Printing - Safeconsafecon.co.in/.../BAMULLER/Druckprospekt_EN_Web.pdf · 2013-10-08 ·...

ii,52 ii,56 ii,58 ii,60 ii,62 ii,64 ii,66 ii,68 ii,70 ii,72 ii,74 ii,76 ii,78 ii,80 ii,82 ii,84 ii,86 ii,88 ii,90 ii,98ii,54ii,52 ii,56 ii,58 ii,60 ii,62 ii,64 ii,66 ii,68 ii,70 ii,72 ii,74 ii,76 ii,78 ii,80 ii,82 ii,84 ii,86 ii,88 ii,90 ii,98ii,54 iiiii,52 ii,56 ii,58 ii,60 ii,62 ii,64 ii,66 ii,68 ii,70 ii,72 ii,74 ii,76 ii,78 ii,80 ii,82 ii,84 ii,86 ii,88 ii,90 ii,98ii,54 www.baumueller.de

Printing1000 2000 3000 4000 5000 6000 7000 8000 9000 10000

800 825 850 875 900 925 950 975 1000

be in motion be in motion be in motion be in motion

be in motion be in motion

2 2,02 2,04 2,06 2,08 2,10 2,12 2,14 2,16 2,18 2,20 2,22 2,24 2,26 2,28 2,30 2,32 2,34 2,36 2,38 2,40 2,42 2,44 2,46 2,48 2,50 2,52 2,56 2,58 2,60 2,62 2,64 2,66 2,68 2,70 2,72 2,74 2,76 2,78 2,80 2,82 2,84 2,86 2,88 2,90 2,982,542,52 2,56 2,58 2,60 2,62 2,64 2,66 2,68 2,70 2,72 2,74 2,76 2,78 2,80 2,82 2,84 2,86 2,88 2,90 2,982,542 2,02 2,04 2,06 2,08 2,10 2,12 2,14 2,16 2,18 2,20 2,22 2,24 2,26 2,28 2,30 2,32 2,34 2,36 2,38 2,40 2,42 2,44 2,46 2,48 2,50 2,982,50 2,982,50

1000987 988 989 990 991 992 993 994 995

There are up to 1000 drives in a newspaper printing press. A lot of know-how is behind this:the innovative direct drives from Baumüller. With our diagnostic and remote maintenance system – BAUDIS – we see to it that you don‘t get your Sunday paper on Monday.

840 860 880 900 920 940 960 980

2,52 2,56 2,58 2,60 2,62 2,64 2,66 2,68 2,70 2,72 2,74 2,76 2,78 2,80 2,82 2,84 2,86 2,88 2,90 2,982,54 32,52 2,56 2,58 2,60 2,62 2,64 2,66 2,68 2,70 2,72 2,74 2,76 2,78 2,80 2,82 2,84 2,86 2,88 2,90 2,982,54 www.baumueller.de2,60 2,62 2,64 2,66 2,68 2,76 2,86 2,982,58 2,982,58 2,60 2,982,60 2,62 2,982,62 2,64 2,982,64 2,66 2,982,66 2,68 2,982,68 2,70 2,982,70 2,72 2,982,72 2,74 2,982,74 2,76 2,982,76 2,78 2,982,78 2,80 2,982,80 2,82 2,982,82 2,84 2,982,84 2,86 2,982,86 2,88 2,982,88

987 988 989 990 991 992 993 994 995

Baumüller – your competent partner in the printing industry

From components to the complete installation

Baumüller is a leading supplier of drive systems for printing presses: from cut-sheet and label printers

to newsprint. Baumüller is a participant not only in the actual printing process but also in the prepress

and post-production stages. Long years of collaboration with the machine manufacturers has allowed

Baumüller to provide all sectors of the printing industry with innovative and optimized drive solutions.

Worldwide service is naturally part of the package. With over 40 branches worldwide Baumüller is always

near, regardless of where your machine is installed. Maintenance and service logistics are available on

site at all times.

Machine-building for the printing industry depends on unique solutions. Take advantage of the flexibility

and innovative power provided by industry experts from Baumüller to create customized drive concepts for

your machines and installations.

Sheetfed printing

Label printing

Form printing

Flexo-printing

Digital printing

Commercial printing

Newspaper printing

Post-processing

In-line finishing

1001 1002 1003 1004 1005

Decades of experience

Leading manufacturers of printing presses are among the clients of Baumüller. For decades

Baumüller has been working together with its customers to plan, develop, design and

manufacture drive systems und drive solutions for the printing industry. The reliability,

robustness and high availability of the drive systems have made Baumüller into a competent

partner of printing press manufacturers.

4 4,02 4,04 4,06 4,08 4,10 4,12 4,14 4,16 4,18 4,20 4,22 4,24 4,26 4,28 4,30 4,32 4,34 4,36 4,38 4,40 4,42 4,44 4,46 4,48 4,50 4,52 4,56 4,58 4,60 4,62 4,64 4,66 4,68 4,70 4,72 4,74 4,76 4,78 4,80 4,82 4,84 4,86 4,88 4,90 4,984,544,52 4,56 4,58 4,60 4,62 4,64 4,66 4,68 4,70 4,72 4,74 4,76 4,78 4,80 4,82 4,84 4,86 4,88 4,90 4,984,54

Individual complete solutions

Baumüller Anlagen-Systemtechnik is the system vendor of the Baumüller Group. As a system integrator and expert in

the field of single-drive technology we are a supplier of complete automation solutions for the whole printing industry.

Baumüller Anlagen-Systemtechnik offers you the following to automate your printing press:

Planning, development, project design

Hardware and software configuration, supported by powerful PrintLib technology functions

Installation, commissioning

Training

Worldwide technical support

System service, including maintenance and retrofit concepts

As a customer-oriented technical service provider, Baumüller Anlagen-Systemtechnik ensures the integration

of all your drive and control technology into an open and flexible system.

Your benefits:

Modular, flexible machine concepts that can be modified and extended at any time

Increased process quality due to high precision and modern real-time field bus systems

A clear reduction in energy costs due to the use of direct drive technology and energy-efficient systems solutions

Increased availability of the machine due to low-maintenance drive elements

Increased production safety due to the use of the leading BAUDIS remote maintenance system

A comprehensive range of services over the entire service life of your plant and machinery with our long-term

systems service.

International presence with 24-hour service hotline

4,52 4,56 4,58 4,60 4,62 4,64 4,66 4,68 4,70 4,72 4,74 4,76 4,78 4,80 4,82 4,84 4,86 4,88 4,90 4,984,54 54,52 4,56 4,58 4,60 4,62 4,64 4,66 4,68 4,70 4,72 4,74 4,76 4,78 4,80 4,82 4,84 4,86 4,88 4,90 4,984,54 www.baumueller.de

Sheetfed printing

Accurate controls to ensure synchronous processes and consistently high quality

Whether you are using feeder drives, main drives, directly driven plate cylinders or delivery systems - your use of

the corresponding Baumüller automation technology will easily allow you to handle tasks efficiently and accurately.

Our DSD- and DSC-series servo motors are predestined for these tasks. In combination with the converters of the

b maXX 3000, b maXX 4000 and b maXX 5000 series, this results in maximum efficiency - from system design to

energy consumption.

The modular control technology that allows us to equip individual drives with a so-called drive PLC also provides

flexible and cost-optimized solutions to complex tasks.

The accurate register positioning of the individual plate cylinders

is particularly important for the printing process. Well-known

manufacturers of sheet-printing systems place their trust in

Baumüller‘s energy-efficient direct drives.

The DST high-torque motors are optimally integrated into the

machine design.

The lack of mechanical elements makes for compact machine

design, while at the same time reducing the number of high-

maintenance components.

Additional functions such as print length adjustment can also

be provided.

3000 4000 5000

6 6,02 6,04 6,06 6,08 6,10 6,12 6,14 6,16 6,18 6,20 6,22 6,24 6,26 6,28 6,30 6,32 6,34 6,36 6,38 6,40 6,42 6,44 6,46 6,48 6,50 6,52 6,56 6,58 6,60 6,62 6,64 6,66 6,68 6,70 6,72 6,74 6,76 6,78 6,80 6,82 6,84 6,86 6,88 6,90 6,986,546,52 6,56 6,58 6,60 6,62 6,64 6,66 6,68 6,70 6,72 6,74 6,76 6,78 6,80 6,82 6,84 6,86 6,88 6,90 6,986,54

Use Baumüller automation systems to implement a wide

range of machine concepts. Economical, state-of-the-art

technology.

Our drives fulfill the following requirements:

Highest accuracy of phase synchronization

User-oriented solutions for technology functions:

- Phase synchronization

- Electronic drive

- Dynamic positioning

- Cam discs

- Winders and unwinders

- Register controls

- Cam discs

- Pilgrim step

- Winders and unwinders

Communication by real-time field bus system

Whether you are printing newspapers or illustrations,

your automation system requirements will be very

high. Accurate register positioning is just as important

as the tension control system.

Systems of this size and complexity are difficult to test

at the factory. It helps to have machine modules that

can be individually pre-tested and assembled on the

customer‘s premises with minimal effort.

Drives ranging from 4 kW to 300 kW can be used for

this purpose. This allows you to profit from our wide

product range. From DSD- and DSC-series alternating

current servo-motors to DS-and DA-series alternating

current main drives and even high-torque motors all

provide perfect drive technology.

In terms of energy efficiency Baumüller provides energy

feedback units, which perfectly complement the

comprehensive portfolio of servo motors.

Rotary printing Highest precision and production reliability,

even with over 200 axes

Flexo-printing/label printingFlexibility and diversity for the entire industry


BPLSBaumüller Process Control System The modern Baumüller process control systems are made according to the demands of a flexible production process and ergonomics conditions As a link between the automation level, operation level and the production planning systems BPLS enables the safe and easy management of complex processes in pressure ranges. Ideal applications would be the visualization, operation and administration of production and machine parameters for accidents, sheet feed and newspaper printing machines. As an economical solution the modification comfortably adapts the existing printing machines to the market demands.

Your engineering benefit Flexible and expandable according to your requirements

Universal system solutions from the command level through the controls

to the drive solutions

Interface to external systems, e.g. colour thickness control

Future oriented PC-based technology

Economical solutions for modifications

Your benefit in the production Comfortable, intuitive and ergonomical operation

Accessibility to MES- und ERP-Systems

Presetting of colour zones through the importing of CIP3 Data

Preparation for the following production while the current production continues

uninterrupted allows for shorter set up times

Increase in productivity and more reliable and also availably for older printing machines

8 8,02 8,04 8,06 8,08 8,10 8,12 8,14 8,16 8,18 8,20 8,22 8,24 8,26 8,28 8,30 8,32 8,34 8,36 8,38 8,40 8,42 8,44 8,46 8,48 8,50 8,52 8,56 8,58 8,60 8,62 8,64 8,66 8,68 8,70 8,72 8,74 8,76 8,78 8,80 8,82 8,84 8,86 8,88 8,90 8,988,548,52 8,56 8,58 8,60 8,62 8,64 8,66 8,68 8,70 8,72 8,74 8,76 8,78 8,80 8,82 8,84 8,86 8,88 8,90 8,988,54

BAUDISPlatform-independent architecture

and Internet-based operation

System diagnostics via intranet and Internet

Easy integration into system-dependent control centers

Platform-independent presentation of diagnostic data

Modular construction with libraries

Expandability and flexible adaptation

to the needs of other industries

Easy and quick creation of overviews for system diagnosis

Drive-integrated diagnostics to PC-based diagnostics

Frequency response analysis and automatic regulator

and filter settings

Preventative diagnostics via the comparison of recorded

frequency responses

Software-supported drive optimization

Analysis with the synthesis of digital filters that are specially

configured to the regulation problem

Signal analysis of the path of regulation with automated

regulator configuration in regulated and controlled operation

BAUDIS – Diagnostic and remote monitoring system


Integrated help and

maintenance support information

Quick help when drive system signals

Easier localization of fault causes

Access to documentation for operating and

replacement instructions for system components

Management of system specific and

customer-specific additions to the help

and information system

Additional functions

Graphic evaluation of logs for finding

fault frequencies

Secure backup of a single drive or all the

drives in a system

Quick uploading and downloading of

data records for one or more drives

simultaneously

Configurable routine monitoring of important

operating parameters of the drive system

Integrated oscilloscope

Graphic display of various characteristics of

the drive system

Online and offline display of captured values

Cursor function for the determination

of exact values

Averaging of characteristics using mathematical

functions, such as differencing and mean value

calculation

10 10,02 10,04 10,06 10,08 10,10 10,12 10,14 10,16 10,18 10,20 10,22 10,24 10,26 10,28 10,30 10,32 10,34 10,36 10,38 10,40 10,42 10,44 10,46 10,48 10,50 10,52 10,56 10,58 10,60 10,62 10,64 10,66 10,68 10,70 10,72 10,74 10,76 10,78 10,80 10,82 10,84 10,86 10,88 10,90 10,9810,5410,52 10,56 10,58 10,60 10,62 10,64 10,66 10,68 10,70 10,72 10,74 10,76 10,78 10,80 10,82 10,84 10,86 10,88 10,90 10,9810,54

Reliability of Printing Machines

Service and Preventive Maintenance

Maintenance of Machine Value

Retrofit Solutions

Lifecycle of printing machines

From transport and installation to logistics and the

production of special components and from systems

service to retrofits, our customers profit from our

comprehensive range of services.

When it comes to retrofitting machines and drives,

Baumüller supports companies from the project design

phase to commissioning and subsequent maintenance.

Thus the productivity of existing plant and machinery

can be increased, maximizing machine availability.

By bundling these services together with Nürmont,

the Baumüller Group can offer customers in the

graphics industry a wide range of products and

services from a single source, providing economic,

sustainable and optimally efficient complete solutions

throughout the service life of your system.

Electrotechnical audit with thermography and

vibration measuring

Preventative maintenance and condition monitoring

Repairs and general reconditioning

Training for operators

24/7 service hotline

Spare parts service

Optimization of your system

Retrofits for modernization and to increase productivity

System service and modernization

System service and retrofit

Our long-term systems service comprises many building blocks:

Your benefits:

Comprehensive one-stop system service

Worldwide 24/7 service hotline

We look after your plant and machinery throughout their service life

Guaranteed production and increased productivity by using efficient retrofit packages


References – installations worldwide

Our components and automation solutions make sure that high quality printing products are produced

every day – at more than 1,000 installations worldwide.

With our service organization with offices in more than 40 countries we contribute to the high availability

of the machines at our customers.

More than 30,000 axes worldwide can not be wrong!

12 12,02 12,04 12,06 12,08 12,10 12,12 12,14 12,16 12,18 12,20 12,22 12,24 12,26 12,28 12,30 12,32 12,34 12,36 12,38 12,40 12,42 12,44 12,46 12,48 12,50 12,52 12,56 12,58 12,60 12,62 12,64 12,66 12,68 12,70 12,72 12,74 12,76 12,78 12,80 12,82 12,84 12,86 12,88 12,90 12,9812,5412,52 12,56 12,58 12,60 12,62 12,64 12,66 12,68 12,70 12,72 12,74 12,76 12,78 12,80 12,82 12,84 12,86 12,88 12,90 12,9812,54

18 19 20 21 22 23 24 1 2 3 4 5 6 7

362 363 364

36518 19 20 21 22 23 24 1 2 3 4 5 6 7

362 363 364 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365

18 19 20 21 22 23 24365

AssemblyTechnical support worldwide

CommissioningElectrical installation

Sheet metal solutions

Hardware & software engineeringProject management

Planning & development

Expansion of existing systems

Training

Control cabinet design

MaintenanceService

Automation solutions

RepairRetrofit

Components

You can contact us on our Service Hotline +49 (0)911 5432 - 133 twenty-four hours a day on 365 days of the year.

Cooperation with development partners, who contribute to the entire solution in a system-oriented way,

is a precondition if you want to concentrate on your own competencies in the field of machine building.

If your automation partner supports you during the realization of your system concept, you receive the

development, project management and the optimal adaptation of a drive solution from one source.

From the plastics to the packaging industry, from the textile to the printing industry, Baumüller is an innova-

tive system partner of the capital goods industry. We provide solutions for automation, electrical and drive

engineering throughout the entire life cycle of a plant.

It goes without saying that in addition to our complete package consisting of engineering, installation,

commissioning and services, we offer customer service with perfect coverage – namely anywhere in the

world and at any time.

We are the partner for your success.

Automation solutions by Baumüller


Planning & development

Baumüller is an innovative development partner of machine

builders. Already in the early product development stages,

we concept and develop an economical and technologically

future-proof plant together with you.

Project management

Our project leaders ensure the implementation of turnkey

equipment.

Hardware & software engineering

From the dimensioning via cabling to air conditioning of your

control cabinets, we design your hardware taking account of

all design and manufacturing options that are technologically

innovative, user-oriented and as economical as possible.

Control cabinet design & sheet metal solutions

From sheet pieces to completely wired control cabinets,

Baumüller has realized individual solutions for well-known

machine and plant builders as well as for medical and electro

engineering for years. In order to meet the needs and require-

ments of the capital goods industry of demand-oriented prod-

ucts, as a competent system partner we offer everything from

one source. From planning to construction, over sheet metal

production and series wiring up to assembly and installation

on site – worldwide. Our control cabinet design is certified

according to UL 508a.

Electrical installation & Commissioning

You construct the mechanics of your system, we design and

install the electronics. Whether inhouse or worldwide at your

customer‘s site – with our software solutions and drive techno-

logies we set your machine ideas in motion. For the worldwide

installation and commissioning of your systems, we always take

account of the respective country-specific standards.

Expansion of existing systems

Innovative and customer-specific products require state-of-

the-art production methods and machine functions. Using an

adaptation or expansion of your existing machine architecture,

you quickly achieve an increased flexibility and availability of

your systems – while allowing you to estimate your expenses

and manage your investments.

Technical support worldwide

Whether it is remote diagnosis and remote maintenance using

telecommunication or the Internet, through our 24-hour hotline

or our contact partners at branch offices onsite in more than 40

locations worldwide – the experts from Baumüller provide full

explanations to all your questions concerning automation and

drive solutions.

Assembly

The Nürmont Installations GmbH & Co. KG has over twenty

years of experience in the field of assembly and relocation of

machines and plants. Nürmont operates globally and offers

solutions from one source. Beginning with project planning up

to after sales service – also as a main contractor – Nürmont

covers all relevant services in the assembly and relocation field.

Together with logistics, special part manufacturing and electrical

assembly, as well as commissioning and service support.

Training

Only with well-trained employees you can quickly respond to

challenges. We offer training onsite and in our training center.

On the basics of electrical drive engineering, on maintenance

of switching stations, controllers and drives, and on selective

troubleshooting in the broader range of printing technology

and drive engineering. In cooperation with you, we create a

flexible training program that is specifically tailored to the

training needs of your employees.

Service

The correct repair and spare parts must instantly be available

to immediately remedy a failure of your system. In cooperation

with you, we develop an extensive service plan and make a

technically sound and cost-optimized selection of components

that you should keep on hand. We ensure the functional state

of your stock of spare parts and deliver components that are

missing in an emergency – day and night via express.

Maintenance

A professionally maintained machine means safety. Safeguarded

production and safety for your employees. Our Condition Moni-

toring Systems, for example, recognize in advance possible

causes of failure and increase the availability of your machine.

Repair

The extensive experience, our know-how, as well as the tech-

nical equipment of our worldwide subsidiaries are the basis

for high quality repair of your electronical units and electri-

cal machines, from exchanging broken parts up to general

overhaul – independent of the manufacturer.

Retrofit

We retrofit existing systems with up-to-date drive systems,

control cabinets and user interfaces, so that your system can exe-

cute a failure-free, state-of-the-art production. With a retrofit of

your existing machine architecture, you are able to achieve higher

system flexibility and availability in a very short time.

14 14,02 14,04 14,06 14,08 14,10 14,12 14,14 14,16 14,18 14,20 14,22 14,24 14,26 14,28 14,30 14,32 14,34 14,36 14,38 14,40 14,42 14,44 14,46 14,48 14,50 14,52 14,56 14,58 14,60 14,62 14,64 14,66 14,68 14,70 14,72 14,74 14,76 14,78 14,80 14,82 14,84 14,86 14,88 14,90 14,9814,5414,52 14,56 14,58 14,60 14,62 14,64 14,66 14,68 14,70 14,72 14,74 14,76 14,78 14,80 14,82 14,84 14,86 14,88 14,90 14,9814,54

1The more intuitive the engineering, the more efficient will be the automation solution. ProMaster allows you to introduce new machine concepts to the marketplace more quickly and you systematically increase the added value of your machine.

PROPROG ProSafety ProDrive ProCAM ProEtherCAT

Technology Motion Control Motion Control Safety

Configuration management

XML

Tools

Reuse

Knowledge

Added value

ProMaster — an integrated engineering Framework

Consistent machine configuration, parametrization, programming and diagnosis are the fundamental

aspects for a machine-oriented application. The implementation of the independent standards such as

Motion Control functionalities in accordance with PLCopen or EtherCAT field bus are used.

Your knowledge is managed in the form of parameters and functions in data-sets and libraries —

over the entire machine life cycle.

Thanks to ProMaster you can concentrate on your core competence — your machine.


b maXX HMI — Machine Operation

The b maXX HMI range covers a series of different graphics-enabled terminals designed

for touch operation. The sleek design and wide range of functionality provide you with

all possible means to structure your machine even more efficiently. Using functions such

as alarms, various different diagrams, recipes and language switching, the equipment

can be combined via IT mechanisms such as a web-service, email via SMTP or FTP.

Incorporation of the visualization in the control system is effected by a PC-based

OPC server or via modbus TPC.

b maXX drivePLC — Drive-Integrated Control System

The b maXX drivePLC makes the drive intelligent. The control system intelligence

direct on the drive offers the facility of gaining very rapid access to the set value

and actual value of the drive regulator. This allows the function of the drive to

be expanded by complex motion control, technological and control functions.

This guarantees rapid and economical applications.

The b maXX drivePLC is fully integrated in the Engineering Framework ProMaster.

Here you have access to all applications for the creation of the machine/plant

topology, the field bus and I/O configurators as well as applications such as the

IEC 61131-3 programming environment PROPROGwt III, the cam disk editor ProCAM

and others. A b maXX local drivePLC is available for applications on the local axis.

b maXX Controller PLC — Modular and Safe

The b maXX Controller PLC consistently implements the concept of scalability and mo-

dularity for flexible individual adapting by the mechanical engineer. Thus the b maXX

PLC02-Safe has extended the standard motion control range by a two-channel safety

control system that fulfils the requirements of IEC61508 to SIL3 and EN 13849 to PL e.

This is the first certificated EtherCAT Motion Control PLC with integrated safety function.

b maXX-PCC — PC based PLC

The calculation performance of an industrial PC in combination with a powerful PLC

supplements the range of control systems with a reliable and innovative platform.

It is equipped with components of the highest level of performance and is based on

open standards in the fields of automation and IT. Multi-core processor architecture

provides decisive advantages for automation solutions: various different functions

can be distributed and the calculation performance can be allocated to the various

tasks. It therefore not only fulfils the high real-time requirements of calculation-

intensive applications in a control system, it also takes on additional tasks such as

visualization or IT linking on a platform. Both box and panel versions are available.

16 16,02 16,04 16,06 16,08 16,10 16,12 16,14 16,16 16,18 16,20 16,22 16,24 16,26 16,28 16,30 16,32 16,34 16,36 16,38 16,40 16,42 16,44 16,46 16,48 16,50 16,52 16,56 16,58 16,60 16,62 16,64 16,66 16,68 16,70 16,72 16,74 16,76 16,78 16,80 16,82 16,84 16,86 16,88 16,90 16,9816,5416,52 16,56 16,58 16,60 16,62 16,64 16,66 16,68 16,70 16,72 16,74 16,76 16,78 16,80 16,82 16,84 16,86 16,88 16,90 16,9816,54

4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

22 33 44 55 66 77 88 99

11

News from the pioneer of direct drive technology: We present to you the new alignable

drive system b maXX 5000 as supplement of our successful b maXX 4000 range. The new

range offers a performance spectrum of 1 kW to 35 kW in a rack system. With power

supplied and regenerative systems, b maXX 5000 can be use worldwide as an energy efficient

drive system. With its Connect Drive System, which enables you to commission our drives

efficiently and economically, it displays the perfect expansion of our existing product range.

b maXX — unachieved dynamics and compactness5000

Baumüller has been setting a new standard with the converters and controllers of the b maXX series. This drive generation was developed to meet current and future worldwide requirements for auto-mation technology. b maXX constitutes the basis for five different product series when it comes to both simple and complex automation solutions.


11 12 13 14 15 16 17 18 19 20 21

b maXX — modular, scalable, open4000

The servo inverter b maXX 3300 is a high-quality servo controller with integrated

position control for power ratings up to 5 kW. b maXX 3300 excels through its

compact, space-saving design. The field-oriented control provides for excellent

performance. Higher-level speed and position control ensure dynamic and exact

positioning. The servo controller is specifically designed for operation with the

DSD 28–100 servomotors and the pancake and linear motor series from Baumüller.

Functional safety relay integrated into the drive available as an option.

b maXX — versatile mini servo controller3300

b maXX 2000 rounds off the converter and controller generation b maXX at the

lower end of the power range. The mini servo controller b maXX 2400 (< 60V)

is specifically designed for operation with the DSD 28–36 servomotors and the

pancake and linear motor series from Baumüller.

b maXX — compact mini servo controller2000

For a vector control of standard electric motors Baumüller added an high-efficient

and easy to operate frequency converter into the program: The b maXX 1000 is

available in three sizes with capacity ranges from 0.2 to 11 kW. An integrated EMV

filter and various protection and overload monitoring functions ensure a troublefree

operation. An extensive control and data management system ensures a continuously

and exact overview of the current drive status.

b maXX — highly efficient frequency converter1000

Baumüller’s approved automation and drive solution b maXX can be adapted to

the corresponding demands with respect to performance and equipment through

its modularity and flexibility. b maXX 4000 offers a power spectrum from 1,1 kW

up to 315 kW with different cooling concepts, such as air and water cooling or

cold plate variants. With the series b maXX 4100 a regenerative system is at your

disposal, which inserts itself smoothly into the automation solution b maXX.

Functional safety relay integrated into the drive available as an option. The peak

load and rated load devices (b maXX 4600, b maXX 4700) supplement the proven

bmaXX series and are available in five frame sizes. Whether you need maximum

output for continuous operation or only for short durations, the b maXX series

offers a customized drive solution for every application.

18 18,02 18,04 18,06 18,08 18,10 18,12 18,14 18,16 18,18 18,20 18,22 18,24 18,26 18,28 18,30 18,32 18,34 18,36 18,38 18,40 18,42 18,44 18,46 18,48 18,50 18,52 18,56 18,58 18,60 18,62 18,64 18,66 18,68 18,70 18,72 18,74 18,76 18,78 18,80 18,82 18,84 18,86 18,88 18,90 18,9818,5418,52 18,56 18,58 18,60 18,62 18,64 18,66 18,68 18,70 18,72 18,74 18,76 18,78 18,80 18,82 18,84 18,86 18,88 18,90 18,9818,54

135 200 260 315 400400

The servo motor for all applications with strict energy efficiency requirements.

Type DS: Sizes 45, 56, 71, 100, 132, 160 and 200,

Power range 0.25 – 290 kW (0.33 – 389 hp), speeds up to 6000 min-1,

unventilated IP54, ventilated IP23/IP54, water-cooled IP54.

Type DA: Sizes 100, 132, 160, 180, 225 and 280,

Power range 3.5 – 400 kW (4.7 – 536 hp), speeds up to 3000 min-1,

ventilated IP23/IP54, water-cooled IP54.

DS/DA — General purpose servo motors

Baumüller offers an extremely wide range of synchronous and asynchronous motors with shaft heights from 28 mm to 400 mm and many different cooling methods.

18,52 18,56 18,58 18,60 18,62 18,64 18,66 18,68 18,70 18,72 18,74 18,76 18,78 18,80 18,82 18,84 18,86 18,88 18,90 18,9818,54 1918,52 18,56 18,58 18,60 18,62 18,64 18,66 18,68 18,70 18,72 18,74 18,76 18,78 18,80 18,82 18,84 18,86 18,88 18,90 18,9818,54 www.baumueller.de18,56 18,60 18,62 18,64 18,66 18,68 18,9818,56 18,9818,56 18,58 18,9818,58 18,60 18,9818,60 18,62 18,9818,62 18,64 18,9818,64 18,66 18,9818,66 18,68 18,9818,68

DSD — Dynamic servo motorsThe servo motors for highly dynamic applications with the

highest requirements of acceleration capacity and the best

start-stop qualities.

Sizes 28, 36, 45, 56, 71 and 100,

Power range 0.28-37 kW (0.38-49.6 hp), speeds up to 6000 min-1,

up to IP65 type of protection.

DSC — Compact servo motorsThe DSC 45-100 is a series of high-torque servo motors that are

up to 30% more compact than conventional servo designs.

Sizes 45, 56, 71 and 100,

Power range 0.5-18 kW (0.67-24,1 hp), speeds up to 4000 min-1,

up to IP65 type of protection.

DST — Powerful high torque motorsThe high-torque motor DST2 for application with maximum torque requirements.

Sizes 135, 200, 260, 315 and 400.

Power range 2.7-320 kW (3.6-429 hp), speeds up to 1500 min-1,

Torque up to 32,900 Nm, IP54 type of protection, water-cooled.

GDM & DSM — Disc motorsBaumüller offers a wide range of disc rotors for use in a large number of different

applications where installation space is at a premium.

GDM DC disc motors:

Power range 16-3000 W (0.02-4 hp)

DSM brushless disc motors:

Power range 180-6300 W (0.24-8.4 hp)

DSA external rotor motorsBaumüller external rotor motors save energy due to their high efficiency rate.

Also available are kit solutions for customer-specific installation.

Stator diameter from 74 to 180 mm

Performance range from 100 to 900 W (0,13-1,21 hp)

Rotor position detection with 3 Hall sensors and other encoder systems

BPx — Baumüller Planetary Gear SeriesThe BPx planetary gear series in combination with our standard DS/DSD/DSC

servo motors are ideally suited for applications with high demands on torque

and dynamic.

Baumüller Linear drivesBaumüller linear motors can achieve maximum thrust forces of up to 14,750 N.

Customized motor concepts can be created using a modular system.

ii ii,02 ii,04 ii,06 ii,08 ii,10 ii,12 ii,14 ii,16 ii,18 ii,20 ii,22 ii,24 ii,26 ii,28 ii,30 ii,32 ii,34 ii,36 ii,38 ii,40 ii,42 ii,44 ii,46 ii,48 ii,50 ii,52 ii,56 ii,58 ii,60 ii,62 ii,64 ii,66 ii,68 ii,70 ii,72 ii,74 ii,76 ii,78 ii,80 ii,82 ii,84 ii,86 ii,88 ii,90 ii,98ii,54ii,52 ii,56 ii,58 ii,60 ii,62 ii,64 ii,66 ii,68 ii,70 ii,72 ii,74 ii,76 ii,78 ii,80 ii,82 ii,84 ii,86 ii,88 ii,90 ii,98ii,54ii,52 ii,56 ii,58 ii,60 ii,62 ii,64 ii,66 ii,68 ii,70 ii,72 ii,74 ii,76 ii,78 ii,80 ii,82 ii,84 ii,86 ii,88 ii,90 ii,98ii,54

30 40 42 54 64 84 115 128 173 192

800 825 850 875 900 925 950 975 1000

be in motion be in motion be in motion be in motion

2.154.en.04/12.10E

04/12

Headquarters Subsidiaries

Baumüller Nürnberg GmbHOstendstraße 80-90, DE-90482 Nürnberg T: +49 (0) 911 5432 - 0, F: +49 (0) 911 5432 - 130www.baumueller.com

Baumüller Anlagen-Systemtechnik GmbH & Co. KGOstendstraße 84, DE-90482 Nürnberg T: +49 (0) 911 54408 - 0, F: +49 (0) 911 54408 - 769www.baumueller.com

Baumüller Reparaturwerk GmbH & Co. KGAndernacher Straße 19, DE-90411 Nürnberg T: +49 (0) 911 9552 - 0, F: +49 (0) 911 9552 - 999www.baumueller-services.com

Baumüller DirectMotion GmbHOstendstraße 80, DE-90482 Nürnberg Standort Bad Gandersheim: Flugplatzweg 2, DE-37581 Bad Gandersheim T: +49 (0) 5382 9805 - 0, F: +49 (0) 5382 9805 - 55 www.baumueller.com Nürmont Installations GmbH & Co. KG Am Keuper 14, DE-90475 Nürnberg T: +49 (0) 9128 9255 - 0, F: +49 (0) 9128 9255 - 333 www.nuermont.com

Africa, South Motion Tronic cc Unit 18 Wareing Park, ZA-3610 Pinetown T: +27 31 7011620, F: +27 86 6150597

ArgentinaMektron Ingenieria y desarrollo, Maza 1452 C.A.B.A., Buenos Aires, ARG T: +54 11 4931 8721, F: +54 11 4931 8721

AustraliaBaumüller Australia Pty. Ltd. 19 Baker Street, Botany NSW 2019, Sydney, AU T: +61 2 83350 - 100, F: +61 2 83350 - 169

AustriaBaumüller Austria GmbH Im Bäckerfeld 17, AT-4060 Leonding T: +43 (0) 732 674414 - 0, F: +43 (0) 732 674414 - 32

BrazilNC Service Indústria e Comércio Ltda. Av. Tamboré, 1217 Baruerí-SP, BR-06460-000 T: +55 (0) 11 4134 - 0502, F: +55 (0) 11 4195 - 2479

ChinaBaumueller Automation Equipment Trading (Shanghai) Co., Ltd. T20-3, No. 258 Jinzang Road Jinqiao Export Processing Zone, Pudong, 201206 Shanghai, CN T: +86 (0) 21 5031 0336, F: +86 (0) 21 5031 6106

ChinaBeijing Yanghai Automation Technology Co., Ltd. Room 1008, No.7, Huaqing Business Building, Huaqing Garden, Wudaokou, Haidian District, 100083 Beijing, CN T: +86 (0) 10 8286 7980, F: +86 (0) 10 8286 7987

France Baumüller France S.à.r.l. Parc Saint Exupéry 6 bis, rue Maryse Bastié, FR-69500 Bron T: +33 (0) 4 3724 0900, F: +33 (0) 4 7826 3420

FranceBaumüller France S.à.r.l. 9 rue de la Durance, FR-67100 Strasbourg T: +33 (0) 3 8840 1251, F: +33 (0) 3 8840 0724

Germany - DarmstadtBaumüller Nürnberg GmbH Waldstraße 1, DE-64347 Griesheim T: +49 (0) 6155 8430 - 0, F: +49 (0) 6155 8430 - 20

Deutschland - DresdenBaumüller Nürnberg GmbH Fritz-Reuter-Str.34a, DE-01097 Dresden T: +49 (0) 911 5432-515, F: +49 (0) 911 5432-99518

Germany - FreibergNürmont Installations GmbH & Co. KG Am Junger Löwe Schacht 11, DE-09599 Freiberg T: +49 (0) 3731 3084 - 0, F: +49 (0) 3731 3084 - 33

Germany - HannoverBaumüller Nürnberg GmbH Bohlenweg 10, DE-30853 Langenhagen T: +49 (0) 511 771 968 - 0, F: +49 (0) 511 771 968 - 77

Germany - MünchenBaumüller Reparaturwerk GmbH & Co. KG Meglingerstraße 58, DE-81477 München T: +49 (0) 89 748 898 - 0, F: +49 (0) 89 748 898 - 55

Germany - NeuruppinNürmont Installations GmbH & Co. KG Alfred-Wegener-Straße 15, DE-16816 Neuruppin T: +49 (0) 3391 40597 - 0, F: +49 (0) 3391 40597 - 19

Germany - RossauBaumüller Anlagen-Systemtechnik GmbH & Co. KG Am Rossauer Wald 7, DE-09661 Rossau T: +49 (0) 37207 6508 - 10, F: +49 (0) 37207 6508 - 61

Germany - Velbert Baumüller Nürnberg GmbH Sontumer Str. 18, DE-42551 Velbert T: +49 (0) 2051 80858 - 0 F: +49(0)2051 80858 - 15

Great BritainBaumüller UK (South) Ltd. 14 Redlands Centre, GB-Coulsdon, Surrey CR5 2HT T: +44 (0) 208 - 763 2990, F: +44 (0) 208 - 763 2959

Great Britain Baumüller UK (North) Ltd. Cyprus Building, Mossley, GB-Lancashire, OL5 9BL T: +44 (0) 1457 8374 - 95, F: +44 (0) 1457 8374 - 90

IndiaBaumüller India Pvt. Ltd. „Kavi“ - Survey- 94/ 7, Plot- 38, Paud Road, Bhusari Colony, Kothrud, IN-411038 Pune T: +91 20 401603 33, F: +91 20 254241 79

Israel SERVI-TECH LTD. 48d HaHaroshet St. Building 34/10 P.O.B 6371, Ind. Zone Carmiel 20651 T: +972-4-9589550, F: +972-4-9589551

ItalyBaumüller Italia S.r.l. Viale Italia 12, IT-20094 Corsico (Mi) T: +39 02 45100 - 181, F: +39 02 45100 - 426

Korea, South Bomac Systems 417 Yucheon Factophia, 196 Anyang-7 dong, Mananku, Anyangsi, Kyungkido 430-017, KR T: +82 31 467 - 2030, F: +82 31 467 - 2033

Korea, South Any Engineering Co. 25-213, Sihung-dong., Geumcheon-gu, Seoul 153-030 Korea T: +82 10 3713 8705, T: +82 10 3302 0034

NetherlandsBaumüller Benelux B.V. Regenbeemd 6, NL-4825 AT Breda T: +31 (0) 76 5717111, F: +31 (0) 76 5871211

PolandMekelburger Polska Ul. Kóscielna 39 F/3, PL-60537 Poznán T: +48 601 87 87 03, F: +48 (0) 61 8481 520

RussiaProSensor Zavodskaya Street 1B building 2 RU-124365 Moscow, Zelenograd, T: +7 495 6428 476, F: +7 495 6428 477

Slovenia, CroatiaBaumüller Dravinja d.o.o. Delavska cesta 10, SI-3210 Slovenske-Konjice T: +386 3 75723 - 00, F: +386 3 75723 - 32 / 33

SpainBaumüller Ibérica S.A. C/ Crom, 35-37, 2º2ª, ES-08907 Hospitalet de Llobregat, T: +34 93 263 0985, F: +34 93 263 2059

SwitzerlandBaumüller Swiss AG Oberwiesenstrasse 75, CH-8500 Frauenfeld T: +41 (0) 52 723 28 - 00, F: +41 (0) 52 723 28 - 01

ThailandMr. Tom Sale and Service Co., Ltd. 39/9 Moo 1, Tepkanjana Rd., Tambol Nadee Amphur Muang, TH-74000 Samutsakorn T: +66 34 854932-4, F: +66 34 854935

TurkeyBaumüller Motor Kontrol Sistem San. ve Tic. Ltd. Sti. Girne Mah., Kücükyali Is Merkezi, B Blok No. 12 Maltepe, TR-34852 Maltepe - Istanbul T: +90 216 519 – 9071, F: +90 216 519 – 9072

USABaumueller-Nuermont Corp. 1858 S. Elmhurst Road, US-Mount Prospect, IL 60056, T: +1 847 956-7392, F: +1 847 956-7925

USABaumueller-Nuermont Corp. 1555 Oakbrook Drive Suite 120, US-Norcross, GA 30093 , T: +1 678 291-0535, F: +1 678 291-0537

USABaumueller-Nuermont Corp. 429 B Hayden Station Road, US-Windsor, CT 06095, T: +1 860 243-0232, F: +1 860 286-3080

Venezuela, Colombia, EcuadorNimbus International 6861 SW 196th Ave, Ste. 304, US-Pembroke Pines, FL 33332, T: +1 954 252-9242, F: +1 954 252-5372

All data/information and particulars given in this brochure is non-binding customer information, subject to constant further development and continuously updated by our permanent alteration service. Please note that all particulars/figures/information is current data at the date of printing. These particulars are not legally binding for the purpose of measurement, calculation or cost accounting. Prior to using any of the information contained in this brochure as a basis for your own calculations and/or applications, please inform yourself about whether the information you have at your disposal is up to date. Therefore, no liability is assumed for the correctness of the information.

Responsible for content: Baumüller Nürnberg GmbH Ostendstraße 80–90 90482 Nürnberg T: +49 (0) 911 5432 - 0 F: +49 (0) 911 5432 - 130 www.baumueller.com Baumüller Anlagen-Systemtechnik GmbH & Co. KG Ostendstraße 84 90482 Nürnberg T: +49 (0) 911 54408 - 0 F: +49 (0) 911 54408 - 769 Baumüller Reparaturwerk GmbH & Co. KG Andernacher Straße 19 90411 Nürnberg T: +49 (0) 911 9552 - 0 F: +49 (0) 911 9552 - 999 Baumüller DirectMotion GmbH Ostendstraße 80 90482 Nürnberg Location Bad Gandersheim: Flugplatzweg 2 37581 Bad Gandersheim T: +49 (0) 5382 9805- 0 F: +49 (0) 5382 9805 - 55

Printing - Safeconsafecon.co.in/.../BAMULLER/Druckprospekt_EN_Web.pdf · 2013-10-08 ·...

Documents

Transcript of Printing - Safeconsafecon.co.in/.../BAMULLER/Druckprospekt_EN_Web.pdf · 2013-10-08 ·...