pre-rinse assemblies premium pre-rinse assemblies - Encore
Transcript of pre-rinse assemblies premium pre-rinse assemblies - Encore
12 www.encoreplumbing.com Tel. 1.800.526.3694 Fax 1.732.364.8110
for low lead compliant models change series from “kn” to “kl” and visit our website for current list price.
PRE-RINSE ASSEMBLIES
Pre-Rinse Assembly is approximately 38”(965mm) high with a clearance height from underside of Pre-Rinse Spray Head to base of faucet of 10” (254mm) and an overhang projection distance from center-line of faucet to center-line of spray head assembly of 15”(381mm).
Pre-Rinse Assembly is approximately 35”(889mm) high with a clearance height from underside of Pre-Rinse Spray Head to center-line of faucet of 7”(178mm) and an overhang projection distance from center-line of faucet to center-line of spray head assembly of 15”(381mm).
Furnished with 1/2” NPS male inlets on 4”(102mm) centers with 1/4” NPT union tailpieces and mounting hardware
Furnished with 1/2” NPT female inlets
Available with ceramic valvesAll models shown include oPTIoNAL WALL BRACKET #K50-Y020
All “AF” suffix models with ADD-oN FAUCETS include WALL BRACKET #K50-Y0201-1/8” (29mm) hole for deck and backsplash is recommended to accommodate 1/2” supply nipples and 1-1/4”(32mm) hole for double pantry
Encore® Premium pre-rinse assemblies use Encore Premium hoses. See page 26
KN50 Single Hole Deck Mount Pre-Rinse KN53 Wall Mount, 8”(203mm) Adjustable Centers Pre-Rinse
Shown:KN50-1000-BRKC50-1000-BR
Shown:KN50-1000-AF1
Shown:KN53-1000-BRKC53-1000-BR
Shown:KN53-1000-AF1
Model
w/6”(152mm) add-on swing spout
KN53-1000-AF1
w/8”(203mm) add-on swing spout
KN53-1000-AF2
w/10”(254mm) add-on swing spout
KN53-1000-AF3
w/12”(305mm) add-on swing spout
KN53-1000-AF4
w/14”(356mm) add-on swing spout
KN53-1000-AF5
w/16”(406mm) add-on swing spout
KN53-1000-AF6
w/18”(457mm) add-on swing spout
KN53-1000-AF7
Model
without bracket, not shown
KN53-1000
with wall bracket as shown
KN53-1000-BR
with s/s spring & wall bracket
KN53-1000-BS
with stainless spring
KN53-1000-S
Model
without bracket, not shown
KN50-1000
with wall bracket as shown
KN50-1000-BR
with s/s spring & wall bracket
KN50-1000-BS
with stainless spring
KN50-1000-S
Model
w/6”(152mm) add-on swing spout
KN50-1000-AF1
w/8”(203mm) add-on swing spout
KN50-1000-AF2
w/10”(254mm) add-on swing spout
KN50-1000-AF3
w/12”(305mm) add-on swing spout
KN50-1000-AF4
w/14”(356mm) add-on swing spout
KN50-1000-AF5
w/16”(406mm) add-on swing spout
KN50-1000-AF6
w/18”(457mm) add-on swing spout
KN50-1000-AF7
PREMIUM PRE-RINSE ASSEMBLIES
All Stainless Steel Pre-RinseType 304/316 Stainless Steel Construction
Model KSS53-1000-BR
*See full stainless steel selection on page 23
13Tel. 1.800.526.3694 Fax 1.732.364.8110 www.encoreplumbing.com
CHG®
Water conserving aerators and laminar flow spout tips available upon request.
See Page 106 For Options
KN56, KN60 & KN66 Elevated Bridge Deck Mount Pre-Rinse
Model
With Wall Bracket as Shown
4” (102mm) Adjustable Centers
KN56-1000-BR
6” (152mm) Adjustable Centers
KN66-1000-BR
8” (203mm) Adjustable Centers
KN60-1000-BR
Without Bracket, not Shown
4” (102mm) Adjustable Centers
KN56-1000
6” (152mm) Adjustable Centers
KN66-1000
8” (203mm) Adjustable Centers
KN60-1000
KN56, KN66 and KN60 series are furnished with 1/2” NPS mounting hardware and are available with ceramic valves.
Pre-Rinse Assemblies are approximately 38”(965mm) high with a clearance height from underside of Pre-Rinse sprayhead to base of faucet of 10”(254mm) and an overhang projection distance from center-line of faucet to center-line of spray head assembly of 15”(381mm).
All models shown include oPTIoNAL WALL BRACKET #K50-Y020All “AF” suffix models with ADD-oN FAUCETS include WALL BRACKET #K50-Y020
*Additional ADD-oN FAUCETS available. SEE PAGE 291-1/8” (29mm) hole for deck and backsplash is recommended to accommodate 1/2” supply nipples.
Encore® Premium pre-rinse assemblies use Encore Premium hoses. See page 26
KN56, KN60 & KN66 Elevated Bridge Deck Mount Pre-Rinse, 12” (305mm) Add-On Swing Spout
Model Add-On Swing Spout
With Wall Bracket as Shown
4” (102mm) Adjustable Centers
KN56-1000-AF4 12”(305mm)
6” (152mm) Adjustable Centers
KN66-1000-AF4 12”(305mm)
8” (203mm) Adjustable Centers
KN60-1000-AF4 12”(305mm)
for low lead compliant models change series from “kn” to “kl” and visit our website for current list price.
Shown:KN56-1000-BR
Shown:KN60-1000-BR
Shown:KN66-1000-AF4
• Institutional quality, specification grade • Stress resistant hose for long life • Heat treated riser spring • Built-in check valves • Contemporary design • Designed for customizing
PREMIUM PRE-RINSE ASSEMBLIES
14 www.encoreplumbing.com Tel. 1.800.526.3694 Fax 1.732.364.8110
K50 Single Hole Deck Mount Swivel Arm Pre-Rinse
Model
With 12” (305mm) Swivel Arm, as Shown
K50-5526-12
With 18” (457mm) Swivel Arm, not Shown
K50-5532-18
K53 Wall Mount Swivel Arm Pre-Rinse
Model
With 12” (305mm) Swivel Arm, as Shown
K53-5526-12
With 18” (457mm) Swivel Arm, not Shown
K53-5532-18
Wall Mount Swivel Arm Pre-Rinse, 12” (305mm) Add-On Faucet
Model Add-On Swing Spout
With 12” (305mm) Swivel Arm, as Shown
K53-552612AF4 12” (305mm)
With 18” (457mm) Swivel Arm
K53-553218AF4 12” (305mm)
Single Hole Deck Mount Swivel Arm Pre-Rinse, 12” (305mm) Add-On Faucet
Model Add-On Swing Spout
With 12” (305mm) Swivel Arm, as Shown
K50-552612AF4 12” (305mm)
With 18” (457mm) Swivel Arm
K50-553218AF4 12” (305mm)
PRE-RINSE ASSEMBLIES
Double Pantry, Deck & Wall Mount With Swivel Arm
OPTIONAL ACCESSORIES
KN55 SERIES ADD-ON FAUCET
WITH SWING SPOUTExtends flexibility of Pre-Rinse
Assemblies by providing additional swivel spout
capability. Permits full spout swing without interference with riser pipe. Installation is easy, utilizing same water lines and controls as the
Pre-Rinse. Separate valve is used to control spout flow.
See Page 29 or Details
KN50-Y051SWIVEL JOINT
Allows hose to swivel 360°
on swivel arm pre-rinse.
Shown:K50-5526-12
Shown:K53-5526-12
Shown:K50-552612AF4
Shown:K53-552612AF4
• Heavy gauge swivel arm mated to a solid forged swivel elbow, designed to withstand the demands of commercial applications
• Available with 12” or 18” swing arm offering a full 360° rotation
• Furnished with both a conventional pattern spray head as well as exclusive Encore® water saver spray head• Wall Bracket included
• Includes a spray head hook which holds spray head away from work area when not in use
• Provides fast, secure installation
• Nylon reinforced hose is protected by heavy gauge, stainless steel shield complete with Encore’s exclusive strain relief spring, insuring long product life.
Available with ceramic valvesSwivel arm pre-rinse assemblies furnished with wall bracket #K50-Y020.
Shown with optional swivel arm support #K50-Y5001-1/8” (29mm) hole for deck and backsplash is recommended to accommodate 1/2” supply nipples.
Encore® Premium pre-rinse assemblies use Encore Premium hoses. See page 26
* 12” Pre-Rinse Assembly is approximately 33”(838mm) high with a clearance height from underside of Pre-Rinse Spray Head to base of faucet of 4”(102mm) and an overhang projection distance from center-line of faucet to center-line of spray head assembly of 12”(305mm).
**18” Pre-Rinse Assembly is approximately 39”(991mm) high with a clearance height from underside of Pre-Rinse Spray Head to base of faucet of 4”(102mm) and an overhang projection distance from center-line of faucet to center-line of spray head assembly of 18”(457mm).
*#K53-5026-12-Pre-Rinse Assembly is approximately 30”(762mm) high with a clearance height from underside of Pre-Rinse Spray Head to base of faucet of 1”(25mm) and an overhang projection distance from center-line of faucet to center-line of spray head assembly of 12”(305mm).
**#K53-5032-18-Pre-Rinse Assembly is approximately 36”(914mm) high with a clear-ance height from underside of Pre-Rinse Spray Head to base of faucet of 1”(25mm) and an overhang projection distance from center-line of faucet to center-line of spray head assembly of 18”(457mm).
PRE-RINSE ASSEMBLIESPREMIUM PRE-RINSE ASSEMBLIES
CHG®
Water conserving aerators and laminar flow spout tips available upon request.
.See Page 106 For Options
15Tel. 1.800.526.3694 Fax 1.732.364.8110 www.encoreplumbing.com
K56, K60, K66 Elevated Bridge Deck Mount Swivel Arm Pre-Rinse
Model
With 12” (305mm) Swivel Arm, as Shown
4” (102mm) Adjustable Centers
K56-5526-12
6” (152mm) Adjustable Centers
K66-5526-12
8” (203mm) Adjustable Centers
K60-5526-12
With 18”(457mm) Swivel Arm, not Shown
4” (102mm) Adjustable Centers
K56-5532-18
6” (152mm) Adjustable Centers
K66-5532-18
8” (203mm) Adjustable Centers
K60-5532-18
K56, K60, K66 Elevated Bridge Deck Mount Swivel Arm Pre-Rinse,
12” (305mm) Add-On Faucet
Model Add-On Swing Spout
With 12” (305mm) Swivel Arm, as Shown
4” (102mm) Adjustable Centers
K56-552612AF4 12” (305mm)
6” (152mm) Adjustable Centers
K66-552612AF4 12” (305mm)
8” (203mm) Adjustable Centers
K60-552612AF4 12” (305mm)
With 18”(457mm) Swivel Arm, not Shown
4” (102mm) Adjustable Centers
K56-553218AF4 12” (305mm)
6” (152mm) Adjustable Centers
K66-553218AF4 12”(305mm)
8” (203mm) Adjustable Centers
K60-553218AF4 12” (305mm)
Elevated Bridge Deck Mount Swivel Arm
PRE-RINSE ASSEMBLIES
Shown:K56-5526-12
Shown:K56-552612AF4
Shown:K60-5526-12
Shown:K66-5526-12
18” (457mm) Pre-Rinse Assemblies are approximately 39”(991mm) high with a clear-ance height from underside of Pre-Rinse Spray Head to base of faucet of 4”(102mm) and an overhang projection distance from center-line of faucet to center-line of spray head assembly of 18”(457mm).
18” (457mm) Pre-Rinse Assemblies are approximately 39”(991mm) high with a clearance height from underside of Pre-Rinse Spray Head to base of faucet of 4”(102mm) and an overhang projection distance from center-line of faucet to center-line of spray head assembly of 18”(457mm).
Available with ceramic valvesShown with optional swivel arm support #K50-Y500
All models shown include oPTIoNAL WALL BRACKET #K50-Y020.All “AF” suffix models with ADD-oN FAUCETS include WALL BRACKET #K50-Y020.
1-1/8” (29mm) hole for deck and backsplash is recommended to accommodate 1/2” supply nipples.
Encore® Premium pre-rinse assemblies use Encore Premium hoses. See page 26
• Heavy gauge swivel arm mated to a solid forged swivel elbow,
designed to withstand the demands of commercial applications
• Available with 12” or 18” swing arm offering a full 360° rotation
• Furnished with both a conventional pattern spray head as well as exclusive Encore® water saver spray head
• Wall Bracket included
• Provides fast, secure installation
• Includes a spray head hook which holds spray head away from work area when not in use
• Nylon reinforced hose is protected by heavy gauge, stain less steel shield complete with Encore’s exclusive strain relief spring, insuring long product life.
• Institutional quality, specification grade • Stress resistant hose for long life • Heat treated riser spring • Built-in check valves • Contemporary design • Designed for customizing
OPTIONAL ACCESSORIES
KN55 SERIES ADD-ON FAUCET
WITH SWING SPOUTExtends flexibility of Pre-Rinse
Assemblies by providing additional swivel spout
capability. Permits full spout swing without interference with riser pipe. Installation is easy, utilizing same water lines and controls as the
Pre-Rinse. Separate valve is used to control spout flow.
See Page 29 For Details
KN50-Y051SWIVEL JOINT
Allows hose to swivel 360°
on swivel arm pre-rinse.
PREMIUM PRE-RINSE ASSEMBLIES
16 www.encoreplumbing.com Tel. 1.800.526.3694 Fax 1.732.364.8110
Single Hole Deck Mount Pre-Rinse, 12” (305mm) Add-On Faucet
Model Add-On Swing Spout
With Wall Bracket as Shown
KN63-1000-AF4 12” (305mm)
Single Hole Wall Mount Pre-Rinse, 12” (305mm) Add-On Faucet
Model Add-On Swing Spout
With Wall Bracket as Shown
KN69-1000-AF4 12” (305mm)
Furnished with 1/2” NPS male inlet, 1/4” NPT union tailpiece and mounting hardware
Pre-Rinse Assembly is approximately 38”(965mm) high with a clearance height from underside of pre-rinse spray head to base of faucet of 10”(254mm) and an overhang projection distance from center-line of faucet to center-line of spray head assembly of 15”(381mm).
Furnished with 1/2” NPS nipple and mounting hardware
Pre-Rinse Assembly is approximately 35”(890mm) high with a clearance height from underside of pre-rinse spray head to center-line of faucet of 7”(178mm) and an overhang projection distance from center-line of faucet to center-line of spray head assembly of 15”(381mm).
OPTIONAL ACCESSORIES
KN55 SERIES ADD-ON FAUCET
WITH SWING SPOUTExtends flexibility of Pre-Rinse
Assemblies by providing additional swivel spout
capability. Permits full spout swing without interference with riser pipe. Installation is
easy, utilizing same water lines and controls as the Pre-Rinse.
Separate valve is used to control spout flow.
See Page 29 For Details
OPTIONAL TEMPERATURE
MIXING VALVE
order separately as Model No. KN63-Y005 or add Suffix “MV” to pre-rinse model no.
Single Hole & Single Handle Deck Mount
Available with ceramic valvesAll models shown include oPTIoNAL WALL BRACKET #K50-Y020.
All “AF” suffix models with ADD-oN FAUCETS include WALL BRACKET #K50-Y020.1-1/8” (29mm) hole for deck and backsplash is recommended to accommodate 1/2” supply nipples.
Encore® Premium pre-rinse assemblies use Encore Premium hoses. See page 26
Shown:KN63-1000-BR
Shown:KN69-1000-BR
Shown:KN63-1000-AF4
Shown:KN69-1000-AF4
for low lead compliant models change series from “kn” to “kl” and visit our website for current list price.
PRE-RINSE ASSEMBLIESPREMIUM PRE-RINSE ASSEMBLIES
KN63 Single Hole Deck Mount Pre-Rinse
Model
KN63-1000-BR With Wall Bracket as Shown
KN63-1000 Without Bracket, not Shown
KN63-1000BRMVWith Wall Bracket and Mixing Valve as Shown
KN69 Single Hole Wall Mount Pre-Rinse
Model
KN69-1000-BR With Wall Bracket as Shown
KN69-1000 Without Bracket, not Shown
CHG®
Water conserving aerators and laminar flow spout tips available upon request.
See Page 106 For Options
17Tel. 1.800.526.3694 Fax 1.732.364.8110 www.encoreplumbing.com
Furnished with 1/2” NPT female inlet, 1/2” nipple ell and mounting hardware
Furnished with 1/2” NPS male inlet and mounting hardware
Pre-Rinse Assembly is approximately 35”(890mm) high with a clearance height from underside of pre-rinse spray head to center-line of faucet of 7”(178mm) and an overhang projection distance from center-line of faucet to center-line of spray head assembly of 15”(381mm).
Pre-Rinse Assembly is approximately 35”(890mm) high with a clearance height from underside of pre-rinse spray head to center-line of faucet of 7”(178mm) and an overhang projection distance from center-line of faucet to center-line of spray head assembly of 15”(381mm).
Pre-Rinses for Use with Foot & Knee Valves
KN73 Deck Mount Pre-Rinse
Model
KN73-1000-BR With Wall Bracket as Shown
KN73-1000 Without Bracket, not Shown
Single Hole Wall Mount Pre-Rinse, 12” (305mm) Add-On Faucet
Model Add-On Spout Length
With Wall Bracket
KN71-1000-AF4 12” (305mm)
Single Hole Deck Mount Pre-Rinse, with 12” (305mm) Add-On Faucet
Model Add-On Swing Spout
With Wall Bracket
KN73-1000-AF4 12” (305mm)
Available with ceramic valvesAll models shown include oPTIoNAL WALL BRACKET #K50-Y020.
All “AF” suffix models with ADD-oN FAUCETS include WALL BRACKET #K50-Y020.1-1/8” (29mm) hole for deck and backsplash is recommended to accommodate 1/2” supply nipples.
Encore® Premium pre-rinse assemblies use Encore Premium hoses. See page 26
Shown:KN71-1000-BR
Shown:KN73-1000-BR
Shown:KN71-1000-AF4
Shown:KN73-1000-AF4
for low lead compliant models change series from “kn” to “kl” and visit our website for current list price.
OPTIONAL ACCESSORIES
KN55 SERIES ADD-ON FAUCET
WITH SWING SPOUTExtends flexibility of Pre-Rinse
Assemblies by providing additional swivel spout
capability. Permits full spout swing without interference with riser pipe. Installation is
easy, utilizing same water lines and controls as the Pre-Rinse.
Separate valve is used to control spout flow.
See Page 29 For Details
OPTIONAL TEMPERATURE
MIXING VALVE
order separately as Model No. KN63-Y005 or add Suffix “MV” to pre-rinse model no.
• Institutional quality, specification grade • Stress resistant hose for long life • Heat treated riser spring • Built-in check valves • Contemporary design • Designed for customizing
PREMIUM PRE-RINSE ASSEMBLIES
KN71 Single Hole Wall Mount Pre-Rinse
Model
KN71-1000-BR With Wall Bracket as Shown
KN71-1000 Without Bracket, not Shown
18 www.encoreplumbing.com Tel. 1.800.526.3694 Fax 1.732.364.8110
PRE-RINSE ASSEMBLIES
Pre-Rinse Assembly is approximately 38”(965mm) high with a clearance height from underside of Pre-Rinse Spray Head to base of faucet of 10” (254mm) and an overhang projection distance from center-line of faucet to center-line of spray head assembly of 15”(381mm).
Pre-Rinse Assembly is approximately 35”(889mm) high with a clearance height from underside of Pre-Rinse Spray Head to center-line of faucet of 7”(178mm) and an overhang projection distance from center-line of faucet to center-line of spray head assembly of 15”(381mm).
Furnished with 1/2” NPS male inlets on 4”(102mm) centers with 1/4” NPT union tailpieces and mounting hardware
Furnished with 1/2” NPT female inlets
Available with ceramic valvesAll models shown include oPTIoNAL WALL BRACKET #K50-Y020.
All “AF” suffix models with ADD-oN FAUCETS include WALL BRACKET #K50-Y020.1-1/8” (29mm) hole for deck and backsplash is recommended to accommodate 1/2” supply nipples and 1-1/4”(32mm) hole for double pantry.
Encore® Commercial pre-rinse assemblies are available with standard commercial hosesFor Encore Premium hoses see page 26
KC50 Commercial Single Hole Deck Mount Pre-RinseKC53 Commercial Wall Mount
8”(203mm) Adjustable Centers Pre-Rinse
Shown:KC50-1000-BR
Shown:KC50-1000-AF1
Shown:KC53-1000-BR
Shown:KC53-1000-AF1
Model
w/6”(152mm) add-on swing spout
KC53-1000-AF1
w/8”(203mm) add-on swing spout
KC53-1000-AF2
w/10”(254mm) add-on swing spout
KC53-1000-AF3
w/12”(305mm) add-on swing spout
KC53-1000-AF4
w/14”(356mm) add-on swing spout
KC53-1000-AF5
w/16”(406mm) add-on swing spout
KC53-1000-AF6
w/18”(457mm) add-on swing spout
KC53-1000-AF7
Model
without bracket, not shown
KC53-1000
with wall bracket as shown
KC53-1000-BR
Model
without bracket, not shown
KC50-1000
with wall bracket as shown
KC50-1000-BR
Model
w/6”(152mm) add-on swing spout
KC50-1000-AF1
w/8”(203mm) add-on swing spout
KC50-1000-AF2
w/10”(254mm) add-on swing spout
KC50-1000-AF3
w/12”(305mm) add-on swing spout
KC50-1000-AF4
w/14”(356mm) add-on swing spout
KC50-1000-AF5
w/16”(406mm) add-on swing spout
KC50-1000-AF6
w/18”(457mm) add-on swing spout
KC50-1000-AF7
COMMERCIAL PRE-RINSE ASSEMBLIES
19Tel. 1.800.526.3694 Fax 1.732.364.8110 www.encoreplumbing.com
KC56, KC60 Commercial Elevated Bridge Deck Mount Pre-Rinse
Model
With Wall Bracket as Shown
4” (102mm) Adjustable Centers
KC56-1000-BR
8” (203mm) Adjustable Centers
KC60-1000-BR
Without Bracket, not Shown
4” (102mm) Adjustable Centers
KC56-1000
8” (203mm) Adjustable Centers
KC60-1000
KC56 and KC60 series are furnished with 1/2” NPS mounting hardware and are available with ceramic valves.Pre-Rinse Assemblies are approximately 38”(965mm) high with a clearance height from underside of Pre-Rinse sprayhead to base of faucet
of 10”(254mm) and an overhang projection distance from center-line of faucet to center-line of spray head assembly of 15”(381mm).All models shown include oPTIoNAL WALL BRACKET #K50-Y020.
All “AF” suffix models with ADD-oN FAUCETS include WALL BRACKET #K50-Y020.*Additional ADD-oN FAUCETS available. SEE PAGE 29
1-1/8” (29mm) hole for deck and backsplash is recommended to accommodate 1/2” supply nipples
Encore® Commercial pre-rinse assemblies are available with standard commercial hosesFor Encore Premium hoses see page 26
KC56, KC60 Commercial Elevated Bridge Deck Mount Pre-Rinse, 12” (305mm) Add-On Swing Spout
Model Add-On Swing Spout
With Wall Bracket as Shown
4” (102mm) Adjustable Centers
KC56-1000-AF4 12”(305mm)
8” (203mm) Adjustable Centers
KC60-1000-AF4 12”(305mm)
Shown:KC56-1000-BR
Shown:KC60-1000-BR
COMMERCIAL PRE-RINSE ASSEMBLIES
Commercial Duty Pre-RInse Hoses
Commercial w/out Grip
Hose Length
Commercial w/Grip
Hose Length
Commercial withGrip & Universal
AdaptersHose
Length
KC50-Y010-20 14” (356mm) KC50-Y004-20 20” (508mm) KC50-Y004-20U 20” (508mm)
KC50-Y010-26 20” (508mm) KC50-Y004-26 26” (660mm) KC50-Y004-26U 26” (660mm)
KC50-Y010-44 38” (965mm) KC50-Y004-44 44” (1118mm) KC50-Y004-44U 44” (1118mm)
KC50-Y010-60 54” (1372mm) KC50-Y004-60 60” (1524mm) KC50-Y004-60U 60” (1524mm)
KC50-Y010-72 66” (1676mm) KC50-Y004-72 72” (1829mm) KC50-Y004-72U 72” (1829mm)
KC50-Y010-96 90” (2286mm) KC50-Y004-96 96” (2438mm) KC50-Y004-96U 96” (2438mm)
Shown:KC60-1000-AF4
20 www.encoreplumbing.com Tel. 1.800.526.3694 Fax 1.732.364.8110Tel. 1.800.526.3694
Deck Mount 4” (102mm) Adj. Centers Pot Filler
Model Valves
With Vacuum Breaker
KN56-3100-VB Ceramic
KN56-3000-VB Compression
Without Vacuum Breaker
KN56-3100 Ceramic
KN56-3000 Compression
Furnished with 1/2” nipples mounting hardware
Deck Mount Base Pot Filler
Model Valves
With Vacuum Breaker
KN73-3000-VB Compression
Without Vacuum Breaker
KN73-3000 Compression
Furnished with 1/4” NPT union tailpiece and mounting hardware. Note: Check valve not supplied with this model. Temperature mixing valve available pg. 102
• Built in check valves• 72” (1829mm) long stainless steel flexible hose
• Plastic coated wall hook with chrome plated base• 1/2” NPT female inlets
Double Pantry Deck Mount Pot Filler
Model Valves
With Vacuum Breaker
KN50-3100-VB Ceramic
KN50-3000-VB Compression
Without Vacuum Breaker
KN50-3100 Ceramic
KN50-3000 Compression
Furnished with 1/4” NPT union tailpieces & mounting hardware
Single Pantry Deck Mount Pot Filler
Model Valves
With Vacuum Breaker
KN63-3100-VB Ceramic
KN63-3000-VB Compression
Without Vacuum Breaker
KN63-3100 Ceramic
KN63-3000 Compression
Furnished with 1/4” NPT union tailpieces & mounting hardware
Encore® Deck and Wall Mount Pot Fillers with Swivel Hose, Hooked Spray Valve and Wall Hook
Available with or without Vacuum Breaker
Wall Mount Base Pot Filler
Model Valves
With Vacuum Breaker
KN71-3000-VB Compression
Without Vacuum Breaker
KN71-3000 Compression
Furnished with mounting hardware. Note: Check valve not supplied with this model
Single Wall Mount Pot Filler
Model Valves
With Vacuum Breaker
KN69-3100-VB Ceramic
KN69-3000-VB Compression
Without Vacuum Breaker
KN69-3100 Ceramic
KN69-3000 Compression
Furnished with mounting hardware
Wall Mount 8” (203mm) Adj. Centers Pot Filler
Model Valves
With Vacuum Breaker
KN53-3100-VB Ceramic
KN53-3000-VB Compression
Without Vacuum Breaker
KN53-3100 Ceramic
KN53-3000 Compression
Deck Mount 8” (203mm) Adj. Centers Pot Filler
Model Valves
With Vacuum Breaker
KN60-3100-VB Ceramic
KN60-3000-VB Compression
Without Vacuum Breaker
KN60-3100 Ceramic
KN60-3000 Compression
Furnished with 1/2” nipples and mounting hardware
All models shown with recommended vacuum breakerTemperature mixing valve available - see pre-rinse accessories section for additional options
for low lead compliant models change series from “kn” to “kl” and visit our website for current list price.
Shown:KN53-3000-VB
PRE-RINSE ASSEMBLIESPREMIUM PRE-RINSE ASSEMBLIES
21Tel. 1.800.526.3694 Fax 1.732.364.8110 www.encoreplumbing.com
• Built in check valves• 72” (1829mm) long stainless steel flexible hose
• Plastic coated wall hook with chrome plated base• 1/2” NPT female inlets
Wall Mount Base Utility Spray
Model Valves
With Vacuum Breaker
KN71-2000-VB Compression
Without Vacuum Breaker
KN71-2000 Compression
Furnished with mounting hardware. Note: Check valve not supplied with this model
Single Wall Mount Utility Spray
Model Valves
With Vacuum Breaker
KN69-2100-VB Ceramic
KN69-2000-VB Compression
Without Vacuum Breaker
KN69-2100 Ceramic
KN69-2000 Compression
Furnished with mounting hardware
Deck Mount 8” (203mm) Adj. Centers Utility Spray
Model Valves
With Vacuum Breaker
KN60-2100-VB Ceramic
KN60-2000-VB Compression
Without Vacuum Breaker
KN60-2100 Ceramic
KN60-2000 Compression
Furnished with 1/2” nipples and mounting hardware
Double Pantry Deck Mount Utility Spray
Model Valves
With Vacuum Breaker
KN50-2100-VB Ceramic
KN50-2000-VB Compression
Without Vacuum Breaker
KN50-2100 Ceramic
KN50-2000 Compression
Furnished with 1/4” NPT union tailpieces and mounting hardware
Encore® Deck and Wall Mount Utility Sprays with Swivel Hose, Angled Spray Valve and Wall Hook
Available with or without Vacuum Breaker
Deck Mount 4” (102mm) Adj. Centers Utility Spray
Model Valves
With Vacuum Breaker
KN56-2100-VB Ceramic
KN56-2000-VB Compression
Without Vacuum Breaker
KN56-2100 Ceramic
KN56-2000 Compression
Furnished with 1/2” nipples mounting hardware
Wall Mount 8” (203mm) Adj. Centers Utility Spray
Model Valves
With Vacuum Breaker
KN53-2100-VB Ceramic
KN53-2000-VB Compression
Without Vacuum Breaker
KN53-2100 Ceramic
KN53-2000 Compression
Deck Mount Utility Spray
Model Valves
With Vacuum Breaker
KN73-2000-VB Compression
Without Vacuum Breaker
KN73-2000 Compression
Furnished with 1/4” NPT union tailpiece and mounting hardware. Note: Check valve not supplied with this model. Temperature mixing valve available pg. 102
Single Pantry Deck Mount Utility Spray
Model Valves
With Vacuum Breaker
KN63-2100-VB Ceramic
KN63-2000-VB Compression
Without Vacuum Breaker
KN63-2100 Ceramic
KN63-2000 Compression
Furnished with 1/4” NPT union tailpieces and mounting hardware
KN50-Y02590° SWIVEL ELBoW
for use without vacuum breaker hose assembly in utility spray and pot
filler applications.
for low lead compliant models change series from “kn” to “kl” and visit our website for current list price.
All models shown with recommended vacuum breakerTemperature mixing valve available - see pre-rinse accessories section for additional options
1-1/8” (29mm) hole for deck and backsplash is recommended to accommodate 1/2” supply nipples and 1-1/4” (32mm) hole for double pantry.
Shown:KN53-2000-VB
PREMIUM PRE-RINSE ASSEMBLIES
22 www.encoreplumbing.com Tel. 1.800.526.3694 Fax 1.732.364.8110
K34 Series 3/4” (19mm) IPS Heavy-DutyHigh Volume Pre-Rinse
• The only heavy-duty commercial high volume backsplash faucet and Pre-Rinse combination available. Delivers high volume for quick filling of commercial Pot Washing sinks with the added feature of a Pre-Rinse Spray combination
• 3/4” IPS connection provides for full volume water capacity.
• Extra large diameter spouts offer unrestricted water flow and fast filling feature.
• Convenient and easy to use four post star handles provided as standard.
• Special heavy-duty spray assembly with strain relief bushings offer trouble-free service in abusive commercial environments.
• Each Pre-Rinse provided with in-line vacuum breaker which prevents backflow siphoning.
• Ideal for power pot washing sinks
• KN34 valve seat requires 3/4” hex wrench.
All models shown include optional wall bracket #K50-Y020.
Encore® Add-On Faucet Body For Quik-Fil™ 3/4” (19mm) Faucet Only
Model No. KN35-Y001
Encore 12” (305mm) Add-On Faucet Spout For
QUIK-FIL 3/4” (19mm)Faucet Only
Model No. KN34-Y012 10” (254mm), 14” (356mm) and 18” (457mm) Spouts
Also Available
Heavy-Duty 3/4” (19mm)
IPS Mounting Ells
Model No. KN40-3400• Sold as pairs• Solid brass ells supplied with washer and nuts• Specifically designed to fit within commercial sink backsplash• Provides quick and easy installation
Encore® QUIK-FIL™ 3/4” (19mm) IPS Wall Mount Pre-Rinse Combination
Model
With 10” (254mm) Spout and Wall Bracket-as Shown
K34-1010-BR
With 12” (305mm) Spout and Wall Bracket
K34-1012-BR
With 14” (356mm) Spout and Wall Bracket
K34-1014-BR
With 18” (457mm) Spout and Wall Bracket
K34-1018-BR
Shown:K34-1012-BR
PRE-RINSE ASSEMBLIESPREMIUM PRE-RINSE ASSEMBLIES
™
23Tel. 1.800.526.3694 Fax 1.732.364.8110 www.encoreplumbing.com
Stainless Steel Deck Mount Pre-Rinse Assembly
Model Add-On Swing Spout
KSS50-1000-BR (Shown)
KSS50-1000AF1 6” (152mm)
KSS50-1000AF4 12” (305mm)
Stainless Steel Wall Mount Pre-Rinse Assembly
Model Add-On Swing Spout
KSS53-1000-BR (Shown)
KSS53-1000AF1 6” (152mm)
KSS53-1000AF4 12” (305mm)
Stainless Steel Bridge Deck Mount Pre-Rinse Assembly
Model Add-On Swing Spout
KSS60-1000-BR (Shown)
KSS60-1000AF1 6” (152mm)
KSS60-1000AF4 12” (305mm)
Type 304/316 Stainless Steel ConstructionELIMINATE LEAD FROM YOUR PLUMBING
CHG has added a new series of Stainless Steel Plumbing
Fixtures to the Encore® Premium Plumbing line, which are
designed to meet or exceed evolving Low Lead and No
Lead standards in the U.S. and abroad, such as California
(AB1953) and Vermont (S152). The federal Safe Drinking
Water Act strictly regulates the amount of lead permitted to leach from end point devices
in potable water supplies and establishes ANSI/NSF
61 - Section 9 Annex G as the performance testing standard.
These durable Encore faucets and pre-rinse units feature Type 304/316 stainless steel
construction throughout, which eliminates the lead found in competing brass products and exceeds the testing
parameters to meet NSI/NSF61 – Section 9 Annex G.
PRE-RINSE ASSEMBLIES• E-Z mount wall bracket
• 1/4-Turn Compression Cartridges with S/S components• Low Flow 1.2 GPM @ 60 PSI Pre-Rinse Spray Valve also available • In-line check valves prevent cross-flow and backflow siphoning
TOP-LINE® ECONOMICAL PRE-RINSEK13, TL50 and TL61 SERIES
Shown:KSS50-1000-BR
Shown:KSS53-1000-BR
Shown:KSS60-1000-BR
For our complete list of stainless steel products See Pages 100-101.
PRE-RINSE ASSEMBLIES
K13 Series 8” (203mm) Wall Mount Pre-Rinse with Wall Bracket
Model K13-1000-BR
With Add-On Faucet and Spray Valve
Model Add-On Spout
K13-1006-BR 6” (152mm)
K13-1008-BR 8” (203mm)
K13-1010-BR 10” (254mm)
K13-1012-BR 12” (305mm)
K13-1014-BR 14” (356mm)
K13-1016-BR 16” (406mm)
TL50 Series Double Pantry Deck Mount Pre-Rinse with Wall Bracket
Model TL50-1000-BR
With Add-On Faucet and Spray Valve
Model Add-On Spout
TL50-1000-AF1 6” (152mm)
TL50-1000-AF2 8” (203mm)
TL50-1000-AF3 10” (254mm)
TL50-1000-AF4 12” (305mm)
TL50-1000-AF5 14” (356mm)
TL61 Series 8” (203mm) Deck Mount Pre-Rinse with Wall Bracket
Model TL61-1000-BR
With Add-On Faucet and Spray Valve
Model Add-On Spout
TL61-1000-AF1 6” (152mm)
TL61-1000-AF2 8” (203mm)
TL61-1000-AF3 10” (254mm)
TL61-1000-AF4 12” (305mm)
TL61-1000-AF5 14” (356mm)
24 www.encoreplumbing.com Tel. 1.800.526.3694 Fax 1.732.364.8110
Encore® Pre-Rinse Top Half
Encore Pre-Rinse Bottom Half
for low lead compliant models change series from “kn” to “kl” and visit our website for current list price.
Pre-Rinse Top Half, Riser, Hook, Spring, Wall Bracket, Hose & Spray Valve
Model KN50-Y000-PRB
Faucets on Pages 12-21Use the Following 1/4 Turn Cartridges:
KN50-Y006 Compression Cold
KN50-Y007 Compression Hot
KN50-Y006-CCV Ceramic Cold
KN50-Y007-CCV Ceramic Hot
KN55 Add-on Faucet uses KN55-Y010 cartridge
Pre-Rinse Top Half, 12”(305) Swivel Arm, Hook, Spring, Wall Bracket, Hose & Spray Valve
Model KN50-Y2612RPB
Single Handle Wall Mount Body Only
Model KN69-Y001
Single Pantry Body Only
Model KN63-Y001
Double Pantry Body Only
Model KN50-Y001
8” (203mm) Wall Mount Body Only
Model KN53-Y001
6” (152mm) Bridge Deck Mount Body Only
Model KN66-Y003
4” (102mm) Bridge Deck Mount Body Only
Model KN56-Y003
8” (203mm) Bridge Deck Mount Body Only
Model KN60-Y001
Add-On Faucet Body Only
Model KN55-Y001
Single Wall Mount Post Only
Model KN50-X124
Single Deck Mount Post Only
Model KN50-X126
PRE-RINSE ASSEMBLIESPRE-RINSE ACCESSORIES
25Tel. 1.800.526.3694 Fax 1.732.364.8110 www.encoreplumbing.com
Pre-Rinses, Components and Bodies
Encore® QUIK-FIL™ 3/4”Pre-Rinse Top Half
Quik-Fil 3/4” (19mm) Pre-Rinse Top Half, Riser, Hook, Spring, Wall Bracket,
Hose & Spray Valve
Model K34-Y000-PRB
TOP-LINE® Economical Pre-Rinse Top HalfPre-Rinse Top Half, Riser, Hook, Spring, Wall
Bracket, Hose & Spray Valve
Model K13-Y000-PRB
Encore QUIK-FIL Bottom Half of Pre-Rinse
8” (203mm) Wall Mount QUIK-FIL 3/4” (19mm) IPS Pre-Rinse Body
with Cross Handles
Model KN34-Y001
TOP-LINE Economical Pre-Rinse Bottom Half w/ Check Valves
8” (203mm) Wall Mount TOP-LINE® Pre-Rinse Body
Model KN13-Y001-CV
Deck Mount QUIK-FIL 3/4” (19mm) IPS Single with Cross Handle Pre-Rinse Post
Model KN33-Y001
QUIK-FIL 3/4” (19mm) Add-On Faucet
Model KN35-Y001
QUIK-FIL 3/4” (19mm) Add-On Faucet with Spout
Model Spout Size
KN35-7010 10” (254mm)
KN35-7012 12” (305mm)
KN35-7014 14” (356mm)
KN35-7018 18” (457mm)
TOP-LINE Add-on Faucet with Spout
Model Add-On Swing Spout
K13-7006 6” (152mm)
K13-7008 8” (203mm)
K13-7010 10” (254mm)
K13-7012 12” (305mm)
K13-7014 14” (356mm)
K13-7016 16” (406mm)
Quik-Fil™ 3/4” (19mm) Mounting Kit
Model KN40-3400
PRE-RINSE ACCESSORIES
Rigid Tee Water Supply Kit
Model K50-0500
For use on pre-rinse units
26 www.encoreplumbing.com Tel. 1.800.526.3694 Fax 1.732.364.8110
Encore Commercial Hose Assemblies
Commercial w/Grip
Hose Length
Commercial w/out Grip
Hose Length
Commercial Universal Fit
w/GripHose
Length
KC50-Y004-20 20” (508mm) KC50-Y010-20 14” (356mm) KC50-Y004-20U 20” (508mm)
KC50-Y004-26 26” (660mm) KC50-Y010-26 20” (508mm) KC50-Y004-26U 26” (660mm)
KC50-Y004-44 44” (1118mm) KC50-Y010-44 38” (965mm) KC50-Y004-44U 44” (1118mm)
KC50-Y004-60 60” (1524mm) KC50-Y010-60 54” (1372mm) KC50-Y004-60U 60” (1524mm)
KC50-Y004-72 72” (1829mm) KC50-Y010-72 66” (1676mm) KC50-Y004-72U 72” (1829mm)
KC50-Y004-96 96” (2438mm) KC50-Y010-96 90” (2286mm) KC50-Y004-96U 96” (2438mm)
Encore® Premium hose assemblies are constructed with a strong, flexible stainless steel outer casing over a nylon reinforced Santoprene®* core. The Encore Premium Pre-Rinse Hose has been especially designed to significantly minimize any incidence of failure. At the point where most other hoses fail, Encore has added a strain relief coil of .125 (3mm) diameter chrome plated wire. This special coil transfers the load stress away from the part of the hose most subject to flexing and distributes it evenly over an extended area, thus adding significantly to the life of the hose. When you want the best hose on the market specify Encore Premium hose assemblies.
Encore Premium Hose Assemblies
Premium w/Grip
Hose Length
Premium w/out Grip
Hose Length
Premium Universal Fit
w/GripHose
Length
KN50-Y004-20 20” (508mm) KN50-Y010-20 14” (356mm) KN50-Y004-20U 20” (508mm)
KN50-Y004-26 26” (660mm) KN50-Y010-26 20” (508mm) KN50-Y004-26U 26” (660mm)
KN50-Y004-44 44” (1118mm) KN50-Y010-44 38” (965mm) KN50-Y004-44U 44” (1118mm)
KN50-Y004-60 60” (1524mm) KN50-Y010-60 54” (1372mm) KN50-Y004-60U 60” (1524mm)
KN50-Y004-72 72” (1829mm) KN50-Y010-72 66” (1676mm) KN50-Y004-72U 72” (1829mm)
KN50-Y004-96 96” (2438mm) KN50-Y010-96 90” (2286mm) KN50-Y004-96U 96” (2438mm)
Encore Commercial pre-rinse hoses are an economical alternative to other manufacturers’ hoses. Encore Commercial hoses offer the same feaures as the competition, but at an ecomonical price.
All models above replace all major manufacturer pre-rinse hoses
All models above replace all major manufacturer pre-rinse hoses
PRE-RINSE ACCESSORIESPRE-RINSE ASSEMBLIESPRE-RINSE ACCESSORIES
44” (1118mm) Hose Assembly withContinuous Pressure In-Line Vacuum Breaker
Model K50-Y016-44
For use on Pre-Rinse units where additional backflow prevention is desirable. Prevents the flow of contaminated water into the safe water drinking supply.
Other lengths available on application. 44” (1118mm) is the standard length on all Encore® pre-rinse units
*Santoprene® is a registered trademark of Exxon Mobile Corporation
27Tel. 1.800.526.3694 Fax 1.732.364.8110 www.encoreplumbing.com
PRE-RINSE ASSEMBLIES PRE-RINSE ACCESSORIES
Kool Grip™
Model KN50-X025
44” (1118mm) Hose with Spray and Kool Grip™
Model KN50-Y004-44S
Spray Head Repair Kit
Model KN50-0200
Without Valve KN50-0300-PS
Spray Valve Assemblies
Model
Pre-Rinse Spray Valve, 3.3 GPM
A. KN50-Y002
Low Flow Spray Valve, 1.2 GPM
B. KN50-Y002-12
Angled Spray Valve, 3.3 GPM
C. KN50-Y030
Pot Filler Spray Valve Assembly
D. KN50-Y031
Select-A-Spray™ 5 Pattern Spray Head
E. KN50-Y102
Includes 5 different spray patterns. Retrofits all makes of pre-rinses.
A C D EB
Spray Valve Kits
Model
Low Flow (0.65) GPM @ 60PSI Pre-Rinse Kit
KN50-0220-065 KL50-0220-065 - Low Lead
Low Flow (1.2) GPM @ 60PSI Pre-Rinse Kit
KN50-0220-12 KL50-0220-12 - Low Lead
Low Flow (1.6) GPM @ 60PSI Pre-Rinse Kit
KN50-0220-16 KL50-0220-16 - Low Lead
Pre-Rinse Spray Assembly complete with grip and adapters to fit other manufacturer’s hoses.
Universal 3.3 GPM @ 60PSI Pre-Rinse Kit
KN50-0220 KL50-0220 - Low Lead
Pre-Rinse Spray Assembly complete with grip and adapters to fit other manufacturer’s hoses.
Select-A-Spray Pre-Rinse Kit
KN50-0210
Pre-Rinse Spray Assembly complete with grip and adapters to fit other manufacturer’s hoses.
TOP-LINE® Economical Spray Valve
K13-Y003
28 www.encoreplumbing.com Tel. 1.800.526.3694 Fax 1.732.364.8110
Wall Bracket
Model K50-Y020
Assembly includes 12”(305mm) nipple which may be cut to permit adjustments between 2” and 12”(51mm and 305mm). New compression fitting allows fast, positive connection.
Heavy Duty Swivel Arm Support
Model K50-Y500
Easily mounts to riser pipe and swivel arm. Allows full swing while providing additional support when Pre-Rinse is exposed to severe field use.
Wall Faucet Mounting Kit
Model KN40-1000
Kit has been designed for simple installation of wall faucets within the standard backsplash space. Contains two each of 1/2” NPS nipples, 1/2” NPT x 1/2” sweat ells, washers and locknuts. Low lead version available use # KL40-1000.
Deck Faucet Mounting Kit
Model KN60-Y010
Kit has been designed for simple installation of deck faucets. Contains two each of 1/2” NPS nipples, washers and locknuts.
PRE-RINSE ASSEMBLIESPRE-RINSE ACCESSORIES
Replacement Spring-Conventional Chrome Plated
Model K50-X033
Heavy-duty gooseneck spring, heat treated, nickel plated... ensures convenient hose position and flexibility.
Model K50-X178
Heavy-duty Solid Stainless Steel Gooseneck Spring, heat treated, ensures convenient hose position and flexibility.
Wall Mount Kit
Model KN40-2020
Installation Kit for Back Mount Faucets
Swivel Arm Assembly
Model Length
KN50-Y050-12 12” (305mm)
KN50-Y050-18 18” (457mm)
Hook-Screw Assembly
Model K50-Y011
Wall Hook
Model K50-Y012
Permits spray valves to be conveniently hung in place when not in use. Furnished with chrome plated base and coated hook.
Spring Retainer
Model Description
KN50-X032
KN50-X032-SS Stainless Steel
Riser Pipe
Model Length
KN50-X153-5 5” (127mm)
KN50-X153-7 7” (178mm)
KN50-X153-8 8” (203mm)
KN50-X153-12 12” (305mm)
KN50-X153-14 14” (357mm)
KN50-X077 18” (457mm)
KN50-X029 24” (610mm)
KN50-X153-26 26” (660mm)
KN50-X153-32 32” (813mm)
Quick Disconnect
Model Description
KL50-QDISKTS Retrofit Kit for T&S
KL50-QDISKFM Retrofit Kit for Fisher
Rigid Tee Water Supply Kit
Model K50-0500
29Tel. 1.800.526.3694 Fax 1.732.364.8110 www.encoreplumbing.com
DD Sprayer with Aerator
Model KN50-Y402
DD Sprayer with Rose Spray
Model KN50-Y403
Button Valve
Model KN50-Y027
Kit contains all parts to completely replace pre-rinse button valve assembly
or knee/foot valve ass’y
44” (1118mm) DD Hose and Spray
Model KN50-Y400-44
37” (940mm) Stainless Steel Flexible DD Hose Only
Model KN50-Y410-44
QUIK-WASH™ Hand Wash Faucet Control
Model KN91-0100
PRE-RINSE ACCESSORIES
Pot Filler Outlet Control Valve
Model KPV-X001
*Attaches to end of spout
KN55 Series Add-On Faucet w/Swing Spout
Model Swing Spout
KN55-7006 6” (152mm)
KN55-7008 8” (203mm)
KN55-7010 10” (254mm)
KN55-7012 12” (305mm)
KN55-7012-DJ 12” (305mm) Double Jointed
KN55-7014 14” (356mm)
KN55-7016 16” (406mm)
KN55-7018 18” (457mm)Double Jointed
45° Supply Inlet
Model K50-Y047
Male inlet for use with 45° mounting surface. 1/2” male IPS.
Adjustable Supply Inlets
Model Eccentric Total Range 2 (Inlets)
A. KN60-Y004 1/2” (13mm) 1” (25mm)
B. KN60-Y005 1” (25mm) 2” (51mm)
C. KN60-Y006* None N/A
*KN60-Y006 is supplied on all Encore wall mount faucets and pre-rinse units.**Each Inlet also provides an additional plus or minus 1/4”(6mm) compensation to accommodate varying field conditions.
Choice of inlets permit easy, fast installation by providing adjustability of different faucet or pre-rinse centers to match varying installation (piping) centers.
A BC
Spout Extension
Model Spout Length
KN11-X106 6” (152mm)
KN11-X112 12” (305mm)
Adds flexibility to accommodate almost any swivel Spout length requirement. Fits all Encore® and ToP-LINE™ faucets and accepts all Encore and TOP-LINE Swivel Spouts.
Add-on Faucet extends flexibility of pre-rinse assemblies by providing additional swivel spout capability. The only add-on faucet designed specifically to permit full spout swing without interference with riser pipe. Installation is easy, utilizing same water lines and controls as the pre-rinse. Separate valve is used to control spout flow.
30 www.encoreplumbing.com Tel. 1.800.526.3694 Fax 1.732.364.8110
Designer Handles
Model Description
K50-X117 (1 Pair) Chrome Plated
K50-X080 (1 Pair) Die Cast
Chrome plated acrylic in smart, contemporary design. Smooth, secure grip. May be used on any Encore faucet or pre-rinse unit.
Cross Handle Replacement Kit
Model K50-0111 (1 Pair)
Chrome plated cross handles are available for all Encore faucets and pre-rinse units. Kit includes two handles, hot and cold indicators and screws.
Faucet Handle Repair Kit
Model K50-0110-PR (1 Pair)
Wrist Blade Handles
Model Size
K50-0001 (1 Pair) 4” (102mm)
K50-0001-6 (1 Pair) 6” (152mm)
Solid brass chrome plated wrist blades are available for deck and wall mount faucets. Kit includes two blades, hot and cold indicators and screws.K11 Series 8” deck faucet utilizes optional Model No. K11-0001 Wrist Blade Handles.
KN33 Series
Model Valves
A. KN34-Y007 Single
KN34 Series
Model Valves
B. KN34-Y006 Cold
KN34-Y007 Hot
S/S seats for 3/4” faucet KN34-X009-SS
KN35 Series
Model Valves
C. KN35-Y007 Add-on
S/S seats for 3/4” faucet KN35-X010-SS
KN41 & KN45 Series*
Model Valves
D. KN41-Y006 Cold
KN41-Y007 Hot
KN55 Series
Model Valves
E. KN55-Y011 Cold
KN55-Y010 Hot *Available with ceramic valves...Add Suffix-CV to part no.
PRE-RINSE ASSEMBLIES
KN50 Series Hot Cartridge Compression
Model KN50-Y007
KN50 Series Cold Cartridge Compression
Model KN50-Y006
KN50 Series Hot Cartridge Ceramic
Model KN50-Y007-CCV
KN50 Series Cold Cartridge Ceramic
Model KN50-Y006-CCV
KN50 Series Hot Cartridge Compression With Handle
Model KN50-Y007-KT
KN50 Series Cold Cartridge Compression With Handle
Model KN50-Y006-KT
KN50 Series Hot Cartridge Ceramic With Handle
Model KN50-Y007CVKT
KN50 Series Cold Cartridge Ceramic With Handle
Model KN50-Y006CVKT
PRE-RINSE ASSEMBLIESPRE-RINSE ACCESSORIES
Encore® Repair KitsReplacement Valve Assembly and Handles