Company Processes and Capacities

Metal Finishing Company, McLean Division, Wichita KS

• Abrasive Blasting (Glass, Aluminum Oxide, Plastic Media, Satin Finishes)

• Acid Pickle (tank sizes –Cad 84” x 30” X 48”, Nickel 96” X 29” X 48”, Zinc 144” X 48” X 84”)

• Alkaline Cleaning (tank sizes –Cad 84” X 21” X 42”, Nickel 96” X 29” X 48”, Zinc 144” X 40” X 84”)

• Alodines 600, 1200, 1500, 1800 (tank sizes – 48” X 24” X 60”)

• Anodizing (Sulfuric, Boric/Sulfuric & Chromic) Types I & II * Phosphoric equipment in place , (tank size – 190” x 36” x 60")

• Anodizing Type 2, Class 2 Dyes, Gold, Black, Blue, Red, Green (tank size 36” X 23” X 60”)

• Black Oxide Coating (tank sizes – 60” x 20” x 28")

• Cadmium Plating (tank sizes – 84” x 48" x 42") Types I,II & III

• Chemical Conversion Coating (tank sizes – 192” x24” x 60”) Type I, HI

• Cleaning and Descaling

• Copper Plating (tank sizes –36” x 23” x 36")

• Curing Prime/Paint

• Dow 17 Anodize sizes –48” x 30'”x38”) Types I & II, Classes C & D

• Dow 7 Treatment (tank sizes - 84" x 29” x 42")

• Dry Film Lubrication

• Decorative Chrome (tank sizes – 96” x 54” x 48”)

• Electroless Nickel Plating (tank sizes – 24” x 36”x 32”) Class 1 & 2

• Gold Strike & Gold Plating (tank sizes 24" x 24" x 30")

• Hard Anodize Type III (tank sizes - 125'”x23” x 40") Class 1 & 2

• Hard Chrome Plating Class 1 & Class 2 – 5 Cells – Tank Sizes (120” x 36” x 48”)

Metal Finishing Company, McLean Division, Wichita KS (continued)

• Hydrogen Embrittlement Relief & Stress Relief Bakes 10 Ovens (0-1000°F)

• Masking, all media

• Nickel Plating (tank sizes – 96”x 54" x 48")

• Nickel Strike (tank sizes – 84” x 21” x 42")

• Passivation (tank sizes – 84" x 16" x 42"); Type II, VI & VIII

• Part Marking, via ink jet

• Phosphates Coating- Zinc & Manganese (tank sizes - 34" x 24" x 42")

• Phosphate Fluoride Coating of titanium (Tank size 96" x 22" x 40")

• Pickle & Oiling (tank sizes – 86" x 36" x 42")

• Polishing

• Prime/Paint, three paint facilities

• Shot Peen Machine,(2) Wheelabrator Pneumatic, 18” wheel

• Shot Peening Inner Diameter Machine

• Shot Separator, Sweco

• Silver Plating (tank sizes – 24" x 24" x 30"); Types 1, 2, & 3

• Stress Relieve Baking

• Teflon Coating

• Tin Plating (tank sizes – 24" x 24”x 30")

• Vapor Degreasing using a Detrex Model 2000S

• Zinc Nickel (tank sizes – 24” x 24” x 30”)

• Zinc Plating Rack and Barrel (tank sizes - 144" x 84” x 84") Types I & II

Metal Finishing Company, NDT Services Quest Division, Wichita KS

• ASNT NDT Level III consulting

• AWS Certified Weld Inspection

• Conductivity, Hardness Testing and Temper Verification

• Eddy Current Inspection of aerospace and FAA Repair Station Parts

• Fluorescent Penetrant Inspection/Chemical Conversion dedicated to quick turn of aluminum parts

• Leak Testing using the Pressure Rise and Bubble Test Methods

• Magnetic Particle Inspection units, 3 total (2 multi-directional and 1 conventional unit with 56" limitation)

• Pre weld/braze cleaning of ferrous and non-ferrous materials (Tank size 96" x 22' x 40")

• Ultrasonic Inspection

• Ultrasonic Inspection of Composite Parts and Structures (Guss 9 System)

• Welder and Weld Procedure Qualification (MIL-STD, AWS, ASME, Aerospace)

• X-Radiography of composites, cast and welded sub-assemblies

Metal Finishing Company, Flame Spray Division., Wichita KS

• Thermal or Plasma coatings in a wide variety

• Testing Services

• Machining capabilities

Metal Finishing Company, Murdock Division, Wichita KsQuick Turn Facility Aluminum Processing Only - Three foot maximum size restriction

• NDT Services for Aluminum, Steels and Composites

• Penetrant Inspect

• Chem Film

• Non- Chromic Acid Anodize

• Boric / Sulfuric Acid Anodize

• Prime

• Paint

• Top Coat Applications

Diversified Services Division, Wellington Division

• Processes tanks 960”(80 feet) x 60” x 24”

• Chemical Conversion Type 1 and 3

• Chromic Acid Anodize Type I and IB

• Fluorescent Penetrant Inspection

• Parts Masking

• Prime/Paint

• Shot Peening

• Curing and Part Marking

Metal Finishing Company, Aluminum Heat Treatment Division, Wichita, Ks

• Aluminum Solution Furnaces Work Zones (Large) 6’ W X 6’ D X 12’ L, (Small) 4’ W X 4’ D X 6’ L (Water, Hot Water, and Glycol quench capabilities)

• (14) Aluminum Aging Furnaces (Size Range) 2’ W X 2’ D X 2’ L – 5’W X 6.5’ T X 23’ L

• (1) Freezer 14’ W X 23’ D X 9’ T (20F to -15F) with Walk In Cooler 8’ W X 20’ L X 8’ T (15 F to 30F)

• (1) Freezer Truck (Freezer Dimensions) 7’ W X 7’ T X 10’ D (20 F to -10 F)

• Hand Form capabilities (5) Certified Granite Tables, (2) Shrinker/Stretchers, and (1) Arbor Press

• Lab with (3) New Age Hardness Testers, (2) Fischer Sigma Scope Conductivity Meters, (1) Clark Portable Hardness Tester

Metal Finishing Company, Hard Metal Heat Treatment Division, Wichita KS

1. (2)ea Abar-Ipsen 2 Bar Vacuum furnace 1ea (24” X 24” X 36”) 1ea (30” X 30” X 48”)a. heat treat tool steelb. anneal stainless steelc. anneal inconeld. solution anneal precipitation hardening steelse. aging of precipitation hardening steelsf. copper brazingg. nickel brazing

2. (2)ea Surface Combustion Super All case integral quench (one with top cool capability)3. 30” X 30” X 48” and all required support equipment

a. Quench and temper (neutral hardening)b. Normalizingc. Annealingd. Carburizinge. carbo-nitriding

4. (4)ea Tempering Furnaces (300 – 1400F) 30” X 30” X 48”a. Support of both Vacuums and integral quenchb. Hardening of P.H. Steels

5. Fully equipped Metallurgical laba. Hardness testing machines

i. Standardii. Superficialiii. Micro hardness

b. Case determinationi. Cutoff sawii. Mounting pressiii. Polishing equipmentiv. Tukon hardness testing

Metal Finishing Company, Chihuahua Mexico Division

Metal Finishing, CUU Div., NADCAP Accredited 2012

• Degrease

• NDT Services, Penetrant Inspect

• Wet Processing of Aluminum Parts1. Chemical Conversion2. Chromic Acid Anodize3. Sulfuric Acid Anodize (Equipment installed)4. Boric / Sulfuric Acid Anodize (Equipment installed)

• Masking Services

• Primer Applications

• Top Coat Applications

• Inspection Services

Metal Finishing, CUU Div. -Stage Two Additions Late 2013 based on customer requirements

• Blasting and Polishing Services

• NDT Services, Magnetic Particle Inspect

• Wet Processing of Alloy Metals, Titanium and Stainless Steels1. Cadmium Plating2. Chrome Plating 3. Passivate 4. Possible others as required, Copper, Tin, Zinc Nickel, Manganese

Phosphate, Nickel, Phosphate Fluoride

• Dry Lube Applications

• Oil Applications

MFCO International Headquarters - 1329 S. McLean Blvd. Wichita KS 67213, 316-267-7280MFCO Wichita Facility - 1423 S. McLean Blvd. Wichita KS 67213, 316-267-7289MFCO NDT Division - 1329 S. McLean Blvd. Wichita KS 67213, 316-267-1259

MFCO Murdock Div. - 701 E. Murdock Wichita KS 67214, 316-263-1610Diversified Services Div. - 28 Clark Ave. Wellington KS 67152, 620-326-7655

MFCO Flame Spray Div. - 1441 S. McLean Blvd. Wichita KS 67214, 316-267-8041Metal Finishing Co. MX Div.- AV Nicolas Gogol #11332 Chihuahua City MX 31136, 614-483-1559