Product Catalogue 1/2011, Valopaa Ltd.
-
Upload
milla-halttu -
Category
Documents
-
view
220 -
download
2
description
Transcript of Product Catalogue 1/2011, Valopaa Ltd.
PRODUCT CATALOGUESPRING 2011
Product Catalogue 1/2011Version 1.0 / 12.4.2011c/o Valopaa Ltd.
ContentsLed technology Introduction 4 Light distribution 7
Street lighting VP 1301 led street light 8 VP 1302 led street light 10 VP 2221 ja VP 2223 led bridge lights 12 VP 3241 led light for signposts 13
Area lighting VP1301 led light fixture 14 VP 1302 led light fixture 14 VP 3311 led light fixture 14
Ceiling lighting VP 2221 led light fixture 16 VP 2223 led light fixture 18 VP 2321 led light fixture 19 VP 2222 led ceiling light 20 VP 2231 led light fixture 22
Spotlighting VP 3111 led spotlight 24 VP 3311 led spotlight 26
Led modules VPM led modules 28 Modernization of light fixtures 29
Valopaa Ltd. Mäkelininkatu 15 90100 Oulu, Finland tel. +358 10 470 8890 www.valopaa.com4
VP1301
Properly implemented led light fixture brings cost effectiveness and reliability into lighting
Led technology has developed into a significantlighting technology. Well designed led light fixtureis more energy efficient and reliable than tradi-tional light fixtures. Led light fixtures can also be customized to achieve optimal quantity of light and distribution of luminous intensity. Hence, the existing poles can be utilized when renewing street lights.
The products of Valopaa Ltd. provide led lightingsolutions to various applications. Well designedstructure of led light fixture ensures reliability also in demanding environments.
Inexpensive lifecycle costs
The Valopaa products use leds that are developedfor professional lighting and that have highenergy efficiency. The heat control features of theled light fixture and its dust and water proof struc-ture (high in IP-rating) ensure long operating timeand lower lighting costs compared to traditionallighting technologies. The modular structure ofthe Valopaa products also enables easy maintain-ability.
Customized products and applications
The Valopaa product range includes led lightfixtures that can be fastened to poles, walls and ceilings. Other means of fastening are also pos-sible depending on the case. Lighting capacity and product application can be varied, and the light fixtures can be produced with different power supplies. In addition to standard products, Valopaa Ltd. develops customized led lighting products as ODM services.
The best alternative for replacing mercury vapour lamps
EU has forbidden the sales of mercury vapour lamps in the EuP-directive, which comes into effect in fall 2015. The Valopaa products can be used to replace the mercury vapour lamps in street lighting by utilizing the existing poles. In many cases the payback period is only 5 years. Thus, replacing the old mercury vapour lamps already now is a profit-able investment!
Valopaa Ltd. Mäkelininkatu 15 90100 Oulu, Finland tel. +358 10 470 8890 www.valopaa.com4
Valopaa Ltd. Mäkelininkatu 15 90100 Oulu, Finland tel. +358 10 470 8890 www.valopaa.com 5
VP1301
See streets and buildingsin a new light
Valopaa Ltd. develops, produces and markets intelligent, reliable, and energy efficient led light fixtures and led lighting systems for demanding environments. Our competences include all aspects of product devel-opment of light fixtures: electrical and mechanical engineering, design for reliability, thermal management, optical engineering and industrial design. We manufacture our products in-house to ensure high product quality, as well as flexible and cost effective operations.
Valopaa’s street lighting solution is the first Finnish LED street light approved by Finnish Transport Agency. VP1301 LED street light complies with Finnish Transport Agency’s requirements of light distribution, lumi-nous intensity, structure and durability. As a result, VP1301 complies with the requirements of different gov-ernmental agencies across the whole EU region. The Association for Finnish Work has issued Valopaa Ltd. the right to use the Key Flag origin mark with the VP led light fixtures. The Key Flag is a registered collective trade mark that proves a product or service is Finnish-made.
Valopaa’s name
The company name Valopaa comes from the Finnish language word ´valopää´. Originally the word is used to describe a person who is creative, innovative and ready to take new challenges. The name has also other background, Finnish word ´valo´ means light and word ´pää´ means head. i.e. direct translation is ´lighting head´. For us in Valopaa the company name means intelligent lighting solutions.
Our target is that the way of doing our work reflects the name of the company. Our led lighting platform and lighting solutions will be as intelligent and innovative as the name of our company obligates. We believe that our customers will also value environmentally friendly, high quality, state of art led lighting solutions.
Values of Valopaa Ltd.Added value toour customers• cost benefits over life cycle• quality of theproducts andoperations
Profitability –productivity• effective operations• permission and dutyfor decision making• cost-effectiveprocedures
Continuousdevelopment• continuous learning• open-mindednessand sincerity• support for taking personal responsibility
Respect
• environment• personnel, partners,share holders,customers,competitors
Valopaa Ltd. Mäkelininkatu 15 90100 Oulu, Finland tel. +358 10 470 8890 www.valopaa.com 5
Valopaa Ltd. Mäkelininkatu 15 90100 Oulu, Finland tel. +358 10 470 8890 www.valopaa.com6
Valopaa productsThe Valopaa products are highlighted in their reli-ability, energy efficiency, easy maintenance and lighting capabilities. We develop and produce all our products in Finland. Thus, they are developed to endure -40˚C temperatures and to satisfy all the requirements of the EU.
Reliability
In the product development of the Valopaa prod-ucts special attention was given to heat control, which is seen also in the structure of the products. The structures are developed to ensure low tem-peratures of the led components and drivers. This guarantees the long, even 30 years, operating life of the light fixtures. In addition, the Valopaa prod-ucts meet the necessary IP rating in terms of dust and water tightness. These properties substantially increase the life span and reliability of the Valopaa products.
Energy efficiency
The factors affecting energy efficiency of led light fixtures are selecting the best applicable led component, using the led component in an energy efficient manner, and the mechanical structure of the light fixture. Energy efficiency of a led compo-nent is better the cooler it is when it operates, and the lower operating currency is uses. In practice, product costs increase the more energy efficient the product is made; hence not all lighting needs are, at present, worth to be produced with the led technology. With good optical implementation of the led light fixture, the light loss is smaller than in the traditional light fixtures. E.g. the light loss from reflectors and shading of the light source are non-existent in led light fixtures that have good optical design.
Maintainable
The Valopaa products are developed on Valopaa´s own product platform. The led module endures in normal operating conditions for a long time, 20-30 years, as opposed to traditional light sources that need service every 2-4 years. (Here 1 year equals 4500 operating hours.)
The modular structure of the product platform ena-bles good maintainability, as individual led mod-ules and power supplies can be replaced, and thus the product life cycle becomes longer.
Lighting
The energy efficiency of a well-designed led light fixture increases the better aligned the light is, and the lesser is the amount of wasted light. Without additional optics, a led component typically pro-duces the light in a spherical (ball-shaped) align-ment. Usually different kind of lighting is sought after. Different optical solutions were created in the product development of the Valopaa products to generate different light patterns and desired light alignments. The optics of the Valopaa led light fixture decreases the amount of wasted light, and hence, is energy efficient and creates the desired kind of lighting.
Valopaa Ltd. Mäkelininkatu 15 90100 Oulu, Finland tel. +358 10 470 8890 www.valopaa.com 7
Light distributionWe develope new optical structures based on the customer feedback. The Eulumdat files of light dis-tribution can be downloaded from the Valopaa website. In the VP led light fixtures, every led module has its own optical lens that produces the desired distrubution of luminous intensity.
Lens V11. Developed especially for lighting of narrow streets. Best applicable for pedestrian streets and roads at residential areas, where light pollution is avoided.
Lens V12. Developed especially for lighting of wide streets. Asym-metric light distribution produces a more even light to the street and less glare. Well suitable also for lighting of parking areas.
Lens V8. Developed especially for general lighting. Thus, it is suitable to lighting of e.g. industrial halls, parking areas and underpasses. Light beam 90°, 600 cd/module.
Lens V9. Developed especially for general lighting. Lambertial light distribution, 200 cd/module.
Lens V7. Developed for use in spotlighting and accent lighting. Light beam 20°, 5000 cd/module.
Lens V10. Developed especially for accent and spotlighting. Light beam 35°, 2000 cd/module.
Lens V13. Developed especially for lighting of signs and bill-boards.
Lens V9B. Developed especially for ceiling lighting. Well suited also for general lighting, for indoors as well as outdoors. The lens has been designed to mini-mize glare when light fixtures are installed to low ceilings.
Lens V9C. Developed especially for general lighting, and is thus well suited for garden and park lighting. It is also well suited for retrofit installations. The lens generates very wide round light beam.
Optics for street lighting
Optics for general lighting
Optics for spotlighting
Specialty optics
Valopaa Ltd. Mäkelininkatu 15 90100 Oulu, Finland tel. +358 10 470 8890 www.valopaa.com8
VP 1301 M5
VP 1301 M6
VP 1301 M7
VP 1301 M8
VP 1301 M10
VP1301 M12
VP1301 M14
VP1301 M16
Operating voltage 230VAC/50Hz, protection class I
Input power (350 mA) (1) Useful quantity of light
46 W 55 W 64 W 73 W 92 W 110 W 128 W 146 W
4000 lm 4800 lm 5600 lm 6400 lm 8000 lm 9600 lm 11200 lm 12800 lm
Input power (700 mA) (2) Useful quantity of light
97 W 116 W 134 W 153 W
7000 lm 8400 lm 9800 lm 11200 lm
Power ratio According to standard EN 61000-3-2.
Colour temperature of the light
4100 K. Customer-specific colour temperatures possible, with limitations from the led manufacturer.
Encapsulation IP65 (installed)
Operating temperature -40…+40 °C (-40…+100 F)
Measurements, w x l x h 620 x 170 x 125 mm 630 x 170 x 125 mm 620 x 223 x 125 mm 630 x 223 x 125 mm
Weight 5 Kg 5,5 Kg 6,5 Kg 7 Kg
Materials Metalwork painted (stoved) aluminium and stainless steel
Colour White or grey, other colours possible
Fastening Ø 59-63 mm tube, vertical and horizontal installation, fine-tuning in 5° steps. Without hinge only horizontal installation. Wiring with spring coupling, overhead cables also possible.
Connection 3x4mm2 –o
Led lumen maintenance Typically less than 20%/100 000 h (1), 50 000 h (2)
VP 1301 led street lightThe product family of VP1301 street lights has been developed for street and slow traffic road lighting. The light fixture is suited for new installations, as well as for replacement of old light fix-tures. The light fixture can be installed to both horizontal and ver-tical shaft. The installation angle can be adjusted in 5° steps with the help of the hinge, which makes the light fixture fit to existing pole and shaft structures. Also available a stripped-down version without the hinge that can be installed only to horizontal shaft. The VP1301 product family includes light fixtures with the quantity of light ranging from 4000 lumen to 12800 lumen. In addition to street lighting, the light fixture is also suitable to area lighting.
Technical properties
There are two sizes available of the VP1301 led street light: versions M5 to M8 have their modules in one row, and version M10 and up have their modules in two rows.
LED
STRE
ET LIG
HTIN
G
Valopaa Ltd. Mäkelininkatu 15 90100 Oulu, Finland tel. +358 10 470 8890 www.valopaa.com 9
LED
STR
EE
T LI
GH
TIN
G
References
The VP1301 led light fixture is used in both street and area lighting. The pictures present the area lighting at an industrial estate in Oulu, Finland.
Street lighting is the most typical application for the VP1301 led light fixture. Street lighting at a residential area in Kiiminki, Finland.
Valopaa Ltd. Mäkelininkatu 15 90100 Oulu, Finland tel. +358 10 470 8890 www.valopaa.com10
VP1302 M2 VP1302 M3 VP1302 M4 VP1302 M5 VP1302 M6VP1302 M2+M6
VP1302 M6+M6
Operating voltage 230VAC/50Hz, protection class I
Input power 22 W 30 W 39 W 48 W 55 W 72 W 110 W
Useful quantity of light 1600 lm 2400 lm 3200 lm 4000 lm 4800 lm 1600 lm + 4800 lm
4800 lm + 4800 lm
Power ratio > 0,9c According to standard EN 61000-3-2.
Colour temperature ofthe light
4100 K. Customer-specific colour temperatures possible, with limitations from the led manufacturer.
Encapsulation IP65
Operating temperature -40…+40 °C (-40…+100 F)
Measurements, w x l x hVisor:Pole adaptor:
228 x 172 x 50
281 x 172 x 50
334 x 172 x 50
387 x 172 x 50
440 x 172x 50
h 420, Ø 80
Materials Metalwork painted (stoved) aluminium and stainless steel.
Colour Black, white or grey, other colours possible.
Fastening 60 mm tube, vertical (and horizontal) installation, fine-tuning in 5° steps. Adapter for 42mm tube.
Connection 3x4mm2 –o
Led lumen maintenance Typically less than 20%/100 000 h
VP 1302 led street lightThe product family of VP1302 street lights has been developed for street lighting, as well as area lighting. In addition, the light fixture is also suitable to e.g. lighting of sports tracks. The light fixture is available in both one-sided and two-sided versions, thus making it pos-sible to vary the light fixture type within the lighted area to carry out first-class lighting plans. The light fixture is suited for new installations, as well as for replacement of old light fixtures. The light fixture can be installed to an upright pole, the one-sided version also to horizontal shaft. The installation angle can be adjusted in 5° steps with the help of the hinge, which makes the light fixture fit to existing pole and shaft structures.
Technical properties
NB! Light fixtures are available in one-sided and two-sided versions, and in all different combinations in addition to those presented in the table above.
The VP1302 led street light fixture is available in one-sided andtwo-sided versions, and in all different combinations.
LED
STRE
ET LIG
HTIN
G
Valopaa Ltd. Mäkelininkatu 15 90100 Oulu, Finland tel. +358 10 470 8890 www.valopaa.com 11
LED
STR
EE
T LI
GH
TIN
G
References
The VP1302 led light fixture is used in both street and area lighting. Parking area P1 at the Oulu Airport has been illu-minated with this light fixture.
Valopaa Ltd. Mäkelininkatu 15 90100 Oulu, Finland tel. +358 10 470 8890 www.valopaa.com12
Led bridge light fixtures
The product family of the VP2221 led light fixtures is designed for use as a ceiling fixture in e.g. underpasses of walkways and roads, bridge undersides, parking garages, outdoor sheds and industrial buildings. The light fixture is mounted in buried laying, where the led light fixture is mounted to the slot in a way that only the exothermic panel and the light emitting lens of the led modules are left visible under the ceiling structure. All the other parts of the light fixture are situated inside the ceiling structure. The light fixture has very durable struc-tures.
Detailed information on this product can be found from page 18.
The product family of the VP2223 led light fixture is designed for use as a ceiling fixture in e.g. underpasses of walkways and roads, bridge undersides, tunnels, parking garages, outdoor sheds and industrial buildings. The light fixture is mounted in surface mounting to the ceiling structure. The front panel of the light fixture is hinged to the back part, which is fastened to the ceiling structure. This makes it easier to install the light fixture and make the electrical connections. Electrical cabling can be brought to the light fixtures either from two sides or from the back, and the cabling can be chained.
Detailed information on this product can be found from page 20.
VP2221 led light fixture
VP2223 led light fixture
LED
STRE
ET LIG
HTIN
G
Valopaa Ltd. Mäkelininkatu 15 90100 Oulu, Finland tel. +358 10 470 8890 www.valopaa.com 13
VP3241 M1 VP3241 M2 VP3241 M3
Operating voltage 230VAC/50Hz, protection class I
Input power 11 W 22 W 33 W
Useful quantity of light 700 lm 1400 lm 2100 lm
Power ratio > 0,9c
Colour temperature ofthe light
4100 K. Customer-specific colour temperatures possible, with limitations from the led manufacturer.
Encapsulation Led modules and driver min. IP65, light fixture when mounted IP33.
Connection 5x2,5mm2 –o–
Operating temperature -40…+40 °C (-40…+100 F)
Materials Metalwork anodised or painted (stoved) aluminium and stainless steel.
Colour White (front panel of the change kit), other colours possible.
Suitable signpost 1-2 lines 3-4 lines 5-6 lines
Led lumen maintenance Typically less than 20%/100 000 h
VP3241 led light fixture for signpostsThe lighting of signposts can be implemented in an energy efficient manner by using the modu-lar led technology of Valopaa Ltd. The VP3241 led light fixture has solutions for both new instal-lation sites and for modernization of old light fixtures. As for the modernization, Valopaa Ltd offers led change kits for Elektroskandia’s model H-8960 and Idman’s model 80722. The body of the light fixture is preserved, and the change kit substitutes the old grid, lamp and reflector, utilizing the points of attachment of the grid. The VP3241 led light fixture produces a more even light distribution than old mercury vapor lamps. Three different efficiencies available.
Technical properties
In the pictures above the VP3241 led change kit has been installed to Elektroskandia H-8960 body. At the test site, the light fixtures of the white signpost have two led modules, and those of the blue signpost have three led modules.
LED
STR
EE
T LI
GH
TIN
G
Valopaa Ltd. Mäkelininkatu 15 90100 Oulu, Finland tel. +358 10 470 8890 www.valopaa.com14
Led area light fixtures
LED
AR
EA
LIGH
TING
VP1302 led light fixture
The VP1302 street light fixture has been developed for street lighting, as well as area lighting. The light fixture can be equipped with different sized lighting modules (varying 2-6 led modules per lighting module), and it is available in one-sided and two-sided versions. Thus, the light fixture type can be varied within the lighted area to carry out first-class lighting plans, e.g. to parking areas. The light fixture can also be used to illuminate adjacent street and cycle paths from the same pole.
Detailed information on this product can be found from page 12.
VP3311 led light fixture
VP3311 led light fixtures have been developed to substitute halogen floodlights. By using different optical lenses the light fixture is well suitable for spotlighting, area lighting and street lighting. The VP3311 led light fixtures are of the same design family with VP1301 and VP1302 led light fixtures. Using all these light fixtures in the same lighting site one can create a uniform and pleasant lighting.
Detailed information on this product can be found from page 28.
VP1301 led light fixture
The VP1301 led light fixture is suitable for both street and area ligh-ting. It has been used in e.g. area lighting at industrial estates.
Detailed information on this product can be found from page 8.
Valopaa Ltd. Mäkelininkatu 15 90100 Oulu, Finland tel. +358 10 470 8890 www.valopaa.com 15
LED
AR
EA
LIG
HTI
NG
The Toivola youth house in Helsinki, Finland has VP1302 led light fixtures at their yard. The light fixtures endure vandalism well, so they are applicable in many different conditions.
The VP3311 led light fixture is suitable also for street lighting. It can be fastened e.g. to bridge structures.
References
Valopaa Ltd. Mäkelininkatu 15 90100 Oulu, Finland tel. +358 10 470 8890 www.valopaa.com16
VP2221 M1 VP2221 M2 VP2221 M3 VP2221 M4 VP 2221 M6
Operating voltage 230VAC/50Hz, protection class I
Input power 11 W 22 W 33 W 44 W 55 W
Useful quantity of light 700 lm 1400 lm 2100 lm 2800 lm 4200 lm
Power ratio > 0,9c According to stan-dard EN 61000-3-2.
Colour temperature ofthe light
4100 K. Customer-specific colour temperatures possible, with limitations from the led manufacturer.
Encapsulation IP 44 (led modules and driver min. IP65)
Operating temperature -40…+40 °C (-40…+100 F)
Measurements,w x l x h (mm)
S: 200 x 200 x 60 S: 400 x 200 x 60 600 x 430 x 56 600 x 430 x 56 600 x 430 x 56
L: 600 x 430 x 60 L: 600 x 430 x 60
Materials Metalwork painted (stoved) aluminium and stainless steel.
Colour Standard colour is grey, other colours possible.
Fastening Screw fastening to roof material.
Connection 5x2,5mm2 –o–
Led lumen maintenance Typically less than 20%/100 000 h.
VP 2221 led light fixtureThe product family of the VP2221 led light fixtures is designed for use as a ceiling fixture in e.g. un-derpasses of walkways and roads, bridge undersides, parking garages, outdoor sheds and industrial buildings. The light fixture is mounted in buried laying, where the led light fixture is mounted to the slot in a way that only the exothermic panel and the light emitting lens of the led modules are left visible under the ceiling structure. All the other parts of the light fixture are situated inside the ceiling structure.
Technical properties
AccessoriesVandalism shield. Installed on top of the led module and optical lens to protect against mischief and vandalism. Protects from spray paints and decreases the risk of mechanical strain and damage. UV protected polycarbonate. Seal and screws included in the package.
LED
CE
ILING
LIGH
TING
Valopaa Ltd. Mäkelininkatu 15 90100 Oulu, Finland tel. +358 10 470 8890 www.valopaa.com 17
VP2221 led light fixtures are used e.g. for lighting of underpasses.
LED
CE
ILIN
G L
IGH
TIN
G
References
VP2221 led light fixtures are suitable also for lighting at petrol stations.
At the Oulu highway (E75) all the bridge undersides are illuminated with VP2221 and VP2223 led light fixtures.
Valopaa Ltd. Mäkelininkatu 15 90100 Oulu, Finland tel. +358 10 470 8890 www.valopaa.com18
VP2223 M1 VP2223 M2 VP2223 M3 VP2223 M4
Operating voltage 230VAC/50Hz, protection class I
Input power 11 W 22 W 33 W 44 W
Useful quantity of light 700 lm 1400 lm 2100 lm 2800 lm
Power ratio > 0,9c
Colour temperature ofthe light
4100 K. Customer-specific colour temperatures possible, with limitations from the led manufacturer.
Encapsulation IP 44 (led modules and driver min. IP65)
Operating temperature -40…+40 °C (-40…+100 F)
Measurements, w x l x h 200 x 200 x 47 400 x 200 x 47 400 x 200 x 47 400 x 400 x 47
Materials Metalwork painted (stoved) aluminium and stainless steel.
Colour Black, grey and white, other colours possible.
Fastening Screw fastening to ceiling structure
Connection 5x2,5mm2 –o–
Led lumen maintenance Typically less than 20%/100 000 h
VP 2223 led light fixtureThe product family of the VP2223 led light fixture is designed for use as a ceiling fixture in e.g. under-passes of walkways and roads, bridge undersides, tunnels, parking garages, outdoor sheds and industrial buildings. The light fixture is mounted in surface mounting to the ceiling structure.
Technical properties
The VP2223 led light fixture is available in three different colors and in four different efficiencies and sizes. Thelight fixtures in the pictures are equipped with vandalism shields (available as accessories).
AccessoriesVandalism shield. Installed on top of the led module and optical lens to protect against mischief and vandalism. Protects from spray paints and decreases the risk of mechanical strain and damage. UV protected polycarbonate. Seal and screws included in the package.
The front panel of the light fixture is hinged to the back part, which is fastened to the ceiling structure. This makes it easier to install the light fixture and make the electrical connections. Electrical cabling can be brought to the light fixtures either from two sides or from the back, and the cabling can be chained.
LED
CE
ILING
LIGH
TING
Valopaa Ltd. Mäkelininkatu 15 90100 Oulu, Finland tel. +358 10 470 8890 www.valopaa.com 19
VP2321 M12 VP2221 M6 (with es-series leds)
Operating voltage 230VAC/50Hz, protection class I
Input power 110 W 55 W
Useful quantity of light 10800 lm 5400 lm
Power ratio According to standard EN 61000-3-2.
Colour temperature ofthe light
4100 K. Customer-specific colour temperatures possible, with limitations from the led manufacturer.
Encapsulation IP 44 (led modules and driver min. IP65)
Operating temperature -40…+40 °C (-40…+100 F)
Measurements, w x l x h 590 x 390 x 80 600 x 430 x 60
Materials Metalwork painted (stoved) aluminium and stainless steel.
Colour Standard colour is white, other colours possible
Fastening Screw fastening to roof material
Connection 5x2,5mm2 –o–
Led lumen maintenance Typically less than 20%/100 000 h
VP2321 led light fixtureThe VP2221 and VP2321 led light fixtures are designed for use as a ceiling fixture in e.g. under-passes of walkways and roads, bridge undersides, outdoor sheds and industrial buildings. The light fixtures are mounted in buried laying, where the led light fixture is mounted to the slot in a way that only the exothermic panel and the led modules are left visible under the ceiling struc-ture. All the other parts of the light fixture are situated inside the ceiling structure. Also available with the light fixtures is a case that enables surface-mounting of the light fixture.
Technical properties
The VP2321 led light fixtures are used e.g. at petrol stations.
AccessoriesInstallation case. The light fixtures can be installed in surface-mounting with the help of this installation case.
LED
CE
ILIN
G L
IGH
TIN
G
Valopaa Ltd. Mäkelininkatu 15 90100 Oulu, Finland tel. +358 10 470 8890 www.valopaa.com20
VP2222 M3 VP2222 M5 VP2222 M6
Operating voltage 230VAC/50Hz, protection class I
Input power 33 W 46 W 55 W
Useful quantity of light 2700 lm 4500 lm 5400 lm
Power ratio > 0,9c According to standard EN 61000-3-2.
Colour temperature ofthe light
4100 K. Customer-specific colour temperatures possible, with limitations from the led manufacturer.
Encapsulation Led modules and driver min. IP65, light fixture IP34
Operating temperature -40…+40 °C (-40…+100 F)
Measurements, w x l x h 885 x 165 x 50 1300 x 165 x 50 1300 x 165 x 50
Materials Metalwork painted (stoved) aluminium and stainless steel.
Colour Standard colour is white, other colours possible.
Fastening Screw fastening to roof or rail.
Connection 5x2,5mm2 –o–
Led lumen maintenance Typically less than 20%/100 000 h.
VP 2222 led ceiling light fixtureVP2222 led light fixtures have been developed to be used as a ceiling light fixture in cold roofedspaces or industrial spaces, where changing e.g. fluorescent lamps is difficult and might interruptproduction. The light fixtures are suited for new installations, as well as for replacement of old lightfixtures. The light fixture is supplied with a power cord that has a grounded electric plug. The cus-tomer can specify the length of the power cord according to their needs.
Technical properties
The 5 and 3-module versions of VP2222.
LED
CE
ILING
LIGH
TING
Valopaa Ltd. Mäkelininkatu 15 90100 Oulu, Finland tel. +358 10 470 8890 www.valopaa.com 21
LED
CE
ILIN
G L
IGH
TIN
G
References
VP2222 led light fixtures have been developed for industrial lighting ,to be used in cold roofed spaces. At the Oulu Region, it’s been used e.g. in lighting at a loading platform.
Valopaa Ltd. Mäkelininkatu 15 90100 Oulu, Finland tel. +358 10 470 8890 www.valopaa.com22
VP2231
Operating voltage 230VAC/50Hz, protection class I
Input power 11 W
Useful quantity of light 700 lm
Power ratio > 0,9c
Colour temperature ofthe light
4100 K. Customer-specific colour temperatures possible, with limitations from the led manufacturer.
Encapsulation IP 44 (led modules and driver min. IP65)
Operating temperature -40…+40 °C (-40…+100 F)
Measurements, w x l x h 180 (245) x 165 x 65 mm
Materials Metalwork anodised aluminium and stainless steel
Colour Standard colour is aluminium, other colours possible
Fastening Screw fastening to roof or wall material
Connection 5x2,5mm2 –o–
Led lumen maintenance Typically less than 20%/100 000 h
VP2231 led light fixtureThe VP2231 led light fixtures have been developed to be used as a ceiling light fixture and architectural light fixture. The light fixtures are suited for new installations, as well as for replacement of old light fixtures. The light fixtures can be chained in triphase. The VP2231 led ceiling light fixture has one VPM2 led module, to which different optical distributions can be used.
Technical properties
LED
CE
ILING
LIGH
TING
Valopaa Ltd. Mäkelininkatu 15 90100 Oulu, Finland tel. +358 10 470 8890 www.valopaa.com 23
The VP2231 led light fixture has been used in lighting of a wall surrounding the Raatti sports arena in Oulu, Finland.
LED
CE
ILIN
G L
IGH
TIN
G
References
Valopaa Ltd. Mäkelininkatu 15 90100 Oulu, Finland tel. +358 10 470 8890 www.valopaa.com24
VP 3111 M1 VP 3111 M2
Operating voltage 230VAC/50Hz, protection class I
Input power 11 W 22 W
Useful quantity of light 700 lm 1400 lm
Power ratio > 0,9c
Colour temperature ofthe light
4100 K. Customer-specific colour temperatures and colours possible, with limitations from the led manufacturer.
Encapsulation Led modules and driver min. IP65
Operating temperature -40…+40 °C (-40…+100 F)
Measurements, w x l x h 120 x 70 x 70 180 x 110 x 90
Weight 1 kg 1,5 kg
Materials Metalwork anodised or painted aluminium, and stainless steel
Colour Black, white, other colours possible
Fastening 60 mm tube (tube not included in the standard package)
Connection 3x2,5mm2 –o–
Led lumen maintenance Typically less than 20%/100 000 h
VP 3111 led spotlightThe product family of VP3111 led spotlights has been developed for spotlighting, and lighting ofpedestrian paths. The VPM1 led module that was designed for the Valopaa street light fixtures is used also in the VP3111 product family, and thus, all different distributions of luminous intensity are available for these light fixtures as well. The spotlights can be used to liven up courtyards, parks, buildings and other objects and targets. With the different light distributions it is possible to build safe pedestrian paths and novel lighting to courtyards. The light source is rotatable, thus it can be turned at the pole top, and the light can be aligned as needed.
The VP3111 led spotlight is available in one-module and two-module versions. The led modules in the VP3111 M2 can be positioned in parallel to generate higher luminous efficiency, or vertically different ways to generate a wider area of illumination. Led spotlights in white color are ideal for snow and ice building.
Technical properties
VP 3111 M1 VP3111 M2
The VP3111 led spotlight is fastened to a tube with 60 mm diameter. The electricity is brought to thelight fixture through the pole. The connection device is situated inside the pole. The structure of theled light fixture transfers the heat away from the leds, and the structure is dust and water proof.
LED
SPO
TLIGH
TING
Valopaa Ltd. Mäkelininkatu 15 90100 Oulu, Finland tel. +358 10 470 8890 www.valopaa.com 25
LED
SP
OTL
IGH
TIN
G
References
VP 3111 led spotlights are suitable for lighting of e.g. different objects and walking paths. With different optical lenses one can highlight single objects, create general lighting or illuminate paths.
The led modules can be rotated to different angles according to the illuminated object or area. Hence the light fixture is very versatile and easily adapted to changing lighting needs.
Valopaa Ltd. Mäkelininkatu 15 90100 Oulu, Finland tel. +358 10 470 8890 www.valopaa.com26
VP 3311 M2 VP3311 M6 VP 3311 M12
Operating voltage 230VAC/50Hz, protection class I
Input power 22 W 55 W 110 W
Useful quantity of light 1800 lm 5400 lm 10800 lm
Power ratio > 0,9c According to standard EN 61000-3-2.
Colour temperature of the light
4100 K. Customer-specific colour temperatures and colours possible, with limitations from the led manufacturer.
Encapsulation IP65
Operating temperature -40…+40 °C (-40…+100 F)
Measurements, w x l x h(height: without/with shaft)
235 x 173 x 115/175 (mm) 425 x 173 x 115/175 (mm) 425 x 223 x 115/175 (mm)
Materials Metalwork painted (stoved) aluminium and stainless steel
Colour Grey, other colours possible
Fastening Screw fastening to ceiling, wall or pole
Connection 3x4mm2 –o–
Led lumen maintenance Typically less than 20%/100 000 h
VP3311 led spotlightsVP3311 led spotlight fixtures have been developed for spotlighting and area lighting. The lightfixtures can be used as working lighting, or to liven up courtyards, parks, buildings and other objects and targets. They are installed in srew fastening to ceiling, wall or poles. In addition, their installation angle can be adjusted in a continuous manner so that the light can be aligned as needed. The light fixtures can also be used in street lighting if they are installed above streets to wire ropes or bridge structures.
The led spotlight fixtures are suited to both indoor and outdoor use. Available also with readyinstalled power cable, which makes the light fixtures easy to install and move according to needs, e.g. at construction sites.
Technical properties
In addition to standard versions, the VP3311 led spotlight fixture is available with 5-12 modules for optimizing the energy usage in a specific lighting site.
LED
SPO
TLIGH
TING
Valopaa Ltd. Mäkelininkatu 15 90100 Oulu, Finland tel. +358 10 470 8890 www.valopaa.com 27
LED
SP
OTL
IGH
TIN
G
References
The VP3311 led spotlights are used in the outdoor lighting of the Torpparimäki school in Helsinki, Finland. The light fixtures are fastened to the poles surrounding the school building.
Valopaa Ltd. Mäkelininkatu 15 90100 Oulu, Finland tel. +358 10 470 8890 www.valopaa.com28
VPM1 VPM2
Current Nominal 350 mA, max 1 A
Protection class Class I until 450 VDC, and SELV
Input power Typical 8,5 W
Useful quantity of light 700 lm (when temperature of the body 60 °C/120 F)
Led connections 8 leds series-connected
Led lumen maintenance Typically less than 20%/100 000 h
Colour temperature ofthe light
4100 K. Customer-specific colour temperatures and colours possible, with limitations from the led manufacturer
Encapsulation min. IP65
Operating temperature -40…+50 °C (-40…+120 F)
Measurements, w x l x h 70 x 52 x 55 70 x 54 x 20
Materials Body recycled aluminium, fasteners stainless steel, lens UV-protected PC or PMMA
Body aluminium, fasteners stainless steel, lens UV-protected PC or PMMA
Colour Black, white. Painting with different colours possible.
Anodized aluminium
Fastening Alternatives from fixed installationto rotatable installation.
Screw fastening
VPM led modules
Technical properties
VPM 1VPM 2
Note! The standard versions of the led modules include 8 high power leds. The technical properties in the table above are based on eight leds. The modules can also be equipped with six, four or two leds for different brightness levels. In these cases the electrical values change accordingly.
The VPM led modules comprise high class leds, optics for light distribution and a firm aluminium body. The VPM1 led module has cooling ribs to ensure heat transfer from the leds to the ambient air. The VPM2 led module is designed to be used with e.g. an aluminium body of a light fixture to ensure sufficient cooling.
The VPM led modules have been developed for street light fixtures, but they are also suited for a wide variety of lighting needs both indoors and outdoors. The structures of the led modules are dust and water proof. Therefore, they can be used in all kind of locations that are situated above water-level and have sufficient ventilation. The led modules have plenty of product applications from spot-lighting to general lighting. Different applications are generated by using different optics for the light distribution and an appropriate fastening to a light fixture or other assembly.
LED
MO
DU
LES
Valopaa Ltd. Mäkelininkatu 15 90100 Oulu, Finland tel. +358 10 470 8890 www.valopaa.com 29
Modernization of light fixturesArchitectural light fixtures, used in urban areas and downtown streets, can be modernized with the VPM led module technology. The existing infrastructure can be preserved when new struc-tures are developed inside the light fixture’s covers. With Valopaa’s solution, each modernized light fixture will have 1-16 led modules. In addition optical lenses and the positioning of the led modules are chosen based on the desired lighting pattern and lighting design.
Modernization of a Cupola light fixture at a pilot site.
LED
MO
DU
LES
By modernizing the historical, protected luminaires, the appearance of an urban area can be preserved. At the same time substantial energy savings are achieved. The picture presents an example of modernization design of a light fixture used in many central European countries.
Valopaa Ltd.
Mäkelininkatu 1590100 Oulu, Finlandtel. 010 470 [email protected]
Sales
International salesTapani Raappanapuh. 010 470 [email protected]
Product ManagerIlkka Kaltiolapuh. 010 470 [email protected]
ODM project salesToivo Vilmipuh. 010 470 8891