PRODUCTIVITY, NO MATTER WHICH WAY YOU CUT IT....Drive motor HP 0.3 Squeegee width in 35 Vacuum motor...
Transcript of PRODUCTIVITY, NO MATTER WHICH WAY YOU CUT IT....Drive motor HP 0.3 Squeegee width in 35 Vacuum motor...
1
PROFESSIONAL | SABER CUTTER 26
PRODUCTIVITY, NO MATTER WHICH WAY YOU CUT IT.Cover more ground in less time while saving water and chemical with this proven walk-behind scrubber.
1 2 3
4 5
Easy to Maintain
Simple daily maintenance or service operations increase productivity.
Wide open, easy access to batteries for daily maintenance.
The easily removed front panel provides total access to brush and
vacuum motors. The no tool removal of the brush shrouds makes it
simple to mount and remove brushes or pad drivers.
Convenient recovery tank clean-out.
Brushes or pads can easily be accessed for replacement or clean-up.
Easy to Use
Saber Cutters feature an intuitive control panel with all operational
functions within easy reach to reduce training times and increase
operator productivity.
The dramatic sloped design gives the operator the safety of an
outstanding view of the work area.
Convenient built-in accessory compartment for cleaning supplies, pads
or brushes.
Aqua-Mizer green cleaning
Extends scrubbing times between refills by using cleaning solution
more efficiently.
Keeps solution in the scrubbing area longer, allowing the flow to be
set at the lowest level while still providing enough solution to do the
cleaning job.
Increases run-time productivity by up to 50% per tank fill up.
Saber Cutter walk-behind scrubbers are built to make the operator more productive. These scrubbers give the operator and the
maintenance person performance and convenience features they need to get the job done faster. To help you choose the most
productive walk-behind for your facility, the Saber Cutter can be tailored to meet a variety of cleaning needs. The Saber Cutter Series
can be ordered with different cleaning widths, battery systems and solution tank capacities.
The Saber Cutter comes standard with our water and chemical saving Aqua-Mizer™ system. By using cleaning solution more efficiently,
the Aqua-Mizer extends the time between tank refills by up to 50%. The Aqua-Mizer is part of an advanced scrubbing and pickup system
that make the Saber Cutter scrubbers the best value on the market for cleaning efficiency and safety.
Productivity, no matter which way you cut it.
2
Technical Specifications and Order Numbers.
Saber Cutter 26
TECHNICAL SPECIFICATIONS
Productivity (practical) ft2/hr 21,120
Brush motor (x2) HP 0.75
Brush pressure lbs 0–150
Brush speed RPM 200
Capacity, recovery gal 25
Capacity, solution gal 23
Cleaning path in 26
Dimensions (L x W x H) in 64 x 21 x 45
Drive motor HP 0.3
Squeegee width in 35
Vacuum motor (three stage) HP 0.75
Weight (w/o batteries) lbs 346
ACCESSORIES
Order No. Item Description9.840-549.0 Emergency Shut Off Kit 24V/36V Saber Cutter (Dealer Installed)
8.602-583.0 Parking Brake Kit for 36V Saber Cutter (Dealer Installed)
8.600-029.0 Pad Driver for Saber Cutter 32" (2 required)
8.600-021.0 Pad Driver for Saber Cutter 26" (2 required)
8.600-022.0 Polypropylene Brush for Saber Cutter 26" (2 required)
8.600-023.0 Nylon Brush for Saber Cutter 26"(2 required)
8.600-024.0 Mild Grit Brush for Saber Cutter 26"(2 required)
8.628-383.0 Aggressive Grit Brush for Saber Cutter 26"(2 required)
Included with all machines Optional for all machines Included with some machines
EQUIPMENTOrder No. Item DescriptionSaber Cutter 26 with Aqua-Mizer, 24 Volt System, Mechanical Scrub Deck and On-Board Battery Charger
9.840-161.0 Saber Cutter 26 w/ 4 x 6V 250 A/H batteries, 24V 25A on-board charger w/ pad drivers
9.840-162.0 Saber Cutter 26 w/ 4 x 6V 305 A/H batteries, 24V 25A on-board charger w/ pad drivers
Saber Cutter 26 with Aqua-Mizer, 24 Volt System, Actuated Scrub Deck and On-Board Battery Charger
9.840-207.0 Saber Cutter 26 w/ 4 x 6V 250 A/H batteries, 24V 21A on-board charger w/ pad drivers
9.840-208.0 Saber Cutter 26 w/ 4 x 6V 305 A/H batteries, 24V 25A on-board charger w/ pad drivers
Saber Cutter 26 with Aqua-Mizer, 24 Volt System, Mechanical Scrub Deck and Stand Alone Battery Charger
9.840-160.0 Saber Cutter 26 w/ 4 x 6V 250 A/H batteries, 24V 21A C175 auto charger w/ pad drivers
9.840-154.0 Saber Cutter 26 w/ 4 x 6V 250 A/H batteries, 24V 21A C175 auto charger w/ poly brushes
9.840-158.0 Saber Cutter 26 w/ 4 x 6V 305 A/H batteries, 24V 25A C175 auto charger w/ pad drivers
9.840-155.0 Saber Cutter 26 w/ 4 x 6V 305 A/H batteries, 24V 25A C175 auto charger w/ poly brushes
9.840-159.0 Saber Cutter 26 w/ 4 x 6V 335 A/H batteries, 24V 25A C175 auto charger w/ pad drivers
9.840-156.0 Saber Cutter 26 w/ 4 x 6V 335 A/H batteries, 24V 25A C175 auto charger w/ poly brushes
9.840-310.0 Saber Cutter 26 w/ 4 x 6V 312 A/H AGM batteries, 24V 25A C175 auto charger w/ pad drivers
9.840-309.0 Saber Cutter 26 w/ 4 x 6V 312 A/H AGM batteries, 24V 25A C175 auto charger w/ poly brushes
Saber Cutter 26 with Aqua-Mizer, 24 Volt System, Actuated Scrub Deck and Stand Alone Battery Charger
9.840-204.0 Saber Cutter 26 w/ 4 x 6V 250 A/H batteries, 24V 21A C175 auto charger w/ pad drivers
9.840-200.0 Saber Cutter 26 w/ 4 x 6V 250 A/H batteries, 24V 21A C175 auto charger w/ poly brushes
9.840-205.0 Saber Cutter 26 w/ 4 x 6V 305 A/H batteries, 24V 25A C175 auto charger w/ pad drivers
9.840-201.0 Saber Cutter 26 w/ 4 x 6V 305 A/H batteries, 24V 25A C175 auto charger w/ poly brushes
9.840-206.0 Saber Cutter 26 w/ 4 x 6V 335 A/H batteries, 24V 25A C175 auto charger w/ pad drivers
9.840-202.0 Saber Cutter 26 w/ 4 x 6V 335 A/H batteries, 24V 25A C175 auto charger w/ poly brushes
9.840-313.0 Saber Cutter 26 w/ 4 x 6V 312 A/H AGM batteries, 24V 25A C175 auto charger w/ pad drivers
9.840-312.0 Saber Cutter 26 w/ 4 x 6V 312 A/H AGM batteries, 24V 25A C175 auto charger w/ poly brushes
3
Please contact us for more information:
North America
4555 Airport Way Denver, CO 80239 U.S.A.
Phone +1 800 444-7654 Fax +1 866 271-0520
Canada
6535 Millcreek Drive Unit 67 Mississauga, ON L5N 2M2 Canada
Phone +1 905 672-8233 Fax +1 905 672-3155
www.windsorkarchergroup.com
11
/20
16
· O
rder
No. A
41
0 · A
ll r
ights
res
erved
.