PISCO and ATCA Follow-on for SPT Clusters Antony A. Stark Smithsonian Astrophysical Observatory 18...
-
date post
18-Dec-2015 -
Category
Documents
-
view
218 -
download
2
Transcript of PISCO and ATCA Follow-on for SPT Clusters Antony A. Stark Smithsonian Astrophysical Observatory 18...
PISCO and ATCA Follow-on for SPT Clusters
Antony A. Stark
Smithsonian Astrophysical Observatory
18 May 2007
Parallel Imager for Southern Cosmology Observations (PISCO):
A Multiband Imager for Magellan
Antony Stark Antony Stark Smithsonian PISmithsonian PI
Christopher StubbsChristopher Stubbs Harvard PIHarvard PI
Matt HolmanMatt Holman Smithsonian Smithsonian — Planets, exoplanets— Planets, exoplanets
John GearyJohn Geary CCD electronicsCCD electronics
Andy SzentgyorgyiAndy Szentgyorgyi Engineering consultantEngineering consultant
Steve AmatoSteve Amato CCD electronicsCCD electronics
Will HighWill High Thesis project, Harvard PhysicsThesis project, Harvard Physics
Andrea LoehrAndrea Loehr PostDoc PostDoc — — Observing algorithmObserving algorithm
James BattatJames Battat grad student, SAOgrad student, SAO
Armin RestArmin Rest PostDoc PostDoc — — Photo-z SoftwarePhoto-z Software
Steve SansoneSteve Sansone LPPC machine shopLPPC machine shop
Antony Stark Antony Stark Smithsonian PISmithsonian PI
Christopher StubbsChristopher Stubbs Harvard PIHarvard PI
Matt HolmanMatt Holman Smithsonian Smithsonian — Planets, exoplanets— Planets, exoplanets
John GearyJohn Geary CCD electronicsCCD electronics
Andy SzentgyorgyiAndy Szentgyorgyi Engineering consultantEngineering consultant
Steve AmatoSteve Amato CCD electronicsCCD electronics
Will HighWill High Thesis project, Harvard PhysicsThesis project, Harvard Physics
Andrea LoehrAndrea Loehr PostDoc PostDoc — — Observing algorithmObserving algorithm
James BattatJames Battat grad student, SAOgrad student, SAO
Armin RestArmin Rest PostDoc PostDoc — — Photo-z SoftwarePhoto-z Software
Steve SansoneSteve Sansone LPPC machine shopLPPC machine shop
PISCO System Characteristics
Optical Passbands g, r, i, z simultaneous imaging
Plate Scale 0.12 arcsec per binned 30 micron pixel
Field of View 5 arcmin × 5 arcmin (corresponds to 1.1 Mpc at z=0.3)
Detectors Two Lincoln Labs 2K x 4K CCDs per focal planeRead noise < 3 e rms (cf. Stubbs talk)Optimal AR coating for each passbandDeep depletion CCDs for i, z bands
Readout time < 10 seconds
80% encircled energy radius < 0.2 arcseconds (seeing limited)
Optical surfaces All spherical, 9 inch diameter or smaller lenses.
Angled Dichroic Optical Layout
Optical Design of the PISCO as of September 2006. In the region between the collimator and the cameras, the beam is now accurately collimated, with a maximum angular deviation for any ray in any field ≈ 3´. This eliminates ghosting by the dichroics and filters, and greatly reduces the alignment requirements for the cameras. The r focus now no longer requires a fold mirror, and is sufficiently far from the small guider housing (at left) so as not to be a problem (check this with F. Perez!). Focus is now telecentric.
ADC Operation
• Can use PISCO on Clay telescope
• Consists of two rotating cylindrical prisms, – 1 cm thick– airspaced, multi-coated
• Initial scientific mission can be achieved without ADC
• ADC can be removed with re-focus
Dichroic in Cube Optical Layout
Alternate Optical Design of PISCO. The dichroics are embedded into cubes of fused silica, so that there is no difference in dielectric constant on either side of the dichroic. This allows the dichroics to be used at 45º. The dichroics are placed in the telecentric beam from the focal reducer, so all field positions have identical ranges of angle of incidence at the dichroics. The overall length of the instrument is reduced to 1.6 meters, and all CCDs are in a single, medium-sized dewar.
Controlling Systematics
• Our design is readily baffled• Can use both field stop and pupil stop• Suppresses stray and scattered light• Better flatfielding
• Single common shutter near pupil• Reduced shutter artifacts• Single atmospheric transmission function
• Flux ratios with a single pointing and 2-3 exposures, under all conditions!
• Even with patchy cloud cover, get good colors.
• We can measure filter transmission functions with high accuracy.
Electronics are done…
• We have already taken images in the lab with full control-to-image software.
• Readout noise is OK (3 electrons).
• Readout speed is OK ( < 8 seconds).
Initial detector tests look favorable
Tested 2 3K x 6K 10 micron high-rho devices in Univ of Hawaii test system.
Read noise
Dark current vs. temperature
CTE via Fe55 xrays
Gain via Fe55 xrays
Analysis Software: We’ll build upon SuperMacho/ESSENCE image analysis
pipeline
Battle tested over past 6 years at CTIO for SM and ESSENCE surveys.– Flatten with dome flats, fringe flat and sky flats
– Astrometric WCS registration, warp to fixed plate scale
– Photometry to 1%
– CVS code management, easy to add new modules
– Parallel implementation, Condor on Linux boxes
– Robust and self-tracking
– Honed on crowded fields
– Need to add (1) cluster photo-z module, and (2) SQL database
– Armin Rest, pipemeister, coming to CfA in Spring 2007.
Flow diagram for real-time cluster redshift analysis pipeline
We expect that within 30 seconds of acquiring the first image, we will have produce an appraisal of whether the second 30 image will add enough integration time to obtain a cluster photometric redshift at the requisite SNR. We have in hand the middleware and pipeline structure for this, from the ESSENCE and SuperMacho surveys. We are missing only the final segment, namely the redshift estimator, which we will develop in parallel with the construction of the hardware.
Tightly coupled software/observing
Take Image 1Take Image 130 sec 30 sec
Analyze Image: Analyze Image: flatten, WCS, sextractor flatten, WCS, sextractor Galactic reddening corr.Galactic reddening corr.
Produce z, Produce z, zz
OK? OK?
OffsetOffsetTake Image 2Take Image 2
30 sec 30 sec
Slew to next targetSlew to next target
Offset if appropriateOffset if appropriate
More imagesMore images
Photometric Redshift PrincipleThe plots show how the observer-frame spectrum of an early-type galaxy depends upon its redshift. The redshifts are indicated in the upper left corner of each panel. The flux ratios between the g, r, i, and z bands is a good indicator of galaxy redshift, as the 4000 Å break moves across the spectrum. We will develop real-time analysis code that will produce an initial cluster redshift result within 30 seconds of the acquisition of an image.
Photometric Redshift for Clusters
• Photo-z’s for individual galaxies tend to have scatter of z/(1+z)~0.03, but with a few “catastrophic” outliers.
• Combination of morphology, magnitude, color and location can be used to establish cluster’s redshift.
• Robust statistics can be used to eliminate “outliers”.
Uniform exposure times for clustersRedshif
t zg t_g r t_r i t_i z t_z
0.1 18.5 5 18.0 5 17.5 5 17.0 5
0.2 20.5 5 19.5 5 19.0 5 18.5 5
0.4 23.0 35 21.2 5 20.5 5 20.0 5
0.6 24.5 550 23.0 90 22.0 60 21.2 30
0.8 26.2 12000 24.2 780 23.0 320 22.1 160
1.0 - 25.0 3420 24.0 2000 23 870
Magnitudes in the four filter bands (shaded) for L*/2 early type galaxies, and exposure times (in seconds, unshaded) to achieve SNR=10, as a function of redshift. The table assumes galaxy flux integrated in a 2.2 arcsec diameter aperture, in seeing of 0.8 arcsec at an airmass of 1.2 in dark time. The numbers assume deep depletion detectors in the z and i bands, like those for the SMI. The exposure time needed to achieve SNR=10 is reasonably well matched across the bands. A minimum exposure time is 5 sec.
One night to obtain 115 cluster redshifts at z < 1.5 z range N clusters N * exposure time (seconds)
0.0 – 0.2 15 15 * 60 = 900
0.2 – 0.4 30 30 * 60 = 1800
0.4 – 0.6 30 30 * 60 = 1800
0.6 – 0.8 15 15 * 200 = 3000
0.8 – 1.0 10 10 * 800 = 8000
1.0 – 1.2 9
1.2 – 1.4 4 15 * 1000 = 15000
1.4 – 1.6 2
Totals 4 hours for 100 clusters to z=14.2 add’l hrs for 15 at z > 1
The time needed to obtain 115 cluster redshifts, in good conditions, is 8.2 hours. It will not be possible to obtain redshifts for the ~10% of clusters with redshift z > 1.5; these will be flagged to obtain redshifts using other instruments.
Order of detection by PISCO
8 bright red galaxies detected first (green circles)
Black-circled detected next
Blue dots are cluster galaxies
Black dots are foreground
Science Opportunities• Supernova followup observations
• Type Ia and type II Sne as cosmological probes• Requires multiband images, multiple epochs
• Photometric redshifts of clusters• 4 band imaging over 5 arcmin field
• Transient followup• Evolution of SED for GRBs• Microlensing light curves
• Planetary occultations• Multiband data useful for discrimination
• Followup camera for PanSTARRS/LSST
Masses and radii of transiting extrasolar planets
The dashed lines correspond to loci of constant mean density. The symbols indicate the nine known transiting planets, along with Jupiter and Saturn. Two symbols are shown for OGLE-TR-10b. In green is the result based on a fit to the OGLE photometry and available radial velocities (Konacki et al. 2005). In blue is the Holman et al. (2005) result, based on a simultaneous fit to Magellan photometry and the same radial velocity measurements.
Project timeline Major Review of Hardware Design 12/13/06
Optical System Design Completed 1/30/07 (but…new idea)
Optics Delivery 10/15/07
Software design complete 10/1/07
Finish assembly of all hardware subsystems 12/1/07
Software complete, integrated 1/1/08
Full integration on lab bench 2/1/08
Target shipping date 2/08
Shakedown run on Magellan 3/08
First SPT cluster observations 3/08
The construction of our instrument is timed to allow us to be ready for pipelined observations of SPT-SZ clusters in early 2008.
PISCO Current Status
• Some observing time granted in 4th quarter 2007 for photo-z observations of clusters– What should we observe? Need to know soon.
• Funds are available from Smithsonian to complete PISCO construction
• Successfully obtained private foundation grant for a PostDoc
• Proposals pending at NSF, DOE for ongoing support
Australia Telescope Compact Array (ATCA) observations of SPT clusters
Antony Stark Antony Stark Smithsonian Astro ObsSmithsonian Astro Obs
Wilfred WalshWilfred Walsh U. New South Wales Asia U. New South Wales Asia
Joe MohrJoe Mohr U. IllinoisU. Illinois
Tom CrawfordTom Crawford U. ChicagoU. Chicago
Antony Stark Antony Stark Smithsonian Astro ObsSmithsonian Astro Obs
Wilfred WalshWilfred Walsh U. New South Wales Asia U. New South Wales Asia
Joe MohrJoe Mohr U. IllinoisU. Illinois
Tom CrawfordTom Crawford U. ChicagoU. Chicago
Relevance to SPT Cluster Survey
• SPT system is around 100 Jy/K• SPT-SZ survey will be 10 μK rms per beam• Point continuum sources that are 1 mJy or brighter
will make a significant contribution to the data, and possibly affect the detection of clusters and their derived parameters.
• The number of such sources in SPT bands is poorly known.
• With the ATCA, we can actually search for and detect such sources in SPT clusters.
Pilot Study Completed
• We were actually awarded a significant amount of observing time on ATCA
• “Extragalactic” time slot is undersubscribed, and not too hard to get observing time
• We observed 24 X-ray selected moderate redshift clusters (Mullis et al. 2003) in redshift range 0.05 < z < 0.65
• Observe at 18 GHz, because of ATCA sensitivity and map area; possible follow-up at 90 GHz
• Detected one source at ~ 2 mJy at 18 GHz• Our sensitivity was primarily limited by phase stability—we
will need good weather
Current Status
• Proposal in to NSF AST for travel and publication expenses—no decision yet.
• Additional proposals submitted for observing time.