finishes for the components listed below or to have the same finishspecified throughout.
Arm Support
Arm Rest
work chairs
projek dimensions & material requirements
seating price & user guide – January 27, 2014
Arm Height from Seat
Fixed T-Arms - 7 3-4"
2D 7 5/8" - 11 1/2"
3D 7 1/2" - 10 1/4"
Width Between Arms Fixed T-Arms - 19 3-4"2D 18" - 20 5/8"3D 17 3/8" - 20 1/4"
Seat Height from Floor
Task Standard 16" - 20"
Task High 17 3/4" - 22 7/8"
Task Low 15" - 17 5/8"
Swivel Stool 20" - 30"
Back Height from Seat
22 - 5/8"
Headrest
7-1/4"
Seat Depth 16 1/4"- 19 1/4"
Back Width 18"
Lumber Apex Height5 3/4" - 9 1/2"
Seat Width 20 1/4"
Angle between Seat and BackTask 96.3˚-116.2˚Swivel Stool 96.3˚
Dimensions
For Conversion to Metric, multiply dimension by 25.4.
COM/COL Material Requirement
More yardage may be required depending upon the pattern repeat and the matching required. Leather yield may be affectedby the quality of the COL. However, variance in the size of the hides will not affect the yield.
Overall Height
Task 38 5/8" - 42 5/8"
Swivel Stool 44 5/8" - 52 5/8"
Overall Width 29 1/4"
Overall Depth 29 1/4"
DUAL UPHOLSTERED COM COL [yards] [sq. ft]
Seat 7/8 8 3/4Headrest 1/2 4 7/8
WEIGHT
General Use/Executive Task 35 lbsSwivel Stool 41.8 lbs
work chairs
seating price & user guide – January 27, 2014
projek dimensions & material requirements (continued)Arm Height from Seat
7 1/2"
Width Between Arms 19 3/4"
Seat Height from Floor
18"
Back Height from Seat
17 1/2"
Seat Depth 19"
Back Width 18 3/4"
Seat Width 19 1/4"
Angle between Seat and Back108˚
Dimensions
For Conversion to Metric, multiply dimension by 25.4.
COM/COL Material Requirement
More yardage may be required depending upon the pattern repeat and the matching required. Leather yield may be affectedby the quality of the COL. However, variance in the size of the hides will not affect the yield.
Overall Height
35 1/2"
Overall Width 23 3/4"
Overall Depth 22 1/2"
DUAL UPHOLSTERED COM COL [yards] [sq. ft]
Guest Seat 7/8 8 3/4
WEIGHT
Cantilever Guest 18.4 lbs
work chairs
seating price & user guide – January 27, 2014
projek adjustment features & instruction
ARM HEIGHT ADJUSTMENT BACK TILT ADJUSTMENT TILT TENSION ADJUSTMENT
LUMBAR HEIGHT-ADJUSTMENT ARM WIDTH ADJUSTMENT
The lumbar height-adjustment knobs can be foundon the back where the Inner Frame connects to theLumbar Element.The height of the lumbar support can be adjusted bysliding them up and down.
To adjust the width of each arm, turn the dialclockwise to release the arm lock. Slide the arminward or outward to the desired position. Tightenthe knob to lock the arm in place.
To raise or lower the stool’s foot ring, turn the footring’s knob counter clockwise to release the foot ringand adjust the ring until you reach the desired level.Turn the knob clockwise to lock in place.
To adjust the arm height, press the button beloweither arm rest to raise or lower it to the desiredposition. Release the button to lock in place.
Turning the grip found under the left side of the seatlimits the back tilt travel and locks the back. Travel islimited on 3 positions with back lock in the uprightposition.
Fine tune the weight balanced tension by rotating thedial located below the seat centre to suit personalpreference.
Seat height can be adjusted by pulling outward on thebutton below the seat on the right hand side. Whenthis lever is pulled, the weight of the body will causethe seat to lower, and releasing it stops the seat at thedesired height. Pulling outward on the button withno weight on the seat allows it to rise.
To adjust the seat depth, pull outward on the buttonbelow the seat on the left-hand side andsimultaneously lift your weight from the seat whilesliding the seat forward or backward. Release buttonto lock the seat in place.
To pivot the arm cap, depress the auto safety lockbutton on the outside of the armrest and pivot 180˚degrees to desired position. Release the button to lockin place.
SEAT HEIGHT ADJUSTMENT SEAT DEPTH ADJUSTMENT 3D ARM PIVOT ADJUSTMENT
STOOL FOOT RING HEIGHT
work chairs
seating price & user guide – January 27, 2014
N P R T Projek – Synchro-Tilt
Task Chair
DESCRIPTION PRICE
COM/ COL/NO HEADREST (N) Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10
No Arms 719 738 757 776 795 814 834 852 870 936Fixed Arms 798 817 836 855 874 893 913 931 949 10152D Width, Height-Adjustable T-Arms 823 842 861 880 899 918 938 956 974 10403D Width, Height-Adjustable T-Arms w/ Pivot Arm Cap 873 892 911 930 949 968 988 1006 1024 1090
Leather Leather Leather LeatherNO HEADREST (N) (Continued) LA LB LC LD
No Arms 882 907 982 1007Fixed Arms 961 986 1061 10862D Width, Height-Adjustable T-Arms 986 1011 1086 11113D Width, Height-Adjustable T-Arms w/ Pivot Arm Cap 1036 1061 1136 1161
If Headrest (Y) is specified add 119
If Polished Aluminum (C9) Base is specified add 45
If Soft Casters (A) are specified add 17
If Hard Glides (B) are specified add 17
If Soft Glides (C) are specified add 28
If Fully Assembled (F) are specified add 0
FEATURES• Standard pneumatic cylinder provides height adjustment of 4"• Seat depth adjustment of 3"• Lumbar height adjustment of 4"• Back tilt can be locked in the upright position or left to free flow to 3 defined
angle ranges• Weight-balancing with a travel limiter synchro-tilt mechanism (3.5:1 tilt ratio) with
unique preference control to tilt tension. Back recline angle range is 0° - 20° andseat adjustment range angle is 0°- 6.5°
• Ebony base is available in plastic only• Hard casters are standard and are well suited for soft flooring such as carpeting• Soft casters are available for use on hard flooring, such as wood, concrete or tile• Headrest option is only available on Fully Assembled style
NOTESHeadrest's frame and fabric finishes default to Outer Frame Finish and Seat fabric finish.2D and 3D Arm finish to match Outer Frame Finish. For Stone Arm Finish, major Finishis Stone with Arm Rest Pad and Arm Post Support in Ebony. Fixed Arm is always Ebony.Projek chair is Dual Upholstery with Shrinx Mesh available on the back only andTeknion’s Standard and Graded-In-Fabrics on seat. See Projek Finish Guide to definePlastic Outer Frame, Plastic Inner Frame and Lumbar Element finish details. Not all configurations are available in the Xpress program.
Arm Style
N No Arms
F Fixed T-Arms
W 2D Width- & Height-Adjustable T-Arms
P 3D Width- & Height-Adjustable T-Arms withPivot Arm Cap
Plastic LumbarElement Finish
8A Stone
8B Ebony
Headrest
N No Headrest
Y WithHeadrest
Plastic OuterFrame Finish
8A Stone
8B Ebony
Plastic InnerFrame Finish
8A Stone
8B Ebony
ShrinxMeshBack
S1 Stone
S2 Ebony
SeatUpholsteryFinish
Fabric
Leather
CylinderStyle
1 Standard
2 High
3 Low
Base Finish
52 Ebony
C9 PolishedAluminum
Casters/Glides(Optional)
A Casters,Soft
B Glides,Hard
C Glides,Soft
AssemblyStyle
F FullyAssembled
N Not FullyAssembled
NPRT N N S2 L207 1 8B 52 A F
PRODUCT OPTIONS
SAMPLE ORDER CODE
8A 8B
2D Arm
3D Arm
Fixed T-Arm
Xpress
work chairs
N P R T JProjek – Synchro-TiltTask Chair (CAL-TB133)
FEATURES• Standard pneumatic cylinder provides height adjustment of 4"• Seat depth adjustment of 3"• Lumbar height adjustment of 4"• Back tilt can be locked in the upright position or left to free flow to 3 defined angle ranges• Weight-balancing with a travel limiter synchro-tilt mechanism (3.5:1 tilt ratio) with unique
preference control to tilt tension. Back recline angle range is 0° - 20° and seat adjustmentrange angle is 0°- 6.5°
• Available with Polished Aluminum Base• Hard casters are standard and are well suited for soft flooring such as carpeting• Soft casters are available for use on hard flooring, such as wood, concrete or tile• Headrest option is only available on Fully Assembled style
NOTESHeadrest's frame and fabric finishes default to Outer Frame Finish and Seat fabric finish.2D and 3D Arm finish to match Outer Frame Finish. For Stone Arm Finish, major Finish is Stonewith Arm Rest Pad and Arm Post Support in Ebony. Fixed Arm is always Ebony.Projek chair is Dual Upholstery with Shrinx Mesh available on the back only and Teknion’sStandard and Graded-In-Fabrics on seat. See Projek Finish Guide to define Plastic Outer Frame,Plastic Inner Frame and Lumbar Element finish details. Not all configurations are available in the Xpress program.
seating price & user guide – January 27, 2014
CAL-TB133 – flammability test procedure established by the State of California for seating furniture that is used in public occupancies.
2D Arm
3D Arm
Fixed T-Arm
DESCRIPTION PRICE
NO HEADREST (N) Grade 1 Grade 2 Grade 3
No Arms 883 902 9213D Width, Height-Adjustable T-Arms w/ Pivot Arm Cap 1037 1056 1075
If Headrest (Y) is specified add 119
If Soft Casters (A) are specified add 17
If Hard Glides (B) are specified add 17
If Soft Glides (C) are specified add 28
If Fully Assembled (F) are specified add 0
Arm Style
N No Arms
P 3D Width- & Height-Adjustable T-Arms withPivot Arm Cap
Plastic LumbarElement Finish
8A Stone
8B Ebony
Headrest
N No Headrest
Y WithHeadrest
Plastic OuterFrame Finish
8A Stone
8B Ebony
Plastic InnerFrame Finish
8A Stone
8B Ebony
ShrinxMeshBack
S1 Stone
S2 Ebony
SeatUpholsteryFinish
Fabric
Leather
CylinderStyle
1 Standard
2 High
3 Low
Base Finish
C9 PolishedAluminum
Casters/Glides(Optional)
A Casters,Soft
B Glides,Hard
C Glides,Soft
AssemblyStyle
F FullyAssembled
N Not FullyAssembled
NPRTJ N N S2 L207 1 8B 52 A F
PRODUCT OPTIONS
SAMPLE ORDER CODE
8A 8B
work chairs
N P R DProjek – Swivel Stool
FEATURES• Standard pneumatic cylinder provides height adjustment of 8"• Swivels 360˚• Includes Chrome footring• Seat depth adjustment of 3"• Lumbar height adjustment of 4"• Ebony base is available in plastic only• Hard casters are standard and are well suited for soft flooring such as carpeting• Soft casters are available for use on hard flooring, such as wood, concrete or tile
NOTESHeadrest's frame and fabric finishes default to Outer Frame Finish and Seat fabric finish.Arm finish to match Outer Frame Finish. For Stone Arm Finish, major Finish is Stone with ArmRest Pad and Arm Post Support in Ebony.Projek chair is Dual Upholstery with Shrinx Mesh available on the back only and Teknion’sStandard and Graded-In-Fabrics on seat.See Projek Finish Guide to define Plastic Outer Frame, Plastic Inner Frame & Lumbar Elementfinish details.
seating price & user guide – January 27, 2014
DESCRIPTION PRICE
COM/ COL/NO HEADREST (N) Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10
No Arms 769 788 807 826 845 864 884 902 920 9862D Width, Height-Adjustable T-Arms 873 892 911 930 949 968 988 1006 1024 10903D Width, Height-Adjustable T-Arms w/ Pivot Arm Cap 923 942 961 980 999 1018 1038 1056 1074 1140
Leather Leather Leather LeatherNO HEADREST (N) (Continued) LA LB LC LD
No Arms 986 1006 1032 10572D Width, Height-Adjustable T-Arms 1090 1110 1136 11613D Width, Height-Adjustable T-Arms w/ Pivot Arm Cap 1140 1160 1186 1211
If Headrest (Y) is specified add 119
If Polished Aluminum (C9) Base is specified add 45
If Soft Casters (A) are specified add 17
Arm Style
N No Arms
W 2D Width- &Height-AdjustableT-Arms
P 3D Width- &Height-AdjustableT-Arms with PivotArm Cap
Headrest
N No Headrest
Y WithHeadrest
Shrinx MeshBack
S1 Stone
S2 Ebony
Seat UpholsteryFinish
Fabric
Leather
Plastic OuterFrame Finish
8A Stone
8B Ebony
Plastic InnerFrame Finish
8A Stone
8B Ebony
Plastic LumbarElement Finish
8A Stone
8B Ebony
Base Finish
52 Ebony
C9 PolishedAluminum
Casters/Glides(Optional)
A Casters, Soft
NPRD N N S2 L207 8B 52 A8A 8B
PRODUCT OPTIONS
SAMPLE ORDER CODE
work chairs
N P R GProjek – Guest Chair
FEATURES• Stacks 4 chairs• Arms are finished in EbonyNOTESBack Inner Frame Finish is available in Ebony and StoneArmrest is available in Ebony plastic onlyProjek chair is dual upholstery with Shrinx Mesh available on the back only and TeknionStandard and Graded-in Fabrics on seat. See Projek Finish Guide to define Plastic Outer Frameand Plastic Inner Frame finish details.
seating price & user guide – January 27, 2014
DESCRIPTION PRICE
COM/ COL/ Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10
Cantilever 599 619 639 659 679 699 719 739 759 819
Leather Leather Leather Leather LA LB LC LD
Cantilever 764 789 864 889
If Chrome (C6) is specified add 77
PRODUCT OPTIONS
SAMPLE ORDER CODE
Base Style
C Cantilever
Shrinx Mesh Back
S1 Stone
S2 Ebony
Seat UpholsteryFinish
Fabric
Leather
Plastic Outer FrameFinish
8A Stone
8B Ebony
Plastic Inner FrameFinish
8A Stone
8B Ebony
Frame Finish
52 Ebony
C6 Chrome
NPRG C S1 M502 8A 8B C6