INTERNATIONAL CONGRESS ON GEOMATIC & SURVEYING ENGINEERING IXth NATIONAL CONGRESS TOP-CART’08
Plant Engineering & Geomatic Services Pvt Ltd2.imimg.com/data2/TD/TA/MY-/profile-pegs-opt.pdfPlant...
Transcript of Plant Engineering & Geomatic Services Pvt Ltd2.imimg.com/data2/TD/TA/MY-/profile-pegs-opt.pdfPlant...
Plant Engineering & Geomatic Services Pvt Ltd
Address Information
PEGS Pvt. Ltd.
Elcome House,
A-06, Sec-34, Gurgaon – 122002,
Haryana Phone: +91-124-4763302
Mail: [email protected]
Web: www.pegs.co.in
Services Rendered by PEGS
Laser scanning
Grid measurements Tie in Surveys
Installation control
Prefab control
3D laser scan modeling Field survey reports
Clash testing
Important Personnel
Ajay Seth Managing Director
Aneesh Seth Business Development Manager
Gourango Singha Operations/Project Manager
Amit Rohilla OPC Coordinator
Pravesh Kumar CATS/resource planning/logistics
Amit Kumar Cost control - Responsible
Vivek Singh 3D CAD operator
CH Praveena Senior 3D CAD operator
Jagdish Suthar 3D CAD Operator
Pankaj Kumar Senior survey Engineer (structure)
Shubham IT Administrator
Plant Engineering and Geomatic Services (PEGS) is a part of Elcome Group of Companies. PEGS is the
first company in India to provide laser scanning services to its client in India and abroad. In the past
few years PEGS have executed more than 70 projects in India and countries like Belgium, Cambodia,
Egypt, Malaysia, Morocco, UK, USA etc. Some of the key clients of PEGS are Larsen & Toubro Ltd, L&T Integrated Engineering Services, Ultramar Ltd, Ranhill Worley, British Gas, British Petroleum, Konkan
Railways, Wipro Ltd etc.
PEGS has established a state-of-the art 3D modeling center at Gurgaon in the National Capital Region. We specialize in capturing 3D digital data with the help of time-of-flight & phase based scanners. Apart
from laser scanning PEGS also conducts GPS/DGPS & Gyro surveys for various industry segments. We
have a dedicated team for carrying out laser scanning in the field and post processing the data into different formats as per the client need.
Software Expertise:
Industry Segments:
Refinery Offshore Heritage Ship Building
Tunnels Hydro Power Building Bridges
Mining Forensic Aero Space Highways
Service – Plant Engineering
Cyclone 3D Model PDMS Model Rendered Model
Clash Check Tie-In Reports As-Built Drawing
Services – Civil Engineering
DTM Model Contour Map Volume Calculation
Tunnel Profile
Our Engineers has undergone BOSEIT and EBS training from OPITO approved training institute and
most of them hold a Shell Safety & Health passport and can fly to offshore any time in any country.
In-house Equipments
Leica HDS 6200 Riegl LMS Z-420i Leica SmartStation
Leica Laser Tracker Leica GPS System 1200 Leica DISTO
Key Projects Executed by PEGS in the past
Plant Engineering
� 3D Laser Scanning of Maroc Phosphor Plant, Casablanca, Morocco
Client: Uhde India Ltd, Pune
� 3D Laser Scanning of P&G’s Plant at London, UK
Client: Larsen & Toubro Ltd, Vadodara
� 3D Laser Scanning of P&G’s Plant at Cairo, Egypt
Client: Larsen & Toubro Ltd, Vadodara
� 3D Laser Scanning of P&G’s Plant at Brussels, Belgium
Client: Larsen & Toubro Ltd, Vadodara
� 3D Laser Scanning of P&G.s Plant at Baddi, Himachal Pradesh
Client: Larsen & Toubro Ltd, Vadodara
� 3D Laser Scanning of P&G’s Plant at Mandideep, Madhya Pradesh Client: Larsen & Toubro Ltd, Vadodara
� 3D Laser Scanning of GM’s Saginaw Metal Casting Plant
Client: General Motors, Detroit, Michigan
� “As-Built” Studies of HS, HR & NLM Offshore Oil Platforms Client: Larsen & Toubro India Ltd, Mumbai.
� Clash Detection and Checking Installation Fit-ups for Compressor of Banduq Offshore Oil Platform
Client: Larsen & Toubro India Limited, Hazira, Gujarat
� Scanning of RAP5 & RAP6 at Rajasthan Atomic Power Station
Client: Nuclear Power Corporation of India Ltd, Mumbai
� “Clash Detection” & Checking Installation Fit-ups at Tapti Offshore Oil Platform
Client: British Gas & Exploration Pvt Ltd, Mumbai
� Scanning of Heat Exchangers to Check Installation Fit-ups for
Client: Fluor Canada Ltd & Ultramar Ltd, Canada
� Scanning of Tie-In points for clash checking and PDMS model upgrade for Shell, at Miri, Malaysia
Client: Ranhill Worley, Malaysia
� Scanning & 3D modeling of Procter & Gamble’s London Plant,
Client: Larsen & Toubro, India, Procter & Gamble, London, UK
� 3D Modeling of Golarchi, Tangri & Bukhari Oil facilities
Client: British Petroleum, Pakistan
Heritage
� 3D Laser Scanning survey of Stone Chariot & Varaha Temple at Hampi, Karnataka Client: KSCST, Bangalore
� 3D Laser Scanning of Chausanth Khamba, New Delhi
Client: Aga Khan Trust, New Delhi
� ”As-Built” survey of Ta Prohm Temple Complex in Siem Reap, Cambodia
Client: Archaeological Survey of India, Cambodia
� “As-Built” survey of Ajanta Caves for Geological Investigations
Client: Geological Survey of India and Archaeological Survey of India, New Delhi
� “As-Built” studies of Fatehpur Sikri
Client: Archaeological Survey of India, New Delhi
� “As-Built” studies of Qutab Minar
Client: Archaeological Survey of India, New Delhi
Civil Survey
� Topographic Studies of Anjikhad River Site for construction of Railway Bridge connecting Reasi and Katra
Client: Gammon India Ltd, Mumbai
� Topographic Studies of Runchu Dam Site and Power House at Teesta IV, Sikkim
Client: National Hydroelectric Power Corporation, Faridabad
� Topographic Survey of Goutham Khani Open Cast Mine, Client: Singareni Collieries Company Ltd, Khammam, Hyderabad
� Topographic Survey of Umred Open Cast Coal Mine
Client: Western Coal Fields Limited, Nagpur
� As-Built survey of T1 Tunnel at Udhampur, Udhampur, J&K.
Client: RITES Ltd, Gurgaon, Haryana
� Topographic Survey of 1050 Sq Km Area by Riegl 3D Laser Scanner at Indore, MP
Client: N.K.Buildcon
� Analysis of Dump failure by 3D Laser Scanning at Singrauli, MP
Client: Northern Coalfields Limited
� Establishing GPS Pillars at Kotputli for Six Lane Road construction on Delhi-Jaipur Highway
Client: Vishwa Surveying
� Establishing GPS Pillars for Topographic Survey of Hydro project Survey at Lachung, Sikkim.
Client: Lachung Hydro Power Pvt Ltd.
� Establishing GPS Pillars for Topographic Survey of Khardungla Pass at Khardungla Top, Leh
Client: Snow & Avalanche Studies Establishment, Chandigarh.
� Establishing GPS Pillars at Udhampur,J&K.
Client: RITES Ltd, Gurgaon, Haryana
Reverse Engineering projects
� Scanning of MIG -21 Aircraft for developing 2D as-built drawings and developing a 3D model for
performing CFD (Computer Fluid Dynamic test)
Client: Indian Airforce
3D Modeling Services PEGS has established a state-of-the art technology center for 3D modeling works with high end workstations and
dedicated server. All the employees are trained on software’s like Leica, Cyclone, AutoCad, Civil 3D etc to provide
deliverable in different formats. PEGS has executed several point cloud processing contracts with companies in
USA, Europe and other countries.
Sample Images from Past Projects:
FMCG
Automotive
Chemical
Offshore