PowerPoint Presentation

StageMaterials and SizesTools and processes Health and Safety Quality controlTechnical problems1Soft wood sizes 150x450 x 4My teacher cut out too pieces of soft for me using the circular saw.My teacher swore googles and ear protection.My teacher made sure they were perfect sizeNone2Ply wood 6mm 300x230 mmAgain my teacher used a circular saw to cut it out for me My teacher swore googles and ear protection.

My teacher made sure they were perfect size

None3Plywood 6mm 170x190 mmAgain my teacher used a circular saw to cut it out for me

My teacher swore googles and ear protection.

My teacher made sure they were perfect size

None44 x soft wood 150x450 mmMy teacher used the plane to down to 15mm using a planeMy teacher swore googles and ear protection.

My teacher made sure they were perfect size

none52 x softwood 150x450mmI used a biscuit hole cutter to cut 2 holes in the side of the my woods and use biscuits to stick them together and used wood glue to glue them together then clamped them to hold them in placeNone takenI wiped at access glue and put spare wood between the clamp and my wood to prevent any damageNone6After my wood has stuck together. I got my teacher to cut out 2 groves that were 15mm in length using the circular saw My teacher swore googles and ear protection.

I use a chisel to make my groove Is smooth and cut properly My groove when chiselling went a bit wrong it wasnt noticeable 6I got my other two pieces of soft woodI got sir using the circular saw again to cut 2 grooves for 6 mmMy teacher swore googles and ear protection.

I use a chisel to make my groove Is smooth and cut properly

None7All 3 of my soft wood piecesUsing wood glue I stuck 2 of my 15mm pieces of soft wood into the biscuit jointed woodNoneI wiped off access glueIt wasnt straight and I had to stick move into places8Ply wood size 170x170I got sir to cut out a square piece of plywoodMy teacher swore googles and ear protection.

None92 pieces of soft woodI used wood glue to slot the 170x170 mm plywood into the 6mm grooveNoneNoneNone102x 6mm plywood 300x260I used nailed to stick this on top and bottom of my product so far so it gives it a nice standNoneNoneI hammered into the wrong place and had to take the nail out114x 170x170 6mm plywoodI got sir to cut 4 pieces of plywood for me using the circular sawMy teacher swore googles and ear protection.

NoneMy teacher swore googles and ear protection.

128x 170x170 6mm plywood

I stuck them together to form a draw like structure using wood glueNoneI wiped off access glueI sanded it down so fit into the top part and bottom part of my product13Soft wood 200x170 with 2 6mm groovesI got sir to use the circular saw to cut out 2 pieces of soft wood and put grooves in themMy teacher swore googles and ear protection.

NoneNone14Soft wood 200x170 with 2 6mm grooves8x 170x170 6mm plywood

I stuck the front bits of my draws into the grooves to form like a door for my productNone wiped off access glue on it to make it look cleanNone15My drawsI added hands to the front of each one using screws and 2 little wooden handles to give it a professional lookNoneNonenoneMaking Plan1