POWER LINE COMMUNICATION

17
A SOLUTION TO REMOTE DETECTION OF ILLEGAL ELECTRICITY USAGE Via POWER LINE COMMUNICATION

description

 

Transcript of POWER LINE COMMUNICATION

Page 1: POWER LINE COMMUNICATION

A SOLUTION TO REMOTE DETECTION OF

ILLEGAL ELECTRICITY USAGE

Via POWER LINE COMMUNICATION

Page 2: POWER LINE COMMUNICATION

DIVYANSHU GANGAL B.tech, 3rd YEAR ROLL NO-1004220020 M.M.M ENGINEERING COLLEGE

Presented by

Page 3: POWER LINE COMMUNICATION

PLC Presents an interesting and economical solution for automatic meter reading (AMR).

If an AMR system via PLC is set in a power delivery system, a detection system for illegal electricity usage may be easily added in the existing PLC network.

In the detection system, the second digitally energy meter chip is used and the value of energy is stored. The recorded energy is compared with the value at the main kilowatt-hour meter.

In the case of difference between two recorded energy data, in error signal is generated and transmitted via PLC network.

ABSTRACT

Page 4: POWER LINE COMMUNICATION

The automatic meter reading(AMR) system as become a necessity for most suppliers as deregulation, free customer choice and open market competition occur in the energy supply sector.

INTRODUCTION

Page 5: POWER LINE COMMUNICATION

POWER THEFT

Page 6: POWER LINE COMMUNICATION

PLC installation

Page 7: POWER LINE COMMUNICATION

Power meters with PLC modules near the top of the power polls. Previously, it was enough to install power meters in high places, not in low places such as the house wall, to prevent users from using power illegally by connecting cables, or by using tampered meters.

INSTALLTION OF PLC

Page 8: POWER LINE COMMUNICATION

Methods Of Illegal Electricity Usage1. Using the mechanical objects2. Using a fixed magnet3. Using the external phase before

meter terminals4. Switching the energy cables at the

meter connector box

DETECTION OF ILLEGAL ELECTRICITY USAGE

Page 9: POWER LINE COMMUNICATION

AMR(AUTOMATIC REMOTE READING) automates the process of measurement through digital communication techniques.

DEFINITION ON AMR

Page 10: POWER LINE COMMUNICATION

DETECTION AND CONTROL SYSTEM

Page 11: POWER LINE COMMUNICATION

Most economically viable technology for transferring Meter data to DCU.

Uses the technique of communicating the data over existing Electrical Lines which carry LT power to the site.

Since the connection point is usually in the air or at underground, it is not suitable for anyone to access, such that its control is easy.

It is very economical and is reliable solution when it is compared with the economical loss caused by illegal usage.

ADVANTAGE OF THIS SYSTEM

Page 12: POWER LINE COMMUNICATION

ILLEGAL DETECTOR SYSTEM FOR ONE SUBSCRIBER

Page 13: POWER LINE COMMUNICATION

System simulation and modeling of the detection system of illegal electricity usage for electromechanical

kilowatt-hour meters

Page 14: POWER LINE COMMUNICATION

Every user has two PLC modems; one is for AMR and the other is used to send the data from second energy meter chip to host PLC modem.

An energy meter must be connected in the connection box between a home line and main power lines.

The host PLC unit must be placed in the distribution transformer and the configuration of the addressing format of PLC signaling must be designed carefully.

AMR SYSTEM PERFORMS THE FOLLOWING FUNCTONS

Page 15: POWER LINE COMMUNICATION

illegal usage of electricity may detected Once this proposed system is tried in real

power lines, the distribution losses can be reduced effectively.

CONCLUSION

Page 16: POWER LINE COMMUNICATION

QUERIES

Page 17: POWER LINE COMMUNICATION

TO ONE & ALL…