Prescient II Extinguishing Control Panels Comprehensive facilities for gaseous extinguishing systems...
-
Upload
dominic-owen -
Category
Documents
-
view
220 -
download
6
Transcript of Prescient II Extinguishing Control Panels Comprehensive facilities for gaseous extinguishing systems...
![Page 1: Prescient II Extinguishing Control Panels Comprehensive facilities for gaseous extinguishing systems Designed to BS 7273 Part 1 Complies with EMC and LVD.](https://reader036.fdocuments.in/reader036/viewer/2022082805/55142222550346d8488b5883/html5/thumbnails/1.jpg)
Prescient Prescient II II Extinguishing Extinguishing Control PanelsControl Panels
• Comprehensive facilities for gaseous
extinguishing systems
• Designed to BS 7273 Part 1
• Complies with EMC and LVD directives
• 1 minute actuator cut off operation
• Monitored actuator / solenoid release
• Zone isolate feature
• Common fire, fault relay facilities
• 1st & 2nd stage relay facilities
• Gas discharged and reset relay facilities
• Intrinsically safe barrier settings
![Page 2: Prescient II Extinguishing Control Panels Comprehensive facilities for gaseous extinguishing systems Designed to BS 7273 Part 1 Complies with EMC and LVD.](https://reader036.fdocuments.in/reader036/viewer/2022082805/55142222550346d8488b5883/html5/thumbnails/2.jpg)
Prescient Prescient II II Extinguishing Extinguishing Control PanelsControl Panels
• Metron or solenoid compatible
• Single or double knock operation
• Pre-discharge delay adjustable from 0 to 8.5
minutes
• Discharge indication with or without pressure
switch
• Option for inhibit silence alarms when gas
imminent
• Option for rapid buzzer pulse when gas
imminent
• Semi-flush bezel and fully-flush cabinet options
• Membrane fascia with tactile switches
• Easily removable chassis
![Page 3: Prescient II Extinguishing Control Panels Comprehensive facilities for gaseous extinguishing systems Designed to BS 7273 Part 1 Complies with EMC and LVD.](https://reader036.fdocuments.in/reader036/viewer/2022082805/55142222550346d8488b5883/html5/thumbnails/3.jpg)
Mechanical AssemblyMechanical Assembly
24V battery set.24V battery set.
Display and motherboard chassis are removable for
ease of wall mounting.
Display and motherboard chassis are removable for
ease of wall mounting.
Multiple earth termination points located adjacent to
cable entries.
Multiple earth termination points located adjacent to
cable entries.
Mounting points for the Prescient motherboard
chassis.
Mounting points for the Prescient motherboard
chassis.
![Page 4: Prescient II Extinguishing Control Panels Comprehensive facilities for gaseous extinguishing systems Designed to BS 7273 Part 1 Complies with EMC and LVD.](https://reader036.fdocuments.in/reader036/viewer/2022082805/55142222550346d8488b5883/html5/thumbnails/4.jpg)
Detection inputs and Alarm / Detection inputs and Alarm / Actuator outputsActuator outputs
![Page 5: Prescient II Extinguishing Control Panels Comprehensive facilities for gaseous extinguishing systems Designed to BS 7273 Part 1 Complies with EMC and LVD.](https://reader036.fdocuments.in/reader036/viewer/2022082805/55142222550346d8488b5883/html5/thumbnails/5.jpg)
Remote ConnectionsRemote Connections
![Page 6: Prescient II Extinguishing Control Panels Comprehensive facilities for gaseous extinguishing systems Designed to BS 7273 Part 1 Complies with EMC and LVD.](https://reader036.fdocuments.in/reader036/viewer/2022082805/55142222550346d8488b5883/html5/thumbnails/6.jpg)
Relay ContactsRelay Contacts
![Page 7: Prescient II Extinguishing Control Panels Comprehensive facilities for gaseous extinguishing systems Designed to BS 7273 Part 1 Complies with EMC and LVD.](https://reader036.fdocuments.in/reader036/viewer/2022082805/55142222550346d8488b5883/html5/thumbnails/7.jpg)
Panel Configuration OptionsPanel Configuration Options
• One-Man Test
• Earth Fault Monitoring Enable/Disable
• Zone 1 Double Knock
• Zone 2 Double Knock
• Zener Barrier Thresholds
• Pressure Switch Used/Not Used Option
• Actuator Short Circuit Enable/Disable
• 0 to 8 minutes 30 seconds Timer Delay
• Manual Release Gives Instant Discharge
• Inhibit Silence Alarms During Gas Imminent
• Buzzer Rapid Pulse 15 Seconds Before Discharge
• Evacuate Operates Aux. Fire Relay
• Latching Fault Indications
• Motherboard link to switch off actuator output after 1 minute operation
![Page 8: Prescient II Extinguishing Control Panels Comprehensive facilities for gaseous extinguishing systems Designed to BS 7273 Part 1 Complies with EMC and LVD.](https://reader036.fdocuments.in/reader036/viewer/2022082805/55142222550346d8488b5883/html5/thumbnails/8.jpg)
Alarm Circuit OptionsAlarm Circuit Options
•Alarm1 First Stage, Alarm2 Second Stage•Either - Alarm Circuit 1 operates for a first stage alarm condition and a second stage alarm condition.•Or - Alarm Circuit 2 operates only for a second stage alarm condition.
•Alarms Continuous in First Stage•Either - Alarm Circuits 1 and 2 pulse for a first stage alarm condition•Or - Alarm Circuits 1 and 2 are continuous for a first stage alarm condition
•Alarms Continuous in Second Stage•Either - Alarm Circuits 1 and 2 pulse for a second stage alarm condition. •Or - Alarm Circuits 1 and 2 are continuous for a second stage alarm condition
![Page 9: Prescient II Extinguishing Control Panels Comprehensive facilities for gaseous extinguishing systems Designed to BS 7273 Part 1 Complies with EMC and LVD.](https://reader036.fdocuments.in/reader036/viewer/2022082805/55142222550346d8488b5883/html5/thumbnails/9.jpg)
User ControlsUser Controls
Keyswitch to enable user
controls
Keyswitch to enable user
controls
These single-function user controls are easy
to operate.
These single-function user controls are easy
to operate.Fire status LED
indications.
Fire status LED indications.
Extinguishing system LED indications.
Extinguishing system LED indications.
The Prescient panel has clear, unambiguous fire and extinguishing system status LED
indications.
The Prescient panel has clear, unambiguous fire and extinguishing system status LED
indications.
![Page 10: Prescient II Extinguishing Control Panels Comprehensive facilities for gaseous extinguishing systems Designed to BS 7273 Part 1 Complies with EMC and LVD.](https://reader036.fdocuments.in/reader036/viewer/2022082805/55142222550346d8488b5883/html5/thumbnails/10.jpg)
Status IndicatorsStatus Indicators
Two types of status indicators are available in small, matching enclosures.
status indicator with auto/manual keyswitch
status indicators with manual release and auto/manual keyswitch, abort and timer hold
Two types of status indicators are available in small, matching enclosures.
status indicator with auto/manual keyswitch
status indicators with manual release and auto/manual keyswitch, abort and timer hold
Weatherproof status indicators are also available
(not illustrated).
Weatherproof status indicators are also available
(not illustrated).
![Page 11: Prescient II Extinguishing Control Panels Comprehensive facilities for gaseous extinguishing systems Designed to BS 7273 Part 1 Complies with EMC and LVD.](https://reader036.fdocuments.in/reader036/viewer/2022082805/55142222550346d8488b5883/html5/thumbnails/11.jpg)
LC250 Weight MonitorLC250 Weight Monitor
The LC250 Weight Monitor is designed to detect and indicate leakage from
extinguishant cylinders.
The LC250 Weight Monitor is designed to detect and indicate leakage from
extinguishant cylinders.
No need for mechanical assemblies which take up
space.
No need for mechanical assemblies which take up
space.
Easy to configure controller links up to 4 weigh monitors
and may be linked to extinguishant control panel to provide fault indication in the event of extinguishant
leakage.
Easy to configure controller links up to 4 weigh monitors
and may be linked to extinguishant control panel to provide fault indication in the event of extinguishant
leakage.
Solid state electronic weight monitors with no moving
parts ensure simple installation with reliable
performance.
Solid state electronic weight monitors with no moving
parts ensure simple installation with reliable
performance.