Product Guide - Aask us Ltd · 21.2 5 0 21.2 1 0 0 21.2 1 2. 5 21.2 2 5 21.2 9 21.2 1 9 21.2 4 21.2...
Transcript of Product Guide - Aask us Ltd · 21.2 5 0 21.2 1 0 0 21.2 1 2. 5 21.2 2 5 21.2 9 21.2 1 9 21.2 4 21.2...
Product Guide
www.aask.us
aask us are the leading UK manufacturer of trims and bespoke products for suspended ceilings, partitions and dry lining.
Customer satisfaction is fundamental to our success, a fact that we never forget. We will strive to meet your requirements, from a stock product to a special design, and we can assure you that you will get the best service possible.
With a production area of 13,500 square feet, including in-house pre-treatment, powder coating line, and extensive sheet metal machinery, we can offer a comprehensive range of products in the fastest possible lead-time.
and products we can supply. However, we are continually adapting and introducing items into our range, so if you cannot
01869 322321 [email protected] www.aask.us
metal stud
M.D.F rebatedskirting
metal channel
adhesive / sealant
tape & joint
Reveal Trim
Reveal Trim
Plasterboard
tape & jointReveal Trim
REVEAL APPLICATIONS
Reveal Trims are used to create ashadow reveal on partitions and ceilings
Wall Reveal
Reveal /Skirting Trim
Dry wallscrew
Page 1
MF System
610
30
/ 40
/ 50
/ 75
/ 100
12.5
25
12.5
15 20 25
15
12.5
13.4
ref
15
15
13.4
ref
12.5
25
01869 322321 [email protected] www.aask.us
Page 2
aa-R6
aa-ST30
aa-ST40
aa-ST50
aa-ST75
aa-ST100
aa-R10
aa-W25
aa-R12
REVEAL TRIMUsed to create horizontal or vertical reveal details where there are areasof dry lining, suspended ceilings, door frames, skirting, window frames etc.,
SKIRTING TRIMUsed to create recessed skirting detailsin partitions and dry lined walls
WALL SHADOWLINE
aa-W12
Used to create horizontal orvertical linear recessed features
aa-R15 aa-R20 aa-R25
REVEAL DEEP TRIMUsed with 15mm plasterboard for Deep Reveal
aa-RD12 aa-RD15
DOOR REVEALUsed to create defined recess featureadjacent to door frames, windows etc.,
aa-D12
aa-D25
21.2
50
21.2
100
21.2
12.5
21.225
21.2
9
21.2
19
21.2
4
21.2
15
01869 322321 [email protected] www.aask.us
EDGE BEAD
aa-E100
aa-E50
E trim, used to create crisp horizontal or vertical straight edges at theend of a run of platerboard, or where a raised or recessed feature isrequired, for example a skirtng rebate or adjacent to a door frame. The trim can be used in both wall and ceiling applications.
aa-E12
aa-E25
FLEXIBLE RANGEFlexi trims can be curved on siteto create horizontal or vertical curvesat the edges of dry lined plasterboard,or where a curved feature is required.
Please call our office for further adviceon what can be achieved.
aa-E9
aa-E19
aa-E4
aa-E15
Page 3
20 1520
15
2020
20
01869 322321 [email protected] www.aask.us
aa-JTA20aa-JTA0 aa-JTA15
12.5 mm PlasterboardTape & Joint to suit
'mf' system - as required
Lay-on TypeCeiling Tile
SuspensionAngle
JUNCTION TRIM - ANGLE
JTA trim, used to create crisp junction details between mineral fibre,g.r.g, or full module metal ceiling systems and adjacent areas ofplasterboard. The profiles with a shadow rebate provide a clear definition between the different ceiling types.
Page 4
20
38
1520
15
38
2020
20
38
01869 322321 [email protected] www.aask.us
JUNCTION TRIM - CHANNEL
JT trim, used to create junction details between metalceiling systems and adjacent areas of plasterboard.With the facility to use tile wedges on the cut tile edge.The profiles with a shadow rebate provide a clear definition between the different ceiling types.
12.5 mm PlasterboardTape & Joint to suit
'mf' system - as required
Metal Ceiling Tilewith cut edge
SuspensionAngle
Tile Wedge
aa-JT20aa-JT0 aa-JT15
Page 5
20
38
15
32
25
50
25
25
50
50
19
32
38
20
01869 322321 [email protected] www.aask.us
CHANNEL TRIM
aa-CH20
aa-AG15
aa-AG2525 aa-AG5025
Angle Trims are used to create a crisp perimeter detail where mineral fibre,g.r.g. plasterboard or full module metal ceiling tile systems abut walls,partitions or upstands. Angle Trims can be factory curved to suit bothconcave and convex walls and can be formed into column rings.
ANGLE TRIM
Channel Trims are used to create a crispperimeter detail where cut metal ceiling tilesystems abut walls, partitions or upstands.The channel feature is designed to acceptstandard hold down wedges to retain cut tiles.Channel Trims can be factory curved to suitboth concave and convex walls and can beformed into column rings.
aa-AG5050
aa-AG19 aa-AG20
Page 6
20 15
15
20 20
20
01869 322321 [email protected] www.aask.us
Lay-on TypeCeiling Tile
aa-SA15 aa-SA20
Page 7
Used to create crisp shadowline perimeter detail wheremineral fibre, g.r.g, plasterboard or full module metal ceiling systems abut walls, partitions and upstands.
SHADOWGAP ANGLE
20
38
15
15
20
38
20
20
01869 322321 [email protected] www.aask.us
aa-SC15
Metal PanCeiling Tile
Tile Wedge
aa-SC20
Used to create crisp shadowline perimeter detail wherecut metal ceiling systems abut walls, partitions and upstands.The channel feature is designed to accept standard holddown wedges to retain cut tiles
SHADOWGAP CHANNEL
Page 8
21
1515
8
15
15
01869 322321 [email protected] www.aask.us
12.5 mm PlasterboardTape & Joint to suit
SuspensionAngle
'mf' system - as required
Lay-on TypeCeiling Tile
JTAS Step trim, used to create crisp junction details between mineralfibre, g.r.g, or full module metal ceiling systems and adjacent areas ofplasterboard. The tegular edge of the tile is matched with the stepof the trim, creating a shadow rebate which provides a clear definitionbetween the different ceiling types.
aa-JTAS-8 aa-JTAS-15 aa-JTAS-21
JUNCTION TRIM - ANGLE STEP
Page 9
01869 322321 [email protected] www.aask.us
METAL WORK
With a comprehensive range of Sheet Metal production capacity, aask uscan manufacture all of your metal requirements. Our machinery includes 4mtr Guillotine and Press Brake, CNC Turret Punch, Welding of steel andaluminium. Contact our sales office for your requirements of Panels, Brackets, Cills,Flashings, Angles, Trays, and special designs.
Page 10
01869 322321 [email protected] www.aask.us
BLIND BOX
Manufactured from aluminium or steel sheet. Precision engineeredto suit site requirements, can be adapted to all ceiling requirements,and can be supplied with suspension brackets, mitres, welded cornersend caps etc.,
Typical Detail
12.5 mm PlasterboardTape & Joint to suit
'mf' system - as required
Tape & Joint detailformed in press metal
Example of other options
Page 11
13.4
6
35
13.4
6
3810
35
15 20
15
30
2010
10
01869 322321 [email protected] www.aask.us
Lay-on TypeCeiling Tile
12.5 mm Plasterboard
aa-UA35
aa-UC35
Used to create crisp junction details between full modulemetal ceiling systems and adjacent areas of plasterboard.
JUNCTION TRIM
Metal PanCeiling Tile
Metal PanCeiling Tile
aa-JTAS1010 aa-JTFM15-30
JUNCTION UPSTAND
Upstand trims, used to create junction details between suspendedceiling systems and vertical plasterboard or MDF upstands
For mineral tiles
For cut metal tiles
Page 12
5.5 15
155.5
12.7
15
15
20
20
01869 322321 [email protected] www.aask.us
PLASTERBOARD TRIM
12.5 mm PlasterboardTape & Joint to suit
mf5 - as required
aa-P15
aa-PT15 aa-PT20
Used to create crisp edging perimeter detail where plasterboardceiling systems abut walls, partitions and upstands.
aa-P01"Plug in" type"Plug in" type
Page 13
15
10
37.3
15
37.3
42.3
11
01869 322321 [email protected] www.aask.us
PERIMETER JUNCTION
12.5 mm PlasterboardTape & Joint to suit
'mf' system - as required
Used to create crisp junction detail between areas of "spring tee"metal ceiling systems and adjacent plasterboard ceiling areas
Spring Tee System
Bevel Edge MetalTile system
aa-PE15aa-PE0
Page 14
50
120
38
3737
20
20
25
40
2515
35
37
150
38
20
38
60
40
30
01869 322321 [email protected] www.aask.us
aa-BR150, BANDRASTER / JUNCTION TRIM
aa-BR40 BANDRASTER
aa-AG50/120
OTHER PROFILES
aa-JA37 aa-J37
aa-AG2020 aa-AG4025
aa-T25aa-T15 aa-T37
Tee Bars with "MARTINGALE" twistclip feature ideal for non-standard modulesand "non-ferrous" MRI scanner rooms
Can be machinedto create other sizes
Tile Wedge
Metal Ceiling Tilewith cut edge
aa-CH2060
Metal PanCeiling Tile
Page 15
82
19
19
19154
19
50
100
150
200
01869 322321 [email protected] www.aask.us
X-CC2 Upstand,External Corner Clipsupplied c/w 2 No. fixing screws
X-CC1 Upstand, Internal Corner Clipsupplied c/w 2 No. fixing screws
X-SP1 Upstand, Straight Splice Clipsupplied c/w 2 No. fixing screws
X-501a Tee Bar Connector Clip
aa-US50 aa-US100 aa-US150 aa-US200
aa-UW154
Available as pre-cut or curvedkits to any size requirement.
Page 17
ISLANDS
The Upstand profiles are ideal for creating 'island' and 'floating ceilings'where the Upstand Channel forms a frame around a ceiling area and issuspended either directly from the soffit or below an existing ceiling. Inaddition the suspension can be set back from the profile edge enhancingthe floating island effect. These profiles create ideal aesthetic solutionswhilst maintaining all the acoustic benefits of the ceiling tiles. Complete withfull range of accessories
18 21
20
75 /
100
/ 122
75 /
100
/ 122
01869 322321 [email protected] www.aask.us
Glazing Type Plain Type
END CAP RANGE
aa-ECP trim, Plain cap closure trim for partition walls
aa-ECG trim, Glazing cap closure trim for partition wallswith a pocket to accept single glazing and gasket
aa-ECG75
aa-ECG100
aa-ECG122
aa-ECP75
aa-ECP100
aa-ECP122
Page 18
25
25
25
25
25
25
50
01869 322321 [email protected] www.aask.us
aa-GL02
GLAZING RANGE
aa-GL03 aa-GL04 aa-GL50
All profiles are stocked in;RAL 9010 WhiteRAL 9006 SilverRAL9005 Black
aa-GL01 / aa-GL50
aa-GL04 aa-GL03
aa-GL01 aa-GL02
The aa-GL range is a sleek single glazedflush look head and base track system.
Page 19
01869 322321 [email protected] www.aask.us
External
Toe-Out
Internal
Toe-In
REVEALS & SKIRTINGS
EDGE BEADS
External Internal
Toe-In Toe-Out
Barrel Vault
STEEL FORMERS
Toe-InToe-Out
ANGLES
CHANNELS
Toe-InToe-Out
Page 20
CURVED TRIMSThe majority of our profiles can be curved, either in one piece,or for more complicated profiles fabricated in composite.Please call our office for further details.
Designed use: Products are supplied as designed and intended for use as support or feature trims as part of conventional dry wall, partition or suspended ceiling systems.
Materials:
available including all RAL, NCS and BS colours. Prior to powdercoating the extrusions are given a non-chromate pre-treatment process to ensure adequate powder adhesion. Standard length is 3000mm unless stated otherwise.
aask us products conform to current regulations regarding CE marking and declarations of conformity.
Fire Performance
Installation – Dry Lining Trims Dry Lining Trims are designed for use as part of a conventional dry wall, partition or ceiling system with either single or multiple layers of plasterboard. aask us Ltd dry lining trims may be used with all major brands of plasterboard, metal stud, channels and timber framing. Please note framing centres should not exceed 600mm.
fully support the trim and ensure there is no movement. We recommend a minimum of 150mm centres for dry wall screws to ensure rigidity.
The paper reinforcing jointing tape should not be visible beyond the plastering stop detail and
should be removed from the visible faces of the trim with a damp cloth whilst it is still soft and
Installation – Ceiling Trims
refer to information above on Dry Lining Trims.
Tel: 01869 322321 Fax: 01869 322771 [email protected] www.aask.us
need more information..? aask us
www.aask.usLaunton Business Centre, Murdock Road, Bicester, Oxfordshire OX26 4PP
Tel: 01869 322321 Fax: 01869 [email protected]
aask us is dedicated to supplying high quality to our customers
– and that means high quality service too.
technical help...? aask us
need stock tomorrow...? aask us
bespoke one-off design...? aask us