Portable Wireless Server indicator lamp Quick Start GuideTransfer PC content USB connection Step1:...

of 2/2
4-454-824-12 (1) Portable Wireless Server Quick Start Guide Read this Quick Start Guide when using this unit with a smartphone or tablet. When using this unit with a computer, download “Quick Start Guide for Computer users” from the following web site. http://www.sony.net/pws/ Thank you for your purchase. This Quick Start Guide is designed to easily get you set up so you can start enjoying the benefits of the device. © 2013 Sony Corporation Printed in China WG-C10 Series Identifying the Parts Wireless LAN indicator lamp Battery indicator lamp (power) button Strap holder RESET (reset) switch Memory card slot Memory card access lamp USB A port For charging a smartphone or tablet For connecting to a USB memory or digital still camera USB micro B port For charging this unit For connecting to a computer MAC address Serial number The MAC address and serial number shown on the label on the bottom of this unit may be needed for various settings. Write them down in the below space. Expressions in this Guide WG-C10 This unit Smartphone/tablet Device Lamp Indicator of this Unit Battery indicator lamp Charging indicator Lamp condition Status Amber Charging underway Amber -> off Charging is complete Remaining battery level indicator in use Lamp condition Status Green, blinking slowly Battery level is high Green, blinking Battery level is medium Red, blinking rapidly Battery level is low Off Battery runs out or power-off Wireless LAN indicator lamp Lamp condition Status Green Wireless LAN is starting up Green, blinking Wireless LAN is on Off Power-off Memory card access lamp Lamp condition Status Amber, blinking Accessing memory card Setting Procedure Step1: Charging this Unit Step2: Installing the App Step3: Connecting by Wireless LAN for the First Time Step4: Security Set-up Step5: Reconnecting to the Wireless LAN Examples of Use Wi-Fi Storage USB memory Memory card WG-C10 View & Transfer content Transfer content Smartphone Tablet PC Wi-Fi connection Battery Charger WG-C10 Power feeding Smartphone USB connection USB Card Reader Memory card WG-C10 Transfer content PC USB connection Step1: Charging this Unit This unit has a built-in rechargeable battery pack. Charge this unit before use. Charge this unit from a computer or with a USB AC adaptor (sold separately). When charging from a computer Connect this unit to your computer with the USB cable (supplied). Battery indicator lamp (amber) During charging: On Charging complete: Off USB cable (supplied) Approximate charging time: Approx. 8 hours Charging underway: • Wireless LAN function cannot be used. • You can do up to Step2. When charging with a USB AC adaptor (sold sepalately)* Connect the USB cable (supplied) to this unit and the USB AC adaptor (sold separately or the one supplied with your device), and connect the USB AC adaptor to the wall outlet (wall socket). Approximate charging time: Approx. 3.5 hours (When using AC-UD10) Approximate charging time varies depending on the USB AC adaptor (sold separately) used. Charging underway: • Can read and write data to a memory card via a wireless LAN. • USB devices connected to this unit cannot be used. • You can do from Step2 onward. * A USB AC adaptor is not supplied with this unit. For more information about USB AC adaptors that have been confirmed to work with this unit, see the Help Guide (http://rd1.sony.net/help/pws/c10/ gb/). When charging is complete, the battery indicator lamp turns off. When charging is complete, remove the USB cable. Step2: Installing the App To operate this unit, install PWS Manager onto your device. See the Help Guide (http://rd1.sony.net/help/pws/ c10/gb/) for compatible operating systems and a list of devices that have been confirmed to work with this unit. 1 Install the app. Search for PWS Manager in Google Play or the App Store and install it. PWS Manager Note The app is free. However, there may be a communication fee for downloading. Android : After installing, tap [Complete] and the icon is displayed. iOS *: After installing, the icon is displayed. * iOS is the operating system of iPhone, iPad and iPod touch. After installing, go Step3 without launching the app. Step3: Connecting by Wireless LAN for the First Time Connect this unit to your device by wireless LAN. Do this setting after installing the PWS Manager app. Note When this connection is made, the internet connection of your device is disconnected. To reconnect to the internet, see the Help Guide. 1 Turn on the power. Press and hold down the (Power) button (for 3 seconds or more). When this unit’s start-up is complete, the green wireless LAN indicator lamp stops blinking and remains lit. 2 From the setup menu of your device, turn Wi-Fi on and open the Wi-Fi Networks screen. Android iOS ABC123456 Wi-Fi Secured with WPA (protected network available) BBBBBB XXXXXX Secured with WPA/WPA2 (protected network available) 000000 Secured with WPA2 (protected network available) AAAAAA Secured with WPA/WPA2 (protected network available) DEFGH789 Secured with WPA/WPA2 (protected network available) WG-C10-XXXXXX Secured with WPA2 Scan Add network Settings Wi-Fi Wi-Fi Choose a Network... ABC123456 ON WG-C10-XXXXXX BBBBBB 000000 AAAAAA DEFGH789 XXXXXX EEEEEE CCCCCC 3 Tap this unit’s SSID [WG-C10-XXXXXX]* from the list of Wi-Fi networks to connect. * “xxxxxx” is the last 6 digits of the MAC address. The MAC address is shown on the back side of this unit. 4 Confirm the connection. Android iOS ABC123456 Wi-Fi Secured with WPA (protected network available) BBBBBB WG-C10-XXXXXX Connected Settings Wi-Fi Wi-Fi Choose a Network... ABC123456 ON WG-C10-XXXXXX Android : Connection is completed when “Connected” is displayed under the selected SSID and is displayed at the top of the screen. iOS : Connection is completed when there is a tick to the left of the selected SSID and is displayed at the top of the screen. This unit is now connected to your device by wireless LAN.
  • date post

    04-Aug-2020
  • Category

    Documents

  • view

    0
  • download

    0

Embed Size (px)

Transcript of Portable Wireless Server indicator lamp Quick Start GuideTransfer PC content USB connection Step1:...

  • WG-C10 Series QSG 4-454-824-12 (1) GB WG-C10 Series QSG 4-454-824-12 (1) GB

    4-454-824-12 (1)

    Portable Wireless Server

    Quick Start Guide

    Read this Quick Start Guide when using this unit with a smartphone or tablet.

    When using this unit with a computer, download “Quick Start Guide for Computer users” from the following web site.http://www.sony.net/pws/

    Thank you for your purchase. This Quick Start Guide is designed to easily get you set up so you can start enjoying the benefits of the device.

    © 2013 Sony Corporation Printed in China

    WG-C10 Series

    Identifying the Parts

    Wireless LAN indicator lamp

    Battery indicator lamp

    (power) button

    Strap holder

    RESET (reset) switch

    Memory card slot

    Memory card access lamp

    USB A portFor charging a smartphone or tabletFor connecting to a USB memory or digital still cameraUSB micro B port

    For charging this unitFor connecting to a computer

    MAC address

    Serial number

    The MAC address and serial number shown on the label on the bottom of this unit may be needed for various settings. Write them down in the below space.

    Expressions in this Guide

    WG-C10 This unitSmartphone/tablet Device

    Lamp Indicator of this Unit

    Battery indicator lamp Charging indicator

    Lamp condition Status

    Amber Charging underway

    Amber -> off Charging is complete

    Remaining battery level indicator in use

    Lamp condition Status

    Green, blinking slowly Battery level is high

    Green, blinking Battery level is medium

    Red, blinking rapidly Battery level is low

    Off Battery runs out or power-off

    Wireless LAN indicator lamp

    Lamp condition Status

    Green Wireless LAN is starting up

    Green, blinking Wireless LAN is on

    Off Power-off

    Memory card access lamp

    Lamp condition Status

    Amber, blinking Accessing memory card

    Setting Procedure

    Step1: Charging this Unit

    Step2: Installing the App

    Step3:Connecting by Wireless LAN for the First Time

    Step4: Security Set-up

    Step5: Reconnecting to the Wireless LAN

    Examples of Use

    Wi-Fi Storage

    USB memory

    Memory card

    WG-C10

    View & Transfer content

    Transfer content

    Smartphone

    Tablet

    PC

    Wi-Fi connection

    Battery Charger

    WG-C10

    Power feeding Smartphone

    USB connection

    USB Card Reader

    Memory card

    WG-C10

    Transfer contentPC

    USB connection

    Step1: Charging this UnitThis unit has a built-in rechargeable battery pack.Charge this unit before use.

    Charge this unit from a computer or with a USB AC adaptor (sold separately).

    When charging from a computerConnect this unit to your computer with the USB cable (supplied).

    Battery indicator lamp (amber)

    During charging: On

    Charging complete: Off

    USB cable (supplied)

    Approximate charging time: Approx. 8 hours

    Charging underway: • Wireless LAN function cannot be used. • You can do up to Step2.

    When charging with a USB AC adaptor (sold sepalately)*Connect the USB cable (supplied) to this unit and the USB AC adaptor (sold separately or the one supplied with your device), and connect the USB AC adaptor to the wall outlet (wall socket).

    Approximate charging time: Approx. 3.5 hours (When using AC-UD10)

    Approximate charging time varies depending on the USB AC adaptor (sold separately) used.

    Charging underway: • Can read and write data to a memory card via a wireless LAN.

    • USB devices connected to this unit cannot be used.

    • You can do from Step2 onward.

    * A USB AC adaptor is not supplied with this unit.

    For more information about USB AC adaptors that have been confirmed to work with this unit, see the Help Guide (http://rd1.sony.net/help/pws/c10/gb/).

    When charging is complete, the battery indicator lamp turns off.When charging is complete, remove the USB cable.

    Step2: Installing the App

    To operate this unit, install PWS Manager onto your device.

    See the Help Guide (http://rd1.sony.net/help/pws/c10/gb/) for compatible operating systems and a list of devices that have been confirmed to work with this unit.

    1 Install the app.Search for PWS Manager in Google Play or the App Store and install it.

    PWS Manager

    NoteThe app is free. However, there may be a communication fee for downloading.

    Android :After installing, tap [Complete] and the icon is displayed.

    iOS *:After installing, the icon is displayed.* iOS is the operating system of iPhone, iPad

    and iPod touch.

    After installing, go Step3 without launching the app.

    Step3:Connecting by Wireless LAN for the First Time

    Connect this unit to your device by wireless LAN.

    Do this setting after installing the PWS Manager app.

    NoteWhen this connection is made, the internet connection of your device is disconnected. To reconnect to the internet, see the Help Guide.

    1 Turn on the power.Press and hold down the

    (Power) button (for 3 seconds or more).

    When this unit’s start-up is complete, the green wireless LAN indicator lamp stops blinking and remains lit.

    2 From the setup menu of your device, turn Wi-Fi on and open the Wi-Fi

    Networks screen.

    Android iOS

    ABC123456

    Wi-Fi

    Secured with WPA (protected networkavailable)

    BBBBBB

    XXXXXXSecured with WPA/WPA2 (protected network available)

    000000Secured with WPA2 (protected networkavailable)

    AAAAAASecured with WPA/WPA2 (protected network available)

    DEFGH789Secured with WPA/WPA2 (protected network available)

    WG-C10-XXXXXXSecured with WPA2

    Scan Add network

    Settings Wi-Fi

    Wi-Fi

    Choose a Network...

    ABC123456

    ON

    WG-C10-XXXXXX

    BBBBBB

    000000

    AAAAAA

    DEFGH789

    XXXXXX

    EEEEEE

    CCCCCC

    3 Tap this unit’s SSID [WG-C10-XXXXXX]* from the list of Wi-Fi networks to connect.

    * “xxxxxx” is the last 6 digits of the MAC address.The MAC address is shown on the back side of this unit.

    4 Confirm the connection.Android iOS

    ABC123456

    Wi-Fi

    Secured with WPA (protected networkavailable)

    BBBBBB

    WG-C10-XXXXXXConnected

    Settings Wi-Fi

    Wi-Fi

    Choose a Network...

    ABC123456

    ON

    WG-C10-XXXXXX

    Android :Connection is completed when “Connected” is displayed under the selected SSID and is displayed at the top of the screen.

    iOS :Connection is completed when there is a tick to the left of the selected SSID and is displayed at the top of the screen.

    This unit is now connected to your device by wireless LAN.

  • WG-C10 Series QSG 4-454-824-12 (1) GB WG-C10 Series QSG 4-454-824-12 (1) GB

    Step4:Security Set-up

    Important! It is very important that you set up security in order to use a wireless LAN device.

    If you do not set up security, other compatible devices within transmission range can connect to this unit.

    If this unit’s security has already been set, you do not have to set it again from the other device.When setting this unit, turn its power on.

    1 Launch the PWS Manager app installed on your device.

    2 When the app is launched, tap the [ ] button at the bottom right of the screen.

    A message is displayed. Tap [OK].

    3 Select [Security] and select [WPA2].Android iOS

    Security

    None

    WEP

    WPA

    WPA2

    Back Save

    Back SaveSecurity

    None

    WEP

    WPA

    WPA2

    4 Enter a personal password of at least 8 numbers or letters and select [OK].

    Android iOS

    Security

    None

    WEP

    WPA

    WPA2

    Back Save

    Enter a new password

    Enter password

    Enter a password of at least 8 characters.

    Cancel OK

    W2

    E3

    R4

    T5

    Y6

    U7

    I8

    O9

    P0

    A S D F G H J K L

    Z X C V B N M

    Q1

    Back SaveSecurity

    None

    WEP

    WPA TKIP

    WPA2 PSK

    A S D F G H J K L

    Q W E R T Y U I O P

    Z X C V B N M

    Enter a new password

    Cancel OK

    Enter a password of at least 8 characters.

    5 Reenter your password to confirm it and select [OK].

    A message is displayed. Tap [OK].

    When you set your password, the wireless LAN connection is disconnected.Go to the next setting in Step5.

    Step5:Reconnecting to the Wireless LAN

    When setting this unit, turn its power on.

    1 From the setup menu of your device, turn Wi-Fi on and open the Wi-Fi Networks screen.

    2 Tap this unit’s SSID [WG-C10-XXXXXX]* from the list of Wi-Fi networks to connect.

    * “xxxxxx” is the last 6 digits of the MAC address.

    3 Enter your password.Enter the password you set in 4 of “Step4: Security Set-up”.

    Android iOS

    w e r t y u i o p

    a s d f g h j k l

    z x c v b n m

    q

    Show password

    Show advanced options

    Cancel

    Password

    Connect

    WG-C10-XXXXXX

    A S D F G H J K L

    Q W E R T Y U I O P

    Z X C V B N M

    Enter PasswordCancel Join

    Enter the password of “WG-C10-XXXXXX”

    Password

    4 Confirm the connection.Check in the same way as in 4 of “Step3: Connecting by Wireless LAN for the First Time”.This unit is now connected to your device by wireless LAN.

    If an authentication error occurs:The password may be wrong.

    If you forgot your password:Press and hold down the RESET (reset) button for about 10 seconds to return to the factory default condition. Then set the password again from “Step3: Connecting by Wireless LAN for the First Time”.

    From next time, you do not need to enter the password when connecting to a device set up for this unit.

    How to Use the App PWS Manager

    Tap the PWS Manager icon on your device to launch the app.

    When launching the app, the following screens appear.If another screen appears, press or the [Back] button to go back to the start-up screen.

    Android iOS

    Photo1.jpg

    PWS Manager

    Photo2.jpg

    Movie.mp4

    Graph.xls

    Folder1

    Music.mp3

    Photo3.jpg

    XLS

    a b c

    XLS

    Photo4.jpg

    Photo1.jpg

    Movie.mp4

    Folder1

    Music.mp3

    Photo3.jpg

    Photo2.jpg

    Graph.xls

    a b d

    Device switching buttonTap each button to display the list of files and folders in each device.a: Data in the memory card inserted into this unitb: Data in the USB device connected to this unitc: Data in your deviced: Date in the camera roll

    Data update Copy Delete Sort Settings

    Move to the screen for setting security, internet connection or firmware update.

    File/Folder listIf no memory card is inserted into this unit, no USB device is connected to this unit, or the memory card inserted into this unit or USB device connected to this unit contain no data, nothing shows on the file/folder list screen.

    NoteRemoving the memory card or USB device from this unit during transfer content can damage important data. Before removing them, check the access lamp of this unit.

    Help Guide

    For details of the app’s operating method, go to Settings [Help] in the app.

    You can also refer to the app’s operating method in the following Help Guidehttp://rd1.sony.net/help/pws/c10/gb/

    How to Power Other Devices

    1 Connect the supplied USB cable* to the device you want to power.

    * For connecting an iOS device, use the special cable supplied when you purchased that device.

    Before Powering • Turn on the power to this unit. • Check that the remaining battery level of this unit is sufficient.

    Power supply • The output of this unit is 500 mA maximum. If the output exceeds 500 mA while power is being supplied, a safety function turns off the power supply.

    2 Connect the other end of the USB cable to the USB A port of this unit.

    * See the online manual here for a list of devices that support power feeding.http://rd1.sony.net/help/pws/c10/gb/

    Turning off the power

    1 Press down the (power) button (for 3 seconds or more).

    Wireless LAN indicator lamp and battery indicator lamp turn off.

    NoteDo not turn off the power of this unit during data transfer.

    Trademarks

    • Apple, iPhone, iPad, iPod touch and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries.

    • App Store is a service mark of Apple Inc. • Android and Google Play are trademarks of Google Inc.

    • Wi-Fi® and Wi-Fi Alliance® are registered marks of the Wi-Fi Alliance.

    • WPA™ and WPA2™ are marks of the Wi-Fi Alliance.

    Other product names, trade names, service names etc. used in this manual are trademarks or registered trademarks of their respective companies or organizations.The ™ and ® marks are not shown in this document.