PowerIndustry Solutions...3M Cold Shrink Termination Kits ( For XLPE, Screened Armoured Cables ) 3M...

3M Electrical

2010

Global Capability. Local Back Up.

IndustrySolutions

Power

3M™Cold Shrink

Joints & Termination8

36

3M™Cold Shrink

End Caps & Cable Abandonement Kits

18

Scotch Aerosols,3M™

Sprays & Coatings

Wire Lubricants

34

Resin Joint KitsScotchcast™3M™

26

3M™

Electrical Spring ConnectorsScotchlok

40

Heat Shrink3M™

20

3M™ Cable &

38

Separable Connectors3M™

14

with Quality TapesInsulate & Protect

30

Ditection of overheating in electrical equipment and wiring

3M™ Infrared Thermometers

43

ContentsContents

Scotchflex3M™Cable Ties

Springs3M™

Constant Force42

3M - A Global, Diversified Technology Company

Everyday, 3M people find new ways to make amazing things happen. Wherever they are, whatever they do, the company’s customers know they can rely on 3M to help make their lives better. 3M’s brands include Scotch, Post-it, Scotchgard, Thinsulate, Scotch-Brite, Filtrete, Command and Vikuiti. Serving customers in more than 200 countries around the world, the company’s 67,000 people use their expertise, technologies and global strength to lead in major markets including consumer and office; display and graphics; electronics and telecommunications; safety, security and protection services; health care; industrial and transportation. For more information, including the latest product and technology news, visit www.3m.com.

Scotch, Post-it, Scotchgard, Thinsulate, Scotch-Brite, Filtrete, Command and Vikuiti are trademarks of 3M.

3M produces over 70,000 existing products many of which are designed specifically for the electrical, electronics and telecommunications industries.

We invest in over $1 Billion a year on R & D and employ over 7,000 research engineers dedicated to meeting your needs. By working closely with our customers we are able to apply our vast experience in cutting edge technologies where it counts the most: optimizing your product or system capabilities. Working with 3M you’re on the receiving end of the unrivalled support of a global company - with a strong local presence. Our manufacturing facilities are ISO 9002 certified and our sites locations are ISO 9001 certified. Moreover, all our products are independently tested to the major industry standards.

3M - Global Capability, Local Back Up

4 5

3M™ Cold Shrink

3M™ Cold Shrink Joint

3M™ Cold ShrinkMedium Voltage Joints & Terminations

No HeatNo FlamesNo Special Tools

No ShovingSplice bodies 100%

factory tested -ensures reliability

CapacitiveStress Relief

Unique innerelectrode design

Connector

Silicone insulation

Silicone bodyprovides excellent

electrical properties

Outer semicon layer

One piece design

Capacitative stress relief

Unique 3M™ Cold Shrink™delivery system requires

no pushing heat or flames

Expanded silicone rubber on removable plastic core. 3M™ Cold Shrink technology utilizes an expanded silicone rubber material on removable plastic core. The core is removed by simply unwiding.

Compact Design. Because of superior material used in 3M™ Cold Shrink™ terminations, tails lengths may be reduced and less space is required.

Accomodates a wide range of sizes. Because the expanded silicone material technology, one kit fits a wide range of cable sizes, resulting in reduced inventory.

Superior silicone material. Silicone has unique properties as an insulator. Its smooth surface ensures that the minimum amount of contamination adheres to the surface. It is also inorganic and hydrophobic, (water beads form and run off). 3M silicone materials has these unique benefits for outdoor termination applications.

Cable Accessories

3M™ Cold Shrink Outdoor Termination

No HighInstallation CostNo Special Training

No PushingUnsurpassed Reliability. 3M TM Cold Shrink technology has been proven over the last 35 years. Silicone body delivers excellent electrical performance. Splice bodies are 100% factory tested. 3M TM Cold Shrink technology deliver s increased radial interface pressure for improved long term reliability. 3M TM Cold Shrink TM technology is field proven by major Middle East Power utilities.

Simplified Installation. 3M TM Cold Shrink TM technology utilises a one piece splice body for splicing cable from 6,6-36kv. Taping of phases in terminations has been eliminated by the use of a one piece 3M TM Cold Shrink silicone rubber tube which includes stress control, 3M Quick Term II technology.

Forget Heat, flames or shoving. 3M TM Cold Shrink technology is based on a removable plastic core. There is no need for gas cylinders or torches – simply unwind the core.

Unique 3M™ Cold Shrink™ delivery system requires no pushing, heat or flame

Skirted Silicone Insulator

Silicone Insulator with built in Stress Control Tube

3M™ Cold Shrink™ silicone cable breakout boot

COnstant force spring

Earth Braid

Hydrophobic behaviour of 3M Silicon

e

3M™ Cold Shrink

6 7

3M™Cold Shrink

Joints & Terminations

VOLTAGE

15kV

20kV

36kV

CABLE SIZE

25 – 95 mm2

120 – 240 mm2

300 – 500 mm2

600 – 1000 mm2

35 – 70 mm2

95 – 185 mm2

240 – 400 mm2

630 mm2

25 – 35 mm2

50 – 150 mm2

185 – 300 mm2

25 – 35 mm2

50 – 150 mm2

185 – 300 mm2

25 – 95 mm2

70 – 150 mm2

185 – 300 mm2

400 – 800 mm2

25 – 95 mm2

70 – 150 mm2

185 – 300 mm2

400 - 800 mm2

25 – 70 mm2

95 – 240 mm2

300 – 400 mm2

25 – 70 mm2

95 – 240 mm2

300 – 400 mm2

35 – 95 mm2

120 – 185 mm2

240 – 500 mm2

630 mm2

35 – 95 mm2

120 – 185 mm2

240 – 500 mm2

630 mm2

25 – 120 mm2

150 – 240 mm2

300 mm2

25 – 120 mm2

150 – 240 mm2

300 mm2

DESCRIPTION

Indoor

Outdoor

Indoor

Outdoor

Indoor

Outdoor

Indoor

Outdoor

Indoor

Outdoor

Indoor

Outdoor

NO. CORES

1

1

3

3

1

1

3

3

1

1

3

3

3M KIT

92-EB 62-1 META92-EB 63-1 META92-EB 64-1 META92-EB 65-1 META


92-EB 62-3 META92-EB 63-3 META92-EB 64-3 META










3M™ Cold Shrink Termination Kits ( For XLPE, Screened Armoured Cables )

3M™ Cold Shrink

Paper Termination Kits ( For Belted, PILC MIND Cable )

70 - 300 mm2

35 – 70 mm2

Indoor

Outdoor

3

3

MT - 16

MO - 16

VOLTAGE

15kV

CABLE SIZEDESCRIPTIONNO. CORES 3M KIT

3M™ Cold Shrink MV TerminationsThe one-piece design of this cable termination, manufactured with a specially formulated silicone material, reduces the likelihood of tracking, is UV stable and adverse to water (hydrophobic). The cold shrink medium voltage terminations are available for indoor and outdoor applications for single core and 3-core cables up to 46kV.

8 9

3M™ Cold Shrink MV Joints The QS 2000 E splice body is a prefabricated elastomeric cold shrink 3-layer construction silicone product. The inner refractive stress control layer and the silicone insulation layer are co-extruded during the manufacturing process and the conductive outer screen is painted and vulcanized to provide proper shielding of electromagnetic field. The splice body is designed to accommodate all industrial available cable conductor connecting methods like hexagonal or deep indent crimping technologies or big variety of mechanical share-off connecting technologies. The electrical filed around the cable conductor connection needs to be smoothened by using conductive tape to avoid any significant increase of electrical stress in the cable connector area.

For different applications 3M offers many alternative cable screen connection systems and/or re-jacketing systems to meet customer requirement with possible best solutions.

Our Medium voltage range is comprehensive and at 3M, we recognize that many projects and applications require a customized solution to meet your needs. Please contact 3M Electrical Markets Division for solutions, technical support, product evaluation, product demonstration and training.

Cold Shrink Joint SystemImprove reliability, reduce time, labour, and overall cost with our wide range of one-piece joint bodies. Fits cable sizes from 50mm2 up to 1000mm2 (11kV up to 36kV).

3M KITCABLE SIZE

11kV

20kV

36kV

92-AS 610-1 ME92-AS 620-1 ME92-AS 630-1 ME

92-AS 610-3 ME92-AS 620-3 ME

93-AS 620-1 ME93-AS 630-1 ME

93-AS 620-3 ME

94-AS 620-1 ME94-AS 630-1 ME

94-AS 620-3 ME94-AS 630-3 ME

50 -150 mm2

120 -400 mm2

500 - 1000 mm2

50 - 150 mm2

120 - 300 mm2

50 - 300 mm2

500 - 1000 mm2

50 - 300 mm2

50 - 185 mm2

240 - 1000 mm2

50 - 185 mm2

240 - 1000 mm2

1

3

1

3

1

3

VOLTAGE NO. CORES

3M™ Barrier Boot System 92-EE717-1The 3M Barrier Boot System 92EE717-1 consists of a one piece EPDM rubber body suitable for operating wet indoors under conditions of ambient temperature and loading. The barrier boot is designed to accommodate bushings of cast resin or porcelain type with diameters between 40.0-70.0mm and is intended for Coldshrink terminations of power cables up to 15kV with extruded insulation from 50 up to 300mm2. Voltage rating maximum 8.7/15(17.5)kV. Suitable for both straight and right angled applications.

3M™ Gland Kits & Seals

GlandPart

Number

ApplicationRange Diameter

Voltage Rating

36-65mm 11kV THG1

53-94mm 11kV THG2

To fit THG1 11kV HGS1

To fit THG2 11kV THGS2

Top hatgland kits

Top hatgland sealonly

3M™ Cold Shrink

Straight/Right Angle BootCold Aplied Barrier Boot System For Rated Voltages

25 – 120 mm2

150 – 300 mm2

50 – 300 mm2

Non-Removable

Removable

3

3

92 - GBN 610 - 392 - GBN 620 - 3

92 - EE 717 - 1

VOLTAGE

15kV

CABLE SIZEDESCRIPTIONNO. CORES 3M KIT

( For XLPE, Screened Armoured Cables )

15kV92-FG 410-392-FG 420-392-FG 430-3

70 – 120 mm2

150 – 240 mm2

300 – 400 mm2

3

*Customized solutions available for transition, size transition, PILC to PILC splicing kits

3M™ Cold Shrink Transition Splicing Kits( For Paper Insulated Belted Cable to XLPE Cable )

3M KITCABLE SIZEVOLTAGE NO. CORES


15kV92-OG400-392-OG410-392-OG420-3

50 – 95 mm2

95 – 185 mm2

240 – 300 mm2

3

3M™ Cold Shrink Paper Splicing Kits( For Paper Insulated Belted Cable to XLPE Cable )

15kV

36kV

92-OG400-392-OG410-392-OG420-3

92-OG400-392-OG410-3

70 – 120 mm2

150 – 240 mm2

300 – 400 mm2

50 – 95 mm2

120 – 300 mm2

3

3

3M™ Scotchcast™ Cold Shrink Splicing Kits( For Hydrocarbon Areas )


10 11

3M™ Cold Shrink

Kit Number Primary Insulation Jacket O.D. Range Conductor Size Range AWG (mm2)

7672-S-8 1.94”-3.08”(49.3-75.4 mm) 2.45” - 3.61”(62.2-91.7 mm) 250-2000(120-1000)

Note: The final determining factors governing product selection are Cable Insulation O.D. and Cable Jacket O.D. Range.

Termination Selection Guide

3M Cold Shrink High Voltage Joints & Terminations The same 3M cold shrink technology that the utility industry has relied on for years has been expanded to 69/72 kV.

3M™ Cold Shrink Termination 69/72,5kV3M Kit QT-III, 7672-S-8 Series, is designed to terminate power cable up to 69/72,5kV. It covers a conductor size of 250 to 2000 kcmil, 125-1000 mm(2). Unlike traditional kits, 3M cold shrink technology allows the installer to use same installation techniques as used for medium-voltage cold shrink accessories. For standard and reduced-wall cable.

Features• Once installed, cold shrink tube creates a dynamic, compressive environmental seal and electrical interface without sealants or adhesives.• Resists ultra-violet radiation, ozone and industry-approved cable cleaners.• Compact design for installation in restricted space,• Insulator, stress control tubes and compounds and sealing compound are compatible with common solid dielectric insulation

Applications• Designed to terminate 650-mil power cable up to 69kV.• Covers conductor size range of 250 to 2000 kcmil (125-1000 mm2). QT-III termination 7672-S-8 series is designed for outdoor or indoor installations and meets or exceeds the requirements of:• IEEE 48, Class 1, for 69kV• IEC 60849 for 72,5kV• Applications requiring 350kV BIL performance levels, • Solid dielectric insulation, such as PE, XLPE and EPR, • Tape-shielded or LC-shielded high-voltage cables.

3M Cold Shrink Joint 69/72,5kV

3M QSIII Cold Shrink Series Kits are designed for inline splicing up to 72.5kV Umax Voltage class, Single core polymeric power cable systems with copper wire screen according to IEC 60840 04/2004

The versatile design of the prefabricated one-piece cold shrink splice body allows installation on a wide range of cables sizes and types and a fast and easy installation at temperatures ranging from-20 C to +50 C.

• No heat, flame, or special tools are needed during splice body installation.

• Accommodates crimp or mechanical connectors up to 79mm diameter and 230mm length.

• Wide application range covering several cable cross sectional areas from 300mm²- 1000mm²

• Solderless earth connection by means of copper screen sleeve and constant force springs.

• Thick walled, EMPDM rubber Cold Shrink outer re-jacketing tubes provide physical protection and moisture sealing of the completed Inline Splices.

Diameter Diameter Cross section(mm²) Earth Screen Diameter Length Over Cable Over Primary 66/69 (72.5) kV Cross Section (mm²) Min-Max (mm) Max. (mm) Jacket(mm) Insulation

96-AC640-1(RW) 90 36.6-65.5 300-1000 50 49.5-79 230

96-AC 641-1(RW) 90 36.6-65.5 300-1000 150 49.5-79 230

Kit Ref Cable Dimensions for Polymeric Cables Connector Dimensions Crimp or Mechanical Connector

Application Range

3M™ Cold ShrinkHigh Voltage Joints & Terminations

12 13

Separable Connectors3M™

3M produce a range of silicone rubber Seperable elbow, straight and T connector kits. The assembly is fully screened and has an integrated stress control element. Each kit contains all the necessary components to install one Seperable Connector, including all connection devices.

Separable Connectors (plug-in)- Rated 6/10 (12kV)

Separable Elbow ConnectorsThe 93-EE 605-2 kits and the 93-EE 605-4 consist of an elbow type Separable Connector. The assembly is fully screened and has an integrated stress control element. Each kit contains all the necessary components to install one Separable Connector, including all connection devices.

ApplicationsThese kits are designed to be installed on wire screened nonarmoured polymeric insulated cables for 6/10kV (Um = 12kV) up to 12/20kV (Um = 24kV) – 400A / 630A applications. The Separable Connector establishes the connection between any polymeric insulated cable onto transformers, switchgears, motors or other equipment.

Diameter overPrimary Insulation

(mm)

93-EE 605-2/-95 25 - 95 17.2 - 25.0

93-EE 615-2/120 120 Available on request

93-EE 615-2/150 150 Available on request

Kit Ref Application Range CSA (mm2)

Elbow Connector 250A


(mm)

93-EE 605-4/-95 25 - 95 15.0 - 32.6

93-EE 605-4/-240 95 - 240 15.0 - 32.6



Separable Straight ConnectorsThe 92-EE 600-2 kits consist of a straight type Separable Connector. The assembly is fully screened and has an integrated stress control element. Each kit contains all the necessary components to install one Separable Connector, including all connection devices.

ApplicationsThe 92-EE 600-2 kits consist of a straight type Separable Connector. The assembly is fully screened and has an integrated stress control element. Each kit contains all the necessary components to install one Separable Connector, including all connection devices.


(mm)

93-EE 600-2/25 25 12.7 - 15.2

93-EE 600-2/35 35 13.8 - 16.3

93-EE 600-2/50 50 15.0 - 17.5

93-EE 600-2/70 70 16.7 - 19.2

93-EE 600-2/95 95 18.3 - 20.8

93-EE 600-2/120 120 19.8 - 22.8

93-EE 600-2/150 150 21.3 - 24.3


Straight Connector 250A

Separable T-ConnectorsThe 93-EE 7x5-6 kits consist of a T-type Separable Connector. The assembly is fully screened and has an integrated stress control element. Each kit contains all the necessary components to install one Plug-In, including all connection devices.

ApplicationsThese kits are designed to be installed on wire screened non-armoured polymeric insulated cables for 6/10kV (Um = 12kV) up to 12/20kV (Um = 24kV) – 400A / 630A applications. The Separable Connector establishes the connection between any polymeric insulated cable onto transformers, switchgears, motors or other equipment.


(mm)

93-EE 705-6/-95 50 - 95 15.0 - 32.6

93-EE 705-6/-240 95 - 240 15.0 - 32.6

93-EE 715-6/300 300 26.3 - 30.4

93-EE 715-6/400 400 30.2 - 34.6


T Connector 630A

3M™ Separable Connectors

14 15

3M™ Separable Connectors


Elbow ConnectorsThe 93-EE 605-2 kits and the 93-EE 605-4 consist of an elbow type Separable Connector. The assembly is fully screened and has an integrated stress control element. Each kit contains all the necessary components to install one Separable Connector, including all connection devices.

ApplicationsThese kits are designed to be installed on wire screened nonarmoured polymeric insulated cables for 6/10kv (Um = 12kV) up to 12/20kV (Um = 24kV) - 400 Applications. The Separable Connector establishes the connection between any polymeric insulated cable onto transformers, switchgears, motors or other equipment.


(mm)

93-EE 605-2/-95 25 - 95 17.2 - 25.0

93-EE 615-2/120 120 24.0 - 27.0

93-EE 615-2/150 150 25.5 - 28.5




(mm)

93-EE 605-4/-95 25 - 95 15.0 - 32.6

93-EE 605-4/-240 95 - 240 15.0 - 32.6




Elbow ConnectorsThe 94-EE 605-4 kits consist of an elbow type Separable Connector. The assembly is fully screened and has an integrated stress control element. Each kit contains all the necessary components to install one Separable Connector, including all connection devices.

ApplicationsThese kits are designed to be installed on wire screened nonarmoured polymeric insulated cables up to 18/30kV (Um = 36kV) - 400A applications. The Separable Connector establishes the connection between any polymeric insulated cable onto transformers, switchgears, motors or other equipment.


(mm)

94-EE 605-4/35 35 22.8 - 25.5

94-EE 605-4/50 50 23.5 - 26.7

94-EE 605-4/70 70 25.1 - 28.4

94-EE 605-4/95 95 26.7 - 30.0

94-EE 605-4/120 120 28.3 - 32.0

94-EE 605-4/150 150 29.9 - 33.5

94-EE 605-4/185 185 31.5 - 35.1

94-EE 605-4/240 240 33.4 - 37.6

94-EE 605-4/300 300 35.6 - 39.6



Straight ConnectorsThe 93-EE 600-2 kits consist of a straight type Separable Connector. The assembly is fully screened and has an integrated stress control element. Each kit contains all the necessary components to install one Separable Connector, including all connection devices.

ApplicationsThese kits are designed to be installed on wire screened non-armoured polymeric insulated cables up to 6/10kV (Um = 12kV) up to 12/20kV (Um = 24kV) – 400A / 630A applications. The Separable Connector establishes the connection between any polymeric insulated cable onto transformers, switchgears, motors or other equipment.


(mm)

93-EE 600-2/25 25 17.0 - 19.5

93-EE 600-2/35 35 18.0 - 20.5

93-EE 600-2/50 50 19.2 - 21.7

93-EE 600-2/70 70 20.9 - 23.4

93-EE 600-2/95 95 22.5 - 25.0

93-EE 600-2/120 120 24.0 - 27.0

93-EE 600-2/150 150 25.5 - 28.5


Straight Connector 250A

T-ConnectorsThe 94-EE 705-6/x kits consist of a T-type Separable Connector. The assembly is fully screened and has an integrated stress control element. Each kit contains all the necessary components to install one Plug-In, including all connection devices.

ApplicationsThese kits are designed to be installed on wire screened nonarmoured polymeric insulated cables for 18/30 (Um = 36kV) 400A/ 630A applications. The Separable Connector establishes the connection between any polymeric insulated cable onto transformers, switchgears, motors or other equipment.


(mm)

94-EE 705-6/70 70 25.1 - 28.4

94-EE 705-6/95 95 26.7 - 30.0

94-EE 705-6/120 120 28.3 - 32.0

94-EE 705-6/150 150 29.9 - 33.5

94-EE 705-6/185 185 31.5 - 35.1

94-EE 705-6/240 240 33.4 - 37.6

94-EE 705-6/300 300 35.6 - 39.6


T Connector 630A

T-ConnectorsThe 93-EE 705-6/x2 kits consist of a T-type Separable Connector. The assembly is fully screened and has an integrated stress control element. Each kit contains all the necessary components to install one Plug-In, including all connection devices.

ApplicationsThese kits are designed to be installed on wire screened non-armoured polymeric insulated cables up to 6/10kV (Um = 12kV) up to 12/20kV (Um = 24kV) – 400A / 630A applications. The Separable Connector establishes the connection between any polymeric insulated cable onto transformers, switchgears, motors or other equipment.


(mm)

93-EE 705-6/-95 50 - 95 15.0 - 32.6

93-EE 705-6/-240 95 - 240 15.0 - 32.6

93-EE 715-6/300 300 30.2 - 34.6

93-EE 715-6/400 400 33.5 - 37.8


T Connector 630A

Name 3M Type Description Usable forCoupling pieces KU 21 250A separable connectors 9x-EE 600-2/x

Coupling pieces KU 23.2 Silicone coupling pieces to connect T-plugs T- Plug 93-EE 705-6x

Coupling pieces KU 33 Silicone coupling pieces to connect T- plugs T-Plugs 300 and 400mm2

Earthing accessories ER 23 for plug in terminations disconnected from the switchgear T-Plugs

Test adapter PR 23.1 T-shaped test bushing T- Plugs

Post insulator STF 21 To connect XLPE-cables to bushings with a 250A bushing using conventional terminations 250A bushings interface type A

Surge-proof terminating caps SP 21 Terminating caps size A

Surge-proof terminating caps SP 33 Terminating caps size C

Surge arrester MUT 23 (12kV) Surge arrester Uc = 12kV T- Plug 93-EE 705-6x



Surge arrester MUT 33 (30 kV) Surge arrester Uc = 30kV 705-6x (KU33 needed)

Surge arrester MUT 33 (15 kV) Surge arrester Uc = 15kV 705-6x (KU33 needed)

T-Plug with metal housing 93-EM 705-6/-95 10 up to 20kV T-Plug 25-95mm2 Based on 93-EE 705-6/-95

T-Plug with metal housing 93-EM 705-6/-240 10 up to 20kV T-Plug 95-240mm2 Based on 93-EE 705-6/-240

Elbow with metal housing 93-EM 605-2/-95 10 up to 20kV Elbow 25-95mm2 Based on 93-EE 605-2/-95

Accessories for Separable Connectors

16 17

3M™Cold Shrink


3M Cold Shrink End Caps environmentally seal and mechanically protect exposed cable ends using no tools, mastics or tapes. They are close-ended, tubular rubber sleeves that are factory expanded and loaded onto a removable core. When positioned over the end of a cable, or other cylindrical object, the core is removed to provide a reliable seal that protects your cable ends from environmental damage. (I.e. moisture, contamination, corrosion, ozone, ultra-violet and radiation)..


Features• Simple & fast installation – no tools required• Wide range of cable sizes accommodated• Good abrasion resistance• Seals tight – retains resiliency & pressure after prolonged ageing & exposure• Water-resistant• No heat required• Resistant to acid, alkalis, fungus, ozone, UV• Easily removed

Applications• Cable protection from exposure to moisture

Product No. Use range (mm)

EC-1 11.6 - 20.9 EC-2 15.9 - 30.1 EC-3 26.0 - 49.2 EC-4 45.5 - 84.3

3M™ Cold Shrink Cable Abandonment KitsSuitable for Cable Types: XLPE/PVC Insulation, Lead Sheath, Steel Wire Armour, PVC Sheathed. Also suitable for Ship wiring Cables, Rubber/GSWB, and/or Unarmoured Cables Up to and including 1.9/3.3kV. Single and Multi-core Cables

A complete kit with all the components required to abandon cables either temporarily or permanently. Provides environmental seal and mechanical protection, eliminates the requirements for heat during installation using 3M Cold Shrink technology.

Each kit includes Cold Shrink End Cap, Cold Shrink Pre Stretched Tube, Armour continuity, tapes, and full instructions.

ACCEPTED KIT REFERENCE CABLEDIAMETER (mm)

12 -18 CSCAK/1

18 - 25 CSCAK/2

25 - 42 CSCAK/3

42 - 55 CSCAK/4

56 - 81 CSCAK/5

3M™ Cold Shrink End CapsThey are easily installed and cleanly removable, there are four different end caps available to accommodate a wide range of sizes.

18 19

Heat Shrink3M™

3M Heat Shrink products provide longterm reliable performance and excellent mechanical and environment protection. Easy to install, 3M Heat Shrink tubing comes ready to use and with the application of moderate heat automatically moulds to a skin tight fit – even over irregularly shaped objects.

The comprehensive 3M range includes, thin-walled, medium and thick walled tubing, adhesive lined tubing, and a range of moulded parts, featuring:• High temperature resistance• High strength and good mechanical properties• Excellent solvent and chemical resistance• Superior thermal and form stability• Shape memory• Precise shrink ratio and recovery• Superior split and crack resistance

3M™ Heat Shrink

3M™ Thin Wall Heat Shrink Tubing

Wide range of heat shrinks tubing to insulate electrical cables and wires:• For any environment where wires are joined, connected or terminated• Simple insulation to heavy duty projection• Phase and circuit identification and wire marking• Lightweight wire harness covering & wire bundling• Excellent chemical and solvent resistance• Skin tight even over irregular shaped objects• Speedy and easy to use• FP-301 polyolefin tubing has 2:1 shrink ratio.

Applicable Specification • MIL-DTL-23053/5• Class 1,2;• AMS – 3636 • AMS – 3637• UL File E-39100• E-69751• CSALR38227• ABS

--------- as supplied ------------------ recovered

3/64 .046 (1,17) .023 (0,58) .016 (0,41)

1/16 .063 (1,60) .031 (0,79) .017 (0,43)

3/32 .093 (2,36) .046 (1,17)) .020 (0,51)

1/8 .125 (3,18) .062 (1,57) .020 (0,51)

3/16 .187 (4,75) .093 (2,36) .020 (0,51)

1/4 .250 (6,35) .125 (3,18) .025 (0,64)

3/8 .375 (9,53) .187 (4,75) .025 (0,64)

1/2 .500 (12,70) .250 (6,35) .025 (0,64)

3/4 .750 (19,05) .375 (9,53) .030 (0,76)

1 1.000 (25,40) .500 (12,70) .035 (0,89)

1-1/2 1.500 (38,10) .750 (19,05) .040 (1,02)

2 2.000 (50,80) 1.000 (25,40) .045 (1,14)

3 3.000 (76,20) 1.500 (38,10) .050 (1,27)

4 4.000 (101,60) 2.000 (50,80) .055 (1,40)

Ordering Size Expanded ID Minimum Recovered ID Maximum Recovered Wall Thickness (Nominal)

Standard Sizes and Dimensions (3M™ FP-301 Tubing)

in. (mm) in. (mm) in. (mm)

20 21

3M™ Heat Shrink

Bore Supplied min/ Bore Recovery Max

12mm 3mm 19mm 6mm 27mm 8mm 32mm 7.5mm 38mm 12mm 50mm 18mm 70mm 26mm

90mm 36mm

120mm 40mm


1.5mm 0.5mm

3.0mm 1.0mm

9.0mm 3.0mm

18.0mm 6.0mm

39.0mm 12.7mm


51mm 25.4mm

76mm 38mm

102mm 51mm

Bore Supplied min / Bore Recovery Max

12mm 3mm 19mm 6mm 30mm 8mm 38mm 12mm 48mm 15mm 85mm 26mm 115mm 38mm

3M™ GTI 3000 - General PurposeThin Wall Insulation PolyolefinGTI 3000 is flexible, thin walled heat shrink tubing, made of cross-linked, halogen free polyolefin. The tubing meets the latest requirements regarding shrinking time, flexibility, and material characteristics.

GTI 3000 is designed to provide excellent insulation and protection in various industrial applications. The large diameter range, and 3:1 shrink ratio offers many solutions within a small range of products. GTI 3000 is available in a wide range of colours, with a shiny, smooth, particle free surface. Suitable for cable marking and identification applications. Continuous operating temperature -55°C to 135°C. Supplied in 1 metre pieces.

GTI 3000 fulfills the strict requirements of many standards, including RoHS. Available in the following colours: Black, White, Blue, Brown, Red, Clear, Yellow, Green/Yellow** Size 1.5 / 0.5 not available in Green / Yellow

3M™ GTI - General Purpose Thin Wall Insulation Polyolefin3M GTI is flexible thin walled polyolefin tubing, with fast shrink time and excellent electrical and mechanical properties.

GTI is designed to provide excellent insulation and protection in various industrial applications.

Continuous operating temperature -55°C to 135°C with a 2:1 Shrink Ratio. Supplied in 1 metre pieces. Available in the following colour & size combinations to complement the GTI-3000 Range; Black, White, Blue, Brown, Red, Clear, Yellow

3M™ MDT - A - Adhesive Lined Medium Duty PolyolefinMDT-A is specially designed medium wall tubing, which provides tough and flexible insulation and is ideal for the protection of cable joints and terminations. MDT-A is lined with a specially designed adhesive, which is applied during the tubing’s extrusion process. This achieves a very smooth adhesive layer, which ensures excellent sealing properties. MDT-A meets the requirements of VDE 0278 part 3.

A non-adhesive version is available (MDT), please contact customer service for detailsThe adhesive lining makes it especially suitable for underground cable joint applications. For Offshore and Naval applications, a modified MDT-A approved by Det Norske Veritas is available (MDT-A-F471).

Supplied in 1 metre pieces. Continuous operating temperature range: -35°C to 130°C, outdoor wall only.Available in black - Shrink ratio is up to 4.5: 1

3M™ HDT - A - Adhesive Lined Heavy Duty Polyolefin HDT-A is thick wall polyolefin tubing. The toughness and weather ability of the tubing make it well suited for exposed applications. HDT-A is supplied with a specially designed hot melt adhesive layer. The adhesive is applied during extrusion of the tubing thus achieving a very smooth, constant adhesive layer, which ensures excellent sealing properties. Shrink ratio: Up to 4 : 1

HDT-A meets the longitudi nal sealing requirements of VDE 0278 part 3 and is, therefore, ideal for sealing underground or exposed inline joints and terminations.

Supplied in 1 metre pieces. Continuous operating temperature range: -55°C to 130°C, outer wall only. Available in black.

(Cross sectionin mm2)

(Cross sectionin mm2)

Shielded/Armoured

Cable

NonShielded

Cable

5 x 1.5 to 5 x 6 91 –AH-20-5S - -

5 x 6 to 5 x 16 91-AH-21-5S - - 4 x 6 to 4 x 25* 91-AH-21-S* 91-AHA-21-S 4 x 6 to 4 x 16

4 x 35 to 4 x 50 91-AH-22-S* 91-AHA-22-S 4 x 25 to 4 x 35

4 x 70 to 4 x 95* 91-AH-23-S* 91-AHA-23-S 4 x 50 to 4 x 70

4 x 95 to 4 x 150 91-AH-24-S 91-AHA-24-S 4 x 95 to 4 x 150

4 x 185 to 4 x 300* 91-AH-25-S* 91-AHA-25-S 4 x 185 to 4 x 240

*The majority of cable cross-sections can be covered with these 3 kits

Low Voltage (up to 1kV)91-AH (A) Series for Crimp ConnectorsApplication91-AH (A) Series has been developed to offer an easy method for jointing low voltage polymeric insulated cables thus ensuring a moisture sealed connection. The kit consists of the appropriate inner tubes, other tubes and a user-friendly installation drawing. Kits suitable for shielded and armoured cables also include constant force springs and a copper sleeve for armour continuity. Kits are designed for a wide range of cable cross-sections optimizing stock holding. The 91-AH(A) Series can be used with all common crimp connectors and also for splicing with phase crossing.

Technical FeaturesThe 91-AH(A) Kits are made from cross linked polyolefin tubing, which is internally coated with hot melt adhesive. As the adhesive melts and the sleeve shrinks, a perfect waterlight seal is formed. Each kit contains all the necessary tubings and an appropriate instruction sheet outlining the different steps of jointing installation. The outer sleeve is manufactured from heavy duty, thick wall, flame retardant tubing.

• Quick and easy installation• Kits designed to accommodate a wide range of cross sections up to 300mm2• Excellent moisture sealing• Flame retardant tubing• Kits available for both 4 and 5 core cables• Kits also available for shielded and armoured cables

22 23

3M™ Heavy Duty Wraparound HDCWThe HDCW Wraparound Heat Shrink Cable Repair Sleeve is designed to repair damaged cable sheaths. It is also suitable for use with cable joints and as additional corrosion protection on undamaged cables.

HDCW is made from modified cross-linked polyolefin with a hot-melt adhesive coated to the inner side of the sleeve. Upon heating, the sleeve shrinks and the adhesive melts, thereby achieving a safe and watertight bond between the sleeve and the cable. A corrosion proof metal clip is used to fully close the sleeve.

• Quick and easy to use• Maximum protection against mechanical stress• Good bonding to PE and PVC surfaces• Excellent resistance to even the harshest environments • Forms a perfect seal to prevent moisture ingress

Minimum Recovered

WallThickness

(mm)

CableDiameterMax/Min

(mm)

35 / 10

55 / 15

80 / 25

110 / 30

140 / 40

Expanded Inner

Diameter (mm)

50

75

100

132

145

RecoveredInner

Diameter (mm)

8

13

23

25

32

Length (mm)

250

500

750

1000

1200

250

500

750

1000

1200

250

500

750

1000

1200

250

500

750

1000

1200

250

500

750

1000

1200

2.0

2.0

2.0

2.0

1.8

HDCW 35/10-250

HDCW 35/10-500

HDCW 35/10-750

HDCW 35/10-1000

HDCW 35/10-1200

HDCW 55/15-250

HDCW 55/15-500

HDCW 55/15-750

HDCW 55/15-1000

HDCW 55/15-1200

HDCW 80/25-250

HDCW 80/25-500

HDCW 80/25-750

HDCW 80/25-1000

HDCW 80/15-1200

HDCW 110/30-250

HDCW 110/30-500

HDCW 110/30-750

HDCW 110/30-1000

HDCW 110/30-1200

HDCW 140/40-250

HDCW 140/40-500

HDCW 140/40-750

HDCW 140/40-1000

HDCW 140/40-1200

Part Number

Heat Shrink - Moulded Parts

3M™ Break Outs3M Heat Shrink Moulded Parts offer excellent electrical and mechanical protection and are resistant to a range of corrosive fuels, fluids and chemicals. By ordering a combination of tubing and breakouts you can customize your termination on site to suit all cable diameters, conductor tail lengths etc.

3M™ SKE 2F / 2 Way Outlet Sleeve Breakout

ExpandedDiameter

(as supplied)

RecoveredDiameter

RecoveredDimensions

(fully shrunk)

ConductorSize

Range

H(Min)mm

30.0

K(Min)mm

15.0

H(Max)mm

9.4

K(Max)mm

4.1

S(Nom)mm

20.0

P±

10%mm

94.0

R±

10%mm

30.0

HW±

20%mm

1.5

W±

20%mm

1.2

(Mm2)

4-35SKE - 2F/1

3M™ SKE 3F / 3 Way Outlet Sleeve Breakouts

ExpandedDiameter

(as supplied)

RecoveredDiameter

RecoveredDimensions

(fully shrunk)

ConductorSize

Range

H(Min)mm

25.031.055.872.0

K(Min)mm

9.015.030.437.0

H(Max)mm

9.018.022.535.0

K(Max)mm

3.05.09.017.5

S(Nom)mm

16.023.037.055.0

P±

10%mm

68.089.0180.0178.0

R±

10%mm

18.024.044.038.0

HW±

20%mm

2.52.52.04.0

W±

20%mm

2.02.32.03.0

(Mm2)

4-1616-35

50-150185-300

SKE-3F/1=1.5SKE-3F/2SKE-3F/4SKE-3F/5

Part No.

3M™ SKE 4F / 5

ExpandedDiameter

(as supplied)

RecoveredDimensions

(fully shrunk)

ConductorSize

Range

H(Min)mm

78.7

H(Max)mm

35.6

K(Min)mm

38.1

K(Area Max)

mm

129.0

S(Nom)mm

76.2

S(Nom)mm

50.8

P±

10%mm

205.0

R±

10%mm

38.1

HW±

20%mm

3.8

W±

20%mm

3.3

(Mm2)

120-300SKE-4F/5

Part No.

3M™ SKE 4F / 4 Way Outlet Sleeve Breakouts

ExpandedDiameter

(as supplied)

RecoveredDiameter

RecoveredDimensions

(fully shrunk)

ConductorSize

Range

H(Min)mm

35.047.4

K(Min)mm

15.021.5

H(Max)mm

12.022.9

K(Max)mm

3.06.4

S(Nom)mm

22.038.1

P±

10%mm

95.0202.0

R±

10%mm

24.038.1

HW±

20%mm

2.54.1

W±

20%mm

2.03.3

(Mm2)

4-3535-95

SKE-4F/1+2SKE-4F/3+4

Part No.

3M™ Heat Shrink

24 25

A Safe, Clean, Simple & Reliable Joint Solution• High quality range of resins for low and medium voltage applications• Unique Patented Close Mixing and Pouring (CMP) system• Transparent Moud for better control of the job• Resin packed in transparent 2-chamber mixing bags• Approvals according to VDE 0291 part 2

Resin Joint KitsScotchcast™3M™

3M™ resin insulated splicing kits are designed for indoor, outdoor (weather exposed), direct buried or submersed applications. 3M brand Scotchcast™ Resins are 100% solids, electrical grade, hydrolytically stable insulating resins. Their unique electrical and physical properties make them ideal for insulating and protecting electrical/electronic pars and assemblies. Their physical features also make them suitable for non-electrical, general use applications, for example as adhesives or sealants.

3M™ Scotchcast™ Resin Joints offer a high degree of mechanical strength for physical protection of connections and moisture-resistant insulation in above ground or direct burial applications.

3M™ Scotchcast Resin

Features• Utilizes a “bulge“ type mould• Features Scotchcast™ 460M polyurethane resin • Meets VDE 0278, BS 6910

Benefits• 90A series are ideal for armoured cables • Tough and moisture-proof• Long lasting physical and electrical protection• All kits include tape for insulating ferrules and sealing mould ends• Tried and tested for over 30 years• 3M worldwide quality guarantee

Product Min. Cable O.D. Max. Cable O.D. Max. Cross Section Range (mm²)

Non-Armoured Cable Armoured Cable

Scotchcast™ 90A-01 8 mm 28 mm 3 x 16 4 x 16 3 x 10 4 x 10




Scotchcast™ 90A-05 30 mm 55 mm



Selection Chart

26 27

3M™ Scotchcast Resin

*closed mix and pour system

3M REF SIZERESIN TYPE DESCRIPTION

Resin Systems Selection Chart

No. 2123

No. 2130

Polyurethane

Polyurethane

Size C - 12.3 oz

Size D - 21.2 oz

Size B - 216 g

Size C - 616 g

Re-entrable compound,

Low viscosityflows well at low temperatures,

Excellent wetting properties

Flexible resin used in areas where the mould is

removed i.e for flexible splicing

New 3M Series

New 3M Series

New 3M REF Old Series

Application Range

Core Main Min Main MaxBranch

MinBranch Max

Old Series

Old Series

Nozzle Product Descrption

Bag Size in ml

Low Voltage Range

28 29

92-NBA092-NBA192-NBA292-NBA392-NBA492-NBA592-NBA692-NBA7

92-NBC192-NBC192-NBC292-NBC2

92-NBB1-U92-NBB2-U

92-NBB192-NBB192-NBB192-NBB292-NBB192-NBB2

92-AB 11192-AB 11292-AB 11392-AB 11492-AB 11592-AB 11692-AB 117

92-NBA092-NBA092-NBA192-NBA192-NBA4

No. 40*

No. 1402*

4 X4 X4 X4 X4 X4 X4 X4 X

4 X / 5 X4 X / 5 X4 X / 5 X4 X / 5 X

4 X / 5 X4 X / 5 X

4 X / 5 X4 X / 5 X4 X / 5 X4 X / 5 X4 X / 5 X4 X / 5 X

4 X4 X4 X4 X4 X4 X4 X

2,5/1,52,5/1,54/44/4

2,5/1,54/4

2,5/1,52,5/1,52,5/1,54/42,5/1,54/4

1.56163595120150

16/1016/1035/2535/25

16/1035/25

16/1016/1016/1035/2516/1035/25

6102570150185240

2,5/1,52,5/1,52,5/42,5/4

2,5/1,52,5/4

2,5/1,52,5/1,52,5/1,52,5/42,5/1,52,5/4

1.5410357095150

16/1016/1025/2525/25

16/1025/25

16/1016/1016/1025/2516/1025/25

4101650120150240

92 A Series

92 AU Series(Hazardous areas e.g. petrochemical sites)

91-C Series

No. 4

No. 1471

No. 47

No. 1400 U

92-BU Series

92-B Series

91-AB Series

BRANCH KITS

BRANCH / DOUBLE BRANCH / INLINE JOINTS

INLINE KITS

82 A Series

4 X4 X4 X4 X4 X

1.51.5616255070120

1.51.51.51.525

41016255095150240

44101050

Yes

Yes

Yes

No

No

No

Yes

Yes

1x 901x 1351x 2001x 3701x 6801x 13752x 13753x 2200

1x 901x 901x 1351x 1351x 680

Size C 426G (370ml)

Size B 230G (200ml)

Size A 100G ( 90ml)

Bulk Size B 230G (200ml)

Bulk Size C 426G (370ml)

Bulk Size C 426G (370ml)

FR W Size C 426G (370ml)

FR W Size B 230G (200ml)

The new body design is based on a completely new hinged, one-part joint body that allows resin to be sealed inside the mould without the use of mastic and tape - it does this by using an expanding foam seal.

The new Scotchcast resin, fully compliant with EU legislation, has hydrophobic property which makes it perfect for a use in presence of water and proposed in bag with a pouring nozzle, which represents, one step less in the preparation process.

92-NBA0-U92-NBA1-U92-NBA2-U92-NBA3-U92-NBA4-U92-NBA5-U92-NBA6-U92-NBA7-U

4 X4 X4 X4 X4 X4 X4 X4 X

1.51.5616255070120

41016255095150240

1x 901x 1351x 2001x 3701x 6801x 13752x 13753x 2200

Get your hands on 3M Tape!

3M now offers new and experienced electricians a chance to sharpen their skills with the complete 3M tape training kit (80-6114-2896-4). The kit contains all the tools needed for the following applications:

• Insulating & wrapping a split bolt• Insulating & wrapping a motor lead connection• Insulating & wrapping an inline splice• Insulating & wrapping a bus bar

with Quality TapesInsulate & Protect

Vinyl Electrical Tapes Product Description/Applications

TapeThickness

TempRange

Roll Size

Rubber Electrical Tapes Product Description/Applications

TapeThickness

TempRange

Roll Size

Scotch® Super 33+™ Professional Grade Vinyl Electrical Tape*

Scotch® Heavy Duty Grade Vinyl Electrical Tape Super 88*

Scotch® Professional Grade Color Coding Vinyl Electrical Tape 35*

Scotch® Extra Heavy Duty Grade Vinyl Electrical Tape 22*

3M™ Highland™ Medium Grade Vinyl Electrical Tape*

3M™ Temflex™ Economy Grade Vinyl Electrical Tape 1700

3M™ Temflex™ Mining Grade Vinyl Electrical Tape 1700P

3M™ Economical General Purpose PVC

Scotch® Professional Grade Linerless Rubber Splicing Tape 130C*

Scotch® Professional Grade Linered Rubber Splicing Tape 23

Scotch® Medium Grade Linerless Rubber Splicing Compound 2242*

Insulates splices up to 600V. Repairs cable jacketing. Resists UV rays, abrasion, corrosion, alkalies and acids. Flame retardant. UL Listed and CSA Certified.

Thick, heavy duty vinyl protects cable and provides faster build-up. Insulates splices up to 600V. Repairs cable jacketing. Resists UV rays, abrasion, corrosion, alkalies and acids. Flame retardant. UL Listed and CSA Certified.

9 fade-resistant colors identify and mark phases/cables. Insulate splices up to 600V. Repair cable jacketing. Resists UV rays, abrasion, corrosion, alkalies and acids. Flame retardant. UL Listed and CSA Certified.

Extra-thick, heavy duty vinyl protects cable and provides faster build-up. Insulates splices up to 600V. Repairs cable jacketing. Resists UV rays, abrasion, corrosion, alkalies and acids. Flame retardant. UL Listed and CSA Certified.

Bundles cable and pull wire. Insulate splices up to 600V. Flame retardant. UL Listed and CSA Certified.

Bundle cable, wire pull and repair cable jacketing. Flame retardant. UL Listed and CSA certified.

Insulate & repair mining cable jacketing. Flame retardant. Printed for use in MSHA - approved splicing kits.

Tape, available in Black, Red, Blue, Brown, Yellow, White, Green, Orange, Grey for colour coding on wires and cables 0.15mm thickness Elongation 125%

Insulate and splice solid dielectric cables through 69kV. Linerless, high-voltage insulating, thermally conductive, self-bonding rubber.

Insulate and splice solid dielectric cables through 69kV. Linered, insulating, thermally conductive, self-bonding rubber.

Splice and insulate cables and connections. General purpose, linerless rubber insulating tape.

3/4” x 66’ (19 mm x 20,1 m) 3/4” x 44’ (19 mm x 13,4 m) 3/4” x 20’ (19 mm x 6,0 m)3/4” x 36 yd (19 mm x 32,9 m)1” x 36 yd (25,4 mm x 32,9 m)1-1/2” x 36 yd (38 mm x 32,9 m)

3/4’’ x 66’ (19 mm x 20,1 m) 3/4’’ x 44’ (19 mm x 13,4 m)3/4” x 36 yd (19 mm x 32,9 m)1” x 36 yd (25,4 mm x 32,9 m)1-1/2” x 36 yd (38 mm x 32,9 m)1-1/2” x 44’ (38 mm x 13,4 m)2” x 36 yd (51 mm x 32,9 m)

3/4’’ x 60’ (19 mm x 18,2 m) 1/2’’ x 20’ (12 mm x 6,1 m)3/4” x 66’ (19 mm x 20,1 m) 1/2” x 20’ (12 mm x 6,1 m)

1/2” x 36 yd (13 mm x32,9 m) 3/4” x 36 yd (19 mm x 32,9 m) 1” x 36 yd (25,4 mm x 32,9 m) 1-1/2” x 36 yd (38 mm x 32,9 m) 2” x 36 yd (51 mm x 32,9 m)

3/4” x 60’ (19 mm x 20,1 m)3/4” x 66’ (19 mm x 20,1 m)

3/4” x 60’ (19 mm x 18,2 m)3/4” x 36 yd (19 mm x 32,9 m)3/4” x 66’ (19 mm x 20,1 m)1” x 66’ (25,5 mm x 20,1 m)

3/4” x 66’ (19 mm x 20,1 m) 1-1/2” x 44’ (38 mm x 13,4 m) 1-1/2” x 66’ (38 mm x 20,1 m)3/4” x 66’ (19 mm x 20,1 m) 1-1/2” x 44’ (38 mm x 13,4 m)1-1/2” x 66’ (38 mm x 20,1 m)

3/4” x 8 YDS (14mmx 7.31m) 3/4” x YDS (19mmx9.14m) 3/4” x 20 YDS (19mmx6,0m) 3/4” x 66 YDS (19mmx20.1m)

1” x 30’ (25 mm x 9,1 m) 3/4” x 30’ (19 mm x 9,1 m) 1-1/2” x 30’ (38 mm x 9,1 m) 2” x 30’ (50 mm x 9,1 m)1” x 10’ (25 mm x 3,05 m)1” x 15’ (25 mm x 4,6 m)

3/4” x 30’ (19 mm x 9,1 m) 1” x 20’ (19 mm x 25 m) 1” x 30’ (25 mm x 9,1 m)1-1/2” x 30’ (38 mm x 9,1 m) 2” x 30’ (50 mm x 9,1 m)

3/4” x 15’ (19 mm x 4,57 m)1-1/2” x 15’ (38 mm x 4,57 m) 2” x 15’ ( 51 mm x 4,6 m)

7 mil

8.5 mil

7 mil

10 mil

7 mil

7 mil

7 mil

5 mil

30 mil

30 mil

30 mil

105°C 221°F

105°C221°F

105°C221°F

80°C176°Fl

90°C194°F

80°C176°F

80°C176°F

80°C

continuous: 90°C / 194°F short-term:

130°C / 266°F

continuous:90°C /194°F short term:

130°C / 266°F

continuous: 90°C / 194°Fshort-term:

130°C / 266°F

Electrical Tapes

30 31

Rubber Electrical Tapes Product Description/Applications

TapeThickness

TempRange

Roll Size

Mastics Product Description/Applications

TapeThickness

TempRange

Roll Size

CorrosionProtection Tapes

Product Description/Applications

TapeThickness

TempRange

Roll Size

3M™ Temflex™ Linered Rubber Splicing Tape 2150

Scotch® Professional Grade Semi-Conducting Tape 13

Scotch® Professional Grade Silicone Rubber Tape 70

Scotch® Professional Grade Heavy Duty Triangular Silicone Rubber Tape 70HDT

Scotch® Professional Grade Shielding Tape 24

Scotch® Professional Grade Grounding Tape 25

Scotch-Seal™ Professional Grade Mastic Sealing Tape 2229*

Scotch® Professional Grade Rubber Mastic Sealing Tape 2228*

3M Scotchfil® Electrical Insulation Putty

Scotch® Professional Grade Vinyl Mastic Sealing Tapes 2200, 2210, 06147, and 06149*

3M™ Scotchrap™ Professional Grade Corrosion Protection Tapes 50 and 51*

3M™ Scotchrap™ Professional Grade Pipe Primer

Economical, low-voltage, linered rubber insulating tape. Up to 600 volts.

Rubber tape, semi-conductive. Compatible with cable semi-conducting jackets. Electrically ground high-voltage connections. Provides cable shield continuation.

Protects and overwraps high-voltage cable terminations and serves as base layer to provide clean reentry into connections. Arc and track resistant. Self-fusing, long-lasting, silicone rubber.

Protects and overwraps high-voltage cable terminations, and serves as base layer to provide clean reentry into connections. Arc and track resistant. Self-fusing, long-lasting, thick silicone rubber, with a triangular tapered edge profile and a blue guideline for half-lapping.

All-metal open-weave shielding braid, conformable, temperature stable. Continue electrostatic shielding across splice.

All-metal woven braid; high current- carrying capacity of 6AWG wire. Solderable. Conformable ground braid for splices and terminations.

Provides excellent environmental and moisture seal. Conformable and durable mastic for sealing high-voltage cables and accessories. Overwrap with vinyl.

Provides excellent environmental and moisture seal. Extra-conformable and durable rubber-backed mastic for sealing high-voltage cables and accessories. “Built-in” rubber backing for added conformability. Overwrap with vinyl.

Black, self-fusing, insulating putty in tape form.

Provides excellent environmental and moisture seal. Conformable and durable mastic for sealing high-voltage cables and accessories. “Built-in” vinyl backing for fast application and abrasion resistance.

Protect pipe, conduits and fittings from corrosion. All-weather performance and corrosion resistance. Abrasion and impact-resistant.

Quick-dry, non-sag rubber base primer that prepares metal surfaces for tape application. For use with Scotchrap Tapes 50 & 51, Temflex Tapes 1100 & 1200.

3/4” x 22’ (19 mm x 6,7 m) 1-1/2” x 22’ (38 mm x 6,7 m)

3/4” x 15’ (19 mm x 4,5 m) 1-1/2 x 66’ (38 mm x 20,1 m)

1” x 30’ (25 mm x 9,14 m)

1” x 30’ (25 mm x 9,14 m)

1” x 15’ (25 mm x 4,5 m) 1” x 100’ (25 mm x 30,4 m)

1/2” x 15’ (12 mm x 4,57 m)

3-3/4” x 10’ (95 mm x 3,0 m)1” x 10’ (25 mm x 3,05 m)

2” x 3’ (50 mm x 0,9 m) 1” x 10’ (25 mm x 3,0 m)2” x 10’ (51 mm x 3,05 m)

1-1/2” x 60” (38 mm x 1,53 m)

6-1/2” x 4-1/2” (165 mm x 144 m) pads3-1/4” x 4-1/2” (82 mm x 144 m) pads4” x 10’ (101 mm x 3,04 m)2-1/2” x 10’ (63 mm x 3,04 m)2-1/2” x 2-1/2” (63 mm x 63 m) pads

1” x 100’ (25 mm x 30,5 m) 2” x 100’ (51 mm x 30,5 m) 3” x 100’ (76 mm x 30,5 m) 4” x 100’ (102 mm x 30,5 m) 6” x 100’ (152 mm x 30,5 m)

1 gallon can (3,79 liters)

30 mil

30 mil

12 mil

20 mil center, 8 mil edge

—

—

125 mil

65 mil

125 mil

2200 is 125 mil2210 is 90 mil6147 is 45 mil6149 is 45 mil

50 is 10 mil 51 is 20 mil

N/A

80°C176°F

continuous: 90°C /194°F short term: 130°C / 266°F

180°C 356°F

180°C356°F

—

—

80°C 176°F

90°C / 194°F emergency overload of 130°C / 266°F

80°C176°F

80°C 176°F

176°F80°C

80°C176°F

CorrosionProtection Tapes


TapeThickness

TempRange

Roll Size

SpecialUse Tapes


TapeThickness

TempRange

Roll Size

3M™ Temflex™ Economy Grade Corrosion Tape 1100 and 1100P

3M™ Temflex™ Economy Grade Corrosion Tape 1200 and 1200P

Scotch® Thread Sealant and Lubricant Tape 48*

Scotch® Glass Cloth Tape 27 and 69*

Scotch® Barricade Tape 300

3M™ Duct Tape 6969



3M™ Outdoor Masking and Stucco Tape 5959*

3M™ Value Duct Tape 1900

3M™ Performance Plus Duct Tape 8979

3M™ Temflex™ Cotton Friction Tape 1755

General purpose corrosion tape.

General purpose corrosion tape.

Pipe thread sealant that provides a leakproof seal. Leakproof seal helps prevent cross threading on pipe threads.

Woven insulating glass cloth; high temperature resistance. High mechanical strength. Heat stable insulation for furnace and oven controls, motor leads & switches.

Durable polyethylene plastic, bold 2” letters, long roll length, will not tear easily, attracts attention. Barricade applicable in both large and small areas.

Extra heavy duty duct tape, excellent adhesion, tears easily. Moisture proofing plumbing, duct sealing and protecting.

Heavy duty duct tape, excellent adhesion, strong backing. Sealing heating ventilation and air conditioning ducts.

Utility grade, comformable cloth duct tape

Construction, marine and maintenance, 90 day UV resistant waterproof backing

Light duty sealing and holding for non-critical uses, water resistant

High performance tape that removes cleanly up to six months after exposure to sunlight and temperature extremes. Aggressive adhesive and high tensile strength for demanding applications

Provides extra abrasion resistance for splices and connections.

2” x 100’ (51 mm x 30, 5 m)

2” x 100’ (51 mm x 30, 5 m)

1/4” x 260” (6,3 mm x 7 m) 1/2” x 260” (13 mm x 7 m) 1/2” x 520” (13 mm x 13 m) 1/2” x 1296” (13 mm x 33 m)

1/2” x 66’ (12 mm x 20,1 m) 3/4” x 66’ (19 mm x 20,1 m)3/4” x 60 yd (19 mm x 54,8 m)1” x 60 yd (25 mm x 54,8 m)1-1/2” x 60 yd (38 mm x 54,8 m)1/2” x 36 yd (13 mm x 33 m)3/4” x 36 yd ( 19 mm x 33 m)1” x 36 yd ( 25 mm x 33 m)

3” x 300’ 3” x 1000’

1-7/8” x 60 yd (48 mm x 54,8 m) 2-13/16” x 60 yd (72 mm x 54,8 m)

1” x 60 yd (24 mm x 54, 8 m) 1-7/8” x 60 yd (48 mm x 54.8 m) 2-13/16” x 60 yd (72 mm x 54,8 m) 3-3/4” x 60 yd (96 mm x 54,8 m)

1-7/8” x 50 yd (48 mm x 45.7 m)2-13/16” x 50 yd (72 mm x 45.7 m)

1-7/8” x 45 yd (48 mm x 41.1 m)

1-7/8” x 50 yd (48 mm x 45.7 m)2-13/16” x 50 yd (72 mm x 45.7 m)

1” x 60 yd. (24 mm x 54, 8 m)2” x 60 yd. (51 mm x 54,8 m)

3/4” x 60’ (19 mm x 18,28 m) 3/4” x 82-1/2’ (19 mm x 25 m)1-1/2” x 82-1/2’ (38 mm x 25 m)

10 mil

20 mil

3 mil

27 is 7 mil 69 is 7.5 mil

3 mil

10.7 mil

9 mil

6 mil

12 mil

5.8 mil

12.6 mil

15 mil

80°C176°F

80°C176°F

260°C500°F

27 is Class B temp (130°C / 266°F)

69 is class H temp (180°C / 356°F)

N/A

93°C200°F

65°C150°F

93°C 200°F

93°C 200°F

93°C 200°F

93°C200°F

80°C 176°F

Electrical Tapes

32 33

PROTECTIVE SPRAySScotch® 1600 (400ml)Scotch® 1600 provides highly effective anti-corrosion protection. Its rubber-asphalt base forms a dense, abrasion resistant covering that protects against moisture, spray salt water, all corrosive media and is resistant to the effects of physical impacts.

Scotch® 1617 Zinc Spray (400ml)Scotch® 1617 is an ideal cold galvanizer, that provides permanent protection against rust and corrosion by electrochemically bonding with the metal surface it is sprayed onto. Scotch® 1617 has excellent adhesion to iron and steel, is resistant to weathering, UV radiation, moisture, heat up to 500oC, alkaline solutions and mineral oils. It is an ideal primer for metal constructions, and complies with DIN 50976 (zinc content) and DIN 53167 (corrosion protection).

InSuLATInG SPRAyS Scotch® 1601 Clear Insulation Spray (400ml) Scotch® 1601 is a clear insulating and covering paint based on alkyd resin. It “hardens” into a flexible and resistant film, with excellent adhesion to most common surfaces such as metal, glass, plastic, wood, etc. Scotch® 1601 is resistant to UV-rays, acids, oil and alkalis, it is moisture and weatherproof and is especially characterized by its high dielectric strength.

Scotch® 1602 Coloured Insulation Spray – Red (400ml)As Scotch® 1601 but with the addition of colouring pigments for coloured protection, insulation or marking.

PREVEnTATIVE MAInTEnAnCE SPRAySScotch® 1605 Dehumidifier (400ml)Scotch® 1605 penetrates and displaces moisture. It also defrosts frozen sections. Scotch® 1605 then forms a thin protective film and thus prevents the renewed ingress of moisture. It is completely neutral toward paints, plastic, rubber and fabrics. It is effective over a wide temperature range from –74oC to + 175oC.

Scotch® 1609 Silicone Spray (400ml)Scotch® 1609 is a general use product for preventative maintenance, protection and lubrication. It lubricates moving parts, without becoming resinous and can be used over a wide temperature range (-32 oC to +177 oC) thereby, providing a long lasting protection against moisture and corrosion. Scotch® 1609 is neutral towards paints, plastic, rubber foamed materials, wood and fabrics.

CLEAnInG SPRAySScotch® 1625 Special Contact Cleaner (400ml)Scotch® 1625 loosens dirt, light oxide layers and impurities of every kind in an effective gentle manner. Scotch® 1625 is electrically neutral and totally residue-free, making it ideal for use in almost any environment as a spray cleaner.

Scotch® 1626 Cleaning Spray (400ml)Scotch® 1626 is an ideal dissolving cleaner for greases, oils, lubricants, resins and tar. It is residue free, non-corroding and washes away asbestos. Scotch® 1626 may corrode plastics.

Scotch® 1633 Rust Remover (400ml)Scotch® 1633 is a multi-purpose spray. It loosens rust, protects against moisture and renewed oxidation, can be used ideally as a lubricant, easily releases tightly sealed bolts, and has a high penetration capacity.

Aerosols, Sprays & Coatings

The Scotch® Spray product range consists of a number of different insulating, cleaning, protective and preventative maintenance sprays. These products should form a major part of any maintenance programme, from preventative action to repairing damage in all electrical and electronic environments. By safeguarding the quality and function of technical equipment and accessories, service life can be considerably increased.

Scotch Aerosols,3M™

Sprays & Coatings

34 35

Scotchflex Cable Ties

Scotchflex3M™Cable Ties

Technical Data

Material

Flame retardation material

Temperature range

Halogen free

Material information

Nylon 66 UV approved

UL 94V-2

from - 40ºC to 85ºC

Yes

RoHS compliance

3M™ Scotchflex™ neutral Cable Ties

Ref. Size Colour

Cable-ties (natural) nylon 6/6 for indoor application

Ref. Size Colour

Cable-ties (Black) nylon for indoor application

3M™ Scotchflex™ uV Cable Ties

FS 100 A-C 100 mm x 2.5 mm NEUTRAL FS 140 A-C 140 mm x 2.5 mm NEUTRAL FS 140 B-C 140 mm x 3.6 mm NEUTRAL FS 160 A-C 160 mm x 2.5 mm NEUTRAL FS 160 C-C 160 mm x 4.8 mm NEUTRAL FS 200 A-C 200 mm x 2.5 mm NEUTRAL FS 200 B-C 200 mm x 3.6 mm NEUTRAL FS 200 C-C 200 mm x 4.8 mm NEUTRAL

FS 200 D-C 200 mm x 7.6 mm NEUTRAL FS 280 C-C 280 mm x 4.8 mm NEUTRAL FS 280 D-C 280 mm x 7.6 mm NEUTRAL FS 300 B-C 300 mm x 3.6 mm NEUTRAL FS 370 C-C 370 mm x 4.8 mm NEUTRAL FS 370 D-C 368 mm x 7.6 mm NEUTRAL FS 390 C-C 390 mm x 4.8 mm NEUTRAL FS 530 D-C 530 mm x 7.6 mm NEUTRAL

FS 100 AW-C 100 mm x 2.5 mm WEATHER FS 140 AW-C 140 mm x 2.5 mm WEATHER FS 140 BW-C 140 mm x 3.6 mm WEATHER FS 160 AW-C 160 mm x 2.5 mm WEATHER FS 160 CW-C 160 mm x 4.8 mm WEATHER FS 200 AW-C 200 mm x 2.5 mm WEATHER FS 200 BW-C 200 mm x 3.6 mm WEATHER FS 200 CW-C 200 mm x 4.8 mm WEATHER FS 200 DW-C 200 mm x 7.6 mm WEATHER FS 280 CW-C 280 mm x 4.8 mm WEATHER FS 280 DW-C 280 mm x 7.6 mm WEATHER FS 300 BW-C 300 mm x 3.6 mm WEATHER FS 370 CW-C 370 mm x 4.8 mm WEATHER FS 370 DW-C 368 mm x 7.6 mm WEATHER FS 390 CW-C 390 mm x 4.8 mm WEATHER FS 530 DW-C 530 mm x 7.6 mm WEATHER FS 780 DW-C 776 mm x 9.0 mm WEATHER

3M™ Cable Ties are molded from 6/6 Nylon and are available in a variety of sizes including weather resistant black for outdoor use. Products with the UR symbol section meet UL Standard 1565 for Wire Positioning Devices. UL File #E116841.

3M™ Cable Ties are used to secure wire bundles and harness components quickly. The flexible design allows the user to slip ties easily under and around cables and harnesses. The bend of the tail makes it easier to grasp position and insert into the head. 3M Cable Ties can be used with most standard tensioning/cutoff tools for fast production line fastening.

36 37

3M™ Wire Pulling Lubricants Wax3MTM Wire Pulling Lubricant Wax can be used and stored in temperatures as high 194 oF (90 oC), making it the choice for hot weather applications.

The thick, consistent lubricant does not liquefy or separate with hot aging; it scoops and applies easily to wire and cable without runs or drips in hot temperatures; and it will not evaporate too soon after pulls. The lubricant’s low friction coefficient lessens the chance of wire damage from high pulling forces, wipes off the cable quickly and cleanly and leaves fewer residues in the conduit to block future pulls or prevent removal. Because 3MTM Wire Pulling Lubricant Wax can be immersed in water for 30 minutes with minimal weight loss, it is also the choice for wet weather applications.

3M™ Wire Pulling Lubricant GelThis is a water-soluble, translucent white gel that is easy to handle and apply to wire and cable without runs or drips. The lubricant produces a low coefficient of friction that lessens the chance of wire damage from high pulling forces.

Not only does 3MTM Wire Pulling Lubricant Gel make wire pulling jobs smoother and safer, it also wipes off the cable quickly and cleanly before terminating or splicing. The consistent gel does not liquefy, or separate with hot or cold aging. It stays thick, smooth and ready to apply. Temperature use range is 20oF (-6 oC) to 110 oF (43 oC).

3M™ Cable & Wire Lubricant

Produces a low coefficient of friction for smooth, low tension wire and cable pulling. Easy to apply without runs or drips. Colourless and non-staining.

3M’s complete line of Wire Pulling Lubricants are designed for specific applications, so you can choose the right lubricant for the job at hand.

You can count on 3M reliability through high pulling forces, extreme temperature changes, wet weather and the damaging effects of time.

Lubricant3M™

Cable & Wire

38 39

3M™ DBy/DBR - Direct Bury Joint Kits

3M DBY, DBY Kits provide quick, reliable underground splicing for irrigation and sprinkler systems, landscape lighting and other projects. Specially designed plastic insulator tube comes pre-packaged containing insulating gel.

Locking fingers in the tube ensure that the Scotchlok Spring Connector stays in position, the closed tube cover provides strain relief, and the design protects against corrosion failure. Application temperature range is 0°C - 49°C

With 3M Direct Bury Splice Kits, there’s no mixing, no mess. Just slide your connection (Scotchlok Y or R Connectors only) into the insulator tube, close and bury.

DBR Kit contains the R Type Scotchlok Spring Power ConnectorDBY Kit contains the Y Type Scotchlok Spring Power Connector

* Copper conductors only

Y 1 5-6

1.5 4-5

2.5 2-5

4 2-4

R 1 5-6

1.5 4-6

2.5 2-5

4 2-4

6 2

B/G 2.5 3-6

4 2-5

6 2-4

10 2

Conductor Combinations*ConnectorCross section Quantity sol/str (mm2)

Scotchlok Electrical Spring Connectors

ScotchlokTM Y, R, G and B Electrical Spring Connectors are the original colour-coded wire connectors. They are flexible yet durable with an outer insulator that gives you a compact, fully insulated connection that won’t cut or abrade wires.

3M™

Electrical Spring ConnectorsScotchlok

Features These four spring connectors have a corrosion-resistant steel inner shell to strengthen them while permitting spring expansion and contraction due to temperature changes.

A deep, flared skirt makes wire insertion easier and protects against faults.

The design and a flexible base let Scotchlok connectors bend with the wires you’re slicing to fit easily into tight places.

Color coded, with a flexible base allowing easy bending and An outer insulator that gives a compact, fully insulated connection that won’t cut or abrade wires.

Corrosion-resistant steel inner shell to strengthen while permitting spring expansion and contraction due to temperature changes.

ApplicationThe live action spring delivers reliable, vibration-resistant connections over a wide range of wire

3M™ Scotchlok™ Electrical Spring Connector

40 41

Ditection of overheating in electrical equipment and wiring

3M™ Infrared Thermometers3MTM IR 500 Infrared ThermometerThis Laser Sighted, lightweight and durable instrument allows accurate, non-contact surface temperature measurements from -18° to 260°C (0° to 500°F) at a safe distance. The single-point laser sighting accurately ‘spots’ trouble up to 4 feet away.

Features Non-contact temperature measurement Laser sighting Easy to use - one button operation Back-lit LCD display Wide -18° to 260°C temperature range Celsius to Fahrenheit switchable Powered by 9V battery (included) Pocket sized

Applications Monitor electric motors Locate loose wire connections Diagnose nuisance tripping of circuit breakers Check lighting ballasts and transformers

Scotchcast™ Constant Force SpringsScotchcast™ Constant Force Springs are a range of solderless connections for use on lead or aluminium sheaths and copper screened cables.

The springs are easily applied by rolling onto the sheath connections, whereupon it continues to exert a constant pressure.

Springs

P59 3.5 9 80 4 10

P60 7.5 10 175 9 15

P61 11 16 225 14 22

P62 14.5 16 295 18.5 29

P63 18.5 16 375 23.5 37

P64 25 16 505 31 50

P65 32 20 710 44 70

P66 44 20 935 58 94

P67 57 20 1250 70 110

PART NUMBER INNER DIAMETEROF SPRING

SPRINGWIDTH

SPRING TAPELENGTH (mm)

MINDIAMETER

MAXDIAMETER

3M™Constant Force

42 43

3M Saudi Arabia(Branch of The 3M Company)Post Box: 21840Riyadh 11485, K.S.A.Tel : +9661 465 0052Fax: +9661 465 8980

Lebanon BranchPO Box 11-5025Riad El Solh - Beirut 1107 2180Tel: +961 (1) 373771 Fax: +961 (1) 379947 - 379938

Kuwait BranchPO Box 148, Safat 13002, KuwaitTel: +965 249 1649 Fax 965 249 1648

Gulf Offices

3M Gulf Ltd. 3/F, Bldg. No. 11,Dubai Internet CityP.O. Box 20191, Dubai, UAETel: +971 4 3670 777Fax: +971 4 3670 998

PowerIndustry Solutions...3M Cold Shrink Termination Kits ( For XLPE, Screened Armoured Cables ) 3M...

Documents

Transcript of PowerIndustry Solutions...3M Cold Shrink Termination Kits ( For XLPE, Screened Armoured Cables ) 3M...