1 Logo
*
Logo
*
Abbreviated name
ConstVal
Description
This parameter is the correction value when calculating the initial transmission power of PRACH preamble.
Range and Step
Unit
dB
Logo
*
Abbreviated name
PRStep
Description
This parameter indicates the power ramp step used by the UE when it does not receive any responses from AICH after sending a preamble. This parameter is used to be added to the previous power, and then the next preamble is sent at this new power.
Range and Step
Unit
dB
Logo
*
Power Offset between PRACH Control Part and PRACH Data Part
Abbreviated name
Description
This parameter indicates the power offset between control part of the PRACH message part and the last preamble. It should be configured for each TFC. Where MAX_PRACH_TFC=32.
Range and Step
Unit
dB
Logo
*
PschPwr
Description
PSCH transmission power. This parameter is the offset relative to PCPICH power.
Range and Step
Unit
dB
Logo
*
SschPwr
Description
SSCH transmission power. This parameter is the offset relative to PCPICH power.
Range and Step
Unit
dB
Logo
*
PcpichPwr
Description
This parameter indicates the transmission power level of the Primary CPICH (Common Pilot Channel), which is an absolute value.
Range and Step
Unit
dBm
Logo
*
BchPwr
Description
BCH transmission power. This parameter is the offset relative to PCPICH transmission power. BCH is mapped one to one to PCCPCH physical channel. In addition, one cell only contains one PCCPCH/BCH.
Range and Step
Unit
dB
Logo
*
PchPwr
Description
This parameter indicates the transmission power of the PCH mapped on the SCCPCH, which is a power offset relative to the PCPICH power.
Range and Step
Unit
dB
Logo
*
MaxFachPwr
Description
This parameter indicates the maximum transmission power of the FACH which is mapped on the SCCPCH. This parameter is the relative value based on the PCPICH transmission power.
Range and Step
Unit
dB
Logo
*
PichPwr
Description
This parameter indicates the PICH transmission power, which is an offset relative to the Primary CPICH power.
Range and Step
Unit
dB
Logo
*
AichPwr
Description
This parameter indicates the AICH transmission power, which is an offset relative to the Primary CPICH power.
Range and Step
Unit
dB