PPOm PPOm GF30

Mechanical Units

Specific Gravity 1.08 1.28 ASTM-D792

Tensile Strength Psi 9,200 15,000 ASTM-D638

Tensile Elongation % 25 5 ASTM-D638

Tensile Modulus of Elasticity Psi 370,000 ASTM-D638

Flexural Strength Psi 14,400 23,500 ASTM-D790

Flexural Modulus of Elasticity Psi 370,000 1,035,000 ASTM-D790

Compressive Strength Psi - - ASTM-D695

Izod Notched Impact ft.-lb./in. 3.5 2.2 ASTM-D256

Rockwell Hardness M, L or R scale R119 L108 ASTM-D785

ThermalCoefficient of Linear Thermal Expansion in./in./deg F 3.3 x 10-5 1.45 x 10 -5 ASTM-D696

Max. Continuous Use Temp. °F 230 230 APEXCO Exp.

Heat Deflection Temp. @ 264 psi °F 254 280 ASTM-D648

Melting Point °F 490 490 ASTM-D3418

Electrical Electrical Dielectric Strength-Short Term volts/mil 500 550 ASTM-D149

Dielectric Constant @ 60 Hz 2.7 2.9 ASTM-D150

Dielectric Constant @ 106 Hz - - ASTM-D150

Dissipation Factor @ 60 Hz 0.0007 0.0009 ASTM-D150

Volume Resistivity ohm-cm Minimum 1.E+15 Minimum 1.E+16 ASTM-D257

MiscellaneousWater Absorption/24 hrs. % weight 0.07 0.06 ASTM-D570

Water Absorption @ Saturation % weight - - ASTM-D570

Flammability V-0 (0.24") HB UL-94

Dynamic Coefficient of Friction

APEXCO-PPSi makes no warranty of any kind as to the information provided herein, either express or implied, including, without limitation, fitness for a particular purpose. APEXCO-PPSi believes that all physical property data and other technical information and specifications contained in this document are the best available on the

product or material at the time of publication. However, this information is intended merely as a guideline. Persons intending to use this information or specifications should first satisfy themselves that the products and their features/properties are suitable for their intended uses and applications, and meet all appropriate safety, health or other applicable standards. APEXCO-PPSi does not guarantee the effectiveness or safety of any possible or suggested design for articles of manufacture as

illustrated herein by any photograph, technical drawing or the like. It is the end user's sole responsibility to execute performance testing on the finished part in the actual or intended application. APEXCO-PPSi makes no warranty as to this information's accuracy or completeness. APEXCO-PPSi shall not be liable in contract, tort or otherwise for incidental, consequential, special, exemplary, indirect or punitive damages, including, without limitation, loss of business, lost profits or damage or

destruction of data, related to a person’s use of the information contained herein. Nothing herein waives any of the seller's terms and conditions of sale. References to products not manufactured by APEXCO-PPSi are not intended as an endorsement of those products nor do they suggest an unsuitability of other similar products.