Pipelife Soluforce NL
-
Upload
pipelife-international-gmbh -
Category
Documents
-
view
229 -
download
1
description
Transcript of Pipelife Soluforce NL
HIGH PRESSURE PLASTIC PIPE SYSTEM
S
FLEXIBLE THINKING
2
SOLUFORCE® BENEFITS
SILOAMSPRINGS
ZARAGOZA
CHÂTEAUROUX
GAILLON
KALMTHOUT
ENKHUIZEN
CORK
STATHELL
SURNADAL
LJUNG
ÖLSREMMA
GDANSK
RADOM
OTROKOVICE
VIENNADEBRECEN
KARLOVACMIERCUREA CIUC
ISTAMBUL
THIVA
TALLINN
KAAVI
UTAJÄRVI
II
HAPARANDA
ZHUKOV
BAD ZWISHENAHN
Soluforce® rTP (reinforced Plastic Pipe) has been manufactured and used extensively since the year 2000. It is estimated that over a thousand kilometers worldwide is currently in operation.
The concept of a completely non corrosive pipe system for high pressure hydrocarbon applications came about through the demand from oil companies who proactively participated in the development and qualification of rTP. In 1998 a JIP (Joint Industrial Project) which brought together manufacturers, users (such as Saudi Aramco, Petrobras, Shell, BP) and testing institutes was created. out of the JIP was developed an API standard (API rP 15S) for rTP in 2006.
Soluforce® rTP is a complete non metallic piping system. It is qualified for Water, Hydrocarbons and Gas applications.
Manufactured by PIPelIfe in enkhuizen, The Netherlands, Soluforce® rTP is supplied on disposable wooden reels which may be easily transported by either road or ship.
Soluforce® rTP comes with a complete fitting system for its pipes. It provides welding equipment and certified welders for installation wherever the customer requires.
Soluforce® is a business unit within the PIPelIfe International group of companies and benefits from belonging to one of the world’s largest plastic pipe manufacturers.
Transportable
Robust
3
SILOAMSPRINGS
ZARAGOZA
CHÂTEAUROUX
GAILLON
KALMTHOUT
ENKHUIZEN
CORK
STATHELL
SURNADAL
LJUNG
ÖLSREMMA
GDANSK
RADOM
OTROKOVICE
VIENNADEBRECEN
KARLOVACMIERCUREA CIUC
ISTAMBUL
THIVA
TALLINN
KAAVI
UTAJÄRVI
II
HAPARANDA
ZHUKOV
BAD ZWISHENAHN
PiPelife international G.m.b.H. is a global player in the manufacture of plastic pipe systems with offices and production facilities in over 25 countries.
Benefits Pages 4 - 7Water Pages 8-11Hydrocarbons Pages 12-15Gas Pages 16-19Fittings Pages 20-23Connection System Pages 24-31Welding (Page 31)
Offshore Pages 32-35
SUMMARY
Deployment
4
SOLUFORCE® BENEFITS
Solves corrosion problems
Maintenance Free
Very fast Installation
Design life up to 50 years
SolufoRce® RTP deployed (floating) during an offshore installation.
5
SOLUFORCE® BENEFITS
No Scaling - No erosion
Very robust400 meters length per coil
Re-Usable
SolufoRce® RTP installed in the desert
6
SOLUFORCE®
STaNdaRdS, TESTINg aNd qUaLIFICaTIONS
Standards
Soluforce® complies with the following standards:
Oilfield service:
API RP 15S “Qualification of Spoolable reinforced Plastic linepipe” (Soluforce® light, and Soluforce® classic pipe system)
API 17J “ Specification for unbonded flexible Pipe” (Soluforce® Heavy, pipe body)
Gas distribution and transport:
ISO TS 18226 “reinforced Thermoplastic Piping Systems for Gaseous fuels” (Soluforce® light and Soluforce® classic, gas transport & distribution)
DVGW VP 642 “faserverstärkte Pe-rohre (rTP) und zugehörige Verbinder für Gasleitungen mit Betreibsdrücken über 16 Bar” (German Standard for gas distribution and transport, Soluforce® light and Soluforce® classic)
Soluforce® has a proven track record in the oil and gas industry, and has been used since 2000 for different applications, including oil and gas linepipe, water injectionpipe, water transportation, and gas distribution and transport.
Soluforce® maintains the highest quality levels with regard to the design, manufacturing and testing of their products, according to, or exceeding the requirements in international standards.
Qualification and Certification
The design, testing and qualification of Soluforce® is verified according to the applicable standards by ISo accredited independent institutes. for oilfield applications: “Det Norske Veritas” (DNV). for gas distribution and transport: rWTÜV.
QA/QC System
Soluforce® is developed, manufactured and marketed under ISo9001 QA/Qc system, approved by KIWA.
7
SOLUFORCE®
dESIgN aNd RELIaBILITy
The reliability of Soluforce® is guaranteed by extensive laboratory testing and long term field experience.
To assess the long-term strength, Soluforce® is pressure tested for a period of 10,000 hours (more than one year), according to internationally accepted standards. one of the most important test criteria is that the fitting system should be stronger than the pipe itself.
Next to corrosion, third party interference is the major cause of pipeline failure. Soluforce® light and classic, being completely non-metallic, including the fitting system, offer the ultimate in absolute corrosion resistance. The resistance to third party interference, earth quakes and landslides has been verified in the laboratory by falling weight impact testing, axial load and bending testing under supervision of major oil companies. In-field impact testing with digging machines has shown equal or better performance than steel pipe.
Soluforce® is field-proven since 2000, when the first flowlines were installed in the Middle east desert. These pipes have been in service since without any interruption. Meanwhile Soluforce® has been installed worldwide onshore and offshore at major oil and gas companies. No failure in service has been reported.
Axial force test.
Squeeze test
Bending test
elevated temperature testingin a hot water bath.
Test preparation
8
SOLUFORCE® WaTER
HIGH PRESSUREPLASTIC PIPE SYSTEMSFOR WATER
9
SOLUFORCE® LIGHT : L450 - L540
A synthetic fibre tape reinforcement for lower pressure applications.- effluent water- Water supply
SOLUFORCE® CLASSIC : M480 - M570
An synthetic fibre tape reinforcement for medium pressure applications.- effluent water- Saline water- Water injection
SOLUFORCE® HEAVY : H415 - H515
A high strength steel wire reinforcement for high pressure water applications.- High pressure water injection
SOLUFORCE® WaTER
SoLuForcE® classic and Light are resistant to ALL chemicals involved in water injection, also in extremely sour environments, including: • (strong) inorganic acids like HCl, H2SO4 • (strong) alkaline materials, including NaOH, KOH, and NH3 solutions • CO2 in any concentration/pressure • H2S in any concentration/pressure • Anti-corrosion additives • Mineral salts • Hydrocarbons of any composition
10
SOLUFORCE® WaTER daTa SHEET
SOLUFORCE® WATER DATA SHEET
SOLUFORCE® type L450 L540 M480 M570 H415 H515Dimensions
Nominal diameter 100 mm / 4’’ 150 mm / 6’’ 100 mm / 4’’ 150 mm / 6’’ 100 mm / 4’’ 150 mm / 6’’
outside diameter 125 mm / 5’’ 150 mm / 6’’ 125 mm / 5’’ 150 mm / 6’’ 125 mm / 5’’ 150 mm / 6’’
Inside diameter 100 mm / 4’’ 125 mm / 5’’ 100 mm / 4’’ 125 mm / 5’’ 100 mm / 4’’ 125 mm / 5’’
Weight in air < 6 kg/m / 4.2 Lb/ft <10 kg/m / 7 lb/ft
Technical Details
liner material HDPe, black, type Pe100
cover material HDPe, white, uV stabilised, type Pe100
reinforcement Aramid fibre High strength steel wire cord
Ratings
Design pressure as per APi RP 15S
Hydrostatic Design Basis (HDB), lcl 20 years (API rP 15S)
45 Bar / 644 psi
36 Bar / 522 psi
111 Bar / 1610 psi
90 Bar / 1305 psi
N/A
Design pressure, fAT (API 17J) N/A195 Bar / 2828 psi
195 Bar / 2828 psi
Short term bursting pressure (STHB)
> 144 Bar / 2088 psi
> 115 Bar / 1670 psi
>360 Bar / 5220 psi
> 270 Bar / 3915 psi
> 450 Bar / 6525 psi
> 360 Bar / 5220 psi
Maximum continuous operating pressure (20 yrs)
36 Bar / 522 psi
29 Bar / 421 psi
90 Bar / 1305 psi
72 Bar / 1044 psi
150 Bar / 2200 psi
150 Bar / 2200 psi
Operating temperatures
Maximum ambient and/or fluid temperature
65 °c / 150 °f
Minimum ambient and/or fluid temperature
Above freezing point of fluid
Design and Construction Parameters
flow
Hazen Williams friction factor (c) 150
Darcy Weisbach surface roughness (e)
0.0015 mm
Design lifetime
Surface installed 20 years
Buried 50 years
Minimum bending radius
In storage 1.25 m / 4´1.2’’
In service 3.00 m / 9´10.1’’
Test pressure
Maximum Hydrotest Pressure 49 Bar / 711 psi
40 Bar / 421 psi
123 Bar / 1784 psi
100 Bar / 1450 psi
195 Bar / 2828 psi
195 Bar / 2828 psi
Packaging
length per coil 400 m / 1312 ´ 220 m / 721´
Dimensions per coil (l x h x w)400 x 420 x 115 cm
410 x 420 x 146 cm
400 x 420 x 115 cm
410 x 420 x 146 cm
410 x 420 x 146 cm
Weight per coil2200 kg / 4846 Lbs
2720 kg / 5991 lbs
2240 kg / 4933 Lbs
2760 kg / 6079 lbs
1940 kg / 4273 Lbs
2380 kg / 5242 Lbs
SOLUFORCE® WaTER
11
SOLUFORCE® WaTER
SOLUFORCE® LIGHT : L450 - L540
With a maximum operating pressure of 36 Bar and 29 Bar for the (4” and 6” pipe resp.), LIGHT provides an excellent, flexible solution for medium pressure water transport. As it is fully non-metallic it serves any sour application, without restrictions regarding H2S and co2 content.
SOLUFORCE® HEAVY : H415 - H515
for very high operating pressures up to 150 Bar a steel wire reinforced pipe is available (both 4” and 6”). This pipe is specially developed for very high pressure (saline) water injection. It is resistant to (strong) inorganic acids like HCl, H2SO4 and (strong) alkaline materials, including NaoH, KOH, and NH3 solutions. As this pipe is steel wire reinforced the pipe has some limitations for sour H2S applications according to NAce Mr0175 / ISo15156. The co2 content in the fluid may be very high.
SOLUFORCE® CLASSIC : M480 - M570
Available with a maximum operating pressure of 90 Bar and 72 Bar (4” and 6” resp.), CLASSIC serves a very wide range of applications due to its unique combination of properties. Being fully non-metallic it is the ideal solution for even the toughest high pressure application such as sour service, without restrictions regarding H2S and co2 content.
Temp [°c] uprating Factor M480 [bar]* M570 [bar]*
10 1,54 137 109
20 1,45 129 103
30 1,34 120 96
40 1,24 111 89
50 1,14 102 81
55 1,1 98 78
60 1,05 93 75
65 1 90 72
70 0,95 85 68
80 0,86 76 61
Temperature uprating factors and maximum pressure rating
*water service
12
lekhwair, oman sour oil service7200 m - Pressure 735 psi - Temperature 120 f°
Installed in August 2000
SOLUFORCE® HydROCaRBONS
HIGH PRESSUREPLASTIC PIPE SYSTEMSFOR HYDROCARBONS
13
SOLUFORCE® HydROCaRBONS
SOLUFORCE® LIGHT : L450 - L540A synthetic fibre tape reinforcement for lower pressure applications.
SolufoRce® RTP oil hook up line
SOLUFORCE® CLASSIC : M480 - M570A synthetic fibre tape reinforcement for medium pressure applications.
SOLUFORCE® CLASSIC HPG : M480 HPG - M570 HPGA synthetic fibre tape reinforcement with a low gas permeation grade liner for medium pressure applications.
SOLUFORCE® HEAVY : H415 PVDF - H515 PVDFA PVDf pipe for very high temperatures is under design. Please consult Soluforce® for further details.
NEW
14
SOLUFORCE® HydROCaRBONS daTa SHEET
SOLUFORCE® HYDROCARBONS DATA SHEET
SOLUFORCE® type L450 L540 M480 M570 M480 HPG M570 HPGDimensions
Nominal diameter 100 mm / 4’’ 150 mm / 6’’ 100 mm / 4’’ 150 mm / 6’’ 100 mm / 4’’ 150 mm / 6’’
outside diameter 125 mm / 5’’ 150 mm / 6’’ 125 mm / 5’’ 150 mm / 6’’ 125 mm / 5’’ 150 mm / 6’’
Inside diameter 100 mm / 4’’ 125 mm / 5’’ 100 mm / 4’’ 125 mm / 5’’ 100 mm / 4’’ 125 mm / 5’’
Weight in air < 6 kg/m / 4.2 Lb/ft <10 kg/m / 7 lb/ft
Technical Details
liner material HDPe, black, type Pe100 HDPe, low permeation grade
cover material HDPe, white, uV stabilised, type Pe100
reinforcement Aramid fibre
Ratings
Design pressure as per APi RP 15S
Hydrostatic Design Basis (HDB), lcl 20 years (API rP 15S)
45 Bar / 644 psi
36 Bar / 522 psi
111 Bar / 1610 psi
90 Bar / 1305 psi
111 Bar /1610 psi
90 Bar /1305 psi
Short term bursting pressure (STHB)
> 144 Bar / 2088 psi
> 115 Bar / 1670 psi
>360 Bar / 5220 psi
> 270 Bar / 3915 psi
>360 Bar /5220 psi
> 270 Bar /3915 psi
Maximum continuous operating pressure (20 yrs)
26 Bar /377 psi
21 Bar /305 psi
65 Bar /943 psi
52 Bar /754 psi
65 Bar /943 psi
52 Bar / 754 psi
Maximum partial gas pressure @ 65 °c / 150 °f
26 Bar /377 psi
21 Bar /305 psi
21 Bar /305 psi
21 Bar /305 psi
65 Bar /943 psi
52 Bar / 754 psi
Operating temperatures
Maximum ambient and/or fluid temperature
65 °c / 150 °f
Minimum ambient and/or fluid temperature
-40 °C / -40 °F
Design and Construction Parameters
flow
Hazen Williams friction factor (c) 150
Darcy Weisbach surface roughness (e)
0.0015 mm
Design lifetime
Surface installed 20 years
Buried 50 years
Minimum bending radius
In storage 1.25 m / 4´1.2’’
In service 3.00 m / 9´10.1’’
Test pressure
Maximum Hydrotest Pressure 49 Bar / 711 psi
40 Bar / 421 psi
123 Bar / 1784 psi
100 Bar / 1450 psi
123 Bar /1784 psi
100 Bar /1450 psi
Packaging
length per coil 400 m / 1312 ´
Dimensions per coil (l x h x w)400 x 420 x 115 cm
410 x 420 x 146 cm
400 x 420 x 115 cm
410 x 420 x 146 cm
400 x 420x 115 cm
410 x 420x 146 cm
Weight per coil2200 kg / 4846 Lbs
2720 kg / 5991 lbs
2240 kg / 4933 Lbs
2760 kg / 6079 lbs
2240 kg /4933 Lbs
2760 kg /6079 lbs
15
SOLUFORCE® LIGHT : L450 - L540
With a maximum operating pressure of 26 Bar and 21 Bar (4” and 6” pipe resp.), Soluforce® lIGHT provides an excellent, flexible solution for medium pressure oil transport. for example beam pump flow lines are a typical application for this pipe. As this pipe concept is fully non-metallic it can serve any sour application, without restrictions regarding H2S and co2 content.
SOLUFORCE® CLASSIC : M480 - M570
Soluforce® clASSIc is available with a maximum operating pressure of 65 Bar and 52 Bar (4” and 6” resp.). Being fully non-metallic, it is the ideal solu-tion for even the toughest applications such as sour oil service without restrictions regarding H2S and co2 content. Applications such as beam pump flow lines or eSP (submerged pumps) flow lines are areas where this pipe will prove its benefits.
SOLUFORCE® CLASSIC HPG : M480 HPG - M570 HPG
for high pressure applications with a high asso-ciated gas content clASSIc HPG was developed. This pipe has a special low gas permeation inner liner. Beam pump or eSP flow lines for oil transport with a high Gor (gas to oil ratio) will benefit from the ease of use, even with very high H2S and co2 contents. It is available with a maximum operating pressure of 65 Bar and 52 Bar (4” and 6” resp.) for high Gor applications.
SOLUFORCE® HydROCaRBONS
16
SOLUFORCE® gaS
HIGH PRESSUREPLASTIC PIPE SYSTEMSFOR GAS
17
SOLUFORCE® gaS
SOLUFORCE® LIGHT : L450 - L540A synthetic fibre tape reinforcement for medium pressure applications.
SOLUFORCE® CLASSIC HPG : M480 HPG - M570 HPGA synthetic fibre tape reinforcement for high pressure applications.
SOLUFORCE® HEAVY PA : H415 PA - H515 PAA high strength steel wire reinforcement with polyamide inner lining for very high pressure gas applications.
NEW
18
SOLUFORCE® gaS daTa SHEET
SOLUFORCE® GAS DATA SHEET
SOLUFORCE® type L450 L540 M480 HPG M570 HPG H415 PA H515 PADimensions
Nominal diameter 100 mm / 4’’ 150 mm / 6’’ 100 mm / 4’’ 150 mm / 6’’ 100 mm / 4’’ 150 mm / 6’’
outside diameter 125 mm / 5’’ 150 mm / 6’’ 125 mm / 5’’ 150 mm / 6’’ 125 mm / 5’’ 150 mm / 6’’
Inside diameter 100 mm / 4’’ 125 mm / 5’’ 100 mm / 4’’ 125 mm / 5’’ 100 mm / 4’’ 125 mm / 5’’
Weight in air < 6 kg/m / 4.2 Lb/ft < 10 kg/m / 7 lb/ft
Technical Details
liner material HDPe, black, type Pe100 HDPe, low permeation grade API grade Polyamide
cover material HDPe, white, uV stabilised, type Pe100
reinforcement Aramid fibre High strength steel wire cord
Weight in air < 6 kg/m / 4.2 Lb/ft <10 kg/m / 7 lb/ft
Ratings
Design pressure as per APi RP 15S
Hydrostatic Design Basis (HDB), lcl 20 years (API rP 15S)
45 Bar / 644 psi
36 Bar / 522 psi
111 Bar / 1610 psi
90 Bar / 1305 psi
N/A
Design pressure, fAT (API 17J) N/A 195 Bar / 2828 psi 195 Bar / 2828 psi
Short term bursting pressure (STHB)
> 144 Bar / 2088 psi
> 115 Bar / 1670 psi
>360 Bar / 5220 psi
> 270 Bars / 3915 psi
> 450 Bar /6525 psi
> 360 Bar /5220 psi
Maximum continuous operating pressure (20 yrs)
26 Bar /377 psi
21 Bar /305 psi
65 Bar /943 psi
52 Bar /754 psi
150 Bar /2200 psi
150 Bar /2200 psi
Operating temperatures
Maximum ambient and/or fluid temperature
65 °c / 150 °f65 °c / 150 °f
(85 °c / 185 °f, dry fluid)
Minimum ambient and/or fluid temperature
-40 °C / -40 °F
Design and Construction Parameters
flow
Hazen Williams friction factor (c) 150
Darcy Weisbach surface roughness (e)
0.0015 mm
Design lifetime
Surface installed 20 years
Buried 50 years
Minimum bending radius
In storage 1.25 m / 4´1.2’’
In service 3.00 m / 9´10.1’’
Test pressure
Maximum Hydrotest Pressure 49 Bar / 711 psi
40 Bar / 421 psi
123 Bar / 1784 psi
100 Bar / 1450 psi
195 Bar /2828 psi
195 Bar /2828 psi
Packaging
length per coil 400 m / 1312 ´ 220 m / 721´
Dimensions per coil (l x h x w)400 x 420 x 115 cm
410 x 420 x 146 cm
400 x 420 x 115 cm
410 x 420 x 146 cm
410 x 420 x 146 cm
Weight per coil2200 kg / 4846 Lbs
2720 kg / 5991 lbs
2240 kg / 4933 Lbs
2760 kg / 6079 lbs
1940 kg /4273 Lbs
2380 kg /5242 Lbs
SOLUFORCE® gaS
19
SOLUFORCE® LIGHT : L450 - L540
With a maximum operating pressure of 26 Bar and 21 Bar (4” and 6” resp.), Soluforce® lIGHT provides an excellent, flexible solution for medium pressure gas transport. As this pipe concept is fully non-metallic it can serve any sour applications, without restrictions regarding H2S and co2 content.
SOLUFORCE® CLASSIC HPG : M480 HPG - M570 HPG
Available with a maximum operating pressure of 65 Bar and 52 Bar (4” and 6” resp.), Soluforce® clASSIc serves a very wide range of applications due to its unique combination of properties. The special low gas permeation inner liner ensures a safe operation. Being fully non-metallic pipe, this is the ideal solu-tion for even the toughest applications such as sour gas service, without restrictions regarding H2S and co2 content.
SOLUFORCE® HEAVY PA : H415 PA - H515 PA
for very high operating pressures up to 150 Bar a steel wire reinforced pipe is available (both 4” and 6”) with a special polyamide inner liner. This pipe is specially developed for high pressure gas applica-tions. As this pipe is steel wire reinforced the pipe has some limitations for sour H2S applications according to NAce Mr0175 / ISo 15156, although the co2 to content in the gas may be very high.
SOLUFORCE® gaS
20
SOLUFORCE® FITTINgS
HIGH PRESSUREPLASTIC PIPE SYSTEMSFITTINGS
21
SOLUFORCE® PIPE TO PIPE COUPLINgS
• SOLUFORCE® in line coupling
• SOLUFORCE® Pipe to Pipe connector in stainless steel 316
• Pipe to pipe connector with GRE/Plastic parts connect to SOLUFORCE® pipe.
• SOLUFORCE® in line coupling with white anti UV protective sleeve.
Soluforce® in line coupling
Soluforce® Pipe to Pipe connector «P2P»
22
SOLUFORCE® ENd-FITTINgS
• SOLUFORCE® end fitting in nylon coated ductile iron with nylon insert. No fluid to metal contact.
• SOLUFORCE® weld stub
• SOLUFORCE® end fitting in stainless steel 316 with GRE/plastic connection to the pipe.
• SOLUFORCE® end fitting with white anti UV protective sleeve for hook up to existing flowlines in other materials. The flange is ANSI 600#.
23
SOLUFORCE® SWagEd FITTINgS
• SOLUFORCE® swaged fitting in stainless steel
• SOLUFORCE® swaged fitting
• The swaging machine.
• SOLUFORCE® can rent out swaging machines and provide swaging connection services upon request.
Swaged fittings are mostly used in combination with SOLUFORCE® HeAVY at 150 Bars operating pressure
24
SOLUFORCE® CONNECTION SySTEM
HIGH PRESSUREPLASTIC PIPE SYSTEMSCONNECTION SYSTEM
SolufoRce® welding kit
25
SOLUFORCE® CONNECTION SySTEM
1.2 SOLUFORCE® pipe to pipe connection concept
To connect two Soluforce® pipes the Soluforce® in-line coupler is used.
The inline connection technique is a 2 step process consisting of:
a) butt-weld of the liner pipe for a 100% leak free connection; b) electrofusion of the centrally placed in-line coupler for strengthening the connection.
After welding the pipe-ends form a fully integrated plastic connection.
The Soluforce® electrofusion in-line coupler basically consists of a Gre-reinforced plastic sleeve, with an integrated copper heating-coil (photo 1). Photo 2 shows the pipe to pipe connection after welding.
1.1 Introduction
To connect Soluforce® pipes and hook-up the Soluforce® pipeline to existing pipe work, PIPelIfe manufactures two special patented couplers: end-fitting and in-line coupler. Both couplers are based on the electrofusion principle.
PIPelIfe provides just one type of coupler and end-fitting for each nominal pipe diameter. The couplers are stronger than the highest available pipe rating, and therefore do not need any special engineering attention.
Photo 1A: SolufoRce® in-line couplerPhoto 1B: SolufoRce® Pipe to pipe connector is an alternative to the in-line coupler. It can be factory fitted upon request.
Photo 2
26
SOLUFORCE® CONNECTION SySTEM
1.3 Soluforce® pipe to pipe connection in 8 stepsThe complete process is computer controlled with no possible human error.
The computer controls all aspects of non destructive testing NDT.
1- Reading the coupler datarunning the “bar code reader” over the barcode of the in-line coupler will identify the coupling and initiate the welding procedure (photo 3). After the in-line coupler condition is tested by the cNc-unit the preparations can start.
2- Scraping the pipe surfaceThe pipe-end cover layers are scraped to get a fresh Pe-surface to weld the in-line coupler electrofusion sleeve (photo 4).
3- Loading pipe into the welding frameThe in-line electrofusion sleeve is cleaned and slid over one pipe-end. The pipe-end with the in-line coupler and the second pipe-end are loaded into the welding frame (photo 5).
4- Trimming the pipe endsBy means of one of the trimming tools both pipe-end faces are trimmed resulting in a small length of free liner pipe necessary for butt-welding (photo 6).
Photo 3: Reading the barcode with the «bar code reader»
Photo 4: Scraping the pipe cover layer
Photo 5: Pipe-ends loaded in fusion frame
Photo 6: Trimming the pipe-ends
27
SOLUFORCE® CONNECTION SySTEM
5- Butt-welding the linersAfter removing the burrs a heating-plate is inserted for around 60 seconds to heat both pipe-ends (photo 7).
6- Butt-weld coolingThe heating-plate is automatically removed and the pipe-ends pressed together (photo 8). The butt-weld procedure is fully controlled by the cNc-unit.
7- Welding of the electrofusion sleeveAfter a cooling time of approx. 8 minutes the in-line coupler electrofusion sleeve is slid back centrally on the butt-weld and fused to the pipe connection by energizing the copper heating-coil for about 4 minutes (photo 9). When the electrofusion is finished the coupler must be cooled for about 30 minutes.
8- Cooling of the connectionAfter expiry of the cooling time, the welding parameters are checked by the cNc-unit. If the welding parameters are within the specifications, the connection is approved (“Parameters oK” is displayed). Now the pipe to pipe connection can be removed from the welding frame and the pipe put in place.
1.3 Soluforce® pipe to pipe connection in 8 stepsThe complete process is computer controlled with no possible human error.
Photo 7: Heating the liner-pipe ends by means of the heating-plate
Photo 8: butt-welding of the pipe-ends
Photo 9: In-line coupler electrofusion sleeve centrally placed over the pipe-ends and connected
Photo 10: After cooling the in-line connection is ready
28
SOLUFORCE® CONNECTION SySTEM
In order to hook-up the Soluforce® pipeline to existing pipe work the Soluforce® end-fitting is used. The end-fitting is a combination of an electrofusion end-fitting sleeve and several steel parts (photo 11)
The Soluforce® electrofusion end-fitting sleeve basically consists of a Gre-reinforced plastic sleeve, with an integrated copper heating-coil (figure 10).To make the connection the plastic sleeve is electrofused on the pipe-end.After electrofusion the end-fitting and the pipe-end are fully integrated. To connect the pipe-end to the existing pipe work the steel parts are put inplace. The steel parts mechanically interlock on the plastic sleeve and can be bolted to the existing pipe works by means of a standard flange (See photo 11).for all pipe sizes the Soluforce® standard end-fitting product has a SS316 6” 600 pounds ANSI rf flange, which easily can be bolted to the existing pipeworks (photo 11 and 12).
1.4 Soluforce® end-fitting concept (flange)
Photo 11: SolufoRce® flanged and-fitting
Photo 12: SolufoRce® electrofusion end-fitting sleeve
29
SOLUFORCE® CONNECTION SySTEM
1.5 Soluforce® end-fitting in 5 stepsThe complete process is computer controlled with no possible human error.
1- Reading the coupler dataThe cNc-unit will lead the operator through the welding procedure. By running the “bar code reader” over the barcode the end-fitting is identified and the end-fitting welding procedure started (photo 13).
2- Scraping the pipe surfaceBy using the pipe-end scraping tool the top-layer of the pipe-cover is removed over the entire pipe surface and length of the end-fitting (photo 14).
3- Trimming the pipe endAfter loading the pipe-end into the welding frame the trimming tool is put in place to trim the pipe-end (photo 15)
Photo 13: Reading the barcode with the «bar code reader»
Photo 14: Scraping of the pipe outer surface
Photo 15: end-fitting trimming in progress
30
SOLUFORCE® CONNECTION SySTEM
5- Assembly of the steel partsNow the end-fitting connection can be taken out off the welding frame. After installation of the steel parts (photo 17) the pipe can be connected to theexisting steel pipeline.
SOLUFORCE® end-fitting (Weld stub)for the gas transport and distribution pipe systems flanged connections are not allowed. for the connection of Soluforce® rTP pipes to existing steel pipeline end fittings may be supplied with a weld stub. The welding procedure is the same. The termination is re-designed into a weld stub which can be connected by steel welding onto the existing steel pipe (photo 18).
4- Welding of the electrofusion sleeveThe cleaned end-fitting sleeve is pushed over the cleaned pipe-end and fixed between the clamps. The fusion leads are connected to the end-fitting terminals and the electrofusion started (photo 16). The cNc-unit will check the connection and when the connection is approved electrofusion is started by energizing the copper heating-coil for about 4 minutes. When the electrofusion is finished the fitting must be cooled for about 30 minutes. After expiry of the cooling time, the welding parameters are checked by the cNc-unit. If the welding parameters are within the specifications, the connection is approved (“Parameters oK” is displayed).
1.5 Soluforce® end-fitting in 5 stepsThe complete process is computer controlled with no possible human error.
Photo 16: The actual welding of an end-fitting
Photo 17: Installing the steel parts
Photo 18: SolufoRce® end-fitting with weld stub
31
SOLUFORCE® WELdINg EqUIPMENT
SOLUFORCE® REPaIR PROCEdURE
The Soluforce® welding kit contains all the necessary tools to weld the Soluforce® fitting system. The kit is packed in a 20 ft container.The main part is the Soluforce® welding tool, which is based on standard available equipment modified for the welding of the Soluforce® fitting system.
The equipment is fully automatic and cNc controlled.
The welding system consists of :
a) cNc unit to make computer controlled welds, data acquisition of the welding parameters and driving the hydraulic system ;b) Welding generator for delivery of the electrical power for electrofusion ;c) Heating plate for heating up the pipe-ends necessary for making the linerbutt-weld ;d) Welding frame for fixing the pipes and controlled welding process ;e) Pipe trimmers to prepare the pipe-end face before welding ;
A full repair procedure exists.Please contact Soluforce® for futher details
Soluforce® Welding equipment kit
32
SOLUFORCE® OFFSHORE
HIGH PRESSUREPLASTIC PIPE SYSTEMSOFFSHORE
Special over-size drums for offshorecan be supplied on demand
33
SOLUFORCE® OFFSHORE
When installed empty, the maximum external pressure on Soluforce®, depending on diameter, is about 0.3 MPa, which limits the water depth to approximately 30 meters. However, when the Soluforce® rTP system is kept pressurized or water filled during installation and operation there is no theoretical limit to the water depth.
For oil and water pipes, the maximum water depth is therefore much more than 30 meters, and limited in practice by the maximum allowable tensile load during installation. for gas pipe, the maximum water depth is determined by the hydrostatic collapse resistance.
for more information contact us directly at [email protected] or visit our website www.soluforce.com to download our brochure and submit your questions. Project references can be supplied upon demand. A design guideline for offshore installation can be obtained from Soluforce.
conforms to API rP 15S or API 17J for spoolable composite pipe systems.SoLuForcE® rTP is DNV certified.
SOLUFORCE® typeSOLUFORCE® CLASSIC SOLUFORCE® HEAVY
M480 M570 Standard H415 H415 StandardDimensions
Nominal diameter (mm) 100 (4“) 125 (5“) 100 (4“) 125 (5“)
Weight, empty in air (kg/m) 4,6 5,9 7,0 9,0
Weight, empty submerged (kg/m) -8,1 -12,4 -5,6 -8,9
Weight, waterfilled, submerged (kg/m) -0,3 -0,4 2,2 3,1
Maximum pressure, water service (barg) 90 72 DNV 150 150 DNV
Maximum pressure, hydrocarbon service (barg) 64 51 API rP 15S consult Pipelife API 17J
Maximum pressure, gas service1 (barg) 64 51 API rP 15S consult Pipelife API 17J
Maximum hydrotest pressure2 (barg) 123 100 DNV 195 195 DNV
Maximum service température (c°) 65 65 65 65
Internal surface roughness (Darcy Weisbach) (mm) 0,0015 0,0015 0,0015 0,0015
Hazen Williams friction factor 150 150 150 1501 Special grade HDPe linerpipe2 Max 24 hours, test medium: water. for SolufoRce® Heavy see API 17J, chapter 9.
34
SOLUFORCE® OFFSHORE
HydROSTaTIC COLLaPSE RESISTaNCE
Soluforce® is suitable for static applications. An engineering design guideline is available upon request. Please contact Soluforce.
Soluforce® is not an engineering design consultant and cannot undertake the design of offshore pipelines. We are able to recommend offshore design consultants who know the Soluforce® product range and have experience of using it in offshore designs.
for dynamic applications please consult Soluforce®.
SolufoRce® classic RTP during installation with concrete block attachment for sinkingto bottom of sea.
35
SOLUFORCE® OFFSHORE
Disclaimer:All products purchased from or supplied by PIPelIfe are subjected to terms and conditions set out in the contract, order acknowledgement and/or bill of lading. PIPelIfe warrants only that its product will meet those specifi cations designated in such contracts, order acknowledge-ments, and/or bills of loading. All other information including that herein, supplied by PIPelIfe, is considered accurate but is furnished upon the express conditions that the customer shall make his own assessment to determine the product’s suitability for a particular purpose. PIPelIfe makes no other warranty either express or implied, regarding such other information, the data upon which the same is based, or the results to be obtained from the use thereof; that any products shall be merchantable or fit for any particular purpose; or that the use of such other infor-mation or product will not infringe any patent.
SOLUFORCE®
FLEXIBLE THINKING
www.soluforce.com
PIPELIFE NEDErLAND B.V.flevolaan 7
1601 MA NetherlandsTel.: +31(0) 228 355 555Fax: +31(0) 228 355 520
Sept
embe
r, 20
09 /
Cop
yrig
ht: P
iPel
ife
Ned
erla
Nd
bv