1LIEBERT INTELLISLOT 485 CARDS

Product Specification/Installation SheetDescriptionLiebert IntelliSlot 485 cards provides Liebert SiteScan Web or Building Management Systems monitoring and control of your Liebert equipment.

The card delivers Modbus or the Emerson Protocol via the RS-485 port.

Liebert IntelliSlot 485 Card Liebert IntelliSlot 485 Card-SLiebert IntelliSlot 485 Card-LBDS Liebert IntelliSlot 485 Card-XLiebert IntelliSlot 485 Card-L

Compatibility With Other Emerson Network Power ProductsThe Liebert IntelliSlot 485 Card family, formerly the Liebert OpenComms line, includes:

Liebert IntelliSlot Card Part Number Compatible with:

Liebert IntelliSlot 485 Card OC-485 Liebert GXT Liebert GXT 6kVA&10kVA Liebert GXT3

Liebert GXT2U Liebert Hinet Liebert Nfinity

Liebert NX Liebert PowerSure PSI

(before July 2008)

Liebert IntelliSlot 485 Card-LBDS OC485-LBDS

Units with Liebert iCOM Firmware prior to PA1.04.033.STD: Liebert Challenger 3000 Liebert Challenger ITR Liebert CW

Liebert Deluxe System/3

Liebert DS

Liebert PeX Liebert XDC with

Liebert iCOM Liebert XDF

Liebert IntelliSlot 485 Card-L IS-485L

Liebert APM Liebert CRV

Liebert HPC Liebert HPM

Liebert XDP withLiebert iCOM

Units with Liebert iCOM Firmware PA1.04.033.STD or later: Liebert Challenger 3000 Liebert Challenger ITR Liebert CW

Liebert Deluxe System/3

Liebert DS

Liebert PeX Liebert XDC with

Liebert iCOM

Liebert IntelliSlot 485 Card-S IS-485SUnits with Liebert IntelliSlot support only: Liebert FDC Liebert FPC

Liebert PPC Liebert RDC

Liebert RX

Liebert IntelliSlot 485 Card-X IS-485X Liebert NXL (SA, SR, SN, MM, CD), Alber BDSU

Liebert IntelliSlot Card Communication ProtocolsThe 485 cards support the following protocols:

Liebert IntelliSlot Card Part Number

Communication Protocol

MODBUS/485 IGM

Liebert IntelliSlot 485 Card OC-485 Liebert IntelliSlot 485 Card-LBDS OC485-LBDS Liebert IntelliSlot 485 Card-L IS-485L Liebert IntelliSlot 485 Card-S IS-485S Liebert IntelliSlot 485 Card-X IS-485X

DTE/DB9F serial port for configuration (requires null-modem connection)

RS-485 (for Modbus)

ORRS-422 (for IGM)Depends on configuration by user

2 2007 Liebert CorporationAll rights reserved throughout the world. Specifications subject to change without notice.

Liebert is a registered trademark of Liebert Corporation. All names referred to are trademarks or registered trademarks of their respective owners.

SL-28160_REV8_08-13

Liebert Corporation1050 Dearborn DriveP.O. Box 29186Columbus, OH 43229

Telephone: 1-800-877-9222Facsimile: 1-614-841-6022www.liebert.com

Wiring Specifications

Dimensions

Specifications

Connection Supported Wire Type Max. Wire Length

RS-422 (IGM) 18-22 AWG Stranded & Shielded18 AWG recommendedNon Plenum - Belden 9461Plenum - Belden 88761 1000 ft. (300m)

RS-485 (Modbus) 18-22 AWG Stranded & Shielded18 AWG recommendedNon Plenum - Belden 9461Plenum - Belden 88761 3000 ft. (915m)

RS-232DB-9F Connector

Null Modem CableDTE Null Modem Cable

Null Modem CableDTE Null Modem Cable 50 ft. (15.3m)

Power Requirements

AC Inputs 18 - 24 VAC; 50/60 HzDC Inputs 12 - 36VDCPower Consumption 6VA maximum (1.75W)

Dimensions - W x D x H: in. (mm) 3 x 5-1/4 x 1-1/2 (76 x 134 x 38)

WeightNet - oz. (kg) 7 (0.2)Shipping - lb. (kg) 1.3 (0.6)

Ambient Operating Environment, F (C) 32 to 104 (0 to 40); 10% to 90% RH (non-condensing)Ambient Storage Temperature, F (C) -4 to 140 (-20 to 60)Protection SELV Isolated User Connections, Watchdog Timer Circuitry

CommunicationPorts

Service Terminal (RS-232) DB9F, DTEModbus (RS-485) 2-Position Terminal BlockIGM (RS-422) 2-Position Terminal Block

RS485 RS232

- +

2-3/8"(60.3mm)

4-3/4"(121mm)

RS-232 port

1/2" (11mm)

1-1/2"(38mm)

3"(76mm)

FaceplateTOP VIEW

FRONT VIEW

DescriptionCompatibility With Other Emerson Network Power ProductsLiebert IntelliSlot Card Communication ProtocolsWiring SpecificationsDimensionsSpecifications