Production Design Presentation by Bob McDougall. Rolls Royce Phantom Scaling Emboss Rectangular...
-
Upload
baldric-heath -
Category
Documents
-
view
221 -
download
0
Transcript of Production Design Presentation by Bob McDougall. Rolls Royce Phantom Scaling Emboss Rectangular...
Weight Machine Project
Team 3– Bob– Brian– Joe
Key Points– Task delegation– Coordination– Precision– File Sharing
Tips and Tech Notes
The following slides detail various Inventor features that I found useful and efficient in completing my projects.
Shell
The Basics– Create an extrusion with at least 1 flat face– Select the particular flat face of the extrusion that
is to be removed– Specify the shell thickness needed– Click OK to remove the face and shell out the
interior of the extrusion
Rectangular Pattern
The Basics– Select a part feature or entire part– Select the direction for the array– Specify quantity of features or parts desired– Specify the spacing between the arrayed parts or
features– Click OK to create the rectangular pattern
Design Accelerator
The Basics– To access the Design Accelerator, click Tools on
the menu bar. Then select Design Accelerator from the drop-down menu.
– Once the Design Accelerator is accessed, various components can easily be created and inserted into drawings by following on-screen menus.