PRODUCT TRAININGPRODUCT TRAININGInstallationInstallation

Installation Walk-through

1. Run Setup.exe.NOTE: Running the MSI installer without installing the pre-requisite will give this message prompt.

Installer Pre-requisites• Visual C++ Runtime Redistributables 2008 SP1 x86

• Redmap License System

Note

If previous version of Re-Rite (6.2) installed settings within Web Browser will retain and reflect the original folders.

Installation Sequence

Installing Redmap License System

1. Click Next.

Installation Sequence

2. Fill up the Company Name and License System Port Number field.

Note: 32575 is the default License System Port Number.

This cannot be changed once installed…

Installation Sequence

• leaving the Company Name field blank:

• leaving the License System Port Number field blank:

Installation Sequence

3. Click ‘Install’ to begin the installation.

Installation Sequence

4. Click ‘Finish’ to exit the wizard.

Installation Sequence

Installing e-BRIDGE Re-Rite1. The Welcome Screen will be displayed. Choose a language from the dropdown list and click Next.

• English• French• German• Italian• Spanish

Installation Sequence

2. Read the License Agreement. Tick the ‘I accept the terms in the License Agreement’ and click Next if you accept. Click the Cancel button if you do not agree and to cancel the installation.

Installation Sequence

3. Choose the working directory for the e-BRIDGE Re-Rite installation.

Either click Next to accept the default destination (<SYSTEM DRIVE>:\Re-Rite) or click Change to install to a different folder.

Installation Sequence

4. Assign a port number for the e-BRIDGE Re-Rite Web Control Panel so that it can be accessed publicly. Click Next.

• leaving the Port Number field blank:

Note: 8080 is the default Port Number.

Installation Sequence

5. Click ‘Install’ to begin the installation.

Installation Sequence

6. Click ‘Finish’ to exit the wizard.

Environment Changes

1. Program Shortcut in Start > All Programs > Redmap Networks > License System containing: Software Activation and Help

2. Redmap RMLM20 Service (dependent on the e-BRIDGE Re-Rite service)3. The specified Redmap License System Port during installation is saved

in the registry:a. RMLM_Port registry key under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\e-BRIDGE Re- Rite\Parameters.

b. Port registry key underHKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Redmap RMLM20\Parameters

Redmap License System

Environment Changes

1. Program Shortcut in Start > All Programs > e-BRIDGE containing the following:a) Re-Rite (Link to the Web Control Panel)b) Re-Rite Setup Guide

2. e-BRIDGE Re-Rite specific services:a) e-BRIDGE Re-Rite (for the Re-Rite service)b) e-BRIDGE Re-Rite UI (for the Web Control Panel)

3. The specified Port Number during installation is being saved in a registry key named WebPort under the registry path:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\e-BRIDGE Re- Rite\Parameters.

e-BRIDGE Re-Rite

Software Activation Client

After the e-BRIDGE Re-Rite installation, the Software Activation window will be displayed.

Product List Pane

Toolbar

Registration Tabs

Registration Tabs

There are 2 registration tabs: Registration Keys and the Site Details Tab.

A. Registration Keys Tab

Unique alphanumeric key for software identification (RR700Q500596615394)Code generated using your hardware informationGenerated by the Registration Server using a combination of the Serial Number and Site Code entered

Registration Tabs

B. Site Details Tab

e-BRIDGE Re-Rite specific information:

• MFP Serial Number

• Industry

• Dealer

• Technician

Required for U.S. clients

only

MFP Serial Number Dialog

Clicking the ‘GET’ button in the MFP Serial Number field will display below dialog:

ToolbarToolbar

Manual RegisterLaunches the web server

URL for manual software registration.

Automatic RegisterAllows user to register software

automatically by sending the file containing the product and

customer information to the web server URL.

Manual UnregisterAllows user to unregister while

there is no internet connection available.

Automatic UnregisterAllows user to unregister

software automatically with internet connection

HelpOpens the Help

File.

Allows user to configure proxy settings to ensure

connection to URL.

Proxy Settings

Proxy Settings

• Use ProxyTick this check box to use the local settings. •AddressEnter the IP address of the proxy server.

• PortEnter the port number of the proxy server.

By default, the Proxy Settings in the Software Activation Client derive its value from the Proxy Settings of the Internet Explorer.

Saved in the registry entry ‘ProxyEnable’ and ‘ProxyEnable’ underHKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet

Settings***DO NOT ALTER THESE REGISTRY SETTINGS***

Automatic Registration

1. Launch the Software Activation.2. On the Product list Pane, click the product you want to register.3. In the Registration Keys tab, enter the Serial Number then click Apply to generate the Site Code.

4. Complete the required fields in the Site Details tab.5. On the toolbar, click Automatic Register.

NOTE: Make sure there is an available internet connection.

Manual Registration

1. Launch the Software Activation.2. On the Product list Pane, click the product you want to register.3. In the Registration Keys tab, enter the Serial Number then click Apply to generate the Site Code.

4. Take note of both the Serial Number and Site Code.5. On the toolbar, click Manual Register. This will open the Redmap

online registration web page using the default browser.(http://register.redmap.com/re-rite)

6. Complete the required fields including the Serial Number and Site Code.

7. Click Submit.Your Site Key is automatically generated and displayed in the registration confirmation page.

8. Enter the supplied key in the Site Key field on the Software Activation then click Apply.

Automatic Un-registration

1. Launch the Software Activation.2. On the Product list Pane, click the product you want to register.3. On the Toolbar, click Automatic Unregister.Once un-registered, the Status column in the Product List Pane will

display:

Trial if the product is still covered by the 30-Day Trial Period or Expired if the 30-Day Trial Period has already lapsed.

NOTE: Make sure there is an available internet connection.

Note: A Serial Number that has been un-registered on the same machine can still be used to re-register the product.

Manual Un-registration

1. Launch the Software Activation.2. On the Product list Pane, click the product you want to register.3. On the Toolbar, click Manual Unregister.

Click Yes to continue.Click No or Cancel to abort the un-registration process.

Manual Un-registration

5. Copy the Unregister.txt to a computer that has internet access.

4. A registration removal file, Unregister.txt, is created in the Re-Rite Working Directory.

6. Go to the Manual Un-registration Page of e-BRIDGE Re-Rite.(http://register.redmap.com/re-rite/unregform.asp)

Manual Un-registration

Upgrading from 6.2 and belowUpgrading from 6.2 and below

Choosing Yes will proceed with the upgrade sequence. Choosing No will abort the installation.

e-BRIDGE Re-Rite Version Check

Un-installationUn-installation

1. Select e-BRIDGE Re-Rite v7.0.0 from the list of installed Programs in the Control Panel.

2. Click Change/Remove to launch the e-BRIDGE Re-Rite installer for un-installation.

3. If your version of e-BRIDGE Re-Rite is currently registered, you will be prompted this message:

If you choose ‘YES’, the installer will automatically unregister e-BRIDGE Re-Rite.

If you choose ‘NO’, the installer will just uninstall e-BRIDGE Re-Rite from your machine.

Note: An available internet connection is required for this.

Un-installation

If the installer failed to automatically unregister when you choose ‘YES’ (e.g., no internet connection),

manual un-registration will be performed.

Un-installationUn-installation

The following files will be backed up during un-installation:

• Whitelist.txt• e-BRIDGE Re-Rite Parameters registry(HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\e-BRIDGE Re-Rite\Parameters)

Configuration files are retained in its original location:

%ALLUSERSPROFILE%\Application Data\Redmap\Re-Rite (for XP and 2003) %ALLUSERSPROFILE%\Redmap\Re-Rite (for Vista and up)

%ALLUSERSPROFILE%>/Application Data/e-BRIDGE Re-Rite (for XP and 2003) %ALLUSERSPROFILE%>/e-BRIDGE Re-Rite (for Vista and up)

InstallationInstallation

Task

Install Re-Rite 7

PRODUCT TRAININGPRODUCT TRAININGInstallationInstallation