Products Presentation Major (1)

Welcome to your Welding & Cutting Solutions

Center

Providing quality welding & cutting equipment, g q y g g q p ,consumables and accessories to Philippine

industries.

10 South AA Street, Quezon City 1103 PhilippinesTel: (02) 3739651, 4168688, 4156097, 3733680, 3733681, 3741477

Fax: (02) 3734211 E-mail: [email protected]: www.centerindustrial.com

INTRODUCTION

CENTER INDUSTRIAL SUPPLY CORPORATION is a leading welding and cutting products distributor in the Philippines. Representing some of the world's largest manufacturers of welding & cutting equipment and consumables we focus our attention on what we doequipment and consumables, we focus our attention on what we do best - providing the best welding and cutting solutions to Philippine industries. Our product range includes simple Oxy-Fuel Welding, Cutting & Brazing Apparatus, Manual Metal Arc, MIG/MAG, TIG Welding, Plasma Arc Cutting, Submerged Arc Welding Equipment and Automated Welding and Mechanized Cutting Systems. Combined with g g yquality welding consumables and accessories, we offer a complete range of products for all your welding and cutting needs. We back up our products with efficient technical and service support. Where metals must be welded or cut, we seek to provide our customers with the most cost-effective quality solutions.

We take great pride in the following:

TECHNOLOGY & SOLUTIONSWe represent equipment and consumables manufacturer that are known worldwide for being technology leaders in the welding andknown worldwide for being technology leaders in the welding and cutting field. From simple yet reliable technology to state-of-the-art technology, our solutions aim to help you improve your quality and increase your productivity.

QUALITY & RELIABILITYWe carry brands known for quality and reliability that can withstand the rigors of the job and the meet the demanding standards of your customers.

SERVICE & SUPPORTW k th t d t i l d th t it ithWe know that a product is only as good as the support it comes with, that is why we put a high priority in providing the necessary training and after-sales service support.

GAS EQUIPMENT

PUROX GT-350 OutfitHeavy duty W-300 welding torch and CW-300 cutting attachment. 2-1/2” th R 72 l t d l i th1/2” gauges on the R-72 regulators and ease-on oxygen valves in the CW-300. Smooth, dependable performance over a considerable operating range. Excellent for general purpose welding and cutting.

R-72 Regulators CW-300 Cutting Attachment 4200 Series NozzlesW-300 Welding Torch

300V Cutting Torch CDL-75 Regulators H-501 Outfit

Cutting Attachment

463EL-21 Cutting Torch Regulators Torch Handle

Cutting Nozzles Flashback Arrestors Gas Savers

PORTABLE AUTOMATIC GAS CUTTING EQUIPMENT

ESAB CG1-30 Portable Gas Cutting Machine

ESAB CG2-11 Automatic Pipe Cutting Machine

Designed for semi-automatic linear and circular cutting of steel plates.Cutting Thickness: 8 to 100mmSpeed Range: 50 to 750 mm/min.Circle Cutting Range: 200 – 2000 mm dia.Bevel Cut: 0 to 45 degIncludes 1 pc 1.8m rail, circle cutting

Equipped with 2 groups of magnetic rollers to suck up the steel pipe and cut in a circular motion. Minimum diameter 108mm and above with wall thickness of 5 to 50mm.

p , gattachment and cutting tips

WELDFLAME CG-30i Portable Gas Cutting Machine. Available in single and 2-torch models. Designed for semi-automatic linear and bevel cutting of steel plates.Cutting Thickness: 5 to 100mmS d R 50 t 750 / i

WELDFLAME Portable Magnetic Template-Tracer Shape Cutting Machine. Designed for circular and profile cutting of steel plates.Cutting Thickness: 5 to 100mmSpeed Range: 0 to 750nn/min.Ci l C tti Di t 10 t 300Speed Range: 50 to 750 mm/min.

Includes 1 pc. 1.8m rail and cutting tipsCircle Cutting Diameter: 10 to 300mmMaximum Cutting Width: 1200mm

STICK/TIG WELDING EQUIPMENT

LCF 1200 & RC500 Multi-Operator Welding Sets

The LCF Multi Operator system isThe LCF Multi-Operator system is designed to supply several operators with welding power simultaneously from one single rectifier. Low investment cost per welder compared with the cost of individual rectifiers. Extremely robust and reliable and low

Cmaintenance cost. The LCF1200 is designed to supply up to 1800 amps DC to multiple welding points via the RC500’s modules. Each RC500 is rated 500A 60% duty cycle and has a output range of 5 to 593A.


ACCUTIG 300P AC/DC Pulse TIG/Stick Welding Machine, features:• Thyristor-controlled Square Wave AC/DC TIGThyristor controlled Square Wave AC/DC TIG• High performance, high quality TIG welding characteristics for Aluminum, Stainless Steel and Mild Steel and many other metals• 300 Amps 40% duty cycle in both AC & DC• Adjustable AC balance control for max cleaning or max penetration in aluminum weldingwelding• Gas pre-flow, initial current, upslope, pulse current, background current, downslope and crater fill controls• Includes standard TIG welding accessories• Input 220V 60hz single phase

TRIARC 306/L & 406/L Industrial DC Rectifier Welding Machine

• For DC MMA (Stick) welding; also suitable for

RAINBOW 150 Portable Inverter DC TIG/MMA Welder• Excellent welding performance for light fabrication and

•MMA (Stick) welding and lift-arc TIG welding• Suitable for TIG welding mild steels and stainless steels• Lightweight, compact design, shock-proof

touch-start TIG welding• Superior arc characteristics. Sturdy and reliable.• 306/L is rated 280 amps 35% duty cycle; 406/L is rated 420 amps 35% duty cycle• Input 220/440 volts 60hz 3phase

fabrication and maintenance works

g g , p g , pmain structure. Weighs only 4.2 kgs.

ARCTRONIC 426 HEAVY DUTY THYRISTOR-TYPE DC CONSTANT CURRENT WELDING MACHINE• Excellent performance for MMA (Stick) and Lift-Arc TIG welding• Suitable also for Air Carbon Arc Gougingg g• Adjustable Arc Force Control and adjustable Hot Start• Electrode Anti-Sticking function• Rated 400 Amps 35% duty cycle; Curent Range: 5 to 400 Amps• Input: 220/440V 60Hz 3phase


G-TEC 200i DC INVERTER TIG WELDING MACHINE• Excellent TIG welding performance for thin gauge stainless steels and mild steels• High frequency arc starting assures instantaneous and smooth arc starts• Very smooth and stable arc in both Stick

PLA-TIG 301D DIGITAL-CONTROLLED DC INVERTER TIG WELDING MACHINE• Digital-Controlled DC Inverter TIG Welding Machine• Capable of DC TIG, Pulse TIG, TIG Spot and Stick Welding Processes• Rated 300 Amps 60% duty cycle• Very smooth and stable arc in both Stick

and TIG welding modes• Lightweight and compact• Equipped with 3 settings for crater fill control: on, off, repeat• Rated 200 Amps 40% duty cycle• Output range: 4 to 200 Amps DC

Input 220V 60hz single phase

• Rated 300 Amps 60% duty cycle• Current Range: 4 to 300 Amps DC• 60 sets of programmable welding parameters can be stored and recalled for use• Stepless adjustment of starting arc current from a soft arc to a hard arc

Gas preflow initial current slope up time• Input 220V 60hz single phase• Complete with standard TIG accessories

• Gas preflow, initial current, slope-up time, pulse current, welding current, slope-down time, crater fill current and gas postflow are fully adjustable• On/off/repeat crater fill modes• Adjustable spot welding timer• Input voltage 220V 60Hz 3Phase

C• Can also be used with 220V 1Phase with output derated to 230 amps maximum.• Complete with standard TIG accessories


TIG Torches and Parts

• Air-cooled TIG torches, Model 17 & 26• Water-cooled TIG torches, Model 18• With or without gas valve

• Collet, collet body, ceramic cup• Back caps – long, short• Power cable adapters• With or without gas valve

• Mono cable or Two-piece cable• Flex neck torches available on request

p• Torch bodies• Power cables• Water and gas hose assemblies• Torch handles

Argon Gas Regulators

GENTEC Flowmeter Regulators• Designed for TIG & MIG applications• Provide accurate regulation of gas flow• Body machined from class “A” brass bar stock• 191AR has compact lightweight construction, 50 scfh flow capacity, 1-1/2” inlet gauge• 195AR is for heavier duty application with internal safety pressure relief deisng, y p g,sintered bronze inlet filter, flowmeter is backpressure compensated to ensure accurate readings when line restrictions are present, chrome plated housing cap and with 2” gauge for easy reading• Standard CGA580 inlet connection

CO2/MIG/MAG WELDING EQUIPMENT

ESAB Origo Mag C202 Compact MIG Welding Machine• Ideal MIG/MAG welding machine for light fabrication and maintenance jobs• Built-in wire feeder• Equipped with 12-step voltage switch and potentiometer for wire feed adjusting to enable

ESAB Origo Mag C252 1ph Compact MIG Welding Machine• Ideal MIG/MAG welding machine for light to mediumfabrication and maintenance jobs• Built-in wire feeder• Equipped with 12-step voltage switch and potentiometer for wire feed adjusting to enablepotentiometer for wire feed adjusting to enable

easy setting of wire parameters• Adjustable burnback timer and spot welding timer• Power smoothing device provides for excellent welding performance and smooth arc characteristics even when using CO2

Fan cooled and equipped with thermal

potentiometer for wire feed adjusting to enable easy setting of wire parameters• Adjustable burnback timer and spot welding timer•Fan-cooled and equipped with thermal overload protection• 200 Amps @ 60% duty cycle

Current range: 40 250 Amps• Fan-cooled and equipped with thermal overload protection• 200 Amps @ 20% duty cycle• Current range: 30 – 200 Amps• Feed wire diameters 0.6 – 1.0mm mild and stainless steels, 1.0mm aluminum• Input 230V single phase 50/60 hz

C f

• Current range: 40 – 250 Amps• Feed wire diameters 0.6 – 1.2mm mild and stainless steels, 1.0 – 1.2mm aluminum• Input 230V 1 phase 50/60 hz• Complete with integral wire feeder, gas cylinder rack with wheels and standard accessories

• Complete with integral wire feeder, gas cylinder rack with wheels and standard accessories


ESAB Origo Mig C252 3ph Compact MIG Welding Machine• Ideal MIG/MAG welding machine for light to medium fabrication and maintenance jobs• Built-in wire feeder• Equipped with 10-step voltage switch and potentiometer for wire feed adjusting to enable

ESAB Origo Mig 321 with Origo Feed 314 M12 MIG Welding Package• Ideal MIG/MAG welding machine for light to medium abrication and maintenance jobs• Built-in wire feeder• Equipped with 40-step voltage switch and potentiometer for wire feed adjusting to enablepotentiometer for wire feed adjusting to enable

easy setting of wire parameters• Adjustable burnback timer and spot welding timer•Fan-cooled and equipped with thermal overload protection• 250 Amps @ 35% duty cycle

Current range: 40 280 Amps

potentiometer for wire feed adjusting to enable easy setting of wire parameters• Adjustable burnback timer and spot welding timer•Fan-cooled and equipped with thermal overload protection• 320 Amps @ 30% duty cycle

Current range: 40 320 Amps• Current range: 40 – 280 Amps• Feed wire diameters 0.6 – 1.2mm mild and stainless steels, 1.0 – 1.2mm aluminum• Input 230/440V 3 phase 50/60 hz• Complete with integral wire feeder, gas cylinder rack with wheels and standard accessories

• Current range: 40 – 320 Amps• Feed wire diameters 0.6 – 1.2mm mild and stainless steels, 1.0 – 1.2mm aluminum• Input 230/440V 3 phase 50/60 hz• Complete with Origo Feed 314 M12 wire feeder, 10m connection kit, gas cylinder rack with wheels and standard accessories


MOBILEMASTER IV cvccMOBILEMASTER IV cvcc WIRE FEEDER• Arc voltage feeder capable of use with CC or CV units Automatic, no switch required• 4-roll drive unit• All units include secondary contactor• All units include secondary contactor• Built for harsh environments such as construction sites, pipe lines, shipyards, offshore, general fabrication, mobile welding rigs and more• Totally enclosed, impact-resistant case protects welding wire from dirt, metal grit, p g , g ,moisture and other contaminants - a unique “rain gutter” door design keeps water from dripping into the wire Compartment• Metal reinforced, flame retardant, moldedcomposite plastic case will stand extreme

SpecificationsWire Speed Range*:………… 1.3 - 17.8 m/min* actual speed range will depend on the arc voltageWire Diameter Capacity …………...0.8 - 2.0 mm

abuse like hot slag, grinding sparks, corrosive chemicals, knocks, bumps, drops and more• Operates with reverse polarity (wire DC +) or straight polarity (wire DC-)• Permanent magnet drive motor with PWM d i lid t t t l id

Wire Diameter Capacity …………...0.8 2.0 mmWeight ......................................................13 kg

drive, solid state control - provides powerful, dependable wire feeding and controlled wire acceleration for smooth arc starts and chatterfree operation• Electronic Dynamic Braking• Safety features include insulated case, low voltage torch trigger circuit andlow voltage torch trigger circuit and overload protection


MULTIPOWER 460

• For high performance MIG, Pulse MIG (option), Flux Cored Wire, Stick Electrode Welding TIG and Air Carbon Arc Gouging

• Energy and power efficient, the best in its class with a 92% efficiency figure. Saves energy and reduces power costs. Uses up to

Multi-process, three-phase power source for heavy duty Industrial DC welding applications

Welding, TIG and Air Carbon Arc Gouging• SuperSwitch Technology design, provides suerior inverter-like performance in the welding arc while providing SCR-like reliability• Variable Inductance for fine tuning of the arc characteristics in short arc MIG welding

energy and reduces power costs. Uses up to 50% less current than conventional SCR machines.• 100% Solid State, no mechanical contactor• Touch TIG Start capability• Synergic/Non-Synergic Pulse MIG welding capability. (Option on the standard MP 460, g

• Built-in Arc Force Control for superior stick electrode performance• Digital preset of voltage/amperage on all processes at the front panel• Sheet metal parts and hardware made of stainless steel, Top and side panel made of

standard on the MP 460 Pulse) • Rated 100% duty cycle at 450 Amps 38V DC• Rated 60% duty cycle at 500 Amps 39V DC• Welding Range: 10A/12V to 500A/40V• Max Open Circuit Voltage: 80V DC• Primary input voltage and current @100% d t l 230/460/575V 60H 3 h 66/33/26Kydex polymer for superior durability in

harsh environments.• Auto Fan feature standard in the unit for energy savings. Automatically turns the fan motor on and off when needed.

duty cycle: 230/460/575V 60Hz 3ph, 66/33/26 amps


XD350 / XD500 Synergic-Controlled CO2/MAG Welding Machines

Thyristor-Controlled Machine with Integrated Microprocessor offering g p gthe following outstanding features and advantages:

Synergic Control• One-knob synergic control provides appropriate voltage for the welding current pp p g g(wire feed speed) selected• Just select the wire type, wire size, gas type and let the synergic control take care of the rest• Even operators with little experience can achieve proper welding conditions without creating re-workcreating re work• Separate control mode for welding voltage and current is also provided as standard

Easy Operation• Easy to read and precise voltmeter and ammeter are standard

XD-350• Rated at 350 Amps 50% duty cycle• Output Range: 50 to 350 Amps• Output Voltage: 16.5 to 31.5 Volts• 8 preset programs for solid wire sizes 0.9mm to 1.2mm and for flux cored wires 1.2mm &

Assured Quality• Cutting edge “Penetration Control” keeps depth of penetration constant even when tip-to-work distance varies

Fine Arc Start

1.4mm• Input voltage 220V 50/60Hz (440V available upon request)• Input Power 14.5kW

XD-500• Microprocessor control assures instantaneous arc start even at low current virtually every time

Crater Fill Function• prevents crater cracking at the end of welds

• Rated at 500 Amps 60% duty cycle• Output Range: 50 to 500 Amps• Output Voltage: 16.5 to 39 Volts• 9 preset programs for solid wire sizes 1.2mm to 1.6mm and for flux cored wire sizes 1.2mm to 1.6mm

I t lt 220V 50/60H (440V il blOther Features• 100V (2A) power outlet for shielding gas regulator heater• Mice-proof casing

• Input voltage 220V 50/60Hz (440V available upon request)• Input Power 26.0kW


DM350 / DM500 Digital Inverter CO2/MAG Automatic Welding Machines

True Digital Inverter for High Quality, High Efficiency Welding

• Less Spatter Generation

• Excellent arc control even down to 30 amps for complicated joint welding and out-of-position welding

• Digital turbo start function and digital anti-stick provides for instantaneous and stable arc starts

• Penetration control feature maintains penetration depth evenmaintains penetration depth even when wire extension varies during welding

• Arc characteristic can be adjusted from a soft to a hard characteristic to suit varying needs

DM-350• Rated at 350 Amps 60% duty cycle• Output Range: 30 to 350 Amps• Output Voltage: 12 to 36 Volts• Input voltage 220V 50/60Hz • Input Power 15kWsuit varying needs

• DM-350 has 16 pre-programmed welding parameter sets (DM-500 has 14) including for mild steel solid, mild steel cored, stainless steel sold, stainless steel cored wires

DM-500• Rated at 500 Amps 60% duty cycle• Output Range: 30 to 500 Amps• Output Voltage: 12 to 45 Volts• Input voltage 220V 50/60Hz

I t P 25kW• New parameter sets can be programmed and stored in memory for easy recall

• Digital display of current and voltage hil ldi l ith th

• Input Power 25kW

while welding, along with th average current or voltage when welding is completed


DP400 / DP500 Digital Inverter Pulse MIG/MAG Automatic Welding Machines

Number ONE is OTC’s Line Up of “D” Series Welding Machines, g ,Offering Both High Quality DC Pulse MIG/MAG and CO2/MAG/MIG Welding.

• Optimum arc performance in both Pulse and Non-Pulse MIG/MAG onPulse and Non Pulse MIG/MAG on all materials including mild steel, stainless steel and aluminum

• Incredible arc stability at very low current ranges

• Incredible arc stability at very high welding speeds

• Welds galvanized steel plate with ease

DP-400• Rated at 400 Amps 60% duty cycle• Output Range: 30 to 400 Amps• Output Voltage: 12 to 38 Volts• Input voltage 400V+/-15% 50/60Hz • Input Power 21.5kW

• Low voltage feature generates very little spatter

• High quality and high speed welding of sheet metal with low

DP-500• Rated at 500 Amps 60% duty cycle• Output Range: 30 to 500 Amps• Output Voltage: 12 to 45 Volts• Input voltage 400V +/-15% 50/60Hz

I t P 22 2kWg

heat input, resulting in high quality welds with minimal melt-through

•Pulse MIG produces outstanding weld quality in aluminum welding. Weld at 25 amps using 1.2mm dia

• Input Power 22.2kW

Weld at 25 amps using 1.2mm dia wire for thin sheets of 0.8-1.0mm

• Optional software expands capability of the machine to weld hard-to-weld metals


ESAB MIG Welding Torches

Productivity and performance – where it matters most• 4 Self-Cooled Welding Torches

• 2 Water-Cooled Welding Torches


OTC BLUE TORCH IIHIGH PERFORMANCE MIG/MAG WELDING TORCHES

• Superior ergonomic handle for easy operation• Flexible co-axial power cable improves workability• Spring cable support for smooth wire feeding g• Durable brass connector• Quick change direct plugs to suit any brand of wire feeders

1. Nozzle2. Insulator

9. Handle10. Trigger

3. Contact Tip4. Tip Body5. Orifice6. Torch body7. Cap8. Flat Pin

gg11. Spring12. Micro Switch13. Cable Support14. Liner15. Power Cable


Classic MIG/MAG Welding Torches

TBI-150• 60% duty cycle




• Mix: 150A• CO2: 180A• Air-Cooled• 0.6 – 1.0mm





Mi 450A

Torch Consumable Parts• Contact Tips• Tip Holders• Gas Diffusors• Nozzles

• Mix: 450A• CO2: 500A• Water-Cooled• 1.0 – 1.6mm

• Torch Necks• Handles• Triggers• Liners• Power Cables


GENTEC CO2 & Argon Flowmeter Regulators

190CR CO Fl R l t 195CR & 195AR CO & A Fl t190CR CO2 Flowgauge Regulator• For light duty MIG applications• Provide accurate regulation of gas flow• 0 to 50 SCFH CO2• 2” flow gauge for easy reading

195CR & 195AR CO2 & Argon Flowmeter Regulator• For general duty MIG applications• Provide accurate regulation of gas flow• 0 to 60 SCFH CO2 & Argon• Impact-resistant polycarbonate flow tube and outer cover

194CR CO2Flowmeter Regulator w/ Heater• For heavy duty high CO2 flow applications• Built-in thermostatically-controlled electric heater keeps the CO2 warm, allowing for a continuous duty cycle without freezing

199CR Radiator Type CO2Flowmeter Regulator• For heavy duty high CO2 flow applications• Radiator type fins keep the regulator warm & effectively prevents the CO2 from freezing even at high flow ratesy g

• 0 to 60 SCFH CO2• 110VAC/190W Heater

g• 0 to 60 SCFH CO2

PLASMA ARC CUTTING EQUIPMENT

From compact portables to heavy duty systems, ESAB plasma machines offers cutting capabilities from 1/8” to 4” . ESAB’s unique technology allows operators to achieve exceptional cut quality and consistency that ensures peak performance in plasma cutting and gouging.

POWERCUT 875• Cuts up to 7/8” (22mm)

POWERCUT 1250• Cuts up to 1-1/4” (32mm)

S t 1 1/2” (38 )• Severs up to 1-1/4” (32mm)• 60A 60% duty cycle, 50A 100% duty cycle• 208/230VAC 60Hz Single & Three Phase

• Severs up to 1-1/2” (38mm)• Suitable for plasma gouging• 70A 100% duty cycle (3 phase input)• 230/460VAC 60Hz Single & Three Phase

POWERCUT 1500• Cuts up to 1-1/2” (38mm)

ESP-150• All-encompassed heavy duty water-cooled• Cuts up to 1-1/2 (38mm)

• Severs up to 1-3/4” (45mm)• A good choice for plasma gouging• 90A 60% duty cycle • 230/460VAC 60Hz Three Phase

• All-encompassed heavy duty water-cooled • Cuts up to 2” (50mm)• Excellent plasma gouging performance• 150A 90% duty cycle• 230/460VAC 60Hz Three Phase

PLASMA ARC CUTTING EQUIPMENT

IGBT INVERTER AIR PLASMA ARC CUTTING MACHINES• Highly reliable yet competitively-priced plasma cutting machines• Low cost consumables resulting in low cutting cost per inch• Uses only compressed air• Cuts mild steels, stainless steels and aluminum• High duty cycle rating

G-CUT 51P• Cuts up to ½” (12mm)• Severs up to 5/8” (16mm)• 50A 60% duty cycle• 220VAC 60Hz Single phase

G-CUT 66D• Cuts up to 3/4” (20mm)• Severs up to 1” (25mm)• 60A 60% duty cycle

220VAC 60H Si l h

G-CUT 88D• Cuts up to 1” (25mm)• Severs up to 1-1/2” (38mm)• 80A 60% duty cycle

220VAC 60H Si l &• 220VAC 60Hz Single phase • 220VAC 60Hz Single phase • 220VAC 60Hz Single & Three phase

ENGINE DRIVEN WELDERS

DENOH HW200• Powered by single-cylinder Kohler CS-10 gasoline enginegasoline engine• Welds using cellulosic electrodes in downhill position with stable arc and minimal spatter• Lighweight & compact size• Welding current range: 45 to 200 Amps DC• Rated 60% duty cycle @ 175 Amps• Open circuit voltage: 80V• Open circuit voltage: 80V• Applicable electrodes: 2.0 – 4.0mm• Recoil starting system

DENOH HW310• Powered by twin-cylinder Robin EH65 gasoline engine• Outstanding performance using cellulosic electrodes, low hydrogen electrodes and TIG welding• High quality and highly efficient brushlessHigh quality and highly efficient brushless induction type generator• Welding current range: 60 to 310 Amps DC• Rated 50% duty cycle @ 280 Amps• Open circuit voltage: 85V• Applicable electrodes: 2.0 – 5.0mm• Electric starting system

ENGINE DRIVEN WELDERS

DENOH HW320• Powered by 4-cycle, 3-cylinder Kubota D-905 diesel engine905 diesel engine• Welds cellulosic and low-hydrogen electrodes in all positions•Welding current range: 45 to 300 Amps DC• Rated 50% duty cycle @ 280 Amps• Open circuit voltage: 75V• Applicable electrodes: 2.0 – 6.0mm• Auxiliary power: 10KVA of 440V 3 phase &• Auxiliary power: 10KVA of 440V 3 phase & 3KVA of 220V single phase • Electric starting system

WELDING & CUTTING AUTOMATION

SUBMERGED ARC WELDING SYSTEMS

A2 MULTITRAC. Designed for high quality and high productivity submerged arcquality and high productivity submerged arc welding applications. Self-propelled four-wheel drive tractor for stable and accurate operation. Robust yet compact & simple design makes it easy to operate and move around. Complete mechanical versatility when adjusting the nozzle into numerous positions for butt and fillet welding Strong reliable wirefor butt and fillet welding. Strong, reliable wire feed motor ensures an even and stable wire feed and can take single or optionally, twin wire. PEH Controller for precise and accurate control of welding parameters. Use the optional twin wire kit to increase pproductivity further by at least 30-40%!

Column & Boom/Turning Rolls. A Column and Boom for cost-efficent weldA Column and Boom for cost-efficent weld mechanization. The CaB 300S is designed to handle the automated demands in the industrial environment. The column is eccentric, which means that the welding head is always lined up in the centre of the carriage. This to be able to weld round objects with turning rolls on the same rail The CaB 300S can reach over high and longrail. The CaB 300S can reach over high and long distances, both vertically and horizontally. The ±180° column rotation facility provides a total action radius. The A2 or A6 welding systems with Process Controller PEH are easily combined with CaB 300S to control longitudinal or circumferential welding. A built-in swivel bracket

fat the end of the boom can position the welding head either for welding speed from the boom or from the mobile concrete carriage.


AUTOMATIC WELDING POSITIONERS/ TURN TABLE

Model PO 220A S Model PO 350A SModel PO-220A-S• Vertical Weight Capacity: 150 kgs• Horizontal Weight Capacity: 200 kgs• Speed Range: 1 – 16 rpm• Table Tilt: 0 to 90 degrees• Disc Diameter: 330mm, 8 holes• Weight: 45 kgs

Model PO-350A-S• Vertical Weight Capacity: 180 kgs• Horizontal Weight Capacity: 350 kgs• Speed Range: 1 – 16 rpm• Table Tilt: 0 to 135 degrees• Disc Diameter: 330mm, 8 holes• Weight: 70 kgsg g

• Functions: On/Off power switch, Weld/Test switch, Welding Speed potentiometer, Start Delay Timer, Overlap Timer, Forward/Stop/Reverse switch, Automatic/Manual switch, S-model Control allows return to origin function.

g g• Functions: On/Off power switch, Weld/Test switch, Welding Speed potentiometer, Start Delay Timer, Overlap Timer, Forward/Stop/Reverse switch, Automatic/Manual switch, S-model Control allows return to origin function.


AUTOMATIC WELDING CARRIAGES

ROBOWEL SH-710-TDOUBLE-SIDE AUTO WELDING CARRIAGE

•Applicable to the fillet welding of shipbuilding and steel pier structures.

ROBOWEL SH720-MI MINI AUTO WELDING CARRIAGEExclusively built to make horizontal fillet automatic welding possible, this machine is considerably lighter in weight and smaller in size than other conventional 1-torch p g p

• The minimal radius of application - 2m. • Easy to operate, and durable • Strong traction power, enough to pull 2 torch cables • Minimizes the deformation of welding material since welding is carried out on both sides

machines, and therefore easier to handle. The machine is capable of automatically tracking the fillet welding areas horizontally during the welding process. It is also designed to sense the end of the welding job, so that it will automatically shut off when the welding job is complete. By out on both sides

• Travel Speed: variable, max. 1200mm/min• 4 motor-driven rubber wheels• Seam tracking by 2 roller guides• AC 220V single phase 50/60hz

g j p ycontrolling the intensity of the magnet that moves up and down, the machine can be easily attached or removed from the welding material.• Travel Speed: variable, max. 1200mm/min• 4 motor-driven rubber wheels• Strong permanent magnet assures stableStrong permanent magnet assures stable travel & traction• Seam tracking by 2 roller guides• AC 220V single phase 50/60hz


ESAB Cutting Systems offers the most modern cutting equipment, from small motorized carriages to completely automated and programmed systems. ESAB has a cutting machine for virtually every requirement and can customize these machines to meet the needs of your business.

FALCON. The robust FALCON can be used for plasma, oxy-fuel, or a combination of both. This makes the FALCON a remarkably versatile machine that can meet the needs of your current production and with opportunity to upgrade in the future if your cutting demands changeproduction and with opportunity to upgrade in the future if your cutting demands change. FALCON delivers the best cost/production ratio in its class.

• Easy installation

• 4 sizes available: 2m, 2.5m, 3m & 3.5m

• Up to 4 carriagesp g

• Operation speeds up to 9000 mm/min

• Oxy-fuel cutting up to 150mm

• Plasma system up to 150A


CNC CUTTING MACHINES

• Models ranging from small size entry level machine to large gantry for up to 11m cutting widths• Plasma, Oxy-fuel, Marking stations• AMG proprietary controller with powerful functions


WELDING ROBOTS

Total Solutions from the Single Source ProvidergAutomate your welding with OTC Arc Welding RobotsPRODUCTIVITY. Increases your productivity and cycle time even with limited space, manpower and even skill. Robots work 24/7 without making mistakes and material wastage. QUALITY. Even & beautiful bead appearance, consistent weld penetration & assured weld quality. Repeatable and consistent welds are obtainable weld after weld, shift after shift.COST SAVINGS. Consumable materials & parts are maximized & coupled with increased productivity, result in significant cost savings.FLEXIBILITY. Hard to reach or manipulate parts are welded with more ease by welding robots.SAFETY Exposure of operator to arc flashes fumes and heat are minimizedSAFETY. Exposure of operator to arc flashes, fumes and heat are minimized, resulting in better working environment.IMAGE. You gain the advantage of a high-tech image over your competitors.

MAGNETIC DRILLS

ELECTRO-MAGNETIC HOLE CUTTING MACHINES

Broach cutting is a well-proven technology which cuts very accurate holes through metal much more quickly than traditional twist drills. By removing material only at the periphery of the hole, the cutter leaves a solid slug which is ejected at the end of the cut, so a much smaller proportion of material is converted to chippings – requiring less power and taking less time.

MAGNETIC DRILLS

Benefits:• Faster Cutting• Greater Productivity• Longer Tool life• Longer Tool life• Cost Reductions• Versatility – shop or site• Portability• Reliability• Operator Safety

HSS Annular Cutters

BEVELING EQUIPMENT

CHP 12 Beveling Machine The CHPCHP-12 Beveling Machine. The CHP-12 is the most universal machine because it covers 80% of the applications for its type. It is versatile, adaptable and is easily transported on its own trolley. This machine performs 2,6 m/min. bevel to produce welding seamsm/min. bevel to produce welding seams with 12 mm. depth in plates up to 40 mm. thickness and 40Kg/mm2 strength.

PIPE MACHINING EQUIPMENT

200 SERIES ID-MOUNT BEVELLERS. The ID mounted beveling operation utilizes an expandable mandrel which is slid into the openexpandable mandrel which is slid into the open end of the pipe. A draw nut is tightened, which expands the mandrel blocks up a ramp and against the ID surface for positive mounting, self centered and squared to the bore. As the tool bit is fed into the material from the end, a bevel is produced which conforms to the angle p gpredetermined by the angle ground into the bit. Bits are available for practically any material or beveling angle required, and bits can be custom made for any form tooling operation.

600 SERIES CLAMSHELLS. The split frame design of the "Clamshell" lathe allows the machine to separate and mount around the OD of the in-line pipe

fitti f t t bl l ior fittings for strong, stable clamping. Clamshells perform precision in-line sever or simultaneous sever/bevel operations, as well as weld end preparation and counterboring on open ended pipe. Clamshells are utilized in a wide variety of roles from tube and pipewide variety of roles from tube and pipe production to maintenance in power and processing plants. Their ease of use and dependability has made them the favorite of plant maintenance, welding, and production personnel throughout the world.

PIPE MACHINING EQUIPMENT

300 SERIES TUBE SQUARING Tube300 SERIES TUBE SQUARING. Tube Squaring produces burr-fee ends, critical for orbital welding. Feed is parallel to the centerline of the tube. Saddle style clamping uses two opposing saddles for precise positioning and to prevent tube distortion.

500 SERIES TUBE SEVERING. Perfect alternative to pipe saws that generate particulate contamination. For precision tube severing, a narrow sever bit is fed perpendicularly into the tube OD. The clamping method shown uses collets which are drawn into an outer ring with a tapered bore, providing positive, full contact grip.

WELDING ACCESSORIES

Type 5AC Portable Electrode DryerType 5AC Portable Electrode Dryer• A high quality portable holding oven to meet requirement for all certifications• Electrodes are easy loaded and unloaded• Small & compact with handle – easy to carry around• Heating element heats the entire length of the rod chamber – providing faster and more uniform heat di t ib tidistribution • Capacity: 5 kgs• Temperature: 150 deg C• Voltage: 240 VAC• Electrode sizes: up to 18”

BE-MS Series Bench Electrode Oven• High quality & durable holding, rebaking and reconditioning electrode ovens with mild steel casing.• A chimney effect that drives air upward along the center support bar, together with the oven’s rectangular shapesupport bar, together with the oven s rectangular shape and vented shelving, allows for exceptional heat flow pattern.• Removable shelving for use with flux and wire coils• Safety yellow color ensures high visibility• Heating element with UL approval• Electrode lengths up to 18”• With manufacturer’s inspection certificates and• With manufacturer s inspection certificates and calibration certificatesBE50MS• Capacity: 50 kgs• Temperature: 50 to 300 deg C• Voltage: 240/440V ACBE150MSCapacity: 150 kgs• Capacity: 150 kgs

• Temperature: 50 to 300 deg C• Voltage: 240/480VAC

WELDING ACCESSORIES

FE-MS Series Floor Type OvensFE MS Series Floor Type Ovens• High quality & durable holding, rebaking and reconditioning electrode ovens with mild steel casing.• A chimney effect that drives air upward along the center support bar, together with the oven’s rectangular shape and vented shelving, allows for exceptional heat flow pattern.

R bl h l i f ith fl d i il• Removable shelving for use with flux and wire coils• Safety yellow color ensures high visibility• Heating element with UL approval• Electrode lengths up to 18”• With manufacturer’s inspection certificates and calibration certificatesFE150MS• Capacity: 150 kgs• Temperature: 50 to 300 deg C• Voltage: 240/440V ACFE200MS• Capacity: 200 kgs• Temperature: 50 to 300 deg C• Voltage: 240/480VAC

Type 200L Flux Oven• A high quality & durable holding, rebaking and reconditioning flux oven with mild steel casing.• Designed for drying and dry storage of welding fluxes• Designed for drying and dry storage of welding fluxes• Thermostatically controlled with a temperature range from 60 to 400 deg C• Safety yellow color ensures high visibility• Heating element with UL approval• 200L or 150 kgs flux capacity• 230VAC

WELDING ACCESSORIES

AUTO DARKENING WELDING HELMETS

OTOS AUTO-DARKENING WELDING HELMET• W-21V cassette filter

AUTO-DARKENING WELDING HELMETS

• Lightweight helmet made of polyamide nylon with crystal urethane coating for protection against heat and to prevent scratching to the shell.• Power provided by a replaceable battery with solar-assist• Adjustable shade from DIN 9 to 13 with grinding shade DIN 4

Mach 1

shade DIN 4.• Switching speed from light to dark 1/16,000 seconds and dark to light from 0.1 to 1 second.• Sensitivity adjustment to adapt to different welding environment• Specially-designed anti-bacteria and anti-smell sweatband

Chameleon 2

OPTECH AUTO-DARKENING WELDING HELMET• Solar-powered, no battery required• Helmet made of lightweight, high-impact and heat-resistant plastic/polyamide nylon• Switching time from light to dark in 1/30,000 seconds• Dark to light adjustable switch• High/Low sensitivity switch• Adjustable shade from DIN 9 to DIN 13

S998a

WELDING ACCESSORIES

WELDING ACCESSORIES

Triangle Premium Welding Cable• Designed to provide the optimum combination of flexibility and strength• Very fine 0.2mm copper wires are used to construct a flexible conductor that complies with all international standards• A double insulation system is extruded over the conductor to provide electrical strength and durability• Outer sheath is a specially formulated synthetic rubber compound that resists oils, solvents, ozone, sea water and prolonged ultraviolet exposure.• Bright orange sheath does not sustain combustion g gand self-extinguishes immediately upon removal of the flame source• Cable is meter-marked to provide a guarantee on the correct cable quantity and is useful for stock-takes and issuing of cable to users•

WELDING ACCESSORIES

DONG IL CERAMICSC.B.M. Ceramic Backing Material• C.B.M. is a ceramic backing material that is employed for one-side welding technique particularly for FCAW, GMAW, SAW and EGW processes.• Widely used for shipbuilding, marine structures, plants and other steel structures• It eliminates back-gouging, thus increasing productivity and reduces costs.• C.B.M. is composed of adequately mixed natural inorganic substances that are heat-treated at high temperaturesp• Excellent shock resistance to rapid heating and rapid cooling. Maintains superb stability against high temperatures, creating excellent bead appearance on the back side• Causes no change or reaction of steel during welding

For FCAW and GMAW welding. The most commonly used C.B.M. in shipbuilding, ocean, plant and steel structures. Application procedures include shield-metal arc welding and gas-metal arc welding. This CBM incorporates an all-purpose groove for greater reinforcement and a knuckle joint for application on circumferential seams as well as flat seams of all mild and high tensile steels.

WELDING ACCESSORIES

ELECTRODE HOLDERS

GROUND CLAMPS CABLE CONNECTORS

MACHINE CONNECTORS

WELDING HELMETS WELDING GLOVES

WELDING CURTAINS WELDING BLANKETS FIRE BLANKETS

CARBON ARC GOUGING TORCH

GOUGING CARBONS LIGHTERTIP CLEANER

OXY-FUEL TWIN HOSE

WELDING ACCESSORIES

WELDING CHEMICALS

WELDING CONSUMABLESSMAW

ESAB Welding Electrodes • OK 48.04 VP Low Hydrogen Welding Electrodes – AWS E7018• E308L-17 Stainless Welding Electrodes – AWS E308L-17• E309L-17 Stainless Welding Electrodes – AWS E309L-17• E316L-17 Stainless Welding Electrodes – AWS E316L-17• ESAB 350 Hardfacing Electrodes – AWS E1-UM-300ESAB 350 Hardfacing Electrodes AWS E1 UM 300• ESAB 550 Hardfacing Electrodes – AWS E6-UM-55-R• ESAB 650 Hardfacing Electrodes – AWS E10-UM-60-Z• ESAB 13Mn Hardfacing Electrodes – AWS E7-UM-200-K• OK 21.03 Chamfering Electrodes• OK 68.81 Welding Electrodes – AWS E312-17• OK 84.76 Sugar Mill Roll Roughening Electrodesg g g• OK 92.18 Cast Iron Welding Electrodes – AWS ENi-CI• OK 92.58 Cast Iron Welding Electrodes – AWS ENiFe-CI• OK 94.25 Bronze Welding Electrodes – AWS EL-CUSn7

TIANJIN BRIDGE Welding ElectrodesTIANJIN BRIDGE Welding Electrodes • J421 Mild Steel Welding Electrodes – AWS E6013• J506FE Low Hydrogen Welding Electrodes – AWS E7018• A102 Stainless Welding Electrodes – AWS E308-16

GOODWELD Welding ElectrodesGOODWELD Welding Electrodes • G308 Stainless Welding Electrodes – AWS E308-16• G308L Stainless Welding Electrodes – AWS E308L-16• G309L Stainless Welding Electrodes – AWS E309L-16• GC55 Cast Iron Welding Electrodes – AWS ENiFe-CI• GC100 Cast Iron Welding Electrodes – AWS ENi-CI

WELDING CONSUMABLESCO2/MAG/MIG & FCAW

Mild Steel CO2/MAG Welding Wires• TIANJIN BRIDGE AWS ER70S-6 sizes 0.8mm, 0.9mm, 1.0mm & 1.2mm in 15-kg spools• LANYU AWS ER70S-6 sizes 0.8mm, 0.9mm, 1.0mm & 1.2mm in 15-kg spools• LANYU AWS ER70S-6 sizes 1.2mm in 250-kg drums

Stainless Steel MIG Welding Wires • MENAM AWS ER308L sizes 0.8mm & 1.0mm x 12.5-kg spools

Aluminum MIG Welding Wires • ESAB/Alcotec AWS ER1100 size 1.2mm x 16-lb (7.3 kg) spools( g) p• ESAB/Alcotec AWS ER4043 sizes 0.8mm, 0.9mm & 1.2mm x 1-lb (0.45 kg) spools• ESAB/Alcotec AWS ER4043 sizes 1.0mm & 1.2mm x 16-lb (7.3 kg) spools• ESAB/Alcotec AWS ER5356 sizes 0.8mm, 0.9mm & 1.2mm x 1-lb (0.45 kg) spools• ESAB/Alcotec AWS ER5356 sizes 0.8mm, 0.9mm, 1.0mm, 1.2mm & 1.6mm x 16-lb (7.3 kg) spools

• WELDMAX AWS ER4043 size 0.8mm x 0.5 kg spools• WELDMAX AWS ER4043 sizes 1.0mm & 1.2mm x 6-kg spools• WELDMAX AWS ER5356 sizes 0.8mm, 0.9mm, 1.0mm & 1.2mm x 6-kg spools

Mild Steel Flux Cored Welding Wires • ESAB DS7100S AWS E71T-1 sizes 1 2mm & 1 6mm x 15 kg/spoolESAB DS7100S AWS E71T 1 sizes 1.2mm & 1.6mm x 15 kg/spool• GOODWELD GMX-71 AWS E71T-1 sizes 1.2mm & 1.6mm x 15 kg/spool

Stainless Steel Flux Cored Welding Wires • ESAB Shield Bright Xtra 308L AWS E308LT-1 size 1.2mm x 12.5 kg/spool• ESAB Shield Bright Xtra 309L AWS E309LT 1 size 1 2mm x 12 5 kg/spool• ESAB Shield Bright Xtra 309L AWS E309LT-1 size 1.2mm x 12.5 kg/spool• ESAB Shield Bright Xtra 316L AWS E316LT-1 size 1.2mm x 12.5 kg/spool

WELDING CONSUMABLESTIG

Mild Steel TIG Filler Rods• LANYU AWS ER70S-6 sizes 2.4mm & 3.2mm x 1000mm

• ESAB OK Tigrod 12.64 AWS ER70S-3 size 2.4mm x 1000mm• ESAB OK Tigrod 12.62 AWS ER70S-2 size 2.4mm x 1000mm

Stainless Steel TIG Filler Rods • MENAM AWS ER308L sizes 1.6mm, 2.0mm, 2.4mm & 3.2mm x 1000mm• MENAM AWS ER316L sizes 1.6mm & 2.4mm x 1000mm

• ESAB OK Tigrod 308L AWS ER308L size 2 4mm x 1000mm• ESAB OK Tigrod 308L AWS ER308L size 2.4mm x 1000mm• ESAB OK Tigrod 316L AWS ER316L size 2.4mm x 1000mm

Aluminum TIG Filler Rods • ESAB/Alcotec AWS ER4043 sizes 1 6mm 2 4mm & 3 2mmESAB/Alcotec AWS ER4043 sizes 1.6mm, 2.4mm & 3.2mm • ESAB/Alcotec AWS ER5356 sizes 1.6mm, 2.4mm, 3.2mm & 4.0mm• ESAB/Alcotec AWS ER4047 sizes 1.6mm & 2.4mm

• WELDMAX AWS ER4043 sizes 2.4mm & 3.2mm• WELDMAX AWS ER5356 sizes 1.6mm, 2.4mm & 3.2mm• WELDMAX AWS ER4047 sizes 1.6mm & 2.4mm

WELDING CONSUMABLESSUBMERGED ARC WELDING

ESAB• OK12.22 Submerged Arc Welding Wire AWS EM12K size 4.0mm x 30-kg/coil• OK10.71 Submerged Arc Welding Flux 25-kg/bag

TIANJIN BRIDGE • THM-43A Submerged Arc Welding Wire AWS EM12K sizes 3.2mm & 4.0mm in 25-kg coils• THM-43A Submerged Arc Welding Wire AWS EM12K sizes 3.2mm & 4.0mm in 200-kg coils• SJ-301 Submerged Arc Welding Flux 25-kg bag• SJ-501 Submerged Arc Welding Flux 25-kg bag

Products Presentation Major (1)

Documents

Transcript of Products Presentation Major (1)