Products for Medical Device Manufacturers€¦ · AMP D-sub assembly with custom receptacle to...
Transcript of Products for Medical Device Manufacturers€¦ · AMP D-sub assembly with custom receptacle to...
Products for Medical Device Manufacturers
AMP
Axicom
CII
Crompton Small Motors
Elo TouchSystems
Hartman
Kilovac
M/A-Com
Madison Cable
MID
OEG
P&B
Precision Interconnect
Raychem
Introduction
Table of contents
In the operating suite, doctor’s office or at the bedside,
medical equipment resides in unique environments.
Diagnostic, treatment and monitoring devices have critical
power and signal requirements. Components must be durable,
rugged and always reliable.
Tyco Electronics understands the vital connections that
dependably deliver images, data and power. From antennas
to Z-series filters, Tyco Electronics components…batteries,
cable, connectors, contacts, displays, filters, motors, heat
shrink, labels, molded parts, relays, passive components,
printed circuits, sensors, tubing, touchmonitors, wireless
devices…assemblies and capabilities provide the innovative
electronics that medical device OEMs require for their mission
critical products.
And if the solution doesn’t already exist, Tyco Electronics
engineers take on the challenge—providing parts, packaging
and program solutions for the next generation of medical
equipment.
Hand-held cable assemblies ................................................................... 4 & 5
Connectors and custom cables ........................................................... 6 & 7
Custom solutions................................................................................................... 8
Peripheral interconnects ................................................................................. 9
Internal wiring and components ......................................................... 10 & 11
Printed circuits and devices ................................................................ 12 & 13
User interfaces ...................................................................................................... 14
Components for portables ............................................................................. 15
4
Hand-held cable assemblies
Connect physicians to patients with cable assemblies for hand-held medical devices.
Cable assemblies that
connect hand-held
devices to diagnostic,
surgical or monitoring
equipment must supply
unique electrical,
mechanical and
environmental qualities.
Ergonomic COMFORT cable assemblies
Low profile ERGOLINE ECG patient cable and lead wires
Durable grabber clips for snap electrodes
Intuitive grip area on PI Plastic Medical Connector
On ultrasound transducers, video arthroscopes, surgical instruments and patient monitors, Precision Interconnect cable assemblies are built on a history of solutions for hand-held requirements.
Patient Comfort
The pull of a cable against the skin, a tug on the bed clothes…caregivers know how little things can be uncomfortable for patients. Low profile, custom molded components; lightweight, flexible cables; and soft-touch and low friction surfaces add value understood by the end-user.
Ergonomics
The ideal hand-held medical device is light, comfortable and easy to handle. Size, weight and flexibility are part of a well designed cable assembly.
5
Hand-held cable assemblies
Connect physicians to patients with cable assemblies for hand-held medical devices.
Single-use assembly for disposable application
Fiber optic light tube in custom assembly
BASIS cable assemblies suitable for sterilization
Sterilization
Whether destined for use in the O.R., treatment room or clinic, cable assemblies must be suitable for appropriate disinfection and/or sterilization procedures. Depending on the application, materials and seals are selected to be compatible with EtO, autoclave, low temperature cycles (such as STERIS and STERRAD), CIDEX soaks or IPA wipe down.
Durability
Nicked by scalpels…rolled over by gurneys…twisted and torqued…cable assemblies in the hospital or clinic must be resilient and reliable. Tough, yet flexible cable jackets, molded components and connector hardware are designed to withstand this demanding environment.
Electrical requirements
Data for critical care decisions cannot be compromised. Designing for the application, Tyco Electronics engineers understand high noise environments, RFI/EMI compliance, high voltage devices, capacitance/impedance consistency and tight tolerances on electrical characteristics.
Economics
In the world of medical devices, single-use and limited-use components need to be as thoughtfully designed and manufactured as reusable products. With proper design, material selection and manufacturing around the globe, disposable and limited reuse assemblies are fully engineered and efficiently manufactured.
6
Robust, sealable PI CIRCULAR connectors
High density CPC-Medical connectors
Next generation density AMP TC-ZIF connectors
Secure latching on PI Plastic Medical Connectors
156 and 260 AMP M-ZIF connectors
6 pin AAMI style connector for ECG equipment
Connectors and custom cables
Engineered for medical equipment…
Tyco Electronics connectors designed for medical applications provide the densities, durability and options desired by equipment designers and equipment users.
Plastic or metal round connectors are available in a variety of shell sizes, pin counts and configurations—including contacts for combined power and signal applications. Keying, polarization, sealing capability and molded strain reliefs are features selectable within specific families. Some families are compatible with existing interfaces. Mating receptacles suitable for panel mount are available for most families. Some connectors are terminated to cable and furnished as a complete assembly.
Satisfy unique requirements with connectors, cables and options too numerous to mention.
7
Connectors and custom cables
The power, data and signal connection…
It all begins with cable from Tyco Electronics brands like Madison Cable, Precision Interconnect and Raychem. A wide range of cable configurations are used to move scanners, video surgeries, power scalpels and transmit vital signs on imaging, treatment and monitoring equipment.
Madison Cable composite cables provide power and control to MRI, x-ray and other imaging equipment. Combinations of coaxes, singles and twisted pairs are cabled to suit a variety of non-invasive medical applications including imaging, monitoring and power distribution.
Flexible yet rugged, lightweight and flame retardant Raychem SPEC 44 and SPEC 55 cables are suited to the challenging environments of medical equipment. Both products are also available as multi-conductor, shielded, jacketed cables.
Some applications require very small cables. Intracoronary and intravascular imaging devices present the ultimate in micro-packaging challenges. Precision Interconnect cables use signal conductors as small as 50 AWG in insulated singles, coaxes or twisted pairs. Other Precision Interconnect cables include multiconductor coaxial, composities and hybrids for imaging, surgical and monitoring devices.
©2004 Intuitive Surgical, Inc.®
1080 Coax Cable Individual 42AWG center condcutors
Many varieties of Raychem cables
MADISON CABLE imaging cable
PRECISION INTERCONNECT micro miniature coax
Satisfy unique requirements with connectors, cables and options too numerous to mention.
8
Leveraging its experience in connector manufacture, Tyco Electronics meets packaging and functionality challenges with AMP stamped and formed blades, holders (and many, many other possibilities) as well as custom contacts to meet specific demands. Integrated MID components of thermoplastic and conductive materials can reduce package size and improve functionality by combining features into a single device.
Pair a single-use cable with overmolded housing and strain relief and an AMP D-sub assembly with custom receptacle to create an efficient system of
disposable SPO2 sensors and reusable SPO2 trunk cables for a monitoring application.
Size, durability and compatibility with cleaning solutions are important issues when connecting a temperature probe to its hand-held unit. This turnkey solution involves thermoplastic over-molding, spring pin contacts, printed circuitry and a sealed header.
With its materials, design and manufacturing experience and facilities, Tyco Electronics goes beyond the standard in providing product innovations and custom solutions.
Custom components solve circuitry and footprint challenges.
Custom solutions
From its depth of
experience
in component design and
global manufacturing
capabilities, Tyco
Electronics is prepared to
create a solution where
one doesn’t yet exist.
Reusable cable with EIA 232/422 interface
Custom overmolded connectors for disposables
Printed circuits, spring pin contacts and overmolded housings
Stamped and formed contacts MID molded integrated components
Progressive products demand innovative components. Precision metal forming, precious metal plating, thermoplastic injection and overmolding…capabilities in connector research, cable design and printed circuits…and skilled labor for component subassemblies and complete interconnect systems…Tyco Electronics is ready for the next generation of medical devices.
9
The key to reliability is the right connection.
Peripheral interconnects
Every cable interconnect
must support unique
electrical, programming
and mechanical
requirements—whether
signal speed, shielding,
contact density, keying,
latching or appearance.
As a vertically integrated manufacturer, Tyco Electronics matches the right cable, the right connector, and the right standard to connect monitors, instruments and foot switches to their controlling devices.
AMP Subminiature D cable assemblies with shielded cable and AMPLIMITE connectors—the industry’s most extensive and versatile—support a variety of data protocols.
Tyco Electronics produces a wide range of AMP standard cable assemblies for connecting devices including USB, FIREWIRE, DVI, SCSI Ultra, PC Card, SATA, Ethernet, coaxial and fiber optic.
With its extensive engineering resources, cable and connector manufacturing expertise and global manufacturing facilities, Tyco Electronics can adapt, modify or create a custom cable assembly for current and next generation box-to-box interconnects.
Data integrity, image reliability—make the connection with Tyco Electronics cable assemblies.
Digital Visual interface cable assembly
AMP USB cable assembly
Printed circuits, spring pin contacts and overmolded housings
Fiber optic componentsand assemblies
10
Customer-driven designs harness innovative
Internal wiring and components
With innovative components, global capabilities and a customer-driven approach to wiring solutions, Tyco Electronics provides complete connector and harness design and production. Modeling, prototyping and testing services are available.
AMP board-to-board, card-edge, backplane, wire-to-board connectors and IC sockets provide configurations for connecting virtually any circuit or device.
Tyco Electronics puts it
all together to meet the
mechanical, electrical,
EMI and environmental
challenges faced by
medical equipment
designers.
Many components create a custom wire harness
AMP M Series pin and socket connectors
One-piece AMP PCB Connectors Modular AMPMODU contacts, headers and assemblies
AMP MTA header and pre-loaded connectors
11
components for internal wiring systems.
Internal wiring and components
Raychem heat shrinkable tubing provides exceptional insulation, mechanical protection and strain relief. Used in splicing, breakouts and identification, heat shrink products are available in many forms, various shrink ratios and custom configurations.
AMP and Madison Cable flat ribbon and flat, multi-pair, highly lexible cables are low profile, easy routing connections suitable for a variety of low voltage requirements.
Precision Interconnect BLUE RIBBON micro coax cables for board-to-board data bus connections can be terminated to a variety of hardware including AMP MICTOR connectors, AMP CHAMP connectors and .100 headers.
Supplying the part or the whole, Tyco Electronics understands the components and the connections for crucial circuitry.
Protect cables with RAYCHEM molded parts
PVC IDC ribbon cables PRECISION INTERCONNECT BLUE RIBBON micro coax
Dependable protection with RAYCHEM heat shrinkable tubing
12
Specify components, subassemblies and
Printed circuits and devices
t Tyco Electronics is one of the largest
producers of printed circuits in the world.
Production of PCBs (2 through 68 layers),
flex and rigid flex circuits, bonded heat
sink
assemblies, backplane assemblies, sub
and full-system assembly is supported
by engineering services from concept
through modeling, assurance, integration
and test.
Circuits, components,
accessories…
PCBs
Circuit protection Magnetic components
Flex circuits
Identification and labeling systems
t Raychem Circuit
Protection markets a
complete line of
Polyswitch resettable
devices, Sibar thyristor
surge protectors, ROV
metal oxide varistors and
protected power switches
as well as magnetic
components from CoEv Magnetics.
t Raychem identification products
include a variety of stock as well as
hardware, software and technical
support.
Custom labels can be partially
printed with logos and graphics for
finishing at customer sites using
printing systems also available from
Tyco Electronics.
13
systems from antennas to Z series filters.
Printed circuits and devices
…Tyco Electronics has the most electronics including…
Sensors
Passive devices
Switches
Relays and timers
RFI/EMI filters Small motors
t…virtually any type
of switch. Alcoswitch
products also include
knobs, boot, caps and
other accessories…
t…a wide range of
sensors including
pulse wire, PLCD,
position, rotational
and touch sensors…
t…and relays, timers and contactors by Axicom, CII, Hartman, Kilovac, OEG, and P&B, as well as Tyco
Electronics with options for enclosure, termination, input,
contact arrangement and rating.
tt Power line filters, specifically developed
for health care applications, are available in
a variety of current ratings and case styles.
t For small pump or compressor
applications, products from the Crompton Electronic Motors line fit where space is at
a premium.
…capacitors,
inductors, resistors,
transformers and
other devices… u
14
Simplify complex technology with user-friendly interfaces.
User interfaces
In patient monitoring, information systems and education applications,
Elo TouchSystems touchscreens and touchmonitors provide an efficient,
responsive data entry mechanism, help reduce the chance of errors and allow the
clinician to focus on the patient. Medical touchscreens are completely sealable,
and can be activated by rubber gloves, fingertips and pens. Custom adaptations
and solutions are available.
Tyco touch control technology sensors are robust, solid-state-based touch
controls available on keypads or electronic control systems built to customer
specifications. Tyco Electronics turnkey design and manufacture of PCBs,
connectors, cable assemblies and power switching components (including relays,
contactors, transformers and circuit breakers) creates a touch interface adaptable
to any dielectric material suitable for harsh environments. Key sizes and graphics
are designed per customer specifications.
Custom printed overlays provide durable and sealable identification for
electronics devices. Screen-printed control panels, fascias and membrane switches
are manufactured from a broad selection of materials with gloss or textured
finishes, in various thicknesses and with adhesive backing if desired.
Custom graphics and touch technology create user-friendly interfaces and
keep the focus on the patient instead of the equipment.
Put simplicity and
accuracy at the
user’s fingertips with
touchscreens, touch
sensors and custom
printed overlays.
Ergonomic Touch Control Technology sensors
Custom printed overlays and fascias
19” LCD MedicalDesktop touchmonitor
Adaptable chassis mount ELO LCD monitor
15
Tyco Electronics provides solutions with devices for signal transmission, battery
power and connecting components.
M/A-COM discrete and integrated products deliver breakthrough performance
with RF components, handsets and antennas. M/A-COM devices can be combined
into single and multi-function components for cost-effective, high volume
solutions.
Elastomeric connectors form a compression surface-to-surface connection
enabling economical, high density, high reliability connections in space
constrained, hand-held electronic products. Custom solutions incorporating
holders or seals can be provided.
Tyco Electronics supplies power within the constraints of small form-factor
portable devices. With either lithium ion, nickel cadmium or nickel metal hydride
batteries, Tyco Electronics can design custom battery packs that increase
functionality while reducing size, weight and cost.
When the design requirements call for portability, Tyco Electronics
components and systems connect the care to the patient.
Portability poses circuitry and packaging challenges.
Components for portables
The shrinking size of
portable electronics
requires more features—
more functionality—in
less space.
Breakthrough performance with M/A-Com devices and antennas
Increase functionality with custom battery packs
Where space is limited—elastomeric connectors