TOTAL RANGE GUIDE

Professional Paint Solutions

With a proud heritage of innovation, Wattyl continues to deliver high performance coatings to protect and enhance every type of project.

Specifically designed for the trade, Wattyl’s professional paint solutions deliver superior application, finish and value for money.

Our new Wattyl I.D Advanced range, with Total Protection Technology™, delivers a new level of protection. This interior paint resists the growth of mould and fungus and offers advanced cleanability, washability and stain resistance. With an ultra-low VOC formula at less than 1g/L, Wattyl I.D Advanced far exceeds green-building requirements.

PROFESSIONAL PAINT SOLUTIONS

Introducing Wattyl I.D Advanced Range

Over 100 years of protection

NOW AVAILABLE, INSIDE AND OUT

InteriorExteriorEst. 2018Est. 1979

ANTI-MOULDRESISTS BACTERIAEASY CLEANSTAIN RESISTANTLOW VOC

UV BLOCKOUTFLEXIBLESTAY CLEANBREATHABLESELF PRIMING

TOTALPROTECTIONTECHNOLOGY

The advanced formula offers exceptional covering power and a smooth flat finish, with low VOC, beneficial for indoor air quality.

NEW ADVANCED FORMULATION

WATTYL I.D ADVANCED

CEILING – FLAT

ANTI-MOULD AND MILDEWContains powerful anti-mould ingredients to resist the growth of mould and fungus and protect the surface.

RESISTS BACTERIAHighly durable, bacteria resistant interior wall finish for areas which are the most demanding.

LOW VOC LOW ODOURA low VOC formulation isbeneficial for indoor air quality.

EASY CLEAN STAIN RESISTANTAdvanced cleanability and superior washability to leave walls looking clean and like new for longer.

NEWPRODUCT

*When applied at nominated spreading rate with correct application technique

Wattyl I.D Advanced is a high performance, ultra-premium paint, delivering new levels of protection and durability. Its Total Cover technology offers exceptional covering power, advanced washability and stain resistance, with a low VOC formula beneficial for indoor air quality.

A NEW LEVEL OF PROTECTION

Interiors Wet Areas Ceiling Preps + Ceiling

Water-Based Preps

Oil-Based Preps Doors/Trims Exteriors Textures

Wattyl I.D Advanced ● ● ●

Use with Wattyl

Prepcoats

Use with Wattyl

Prepcoats

SMOOTH AND UNIFORM FINISHSmooth application and excellent flow and levelling for a uniform finish.

2 COAT COVERAGE*

Uniquely formulated to achieve complete coverage in fewer coats.

EASY CLEAN STAIN RESISTANTAdvanced cleanability and washability to leave walls looking clean and like new for longer.

LOW VOC LOW ODOURA low VOC formulation is beneficial for indoor air quality.

PREPCOATS:Preparatory products for use on a range of substrates and specific applications which includes a specialist range of water-based and oil-based prepcoats with excellent coverage and adhesion.

WATER-BASED- Ultra Premium quality- Easy to use and easy water clean up - Can be used with water-based or oil-based

finish coats- Versatile - for use in interior and exterior

applications

OIL-BASED - Ultra Premium quality- Easy to use- Versatile – interior and exterior

application

Interiors Wet Areas Ceiling Preps + Ceiling

Water-Based Preps

Oil-Based Preps Doors/Trims Exteriors Textures

Wattyl Prepcoats and Enamels ● ● ● ● ● ●

WATTYL PREPCOATS AND ENAMELS

ENAMELS:A superior range of water-based and oil-based hard wearing enamel paints with advanced washability, scuff and stain resistance. Ideal for all bathroom, hallway and kitchen projects.

WATER-BASED- Tough and hard wearing- Superior finish and appearance- Low odour, low VOC and low

environmental impact- Faster drying for easy recoat and ease

of use

OIL-BASED- Ultra tough, durable enamel- Good flow and levelling for a smooth,

even finish- Excellent washability and stain resistance- Scuff and burnish resistance

Wattyl has developed an extensive range of superior oil-based and water-based prepcoats and enamels.

Together with the Wattyl I.D Advanced finishing coats, this range will deliver optimum protection and enhance any project.

Together with the Wattyl I.D Advanced & Wattyl Solagard finishing coats this range will deliver optimum protection and enhance any project.

WATTYL SOLAGARD®

No.1 Under the Australian Sun®

Interiors Wet Areas Ceiling Preps + Ceiling

Water-Based Preps

Oil-Based Preps Doors/Trims Exteriors Textures

Wattyl Solagard®Use with

Wattyl Prepcoats

Use with Wattyl

Prepcoats

Use with Wattyl

Prepcoats & Enamels

● ●

Wattyl Solagard®

Includes Total Protection TechnologyWattyl Solagard® is a tough and durable exterior paint which offers protection for your home in any weather or climate. Solagard’s Total Protection Technology is designed to keep your home looking better for longer, so you’re the talk of the street.

UV BLOCK OUT Blocks out harmful UV rays preventing them from penetrating and damaging the surface.

FLEXIBLE - RESISTS CRACKING & PEELINGLong term �exibility ensures the paint stretches and �exes with the extremes of climate to provide lasting protection against cracking and peeling.

STAY CLEAN - UV CROSS LINK Uses the power of the sun to form a protective layer making the paint surface tougher, reducing dirt adhesion, and keeping the surface cleaner for longer.

BREATHABLE - RESISTS BLISTERINGSolagard resists blistering and surface damage by restricting penetration of water into the surface whilst allowing water vapour to pass through from the building material into the air.

SELF PRIMINGNo primer needed on timber, cement render, brick, �bre cement, masonry, Zincalume® and galvanised iron sheet for faster and simpler painting.

100% ACRYLIC - RESISTS CHALKING & FADING High performance polymers and durable pigments provide resistance against chalking and colour fading in the extremes of sun and weather.

INHIBITS MOULD AND MILDEWContains powerful anti-mould ingredients to resist the growth of mould and fungus and protect the surface.

MADE IN AUSTRALIA FOR AUSTRALIAN CONDITIONSDeveloped in Australia, Solagard is engineered for easy application and lasting protection in all Australian climates!

TotalProtectionTechnology™

UV BLOCKOUT

FLEXIBLE

STAY CLEAN

BREATHABLE

SELF PRIMING

TotalProtectionTechnology™

UV BLOCK OUT Blocks out harmful UV rays preventing them from penetrating and damaging the surface.

FLEXIBLE - RESISTS CRACKING & PEELINGLong term �exibility ensures the paint stretches and �exes with the extremes of climate to provide lasting protection against cracking and peeling.

STAY CLEAN - UV CROSS LINK Uses the power of the sun to form a protective layer making the paint surface tougher, reducing dirt adhesion, and keeping the surface cleaner for longer.

BREATHABLE - RESISTS BLISTERINGSolagard resists blistering and surface damage by restricting penetration of water into the surface whilst allowing water vapour to pass through from the building material into the air.

SELF PRIMINGNo primer needed on timber, cement render, brick, �bre cement, masonry, Zincalume® and galvanised iron sheet for faster and simpler painting.

100% ACRYLIC - RESISTS CHALKING & FADING High performance polymers and durable pigments provide resistance against chalking and colour fading in the extremes of sun and weather.

INHIBITS MOULD AND MILDEWContains powerful anti-mould ingredients to resist the growth of mould and fungus and protect the surface.

MADE IN AUSTRALIA FOR AUSTRALIAN CONDITIONSDeveloped in Australia, Solagard is engineered for easy application and lasting protection in all Australian climates!

TotalProtectionTechnology™

UV BLOCK OUT

FLEXIBLE - RESISTS CRACKING & PEELING

STAY CLEAN - UV CROSS LINK

BREATHABLE - RESISTS BLISTERING

SELF PRIMING

100% ACRYLIC - RESISTS CHALKING & FADING

INHIBITS MOULD AND MILDEW

MADE IN AUSTRALIA FOR AUSTRALIAN CONDITIONS

TotalProtectionTechnology™

WATTYL GRANOSITE®WATTYL SOLAGARD®

Specialist texture coatingsNo.1 Under the Australian Sun®

Interiors Wet Areas Ceiling Preps + Ceiling

Water-Based Preps

Solvent-Based Preps Doors/Trims Exteriors Textures

Wattyl Granosite® ● ● ● ● ●

Wattyl Granosite®

Wattyl Granosite® has been leading specialist texture coating since 1952. Wattyl Granosite® offers the complete coating system that meets the challenges of evolving substrates and construction techniques.

GRANOSKIN MEMBRANE LOW PROFILE

GRANOCLASSIC SPRAY MEMBRANE

GRANOSAHARA FINE BRUSHED IMPACT

GRANOSTONE 1MM SATIN GLAZE

GRANOSORRENTO BRUSH ON MEMBRANE

GRANOSITE TEXTURE SMOOTH MEMBRANE

GRANOSORRENTO BAGGED IMPACT

GRANOMARBLE IMPACT

GRANOSORRENTO BRUSH ON MATT

WATTYL ULTRAEach product is formulated to provide specific performance benefits for the trade painter.

INTERIOR EXTERIORINTERIOR LOW VOC ENAMEL

WATER-BASED OIL-BASED

PREP+CEILING PREP CEILING PREP

Interiors Wet Areas Ceiling Preps + Ceiling

Water-Based Preps

Oil-Based Preps Doors/Trims Exteriors Textures

Wattyl Ultra ● ● ● ● ● ● ● ●

Wattyl Ultra is a premium professional paint system formulated with Ultra Finish Technology for superior application and a professional finish.

PREP - PSU

FASTBOND

EXTERIOR

SELFPRIMING

CEILING

MAXHIDE

PREP+CEILING

TIMESAVING

PREP - ASU

RAPIDCOVER

INTERIOR

SUPERCOVER

WATTYL TRADEA value for money paint range that delivers good coverage and is easy to apply.

Interiors Wet Areas Ceiling Preps + Ceiling

Water-Based Preps

Oil-Based Preps Doors/Trims Exteriors Textures

Wattyl Trade ● ● ● ● ●

INTERIOR INTERIOR INTERIOR/EXTERIOR INTERIOR/EXTERIOR

CEILING CEILING CEILING

PREP PREP

GECA AND APAS ACCREDITATION Wattyl is committed to global best practice, environmental performance and safe manufacturing.

GECA - Good Environmental Choice Australia is an internationally recognised sustainability rating system helping to improve environmental efficiencies in buildings and improving the health and well-being of our communities.

GECA certification standards are developed following ISO 14024 principles for global best practice in eco-labelling.

After a comprehensive assessment, a number of Wattyl paint products have been awarded an Australia Good Environmental Choice Licence.

APAS - Australian Paint Approval Scheme is the largest listing and accreditation scheme for the coatings industry.APAS tests and certifies paints and coatings to ensure they meet stringent performance specifications.

Inte

riors

Wet

Are

as

Ceili

ng

Prep

s +

Ceili

ng

Wat

er-B

ased

Pr

eps

Oil/S

olve

nt-

Base

d Pr

eps

Door

s/Tr

ims

Exte

riors

Text

ures

Wattyl I.D Advanced

● ● ●

Wattyl Prepcoats and Enamels

● ● ● ● ● ●

Wattyl Solagard® ● ●

Wattyl Granosite® ● ● ● ● ●

Wattyl Ultra

● ● ● ● ● ● ● ●

Wattyl Trade

● ● ● ● ●

WATTYL PRODUCT SOLUTION

GUIDE

For further information refer to the Technical Data Sheets available on our website.

Sherwin-Williams Australia. Level 4, 2 Burbank Place, Baulkham Hills NSW 2153. Sherwin-Williams New Zealand. 4-14 Patiki Road, Avondale.

11/18 WAT18009

AUS 132 101wattyl.com.au NZ 0800 825 7727wattyl.co.nz

WATTYL ASSIST

Don’t worry, whatever you need,

we can help.