Pipe Lining - Before / After · ASTM specifications. Comes in 2.2 CFM and 4.8 CFM Electric Roller...

Cured-In-Place Pipe (CIPP) Lateral Lining Supplier

Drain, Waste & Vent Pipe (AIPPR) Rehabilitation Supplier

Quality Meets Variety 2020Product Catalog

To Order Call:888.354.6464

www.pipeliningsupply.com

Pipe Lining - Before / After

To Order Call: 888.354.6464


1

Table of Contents

Information............................................................................. 2

Quik-Shot Inversion System................................................. 3-4

Quik-Heater...........................................................................5-6

Calibration Equipment & Vacuum......................................... 7-8

Quik-Coating System...........................................................9-10

Renssi® High Speed Machines................................................ ..11

Renssi® Companion Tools...................................................12-14

Liners & Calibration Tubes..................................................15-16

Epoxy Resin.........................................................................17-18

Resin & Tubing...................................................................19-20

Customizable Van, Truck or Trailer.....................................21-22

Accessories ......................................................................23-24

Air Compressor & Sectional Seal Packers & Materials............25

Training, Customer Support & Certification...........................26

[email protected]


2

Where Customer Service Meets Customer Demand

Service: Our customers are attracted to us because of our quality, pricing, and our commitment to customer support. In an industry that requires much more than just materials, we offer our customers around the clock customer support.

Selection: It’s not only important to provide the best in quality, but equally important is providing variety as well. We avoid the attitude of having a one size fits all approach. AIPPR & CIPP lining is an ever-changing industry that requires a diverse ability to mold to different situations. We have a solution for any gravity fed drainage system in need of rehab.

Shipping: We offer shipping using the best shipping solutions. No processing fee, handling fee or other hidden cost. We look for the most cost-effective shipping method and our cost is your cost. If you have a preferred carrier (ie: UPS, FedEx) we can also ship on your account number.

Sales / Orders: Hours of operations are 8:00am to 4:30pm Monday - Friday. After hours and weekends orders can be arranging by setting up a pick up.

Payments accepted: Check, Wire Transfer, Visa, MC & American Express.

Technical Support: Pipe Lining Supply offers technical support 24/7.

No Minimum Orders: No minimum orders for liners and cal tubes. Resins are sold in pre-poured amounts for your convenience. Large resin drums and totes available.

Pricing: All Prices are net and listed in U.S. Dollars. Prices are subject to change without notice. Call for update pricing and/or update catalog.

Terms: Net 30 with approved credit only. **All Customers are required to fill out application to open an account.** Customer wishing to establish credit are required to complete the credit application.



3

Quik-Shot™ Inversion SystemThe Quik-Shot is the most advanced

lateral lining system available. Lightweight & portable and yet can

continuously feed to any length.

*See price list for complete list of size’s, part numbers and prices*

[email protected]


4

Silicone GasketReplacement silicone gasket for 3”, 4”, 5”, 6” and 8”

KitsQuik-Shot™ unit has kits available for 3”, 4”, 5”, 6” and 8”. Kit includes, nozzle, bats, stiffener and gasket.

Quik-Shot™ UnitThe Quik-Shot™ is the most ad-vance lateral lining system available. Compatible with all manufactur-er’s inversion lining materials. The patented design of the unit uses air to invert lining material but is equipped with a water port if water inversion is desired.

The basic unit comes with both 4”and 6” kits which includes:

•Bats for both 4” and 6”

•Stiffener plate for both 4” and 6”

•Improved nozzle for easy inversion.

•2 Silicone gaskets.

BatsReplacement Bats are available for 3”, 4”, 5”, 6” and 8”

Stiffener PlatesReplacement Stiffener Plates are avail-able - 3”, 4”, 6” and 8”



5

Quik-HeaterEquipped with a 199,000 BTU propane water heater that gives you the ability to cure your liners quickly.


[email protected]


6

Red & Black Circulation HoseUse with the Quik-Heater. 25 feet long with male and female camlock connectors.

Water ManifoldUse with the Quik-Heater. The all in one heat manifold adapts to red and black circulation hoses. 8 PSI pressure relief gauge. Used for 3”, 4”,6” and 8” liner.

Quik-HeaterThis heater will deliver up to 180 - degree water. It is equipped with a 199,000 BTU propane water heater that gives you the ability to cure your liners quickly. By using propane it can be operated inside a building. All this in a compact unit that can easily be maneuvered by one person.

The Quik-Heater comes standard with the following:

• Water Manifold

• 25’ Red hot water delivery hose

• 25’ Black return water hose

• 2 - 50’ LayFlat hoses

LayFlat Hose50 feet LayFlat hose with 1- male and 1-female hose fittings link together for heating. 100’ also available without hose fittings.



7

Calibration EquipmentCalibration of the impregnated liner is

essential in lateral lining. This insures that the finished liner meets the ASTM specification.


[email protected]


8

Calibration RollerHas a calibration gauge on unit to insure the proper amount of resin in every liner. Designed so it can be used as a standalone or truck mounted.Stands approximately 54” h. x 30” w.

Vacuum PumpPneumatic venture vacuum gener-ator pump. Assist with wet-out of lining materials. A must have for any lateral lining project and meets the ASTM specifications. Comes in 2.2 CFM and 4.8 CFM

Electric Roller (optional)Convert your manual roller to electric with our exclusive conversion kit.

Extender Table (optional)The 5’ Roller Extender table height is even with the top of bottom roller and ends 6” higher at the end.

Compact Electric Roller & ShelvesGreat for putting in your mobile shop. Smaller roller is 21.5” wide. Mount in van, truck or trailer. Bottom storage shelves ideal for storing resin.



9

Quik-Coating SystemThe Quik-Coating System restores drain, waste, and vent piping (DWV) to “like new” condition. Giving your pipe an additional 50+ years of use.


[email protected]


10

BrushesBrushes in 4 sizes to work in 1.5”, 2”, 3” and 4” lines.

Resin KitEach Kit includes 1 each of the “A” and “B” specially designed resins in easy to handle boxed containers.

Quik-Coating Standard KitThe Quik-Coating System is designed for the rehabilitation of drain, waste and vent from 1.5”- 6”*.

• 50 ft each of red and blue hoses.• Remote control flow meter.• 2 sets of quick connects for resin with clear hoses.• 4 - 3/8” brass compression fitting to ¼” barb fitting.• 6 plugs (3 red - 3 blue)• Digital Scale• Samsung Tablet• Maintenance Kit*Larger sizes can be done with additional equipment.

Brush Cleaner & AcetoneComes in 5 gallon buckets. Very Im-portant for proper maintenance of the brushes.

Micro Camera (optional)Micro camera system with viewing glasses.

Maintenance Kit (optional)Comes with cleaning solvant for both A and B along with discharge tanks.



11

RCM-36 High Speed MachineHigh Speed Machine with 118’ of 12mm cable for 110 power. Variable speed with electric clutch.

RCM-15 High Speed MachineHigh Speed Machine w/50’ of 8mm cable is powered by a Milwaukee drill.

RCM-25 High Speed MachineHigh Speed Machine with 82’ of 10mm or 12mm cable for 110 power. Variable speed w/electric clutch.

High Speed Machines Manufactured by Renssi® Tools offer a wide range of high-quality pipe cleaning equipment.


[email protected]


12

Companion Tools

Adjustable ClutchThe clutch is used as an accessory for a drill when rotating a cable with a chain knocker on it. The clutch prevents the cable of breaking down and personal injuries, if the tool gets stuck in the pipe while rotating. Does not include drill.

• Clutch for a drill Includes sleeves for 8mm, 10mm and 12mm cables.• Also includes clutch keys.• Clutch rotator sleeve

CablesReady to use cable and cover with a crimped end.

• 8mm cable x 30 feet long• 8mm cable x 60 feet long• 10mm cable x 30 feet long• 10mm cable x 60 feet long• 12mm cable X 60 feet long• 12mm cable x 100 feet long• Other lengths available for special order.

The cable can also be used without the machine. Any 2 speed hammer drill with a 1/2” chuck and 3,000-3,500 RPMs can be used. Please call for complete drill requirements.




13

Chain Knockers• For 2” lines use on 8, 10 or 12mm cable• For 3” lines use on 8, 10 or 12mm cable• For 4” lines use on 8, 10 or 12mm cable• For 6” lines use on 8, 10 or 12mm cable• For 8” lines use on 12mm cable

Chain Knocker with Drill Bit Head• For 8mm cable• For 10mm cable• For 12mm cable

Circular Chain Knockers• For 3” lines to use on a 10 or 12mm cable• For 4” lines to use on a 10 or 12mm cable• For 6” lines to use on a 10 or 12mm cable• For 8” lines to use on a 10 or 12mm cable

Companion Tools

Cable Connectors• For 2” or 3” centering axle• For 4” centering axle• For 6” centering axle


[email protected]


14

CuttersCutters are used in different opera-tions of relining process.• For 2-inch lines• For 3-inch lines• For 4-inch lines• For 6-inch lines

Collapse Line DrillConnect centering axel or another cable to your cable.• For 2-inch or 3-inch centering axel• For 4-inch centering axel• For 6-inch centering axel

WhipsGives you a bare end from your cable to add your companion tools or brushes.• For 8mm cable• For 10mm cable• For 12mm cable

Sandpaper HolderConnect to a cable and hold 4 sandpapers.• For 2-inch-wide sandpapers• For 4-inch-wide sandpapers

Sandpaper• 2-inch-wide x 4 inch long• 2-inch-wide x 6 inch long




15

Orange & Clear Calibration TubeHeavy duty polyester fabric with PVC coating stitched and taped joint. Maximum working tem-perature 80°C / 176°F. Available in 4” - 12”(2” available in clear only)

Green Calibration Tube Light weight polyester fabric with PVC coating. Overlapped and taped joints. Maximum working temperature 50°C / 122°F. Available in 4” - 6”

Liners and Calibration Tubes Our warehouses are stocked to serve you! Need some lateral liners? Need

Calibration tube? Call US! We can ship it to you when you need it.

Yellow Calibration Tube HF Heavy duty polyester fabric with high frequency (HF) welded overlap. Ideal for Inversion or “Pull in Place” Method Maximum working temperature 50°C / 122°F. Available in 3”


[email protected]


16

Stitched Seam Felt LinerPU coated polyester felt w/wo scrim. Available in 3mm or 4.5mm thickness. Stitched seam make inversion easy. Excellent for straight lines or lines with 22 degree or 45 degree turns. Available in 3” - 12”

PVC FlexLinerNon-woven needle punched PE felt liner with an impermeable PVC coating. Specially de-signed stitched seam and taped overlap joint capable of negotiating bends up to 45° with minimal wrinkling. Available in 4”and 6”

Next Gen LinerThis is a new product specially prepared needled felt that can transition from 4” to 6” diameter and negotiate bends. Comes in 4.5”

Transition LinersPU or PVC coated polyester felt with or with-out scrim. Stitch seam for ease of inversion. Use when pipe changes from 4” to 6”. 50’ of 4” & 50’ of 6” with transition. Can special order other sizes.

SuperFlex Thin / SuperFlex ThickVery flexible 2mm (thin) to 4.5mm (thick) liner with stitched seam and PU coating. Negotiates bends up to 90 degrees and can be used in diameter changes with minimal wrinkling. Available in 2”- 4” (thin) or 3”-8” (thick)

Our liners are ASTM, IAPMO, and ICC compliant and registered.

Other liners available - call for details.




17

4 to 1 Epoxy Resin

Quik-Pox™ resin and hardener systems have been developed by Pipe Lining Supply for the lateral lining industry that has been assisting

clients with epoxy systems for over 15 years.


[email protected]


18

Other Formulations available upon request.

**Cure time will vary depending on ground temperature.**Work time will vary depending on air temperature and amount of sun.

Our resins are ASTM, IAPMO, and ICC compliant and registered.

Quik-Pox Resin BaseCompatible with all Lining materials. Surpasses ASTM requirements. 4 to 1 mixing ratio when combined with our Quik-Pox hardeners. Packaged in 5 gal. pails of 40 lbs or in bulk.

Quik-Pox 30 Hardener1 part Quik-Pox 30 with 4 parts Quik-Pox Resin Base. Quik-Pox 30 offers work times of 30 minutes at 77 degrees.** Packaged in 3.5 gal. pails of 20 lbs or in bulk.

Quik-Pox 15 Hardener1-part Quik-Pox 15 with 4 parts Quik-Pox Resin Base. Quik-Pox 15 offers work times of 15 minutes at 77 degrees.** Packaged in 3.5 gal. pails of 20 lbs or in bulk.

Quik-Pox 60 Hardener1 part Quik-Pox 60 with 4 parts Quik-Pox Resin Base. Quik Pox 60 offers work times of 60 minutes at 77 degrees.**Packaged in 3.5 gal. pails of 20 lbs or in bulk.




19

Vinyl EsterCombined with our felt liner, meets the Greenbook requirement for the City of Los Angeles and is activated with the Perk catalyst.Available in 5 gal. pails of 40 lbs or in bulk.

Quik PE 15 PolyesterQuik PE Polyester Resin is an economical resin option. It is a styrene based resin that is activated with a Perk catalyst.Available in 5 gal. pails of 40 lbs or in bulk.

Perkadox CH-50Catalyst sold in small pre-measured containers. This fine powder easily mixes with either the Vinyl Ester Resin or the Polyester Resin to facilitate a consistent and uniform cure. Available in 4 oz jars or in bulk.

Resin KitEach Kit includes 1 each of the “A” and “B” specially designed resins in easy to handle boxed containers. This resin is for the Quik-Coating System.Available in 1 gal. cubetainers


[email protected]


20

Pre Liner TubePoly tubing with fiberglass reinforce-ment. Used when existing sewer line has pipe missing and/or water is infil-trating in to your line. Available in 4” & 6”

Pull Strap1” and 2” pull straps. Rolls of 300 feet each. Tinsel strength up to 1,200 lbs.

Poly TubingPoly Tubing is used for “Pull In Place” applications and to protect point repair equipment. Available in 3” and 12”

Poly RopeRoll of 600 feet. Tinsel strength up to 12,500 lbs.



21

Customizable Van, Truck or TrailerPipe Lining Supply is pleased to offer a fully customizable drain cleaning, coating & lateral lining MICROSHOP on wheels!

[email protected]


22

Customizable Shop on Wheels• Completely Customizable.• Plain White or Custom Wrapped.• Great for Plumbers, Excavators, & Drain Cleaning Contractors.• Room for all your Cured in Place Pipe (CIPP) Equipment.• Room for all your Coating Equipment for Drain, Waste and Vent (DWV).• Mounted Wet-Out Roller with Table and Shelves.• Compressed Air and Power.




23

ScaleUp to 140 lbs. measure capacity. Zero out feature to make weighting your resin easy.

Inversion HeadsInversion heads for tank type units. 90’s for 3”, 4” and 6”. Special order in 45 degrees &Straight angels.

Sewer Drain Camera SystemEquipped with a 7/8” camera head, 100’ fiberglass cable and 7’’ LCD monitor with SD card recording. Self leveling feature

Mixing Bit3” and 5” Bit for mixing resin compunds.

Air Control PlugAir manifold regulator control to beused when air curing your linerAir manifold for 3” and 8”

Wireless 512Hz LocatorCompatible with all SONDE camera heads. Light weight and runs off of 6 AA batteries. Distance reach of 12’


[email protected]


24

6” Male CapAir Cap for tank type units to hold correct amount of pressure during cure. Attaches to inversion heads with regulator.

IR GunGreat tool to measure resin temper-atures to compare to work/cure time charts. A must for any CIPP contrac-tor.

Slic LubeCIPP installation lubricant. No staining. No clean up. One-gallon container.

Coating ScaleDigital scale ideal for our poly urea resin used for coating. Measures in ounces to pounds.

Tear-AidTear-Aid is applied to repair rips or tears. Type A is to use with our lin-ers. TypeB is use with cal tubes.

USB Camera6mm C-Type Camera compatible with android or iPhone. 16’ of cable, great for 1”-1.5” pipe. Waterproof




25

The remarkably light, quiet and com-pact size of the X AIR Compressor, weighing only 298 lbs coupled with retractable handle and pneumatic tires, makes it manually transportable by one person.

It fits through the smallest of open-ings, yet is powerful enough for the largest of job sites. Ideal for sand-blasting, breakers, rock drills, cut-off saws, painting, chipping hammers, graffiti removal, post drivers, nail guns, staple guns and much more.

Included: Rubber Air Hose 3/4” x 50’ w/Chicago Fittings

All you need is a correct size packer and the sectional Seal Kit. Bulk Materials Offer Big Savings. Many accessories available that are not shown.

Have a spot that you need to repair? Do not want to dig-up the street or yard? The Sectional-Seal Point Repair system has equipment to repair lines from 3” in diameter to 24” in diameter. Packers and materials for mainline repairs also available.

Sectional Seal Packers & Materials

Portable Air Compressor - 70 CFM

[email protected]


26

Pipe Lining Supply excels at educating and training people on CIPP lateral lin-ing, AIPPR pipe coating, and high speed drain cleaning methods, plus standards & best practices. Our fully trained staff can train on all manufacturers lining and coating equipment as well as high speed drain cleaning equipment. If your staff is rusty, needs complete training, or is concerned about a unique job, con-tact us at 888-354-6464 or [email protected].

Training, Customer Support & Certification We don’t just sell equipment, we give you the

help to use your equipment properly & efficiently.

To Order Call:

[email protected]

Visit Us: www.pipeliningsupply.com

• State of the Art Equipment

• Quality Liners and Materials

• High Performing Resins

• Top-Notch Customer Support

PIPE LINING SUPPLY OFFERS:

Pipe Coating - Before / After

Pipe Lining - Before / After · ASTM specifications. Comes in 2.2 CFM and 4.8 CFM Electric Roller...

Documents

Transcript of Pipe Lining - Before / After · ASTM specifications. Comes in 2.2 CFM and 4.8 CFM Electric Roller...