PRODUCT SUMMARY - Anode Huis - Anode Huis€¦ · ZINC anodes Several alloys are available which...

PRODUCTSUMMARY

2019

4

The most effective method to control undesirable effects of metal corrosion is Cathodic protection.

This technique, used worldwide since the 1930’s was originally introduced in the early nineteenth

century to meet the needs of the British Navy and also used, with excellent results, for the protection of

underground structures. When it comes to Cathodic protection, especially in the leisure craft, industry

(leisure craft industry) we usually think of sacrificial anodes. In fact the method is essentially divided into

two clearly defined technical areas: passive Cathodic protection (sacrificial anodes) and active Cathodic

protection (impressed current). Both techniques offer protection of metallic structures that are subject

to wet corrosion.

This is achieved by lowering the natural electrochemical potential of the metal to be protected by

inducing a flow of current between the anode and the cathode (structure).

There are many fields of application of Cathodic protection: marine (nautical, commercial, offshore,

inshore, industrial, etc.) to land applications (aqueducts, pipelines, oil pipelines, etc.) as well as those

applications where you need a specific defence against electrochemical corrosion.

Sacrificial anodes, more commonly known as “zincs”, are installed at specific locations on the

underwater section of a hull as part of a passive cathodic protection system. The objective is to

protect any metal structures immersed in water, from corrosion.

The principle of operation is very simple: the anode is made of an alloy which has an electrochemical

potential less than most metals used on a boat, which enables an electrochemical process to take

place.

A current will flow from the anode to the cathode (the metal structure to be protected) to equalise the

potential difference, resulting in the loss of electrons by the anode and its accelerated dissolution in

water. Consequently, the metal structure in contact with the anode, has a greater reserve of electrons

that are also utilised to power the electrochemical process which otherwise would have contributed

to the corrosion of its surface. In this situation

the metal is protected from the electrochemical

corrosion, depending on the type, quantity of

anodes fitted and their relative position.

To achieve this type of protection it is essential

to create a potential difference which induces a

current flow between the anode and cathode.

This is only possible by connecting the metal

material to be protected, with a metal of lower

nobility; as a consequence this will work as a

sacrificial anode.

Our objective in practise, whenever we install

sacrificial anodes on a metal structure, is to bring

the electrochemical potential of the metal to be

protected to a certain value (the so called protection

level) that generally appears to be more negative

than the initial one.

ABOUT CATHODIC PROTECTION

5

GALVANIC SERIES CHARTCorrosion potentials of materials in flowing seawater

GALVANIC SCALEIn order to protect a metal from corrosion, you have to sacrifice a more active one in its place. The most common metals used

for this purpose are zinc, aluminum and magnesium.

These metals act as anodes to the considered structure and the sacrificed material protects the structure itself, hence the words

"sacrificial anode".

Most metals have the ability to be oxidized (corrode) but some more easily than others.

Its relative index on the galvanic scale determines the corrosion rate.

Elements are listed according to their increasing nobility (from the top to bottom). Towards the bottom you find the ele-

ments with a lower electrochemical potential which, in a cathodic reaction, will corrode and form an anodic area as long

as they are in continuity with an element of higher nobility. In addition, metals and alloys close to each other have less

tendency to form strong galvanic pairs thus their coupling, in the presence of an electrolyte, is less of a concern than when

contact is made between metals or alloys much further apart on the scale.

6

SACRIFICIAL ANODES

Materials used for sacrificial anodesFor passive cathodic protection, sacrificial anodes are used. These can be made up of various alloys

which makes them suitable for use in different environments. The electrochemical potential according to

the galvanic or nobility scale of the materials previously illustrated, shows which metal can be sacrificed

to protect another one based on their position in the above-mentioned scale, with certain alloys more

suited to some environments than others. For example, in fresh water the most appropriate and popular

alloy used is magnesium.

Listed below are the internationally certified alloys used for the production of sacrificial anodes and their

features.

ZINC anodesSeveral alloys are available which comply with the U.S.MIL American standard, such as type 18001-H

(J-K), characterized by the addition of cadmium and aluminum. These are ideal for use in sea water, but

also used in lakes and rivers.

You can also get a strong anodic behaviour from zinc with a high purity (99.995%) without the addition

of other elements.

It is good practice to change anodes regularly, even if there has been little corrosion.

Use with temperatures that exceed 55 ° C is not recommended.

Element

ZINC ALLOY - LEGA IN ZINCO according US MIL Spec. A-18001K

ALUMINIUM ALLOY - LEGA IN ALLUMINIOaccording US MIL Spec. A24779 SH

• CADMIUM FREE •

MAGNESIUM ALLOY - LEGA IN MAGNESIOaccording US MIL Spec. A21412SH

• CADMIUM FREE •Range %

Aluminium Al 0,10-0,5 Remainder 5,00-7,00Cadmium Cd 0,025-0,07 - -

Copper Cu 0,005 max. 0,004 max. 0,01 max.Indium In - 0,014-0,02 -

Iron Fe 0,005 max. 0,08 max. 0,03 max.Magnesium Mg - - Remainder

Nichel Ni - - 0,003 max.Silicon Si - 0,08-0,20 0,03 max.

Zinc Zn Remainder 4,0-6,5 2,00-4,00Others Total - 0,10 max. 0,10 max. 0,30 max.

Nominal electrical capacity - Capacità elettrica nominale780 AmpHr/kg 2700 AmpHr/kg 1105 AmpHr/kg

Nominal open circuit potential - Potenziale-1050 mV

Ag/AgCl reference cell - Cella di riferimento-1100 mV


Ag/AgCl reference cell - Cella di riferimento

Density - 7,14 g/cm3 2,80 g/cm3 1,80 g/cm3

ALLOY SPECIFICATION OF TECNOSEAL STANDARD PRODUCTION

Element

ZINC ALLOY - LEGA IN ZINCO according US MIL Spec. A-18001K

ALUMINIUM ALLOY - LEGA IN ALLUMINIOaccording US MIL Spec. A24779 SH

• CADMIUM FREE •

MAGNESIUM ALLOY - LEGA IN MAGNESIOaccording US MIL Spec. A21412SH

• CADMIUM FREE •Range %

Aluminium Al 0,10-0,5 Remainder 5,00-7,00Cadmium Cd 0,025-0,07 - -

Copper Cu 0,005 max. 0,004 max. 0,01 max.Indium In - 0,014-0,02 -

Iron Fe 0,005 max. 0,08 max. 0,03 max.Magnesium Mg - - Remainder

Nichel Ni - - 0,003 max.Silicon Si - 0,08-0,20 0,03 max.

Zinc Zn Remainder 4,0-6,5 2,00-4,00Others Total - 0,10 max. 0,10 max. 0,30 max.

Nominal electrical capacity - Capacità elettrica nominale780 AmpHr/kg 2700 AmpHr/kg 1105 AmpHr/kg

Nominal open circuit potential - Potenziale-1050 mV



Ag/AgCl reference cell - Cella di riferimento

Density - 7,14 g/cm3 2,80 g/cm3 1,80 g/cm3

ALLOY SPECIFICATION OF TECNOSEAL STANDARD PRODUCTION

7

ALUMINIUM anodes (cadmium free)There are many different types of aluminium alloy anode currently available. These are characterized by

the addition of impurities such as zinc and indium. The exact contents of these impurities is important,

particularly in the cases of iron and copper which should not exceed 0.15% and 0.005% respectively.

The main characteristic of an aluminium anode is the high nominal electrical capacity, which is three times

higher than the same mass in zinc. By using aluminium in structures instead of zinc anodes, you require

significantly less aluminium anodes and it is therefore easier to manage their underwater installation or

subsequent replacement. Aluminium anodes are frequently used in industrial sectors, such as offshore

platforms or pipeline systems, where a long-term protection is required, usually over 15 years, and where

anodes replacement is expensive and difficult.

They are also used in the commercial sector, such as cargo ships, tankers or cruisers or where there are

long periods between planned dry dock activity. They are recommended for hulls which remain perma-

nently in water ( such as barges, house boats etc.). More recently, many outboard engine manufacturers

switched to using aluminium anodes due to the growing objection to the continued usage of zinc anodes

in some parts of the world. Cadmium which is a material always present in zinc alloy, can be considered

harmful to the sea.

MAGNESIUM anodesMagnesium alloys, which have potentials above 1500 mV (ref. Cu / CuSO4), are mainly used in the pre-

sence of high resistivity electrolytes (fresh water, soil, etc.)

All of them are characterized by the addition of manganese 0.2 ÷ 1.2% and for the most common versions

zinc 2 ÷ 4% and aluminum 5 ÷ 6%.These types can also be used in the presence of high temperatures,

such as inside a boiler.They are also suitable for structures that require fast effects or temporary cathodic

protection. Magnesium anodes have a performance of around 50% and while they have a fast-acting

use in marine environments, they also deliver a high degree of protection. However, due to the speed at

which they corrode, they are not recommended for use in brackish waters. Another limit to their use is

the fact that magnesium is a metal which can be difficult to store. It begins to corrode with the slightest

moisture in the atmosphere and is difficult to machine due to its potential to become a fire hazard.

8

THE TECNOSEAL RANGE

1 RUDDER AND TRIM TAB ANODES

2 HULL AND TRANSOM ANODES

3 SHAFT AND PROP ANODES

4 ENGINE ANODES

KITOMC-50-75 KITOMCCOBRA KITOMCSTRINGER KITOMC-V4-V6 KITETEC-G2

KIT

0090000100 - 00107

00156 - 00159

00500 - 00531

01050

01050

01080 - 01082

01020 01021 01023 03605 03607 00479 01036

03500

00484 / 00485

03501 03502

00480/6

01074-01075

00487 AUTOH5 0180200400SOLE/1

0103003508 01031

0105301051 01054 0105401052 01055 01042

00500USA - 00532USA 00550-00557 00550L - 00579/1 00500UK - 00513UK

00410 - 0041900400 - 00409E00400 - 00409

00271E

00350

00387/1

00630

TEC-DIVERS NACA AIRFOIL BARS

00351

00386/1 00388

00352 00385/1

00272E - 00273E 00274E 00300 - 00310

R1 - R7

00221 - 00223

00220

00270E

00101E - 00104E

00140 - 00154

00101UK - 00105UK

00269E

03503

00919

00904

00923

00907BIS

00928

00911

00932

00915

00936

00902

00921

00906

00926

00909

00930

00913

00934

00917

00938

00901

00920

00905

00925

00908

00929

00912

00933

00916

00937

00903

00922

00907

00927

00910

00931

00914

00935

00918

00939 00940

BRP (OMC / JOHNSON / EVINRUDE)

00800

00806

00811

00817

00801

00806BIS

00812

00818

00802

00807

00813

00819

KIT75-115EFI

KITBRAVOIII-04

KITALPHAONE GEN1

KITBRAVOII-III

KITALPHAONE

KITVERADO4

KITBRAVOI

KITVERADO6

KITF30-F40-F60

00803

00808

00814

00820

00804

00809

00815

00821

00805

00810

00816

00822

00823

00829

00835

00841

00824

00830

00836

00842

00825

00831

00837

00843

00826

00832

00838

00844

00827

00833

00839

00845

00828

00834

00840

KIT

MERCURY - MERCRUISER

SIDEPOWER - SLEIPNER

VARIPROP

LEWMAR

GORI

VETUS

MAX PROP

QUICK FERRETTI

SOLÈ DIESELAUTOPROP

VARIFOLD

RENAULT MARINE

VARIPROFILE

FLEX-O-FOLD

J PROP

KITBRAVOIII-04 KITBRAVOII-III KITVERADO4

KIT

HONDA

01400 01405

01408-2 01409

01401 01406

01410

01402 01407

01411

01403

01408 01412

01404

01408-1

9

THE TECNOSEAL RANGE

5 MISCELLANEOUS ANODES

4 ENGINE ANODES 4 ENGINE ANODES

01900 01904

01908 01913

01901 01905

01909 01914

01902 01906

01910 01915

01903 01907

01912 01916

SELVA YAMAHA

SUZUKI

TOHATSU

VOLVO PENTA

YANMAR

01200 01203 01206

01209

KITSUZUKI40-50 KITSUZUKI90-140 KITSUZUKI200-250

01211 01214

01201 01204 01207

01210 01212 01215

01202 01205 01208

01210-1 01213 01216

KIT

KIT

01250 01253 01256 0125901251 0125401257 0126001252 01255 01258

00700 00706-1

00710 00713TP

00715

00703 PLAC-2

00711 00714

00716

00704BIS 00707

00712 00714/1

00716T

00705 00708

00713

00714T 00716TP

00706

00709 00713T

00714TP 00717 00718

00726 00732

00735

00742

KITVOLVO280

KITVOLVODPH/DPR

KITVOLVODP280

KITVOLVOSX

KITVOLVO290

ITVOLVOELICA-3PALE

KITVOLVO290-C

KITVOLVOIPS

KITVOLVODP290

KITVOLVOSXA/DPSA

KITVOLVODP290-C

KITVOLVOXDP-B

00719

00727

00733 00736

00743

00728

00733-1 00737

00744

0072300722 00729

00733BIS 00738

00745

00724 00731

00734 00739AL

00746 00747

01100 0110601101 0110701101-1 01102 01103 01104 01105

01112-1 0111301108 0111401109 01110 01111 01112

01119 01120 0112101115 0112201116 01117 01118

01126 01127 01128 0112901123 0113001124 01125

01133 01134 01135 01136 0113701131 0113801132 01139

01174 01175

KITYAMAHA150-200

KITYAMAHA60-90

KITYAMAHA150-200CR

KITYAMAHA300-350

KITYAMAHA200-250

KITYAMAHA300-350XP

KITYAMAHA200-300

KITYAMAHA40-50

KITYAMAHA40-60

KITYAMAHA80-100

01176 01177

01140 01146-101141 0114701142 01143 01144 01145 01146

01153 0115401148 0115501149 0115601150 01151 01152

01159 01160T 01161 0116201156-1 0116301157 0116401158

01166 0117301167 01168 01169 01170 0117101165 01172

KIT

KIT

01300 01304 PLAC-1 01317

01390-1 01394-1

01301 01305

KIT1305-1 KIT1305-1C KITYANMAR 6LP/6LY/4LH KITYANMARSTD

01391-1

01302 01308

01320 01392-1

01305/1

01321 01319 01393-1

02650 02650 01450 01451 TEC-ZS1 PMSEAGROUND

CONDARIA FRIGOBOAT ISOTHERM ZINC SPRAY GROUND PLATES

10

THE TECNOSEAL RANGE Disc Anodes

h

Ø

h

Ø

type C

Ø

h

type A

h

type B

CODh Ø

mat. kg (mm) (mm) type pageCOD

h Ømat. kg (mm) (mm) type page

R1 ZN 0,120 7 47 B 23

R1AL AL 0,050 7 47 B 23

R1MG MG 0,030 7 47 B 23

00100 ZN 0,080 11 50 A 20

00100AL AL 0,030 11 50 A 20

00100MG MG 0,020 11 50 A 20

00100P ZN 0,140 16 50 A 21

00100PAL AL 0,050 16 50 A 21

00101E ZN 0,250 6,5 70 B 22

00101EMG MG 0,100 6,5 70 B 22

00101 ZN 0,190 13 70 A 20

00101AL AL 0,075 13 70 A 20

00101MG MG 0,055 13 70 A 20

00101P ZN 0,300 17 70 A 21

00101PAL AL 0,110 17 70 A 21

00101UK ZN 0,430 33 70 A 24

00101UKAL AL 0,170 33 70 A 24

00101UKMG MG 0,110 33 70 A 24

R2 ZN 0,400 11 72 B 23

R2AL AL 0,150 11 72 B 23

R2MG MG 0,100 11 72 B 23

03503 ZN 1,050 45 78 D 37

03503AL AL 0,450 45 78 D 37

03503MG MG 0,300 45 78 D 37

00102E ZN 0,450 7,7 90 B 22

00102EMG MG 0,150 7,7 90 B 22

00102 ZN 0,420 17 90 A 20

00102AL AL 0,165 17 90 A 20

00102MG MG 0,105 17 90 A 20

00102P ZN 0,500 20 90 A 21

00102PAL AL 0,260 20 90 A 21

R3 ZN 0,710 13 92 B 23

R3AL AL 0,280 13 92 B 23

R3MG MG 0,180 13 92 B 23

00102UK ZN 1,000 32 98 A 24

00102UK AL AL 0,400 32 98 A 24

00102UKMG MG 0,300 32 98 A 24

00150 ZN 1,960 40 100 C 46

00150AL AL 0,770 40 100 C 46

00150MG MG 0,510 40 100 C 46

00103 ZN 0,680 18 110 A 20

00103AL AL 0,270 18 110 A 20

00103MG MG 0,170 18 110 A 20

00103P ZN 0,900 22 110 A 21

00103PAL AL 0,440 22 110 A 21

00154 ZN 2,000 35 120 C 47

00154MG MG 0,550 35 120 C 47

00155 ZN 1,880 40 120 C 46

00155AL AL 0,740 40 120 C 46

00104 ZN 0,980 21 125 A 20

00104AL AL 0,390 21 125 A 20

00104MG MG 0,250 21 125 A 20

00104P ZN 1,270 26 125 A 21

00104PAL AL 0,500 26 125 A 21

00140 ZN 2,690 38 125 C 45

00140AL AL 1,100 38 125 C 45

00140MG MG 0,751 38 125 C 45

Drawing not exact, for illustrative purposes only

THE TECNOSEAL RANGE

11

THE TECNOSEAL RANGE Disc Anodes

h

Ø

h

ØØ

h

type A

h

type B

CODh Ø



R4 ZN 1,400 15 127 B 23

R4AL AL 0,550 15 127 B 23

R4MG MG 0,350 15 127 B 23

R5 ZN 2,000 23 127 B 23

R5AL AL 0,780 23 127 B 23

R5MG MG 0,500 23 127 B 23

00104E ZN 1,030 9 130 B 22

00104EMG MG 0,270 9 130 B 22

00130 ZN 2,700 30 130 C 45

00130AL AL 1,000 30 130 C 45

00130MG MG 0,680 30 130 C 45

00155-2 ZN 2,800 29 135 C 46

00155-2AL AL 1,200 29 135 C 46

00152 ZN 3,910 47 135 C 47

00152AL AL 1,530 47 135 C 47

00152MG MG 0,980 47 135 C 47

00105 ZN 1,450 30 140 A 20

00105AL AL 0,570 30 140 A 20

00105MG MG 0,360 30 140 A 20

00105P ZN 2,000 33 140 A 21

00105PAL AL 0,780 33 140 A 21

00131 ZN 3,000 35 140 C 45

00131AL AL 1,300 35 140 C 45

00131MG MG 0,830 35 140 C 45

00105UK ZN 2,200 36 140 A 25

00105UK AL AL 0,860 36 140 A 25

00105UKMG MG 0,550 36 140 A 25

00155-1 ZN 4,000 40 145 C 46

00155-1AL AL 1,800 40 145 C 46

00158 ZN 2,800 25 150 C 44

00158AL AL 1,300 25 150 C 44

00158MG MG 0,700 25 150 C 44

00159 ZN 3,200 25 160 C 44

00159AL AL 1,500 25 160 C 44

00159MG MG 0,850 25 160 C 44

R7 ZN 3,900 22 165 B 23

R7AL AL 1,560 22 165 B 23

R7MG MG 1,000 22 165 B 23

00106 ZN 3,800 27 190 A 22

00106AL AL 1,500 27 190 A 22

00106MG MG 1,000 27 190 A 22

00156-1 ZN 5,000 25 200 C 44

00156-1AL AL 2,250 25 200 C 44

00156-2 ZN 6,400 32 200 C 44

00156-2AL AL 2,700 32 200 C 44

00107 ZN 6,200 38 225 C 22

00107AL AL 2,500 38 225 C 22

00107MG MG 1,600 38 225 C 22

00156 ZN 7,000 25 230 C 44

00156AL AL 2,900 25 230 C 44

00156MG MG 1,800 25 230 C 44

00157 ZN 8,300 30 230 C 44

00157AL AL 3,300 30 230 C 44

00157MG MG 2,200 30 230 C 44

00157-1 ZN 9,800 35 230 C 44

00157-1AL AL 3,800 35 230 C 44


THE TECNOSEAL RANGE

12

THE TECNOSEAL RANGE

Ø h h h h h hhØ h h h h h hh

Ø h h h h h hh

type A type B type C type D type E type F type G

Shaft anodes

00500 ZN 0,540 56 19,0 A 102

00500MG MG 0,130 56 19,0 A 102

00500L ZN 0,305 40 19,0 A 107

00500UK ZN 0,750 65 19,0 C 108

00500UKAL AL 0,300 65 19,0 C 108

00500UKMG MG 0,180 65 19,0 C 108

00500USA ZN 0,480 51 19,0 A 110

00500USAAL AL 0,188 51 19,0 A 110

00500USAMG MG 0,120 51 19,0 A 110

00550 ZN 0,315 25 19,0 D 114

00550AL AL 0,123 25 19,0 D 114

00550MG MG 0,066 25 19,0 D 114

00550L ZN 0,260 18 19,0 D 116

00550LAL AL 0,104 18 19,0 D 116

00550LMG MG 0,065 18 19,0 D 116

00550/1 ZN 0,256 25 20,0 D 114

00550/1MG MG 0,080 25 20,0 D 114

00550-1AL AL 0,100 25 20,0 D 114

00501 ZN 0,500 56 22,0 D 102

00501MG MG 0,126 56 22,0 D 102

00501L ZN 0,290 40 22,0 A 107

00501UK ZN 0,710 65 22,0 C 108

00501UKAL AL 0,284 65 22,0 C 108

00501UKMG MG 0,178 65 22,0 C 108

00501USA ZN 0,430 51 22,0 A 110

00501USAAL AL 0,168 51 22,0 A 110

00501USAMG MG 0,108 51 22,0 A 110

00551 ZN 0,240 25 22,0 D 114

00551AL AL 0,120 25 22,0 D 114

00551MG MG 0,080 25 22,0 D 114

00550-1L ZN 0,255 18 22,0 E 116

00550-1LAL AL 0,064 18 22,0 D 116

00550-1LMG MG 0,102 18 22,0 E 116

00502 ZN 0,480 56 25,0 D 102

00502MG MG 0,098 56 25,0 D 102

00502L ZN 0,250 40 25,0 A 107

00502UK ZN 0,690 65 25,0 C 108

00502UKAL AL 0,276 65 25,0 C 108

00502UKMG MG 0,173 65 25,0 C 108

00502USA ZN 0,408 51 25,0 A 110

00502USAAL AL 0,160 51 25,0 A 110

00502USAMG MG 0,103 51 25,0 A 110

00552 ZN 0,228 25 25,0 D 114

00552AL AL 0,090 25 25,0 D 114

00552MG MG 0,070 25 25,0 D 114

00551L ZN 0,250 18 25,0 E 116

00551LAL AL 0,100 18 25,0 E 116


CODh Ø



13

THE TECNOSEAL RANGE


Ø h h h h h hh


Shaft anodes

00551LMG MG 0,063 18 25,0 E 116

00503 ZN 0,480 56 25,4 A 102

00503MG MG 0,120 56 25,4 A 102

00503L ZN 0,240 40 25,4 A 107

00503UK ZN 0,670 65 25,4 C 108

00503UKAL AL 0,268 65 25,4 C 108

00503UKMG MG 0,168 65 25,4 C 108

00503USA ZN 0,400 51 25,4 A 110

00503USAAL AL 0,157 51 25,4 A 110

00503USAMG MG 0,100 51 25,4 A 110

00553 ZN 0,290 25 25,4 D 114

00553AL AL 0,120 25 25,4 D 114

00553MG MG 0,075 25 25,4 D 114

00552L ZN 0,230 18 25,4 E 116

00552LAL AL 0,092 18 25,4 E 116

00552LMG MG 0,058 18 25,4 E 116

00504 ZN 0,435 56 28,0 A 102

00504MG MG 0,110 56 28,0 A 102

00504L ZN 0,218 40 28,0 A 107

00504USA ZN 0,437 56 28,0 A 110

00504USAAL AL 0,110 56 28,0 A 110

00504USAMG MG 0,110 56 28,0 A 110

00553L ZN 0,230 18 28,0 E 116

00553LAL AL 0,092 18 28,0 E 116

00553LMG MG 0,058 18 28,0 E 116

00505UK ZN 0,600 65 28,6 C 108

00505UKAL AL 0,240 65 28,6 C 108

00505UKMG MG 0,150 65 28,6 C 108

00505 ZN 0,445 56 28,6 A 102

00505MG MG 0,350 56 28,6 A 102

00505USA ZN 0,360 51 28,6 A 110

00505USAAL AL 0,137 51 28,6 A 110

00505USAMG MG 0,090 51 28,6 A 110

00554 ZN 0,270 25 28,6 D 115

00554AL AL 0,110 25 28,6 D 115

00554MG MG 0,068 25 28,6 D 115

00554L ZN 0,290 18 28,6 E 116

00554LAL AL 0,116 18 28,6 E 116

00554LMG MG 0,073 18 28,6 E 116

00506 ZN 0,430 56 30,0 A 102

00506MG MG 0,095 56 30,0 A 102

00506UK ZN 0,560 65 30,0 C 108

00506UKAL AL 0,224 65 30,0 C 108

00506UKMG MG 0,013 65 30,0 C 108

00506USA ZN 0,728 67 30,0 A 110

00506USAAL AL 0,285 67 30,0 A 110


CODh Ø



14

THE TECNOSEAL RANGE


Ø h h h h h hh


CODh Ø



Shaft anodes


00506USAMG MG 0,184 67 30,0 A 110

00555 ZN 0,265 25 30,0 D 115

00555AL AL 0,072 25 30,0 D 115

00555MG MG 0,080 25 30,0 D 115

00555L ZN 0,280 18 30,0 E 116

00555LAL AL 0,112 18 30,0 E 116

00555LMG MG 0,070 18 30,0 E 116

00507 ZN 0,415 56 31,8 A 102

00507MG MG 0,092 56 31,8 A 102

00507UK ZN 1,280 65 31,8 C 109

00507UKAL AL 0,512 78 31,8 C 109

00507USA ZN 0,480 64 31,8 A 110

00507USAAL AL 0,190 64 31,8 A 110

00507USAMG MG 0,121 64 31,8 A 110

00556 ZN 0,255 25 31,8 D 115

00556AL AL 0,100 25 31,8 D 115

00556MG MG 0,060 25 31,8 D 115

00556L ZN 0,270 18 31,8 E 116

00556LAL AL 0,108 18 31,8 E 116

00556LMG MG 0,068 18 31,8 E 116

00508 ZN 0,570 66 34,0 A 103

00508MG MG 0,140 66 34,0 A 103

00509 ZN 0,580 66 35,0 A 103

00509MG MG 0,164 66 35,0 A 103

00509UK ZN 1,250 78 35,0 C 109

00509UKAL AL 0,500 78 35,0 C 109

00509USA ZN 0,700 67 35,0 A 111

00509USA/AL AL 0,288 67 35,0 A 111

00509USAMG MG 0,176 67 35,0 A 111

00557 ZN 0,225 25 35,0 D 115

00557AL AL 0,089 25 35,0 D 115

00557MG MG 0,068 25 35,0 D 115

00557L ZN 0,240 18 35,0 E 117

00557LAL AL 0,090 18 35,0 E 117

00557LMG MG 0,060 18 35,0 E 117

00510 ZN 0,520 66 38,0 A 103

00510MG MG 0,130 66 38,0 A 103

00510UK ZN 1,120 78 38,0 C 109

00510UKAL AL 0,448 78 38,0 C 109

00510USA ZN 0,624 67 38,0 A 111

00510USA/AL AL 0,252 67 38,0 A 111

00510USAMG MG 0,157 67 38,0 A 111

00562 ZN 0,210 25 38,0 E 117

00562AL AL 0,080 25 38,0 E 117

00562MG MG 0,050 25 38,0 E 117

00511 ZN 1,000 77 40,0 A 103

15

THE TECNOSEAL RANGE


Ø h h h h h hh


CODh Ø



Shaft anodes


00511MG MG 0,250 77 40,0 A 103

00511UK ZN 1,030 78 40,0 C 109

00511UKAL AL 0,412 78 40,0 C 109

00511USA ZN 1,100 67 40,0 A 111

00511USAAL AL 0,430 67 40,0 A 111

00511USAMG MG 0,150 67 40,0 A 111

00558 ZN 0,450 20 40,0 E 117

00558AL AL 0,180 20 40,0 E 117

00558MG MG 0,120 20 40,0 E 117

00511M ZN 0,880 77 44,4 A 103

00511MMG MG 0,220 77 44,4 A 103

00511MUSA ZN 1,360 78 44,4 A 111

00511MUSAAL AL 0,544 78 44,4 A 111

00511MUSAMG MG 0,340 78 44,4 A 111

00511MUK ZN 0,950 78 44,5 C 109

00511MUKAL AL 0,380 78 44,5 C 109

00512 ZN 0,850 77 45,0 A 103

00512MG MG 0,252 77 45,0 A 103

00512UK ZN 2,440 100 45,0 C 109

00512UKAL AL 0,430 100 45,0 C 109

00512USA ZN 1,100 78 45,0 A 111

00512USAAL AL 0,430 78 45,0 A 111

00512USAMG MG 0,270 78 45,0 A 111

00559 ZN 0,425 20 45,0 E 117

00559AL AL 0,160 20 45,0 E 117

00559MG MG 0,100 20 45,0 E 117

00512M ZN 1,050 77 48,0 A 103

00512MMG MG 0,260 77 48,0 A 103

00512MUSA ZN 1,050 78 48,0 A 111

00512MUSAAL AL 0,400 78 48,0 A 111

00512MUSAMG MG 0,250 78 48,0 A 111

00559/1 ZN 0,390 20 48,0 E 117

00559-1AL AL 0,150 20 48,0 E 117

00559-1MG MG 0,100 20 48,0 E 117

00513 ZN 1,190 88 50,0 A 103

00513MG MG 0,229 88 50,0 A 103

00513UK ZN 2,380 100 50,0 C 109

00513UKAL AL 0,952 100 50,0 C 109

00513USA ZN 1,090 83 50,0 A 111

00513USAAL AL 0,430 83 50,0 A 111

00513USAMG MG 0,270 83 50,0 A 111

00560 ZN 0,610 25 50,0 E 117

00560AL AL 0,024 25 50,0 E 117

00560MG MG 0,150 25 50,0 E 117

00514 ZN 1,160 88 50,8 A 103

16

THE TECNOSEAL RANGE


Ø h h h h h hh


Shaft anodes


00514MG MG 0,292 88 50,8 A 103

00514USA ZN 1,100 83 50,8 A 112

00514USAAL AL 0,431 83 50,8 A 112

00514USAMG MG 0,277 83 50,8 A 112

00515 ZN 1,080 88 55,0 A 104

00515MG MG 0,270 88 55,0 A 104

00561 ZN 1,350 30 55,0 G 118

00516 ZN 1,010 88 57,1 A 104

00516MG MG 0,250 88 57,1 A 104

00516USA ZN 2,820 102 57,1 A 112

00516USAAL AL 1,105 102 57,1 A 112

00563 ZN 1,300 30 57,1 G 118

00516H ZN 3,650 105 57,1 F 120

00516HAL AL 1,450 105 57,1 F 120

00516HMG MG 0,920 105 57,1 F 120

00517 ZN 1,710 110 60,0 A 104

00517MG MG 0,430 110 60,0 A 104

00517USA ZN 2,600 102 60,0 A 112

00517USAAL AL 1,000 102 60,0 A 112

00517USAMG MG 0,650 102 60,0 A 112

00564 ZN 1,260 30 60,0 G 118

00518 ZN 1,680 110 63,5 A 104

00518MG MG 0,420 110 63,5 A 104

00518USA ZN 2,400 102 63,5 A 112

00518USAAL AL 0,940 102 63,5 A 112

00565 ZN 1,170 30 63,5 G 118

00518H ZN 3,200 105 63,5 F 120

00518HAL AL 1,260 105 63,5 F 120

00518HMG MG 0,806 105 63,5 F 120

00519 ZN 1,650 110 65,0 A 104

00519MG MG 0,415 110 65,0 A 104

00566 ZN 1,160 30 65,0 G 118

00520 ZN 2,740 107 70,0 A 105

00520MG MG 0,690 107 70,0 A 105

00520USA ZN 3,200 96 70,0 A 112

00520USAAL AL 1,250 96 70,0 A 112

00567 ZN 1,405 30 70,0 G 118

00521 ZN 2,570 107 75,0 A 105

00521MG MG 0,650 107 75,0 A 105

00568 ZN 1,260 30 75,0 G 118

00521M ZN 2,535 107 76,2 A 105

00521MMG MG 0,640 107 76,2 A 105

00521MUSA ZN 2,700 96 76,2 A 112

CODh Ø



17

THE TECNOSEAL RANGE


Ø h h h h h hh


Shaft anodes


00521MUSAAL AL 1,050 96 76,2 A 112

00522 ZN 2,370 107 80,0 A 105

00522MG MG 0,600 107 80,0 A 105

00569 ZN 1,880 32 80,0 G 118

00523USA ZN 3,540 95 82,6 A 113

00523 ZN 2,100 107 85,0 A 105

00570 ZN 1,720 32 85,0 G 118

00524USA ZN 3,080 95 89,0 A 113

00524-13 ZN 3,650 113 90,0 A 105

00571 ZN 1,560 32 90,0 G 118

00525 ZN 5,700 114 95,0 B 106

00572 ZN 1,400 32 95,0 G 118

00525USA ZN 3,990 95 95,3 A 113

00526 ZN 5,250 114 100,0 B 106

00573 ZN 2,010 32 100,0 E 119

00526USA ZN 3,270 95 101,6 A 113

00526-1 ZN 5,100 114 105,0 B 106

00574 ZN 6,340 40 105,0 E 119

00526-2 ZN 5,000 114 110,0 B 106

00575 ZN 6,600 40 110,0 E 119

00528USA ZN 3,720 95 114,3 A 113

00528 ZN 15,300 156 115,0 B 106

00576 ZN 5,900 40 115,0 E 119

00527 ZN 16,300 156 117,0 B 106

00529 ZN 15,700 156 120,0 B 106

00577 ZN 5,700 40 120,0 E 119

00530 ZN 14,650 156 125,0 B 106

00580 ZN 5,400 40 125,0 E 119

00529USA ZN 4,260 95 127,0 A 113

00531 ZN 12,500 156 130,0 B 106

00580-1 ZN 3,500 40 130,0 E 119

00582 ZN 10,000 60 135,0 E 119

00530USA ZN 4,990 95 140,0 A 113

00583 ZN 4,550 40 140,0 E 119

00583-1 ZN 4,300 40 145,0 E 119

00584 ZN 4,600 40 150,0 E 119

00531USA ZN 5,440 95 152,4 A 113

00586 ZN 4,900 40 155,0 E 119

00587 ZN 5,250 40 160,0 E 119

00532USA ZN 6,350 95 165,0 A 113

00590M ZN 6,240 60 300,0 E 119

00595 ZN 49,400 60 350,0 E 119

00579/1 ZN 19,700 60 360,0 E 119

CODh Ø



18

THE TECNOSEAL RANGE

l

a

Øh

i

type A type B

CODl a h i Ø

steel insertmat. kg (mm) (mm) (mm) (mm) (mm) type page

a

Ø

il

h


TEC-24MG MG 0,080 112 53 19 32 6,5 no A 29

TEC-24 ZN 0,330 112 53 19 32 6,5 no A 29

00209 ZN 0,280 69 50 14 33 6,5 no A 32

00203 ZN 0,300 85 47 20 33 16 no A 29

TEC-20MG MG 0,090 85 46 14 34 7 no A 30

TEC-20 ZN 0,180 85 46 14 34 7 no A 30

00212RIVA ZN 0,220 100 28 12 35 6,5 no A 33

TEC-BTMG MG 0,060 95 28 14 38 6,5 yes A 35

TEC-BTAL AL 0,090 95 28 14 38 6,5 yes A 35

TEC-BT ZN 0,210 95 28 14 38 6,5 yes A 35

TEC-S-Z1 ZN 0,260 97 38 13 38 8 no A 62

00202 ZN 0,460 66 112 19 40 10 no A 28

TEC-21 ZN 0,350 136 58 14 41 8,5 no A 30

TEC-40MG MG 0,250 190 70 13 45 7 no A 63

TEC-40 ZN 1,000 190 70 13 45 7 no A 63

TEC-DOK ZN 0,150 81 32 10 46 6,5 no A 35

00220-0 ZN 0,300 100 44 18 48 10 yes A 37

01804 ZN 0,160 80 54 50 6,5 no A 38

00200 ZN 0,190 93 40 17 50 13 no A 28

00219 ZN 0,230 72 47 10 50 6,5 no A 39

00210 ZN 0,270 64 64 10 50 7 no A 32

00211 ZN 0,280 100 45 9 50 6,8 no A 33

00201 ZN 0,330 117 43 20 50 13 no A 28

01600 ZN 0,190 123 36 10 52 17 no A 41

00204GALE ZN 0,500 210 29 20 52 13 no A 30

00204 ZN 0,530 41 145 23 52 6,3 no A 29

00212 ZN 0,980 110 67 20 57 7,2 no A 33

02524AL AL 0,350 110 63 28 60 25 yes A 60

Plates anode

19

THE TECNOSEAL RANGE

CODl a h i Ø



02524 ZN 0,900 110 63 28 60 25 yes A 60

00205 ZN 0,460 118 34 20 60 6,5 no A 31

00224 ZN 0,900 117 65 30 60 25 yes A 60

00217 ZN 2,700 150 80 40 60 14,5 yes A 60

00239-1 ZN 0,270 110 25 15 62 6 no A 39

00746 ZN 0,275 95 25 20 64,5 12,5 no A 36

TEC-DIVERS-SMG MG 0,430 150 101 13 66 11x45 yes A 50

TEC-DIVERS-SAL AL 0,640 150 101 13 66 11x45 yes A 50

TEC-DIVERS-S ZN 1,100 150 101 13 66 11x45 yes A 50

TEC-ZHC-3 ZN 1,000 159 70 19 67 16x30 yes A 50

00215 ZN 1,060 124 81 20 68 5,5 no A 38

00243AL AL 0,450 147 65 22 70 13x35 yes A 51

00229 ZN 0,560 100 70 12 70 6,5 no A 39

TEC-ZHC-2 ZN 1,080 145 66 19 70 15x25 yes A 50

00243 ZN 1,200 147 65 22 70 13x35 yes A 51

00267-1 ZN 0,920 150 69 17 75 17x25 yes A 40

00267 ZN 1,500 151 69 26 75 13x25 yes A 51

00239 ZN 1,450 190 54 24 76 13 yes A 51

00213MG MG 0,200 130 50 17 77 7 no A 34

00213 ZN 0,680 130 50 17 77 7 no A 34

00220MG MG 0,250 148 58 27 80 11x15 yes A 37

03510AL AL 0,390 152 52/68 23/29 80 11x15 yes A 69

00230MG MG 0,470 210 70 25 80 18X25 yes A 74

00220AL AL 0,550 148 58 27 80 11x15 yes A 37

00230/AL AL 0,820 210 70 25 80 18X25 yes A 74

00220 ZN 1,000 148 58 27 80 11x15 yes A 37

03510 ZN 1,000 152 52/68 23/29 80 11x15 yes A 69

00282AL AL 1,200 200 90 35 80 15 no A 62

00230 ZN 1,850 210 70 25 80 18X25 yes A 74

l

a

Øh

i

type A type B

a

Ø

il

h

Plates anode

20

THE TECNOSEAL RANGE

l

a

Øh

i

type A type B

CODl a h i Ø


a

Ø

il

h


TEC-25MG MG 0,400 232 84 17 97 12,5 no A 63

TEC-Z-404MG MG 0,500 232 83 17 97 12,7 no A 34

TEC-25AL ZN 0,620 232 84 17 97 12,5 no A 63

TEC-25 ZN 1,600 232 84 17 97 12,5 no A 63

TEC-Z-404 ZN 1,600 232 83 17 97 12,7 no A 62

00206 ZN 0,820 175 39 19 100 7 no A 31

00231MG MG 0,950 210 100 30 100 18x25 yes A 52

00262-2MG MG 1,500 200 100 50 100 25x18 yes A 53

00231/AL AL 1,600 210 100 30 100 18x25 yes A 52

00207 ZN 1,740 200 44 40 100 9 no A 31

00262-2AL AL 2,300 200 100 50 100 25x18 yes A 53

00241 ZN 3,400 200 100 25 100 10,5 yes A 59

00262/N ZN 3,600 200 100 30 100 11x5 yes A 52

00231 ZN 3,780 210 100 30 100 18x25 yes A 52

00262-2 ZN 5,850 200 100 50 100 25x18 yes A 53

00235 ZN 2,300 190 65 30 102 13x25 yes A 52

00234 ZN 2,000 180 65 30 104 13x25 yes A 52

00238AL AL 0,900 210 100 33 110 19x25 yes A 54

00269EMG MG 0,450 200 65 32 110 12 yes A 69

00269E/AL AL 0,650 200 65 32 110 12 yes A 69

00269E ZN 1,300 200 65 32 110 12 yes A 69

00236 ZN 2,500 200 80 22 110 13x25 yes A 53

00265 ZN 2,700 205 65 37 110 13x25 yes A 54

00238 ZN 4,250 210 100 33 110 19x25 yes A 54

TEC-ZHC-5 ZN 2,150 200 100 19 111 25X15 yes A 53

00385/1AL AL 0,180 95 34 17 117 7X25 yes B 98

00385/1 ZN 0,250 95 34 17 117 7X25 yes B 98

Plates anode

21

THE TECNOSEAL RANGE

l

a

Øh

i

type A type B

CODl a h i Ø


a

Ø

il

h


TEC-30MG MG 0,256 156 67 16 120 6,7 no A 63

TEC-30AL AL 0,640 156 67 16 120 6,7 no A 63

TEC-30 ZN 0,970 156 67 16 120 6,7 no A 63

01950 ZN 1,000 101 64 30 120 9X15 yes B 97

00260-1 ZN 1,620 190 50 25 120 14 no A 40

00237 ZN 4,380 220 100 30 120 10,5 yes A 59

00255AL AL 3,140 300 150 26 125 16 yes A 59

00255 ZN 8,000 300 150 26 125 16 yes A 59

TEC-Z-406MG MG 0,800 221 107 27 127 12,5 yes A 62

TEC-Z-406 ZN 3,000 221 107 27 127 12,5 yes A 62

00266-1 ZN 3,000 217 110 24 130 13X25 yes A 61

00266 ZN 3,900 217 110 31 130 13X25 yes A 61

00386MG MG 0,200 95 40 25 132 9X20 yes B 97

00386AL AL 0,300 95 40 25 132 9X20 yes B 97

00386 ZN 0,500 95 40 25 132 9X20 yes B 97

00385MG MG 0,135 75 34 16 135 9X20 yes B 97

00385AL AL 0,180 75 34 16 135 9X20 yes B 97

00385 ZN 0,250 75 34 16 135 9X20 yes B 97

00386/1AL AL 0,300 110 42 24 135 9X20 yes B 98

00386/1 ZN 0,500 110 42 24 135 9X20 yes B 98

00221MG MG 0,580 247 63 30 140 13x25 yes A 68

00221AL AL 0,900 247 63 30 140 13x25 yes A 68

03511AL AL 0,940 250 55/75 21/37 140 11x15 yes A 69

TEC-DIVERS-MG MG 1,250 305 152 13 140 13x102 yes A 55

TEC-DIVERS-AL AL 1,500 305 152 13 140 13x102 yes A 55

TEC-DIVERSH-MG MG 2,000 305 152 25 140 13x102 yes A 55

00221 ZN 2,300 247 63 30 140 13x25 yes A 68

03511 ZN 2,400 250 55/75 21/37 140 11x15 yes A 69

TEC-DIVERSH-AL AL 3,000 305 152 25 140 13x102 yes A 55

TEC-DIVERS ZN 3,500 305 152 13 140 13x102 yes A 55

Plates anode

22

THE TECNOSEAL RANGE

l

a

Øh

i

type A type B

a

Ø

il

h


CODl a h i Ø


TEC-DIVERSH ZN 6,600 305 152 25 140 13x102 yes A 55

00260-2 ZN 1,000 190 30 25 150 10 no A 40

00672 ZN 1,200 300 47 12,5 150 20 no A 75

00280 ZN 4,500 268 120 30 150 14 no A 62

00255-6 ZN 8,125 300 150 26 152 10,5 yes A 59

00214MG MG 0,610 217 60 30 160 8 no A 34

00270EMG MG 0,700 320 65 33 160 12x65 yes A 69

00270EAL AL 1,000 320 65 33 160 12x65 yes A 69

NACA04AL AL 1,700 400 84 42 160 13x25 yes A 72

00266E ZN 10,000 290 208 28 160 13X25 yes A 61

00263/N ZN 11,500 300 150 40 160 17x25 yes A 56

00264N ZN 14,000 300 150 50 160 17x25 yes A 56

00270E ZN 2,200 320 65 33 160 12x65 yes A 69

00214 ZN 2,400 217 60 30 160 8 no A 34

00265N ZN 20,000 300 200 55 160 22x26 yes A 56

NACA08AL AL 3,200 510 106 53 160 17x25 yes A 72

NACA04 ZN 4,000 400 84 42 160 13x25 yes A 72

00242 ZN 4,200 280 85 30 160 13x25 yes A 56

00244 ZN 5,100 290 90 36 160 22x30 yes A 55

00264-1 ZN 6,000 300 150 20 160 17x25 yes A 56

00264-3 ZN 7,000 300 150 25 160 17x25 yes A 56

00264 ZN 8,000 300 150 28 160 17x25 yes A 56

NACA08 ZN 8,000 510 106 53 160 17x25 yes A 72

00279EAL AL 8,500 490 120 60 160 22x30 yes A 73

00387MG MG 0,500 120 46 35 180 13X25 yes B 97

00387-1AL AL 0,600 127 62 28 180 13X25 yes B 98

00387AL AL 0,650 120 46 35 180 13X25 yes B 97

00388MG MG 0,700 140 82 26 180 13X25 yes B 98

Plates anode

23

THE TECNOSEAL RANGE

l

a

Øh

i

type A type B

a

Ø

il

h


CODl a h i Ø


00387/1 ZN 1,000 127 62 28 180 13X25 yes B 98

00388AL AL 1,000 140 82 26 180 13X25 yes B 98

00387 ZN 1,100 120 46 35 180 13X25 yes B 97

00388 ZN 2,000 140 82 26 180 13X25 yes B 98

00226 ZN 3,400 250 67 35 180 13x25 yes A 57

00225 ZN 5,000 322 83 30 180 13x25 yes A 57

00245 ZN 7,000 308 85 46 180 13x25 yes A 57

00279E-1AL AL 9,000 400 145 60 180 18 yes A 73

00350BMG MG 0,250 120 78 25 200 13x25 yes B 96

00350BAL AL 0,390 120 78 25 200 13x25 yes B 96

00300AAL AL 0,455 100 60 18 200 13x25 yes B 95

00301AAL AL 0,550 110 63 26 200 13x25 yes B 95

00300A ZN 0,600 100 60 18 200 13x25 yes B 95

00222MG MG 0,680 290 53 33 200 13x25 yes A 68

00351-1MG MG 0,700 135 87 35 200 13x25 yes B 96

00351-2-BMG MG 0,800 140 90 42 200 13x25 yes B 96

00351-1AL AL 0,860 135 87 35 200 13x25 yes B 96

00301A ZN 1,000 110 63 26 200 13x25 yes B 95

00350/B ZN 1,000 120 78 25 200 13x25 yes B 96

00351-2-BAL AL 1,000 140 90 42 200 13x25 yes B 96

00352AMG MG 1,000 160 100 40 200 13x25 yes B 96

00222AL AL 1,060 290 53 33 200 13x25 yes A 68

00223MG MG 1,130 350 68 36 200 13x25 yes A 68

00223-1MG MG 1,260 325 78 35 200 11 yes A 58

00352/A-AL AL 1,300 160 100 40 200 13x25 yes B 96

00223AL AL 1,760 350 68 36 200 13x25 yes A 68

00351/1 ZN 1,800 135 87 35 200 13x25 yes B 96

00223-1AL AL 1,960 325 78 35 200 11 yes A 58

00223FAL AL 2,000 282 108 35 200 19x25 yes A 58

00351/2/B ZN 2,100 140 90 42 200 13x25 yes B 96

Plates anode

24

THE TECNOSEAL RANGE

l

a

Øh

i

type A type B

a

Ø

il

h


CODl a h i Ø


00222 ZN 2,700 290 53 33 200 13x25 yes A 68

00352/A ZN 3,100 160 100 40 200 13x25 yes B 96

00223 ZN 4,500 350 68 36 200 13x25 yes A 68

00223/1 ZN 5,000 325 78 35 200 11 yes A 58

00223F ZN 5,500 282 108 35 200 19x25 yes A 58

00271E/MG MG 1,010 310 75 40 205 12x25 yes A 70

00271EAL AL 1,570 310 75 40 205 12x25 yes A 70

00271E ZN 4,000 310 75 40 205 12x25 yes A 70

00248 ZN 12,090 220 315 50 210 50 no A 64

00352-A1AL AL 1,300 160 100 40 220 13x25 yes B 96

00352-A1 ZN 3,100 160 100 40 220 13x25 yes B 96

00274EAL AL 3,000 450 100 30 230 12x43 yes A 71

00303MAL AL 1,000 210 70 28 230 13x25 yes B 95

00272EMG MG 1,760 455 94 40 230 19x30 yes A 70

00273E ZN 11,000 460 100 45 230 19x30 yes A 70

00276E ZN 12,000 455 100 40 230 22x30 yes A 73

00277E ZN 14,000 455 100 47 230 22x30 yes A 73

00303M ZN 2,200 210 70 28 230 13x25 yes B 95

00273EAL AL 2,240 460 100 45 230 19x30 yes A 70

00275EMG MG 2,270 455 105 35 230 22x30 yes A 73

00273EMG MG 2,720 460 100 45 230 19x30 yes A 70

00272EAL AL 2,750 455 94 40 230 19x30 yes A 70

00276EMG MG 3,030 455 100 40 230 22x30 yes A 73

NACA08-230AL AL 3,200 510 106 53 230 17x25 yes A 72

00275EAL AL 3,530 455 105 35 230 22x30 yes A 73

00277EMG MG 3,530 455 100 47 230 22x30 yes A 73

00277EAL AL 4,490 455 100 47 230 22x30 yes A 73

00276EAL AL 4,710 455 100 40 230 22x30 yes A 73

00272E ZN 7,000 455 94 40 230 19x30 yes A 70

Plates anode

25

THE TECNOSEAL RANGE

l

a

Øh

i

type A type B

a

Ø

il

h


CODl a h i Ø


00274E ZN 7,200 450 100 30 230 12x43 yes A 71

NACA08-230 ZN 8,000 510 106 53 230 17x25 yes A 72

00275E ZN 9,000 455 105 35 230 22x30 yes A 73

00680 MG 3,550 505 81 50 240 14,5 yes A 76

00681 MG 7,900 590 120 60 240 14,5 yes A 76

00302A-AL AL 0,800 200 70 25 250 13x25 yes B 95

00303ferrettiAL AL 1,000 210 70 28 250 13x25 yes B 95

00304AAL AL 1,500 200 90 35 250 13x25 yes B 95

00302A ZN 1,800 200 70 25 250 13x25 yes B 95

00303ferretti ZN 2,200 210 70 28 250 13x25 yes B 95

00304A ZN 3,000 200 90 35 250 13x25 yes B 90

00233 ZN 7,000 400 80 30 250 10,5 yes A 59

00389-3AL AL 1,300 220 96 30 260 13X30 yes B 98

00389-1AL AL 1,600 220 95 32 260 13X30 yes B 98

00389-3 ZN 3,000 220 96 30 260 13X30 yes B 98

00389-1 ZN 3,600 220 95 32 260 13X30 yes B 98

00278EAL AL 10,980 600 125 35 300 22x30 yes A 73

00278E ZN 28,000 600 125 35 300 22x30 yes A 73

00278EMG MG 7,060 600 125 35 300 22x30 yes A 73

00389-2AL AL 1,500 215 90 30 315 12X20 yes B 98

00389-4AL AL 2,500 260 113 33 315 12X20 yes B 98

00389-2 ZN 3,400 215 90 30 315 12X20 yes B 98

00389-4 ZN 5,500 260 113 33 315 12X20 yes B 98

00306-2AL AL 2,500 300 80 40 350 12x30 yes B 95

00306/2 ZN 5,000 300 80 40 350 12x30 yes B 95

Plates anode

26

THE TECNOSEAL RANGE

type D

l

a

h h

a

l

a

h

l

a

l

h h

a

l

type A

l

a

h h

a

l

a

h

l

a

l

h h

a

l

type B

l

a

h h

a

l

a

h

l

a

l

h h

a

l

type E

l

a

h h

a

l

a

h

l

a

l

h h

a

l

type C

l

a

h h

a

l

a

h

l

a

l

h h

a

l

CODl a h

insertmat. kg (mm) (mm) (mm) type page

00300EAL AL 0,200 120 40 22,5 210x14x3 B 92

00301EAL AL 0,390 160 57 25 250x25x5 B 92

00300AL AL 0,455 100 60 18 200x25x5 A 90

00301AL AL 0,550 110 63 26 200x25x5 A 90

00350AL AL 0,600 120 78 25 230x25x5 C 92

00380AL AL 0,700 190 50 26 300x25x5 D 93

00302EAL AL 0,780 225 70 31 300x25x6 B 92

00302AL AL 0,800 200 70 25 300x25x5 A 90

00351AL AL 0,860 135 87 35 250x25x5 C 92

Z4-ALAL AL 0,940 149 88 28 250x25x5 E 93

00303EAL AL 0,980 225 80 35 300x25x5 B 92

00303AL AL 1,000 210 70 28 300x25x5 A 90

00352AL AL 1,200 160 100 40 250x25x5 C 92

00304EAL AL 1,250 250 90 35 400x30x6 B 92

00381AL AL 1,300 200 60 32 300x25x5 D 93

Weld on anodes


27

THE TECNOSEAL RANGE

type D

l

a

h h

a

l

a

h

l

a

l

h h

a

l

type A

l

a

h h

a

l

a

h

l

a

l

h h

a

l

type B

l

a

h h

a

l

a

h

l

a

l

h h

a

l

type E

l

a

h h

a

l

a

h

l

a

l

h h

a

l

type C

l

a

h h

a

l

a

h

l

a

l

h h

a

l

CODl a h


00304AL AL 1,500 200 90 33 300x25x5 A 90

00304-1AL AL 1,650 200 90 40 300x25x5 A 90

00305AL AL 1,800 240 90 36 340x25x5 A 90

00306EAL AL 1,960 250 90 50 400x30x6 A 92

00353AL AL 2,000 220 140 40 340x25x5 C 92

00306AL AL 2,500 300 80 40 400x30x6 A 91

00307AL AL 3,000 295 90 40 400x30x6 A 91

00307-2AL AL 3,200 220 100 46 350x40x8 A 91

00308AL AL 3,500 295 125 38 400x30x6 A 91

00383AL AL 3,500 310 140 30 400x30x6 D 93

00308-5AL AL 3,800 320 147 35 400x30x6 A 91

00360AL AL 4,000 280 170 50 400x30x6 C 92

00309AL AL 4,500 320 147 38 400x30x6 A 91

00383-1AL AL 4,500 310 140 35 400x30x6 D 93

00310AL AL 5,500 400 152 33 550x40x6 A 91

Weld on anodes


28

THE TECNOSEAL RANGE

type D

l

a

h h

a

l

a

h

l

a

l

h h

a

l

type A

l

a

h h

a

l

a

h

l

a

l

h h

a

l

type B

l

a

h h

a

l

a

h

l

a

l

h h

a

l

type E

l

a

h h

a

l

a

h

l

a

l

h h

a

l

type C

l

a

h h

a

l

a

h

l

a

l

h h

a

l

CODl a h


00300E ZN 0,500 120 40 22,5 210x14x3 B 92

00300 ZN 0,650 100 60 18 200x25x5 A 90

00301 ZN 1,000 110 63 26 200x25x5 A 90

00301E ZN 1,000 160 57 25 250x25x5 B 92

00350 ZN 1,000 120 78 25 230x25x5 C 92

00380 ZN 1,700 190 50 26 300x25x5 D 93

00302 ZN 1,800 200 70 25 300x25x5 A 90

00351 ZN 1,800 135 87 35 250x25x5 C 92

00302E ZN 2,000 225 70 31 300x25x6 B 92

00303 ZN 2,200 210 70 28 300x25x5 A 90

Z4-ZNAL ZN 2,250 149 88 28 250x25x5 E 93

00303E ZN 2,500 225 80 35 300x25x5 B 92

00304 ZN 3,000 200 90 33 300x25x5 A 90

00352 ZN 3,100 160 100 40 250x25x5 C 92

00304E ZN 3,200 250 90 35 400x30x6 B 92

00381 ZN 3,300 200 60 32 300x25x5 D 93

00304-1 ZN 3,500 200 90 40 300x25x5 A 90

00305 ZN 4,000 240 90 36 340x25x5 A 90

00306 ZN 5,000 300 80 40 400x30x6 A 91

00306E ZN 5,000 250 90 50 400x30x6 B 92

00353 ZN 5,000 220 140 40 340x25x5 C 92

Weld on anodes


29

THE TECNOSEAL RANGE

type D

l

a

h h

a

l

a

h

l

a

l

h h

a

l

type A

l

a

h h

a

l

a

h

l

a

l

h h

a

l

type B

l

a

h h

a

l

a

h

l

a

l

h h

a

l

type E

l

a

h h

a

l

a

h

l

a

l

h h

a

l

type C

l

a

h h

a

l

a

h

l

a

l

h h

a

l

CODl a h


00307 ZN 5,600 295 90 40 400x30x6 A 91

00307-2 ZN 6,000 220 100 46 350x40x8 A 91

00308 ZN 7,800 295 125 38 400x30x6 A 91

00383 ZN 8,000 310 140 30 400x30x6 D 93

00308-5 ZN 8,500 320 147 35 400x30x6 A 91

00309 ZN 10,000 320 147 38 400x30x6 A 91

00360 ZN 10,000 280 170 50 400x30x6 C 92

00383-1 ZN 10,000 310 140 35 400x30x6 D 93

00310 ZN 12,000 400 152 33 550x40x6 A 91

00350MG MG 0,300 120 78 25 230x25x5 C 92

00301MG MG 0,450 110 63 26 200x25x5 A 90

Z4-MGAL MG 0,630 149 88 28 250x25x5 E 93

00302MG MG 0,700 200 70 25 300x25x5 A 90

00351MG MG 0,700 135 87 35 250x25x5 C 92

00352MG MG 0,800 160 100 40 250x25x5 C 92

00306MG MG 1,500 300 80 40 400x30x6 A 91

00307MG MG 1,800 220 100 46 350x40x8 A 91

00309MG MG 2,500 320 147 38 400x30x6 A 91

00310MG MG 4,000 400 152 33 550x40x6 A 91

Weld on anodes


30

THE TECNOSEAL RANGE

type A

l

a

h h

a

l

a

h

l

a

l

h h

a

l

l

a

h h

a

l

a

h

l

a

l

h h

a

l

Large commercial anodes


The strap can be providedwith slots upon request

CODl a h

insertmat. kg (mm) (mm) (mm) type

S4910-130ZN ZN 13,0 490 100 45 580X30X10 A

S4910-140ZN ZN 14,0 490 100 50 580X30X10 A

S4910-150ZN ZN 15,0 490 100 55 580X30X10 A

S4910-160ZN ZN 16,0 490 100 60 580X30X10 A

S5513-180ZN ZN 18,0 550 130 46 700X50X6 A

S5513-200ZN ZN 20,0 550 130 50 700X50X6 A

S5513-220ZN ZN 22,0 550 130 54 700X50X6 A

S5513-240ZN ZN 24,0 550 130 58 700X50X6 A

S5513-260ZN ZN 26,0 550 130 62 700X50X6 A

S5513-280ZN ZN 28,0 550 130 66 700X50X6 A

S5513-300ZN ZN 30,0 550 130 70 700X50X6 A

S5513-320ZN ZN 32,0 550 130 74 700X50X6 A

S5513-340ZN ZN 34,0 550 130 78 700X50X6 A

S5513-350ZN ZN 35,0 550 130 80 700X50X6 A

S9213-400ZN ZN 40,0 920 130 55 1100X50X6 A

S9213-450ZN ZN 45,0 920 130 60 1100X50X6 A

S9213-500ZN ZN 50,0 920 130 65 1100X50X6 A

S9213-550ZN ZN 55,0 920 130 70 1100X50X6 A

S9213-650ZN ZN 65,0 920 130 80 1100X50X6 A

S9213-750ZN ZN 75,0 920 130 90 1100X50X6 A

31

THE TECNOSEAL RANGE

type A

l

a

h h

a

l

a

h

l

a

l

h h

a

l

l

a

h h

a

l

a

h

l

a

l

h h

a

l


The strap can be providedwith slots upon request


CODl a h

insertmat. kg (mm) (mm) (mm) type

S4910-055ZN AL 5,5 490 100 47 580X30X10 A

S4910-060ZN AL 6,0 490 100 55 580X30X10 A

S4910-065ZN AL 6,5 490 100 60 580X30X10 A

S5513-070ZN AL 7,0 550 130 45 700X50X6 A

S5513-075ZN AL 7,5 550 130 48 700X50X6 A

S5513-080ZN AL 8,0 550 130 50 700X50X6 A

S5513-090ZN AL 9,0 550 130 55 700X50X6 A

S5513-100ZN AL 10,0 550 130 60 700X50X6 A

S5513-110ZN AL 11,0 550 130 65 700X50X6 A

S5513-120ZN AL 12,0 550 130 70 700X50X6 A

S5513-130ZN AL 13,0 550 130 75 700X50X6 A

S5513-140ZN AL 14,0 550 130 80 700X50X6 A

S9213-160ZN AL 16,0 920 130 55 1100X50X6 A

S9213-180ZN AL 18,0 920 130 60 1100X50X6 A

S9213-200ZN AL 20,0 920 130 65 1100X50X6 A

S9213-220ZN AL 22,0 920 130 70 1100X50X6 A

S9213-240ZN AL 24,0 920 130 75 1100X50X6 A

S9213-260ZN AL 26,0 920 130 80 1100X50X6 A

S9213-280ZN AL 28,0 920 130 85 1100X50X6 A

S9213-300ZN AL 30,0 920 130 90 1100X50X6 A

Large commercial anodes

32

THE TECNOSEAL RANGE

type 1

type 2

type 5

type 4type 3

type 6

type 7 type 8

type 6

Ø

l b

c

a

Ø

l b

c

aØ

l b

c

a

Ø

l b

c

a

Ø

l b

c

a

Ø

l b

c

a

Ø

l b

c

a


Please specify the installation type with the order.

CODa b c ø l

mat. kg (mm) (mm) (mm) (mm) (mm)

C6665-085ZN ZN 8,5 260 65 66 16 720

C4550-100ZN ZN 10,0 590 45 50 16 1050

C4550-120ZN ZN 12,0 708 45 50 16 1168

C4550-140ZN ZN 14,0 826 45 50 16 1286

C5575-160ZN ZN 16,0 520 55 75 16 980

C5575-180ZN ZN 18,0 585 55 75 16 1045

C5575-200ZN ZN 20,0 650 55 75 16 1110

C5575-220ZN ZN 22,0 715 55 75 16 1175

C83105-300ZN ZN 30,0 474 83 105 16 934

C83105-400ZN ZN 40,0 632 83 105 16 1092

C83105-500ZN ZN 50,0 790 83 105 16 1250

C83105-650ZN ZN 65,0 1027 83 105 16 1487

C100145-700ZN ZN 70,0 665 100 145 16 1125

C100145-850ZN ZN 85,0 808 100 145 16 1268

C100145-1100ZN ZN 110,0 1045 100 145 16 1505

C100145-1350ZN ZN 135,0 1283 100 145 16 1743

Tank anodes

33

THE TECNOSEAL RANGE

type 1

type 2

type 5

type 4type 3

type 6

type 7 type 8

type 6

Ø

l b

c

a

Ø

l b

c

aØ

l b

c

a

Ø

l b

c

a

Ø

l b

c

a

Ø

l b

c

a

Ø

l b

c

a

Please specify the installation type with the order.


CODa b c ø l

mat. kg (mm) (mm) (mm) (mm) (mm)

C6665-040ZN AL 4,0 260 65 66 16 720

C4550-050ZN AL 5,0 600 45 50 16 1060

C4550-060ZN AL 6,0 720 45 50 16 1180

C4550-070ZN AL 7,0 840 45 50 16 1300

C5575-080ZN AL 8,0 592 55 75 16 1052

C5575-090ZN AL 9,0 666 55 75 16 1126

C5575-100ZN AL 10,0 740 55 75 16 1200

C83105-140ZN AL 14,0 539 83 105 16 999

C83105-160ZN AL 16,0 616 83 105 16 1076

C83105-180ZN AL 18,0 693 83 105 16 1153

C83105-220ZN AL 22,0 847 83 105 16 1307

C83105-240ZN AL 24,0 924 83 105 16 1384

C83105-260ZN AL 26,0 1000 83 105 16 1460

C100145-300ZN AL 30,0 705 100 145 16 1165

C100145-400ZN AL 40,0 940 100 145 16 1400

C100145-500ZN AL 50,0 1175 100 145 16 1635

Tank anodes

34

THE TECNOSEAL RANGE

l l1

Ø b

l l1

m

Ø

Ø

Ø

Ø

Ø

Ø

Ø

b

b

b

b

b

ANODO TIPO 1

ANODO TIPO 2

ANODO TIPO 3

ll1

m

l

ANODO TIPO 4

ANODO TIPO 6

l1

l

l

ANODO TIPO 5

ANODO TIPO 7

ANODO TIPO 8

l l1

l

Ø b

l l1

m

l l1

Ø b

l l1

m

Ø

Ø

Ø

Ø

Ø

Ø

Ø

b

b

b

b

b

ANODO TIPO 1

ANODO TIPO 2

ANODO TIPO 3

ll1

m

l

ANODO TIPO 4

ANODO TIPO 6

l1

l

l

ANODO TIPO 5

ANODO TIPO 7

ANODO TIPO 8

l l1

l

T1 T2 T3 T4 T5

T6 T7 T9T8

l l1

Ø b

l l1

m

Ø

Ø

Ø

Ø

Ø

Ø

Ø

b

b

b

b

b

ANODO TIPO 1

ANODO TIPO 2

ANODO TIPO 3

ll1

m

l

ANODO TIPO 4

ANODO TIPO 6

l1

l

l

ANODO TIPO 5

ANODO TIPO 7

ANODO TIPO 8

l l1

l

l l1

Ø b

l l1

m

Ø

Ø

Ø

Ø

Ø

Ø

Ø

b

b

b

b

b

ANODO TIPO 1

ANODO TIPO 2

ANODO TIPO 3

ll1

m

l

ANODO TIPO 4

ANODO TIPO 6

l1

l

l

ANODO TIPO 5

ANODO TIPO 7

ANODO TIPO 8

l l1

l

l l1

Ø b

l l1

m

Ø

Ø

Ø

Ø

Ø

Ø

Ø

b

b

b

b

b

ANODO TIPO 1

ANODO TIPO 2

ANODO TIPO 3

ll1

m

l

ANODO TIPO 4

ANODO TIPO 6

l1

l

l

ANODO TIPO 5

ANODO TIPO 7

ANODO TIPO 8

l l1

l

l l1

Ø b

l l1

m

Ø

Ø

Ø

Ø

Ø

Ø

Ø

b

b

b

b

b

ANODO TIPO 1

ANODO TIPO 2

ANODO TIPO 3

ll1

m

l

ANODO TIPO 4

ANODO TIPO 6

l1

l

l

ANODO TIPO 5

ANODO TIPO 7

ANODO TIPO 8

l l1

l

l l1

Ø b

l l1

m

Ø

Ø

Ø

Ø

Ø

Ø

Ø

b

b

b

b

b

ANODO TIPO 1

ANODO TIPO 2

ANODO TIPO 3

ll1

m

l

ANODO TIPO 4

ANODO TIPO 6

l1

l

l

ANODO TIPO 5

ANODO TIPO 7

ANODO TIPO 8

l l1

l

l l1

Ø b

l l1

m

Ø

Ø

Ø

Ø

Ø

Ø

Ø

b

b

b

b

b

ANODO TIPO 1

ANODO TIPO 2

ANODO TIPO 3

ll1

m

l

ANODO TIPO 4

ANODO TIPO 6

l1

l

l

ANODO TIPO 5

ANODO TIPO 7

ANODO TIPO 8

l l1

l

Pencil anodes / zinc only

CODØ l l1 b

(mm) (mm) (mm) (mm) brand type page

TEC-E00A-Z 6,4 13 8 1/4’’UNC USA TYPE T1 394

TEC-E00-Z 6,4 51 8 1/4’’UNC USA TYPE T1 394

02021/1 9 35 10 n/a Caterpillar T1 377

02013 9,5 18 8 7 Aifo -Fpt - Iveco T2 374

TEC-E0B-Z 9,5 19 10 5/16’’UNC USA TYPE T1 394

TEC-E0C-Z 9,5 38 10 1/4’’UNC USA TYPE T1 394


TEC-E1H-Z 9,5 51 12 3/8’’UNC USA TYPE T1 394

TEC-E0A-Z 9,5 64 10 5/16’’UNC USA TYPE T1 394

20011 9,5 51 10 3/8’’UNC UK TYPE T1 393

20019 9,5 76 10 3/8’’UNC UK TYPE T1 393

20012 9,5 102 10 3/8’’UNC UK TYPE T1 393

02100 10 17 9 8 Nanni Diesel T2 384

02053 10 18 8 8,5 Bukh T2 376

02070 10 18 8 8,5 Ford T2 380

02351 10 18 8 8,5 Lombardini T2 383

02042 10 20 8 M6 Cummins T1 379

02030 10 30 6 8 Onan T2 385

02130 10 30 10 M8 Man Diesel T1 383

02070/A 10 30 n/a n/a Ford T1 380

02029bis 10 38 10 1/4’’UNC Caterpillar T1 377

02021 10 55 10 1/4’’UNC Caterpillar T1 377

02032 11 31 9 M8 Onan T1 385

01318 12 30 10 3/8’’UNC Yanmar T1 391

02045-1 12 30 10 3/8’’UNC Cummins T1 379

02050 12 35 9 M5 Bukh T1 376


02033 12 40 10 3/8’’UNC Onan T1 385

02052 12 40 10 3/8’’UNC Bukh T1 376

02003 12 41 10 3/8’’UNC General Motors T1 381

02029 12,7 38 10 7/16’’UNF Caterpillar T1 377

02045 12,7 50 12 3/8’’UNC Cummins T1 379

20002 12,7 19 8 12-28 UNF Galvion Elements T1 396

TEC-E1G-Z 12,7 25 12 3/8’’UNC USA TYPE T1 394

TEC-E1F-Z 12,7 31 12 3/8’’UNC USA TYPE T1 394

01321 12,7 38 10 3/8’’UNC Yanmar T1 391

35

THE TECNOSEAL RANGE

l l1

Ø b

l l1

m

Ø

Ø

Ø

Ø

Ø

Ø

Ø

b

b

b

b

b

ANODO TIPO 1

ANODO TIPO 2

ANODO TIPO 3

ll1

m

l

ANODO TIPO 4

ANODO TIPO 6

l1

l

l

ANODO TIPO 5

ANODO TIPO 7

ANODO TIPO 8

l l1

l

Ø b

l l1

m

l l1

Ø b

l l1

m

Ø

Ø

Ø

Ø

Ø

Ø

Ø

b

b

b

b

b

ANODO TIPO 1

ANODO TIPO 2

ANODO TIPO 3

ll1

m

l

ANODO TIPO 4

ANODO TIPO 6

l1

l

l

ANODO TIPO 5

ANODO TIPO 7

ANODO TIPO 8

l l1

l

T1 T2 T3 T4 T5

T6 T7 T9T8

l l1

Ø b

l l1

m

Ø

Ø

Ø

Ø

Ø

Ø

Ø

b

b

b

b

b

ANODO TIPO 1

ANODO TIPO 2

ANODO TIPO 3

ll1

m

l

ANODO TIPO 4

ANODO TIPO 6

l1

l

l

ANODO TIPO 5

ANODO TIPO 7

ANODO TIPO 8

l l1

l

l l1

Ø b

l l1

m

Ø

Ø

Ø

Ø

Ø

Ø

Ø

b

b

b

b

b

ANODO TIPO 1

ANODO TIPO 2

ANODO TIPO 3

ll1

m

l

ANODO TIPO 4

ANODO TIPO 6

l1

l

l

ANODO TIPO 5

ANODO TIPO 7

ANODO TIPO 8

l l1

l

l l1

Ø b

l l1

m

Ø

Ø

Ø

Ø

Ø

Ø

Ø

b

b

b

b

b

ANODO TIPO 1

ANODO TIPO 2

ANODO TIPO 3

ll1

m

l

ANODO TIPO 4

ANODO TIPO 6

l1

l

l

ANODO TIPO 5

ANODO TIPO 7

ANODO TIPO 8

l l1

l

l l1

Ø b

l l1

m

Ø

Ø

Ø

Ø

Ø

Ø

Ø

b

b

b

b

b

ANODO TIPO 1

ANODO TIPO 2

ANODO TIPO 3

ll1

m

l

ANODO TIPO 4

ANODO TIPO 6

l1

l

l

ANODO TIPO 5

ANODO TIPO 7

ANODO TIPO 8

l l1

l

l l1

Ø b

l l1

m

Ø

Ø

Ø

Ø

Ø

Ø

Ø

b

b

b

b

b

ANODO TIPO 1

ANODO TIPO 2

ANODO TIPO 3

ll1

m

l

ANODO TIPO 4

ANODO TIPO 6

l1

l

l

ANODO TIPO 5

ANODO TIPO 7

ANODO TIPO 8

l l1

l

l l1

Ø b

l l1

m

Ø

Ø

Ø

Ø

Ø

Ø

Ø

b

b

b

b

b

ANODO TIPO 1

ANODO TIPO 2

ANODO TIPO 3

ll1

m

l

ANODO TIPO 4

ANODO TIPO 6

l1

l

l

ANODO TIPO 5

ANODO TIPO 7

ANODO TIPO 8

l l1

l


CODØ l l1 b


TEC-E1E-Z 12,7 38 12 3/8’’UNC USA TYPE T1 394

TEC-E1D-Z 12,7 44 12 3/8’’UNC USA TYPE T1 394

20013 12,7 51 10 3/8’’UNC UK TYPE T1 393


20014 12,7 102 10 3/8’’UNC UK TYPE T1 393

20015 12,7 152 10 3/8’’UNC UK TYPE T1 393

02031 13 26 5 9,5 Onan T1 385

02010/99 13 26 8 10 Aifo -Fpt - Iveco T2 374

02012 13 26 8 10 Aifo -Fpt - Iveco T2 374

01005 13 50 13 3/8’’UNC BMW T1 375

02061 14 20 10 M8 VM T1 387

02081 14 20 10 M8 Isotta Fraschini T1 382

02101 14 26 8 10 Nanni Diesel T2 384

02010 14 26 9 12 Aifo -Fpt - Iveco T2 374

02020 14 26 9 12 Caterpillar T2 377

02071 14 26 8 12 Ford T2 380

02350 14 26 8 12 Lombardini T2 383

02940 14 30 8 M8 Steyr Motor T1 387


02035 14 35 10 M8 Cursor T1 380

02060 14 40 13 7/16’’UNC VM T2 387

02017 14 40 10 M8 Aifo -Fpt - Iveco T2 374

02029-1 14 50 10 7/16’’UNF Caterpillar T1 377

02064 14,5 36 20 M8 VM T3 387

01320 15 20 10 M8 Yanmar T1 391

02090 15 22 10 12 Renault Marine Couach T2 385

02353 15 30 8 10 Lombardini T2 383

00714 15,5 30 10 7/16’’UNC Volvo Penta T9 388

00714AL 15,5 30 10 7/16’’UNC Volvo Penta T1 388

00714-1 15,5 30 n/a n/a Volvo Penta T5 388

00714-1AL 15,5 30 n/a n/a Volvo Penta T5 388


00713 15,5 40 10 7/16’’UNC Volvo Penta T1 388

00713MG 15,5 40 10 7/16’’UNC Volvo Penta T1 388

02044 15,5 50 9 7/16’’UNF Cummins T1 379

00715 16 13 10 5/16’’UNC Volvo Penta T1 388

36

THE TECNOSEAL RANGE

l l1

Ø b

l l1

m

Ø

Ø

Ø

Ø

Ø

Ø

Ø

b

b

b

b

b

ANODO TIPO 1

ANODO TIPO 2

ANODO TIPO 3

ll1

m

l

ANODO TIPO 4

ANODO TIPO 6

l1

l

l

ANODO TIPO 5

ANODO TIPO 7

ANODO TIPO 8

l l1

l

Ø b

l l1

m

l l1

Ø b

l l1

m

Ø

Ø

Ø

Ø

Ø

Ø

Ø

b

b

b

b

b

ANODO TIPO 1

ANODO TIPO 2

ANODO TIPO 3

ll1

m

l

ANODO TIPO 4

ANODO TIPO 6

l1

l

l

ANODO TIPO 5

ANODO TIPO 7

ANODO TIPO 8

l l1

l

T1 T2 T3 T4 T5

T6 T7 T9T8

l l1

Ø b

l l1

m

Ø

Ø

Ø

Ø

Ø

Ø

Ø

b

b

b

b

b

ANODO TIPO 1

ANODO TIPO 2

ANODO TIPO 3

ll1

m

l

ANODO TIPO 4

ANODO TIPO 6

l1

l

l

ANODO TIPO 5

ANODO TIPO 7

ANODO TIPO 8

l l1

l

l l1

Ø b

l l1

m

Ø

Ø

Ø

Ø

Ø

Ø

Ø

b

b

b

b

b

ANODO TIPO 1

ANODO TIPO 2

ANODO TIPO 3

ll1

m

l

ANODO TIPO 4

ANODO TIPO 6

l1

l

l

ANODO TIPO 5

ANODO TIPO 7

ANODO TIPO 8

l l1

l

l l1

Ø b

l l1

m

Ø

Ø

Ø

Ø

Ø

Ø

Ø

b

b

b

b

b

ANODO TIPO 1

ANODO TIPO 2

ANODO TIPO 3

ll1

m

l

ANODO TIPO 4

ANODO TIPO 6

l1

l

l

ANODO TIPO 5

ANODO TIPO 7

ANODO TIPO 8

l l1

l

l l1

Ø b

l l1

m

Ø

Ø

Ø

Ø

Ø

Ø

Ø

b

b

b

b

b

ANODO TIPO 1

ANODO TIPO 2

ANODO TIPO 3

ll1

m

l

ANODO TIPO 4

ANODO TIPO 6

l1

l

l

ANODO TIPO 5

ANODO TIPO 7

ANODO TIPO 8

l l1

l

l l1

Ø b

l l1

m

Ø

Ø

Ø

Ø

Ø

Ø

Ø

b

b

b

b

b

ANODO TIPO 1

ANODO TIPO 2

ANODO TIPO 3

ll1

m

l

ANODO TIPO 4

ANODO TIPO 6

l1

l

l

ANODO TIPO 5

ANODO TIPO 7

ANODO TIPO 8

l l1

l

l l1

Ø b

l l1

m

Ø

Ø

Ø

Ø

Ø

Ø

Ø

b

b

b

b

b

ANODO TIPO 1

ANODO TIPO 2

ANODO TIPO 3

ll1

m

l

ANODO TIPO 4

ANODO TIPO 6

l1

l

l

ANODO TIPO 5

ANODO TIPO 7

ANODO TIPO 8

l l1

l


CODØ l l1 b


TEC-E2A-Z 16 25 12 7/16’’UNC USA TYPE T1 394

02041 16 31 12 3/8’’UNC Cummins T1 379

02920 16 38 11 7/16’’UNC John Deere T1 383

TEC-E2C-Z 16 38 12 7/16’’UNC USA TYPE T1 394

02028 16 41 9 7/16’’UNF Caterpillar T1 377

02043 16 50 10 15,5 Cummins T2 379

01317 16 50 10 7/16’’UNC Yanmar T1 391

20016 16 51 10 3/8’’UNC UK TYPE T1 393

02024-1 16 51 13 3/8’’UNC Caterpillar T1 377

TEC-E2-Z 16 51 12 7/16’’UNC USA TYPE T1 394



02900 16 63 13 7/16’’UNC Weber motor - Textron T1 389


TEC-E2B-Z 16 76 12 7/16’’UNC USA TYPE T1 394

20020 16 76 10 3/8’’UNC UK TYPE T1 393

20021 16 102 10 3/8’’UNC UK TYPE T1 393

20022 16 152 10 3/8’’UNC UK TYPE T1 393

02200 17 45 10 12x1 Scania T1 386

02201 17 45 10 M6 Scania T1 386

02170 17 60 10 14 Hyunday Seasall T2 382

02040 18 65 15 16X1,5 Cummins T1 379

20017 19 51 10 5/8’’UNC UK TYPE T1 393




20023 19 76 10 5/8’’UNC UK TYPE T1 393




20024 19 102 10 5/8’’UNC UK TYPE T1 393

20018 19 152 10 5/8’’UNC UK TYPE T1 393

02011 20 20 11 14 Aifo -Fpt - Iveco T2 374

01303 20 20 10 M8 Yanmar T7 390

02380 20 23 n/a n/a Ruggerini T4 386

01301 20 30 10 M8 Yanmar T7 390

02080 20 33 10 18X1,5 Isotta Fraschini T1 382

02082 20 35 13 18X1,5 Isotta Fraschini T1 382

37

THE TECNOSEAL RANGE

l l1

Ø b

l l1

m

Ø

Ø

Ø

Ø

Ø

Ø

Ø

b

b

b

b

b

ANODO TIPO 1

ANODO TIPO 2

ANODO TIPO 3

ll1

m

l

ANODO TIPO 4

ANODO TIPO 6

l1

l

l

ANODO TIPO 5

ANODO TIPO 7

ANODO TIPO 8

l l1

l

Ø b

l l1

m

l l1

Ø b

l l1

m

Ø

Ø

Ø

Ø

Ø

Ø

Ø

b

b

b

b

b

ANODO TIPO 1

ANODO TIPO 2

ANODO TIPO 3

ll1

m

l

ANODO TIPO 4

ANODO TIPO 6

l1

l

l

ANODO TIPO 5

ANODO TIPO 7

ANODO TIPO 8

l l1

l

T1 T2 T3 T4 T5

T6 T7 T9T8

l l1

Ø b

l l1

m

Ø

Ø

Ø

Ø

Ø

Ø

Ø

b

b

b

b

b

ANODO TIPO 1

ANODO TIPO 2

ANODO TIPO 3

ll1

m

l

ANODO TIPO 4

ANODO TIPO 6

l1

l

l

ANODO TIPO 5

ANODO TIPO 7

ANODO TIPO 8

l l1

l

l l1

Ø b

l l1

m

Ø

Ø

Ø

Ø

Ø

Ø

Ø

b

b

b

b

b

ANODO TIPO 1

ANODO TIPO 2

ANODO TIPO 3

ll1

m

l

ANODO TIPO 4

ANODO TIPO 6

l1

l

l

ANODO TIPO 5

ANODO TIPO 7

ANODO TIPO 8

l l1

l

l l1

Ø b

l l1

m

Ø

Ø

Ø

Ø

Ø

Ø

Ø

b

b

b

b

b

ANODO TIPO 1

ANODO TIPO 2

ANODO TIPO 3

ll1

m

l

ANODO TIPO 4

ANODO TIPO 6

l1

l

l

ANODO TIPO 5

ANODO TIPO 7

ANODO TIPO 8

l l1

l

l l1

Ø b

l l1

m

Ø

Ø

Ø

Ø

Ø

Ø

Ø

b

b

b

b

b

ANODO TIPO 1

ANODO TIPO 2

ANODO TIPO 3

ll1

m

l

ANODO TIPO 4

ANODO TIPO 6

l1

l

l

ANODO TIPO 5

ANODO TIPO 7

ANODO TIPO 8

l l1

l

l l1

Ø b

l l1

m

Ø

Ø

Ø

Ø

Ø

Ø

Ø

b

b

b

b

b

ANODO TIPO 1

ANODO TIPO 2

ANODO TIPO 3

ll1

m

l

ANODO TIPO 4

ANODO TIPO 6

l1

l

l

ANODO TIPO 5

ANODO TIPO 7

ANODO TIPO 8

l l1

l

l l1

Ø b

l l1

m

Ø

Ø

Ø

Ø

Ø

Ø

Ø

b

b

b

b

b

ANODO TIPO 1

ANODO TIPO 2

ANODO TIPO 3

ll1

m

l

ANODO TIPO 4

ANODO TIPO 6

l1

l

l

ANODO TIPO 5

ANODO TIPO 7

ANODO TIPO 8

l l1

l


CODØ l l1 b


01312 20 37 10 M8 Yanmar T7 390

01114 20 39 10 M8 Yamaha T1 390

02300 20 45 10 8x1,25 Baudouin T1 375

01306 20 55 10 M8 Yanmar T7 390

01308 20 68 10 M8 Yanmar T8 391


20005 20,7 19 8 M6 Galvion Elements T1 396

02022 22 20 10 5/8’’UNF Caterpillar T1 377

02402 22 26 7 M10 Castoldi T6 376

02650 26 23 15 M12Sx Condaria T1 400

02102 26 25 10 22 Nanni Diesel T2 384

00716 26 44 8 3/8’’UNC Volvo Penta T1 388

00716AL 26 44 8 3/8’’UNC Volvo Penta T1 388

20008 26,7 51 10 3/4’’UNC UK TYPE T1 393

20009 26,7 76 10 3/4’’UNC UK TYPE T1 393

20010 26,7 102 10 3/4’’UNC UK TYPE T1 393

20025 26,7 152 10 3/4’’UNC UK TYPE T1 393




TEC-E8A-Z 27 152 13 3/4’’UNC USA TYPE T1 394

02651 29 15 15 M12Sx Condaria T1 400

02652 29 30 15 M12Sx Condaria T1 400

01300 30 40 16 M8 Yanmar T1 390


02111 35 31 25 M8 Mitsubishi T1 384

20003-1 38 19 8 M6 Galvion Elements T1 396

01310 40 40 25 M10 Yanmar T7 391

01311 40 40 20 M8 Yanmar T7 391

38

THE TECNOSEAL RANGE Pencil anodes / complete with brass plug

1T 2T

2T-1 3T

4T 5TP

7TP6TP

c

c

c

c

c

1T

2T

3T

4T

c

5T

c

6T

l

Ø

Ø

Ø

Ø

Ø

a

a

a

a

a

a

l

l

l

l

Ø

l

Ø

2T-1

a l

c

7T

a l

Ø

c

c

c

c

c

1T

2T

3T

4T

c

5T

c

6T

l

Ø

Ø

Ø

Ø

Ø

a

a

a

a

a

a

l

l

l

l

Ø

l

Ø

2T-1

a l

c

7T

a l

Ø

c

c

c

c

c

1T

2T

3T

4T

c

5T

c

6T

l

Ø

Ø

Ø

Ø

Ø

a

a

a

a

a

a

l

l

l

l

Ø

l

Ø

2T-1

a l

c

7T

a l

Ø

c

c

c

c

c

1T

2T

3T

4T

c

5T

c

6T

l

Ø

Ø

Ø

Ø

Ø

a

a

a

a

a

a

l

l

l

l

Ø

l

Ø

2T-1

a l

c

7T

a l

Ø

c

c

c

c

c

1T

2T

3T

4T

c

5T

c

6T

l

Ø

Ø

Ø

Ø

Ø

a

a

a

a

a

a

l

l

l

l

Ø

l

Ø

2T-1

a l

c

7T

a l

Ø

c

c

c

c

c

1T

2T

3T

4T

c

5T

c

6T

l

Ø

Ø

Ø

Ø

Ø

a

a

a

a

a

a

l

l

l

l

Ø

l

Ø

2T-1

a l

c

7T

a l

Ø

c

c

c

c

c

1T

2T

3T

4T

c

5T

c

6T

l

Ø

Ø

Ø

Ø

Ø

a

a

a

a

a

a

l

l

l

l

Ø

l

Ø

2T-1

a l

c

7T

a l

Ø

c

c

c

c

c

1T

2T

3T

4T

c

5T

c

6T

l

Ø

Ø

Ø

Ø

Ø

a

a

a

a

a

a

l

l

l

l

Ø

l

Ø

2T-1

a l

c

7T

a l

Ø

CODa Ø l c


02013T 12x1,5 9,5 18 17 Aifo -Fpt - Iveco 2T 375

02100T 16x1,5 10 17 17 Nanni Diesel 4T 384

02012T 16x1,5 13 26 24 Aifo -Fpt - Iveco 2T 375

02010/99T 18x1,5 13 26 24 Aifo -Fpt - Iveco 2T 375

02061T 18x1,5 14 20 22 VM 2T 388

02081T 18x1,5 14 20 27 Isotta Fraschini 7T 382

01800 18x1,5 14 26 24 Renault Marine Couach 2T 385



02060T 18x1,5 14 40 22 VM 2T 388

01320T 18x1,5 15 20 22 Yanmar 2T 391

01320T 18x1,5 15 20 22 ZF 2T 392

02090T 18x1,5 15 22 24 Renault Marine Couach 2T 385

02353T 18x1,5 15 30 24 Lombardini 2T 383

06012T 18x1,5 15 63 22 ZF 2T 392

02900T 20x1,5 16 63 15 Weber motor - Textron 4T 389

02170T 20x1,5 17 60 24 Hyunday Seasall 2T 382

02082T 24X1,5 20 35 30 Isotta Fraschini 7T 382

02300T 25x1,5 20 45 30 Baudouin 2T 375


02011T/98 28x1,5 20 20 27 Aifo -Fpt - Iveco 3T 375

01452 1/4''GAS CONICO (bspt) 8 30 14 Isotherm 2T 402

02800T 1/4''GAS CONICO (bspt) 9,5 20 17 Beta Marine 2T 375

02150T 1/4''GAS CONICO (bspt) 10 15 17 Martec 2T 384

39


1T 2T

2T-1 3T

4T 5TP

7TP6TP

c

c

c

c

c

1T

2T

3T

4T

c

5T

c

6T

l

Ø

Ø

Ø

Ø

Ø

a

a

a

a

a

a

l

l

l

l

Ø

l

Ø

2T-1

a l

c

7T

a l

Ø

c

c

c

c

c

1T

2T

3T

4T

c

5T

c

6T

l

Ø

Ø

Ø

Ø

Ø

a

a

a

a

a

a

l

l

l

l

Ø

l

Ø

2T-1

a l

c

7T

a l

Ø

c

c

c

c

c

1T

2T

3T

4T

c

5T

c

6T

l

Ø

Ø

Ø

Ø

Ø

a

a

a

a

a

a

l

l

l

l

Ø

l

Ø

2T-1

a l

c

7T

a l

Ø

c

c

c

c

c

1T

2T

3T

4T

c

5T

c

6T

l

Ø

Ø

Ø

Ø

Ø

a

a

a

a

a

a

l

l

l

l

Ø

l

Ø

2T-1

a l

c

7T

a l

Ø

c

c

c

c

c

1T

2T

3T

4T

c

5T

c

6T

l

Ø

Ø

Ø

Ø

Ø

a

a

a

a

a

a

l

l

l

l

Ø

l

Ø

2T-1

a l

c

7T

a l

Ø

c

c

c

c

c

1T

2T

3T

4T

c

5T

c

6T

l

Ø

Ø

Ø

Ø

Ø

a

a

a

a

a

a

l

l

l

l

Ø

l

Ø

2T-1

a l

c

7T

a l

Ø

c

c

c

c

c

1T

2T

3T

4T

c

5T

c

6T

l

Ø

Ø

Ø

Ø

Ø

a

a

a

a

a

a

l

l

l

l

Ø

l

Ø

2T-1

a l

c

7T

a l

Ø

c

c

c

c

c

1T

2T

3T

4T

c

5T

c

6T

l

Ø

Ø

Ø

Ø

Ø

a

a

a

a

a

a

l

l

l

l

Ø

l

Ø

2T-1

a l

c

7T

a l

Ø

CODa Ø l c


02053T 1/4''GAS CONICO (bspt) 10 18 17 Bukh 2T 376

02070T 1/4''GAS CONICO (bspt) 10 18 14 Ford 2T 380

02351T 1/4''GAS CONICO (bspt) 10 18 14 Lombardini 2T 383

06002T 1/4''GAS CONICO (bspt) 10 18 14 ZF 2T 392



02021T 1/4''GAS CONICO (bspt) 10 55 10 Caterpillar 1T 378

06003T 3/8''GAS CONICO (bspt) 12 26 18 ZF 2T 392

01318T 3/8''GAS CONICO (bspt) 12 30 17 Yanmar 2T 392

02045-1T 3/8''GAS CONICO (bspt) 12 30 11 Cummins 1T 380

02027T 3/8''GAS CONICO (bspt) 12 40 11 Caterpillar 1T 378


02003T 3/8''GAS CONICO (bspt) 12 41 11 General Motors 1T 381

01160T 3/8''GAS CONICO (bspt) 12 52 19 Yamaha 2T-1 390

02029T 3/8''GAS CONICO (bspt) 12,7 38 19 Caterpillar 2T 379

02045T 3/8''GAS CONICO (bspt) 12,7 50 19 Cummins 2T 380

02031T 3/8''GAS CONICO (bspt) 13 26 18 Onan 2T 385

02071T 1/2'' GAS CONICO (bspt) 14 26 22 Ford 2T 380

02350T 1/2'' GAS CONICO (bspt) 14 26 22 Lombardini 2T 383

00713T 1/2'' GAS CONICO (bspt) 15,5 40 13 Volvo Penta 1T 389

02044T 1/2'' GAS CONICO (bspt) 15,5 50 22 Cummins 2T 380

00714T 1/2'' GAS CONICO (bspt) 16 30 13 Volvo Penta 1T 389

02028T 1/2'' GAS CONICO (bspt) 16 41 25 Caterpillar 2T 379

01317T 1/2'' GAS CONICO (bspt) 16 50 22 Yanmar 2T 391

02043T 1/2'' GAS CONICO (bspt) 16 50 22 Cummins 2T 380

02000T 1/2'' GAS CONICO (bspt) 16 54 13 General Motors 1T 381

02023T 1/2'' GAS CONICO (bspt) 16 76 14 Caterpillar 1T 378

01451 1/2'' GAS CONICO (bspt) 17 37 22 Isotherm 2T 402

40


1T 2T

2T-1 3T

4T 5TP

7TP6TP

c

c

c

c

c

1T

2T

3T

4T

c

5T

c

6T

l

Ø

Ø

Ø

Ø

Ø

a

a

a

a

a

a

l

l

l

l

Ø

l

Ø

2T-1

a l

c

7T

a l

Ø

c

c

c

c

c

1T

2T

3T

4T

c

5T

c

6T

l

Ø

Ø

Ø

Ø

Ø

a

a

a

a

a

a

l

l

l

l

Ø

l

Ø

2T-1

a l

c

7T

a l

Ø

c

c

c

c

c

1T

2T

3T

4T

c

5T

c

6T

l

Ø

Ø

Ø

Ø

Ø

a

a

a

a

a

a

l

l

l

l

Ø

l

Ø

2T-1

a l

c

7T

a l

Ø

c

c

c

c

c

1T

2T

3T

4T

c

5T

c

6T

l

Ø

Ø

Ø

Ø

Ø

a

a

a

a

a

a

l

l

l

l

Ø

l

Ø

2T-1

a l

c

7T

a l

Ø

c

c

c

c

c

1T

2T

3T

4T

c

5T

c

6T

l

Ø

Ø

Ø

Ø

Ø

a

a

a

a

a

a

l

l

l

l

Ø

l

Ø

2T-1

a l

c

7T

a l

Ø

c

c

c

c

c

1T

2T

3T

4T

c

5T

c

6T

l

Ø

Ø

Ø

Ø

Ø

a

a

a

a

a

a

l

l

l

l

Ø

l

Ø

2T-1

a l

c

7T

a l

Ø

c

c

c

c

c

1T

2T

3T

4T

c

5T

c

6T

l

Ø

Ø

Ø

Ø

Ø

a

a

a

a

a

a

l

l

l

l

Ø

l

Ø

2T-1

a l

c

7T

a l

Ø

c

c

c

c

c

1T

2T

3T

4T

c

5T

c

6T

l

Ø

Ø

Ø

Ø

Ø

a

a

a

a

a

a

l

l

l

l

Ø

l

Ø

2T-1

a l

c

7T

a l

Ø

CODa Ø l c




02026T 1-1/4''GAS CONICO (bspt) 19 54 24 Caterpillar 1T 378

TEC-E00 1/8'' NPT 6,35 51 11 USA TYPE 2T 390

TEC-E00 1/8'' NPT 6,35 51 11 Westerbeke 2T 395

TEC-SD1 1/8'' NPT 9,5 51 11 SEN-DURE 2T 386

01092 1/4'' NPT 10 31,8 14 SEADOO (BRP) 2T 386

TEC-E0B 1/4''NPT 9,5 19 12,7 USA TYPE 2T 395

TEC-E0 1/4''NPT 9,5 44 12,7 USA TYPE 2T 390

TEC-E0 1/4''NPT 9,5 44 12,7 Westerbeke 2T 395

TEC-E0A 1/4''NPT 9,5 64 12,7 USA TYPE 2T 395

TEC-SD5 1/4''NPT 9,5 12,7 14 SEN-DURE 2T 387



TEC-SD2 1/4''NPT 9,5 44 14 SEN-DURE 2T 386


TEC-E1H 3/8''NPT 9,5 51 17,5 USA TYPE 2T 395

TEC-E1G 3/8''NPT 12,7 25 17,5 USA TYPE 2T 395



02941T 3/8''NPT 12,7 32 19 Steyr Motor 2T 387

TEC-E1F 3/8''NPT 12,7 32 17,5 USA TYPE 2T 395

01321T 3/8''NPT 12,7 38 19 Yanmar 2T 391

TEC-E1E 3/8''NPT 12,7 38 17,5 USA TYPE 2T 390

TEC-E1E 3/8''NPT 12,7 38 17,5 Westerbeke 2T 395

TEC-E1D 3/8''NPT 12,7 44 17,5 USA TYPE 2T 395

TEC-E1 3/8''NPT 12,7 51 17,5 USA TYPE 2T 390

41


1T 2T

2T-1 3T

4T 5TP

7TP6TP

c

c

c

c

c

1T

2T

3T

4T

c

5T

c

6T

l

Ø

Ø

Ø

Ø

Ø

a

a

a

a

a

a

l

l

l

l

Ø

l

Ø

2T-1

a l

c

7T

a l

Ø

c

c

c

c

c

1T

2T

3T

4T

c

5T

c

6T

l

Ø

Ø

Ø

Ø

Ø

a

a

a

a

a

a

l

l

l

l

Ø

l

Ø

2T-1

a l

c

7T

a l

Ø

c

c

c

c

c

1T

2T

3T

4T

c

5T

c

6T

l

Ø

Ø

Ø

Ø

Ø

a

a

a

a

a

a

l

l

l

l

Ø

l

Ø

2T-1

a l

c

7T

a l

Ø

c

c

c

c

c

1T

2T

3T

4T

c

5T

c

6T

l

Ø

Ø

Ø

Ø

Ø

a

a

a

a

a

a

l

l

l

l

Ø

l

Ø

2T-1

a l

c

7T

a l

Ø

c

c

c

c

c

1T

2T

3T

4T

c

5T

c

6T

l

Ø

Ø

Ø

Ø

Ø

a

a

a

a

a

a

l

l

l

l

Ø

l

Ø

2T-1

a l

c

7T

a l

Ø

c

c

c

c

c

1T

2T

3T

4T

c

5T

c

6T

l

Ø

Ø

Ø

Ø

Ø

a

a

a

a

a

a

l

l

l

l

Ø

l

Ø

2T-1

a l

c

7T

a l

Ø

c

c

c

c

c

1T

2T

3T

4T

c

5T

c

6T

l

Ø

Ø

Ø

Ø

Ø

a

a

a

a

a

a

l

l

l

l

Ø

l

Ø

2T-1

a l

c

7T

a l

Ø

c

c

c

c

c

1T

2T

3T

4T

c

5T

c

6T

l

Ø

Ø

Ø

Ø

Ø

a

a

a

a

a

a

l

l

l

l

Ø

l

Ø

2T-1

a l

c

7T

a l

Ø

CODa Ø l c


TEC-E1 3/8''NPT 12,7 51 17,5 Westerbeke 2T 395

TEC-E2A 1/2''NPT 16 25 22 USA TYPE 2T 395

TEC-SD10 1/2''NPT 16 25 25 SEN-DURE 2T 387

TEC-E2C 1/2''NPT 16 38 22 Kohler 2T 382

TEC-E2C 1/2''NPT 16 38 22 USA TYPE 2T 395

TEC-SD9 1/2''NPT 16 41 25 SEN-DURE 2T 387

TEC-E2 1/2''NPT 16 51 22 USA TYPE 2T 395

TEC-E2B 1/2''NPT 16 76 22 USA TYPE 2T 395




02029bisT 1/4''GAS (bspp) 10 38 22 Caterpillar 2T 379

02050T 3/8''GAS (bspp) 12 35 22 Bukh 2T 376

02022T 3/8''GAS (bspp) 22 20 16 Caterpillar 1T 378

02960T 1/2''GAS (bspp) 14 45 13 Universal 2T 387

02961T 1/2''GAS (bspp) 14 71 13 Universal 1T 387

02962T 1/2''GAS (bspp) 14 83 19 Reintjes 2T 385

02024-1T 1/2''GAS (bspp) 16 51 14 Caterpillar 1T 378

02024T 1/2''GAS (bspp) 16 63 14 Caterpillar 1T 378

02200T 1/2''GAS (bspp) 17 45 17 Scania 1T 386

02201T 1/2''GAS (bspp) 17 45 17 Scania 4T 386

00716T 1'GAS (bspp) 26 44 19 Volvo Penta 6T 389

02029-1T 3/4''UNF 14 50 22 Caterpillar 2T 379

02021/1T 7/16''UNF 9 35 14 Caterpillar 2T 378

42

THE TECNOSEAL RANGE INDUSTRIAL ANODES - Available upon request

43

THE TECNOSEAL RANGE INDUSTRIAL ANODES - Available upon request

44

THE TECNOSEAL RANGE note

45

THE TECNOSEAL RANGE note

Anode Huis BV.Nijverheidsstraat 2c

3371 XE Hardinxveld-Giessendam [email protected]

T 085-486-1999

VBADanodehuis.nl

PRODUCT SUMMARY - Anode Huis - Anode Huis€¦ · ZINC anodes Several alloys are available which...

Documents

Transcript of PRODUCT SUMMARY - Anode Huis - Anode Huis€¦ · ZINC anodes Several alloys are available which...