PNMSj on Windows Virtual Server Installation Manual

8/9/2019 PNMSj on Windows Virtual Server Installation Manual

1/27

NWD-162569-02E

P ASOLINK

N ETWORK

MANAGEMENT

S YSTEM

PNMSj on WindowsVirtual Server

Installation Manual

NEC CorporationCopyright 2013


2/27

NWD-162569

- i -

Table of Contents

1 INTRODUCTION ..................................................................................................................... 1

2

INSTALLATION SEQUENCE ............................................................................................... 2

3 Server Machine Configuration ................................................................................................ 3

3.1 BIOS Setting ....................................................................................................................... 3

3.2 ESXi Installation ................................................................................................................ 4

4. Client Setting ............................................................................................................................. 6

4.1 vSphere Client installation ................................................................................................ 6

4.2

ESXi Setting........................................................................................................................ 9

4.2.1 Create Storage .......................................................................................................... 10

4.2.2 Time Configuration .................................................................................................. 11

4.2.3 Create Virtual Machine ........................................................................................... 12

4.3 OS installation(Virtual Machine) ................................................................................... 22

4.4 VMware Tools installation on Virtual machine............................................................ 24

5.

Install PNMSj application ...................................................................................................... 25

6. Configure PNMSj Server setting ........................................................................................... 25


3/27

NWD-162569

- 1 -

1 INTRODUCTION

This document describes the Virtual machine setting procedure for PNMSj.

NOTE

Refer to "PNMSj System Requirement Manual" for the

recommendation size of heap memory.


4/27

NWD-162569

- 2 -

2 INSTALLATION SEQUENCE

Start

ESXi Installation

vSphere Client Installation

ESXi Setting

OS Installation

PNMSj application installation.

PNMSj server configuration

End


5/27

NWD-162569

- 3 -

3 Server Machine Configuration

3.1 BIOS Setting

On BIOS setting window, check whether Virtualization Technology option is enabled.

(1)

Power on the server, then press the F2 button while BIOS starting up.

NOTE

BIOS setting start-up key may differ according to the

environment.

(2) On BIOS setting window, Enable the Virtualization Technology option.


6/27

NWD-162569

- 4 -

3.2 ESXi Installation(1)

Download the software from the following URL. Account Registration is required before

downloading.

http://www.vmware.com/Software name: VMware ESXi 5.1

Write to DVD device after downloading.

(2) Insert the VMware ESXi5.1 DVD ROM to the server machine.

(3)

On the [ Welcom to the VMware ESXi Installation ] window.

Press the Enter key to continue.

(4)

On [End User License agreement] window.

Press the F11 key(Accept and Continue).

(5) On [Select a Disc to Install or Upgrade] window.

Select the folder to be installed and press the Enter to continue.

(6) On [Please select a keyboard layout] window.

Select the US default and press the Enter to continue.

(7) On [Please enter a root password] window.

Input your Root password and Retype it to confirm.

Press the Enter key to Continue.

(8) On [Confirm install] window.

Press the F11 key(Install).

(9)

Eject the DVD media then press Enter to Reboot.

After [Installation Complete] window is appeared.

Eject the DVD media then press Enter to Reboot .

(10) Press the F2 key after rebooting.

(11) Input the password that you have created in step 7 then press Enter.

(12) Select theConfigure Management Network then press the Enter.

(13) Select the Network Adapters then press the Enter.

(14) Specify one of the NIC to be used by pressing Space key, then press Enter to continue.

NOTE

A DIFFERENT NIC ASSIGNED FOR NMS MUST BE

SELECTED. IN ADDITION TO THIS, ONE PNMSJ

SYSYEM REQUIRES ONE SEPARATE NIC.


7/27

NWD-162569

- 5 -

(15) SelectIP Configurationthen press Enter.

(16)

Select Set static IP address and network configuration,press the Space key(Mark

Selects), then input theIP address/Subnet Mask/Default gateway accordingly.

(17)

Press the Esc key to open Configure Management Network: Confirmwindow after

confirming that there are no mistakes in the setting value. Press Y to save the setting.


8/27

NWD-162569

- 6 -

4. Client Setting

vSphere Client installation is required to manage Virtual machine.

4.1 vSphere Client installation

(1) Download the software from the following URL. Account Registration is required beforedownloading.

http://www.vmware.com/

The software name: VMware vSphere Client 5.1Write to the device after downloading.

(2) Insert the device and double click .exe file.

(3) Select the Language and click [OK].

(4)

Click [Next >].


9/27

NWD-162569

- 7 -

(5) Click [Next >].

(6) Select I agree to the terms in the license agreement, then click [Next >].


10/27

NWD-162569

- 8 -

(7) Select the installation folder then click [Next >].

(8)

Click [Install].

(9) Click [Finish]to complete installation.


11/27

NWD-162569

- 9 -

4.2 ESXi Setting

Perform initial setting by connecting VMware vSphere Client and ESXi Server.

(1) Start the VMware vSphere Client.(2) Login in by typing IP address / User name / Password used in the chapter 3.2 ESX installation.

Due to guaranteed SSL certification is required in some case, security warning message mayappear required.


12/27

NWD-162569

- 10 -

4.2.1 Create Storage

When there is no Datastore, please create it by following procedure.

(1) Slect Home Inventory Inventory.Select Storagein Configuration Tab, then Click Add Storage.

(2) Select Disk/LUNthen [Next >].

(3) Specify the location for Data store then click [Next >].

(4) Select VMFS-5, then [Next >].

(5) Confirm disk layout, then [Next >].(6)

Input the name for Datastore, then [Next >].

(7)

Specify the capacities/sizes according the System Requirement Manual, then click [Next >].


13/27

NWD-162569

- 11 -

4.2.2 Time Configuration

(1) Select Home Inventory Inventory.

Select Time Configuration in Configuration Tab, then click on Properties.

(2)

Set the date and time for the host in the vSphere Clinets local time.Click [OK].


14/27

NWD-162569

- 12 -

4.2.3 Create Virtual Machine

(1)

Select Home Inventory Inventory.Select Networking in Configuration Tab. Click on Add Network.

(2) Select Virtual Machine, then click [Next >].


15/27

NWD-162569

- 13 -

(3) Select NIC, then click [Next >].

(4) Input the name for Network Label, then [Next >].


16/27

NWD-162569

- 14 -

(5) Click [Finish].

(6) Right click on ESXi server IP Address then select New Virtual Machine.


17/27

NWD-162569

- 15 -

(7) Select Custom then click[Next >].

(8)

Input the Virtual Machine name, then click [Next >].


18/27

NWD-162569

- 16 -

(9) Select a storage,then click [Next >].

(10) SelectVirtual Machine Version: 8, then click [Next >].


19/27

NWD-162569

- 17 -

(11) Select the following, then click [Next >].Guest Operating System: Windows

Version: MicrosoftWindows Server 2008 R2 (64-bit)


20/27

NWD-162569

- 18 -

(12) Set as following, then click [Next >].Number of virtual sockets: 1

Number of cores per Virtual sockets: The number into which the choice number of

possible cores was divided by the number of virtual machines.

(13) Specify the memory size by following System Requirement Manual, then click [ Next > ].


21/27

NWD-162569

- 19 -

(14) Set as following then [Next >].NIC: 1Network: Select the Network Label that you have created in step (4)

Adapter: VMXNET3

Connect at Power On: ON

(15)

Select LSI Logic SAS then click [Next >].


22/27

NWD-162569

- 20 -

(16)

Select Create a new virtual disk then click [Next >].

(17) Set as following then click [Next >].Capacity: Follow the Sysmte Requirement Manaul

Disc Provisioning: Thick Provision Eager Zeroed

Location: Store with virtual machine


23/27

NWD-162569

- 21 -

(18)

Leave as Default, click [Next >].

(19)

Click [Finish].


24/27

NWD-162569

- 22 -

4.3 OS installation(Virtual Machine)

OS(Windows Server 2008 R2) installation from vSphere Client

(1)

Select the Virtual machine that configured in section 4.2 ESXi setting above, right click onVirtual Machineselect Edit Setting.

(2) SelectCD/DVD drive 1 in Hardware Tab, Set as following and click [OK].

Device Type: Host DeviceDevice Status: Connect at power on


25/27

NWD-162569

- 23 -

(3) Insert the OS media to the server.(4)

Select the Virtual machine that configured in section 4.2 ESXi Setting.

Right click on Virtual Machine then select Open Console.

(5) Click the Power on buttonOS installation will be started.


26/27

NWD-162569

- 24 -

4.4 VMware Tools installation on Virtual machine

(1) From the console of Virtual machine, select Virutual MachineGuestInstall/Upgrade

VMware Tools.

(2) Executesetup64.exe.


27/27

NWD-162569

5. Install PNMSj application

Install the PNMSj application following the procedures mentioned in the PNMSj Installation Manual.

6. Configure PNMSj Server setting

Follow the procedures mentioned in the Server and Daemon setting manual.

PNMSj on Windows Virtual Server Installation Manual

Documents

Transcript of PNMSj on Windows Virtual Server Installation Manual