PIPELINE LIFTING - Connector Subsea
2
CONNECTOR SUBSEA SOLUTIONS Head office: Kokstadflaten 17, 5257 Kokstad, Norway Locations in: Brazil, UK, Croatia & Bosnia www.connectorsubsea.com // [email protected] +47 99 70 11 11 // connector-subsea-solutions Product ID: 20502-0310-01 // Page: 1/2 PRODUCT GROUP PIPELINE REPAIR & TIE-IN PIPELINE LIFTING & HANDLING FRAME PRODUCT DESCRIPTION Pipeline Lifting & Handling Frames facilitate inspection, free span correction, maintenance and repair of subsea pipelines. Incorporating a modular foot design for multiple seabed conditions and inde- pendent leg length configuration, the frame can provide secure, stable and con- trolled interface with the pipeline, regardless of the location, water depth or sea current. Light weight and easy to handle, the entire Pipeline Lifting & Handling Frame can fold and pack into a standard 10ft shipping container. This makes it an applica- ble option regardless of vessel size or location. With over 1000 subsea operations completed these tools are proven to be both robust and reliable, while also providing an increased level of safety and control when manipulating subsea pipelines. These tools are available to rent as standard units or can be sold as bespoke engineered solutions to your specific application requirements. CAPACITIES Pipeline size 4-24 in Lifting capacity (SWL) 25 t Lifting height 2100 mm Reach below seabed 2000 mm Transversal travel ± 500 mm (from centre) Allowable slope for operation 15 deg Water depth (m) 3000 m DIMENSIONS & WEIGHT Unfolded dimensions (HxWxD) 2900 x 4268 x 5102mm Folded dimensions (HxWxD) 2900 x 2352 x 3053mm Mass of tool 5000 kg Weight of tool in air 49 050 N (5000 kgf) Weight of tool in water 42 674 N (4350 kgf) 2 0 4 8 , 5 1000 5 1 0 2 2 0 4 6 3 0 5 3 4268 2 8 4 8 , 5 ( 5 0 4 ) 20in 3668 CoG (CoB) Fully opened cylinders ( 1 8 8 7 )
Transcript of PIPELINE LIFTING - Connector Subsea
CONNECTOR SUBSEA SOLUTIONSHead office: Kokstadflaten 17, 5257 Kokstad, NorwayLocations in: Brazil, UK, Croatia & Bosnia
www.connectorsubsea.com // [email protected]
+47 99 70 11 11 // connector-subsea-solutions
Product ID: 20502-0310-01 // Page: 1/2
PRODUCT GROUP
PIPELINE REPAIR & TIE-IN
PIPELINE LIFTING & HANDLING FRAME
PRODUCT DESCRIPTION
Pipeline Lifting & Handling Frames facilitate inspection, free span correction, maintenance and repair of subsea pipelines. Incorporating a modular foot design for multiple seabed conditions and inde-pendent leg length configuration, the frame can provide secure, stable and con-trolled interface with the pipeline, regardless of the location, water depth or sea current.Light weight and easy to handle, the entire Pipeline Lifting & Handling Frame can fold and pack into a standard 10ft shipping container. This makes it an applica-ble option regardless of vessel size or location. With over 1000 subsea operations completed these tools are proven to be both robust and reliable, while also providing an increased level of safety and control when manipulating subsea pipelines.These tools are available to rent as standard units or can be sold as bespoke engineered solutions to your specific application requirements.
CAPACITIES
Pipeline size 4-24 in
Lifting capacity (SWL) 25 t
Lifting height 2100 mm
Reach below seabed 2000 mm
Transversal travel ± 500 mm (from centre)
Allowable slope for operation 15 deg
Water depth (m) 3000 m
DIMENSIONS & WEIGHT
Unfolded dimensions (HxWxD) 2900 x 4268 x 5102mm
Folded dimensions (HxWxD) 2900 x 2352 x 3053mm
Mass of tool 5000 kg
Weight of tool in air 49 050 N (5000 kgf)
Weight of tool in water 42 674 N (4350 kgf)
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
DWG REV:SCALE:
DWG No.:DESCRIPTION:
TITLE:
SHEET:
PROJECT:
WEIGHT:
This drawing is the property of CONNECTOR SUBSEA SOLUTIONS. It must not be copied, altered or distribued in any way without prior consent from the company!
PROJECTION:
N/A
SN-18512 - PLT Development
PIPELINE LIFTING TOOLSWL 25 T
D00021224
2 of 4 61 :25FORMAT:
A3
Part No.:
PN00022554
DBBDRAWN BY:
DBBCREATED BY:
GADRAWING TYPE:
2048
,5
1000
5102
2046
3053
4268
2848
,5
(504
)
20in
3668
CoG(CoB)
Fully opened cylinders
(188
7)
CONNECTOR SUBSEA SOLUTIONSHead office: Kokstadflaten 17, 5257 Kokstad, NorwayLocations in: Brazil, UK, Croatia & Bosnia
www.connectorsubsea.com // [email protected]
+47 99 70 11 11 // connector-subsea-solutions
Product ID: 20502-0310-01 // Page: 2/2
PIPELINE LIFTING & HANDLING FRAMEPIPELINE REPAIR & TIE-IN
INTERFACES
Diver Operation Powered through hydraulic interface
ROV operated Compliant with CSS ROV skid and topside control system
ROV Interface Specification 4 Line stab and Receptacle, Ø35, 10k, API 17D (x4)
Max. working pressure 207 bar /3000 psi
Hydraulic oil Shell Tellus S2 22/32 (typical) NAS8/ISO 4406 19/17/14
Installation Deck Crane & WROV
ADDITIONAL INFO
Design codes DNVGL 2.7-3 Portable offshore units DNVGL-OS-C101 Design of offshore steel structures
Operation Class DNV 2.7-3 R45-Sxx
Portable Offshore Unit Type A
Coating NORSOK 7B, Marine epoxy paint system
Cathodic protection Yes
Packing 10 ft offshore container, open top required
02 // Factory acceptance testing through remote interface
03 // Tool folded and packed into standard 10ft shipping container ready for transport or storage
05 // ROV footage of subsea operation
04 // Offshore mobilisation and deployment
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
DWG REV:SCALE:
DWG No.:DESCRIPTION:
TITLE:
SHEET:
PROJECT:
WEIGHT:
This drawing is the property of CONNECTOR SUBSEA SOLUTIONS. It must not be copied, altered or distribued in any way without prior consent from the company!
PROJECTION:
N/A
SN-18512 - PLT Development
PIPELINE LIFTING TOOLSWL 25 T
D00021224
3 of 4 61 :15FORMAT:
A3
Part No.:
PN00022554
DBBDRAWN BY:
DBBCREATED BY:
GADRAWING TYPE:
2091
3053
3053
2352
CoG CoG
(186
3)
(22)
Folded position for packing and shipping
01 // Pipeline Lifting & Handling Frame mudmat for soft seabed conditions
