Power. Speed. Accuracy. Simplicity.PieceMaker

MULTINAIL .COM DAHLSENS TRANSIT ION TO MULTINAIL 3

The latest evolution in saw technology – the PieceMakerThe PieceMaker is an Australian designed and manufactured saw that will cut, print and handle the timber you need for your truss, wall and floor manufacturing requirements. It can cut your standard and custom mitres, birdsmouths, raking plates and studs, low angles, long cuts, large timber sections and all your normal standard cutting. It’s the manufacturing centre that every truss plant needs.

Bigger. Faster. Stronger • Significantly increases productivity• Reduces downtime• Increases efficiency from cutting timber to production output

Australian• Designed and built in Australia for the Australian Market• Local support and spares

More cost effective• Elegantly designed, simpler and more cost effective to maintain• No requirement for expensive maintenance contracts

Job and Timber optimisation• Reduces waste. Cuts nogs from waste• Does Mitre cuts – saves on handling and another machine• Has a built-in ‘Designer’ cut mode (the operator can configure without waiting

for the detailer’s drawing)

Safer• The saw blade is fully enclosed offering a much safer working environment for the user• Reduces operator fatigue when comparing to traditional cutting methods

Reduces administration• Requires less administration• Easier to optimise as the saw conforms to production requirements

“The PieceMaker has effectively halved the time it takes to

produce the job. We were doing 500 – 600 pieces a day, we’re

now doing 2000, and I can easily see us doing 3000 pieces.

What would normally take a guy ½ day to prepare and cut is

now done in a couple of hours.”

Errol Olive, Cutting Supervisor,

TrussCorp

“The PieceMaker is outside of the pack in comparison to the others in the market.

Once you lose production in a plant like this, you can’t get it back. Having the guarantee

and reliability of local based service and repairs for breakdowns is very important.

With the PieceMaker, the fully enclosed blade is a major benefit as it dramatically

reduces the risk of injury.” Aaron Hillman,

General Manager, TrussCorp

“The work is getting out to the floor much faster – we’re reducing production time. Normally it’s the stuff at the end of the job that holds everything up - with the

work getting out to the floor much faster, we don’t have the guys at the table press standing around doing nothing waiting

for the timber to come through."Errol Olive,

Cutting Supervisor, TrussCorp

“The PieceMaker is so fast, with so much torque, you don’t need to put multiple stacks through it, you can put singles through and still get your output.” Warwick Porter, National Machinery Sales Manager Multinail

PieceMaker Features, Options & Technical Specifications

Specifications

Cutting heads 1

Motor size 7.5hp

Blade size 450mm

Infeed conveyor 6230mm(L) x 4060mm(W)

Outfeed conveyor 8581mm(L) x 2800mm(W)

Weight 4600kg approx.

Power requirements 63amp, 415v, 3 phase +N +E

Max. depth of cut 100mm

Min. finished length 1mm

Max. finished length 6000mm

Timber height range 35mm -100mm

Timber width range 70mm - 400mm

Min. mitre angles 15°

Min. cut angle 2°

Features • Supports all data down loads from

all the major software suppliers• Operational software simple to use

and train • Easy to calibrate

Standard Features • Dust extraction system • Includes waste conveyor• Ink jet timber printer• Full perimeter fencing

(rear of machine) • Spares kit

Options • Left or right hand feed

The outfeed system for the PieceMaker

Front view

Top view

15520mm

8607mm 1180mm 5733mm

4454

mm

746mm

2322

mm

155 Burnside RdStapylton, QLD 4207

Australia

07 3297 3250enquiry@multinail.com

multinail.com

Multinail Machinery Pty LtdABN 52 060 402 860