Product Management SAP QM January, 2016

Product Management SAP QMJanuary, 2016

Quality Management in S/4HANA

© 2015 SAP SE or an SAP affiliate company. All rights reserved. 2Internal

Legal Disclaimer

This presentation outlines our general product direction and should not be relied on in

making a purchase decision. This presentation is not subject to your license agreement or

any other agreement with SAP. SAP has no obligation to pursue any course of business

outlined in this presentation or to develop or release any functionality mentioned in this

presentation. This presentation and SAP's strategy and possible future developments are

subject to change and may be changed by SAP at any time for any reason without notice.

This document is provided without a warranty of any kind, either express or implied,

including but not limited to, the implied warranties of merchantability, fitness for a particular

purpose, or non-infringement. SAP assumes no responsibility for errors or omissions in this

document, except if such damages were caused by SAP intentionally or grossly negligent.


LoB Manufacturing road map for SAP S/4HANAQuality management

• SAP Fiori apps for qualitytechnicians

• Modernized problem handling• Quality Management Information

System (QMIS) replaced by CDS1)

views

• Role-based Web-enabled SAP Fiori apps forquality technicians, planners, engineers,auditors, managers etc.

• Simple defect recording• Flexible and harmonized action management• Simplified inspection planning with easy

handling of inspection characteristics

• Support of standardized complaint processessuch as 8D (8 Disciplines Problem Solving)and CAPA (Corrective and Preventive Actions)

• Integrated Quality planning as part of R&Dsuch as APQP2), PPAP3), HACCP4)

• Predefined business processes and roles forfast implementation

Solution today Planned innovations Future direction

• Current road map formanufacturing on SAP ServiceMarketplace

1) Core data services 2) Advanced Product Quality Planning 3) Production Part Approval Process4) Hazard Analysis and Critical Control Points

https://service.sap.com/~sapidb/011000358700001150742010E.pdf


Planned Roles at a Glance

RoleQuality TechnicianQuality PlannerQuality EngineerQuality ManagerQuality AuditorCalibration Technician


Quality Technician

§ Manages physical samples (process industry)

§ Carries out different types of quality inspections

§ Provides inspection results to enable timelyinformed release decision and therefore supportensuring product compliance and qualityrequirements

§ Creates unplanned inspection characteristics andphysical samples

§ Triggers planned and unplanned inspection lots

§ Records defects in case of an issue

§ Tracks and confirms quality notification tasks thequality technician is assigned to


First App: Record Inspection Results

Use Case 1The quality technician wants to gothrough a predefined work list toorganize/prioritize his own work.Selection criteria could be a work center.

Use Case 2The quality technician wants to recordone or more specific characteristicsacross different objects such asinspection lots or samples.Multiple inspection lot numbers orsample numbers can be enteredmanually or scanned in.


Designs WalkthroughLaunchpad


Designs WalkthroughWork List with Inspection Lots


Designs WalkthroughWork List with Physical Samples


Designs WalkthroughResults Recording


Designs WalkthroughResults Recording – Grid List


Designs WalkthroughResults Recording – Characteristic History


© 2015 SAP SE or an SAP affiliate company. All rights reserved.

No part of this publication may be reproduced or transmitted in any form or for any purpose without the express permission of SAP SE or an SAP affiliate company.

SAP and other SAP products and services mentioned herein as well as their respective logos are trademarks or registered trademarks of SAP SE (or an SAP affiliatecompany) in Germany and other countries. Please see http://global12.sap.com/corporate-en/legal/copyright/index.epx for additional trademark information and notices.

Some software products marketed by SAP SE and its distributors contain proprietary software components of other software vendors.

National product specifications may vary.

These materials are provided by SAP SE or an SAP affiliate company for informational purposes only, without representation or warranty of any kind, and SAP SE or itsaffiliated companies shall not be liable for errors or omissions with respect to the materials. The only warranties for SAP SE or SAP affiliate company products andservices are those that are set forth in the express warranty statements accompanying such products and services, if any. Nothing herein should be construed asconstituting an additional warranty.

In particular, SAP SE or its affiliated companies have no obligation to pursue any course of business outlined in this document or any related presentation, or to developor release any functionality mentioned therein. This document, or any related presentation, and SAP SE’s or its affiliated companies’ strategy and possible futuredevelopments, products, and/or platform directions and functionality are all subject to change and may be changed by SAP SE or its affiliated companies at any timefor any reason without notice. The information in this document is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. All forward-looking statements are subject to various risks and uncertainties that could cause actual results to differ materially from expectations. Readers are cautioned not to placeundue reliance on these forward-looking statements, which speak only as of their dates, and they should not be relied upon in making purchasing decisions.

Product Management SAP QM January, 2016

Documents

Transcript of Product Management SAP QM January, 2016