PRODUCT DATASHEETThermal Derating Curve Page 3/6 A30 Series PTC Devices Derating Curves for A30...
Transcript of PRODUCT DATASHEETThermal Derating Curve Page 3/6 A30 Series PTC Devices Derating Curves for A30...
A30 Series PTC Devices
PRODUCT DATASHEET
Page 1/6
A30 Series PTC Devices
Description
The JDTFUSE A30 Series radial leaded device is designed to provide overcurrent protection for low voltage (≤30V) applications where space is not a concern and resettable protection is preferred.
Features
●
● ●
Cured, flame retardant epoxy polymer insulating material meets UL 94V-0 requirementsFast time-to-tripRoHS compliant, Lead-Free and Halogen-Free*
USB hubs, ports and peripheralsComputers & peripheralsMotor protectionGeneral electronicsAutomotive applications
Applications
● ● ● ● ●
Agency Approvals
Agency File Number
E472196
Regulation Standard
2002/95/EC
EN14582
Revised 08/04/19JDT FUSE Industrial Corp.
www.jdtfuse.com
Performance Specification
Environmental Specifications
Page 2/6
I hold = Hold Current. Maximum current device will not trip in 25°C still air.I trip = Trip Current. Minimum current at which the device will always trip in 25°C still air.V max = Maximum operating voltage device can withstand without damage at rated current (Imax).I max = Maximum fault current device can withstand without damage at rated voltage (V max).Pd = Power dissipation when device is in the tripped state in 25°C still air environment at rated voltage.Ri min/max = Minimum/Maximum device resistance prior to tripping at 25°C.R1max = Maximum device resistance is measured one hour post reflow.CAUTION : Operation beyond the specified ratings may result in damage and possible arcing and flame.
Model V max(V dc)
I max(A)
I hold@25°C
(A)
I trip@25°C
(A)
P dTyp.(W)
MaximumTime To Trip Resistance
Current(A)
Time(Sec)
R i min(Ω)
R i max(Ω)
R1max(Ω)
Test Conditions Resistance change
A30 Series PTC Devices
3030303030303030303030303030303030303030
A30-030A30-040A30-050A30-065A30-070A30-075A30-090A30-110A30-135A30-160A30-185A30-200A30-250A30-300A30-400A30-500A30-600A30-700A30-800A30-900
4040404040404040404040404040404040404040
0.300.400.500.650.700.750.901.101.351.601.852.002.503.004.005.006.007.008.009.00
0.600.801.001.301.401.501.802.202.703.203.704.005.006.008.0010.0012.0014.0016.0018.00
0.440.450.50.470.60.60.60.70.80.91.01.51.22.02.53.03.53.84.04.2
1.502.002.503.253.503.754.505.506.758.009.2510.012.515.020.025.030.035.040.040.0
3.005.004.105.004.305.205.906.607.308.008.7012.010.310.812.714.516.017.518.820.0
0.3000.2000.2500.2000.1400.1200.0700.0500.0400.0300.0300.0300.0200.0200.0100.0100.0050.0050.0050.005
1.1000.9000.6000.5000.2200.3700.2200.2000.1600.1400.1200.0550.0800.0700.0600.0500.0400.0300.0250.020
1.6001.3001.2000.8000.3500.4200.3000.2600.2200.1800.1500.0850.1000.1000.0900.0800.0600.0500.1800.025
Passive aging
Humidity aging
Thermal shock
Resistance to solvent
Vibration
Ambient operating conditions : - 40 °C to +85 °CMaximum surface temperature of the device in the tripped state is 125 °C
+85°C, 1000 hrs.+85°C, 85% R.H. , 168 hours+85°C to -40°C, 20 timesMIL-STD-202,Method 215MIL-STD-202,Method 201
±5% typical±5% typical±33% typicalNo changeNo change
Revised 08/04/19JDT FUSE Industrial Corp.
www.jdtfuse.com
Thermal Derating Curve
Page 3/6
A30 Series PTC Devices
Derating Curves for A30 Series
-40 -30 -20 -10 0 10 20 30 40 50 60 70 80
20
40
60
80
100
120
140
160
180
Temperature (°C )
Perc
enta
ge o
f Rat
ed C
urre
nt
Average Time-Current Curve
0.01
0.1
1
10
100
1000
011 100 CURRENT IN AMPERES
TIM
E IN
SEC
ON
D
0.90A 1.10A 1.35A 1.60A 1.85A 2.50A 3.00A 4.00A 5.00A 6.00A 7.00A 8.00A 9.00A 0.75A0.65A0.50A0.40A0.30A
Revised 08/04/19JDT FUSE Industrial Corp.
www.jdtfuse.com
Soldering Parameters
Page 4/6
A30 Series PTC Devices
Time
TP 260
100
25
Soldering 5Sea.MAX
Gradual Cooling
Pre-Heating 1 Minute Min.
Tem
pera
ture
(°C
)
Ihold Versus Temperature
Model- 40°C - 20°C 0°C 25°C 40°C 50°C
Maximum ambient operating temperature (Tmao) vs. hold current (Ihold)
60°C 70°C 85°C
0.440.580.730.951.011.101.311.601.962.322.683.133.634.355.807.258.7010.1511.6013.05
A30-030A30-040A30-050A30-065A30-070A30-075A30-090A30-110A30-135A30-160A30-185A30-200A30-250A30-300A30-400A30-500A30-600A30-700A30-800A30-900
0.390.520.650.850.951.131.171.431.762.082.412.803.253.905.206.507.809.1010.4011.70
0.350.460.580.750.840.931.041.271.551.842.132.352.883.454.605.756.908.059.2010.35
0.300.400.500.650.700.750.901.101.351.601.852.002.503.004.005.006.007.008.009.00
0.250.330.420.540.630.690.750.911.121.331.541.822.082.493.324.154.985.816.647.47
0.180.240.310.400.470.510.550.670.820.981.131.331.531.832.443.053.664.274.885.49
0.230.310.380.500.580.630.690.851.041.231.421.661.932.313.083.854.625.396.166.93
0.200.270.340.440.500.540.610.750.921.091.261.451.542.042.723.404.084.765.446.12
0.160.210.260.340.380.420.470.570.700.830.961.011.301.562.082.603.123.644.164.68
Profile Feature Pb-Free Assembly
Average Ramp-Up Rate(Ts max to T p)Preheat -Temperature Min(Ts min) -Temperature Max(Ts max) -Time(Ts min to Ts max)Time maintained above: -Temperature(TL) -Time(tL)Peak Temperature(Tp)Ramp-Down RateTime 25℃ to Peak TemperatureStorage Condition
3℃/second mac.
150℃200℃60~180 seconds
217℃60~150 seconds260℃6℃/second max.8 minutes max0℃~35℃,≤70%RH
Recommended reflow methods: IR, vapor phase oven, hot air oven, N2 environment for lead-freeRecommended maximum paste thickness is 0.25mmDevices can be cleaned using standard industry methods and solvents.Note 1:All temperature refer to topside of the package, measured on the package body surface.Note 2: If reflow temperatures exceed the recommended profile, devices may not meet the performance requirements.
Revised 08/04/19JDT FUSE Industrial Corp.
www.jdtfuse.com
Page 5/6
A30 Series PTC Devices
Physical Dimensions(mm.)
PHYSICAL SPECIFICATIONS :
Materials : Leads
Lead Solderability :
A30-030 ~ 250: Tin-platedcopper-cladsteel,0.205mm2(24AWG),Φ0.51mm(0.020in). A30-300 ~ 900: Tin-plated copper, 0.52mm2 (20AWG), Φ0.81mm(0.032 in).MIL-STD-202, Method 208E
Model FIGMax.
AMax.
B CMax.
DMax.
EMax.
A30-030A30-040A30-050A30-065A30-070A30-075A30-090A30-110A30-135A30-160A30-185A30-200A30-250A30-300A30-400A30-500A30-600A30-700A30-800A30-900
7.407.407.407.407.407.407.407.409.209.2010.210.213.213.214.014.017.219.123.525.5
12.712.712.713.014.214.218.518.517.620.220.217.722.420.423.724.927.027.029.230.0
7.67.67.67.67.67.67.67.67.67.67.67.67.67.67.67.67.67.67.67.6
5.105.105.105.105.105.105.105.105.105.105.105.105.105.105.1010.210.210.210.210.2
3.03.03.03.03.03.03.03.03.03.03.03.03.03.03.03.03.03.03.03.0
FMax.
0.900.900.900.900.900.900.900.900.900.900.900.900.901.201.201.201.201.201.201.20
11112122222223333333
Revised 08/04/19JDT FUSE Industrial Corp.
www.jdtfuse.com
Page 6/6
A30 Series PTC Devices
Cross Reference
“PolySwitch” is a registered trademark of Tyco Electronics.“POLY-FUSE” is a registered trademark of Littelfuse,Inc.“EVERFUSE” is a registered trademark of Polytronics Technology Corp.
Tape & Reel packaging per EIA468-B standard.
ModelTyco / PolySwitch® Bourns / POLY-FUSE® Polytronics / EVERFUSE®
Cross Reference
A30-030A30-040A30-050A30-065A30-075A30-075A30-090A30-110A30-135A30-160A30-185A30-250A30-300A30-400A30-500A30-600A30-700A30-800A30-900
------
RUEF090RUEF110RUEF135RUEF160RUEF185RUEF250RUEF300RUEF400RUEF500RUEF600RUEF700RUEF800RUEF900
------
MF-R090-0-9MF-R110MF-R135MF-R160MF-R185MF-R250MF-R300MF-R400MF-R500MF-R600MF-R700MF-R800MF-R900
------
RLD30P090UFRLD30P110UFRLD30P135UFRLD30P160UFRLD30P185UFRLD30P250UFRLD30P300UFRLD30P400UFRLD30P500UFRLD30P600UFRLD30P700UFRLD30P800UFRLD30P900UF
ModelR or UK or S135A30 Reel QTY Bag QTY
A30-030 ~ A30-075A30-090 ~ A30-250A30-300 ~ A30-400A30-500 ~ A30-900
R=Tape&reelU= Bulk
packaged
K= Kink leads
S=Straight leads
HoldCurrent
(A)
Radial type
30 V
-30001500
-
500500500500
Packaging Quantity
Revised 08/04/19JDT FUSE Industrial Corp.
www.jdtfuse.com