PREPCOATS & ENAMELS - Wattyl ID Advanced... · wearing enamel paints with advanced washability,...
Transcript of PREPCOATS & ENAMELS - Wattyl ID Advanced... · wearing enamel paints with advanced washability,...
PREPCOATS& ENAMELS
Product Guide
Wattyl has a proud heritage of manufacturing quality, high performance
paints and coatings.
PREPCOATS:Preparatory products for use on a range of substrates and specific applications which includes a specialist range of water-based and oil-based prepcoats with excellent coverage and adhesion.
WATER-BASED- Ultra Premium quality- Easy to use and easy water clean up - Can be used with water-based or oil-based finish coats- Versatile - for use in interior and exterior applications
OIL-BASED - Ultra Premium quality- Easy to use- Versatile – interior and exterior
application
ENAMELS:A superior range of water-based and oil-based hard wearing enamel paints with advanced washability, scuff and stain resistance. Ideal for all bathroom, hallway and kitchen projects.
WATER-BASED- Tough and hard wearing- Superior finish and appearance- Low odour, low VOC and low environmental impact- Faster drying for easy recoat and ease of use
OIL-BASED- Ultra tough, durable enamel- Good flow and levelling for a smooth, even finish- Excellent washability and stain resistance- Scuff and burnish resistance
Wattyl has developed an extensive range of superior oil-based and water-based prepcoats and enamels. Together with the Wattyl I.D Advanced finishing coats, this range will deliver optimum protection and enhance any project.
INTERIORBASES: WHITE
SIZES: 1L, 4L, 10L
WATER-BASED
INTERIOR / EXTERIORBASES: WHITE
SIZES: 1L, 4L, 10L
WATER-BASED
l VOC Level <40g/Ll Fast drying, sands easilyl Sound base for finish coatsl Use with water-based and
oil-based finish coats
l VOC Level <1g/Ll Excellent coveragel Quick drying, superior sandingl Lower environmental impact
with virtually no odour
01720172 0215/6
Tintable Coverage
Up to 14m2
per litre
Recoat
2 HOURS
Touch Dry
30 MINS
Tintable Coverage
Up to 14m2
per litre
Recoat
2 HOURS
Touch Dry
30 MINS
^ Do not tint where adhesion is the prime requirement
INTERIOR / EXTERIORBASES: WHITE
SIZES: 500mL, 1L, 4L, 10L, 15L
WATER-BASED
l VOC Level <20g/Ll Easy application and quick
dryingl Excellent sandability, ultimate
smooth finish l Use with water-based and
oil-based finish coats
INTERIOR / EXTERIORBASES: LIGHT GREY
SIZES: 1L, 4L
WATER-BASED
l VOC Level <10g/Ll Resists white rust formationl Quick dryingl Primes most non-ferrous metals l Use with water-based and
oil-based finish coats
01720134
AQUA PREP
Tintable^ Coverage
Up to 14m2
per litre
Recoat
2 HOURS
Touch Dry
30 MINS
WATER-BASED PREPCOATS
Coverage
Up to 14m2
per litre
Recoat
2 HOURS
Touch Dry
30 MINS
Do Not Tint
INTERIORBASES: TRANSLUCENT OFF WHITE
SIZES: 10L ONLY
WATER-BASED
INTERIOR / EXTERIORBASES: OFF WHITE
SIZES: 1L, 4L, 10L
WATER-BASED
l VOC Level <30g/Ll Resists topcoat cracking and
peelingl Locks in tannin, stops bleeding
through finish coatsl Use with water-based or
oil-based finish coats
l VOC Level <5g/Ll Protects paint from alkali attack
on set plasterl Promotes adhesion on set
plaster substratesl Water clean up
0183 0216
AQUA PREPWATER-BASED PREPCOATS
Coverage
Up to 14m2
per litre
Recoat
2 HOURS
Touch Dry
30 MINS
Do Not Tint Coverage
Up to 12m2
per litre
Recoat
4 HOURS
Touch Dry
2 HOURS
Do Not Tint
INTERIOR / EXTERIORBASES: WHITE, LIGHT, MID, STRONG
SIZES: 1L, 2L, 4L, 10LRefer to the range chart for available sizes for each base.
WATER-BASED
INTERIOR / EXTERIORBASES: WHITE, LIGHT, MID, STRONG
SIZES: 1L, 2L, 4L, 10LRefer to the range chart for available sizes for each base.
WATER-BASED
• VOC Level <45g/L• Fast drying, superior speed and
ease of use• Non-yellowing for cleaner
colours• Low odour and environmental
impact
• VOC Level <45g/L• Fast drying, superior speed and
ease of use• Non-yellowing for cleaner
colours• Low odour and environmental
impact
Gloss
GLOSS LEVEL INDICATOR
Flat20 5 30 50 80 90 10010
Satin High Gloss20 70
Satin
GLOSS LEVEL INDICATOR
Flat20 5 30 50 80 90 10010
Satin High Gloss20 70
0260/2 0260/1
AQUA TRIMWATER-BASED ENAMELS
Tintable Coverage
Up to 16m2
per litre
Recoat
2 HOURS
Touch Dry
30 MINS
Tintable Coverage
Up to 16m2
per litre
Recoat
2 HOURS
Touch Dry
30 MINS
INTERIOR / EXTERIORBASES: WHITE
SIZES: 500mL, 1L, 4L, 10L
OIL-BASED
INTERIOR / EXTERIORBASES: WHITE, PINK
SIZES: 1L, 4L, 10LRefer to the Wattyl range chart for available sizes for each base.
OIL-BASED
l VOC Level <360g/Ll Excellent stain blocking on
tannin rich timberl Minimises topcoat cracking and
peelingl Excellent adhesion for enamel
finish coats
l VOC Level <390g/Ll Fills minor imperfections,
excellent hiding l Excellent sanding for smooth,
even finish l Superior gloss holdout of
enamel finish coats
01810016/1
Tintable Coverage
Up to 14m2
per litre
Recoat
24 HOURS
Touch Dry
4 HOURS
Coverage
Up to 14m2
per litre
Recoat
24 HOURS
Touch Dry
4 HOURS
Do Not Tint
INTERIOR / EXTERIORBASES: WHITE, RED OXIDE
SIZES: 1L, 4L
OIL-BASED
* For water-based topcoats two coats of metal primer is required
l VOC Level <460g/Ll Use with water-based* and
oil-based finish coatsl Superior adhesion for priming
ferrous metal surfacesl Anti-corrosive pigments for
improved metal protection
INTERIORBASES: WHITE
SIZES: 1L, 4L
SPIRIT-BASED
l VOC Level <510g/Ll Blocks stain transfer to finish
coatl Binds back smoke, water,
cooking and oil stainsl Use with water-based and
oil-based finish coats
MASTER PREPOIL-BASED PREPCOATS
Coverage
Up to 14m2
per litre
Recoat
24 HOURS
Touch Dry
4 HOURS
Do Not Tint Coverage
Up to 14m2
per litre
Recoat
2 HOURS
Touch Dry
10 MINS
Do Not Tint
INTERIOR / EXTERIORBASES: OFF WHITE
SIZES: 4L, 10L
OIL-BASED
INTERIOR / EXTERIORBASES: CLEAR
SIZES: 4L ONLY
OIL-BASED
l VOC Level <580g/Ll Promotes adhesion on powdery
kalsomine surfacesl Promotes adhesion on chalky
weathered paintsl Use with water-based and
oil-based finish coats
l VOC Level <420g/Ll Promotes adhesion on
absorbent surfaces l Protects paint from alkali attack
on set plasterl Use with water-based and
oil-based finish coats
0171
MASTER PREPOIL-BASED PREPCOATS
Coverage
Up to 10m2
per litre
Recoat
48 HOURS
Touch Dry
6-8 HOURS
Do Not TintCoverage
Up to 16m2
per litre
Recoat
24 HOURS
Touch Dry
4 HOURS
Do Not Tint
INTERIOR / EXTERIORBASES: WHITE, LIGHT, MID, STRONG
SIZES: 1L, 2L, 4L, 10LRefer to the range chart for available sizes for each base.
OIL-BASED
INTERIORBASES: WHITE, LIGHT, MID, STRONG
SIZES: 1L, 2L, 4L, 10LRefer to the range chart for available sizes for each base.
OIL-BASED
• VOC Level <430g/L• Superior feel and appearance• Excellent covering power• Excellent washability• Smooth durable finish• Scuff resistant
• VOC Level <450g/L• Superior feel and appearance• Excellent covering power• Smooth durable finish• Excellent washability• Scuff resistant
Gloss
GLOSS LEVEL INDICATOR
Flat20 5 30 50 80 90 10010
Satin High Gloss20 70
Satin
GLOSS LEVEL INDICATOR
Flat20 5 30 50 80 90 10010
Satin High Gloss20 70
0015/10015/3
MASTER ENAMELOIL-BASED ENAMELS
Tintable Coverage
Up to 16m2
per litre
Recoat
24 HOURS
Touch Dry
4 HOURS
Tintable Coverage
Up to 16m2
per litre
Recoat
24 HOURS
Touch Dry
4 HOURS
A NEW LEVEL OF
PROTECTION
TOTALPROTECTIONTECHNOLOGY
With Total Protection Technology delivering new levels of protection and durability.
A NEW LEVEL OF
PROTECTION
ANTI-MOULD AND MILDEW
RESISTS BACTERIA
LOW VOC LOW ODOUR
EASY CLEAN STAIN RESISTANT
GECA AND APAS ACCREDITATION Wattyl is committed to global best practice, environmental performance and safe manufacturing.
GECA - Good Environmental Choice Australia is an internationally recognised sustainability rating system helping to improve environmental efficiencies in buildings and improving the health and well-being of our communities.
GECA certification standards are developed following ISO 14024 principles for global best practice in eco-labelling.
After a comprehensive assessment, a number of Wattyl paint products have been awarded an Australia Good Environmental Choice Licence.
APAS - Australian Paint Approval Scheme is the largest listing and accreditation scheme for the coatings industry.APAS tests and certifies paints and coatings to ensure they meet stringent performance specifications.
WATTYL PREPCOATS AND ENAMELS | RANGE CHART
Tests and certifies paints and coatings to ensure they meet stringent performance specifications.
GECA ecolabel is an independent sustainability and environmental certification program. GECA certified products are better for the environment and have a reduced impact on human health. Green Building Council recognises GECA certified products.
Product Base 500mL 1L 2L 4L 10L 15L
MASTER PREP
Multi-Purpose Undercoat White ✔ ✔ ✔ ✔
Timber Primer White ✔ ✔ ✔
Timber Primer Pink ✔ ✔
Metal Primer White ✔ ✔
Metal Primer Red Oxide ✔ ✔
Spirit-Based Stain Blocker White ✔ ✔
Pigmented Sealer Off White ✔ ✔
Surface Binder Clear ✔
MASTER ENAMEL
White ✔ ✔ ✔ ✔
Light ✔ ✔
Mid ✔ ✔
Strong ✔ ✔
Gloss White ✔ ✔ ✔ ✔
Light ✔ ✔
Mid ✔ ✔
Strong ✔ ✔
Satin
White ✔ ✔ ✔
White ✔ ✔ ✔
White ✔ ✔ ✔ ✔ ✔
Light Grey ✔ ✔
Off White ✔ ✔ ✔
Translucent Off White ✔
Acrylic Sealer Undercoat LOW VOC
Acrylic Sealer Undercoat (ASU)
Primer Sealer Undercoat
Galvanised Iron Primer
Acrylic Timber Primer
Acrylic Plaster Sealer
AQUA PREP
White ✔ ✔ ✔ ✔
Light ✔ ✔
Mid ✔ ✔
Strong ✔ ✔
Gloss White ✔ ✔ ✔ ✔
Light ✔ ✔
Mid ✔ ✔
Strong ✔ ✔
AQUA TRIM
Satin
For further information refer to the Technical Data Sheets available on our website.
Sherwin-Williams Australia. Level 4, 2 Burbank Place, Baulkham Hills NSW 2153. Sherwin-Williams New Zealand. 4-14 Patiki Road, Avondale.
11/18 WAT18030
AUS 132 101wattyl.com.au NZ 0800 825 7727wattyl.co.nz
WATTYL ASSIST
Don’t worry, whatever you need,
we can help.