A2ZENG.NO

Mongstad Norway

A2ZENG SERVICE CATALOGUE Office address: Litlås 21, N-5954 Mongstad, Norway Post address: Leirvågsvegen, 5953 Fonnes, Norway Phone: +47-41393185 Email: os@a2zeng.no Webpage: A2ZENG.NO

Document Number

18101601

Rev. Date Description Made by Checked

by Approved by

00 18.10.2016 ISSUED FOR INFORMATION

AH OS AH

TABLE OF CONTENTS Introduction .............................................................................................................................. 3 Lifting Tools and Lifting equipment ........................................................................................... 4 Pressure vessels and pressure tools ........................................................................................ 8 Storage tanks ........................................................................................................................... 9 Process piping, Pressure piping, power piping ....................................................................... 11 Onshore structures ................................................................................................................. 12 Offshore steel structures ........................................................................................................ 14 Subsea structures .................................................................................................................. 17 Other Projects ........................................................................................................................ 19

INTRODUCTION

A2ZENG is specialized in documentation and 3rd party inspection and approval of the industrial products according to design standards. The products are divided to the following groups:

• Lifting tools and equipment • Pressure vessels and pressure tools • Storage tanks • Process piping, pressure piping, power piping • Onshore structures • Offshore structures • Subsea structures

The products are from the following materials:

Carbon steel and alloy steel

Light metals alloys, e.g. Aluminium alloy, Titanium alloy and Magnesium alloy

Laminated reinforced composite The documentations and documentations approvals includes:

• Fabrications drawings • Design or calculations reports • Approval of certificates • 3rd party check for as built certificates for products • Weld inspection and pressure testing

A2ZENG can provide the documents or approves the existing documents* according to the customer need. In the followings, a list of products and related design standard for each product is presented. * This may need modification of the design.

LIFTING TOOLS AND LIFTING EQUIPMENT

Design standards related to the lifting tools are listed in the followings:

• All DNV and NORSOK standards related to lifting • Machine directive no. 522 and no. 544 for onshore lifting • DNV 2.7-3: Portable Offshore Units • DNV 2.7-1: Offshore Containers • DNV 2.22: Lifting Appliances • NORSOK R-002: Lifting Equipment • DNV-OS-E101: Drilling Plant • FOR 1978-01-17: Regulations concerning cargo handling appliances in ships • DNV Rules for Planning and Execution of Marin Operations • DNV-OS-H205: Lifting Operations (VMO Standard - Part 2-5) • DNV-OS-H202: Sea transport operations (VMO Standard - Part 2-2) • DNV-OS-H203: Transit and Positioning of Offshore Units • Roles for Planning and Executions of Marine Operations • NS-EN 13001-1: Cranes - General design - Part 1: General principles and

requirements • NS-EN 13001-2: Crane safety - General design - Part 2: Load actions • EN 13155: Cranes - Safety - Non-fixed load lifting attachments • NS5514 Cranes and lifting appliances - Steel structures - Design rules

Some of the lifting tools that can be documented are shown in the following table:

Lifting lugs for onshore, offshore or subsea liftings

Lifting beams (spreader beams) for onshore, offshore or subsea liftings

Lifting frames for onshore, offshore or subsea liftings

Lifting baskets for onshore, offshore or subsea liftings

Lifting plates for onshore, offshore or subsea liftings

Lifting flange for onshore, offshore or subsea liftings

Winch for onshore, offshore or subsea liftings

Onshore and offshore cranes

Onshore and offshore cranes installation

Storage tank, pipe and riser lifting

Other lifting tools

PRESSURE VESSELS AND PRESSURE TOOLS

Design standards related to the pressure vessels and pressure tools are listed in the followings:

• ASME Boiler and Pressure Vessel Code, Section VIII, Division 1 and 2 • ASME Boiler and Pressure Vessel Code, Section X • EN13445 Unfired pressure vessel code • ASME B31.3 ASME code for Pressure piping, process piping

Some of the products that can be documented are shown in the following table:

Subsea vessels or vessels with external pressure

Pressure vessels with internal pressure

Pressure tools

Pressure testing tools

STORAGE TANKS

Design standards related to the storage tanks are listed in the followings:

• ASME Boiler and Pressure Vessel Code, Section VIII, Division 1 and 2 • EN13445 Unfired pressure vessel code • ASME B31.3 ASME code for Pressure piping, process piping • EN 13480 Metallic industrial piping

Some of the products that can be documented are shown in the following table:

Vertical and horizontal storage tanks

Cubical storage tanks

Protection frame for tanks

Lifting of storage tanks

PROCESS PIPING, PRESSURE PIPING, POWER PIPING

Design standards related to the piping are listed in the followings:

• ASME B31.3 ASME code for Pressure piping, process piping • EN 13480 Metallic industrial piping • ASME Boiler and Pressure Vessel Code, Section VIII, Division 1 and 2 • EN13445 Unfired pressure vessel code •

Some of the products that can be documented are shown in the following table:

Pipe spools

High pressurized and high temperature piping

Pipe supports

ONSHORE STRUCTURES

Design standards related to the onshore steel structure are listed in the followings:

• Eurocode 3 (EN 1993-1): Design of steel structures • Eurocode 5 (EN 1995-1): Design of timber structures • Eurocode 5 (EN 1995-1): Design of aluminum structures • NORSOK N-001 Structure design • NORSOK N-004 Design of steel structure

Some of the structures that can be documented are shown in the following table:

Industrial structures

Pipe racks and pipe supports

Towers

Test towers

OFFSHORE STEEL STRUCTURES

Design standards related to the offshore steel structure are listed in the followings:

• All DNV and NORSOK standards related to Design of offshore structures • NORSOK N-001 Structure design • NORSOK N-004 Design of steel structure • DNV-OS-H101: Marine Operations, General - Rules and standards • DNV-OS-H102: Marine Operations, Design and Fabrication • DNV-OS-H206: Loadout, transport and installation of subsea objects (VMO Standard

- Part 2-6) • DNV-RP-C203: Fatigue Design of Offshore Structures • Machine directive no. 522 and no. 544 for onshore lifting • DNV 2.7-3: Portable Offshore Units • DNV 2.22: Lifting Appliances • DNV-OS-E101: Drilling Plant • DNV Rules for Planning and Execution of Marin Operations • DNV-OS-H205: Lifting Operations (VMO Standard - Part 2-5) • DNV-OS-H202: Sea transport operations (VMO Standard - Part 2-2) • DNV-OS-H203: Transit and Positioning of Offshore Units

Some of the structures that can be documented are shown in the following table:

Offshore structures

Skids

Access ways

Towers

Gangways

Tank farm support

SUBSEA STRUCTURES

Design standards related to subsea structure are listed in the followings:

• All DNV and NORSOK standards related to design of subsea structures • NORSOK N-001 Structure design • NORSOK N-004 Design of steel structure • DNV-OS-H101: Marine Operations, General - Rules and standards • DNV-OS-H102: Marine Operations, Design and Fabrication • DNV-OS-H206: Loadout, transport and installation of subsea objects (VMO Standard

- Part 2-6) • DNV-RP-C203: Fatigue Design of Offshore Structures • Machine directive no. 522 and no. 544 for onshore lifting • DNV 2.7-3: Portable Offshore Units • DNV 2.22: Lifting Appliances • DNV-OS-E101: Drilling Plant • DNV Rules for Planning and Execution of Marin Operations • DNV-OS-H205: Lifting Operations (VMO Standard - Part 2-5) • DNV-OS-H202: Sea transport operations (VMO Standard - Part 2-2) • DNV-OS-H203: Transit and Positioning of Offshore Units • DNV-OS-F101: Submarine Pipeline Systems - Rules and standards • ASME Boiler and Pressure Vessel Code, Section VIII, Division 1 and 2 (external

pressure) • EN13445 Unfired pressure vessel code (external pressure)

Some of the structures that can be documented are shown in the following table:

Subsea structures

Subsea vessels

Lifting and installation of subsea structures

Mud-mats

OTHER PROJECTS

Other than documentation, A2ZENG can provide following services also:

Computational Analysis (FEA/CFD)

Project management from concept design to production

Reverse engineering

Fabrication