PICTURE TO COME...Negotiated sales for heavy equipment & industrial assets 1997 Caterpillar 777D...

Negotiated sales for heavy equipment & industrial assets

1997 Caterpillar 777D Asset 1

Year 1997Manufacturer CaterpillarModel 777DAsset Type Rock TruckSerial Number 3PR00382Usage 43,511 hrsComes with retarder, A/C, liner, heated box, auto lube, 27.00R49Notes fast fuel, Lincoln auto lube, Ansul LT125A fire suppression, Michelin XDR2 front, Goodyear RL-4H rear plumbed with ports for cold weather start/Porta-Thaw

Don’t miss out! Contact Scott Zeilstra to make an offer:+1.780.686.0725 [email protected] rbauction.com/privatetreaty

PICTURE TO COME

COMPONENT

CHANGES

SERVICE REPORTS

WORK ORDER HISTORY

Maintenance History for Equipment ID: RDC023Start Date Meter Reading (Hrs)Job Number / Description

20-Jan-2017 WOC216977 - PERFORM ENGINE VALVE SET 40,018.

28-Jul-2015 WOC236558 - FRONT TIRE INSTALLATION 40,868.

1-Jul-2015 WOC258355 - TYR > FY2016 PREPAID TIRES 43,511

1-Jul-2015 WOC257873 - 2016 R&M - JUL 1 TO JUN 30 43,511

24-Jun-2015 WOC257695 - SRV > CHANGE DIFF & FINAL OIL 43,511CARRY OUT DIFF AND FINAL OIL CHANGE

15-Aug-2014 WOC254376 - SRV > 1500 HR 430,404CARRY OUT 1500HR SERVICE AND REPAIRS AS REQUIRED

ENGINE HOURS:

DATE:

SERVICE CARRY OUT BY:

MAGNETIC PLUG REPORT

LHF/FD:RHF/FD:F/DIFF:LHR/FD:RHR/FD:R/DIFF:

ALL DEFECTS ENTERED INTO GP.

17-Jul-2014 WOC253954 - FIRE SUPPRESSION PM 43,172.

9-Jul-2014 WOC253916 - SRV > 1250 HR 430,404CARRY OUT 1250HR SERVICE AND REPAIRS AS REQUIRED

4-Jul-2014 WOC253938 - FIRE SUPPRESSION PM 43,151.

1-Jul-2014 WOC254193 - 2015 R&M - JUL 1 TO JUN 30 43,312



12-Jun-2014 WOC253716 - SRV > 1000 HR 43,152CARRY OUT 1000HR SERVICE AND REPAIRS AS REQUIRED

12-May-2014 WOC253477 - SRV > 750 HR 42,932

Page 1 of 42Emeco Canada Limited GST Registration # 104545959RTweb www.emecogroup.com Printed on: 12-Jan-2016

Meter Reading (Hrs)Start Date Job Number / Description

Maintenance History Continued for Equipment ID: RDC023

CARRY OUT 750HR SERVICE AND REPAIRS AS REQUIRED

6-May-2014 WOC253428 - BRAKE AND STEERING TEST 42,555.

22-Apr-2014 WOC253336 - SRV > 500 HR 42,613CARRY OUT 500HR SERVICE AND REPAIRS AS REQUIRED

20-Apr-2014 WOC241139 - FIRE SUPPRESSION PM 43,151.

4-Mar-2014 WOC252844 - SRV > 250 HR 42,371CARRY OUT 250HR SERVICE AND REPAIRS AS REQUIRED

26-Jan-2014 WOC210878 - BRAKE AND STEERING TEST 42,555.

1-Jan-2014 WOC246539 - 2014 R&M - JAN 1 TO DEC 31 41,8602014/01/15-OT-0000PIERRE PILOTEFIRE UP BACKHOE AND CLEAN UP BODY ON UNIT AND UNFROZE TAILGATE. CLEAN UP AROUND LAYDOWN EVERYTHING THAT THE WING BLOW

2014/01/16-ENCRAIG MISANCHUKC/O ENGINE HARNESS, TIE WRAP NEW HARNESS DOWN

2014/01/21-OT-41904PAUL HICKSTRAVELLED OUT TO THE UNIT AND BOOTED THE UNIT AND GOT IT RUNNING

2014/01/22-OT-41915PAUL HICKSTRAVELLED OUT TO THE UNIT AND GOTTHE UNIT RUNNING

2014/02/12-OTHARLEY OTTESENHOT BOX AND START UNIT. REMOVE AND FUEL HOT BOX

2014/02/16-ELELI HARRISCUSTOMER COMPLAINT OF CHARGE LIGHT ON, THEY BELIEVED THE ALTERNATOR BELT HAD BEEN THROWN OFF. INSPECTION REVEALED THE BELT WAS INTACT, SYSTEM VOLTAGE WAS 19.2V. INSPECT WIRING, TEST VOLTAGE EXCITE FIELD WINDING, BUT STILL NO CHARGE. ORDERED ALTERNATOR. UPON OPENING BOX IT WAS NOTED THE NEW ALTERNATOR WAS DIFFERENT. IT WAS LARGER, LONGER AND HAD 1 EXTRA TERMINAL. FINNING STATED IT WAS A SUITABLE REPLACEMEENT. INSTALLED ALTERNATORM EXCITED THE FIELD, BUT HAD NO CHARGE. HAD TO ABANDON REPAIR TO HELP OTHER TECHNICIAN WITH A DIFFERENT TASK

26-Dec-2013 WOC244994 - SRV > 2000 HR 42,067CARRY OUT 2000HR SERVICE AND REPAIRS AS REQUIRED

9-Dec-2013 WOC243603 - SRV > 1500 HR 41,801





ENGINE HOURS:

DATE:





2013/12/12-SL-41801MARTY HOFF1,500 HRS SERVICE

2013/12/12-SL-41801TYLER MACEACHENCHANGED ENG OIL. ALL FILTERS AND SAMPLED ALL OILS. CHECKED ALL LEVELS AND CHECKED ALLPLUGS

2013/12/12-SL-41802RYAN FAGNANCHANGED ENG OIL, ALL FILTERS AND SAMPLED ALL OILS CHECKED ALL LEVELS AND CHECKECD ALLPLUGS

2-Nov-2013 WOC240756 - SRV > 1250 HR 41,610CARRY OUT 1250HR SERVICE AND REPAIRS AS REQUIRED

ENGINE HOURS:

DATE:





6-Oct-2013 WOC238806 - SRV > 1000 HR 41,295CARRY OUT 1000HR SERVICE AND REPAIRS AS REQUIRED

ENGINE HOURS:

DATE:





3-Sep-2013 WOC234862 - SRV > 750 HR 40,952





ENGINE HOURS:

DATE:





2013/08/15 - 9888 - SLTYLER MACEACHERNCHANGED ENGINE OIL AND FILTERS. CHANGED AIR FILTER. CHECKED LEVELS, ADJUSTED STEERINGLEVEL

2013/09/07 - SL - 40952MARTY HOFF250HRS SERVICE. CLEAN UP TRUCK AND AREA.

1-Aug-2013 WOC186894 - FIRE SUPPRESSION PM 41,360

28-Jul-2013 WOC204677 - SRV > 500 HR 40,745CARRY OUT 500HR SERVICE AND REPAIRS AS REQUIRED

ENGINE HOURS:

DATE:





2013/07/31 - 40745 - SL OTLEE MEISE500HR PM.

2013/07/31 - 40745 - SL500HR SERVICE. CLEAN UP SITE. DISPOSE OF USED FILTERS.

7-Jul-2013 WOC236556 - REAR TIRE INSTALLATION 40,535.

16-May-2013 WOC223884 - BC-KMC - WASH BACK FROM RENT 40,439QTM 4600

BC KMC001 - WASH UNIT RDC023 - BACK FROM RENT

6-May-2013 WOC218885 - FRONT TIRE ROTATION 40,745TIRE REPAIR SCOPE:CHANGE OUT FRT TIRES

25-Mar-2013 WOC203479 - BACK CHARGES OILS ONLY 40,404QUOTE # QTM4447

BACKCHARGE OILS ONLY TO SUNCOR

28-Feb-2013 WOC182331 - 250HR SERVICE 40,437





ENGINE HOURS:

DATE:





2013-03-22- 250 HR PMLEE MEISECHANGE OILS AND FILTERS, REPLACE ONE OF THE ENG BREATHERS, HELP JIM WITH INSHEET

26-Jan-2013 WOC180758 - BRAKE AND STEERING TEST 40,018PREFORM B/S TEST

2013-01-25 STEERING & BRAKE TESTALLAN MORTONCHECKED OIL STEERING BALL STUDES FOR WEAR, CHECKED REAR BRAKE PACKS FOR WEAR %

2013-01-25 STEERING & BRAKE TEST - BALL STUDS, BRAKE PACK HEIGHTSSTEPHEN BEALCHECKED ALL BALL STUDS FOR WEAR TESTED OK, CHECKED REAR BRAKE PACK HEIGHTS FOR WEAR%, ORDERED PARTS FOR AIR BLEED TEST

20-Jan-2013 WOC178789 - VALVE SET 40,033PERFORM ENGINE VALVE SET

2013-01-20 ENGINE, VALVE SETSTEPHEN BEALVALVE SET

19-Jan-2013 WOC155423 - 2000HRS SERVICE 40,033





ENGINE HOURS:

DATE:





2013-01-21-2000 HR PMQUIN JENSONSL- GREASE UNIT ( 2 GREASE LINES MISSING, MARKED ON DEFECT LIST), CHECK OUT ALL HOSES,MANY HOSES CRACKED, TORQUE ROD END CLAMPS TORQUE ON INSEPECTION SHEET ISINCORRECT, DRAIN WATER/ SEDIMENT FROM FUEL TANK, INSPECT BOX PADS 4 CRACKED CHECKSTEERING COMPONENT HMV WEEPING FTMLT- SAFETY MEETING

2013-01-21- 2000 HR PMSTEPHEN BEALDRAIN TRANNY OIL AND DIFF, CHECKED SCREENS TRANNY TORQUE, CLEANED BREATHERS ,REPLACED FILTERS, HYD, FRONT BRAKE AND TORQUE, TRANNY, STEERING FILLED STEERING TANK,STARTED ON 2000 PM SHEET, CHECKING ENGINE MOUNTS, LIGHTS ECT, CLEANED WORK AREA,ORDERED PARTS, REPAIRED GREASE LINES

2013-01-22 - 2000 HR PM SERVICEALLAN MORTONFILLED FRONT HUBS, FILLED DIFF, CLEANED UP WORK AREA

2013-01-22 - 2000 HR PMSTEPHEN BEALFILLED ENGINE OIL & CHANGED OIL FILTERS, REMOVE FAN GUARD & BELTS, REPLACED A/C BELT,CLEANED WORK AREA, FILLED DIFF & WHEEL HUBS

2013-01-22 ENGINESTEPHEN BEALCHANGED OUT WATER PUMP, FILLED RADIATOR WITH COOLANT, FITTED NEW STARTER MOTOR,CLEANED WORK AREA

2013-01-22 2000 HR PM SERVICED GORMANCHANGED HYDRAULIC FILTERS, FILLED HYDRAULIC TANK, FILLED TRANS FLUID, DRAINED (*) HUBS,DRAINED LEFT REAR HUB

2013-01-21 2000 HR PMQUINN JENSENGREASE UNIT, 2 GREASE LINES MISSING, MARKED ON DEFECT LIST, CHECK OVER ALL HOSES, MANYHOSES CRACKED, TORQUE TIE ROD AND CLAMPS, TORQUE SPEC ON INSPECTION SHEET ISINCORRECT, DRAIN WATER, SEDIMENT FROM FUEL TANK, INSPECT BOX PADS, 4 CRACKED, CHECKSTEERING COMPONENETS, HMV WEELPING

2013-01-21 2000 HR PMSTEPHEN BEALDRAIN TRANNY OIL & DIFF, CHECKED SCREENS TRANNY, TORQUE, CLEAN BREATHERS, REPLACEDFILTERS, HYD, FRONT BRAKE & TORQUE, TRANNY, STEERING, FILLED STEERING TANK, STARTED ON2000 PM SHEET, CHECKING ENGINE MOUNTS, LIGHTS ETC, CLEANED WADE AREA, ORDERED PARTS,REPAIRED GREASE LINES

2013-01-19 2000 HR SERVICEDALE BEAUCHAMPSERVICE, PICK UP PARTS AT FINNING

2013-01-20 SERVICE, CHANGE OIL CUBESKIRK MACDOUGALLSHOP CLEAN UP, CHANGE OIL CUBES

2013-01-20 SERVICE 2000 PMSTEPHEN BEALDRAINED HYD OIL, TRANNY, STEERING TANK, LOOKING FOR FILTERS, ORDERED PARTS




2013-01-20 SERVICE OILSALLAN MORTONDRAINED ENG OIL, REMOVED & REPLACED FUEL FILTERS, REMOVE & REPLACE CAB & A/C FILTERS,REMOVE & REPLACE HYD BREATHERS, CLEANED UP OIL LEAKS

2013-01-19 SERVICE - 2000 HR PMQUINN JENSENCLEAN ENGINE PRECLEANERS AND CHANGE INNER AND OUTER AIR FILTERS, GREASE FOR HUB ANDIDLER PULLEY, CHANGE REAR DIFF BREATHER, SAFETY MEETING (JAN 18/19)

2013-01-24 SERVICE PARTS, GREASE LINEALLAN MORTONMEASURE UP AVERAGE LENGTH, GET WARDS TO FIT 1 END, FIT ONE END RUN LINE, MARK LINE &(*), GET WARDS TO CUT & FIT OTHER END, FIT ONE END & RUN LINE & FIT OTHER END, NEEDS TOBE PRIMED, CHECKED OVER MACHINE WHILE IT WAS RUNNING

2-Jan-2013 WOC175046 - JAN 2 - DEC 31 2013 R&M WO 40,018




2013-01-02DAVID DAWEPREP UNIT FOR WATER TANK REMOVAL, REMOVE HARNESS AND CONTROL FROM CAB, HOT BOXUNIT, HOOK UP CHARGER, BRING LOADER AND CABLES AS BOOST AID AND FIRE UP UNIT

2013-01-2013-01-20- PICK UP PARTSDALE BEAUCHAMPASSIST WITH DEFECTS LIST PICK UP PARTS AT FINNING

JOHN HOLLOWAYASSISTED MECHANICS WITH COLD START UP, ASSISTED WITH WATER TANK DISCONNECTS

2013-01-02FRASER GRIFFONMOVE HOT BOX TO UNIT, SET UP TO WARM UNIT, START DISCONNECTS TO REMOVE WATER TANK,PUT BOOSTER ON TO CHARGE BATTERIES, BRING LOADER OVER FOR BOOST, GOT UNIT RUNNING,PACK UP HOT BOX AND MOVE AWAY FROM UNIT, CHECK FOR LEAKS, SHUT TRUCK DOWN LOW ONFUEL

2013/01/02 TANK REMOVAL (WATER)FRASER GRIFFONPUT FUEL IN TIDY TANK, MOVE TANK TO OTHER YARD, PUT FUEL IN TRUCK, BRING TIDY TANK BACKAND FILL UP, BRING BOOSTER PACK OVER TO BOOST UNIT, MOVE UNIT TO SHOP, MOVE DOZER,OUT OF SHOP, PUT RDC050 IN SHOP, PUT WATER TRUCK ON PAD

2013/01/03 - REMOVE WATERB(*)YDAVID DAWEBOOST UNIT TO START, SET UP PAD BAY 5 TO PLACE UNIT, BRING UNIT ACROSS TO SHOP PAD 5

2013-01-04- WATER TANK REMOVALFRASER GRIFFONFINISH PREPING BOX FOR REMOVAL, REMOVE HOIST PINS AND SECURE HOIST CLY, SHOVEL SNOWOFF TOP TO EXPOSE LIFTING LUGS, MOVE UNIT TO REMOVE EXHAUST MUFFLER, REMOVE ROCKEJECTORS, REMOVE GREASE FITTINGS AND LOCKS ON BOX PINS, BOOST UNIT TO START

2013-01-04-REMOVE WATER TANKJOHN HOLLOWAYASSISTED MECHANICS WITH PREPING FOR WATER TANK REMOVAL, CHECKED ON DUMP BODY TOENSURE READY FOR INSTALL

2013-01-04-WATER TANK REMOVALDAVID DAWEDISCONNECT AND SECURE NECESSARY LINES, DISCONNECT PINS, CAP ALL LINES, REMOVE ROCKEJECTORS, CLEAR SNOW FROM TOP OF BODY , REMOVE EXHAUSE

2013-01-05 - WATER TANKFRASER GRIFFONBOOST & START UNITS IN YARD TO MOVE AND MAKE ROOM FOR CRANE, MOVE TRUCK FROM SHOPYARD TO ACROSS THE ROAD, SET UP & REMOVE WATER TANK, MOVE TRUCK INTO PLACE ANDINSTALL TRAY, INSTALL BOX PINS

2013-01-05 - WATER TANKKIRK GILLISTAKE OVER MANLIFT AND REMOVE SLINGS IN BOX, HELP INSTALL BOX PINS, CLEAN UP

2013-01-05 - WATER BODY & TRAYJOHN HOLLOWAYASSISTED MECHANICS WITH REMOVING WATER BODY & INSTALLING TRAY

2013-01-05 - WATER TANK & BODYDAVID DAWEGEAR UP FOR TANK REMOVAL, LOCATE PINS & HOSTING TOOLING, CLEAR AREA TO ACCESS TRAY,CLEAR AREA FOR TANK REMOVAL AND PLACEMENT

2013-01-22 HYDRAULIC MAINTENANCEALLAN MORTONREMOVING CRACKED HOSES, GET WARDS TO MAKE NEW HOSES, FIT NEW HOSE, FIT NEW FITTING,CLEAN UP WORK AREA

2013-01-22 ENGINE & CHANGE OUT WATER PUMP, STARTER MOTORALLAN MORTONCHANGE OVER SHAFT ONTO NEW PUMP, FIT NEW PUMP, HOOK UP ALL LINES & HOSES, HELP LIFTMOTOR INTO PLACE, CLEAN WORK AREA

2013-01-22 HYDRAULIC REPAIRS REPLACING HOSES




STEPHEN BEALREMOVED BRAKE LINES, WAITING ON FITTING FROM WARDS, REPLACED TORQUE - COVER LINES,ORDERED PARTS, CLEANED WORK AREA

2013-01-20 ENGINE PICK UP PARTSDALE BEAUCHAMPASSIST WITH DEFECTS LIST, PICK UP PARTS AT FINNING

2013-01-21 ENGINE, REMOVE WATER PUMPALLAN MORTONREMOVED WATER PUMP, DRAINED COOLANT, CLEAN UP MATTING SURFACE, TIDY UP BAY

2013-01-21 ELECTRICAL REPAIR WIRINGALLAN MORTONCHANGED OUT SWITCHES, FIXED DEUTSCH PLUG, ORDER PARTS, FIX STARTER MOTOR

2013-01-20 STARTER, TAKE OUT STARTER MOTORALLAN MORTONREMOVED STARTER MOTORS, ORDERED PARTS, CLEAN WORK AREA

2013-01-19 HYD LEAKSLARRY JACOBSASSIST WITH REPAIRING HYD LEAKS

2013-01-19 TRANSMISSION - LOCKOUT NOT WORKINGALLAN MORTONCHANGED OUT R/H INDICATOR LIGHT, CLEANED ALL BATTERY TERMINALS & SPRAY ON TERMINALPROTECTOR, DIAGNOSE WINDSCREEN FAULT, WASHER, ORDER PARTS, CHANGE OUT WASHERBOTTLE, FIX TRANS LOCKOUT PROBLEM, MOVE UNIT TO BAY 3, EMPTY BOX, CLEAN UP YARD, CLEANWORKSHOP

2013-01-19 CYLINDER - HOOK UP HOIST CYL/ASSEMBLE - ASSEMBLE UNITSTEPHEN BEALINSTALLED LIFT CYLINDER, FOUND SHIMS, PARK BRAKE WOULDN'T RELEASE BAD EARTH ONTRANNY NEUTREL SWITCH, REMOVED UNIT FROM W/SHOP, INTO BAY NEXT TO SERVICE (*BUND*),CLEANED BAYS, FITTED LINK, REMOVE RAM, REMOVED LEFT FENDER, BROKEN BOLTS, REMOVEDDRIVE SHAFT COVERS TO INSPECT FOR LEAKS, ORDERED PARTS

2013-01-19 HYD FIX LEAKS / TRAY - ASSEMBLE TRAYQUINN JENSENREPAIR OIL LEAK AT HYD PUMP DRIVE INPUT SHAFT (REPLACE SEAL) TORQUE, REMOVE BROKENBOLTS ON LIFT FRONT MUD FLAP MOUNT, INSTALL MUD FLAP, LOOK FOR OIL LEAK ON ENGINE ANDTRY TO VERIFY, LOOKS LIKE OIL PAN GASKET, CHANGE FIRE EXTINGUISHER

2013-01-18 CYLINDER - REMOVE HOIST CYLQUINN JENSENREMOVE LEFT BOX LIFT CYL

2013-01-18 WIRING - REPAIR TRANS LOCK OUT WIRESALLAN MORTONDEFECTS LIST, DIAGNOSE CAB DASH SWITCH LIGHTING PROBLEM, ORDER PARTS, DIAGNOSETRANS LOCKOUTSWITCH, ORDER PARTS, ORDERS PARTS FOR WINDOW WASHER UNIT, ORDERPARTS FOR 2000 HR SERVICE

2013-01-18 CYLINDERWARREN MACKENZIESTART TO INSTALL LIFT CYLINDER

2013-01-17 -HOWARD HAMMERMEISTERMOVE HEATERS TO UNIT, START HEATERS RUN AIR DUCTS TO FINAL DRIVES, TRANS AND HYDTANK, CONNECT HEAT PUMP TO COOLING SYSTEM, HEAT ENGINE ETC., START UNIT AND LEAVEIDLING

2013-01-17 COLD START - GET RUNNINGKIRK MACDOUGALLGET UNIT RUNNING, MOVE ACROSS YARD, ADD FUEL TO UNIT

2013-01-23- HYD LEAKSLARRY JACOBSASSIST INSTALLING HYD HOSES

2013-01-22 - ENGINE RESEAL STARTERDALE BEAUCHAMPLOCATE PARTS TO RESEAL STARTER, 2 STARTERS OFF, HAD TO DETERMINE CORRECT ONE TOINSTALL ONE NEW START ON, LOOKED FOR BOX HEATER PARTS IN COLD TENT, ALREADY O NTRUCK,




TRIED TO DETERMINE HYD HOSES THAT ARE TO BE REPLACED

2013-01-23- CHANGE HOSES RUNNING CHECKALLAN MORTONCHANGE OUT HOSES, WAITING ON HOSE FROM WARDS, START UP MACHINE CHECK FOR LEAKS TOPUP OILS, FIT CAPS TO BOX PINS, CLEAN UP WORK AREA

2013-01-23- ENGINE LEAKS AT STARTER/MISSING PARTS FOR BOX HEATDEAN FUDGELOOKED FOR BOX HEATER LARRY ASKED TO TEST STARTERS TO FIND GOOD ON, RESEAL HOSE ANDINSTALL STARTER

2013-02-03-INSTALL TARP , WIGGINSSCOTT MYLESWELD SOCKET TO REMOVE WIGGINS FITTING, INSTALL REAR FAST FUEL WIGGINS, INSTAL TARP ONFRONT GRILL

2013-02-02- HYD CYL OUTSHEETSCOTT MYLESDRAIN HYD TANK, GET CYL HOSES MADE FOR HOIST, INSTALL HOSES, FILL WITH OIL, CYCLE CYLAND RECHECK LEVEL AND FOR LEAKS, DO OUTSHEET, CLEAN WORK AREA

2013-02-02DAVID DEFEHRCLEAN CAB

2013-02-02- HOIST LINES /OUTSHEET INSPECTIONPIERRE ST. GEORGESGET HOIST LINES MADE UP, DRAIN HYD TANK, INSTALL HOSES AND FILL UP TANK, RAN OUT OF OILIN SHOP HAD TO CHANGE OUT LUBES, RUN UNIT UP AND DRAIN TO FILL CYL, AND CHECK FORLEAKS , DO OUTSHEET INSPECTION

2013-01-6 -DAVID DAWEPACKAGE UP MISC ITEMS & STORE WITH TANK

2013-02-01- OUTSHEETJERAMEY SCHMIDEDERPERFORMED A FIELD OUTSHEET INSPECTION

2013-02-01-TRAVIS GRUNERUDPARTS RUNS TO FINNING, PARTS SOURCING AND ORDERING, RELAY CUSTOMER COMPLAINTS

2013-01-4 WATER TANKFRASER GRIFFONFINISH PREPING BOX FOR REMOVAL, REMOVE HOIST PINS & SECURE HOIST CYL, SHOVEL SNOW OFFTOP TO EXPOSE LIFTING LUGS, MOVE UNIT TO REMOVE EXHAUST MUFFLER, REMOVE ROCKEJECTORS, REMOVE GREASE FITTINGS & LOCKS ON BOX PINS, BOOST UNIT TO START

2013-01-4 WATER TANKJOHN HOLLOWAYASSISTED MECHANICS WITH PREPPING FOR WATER TANK REMOVAL, CHECHKED ON DUMP BODY TOENSURE READY FOR INSTALL

2013-01-4 WATER TANKDAVID DAWEDISCONNECT & SECURE NECESSARY LINES, DISCONNECT PINS, CAP ALL LINES, REMOVE ROCKEJECTORS, CLEAR SNOW FROM TOP OF BODY, REMOVE EXHAUST

2013-02-01- COLD START UNITJOHN HOLLOWAYHOOKED UP HOTBOX AND HEATER TO UNIT, ORDERED PARTS TO INSTALL HOIST CYL, STARTEDUNIT

2013-02-01-BRUCE GREENWOODCLEAN UP ALMAND HEATER, CLEAN OUT BAY, MOVE AND ORGANIZE PARTS AREA TO GETACCESS TOCYL, BRING UNIT AND CYL TO SHOP, CLEAN UP BOXES AND INSTALL CYL, TRY TO LOCATED HOSEBUT UNABLE TO , RETORQUE FRONT AND OUTSIDE REAR WHEELS, TORQUE IS GREATER THAN 1680POUNDS, CLEAN UP BAY

2013-01-24 HYDRAULIC LEAKSLARRY JACOBSASSIST INSTALLING HYD HOSES AND GREASE LINES

2013-01-24 ELECTRICAL - REPLACE STARTER MOTOR




ALLAN MORTONREMOVED OLD STARTER THAT NIGHT SHIFT REFITTED, FITTED NEW STARTER MOTOR, HOOKED UPWIRING, TESTED

2013-01-24 HYD REMOVE REPLACE HOSE, FIX LEAK AT T/C FILTERALLAN MORTONREMOVED HOSES, GOT WARDS TO MAKE NEW HOSE, FITTED HOSES, TIGHTENED UP FITTTING ONFILTER LINE

2013-01-24 COOLING SYSTEM - CHANGE FITTING ON AUX WATER PUMPALLAN MORTONREMOVED LINE FROM RAD TO AUX WATER PUMP, CAPT FITTING & PLUG LINE, QUICKLY, REMOVEFITTING & REPLACE WITH NEW ONE, QUICKLY, REMOVE CAP & PLUG AND HOOK LINE UP TO FITTING,QUICKLY, CLEAN U COOLANT, FIT DASH BACK TOGETHER, BOLT DASH BACK

2013-01-23 ENGINE - REPLACED BELTS, BRAKE CHANGEDSTEPHEN BEALREPLACED FAN BELTS, FITTED FAN GUARD, REPLACED LINES ON BRAKE SYSTEM TRACTIONCONTROL VALVE (5 LINES), RUNNING CHECKS IE, FILLING LEVELS, CLEAN WORK AREA

2013-02-02-BRUCE GREENWOODCHECK TO ENSURE PROPER FITTING FOR SYNCRUDE, REMOVE MIRROR FOR WATER TANK, R+RDOOR AND CHANGE HARDWARE TO ALLOW FOR MIRROR ADJUSTEMENT, REMOVE BODY SEAK BACK,REMOVE PLATE, LOCATE AND CUT MATERIAL TO WELD TO PLATE TO COVER HOLES/W CAB, PAINTPLATE DARK ADDITIONAL HOLE, INSTALL AND REPLACE **SRAT**, RUN UNIT AND CLEAN COOLINGPIPE AREA, CHECK FOR LEAKS , TRY TO GREASE LH TRAY CYL, POWER GREASER NOT WORKING

2013-01-25 - FUEL 400L IN UNIT, GREASE POT, FINAL DRIVESALLAN MORTONFILL UP TIDY TANK, FILLED UP UNIT, FIND GREASE POT THAT WORKS, FILL GREASE POT, MOVE UNITTO BAY 3, FILL FINAL DRIVES

2013-01-25 TORQUE CONVERTOR - TEST T/CALLAN MORTONHOOK UP PRESSURE HOSE, START UNIT, CHECK T/C REMOVE EQUIPMENT

2013-01-25 FUEL MACHINE, GREASE POT, FINAL DRIVESSTEPHEN BEALFILLED MACHINE WITH 400 L OF FUEL, FILLED GREASE POT CHECKED SYSTEM, MOVED MACHINEINTO BAY 3 FILLED FINAL DRIVES

2013-01-25 TORQUE CONVERTOR TEST T/CSTEPHEN BEALCHECK BYPASS AT LH PORT TESTED TO BE OK, CLEANED WORK AREA

2013-01-26 CLEANING & POWER WASHED CORRIGALPOWERWASH & CLEAN RDC023, UNDERCARRIAGE, BACK, FRONT, SIDES OF UNIT, MOVE UNIT TOOTHER SIDE OF YARD

2013-01-23- HYDRAULIC LEAKSLARRY JACOBSASSIST INSTALLING HYD HOSES

2013-02-05-STEPHEN CHERRYLOAD UP TOOLS, TRAVEL TO SITE, FLRA, BOOST UNIT, WARM UP, HOT BOX, AIR SWTICH FROZEN,REMOVE, THAW OUT, REASSEMBLE, WALK AROUND,

2013-02-02 INSPECTION - OUTSHEETSTEPHEN CHERRYCOMPLETE INPSECTION, SEE SHEET FOR DETAILS

2013-02-06JIM MACFARLANEPACKED UP SERVICE TRUCK, TRAVELED KMC MILDRED LAKE , STARTED TWO TRUCKS , WARMED ,RETURNED TO SUNCORE, FUEL UP SERVICE TRUCK

2013-02-08 SERVICELEE MEISEKMC HAD A EMECO TRUCK ALRADY IN THEIR LAYDOWN, ASKED ME TO SERVICE THAT 777, CHECKEDOVER UNIT RDC023 IS NOT DUE FOR A SERVICE ONLY HAS 31 HR ON THE OILS AND FILTERS, WAITFOR NEXT 777

2013-02-17-TRAVEL TO MACHINE, CHECK IF RUNNING, IT WAS NOT RUNNING, ORDER WINDOW, TRAVEL TO




EMECO, FOUND WINDOW, LOAD WINDOW, WAS TRUCK

2013-02-18- BROKEN WINDOWGRANT OSMANKMC MORNING MEETING, TRAVL TO ENTRANCE D, WAIT TILL 7:20 FOR PERMIT OFFICE TO OPEN,LOCKS, CHOCKS AND FLRA, REMOVE BROKEN WINDOW, SOME DIFFICULTY WITH THIS AS LOWERHALF OF WINDOW IS INTO RUBBER, LIFT UP NEW GLASS FOUND TOO LARGE, EVEN THOUGHTLABLED FOR 777D, LEFT OLD GLASS IN PLACE LOOSE TO KEEP OUT SNOW, WRAP UP OFF JOB

2013-02-21-CAB , BROKEN WINDOWGRANT OSMANTRAVEL TO KMC WAREHOUSE FROM SITE 111 ROAD AS GLASS CAME IN, LOAD GLASS TRAVEL TOMACHINE LOCK AND CHOCK UNIT, INSTALL NEW WINDOW IN CAB, CLEAN GLASS, TRAVEL BACK TOKMC SHOP AND DUMP PACKAGES AND OLD WINDOW , TRAVEL OFF SITE

2013-03-14- START UNITRAY MURPHYSTART UP UNIT FOR NIGHT SHIFT,

2013-03-16- HYDRAY MURPHYHEAT UP TRUCK, GET UNIT RUNNING, FOUND OPERATOR NOT PUTTING HANDLE DAWN* OLD STYLETRUCK MECHANICAL STYLE LINKAGE

2013-03-27- START UNITSRAY MURPHYRDC023 4R102 40446 HRS W/I175046, RDC29 4R100 28614 HRS W/O175050, RDC46 4R94 20255HR W/O 175070, RDC16 4R91 16257 W/O 175042START UNIT SO BOXES COULD BE CLEAN

2013-03-26-HEAT UNITS START WARMING FOR TRANSPORT TO EMECO SHOP

2013-03-22- INSPECTIONJIM MACFARLANEINSHEET INSPECTIONS , TIRE SURVEY

2013-05-12-ALLAN MORTONPICK UP WATER TANK AND PUT ONTO THE FLOAT

2013-05-13-JAMES PYELIFT WATER TANK INSTALL ON TRAILER, CLEAN UP

2013-05-28- INSPECTIONRAY MURPHYFINISH INSPECTION, CLEAN CAB AND START OUT, GREASE BANK AT REAR

2013-05-30- OUTSHEETJERAMEY SCHMIDEDERPERFORM INSPECTION AND TAKE PICS

2013-06-02- PRODUCT LINKSTEPHEN CHERRYNO CUT DATA LINK PLUG FOUND WIRED IN RADIO TRANSMITTER ONLY, CLEANED CAB , DONE

2013/06/24 ENGINEPIERRE PILOTECUT OFF OLD BRACKET, WELD NEW BRACKET & INSTALL QUICK FILL IN PLACE, INSTALL HOSE INPLACE, CHECK FOR LEAKS, CHECK ALL LIGHTS

2013/06/24 OTHERKEVIN LOWCHECK OVER UNIT, FIX WASHER PUMP, PLUGGED LINES, CRACKED PUMP, BOOST UNIT, REPLACESTEERING TANK CAP, FIX BOX LIGHTS

2013/06/26 HCJERAMEY SCHMIDEDERCHECKED PRESSURES IN ALL SUSPENSION CYLINDERS, ADJUSTED FRONT TO 350PSI DOWN FROM400PSI, REARS WERE GOOD, CHECKED RIDE HEIGHTS ALSO, ALL WERE GOOD, FRONT IS AT 9'CHROME AND REARS WERE AT 42' PIN TO PIN

2013/06/26 ELECTRICALJERAMEY SCHMIDEDERREPLACED RIGHT HAND SIDE FOUR-WAY FLASHER




2013/06/26 OTHERJERAMEY SCHMIDEDERASSIST TECH IN REPLACING SEAT SUSPENSION AIR BAG

2013/06/26 SS EL OTDARREN JEFFRIESSET UP AT UNIT IN LAYDOWN, TROUBLESHOOT WIRING TO RIGHT FRONT MARKER LIGHT, REPLACEDLIGHT ASSEMBLY WITH NEW LED STYLE, CHANGED SURE SEAL CONNECTOR TO DEUSTCH STYLE,INSTALLED CLAMPS ON CROSS OVER FUEL LINE, INSTALLED NEW SEAT AIR BAG ROBBEDFORRDC046. TROUBLESHOOT STEERING ISSUE, FOUND THAT THE OPERATOR HAD BEEN RUNNINGWITH THE SECONDARY STEERING ON

2013/06/27 OTHERDARREN JEFFRIESTROUBLESHOOT BODY UP LIGHT COMING ON WHEN DRIVING, CHECKED WIRING AND CONNECTIONSEEMED OK, NOTICED THAT PIVOT PINS NEED SHIMMED ABOUT 1/2" SIDE TO SIDE, INSPECTEDSTEERING COLMN, COME PLAQUE IN LOCK PIN FOR TILT STEERING, CHECK FOR DRIVERS DOORRATTLE, FOUND STRIKES WORN AND SEALS FOR SIDE WINDOE WORN, REPLACED MISSING BOLTSIN DOOR PANELS

2013/06/28 BRAKEDARREN JEFFRIESDROVE TO UNIT IN SAND PIT, CHECK WITH OPERATOR FOR ISSUE, T/S TRANS FILTER PLUGGED,CHECKED SENSOR AT FILTER HOUSING AND FOUND BROKEN WIRES, REPAIRED WIRING ANDTESTED GOOD, CALLED UNIT UP

2013/06/29 ELECTRICALROB NICOLLETOOK UNIT FOR TEST DRIVE TO FIND PROBLEM, BOX UP LIGHT COMES ON INTERMITTENTLY,CHECKED OVER ELECTRICAL SYSTEM FOR BACKUP LIGHT, ADJUSTED MAGNET BUT STILL COMES ON,BOX NEEDS TO BE SHIMMED TO STAY IN ONE PLACE, CALLED OFF JOB TO GO TO AURORA TO STARTTRUCK, TRAVEL BACKTO MB TO FINISH JOB

2013/06/29 STEERINGROB NICOLLECHECKED SYSTEM FOR LEAKS, TESTED STEERING - OK, CHANGED FILTER, GOT UP UP TO TEMP, TESTDROVE AND COULD NOT FIND PROBLEM WITH STEERING

2013/06/30 FRAMEDARREN JEFFRIESLOADED UP TOOLING AND PARTS, DROVE TO BM , USED GRADER TO LEVEL AREA IN YARD TO WORKON TRACK AND CLEAR MUD, SET UP TRUCK, BLOCKED BOX UP AND USING JACKS REMOVED PIVOTPINS AND RESHIMMED BOX, PUT BOX BACK DOWN AND ADJUSTED THE BODY UP SENSOR, TESTDROVE UNIT AND BODY LIGHT DIDNT COME ON, SET UP TO DROP STRATS DOWN AND RECHARGEBUT GOT CALLED TO ANOTHER UNIT

2013/06/30 FRAMEJIM MACFARLANECHEKCE DUNIT AND SUSPENSION RIDE HEIGHT -OK, LOWERED SUSPENSION DOWN, CARGED WITHOIL, CHARGED WITH NITROGEN TO CONNECT HEIGHT, ADJUSTED AUTO GREASER INJECTORS

2013/06/30 OTHERKEVIN LOWRUN AROUND AND GET MONTH END HOURS OFF UNITS, RESEAL DRIVERS WINDOW, WORK ONSTEERING COLUMN, CHANGE TILT PIN, TRY TO TIGHTEN UP COLUMN SO IT WAS NOT SO LOOSE,COLUMN NEEDS MASTER REBUILD

2013/07/04 ENGINEHARLEY OTTESENCHECK OUT ENGINE LIGHT COMING ON. FOUND LH EXHAUST TEMP ERROR. REROUTED WIRING FORSENSOR AND ORDERED NEW SENSOR

2013/07/06 OTHERHARLEY OTTESENDRILL OUT AND TAP OUT HOLES FOR TIRE STEM GUARDS ON BOTH LH AND RH SIDES REAR

2013/07/06 TYPAUL HICKSTHE LHI TWO WAS FLAT AND HEN THE TIRES WERE REMOVED THE CLAMP WAS MISSING THATHOLDS THE VALVE STEM HOSES IN PLACE. STARTED TO REMOVE THE BROKEN BOLTS

2013/07/07 TYPAUL HICKSTHE VALVE STEM PROTECTORS ON THE RH REARA SIDE HAD TO BE RELOCATED. DRILLED 4 NEWHOLES AND TAPPED THE HOLES AND INSTALLED THE PROTECTION

2013/07/13 OTHER




RAY MURPHYCHECKED LUBE SYSTEM. FUSE BLEW

2013/07/14 OTHERRAY MURPHYCHECK LUBE SYSTEM. DO A SERIES OF TESTS TO TRY TO GET ERROR TO HAPPEN. WORKING FINE.

2013/07/14 OTHERKEVIN LINDSAYASSIST TECH IN DIAGNOSIS AND REPAIR OF AUTO LUBE NOT WORKING AND TAKE PARTS OUT TOMACHINE.

2013/07/29DARREN JEFFERIESESCORT SWT IN TO BASEMINE LAYDOWN. ASSIST THEM TO LOAD UP THERE JACKS WITH THELOADER ( THE BUCKET WAS STUCK ON WHEN THEY TRIED TOPUT THE FORKS ON)ESCORTED THEM OFF SITE.

2013/07/28 SLTYLER MACEACHERNMOVED RIG MATS IN PLACE FOR TIRE GUY TO COMPLETE TASK OF CHANGING FRONT TIRES. MOVEDTRUCK ONTO PAD

2013/8/01 - 40706 - HYBARRY BROWNCHECK UNIT. FOUND TORQUE CHARGE HOSE LEAKING. UNIT STILL DOWN. COULD NOT GET HOSEMADE

2013/08/01 - 40757 - ELPAUL HICKSCHECKED LIGHTS AND CHANGED CONNECTION ON HARNESS AND LIGHT.

2013/08/01 - 40760 - TRHARLEY OTTESENGETTING PERMITS. CHECKING OUT HYD LEAK. ORDER HOSE.

2013/08/03 - 40762 - OTPAUL HICKSWELDED RH MIRROR BRACKETAND ADJUSTED

2013/08/02 - 40760 - TRHARLEY OTTESENPICK UP PARTS. DRAIN HYD TANK AND CHARGE HOSE. FILL UP HYD TANK. START AND CHECK FORLEAKS

2013/08/03 - 40778 - ELBARRY BROWNCHECK PRESSURE. TOP UP AND CHECK. AC SYSTEM OK. CLEAN CAB FILTER. T/S FOR BLOWER NOTWORKING. NEED NEW RESISTOR. TIGHTEN AC BELT

2013/8/04 - 40797 - ELHARLEY OTTESENREPAIR HEATER. PICK UP PARTS AT FINNING

2013/08/10 - 40867 - HYPAUL HICKSTRAVELED TO UNIT TO DO A REPAIR ON LH MIRROR. NOTICED A LEAK COMING FROM THE HMU.ORDERED NEW HMU.

2013/08/13-40867-SSHARLEY OTTESENPICKING UP PART, REMOVING GUARDS AND STARTING TO RE HMU VALVE

2013/08/14 - 40867 - SSKEVIN LOWCHANGE HMU. RUN UP, CEHCK FOR LEAKS. FIX HEALIGHTS OUT, CHECK OVER UNIT.

2013/08/14 - SSMARK FORANREMOVE HMU FROM MACHINE. CALLED AWAY FROM MACHINE

2013/08/15 - 40867 - SLTYLER MACEACHERNFILLED STEERING TANK WITH AST30. CHECKED ALL LEVELS

2013/08/15 - OTJOHN HOLLOWAY




TRAVELED TO BM TO CHECK HYD HOOKUP FOR WATER TANK

2013/08/15 - 40867 - OT ELMARK FORANEXCORTED JOHN IN AND OUT TO INSPECT HOW WATER TANK WAS MOUNTED. REPAIR BROKENLIGHTS ON BOX. INSTALL NEW LIGHTS, NOT WOKRING PROPERLY

2013/08/16PETE ST GEORGEGO TO BASE MINE AND REMOVE WATER TANK HOSES FROM ROC 02, GO TO THOMPSON BROTHERSYARD WITH HOSES AND HELP THEM INSTALL HOSES AND HOOK UP WATER TANK ON THEIR UNIT1088. GO BACK TO SHOP UNLOAD SERVICE TRUCK AND PUT TOOLS AWAY

2013/08/22 - 40885 - HYKEVIN LOWPICK UP PARTS AT FINNING. WAIT FOR HOSE. CHANGE HYD HOSE. REWIRE BOX LIGHTS, MOD TOREWIRING. CLCEAN UP LAYDOWN, BLOCKING AND PLATES, CHALKS

2013/08/22 - 40884 - HYJIM MACFARLANEFRONT BRAKE COOLING RETURN LINE LEAKING. CLEANED OUT TANK AND ORDERED PARTS

2013/08/26 - TR - 40886JIM MACFARLANETRAVELLED TO FINNING FOR PARTS. WAITED FOR PARTS TO BE PICKED UP . TRAVELLED TO SITE.ROAD CONDITIONS ARE VERY BAD. INSTALLED A NEW ACTUAL GEAR INDICATOR SWITCH ANDJUMPER HARNESS. STARTED UNIT AND THERE WERE LEAKES FOR OIL LEVEL AND FILTER SENSORS.MACHINES HAD BEEN WASHED. CLEANED SENSOR PLUGS AND LEAKES WENT AWAY. TESTED TRANS,OK.

2013/08/29 - OT - 40899HARLEY OTTESENREPAIR HORN. $50.00 TRAVEL

2013/08/28 - EL - 40897REPAIRING TAIL LIGHTS

2013/09/07 - EL - HYKEVIN LINDSAYDIAGNOSED AND REPAIRED WIRING FOR LIGHTS. DIAGNOSED AND REPAIRED HYD OIL LEAKS.

2013/10/21 EL-41360KEVIN LOWCHANGE AIR PRESSURE SENSOR. CHECK CODES, STILL HAPPENING, GAUGE ERRACTIC. CHECKWIRING TO ALL ECM'S AND CLEAN PLUGS. MEETING AT SHOP WITH PRESIDENT.

2013/0/18 EL-41025 PEIRRE PILOTMADE UP BRACKET AND MONT BACK IN PLACE. START DOING WIRING HARNESS. REMOVE BACK OF

CAB. ASSIST TIRE GUY WITH MOVING RX048 AND RDC076

2013/09/18 EL-41025JOHN AKITISREMOVE DASH PANEL FOR ACCESS TO SWITCHES. REMVE FRONT CAB PANEL FOR ACCESS TORUNWIRING THROUGH.

2013/09/19 EL-41025KEVIN LOWINSTALL B/N LIGHTS, RUN WIRING, REMOVED AND INSTALL PANELS. CHANGE OUT FUEL SENSOR.CHK OVER.

2013/10/18 EL-41360KEVIN LOWT/S AIR PRESSURE PROBLEMS. CHK WITH GAUGE AIR PRESSURE CHK WIRRING AND PRESSURESENSOR. ORDER NEW PRESSURE SENSOR.

2013/10/16 EN-41357PIERRE PILOTWHEN TO UNIT AND WAIT FOR FUEL. PRIME FUEL SYSTEM AND FIRE UP UNIT.

2013/12/12-EN-41799BRIAN NOSEWORTHYMOVE HOT BOX OVER TO TRUCK. HEATING UP HOSES AND TARP ENGINE. BOOST TRUCK AND START.

2013/12/12-EN-41799EVERETT GREENHAMSET UP HOT BOX. CHARGE BATTERIES. WAIT TO WARM UP. START UNIT




2013/12/12-EN-41299BRUCE OLDFORDHOOK UP PORTA THAW AND HOT BOX TO PRE HEAT. START UP

2013/12/15-EN-41847FRASER GRIFFONGO TO SAND PILE - BRING UNIT BACK TO LAYDOWN

2013/12/15-EN-41854DONALD RAITHBYSTART AND WARM UP CHECK CODES # 2 ING NOT FIRING (LOW VOLTAGE) CHECK HARNESS - NOISSUES - SPOTTED. SUGGEST REPLACING DOWN SHIFT SOLONOID HIGH VOLTAGE- FOUND PINPULLED OUT IN HARNESS INSTALLED. OK AT THIS TIME

2013/12/15-EN-41847CHRIS THORNEMOVE UNIT FROM SANDPIT TO LAY DOWN

2013/12/16-EN-41847CHRIS THORNELOOK UP PARTS AND AVAILABILITY. GET PARTS ORDERED

18-Dec-2012 WOC172884 - BI-WEEKLY DEC 18 - JAN 01, 13 40,018BI - WEEKLY DEC 19 - JAN 01, As per discussion with Chris McNeil & Julio, these won is to be closed.30/4/13 CC13

4-Dec-2012 WOC169954 - BI-WEEKLY DEC 05 - DEC 18, 12 40,018BI- WEEKLY DEC 05 - DEC 18, 1As per discussion with Chris McNeil & Julio, these won is to be closed.30/4/13 CC2

21-Nov-2012 WOC167061 - BI-WEEKLY NOV 21 - DEC 04, 12 40,018BI-WEEKLY NOV 21 - DEC 04 - 2As per discussion with Chris McNeil & Julio, these won is to be closed.30/4/13 CC012

6-Nov-2012 WOC163760 - BI-WEEKLY NOV 07 - NOV 20, 12 40,018BI-WEEKLY NOV 07 - NOV 20, 12As per discussion with Chris McNeil & Julio, these won is to be closed.30/4/13 CC

23-Oct-2012 WOC160708 - BI-WEEKLY OCT 24 - NOV 06, 12 40,018BI-WEEKLY OCT 24 - NOV 06, 12As per discussion with Chris McNeil & Julio, these won is to be closed.30/4/13 CC

9-Oct-2012 WOC157252 - BI-WEEKLY OCT 10 - OCT 23, 12 40,018BI-WEEKLY OCT 10 - OCT 23, 12As per discussion with Chris McNeil & Julio, these won is to be closed.30/4/13 CC

OCT 11/12- PIERRE P

FIRE UP TRUCK AND BRING TRUCK TO NORTH GATE

OCT 14/12- MICHAEL SEABORNE

DRAIN WATER PUMP FOUND THAT MACHINE WAS MISSING FUEL FILLER CAP TAPPED UP FILLER NECK ORDERED NEW CAP

OCT 15-12 AARON C

PERFORM INSHEET, DEFECT LIST, OIL SAMPLE, TIRE REPORT

OCT 15-12 TRAVIS GRUNERUD

TAKE OIL SAMPLES, ASSIST WITH INSHEET INSPECTION

OCT 16/12- MICHAEL SEABORNE

REMOVE INJECTION DOVER AND DRAIN WATER OUT OF SYSTEM

25-Sep-2012 WOC154855 - BI-WEEKLY SEPT 26 - OCT 09, 12 40,018




BI-WEEKLY SEPT 26 - OCT 09, 1As per discussion with Chris McNeil & Julio, these won is to be closed.30/4/13 CC2

11-Sep-2012 WOC152803 - BI-WEEKLY SEPT 13 - SEPT 26,12 40,018BI-WEEKLY SEPT 13 - SEPT 26,1As per discussion with Chris McNeil & Julio, these won is to be closed.30/4/13 CC2

29-Aug-2012 WOC150596 - BI-WEEKLY AUG 29 - SEPT 12, 12 40,018BI-WEEKLY AUG 29 - SEPT 12, 1As per discussion with Chris McNeil & Julio, these won is to be closed.30/4/13 CC2AUG 30/12- BARRY BROWN

REPLACE PRESSURE GUAGE

15-Aug-2012 WOC148702 - BI-WEEKLY AUG 15 - AUG 28, 12 40,001




BI-WEEKLY AUG 15 - AUG 28, 12

AUG 19/123- PIERRE PILOT

TALK TO SYN TO GET WATER TRUCK IN LAYDOWN THEY SAY THAT THEY DO NOT HAVE TIME BUT ICAN GO GET IT MYSELF ASK TYLER TO GIVBE ME A RIDE TO TRUCK BRING 2DC023 IN LAYDOWNAND BRING NORTH AMERICAN WATER TRUCK AND BRING IT TO THE LAYDOWN

AUG 19/12- ROB NICOLLE

DID OUTSHEET , DRAIN FUEL FROM TRUCK INTO CLEAN CUBE, START TO INSTALL QUICK FILLSYSTEM


CLEAN OUT CUBE TO PUT FUEL INTO DRAIN FUEL INTO CUBE, REMOVE QUICK FILL SYSTEM, PUTFUEL BACK INTO TANK FROM CUBE, DID INSHEET REPORT , REMOVE EMECO DECALS, REMOVED NOOPERATOR SIGN


LOAD TOOLS IN SHOP TRUCK, DRIVE TO SITE, INSTALLED ALL PARTS FOR FAST FILL, MADE UNIT#'S, REMOUNTED STAND IN CAB FOR WATER TANK CONTROLLER CLEANED CAB, INSTALLEDNUMBERS ON GRILL AND REMOVED OLD UNIT NUMBERS INSTALL NO OPERATOR SIGN, REPAIREDREAR MARKER LIGHTS, HOOKED UP WASH TRAILER AND BROUGHT BACK TO SHOP, BACK FILLEDWATER AND FUEL, NEED PROPER FILLING TO INSTALL ON GREASE TANK FOR FAST FILL

AUG 20/12- JERAMEY SCHMIDEDER

SOURCE AND ORDER PARTS FOR UNIT


PERFORM TO TIRE INSPECTION, FINDA ALL FITTING WENT TO NIS TO PICK UP FITTING AND WENTTO FINNING TO PICK UP BOSS, WENT BACK TO AURORA WELD NO BOSS AND INSTALL QUICK FILLFITTING IN PLACE, WENT TO CYN TO TRY AND FIND FITTING TO HOOK UP TO FIR TRUCK SYNMENTIONED THAT THEY DO NOT NEED TO HOOK UP TO TRUCK FOR NOW


GET FITTING FROM SHOP, MAKE UP AND WELD ON BRACKET AND HOOK UP QUICK FILL FORGREASER START DOING OUTSHEET FIND OUT AM/FM RADIO DID NOT WORK, START T/S RADIO BUTBEEN PULL OUT AND SENT TO ABION

AUG 21/12- ROB NICOLLETESTED ELECTRIC FOR AM/FM NO POWER, ELEC FOR AM/FM WAS A MESS WIRING ALL OVER GOING

HERE AND THERE FOUND 12/24 INVERTER BEHIND CAB REPAIRED IT FOR NO POWER , REPAIREDMAIN WIRING HARNESS FOR RADIO RADIO NOW HAS POWER BUT NO SOUND NEED TO GETANOTHER AM/FM AND TRY IF NOT ITS THE SPEACKERS THAT ARE NOT WORKING


LOAD TOOLS IN SHOP TRUCK, DRIVE TO SITE, TESTED SPEAKERS NFG ORDERED NEW ONES ANDRICHARD PICKED THEM UP @ FINNING , INSTALLED SPEAKERS IN TRUCK AM/FM WORKS NOW,WATER IS COMING IN FROM RIGHT DOOR SEAL FLOOR IS VERY VERY WET CAB SMELLS LIKEMILDEW NEED TO REPLACE SEAL AND CHANGE OUT FLOOR MAT RPAIRED LIGHT FOR TRANSNEUTRALIZER SWITCH, INSTALL NEW LIGHT BULB IN LIGHTING PLANT, WASHED FLOORS INTRAILER, CLEANED WASHROOM, CLEANED UP ALL GARBAGE HAD TO PRESSURE WASH TRUCK ANDTHE START OF SHIFT BECAUSE IT WAS COVERED IN MUD

AUG 23/12- DON PELLERIN

DROVE TO SITE, MET UP WITH MECH , BEEN SWAPPED OUT WITH PIT TOUR, MOVES TRUCK UPCLOSE TO REACH US, PAINTED OVER OLD # STUCK ON NFN # UNDERNEATH REPOSITIONEDTRUCKS, PAINTED OVER OLD # STUCK ON NFN ONES, SWAPPED TOOLS OVER

AUG 24/12- RUDY DAVID

GATHER UP PARTS NEEDED AT THE SHOP, REMOVE BACK OF CAB INSTALL PARK BRAKE SOLONIODAND ALL WIRING TEST SYSTEM ALL OK


PAINT OVER OLD UNIT NUMBERS, INSTALL NEW UNIT NUMBERS, CLEAN UP C-CAN CLEAN OUTTOOLS AND GARBAGE FROM SHOP TRUCK FOR CROSS SHIFT , SHOW DON AROUND MINE

31-Jul-2012 WOC146706 - BI-WEEKLY AUG 01- AUG 14, 12 39,903




BI-WEEKLY AUG 01- AUG 14, 12

21-Jul-2012 WOC178426 - FIRE SUPRESSION RECERT 40,037PERFORM 1200HR FIRE SUPRESSION INSPECTION

FEB 02, 13 - LEVITTE - JOPY L / TMSFIRE SUPPRESSION PM, 1200 HRS. INSPECTED ALL COMPONENTS ON SYSTEM, BLEW LINES, REPAIRED CAPS, FOUND DAMAGED METRON, REPLACED. TESTED DETECTION.

17-Jul-2012 WOC144470 - BI-WEEKLY JULY 18 - 31, 2012 39,988BI-WEEKLY JULY 18 - 31, 2012

JULY 19/12- KEVIN LINDSAY

DRIVE TO AND FROM SHELL MRM ONSITE AND WAIT FOR ESCORTS CHECK CAUSE OF WATER TANK NOT SPRAYING ENOUGH WATER, FOUND WORN PUMP NEEDS SUCTION HOSE REPLACED REMOVED WATER PUMP AND TOOK IT TO SHOP


DISASSEMBLED WATER PUMP AND INSPECTED AT SHOP WAS OK REASSEMBLED IT, DROVE TO AND FROM SHELL MRM AND ONSITE & WAIT FOR ESCORTS INSTALLED WATER PUMP BACK ON TO UNIT REMOVED SUCTION HOSE FROM UNDERSIDE OF BOTTOM OF WATER TANK

JULY 21/12- DARREN JEFFERIES

LOADED UP PARTS DROVE TO ALBIAN AND WAITED FOR AN ESCORT TO THE LAYDOWN REASSEMBLED THE TRACK AND HAD TO GET A HOSE FROM THE TANK AT OUR SHOP, INSTALLED HOSE ON THE UNIT, GOT THE TRACK FILLED WITH WATER AND TESTED THE OPERATIONS


DRIVE TO AND FROM SHELL FOR MACKAY YARD AND WAIT FOR ESCORT TWICE REPAIRED CAUSE OF WATER PUMP DOES NOT PUMP ENOUGH WATER TO RUN ALL SPRAY HEADS AT THE SAME TIME, FOUND HOLES ON MAIN WATER SUCTION HOSE REPLACED HOSE WAITED FOR OPERATOR TO FILL WATER TANK, CHECKED OPERATION WAS OK, NOTIFIED CUSTOMER IS READY FOR WORK

4-Jul-2012 WOC142398 - BI WEEKLY WORK ORDER 39,87404/07/12 to 17/07/12

JULY 5/12 - JOE A

TRAVELED TO ALBIAN MRM, WAITING FOR THE WATER TRUCK TO SHOW UP, FOUND OUT TRUCK WAS OUT OF FUEL, ESCORTED TO THE TRUCK LOCATION, BOOST BATTERY, GIVE A HAND TO FORT MCKAY MECHANIC TO PRIME FUEL SYSTEM AND START ENGINE, REMOVED AND REPLACED WATER JET SOFT VALVE, AND MAIN RELEIF VALVE, TEST WATER JET CONTROL, BUT RUN OUT OF WATER

JULY 9/12 - JOE A

TRAVELED TO ALBIAN MRM, FORT MCKAY GROUP LAYDOWN, FINISHED UP WATER TRUCK, PIVOT LINE FROM CANNON PILOT OIL TO WATER, JET CONTROL VALVE

JULY 11/12 - DANNY H

DROVE AND INSPECTED UNIT, FOUND HOSE LOOKING FOR R/SIDE HOIST CYLINDER, LOOKED UP HOSE ON 515 AND DROVE BACK TO FINNING AND HAD HOSE MADE, DROVE BACK TO UNIT AND INSTALLED, STARTED UNIT AND RECHECKED FOR LEAK, ALL OK

JULY 16/12 - JOE A

TRAVELED TO ALBIAN MRM, FORT MCKAY LAYDOWN AND TROUBLESHOOT WATER TRUCK PUMP, FOUND OUT WATER PUMP LOW PRESSURE, NOT ENOUGH VOLUME OF WATER TO SUPPLY 4 JETS, CHECK BOTTOM OF WATER TANK FOR ANY ROCK OR MUD BUT HALF FULL OF WATER, NEED TO CHECK THE WATER OUTLET BEFORE REPLACE WATER PUMP

20-Jun-2012 WOC140155 - BI-WEEKLY WORK ORDER 39,874Bi-Weekly Work Order 20-06-12As per discussion with Chris McNeil & Julio, these won is to be closed.30/4/13 CC to 03-07-12

20-Jun-2012 WOC140153 - BI-WEEKLY WORK ORDER 39,874




Bi-Weekly Work Order 20-06-12As per discussion with Chris McNeil & Julio, these won is to be closed.30/4/13 CC to 03-07-12

JULY 1/12 - MARK F

1000 HR SERVICE, SHORT FILTERS, CHECK OILS IN MORNING

JULY 1/12 - DARREN J

SET UP AT UNIT AND STARTED 1000 HR SERVICE, CLEANED UP, DROVE BACK TO SHOP ANDUNLOADED

JULY 1/12 - DARREN F (KEL-MAK)

PERFORM 2000 HR SERVICE

JULY 1/12 - STEPHEN C

FLRA, COMPLETE 1000 PM INSPECTION, SEE SHEET FOR DETAILS

JULY 2/12 - MARK F

FINISH SERVICE 1000 HR SERVICE

JULY 2/12 - DARREN J

COMPLETED 1000 HR INSPECTION SERVICE AND INSPECTION

19-Jun-2012 WOC140052 - CHECK PARK BRAKE UPDATE 39,874CHECK FOR CORRECT VALVEE IN PARK BRAKE UPDATE

5-Jun-2012 WOC137899 - BI-WEEKLY JUN 06 - JUN 20, 12 39,815BI-WEEKLY JUN 06 - JUN 20, 12As per discussion with Chris McNeil & Julio, these won is to be closed.30/4/13 CC

JUNE 18/12- DAN HEINE

WAIT FOR WATER TRUCK TO SHOWUP AT LAYDOWN PULL OFF E BAY AND CHECK SYSTEM , UNIT DOESN'T HAVE SOLENOID SYSTEM BUTTON BACK UP AND CALL UP TRAVEL BACK TO SHOP

22-May-2012 WOC135039 - BI-WEEKLY MAY 23 - JUNE 05, 12 39,830




BI-WEEKLY MAY 23 - JUNE 05, 12

MAY 23/12- REMOVED RELIEF VALVE FROM WATER TANKER IN YARD, HEADED TO SIDTE CALLED ANDWAITED 30 MIN FOR ESCORT, STARTED AND CHECKED MACHINE TALKED TO FMCG MECHANIC, ANDRELIEF VALVE IS BAD, RELIEF VALVE THAT I REMOVED WWAS WRONG ONE HEADED BACK TO YARDTO GRAB OTHER RELIEF, INSTALLED RELIEF ON MACHINE ABUT COULD NOT CHECK NO WATER ANDCOLD NOT FIND PROPER FITTINGS, FMCG WILL RUN AND CHECK

MAY 25/12- KEVIN LINDSAY

LOAD UP TOOLS DRIVE TO AND FROM SHELL ON SITE WAIT FOR EXCORT TAKE FORT MACKAYORIENTATION DRIVE TO MACHINE, REPAIRED LEAKING PIPES AND WENT WITH OPERATOR TO FILLUP WATER TAK TO CHECK FOR LEAKS HAD TO WAIT 3 HOUSRS FOR OPERATOR TO COME. FOUNDLOOSE OPIPES AND OPERATOR WAS USING THE ON/OFF SWITCHES WRONG

MAY 26/12- KEVIN LINDSAY

DRIVE TO FINNING AND WAIT FOR PARTS DRIVE TO SHELL NORTHGATE WAIT FOR ESCORTSREP;ACED HOSE ON REAR PF WATERTANK UNIT IS UP

JUNE 1/12- JIM MACFARLAN

CHECK UNIT BELT WAS BROKEN AND ALTERNATOR BEARINGS ROUGH ORDERED PARTS, TRAVELLEDTO CUMMINS AND PICKUP ALTERNATOR, TRAVELLED TO FINNING AND WAITED FOR A NEW BELTRETURNED TO THE MACHINE AND INSTALLED THE PARTS TESTED OK 27V, RETURNED CORE TOCUMMIN RETURNED TO SHOP STANDBY TIME

JUNE 2/12- KEVIN LINDSAY

DRIVE TO AND FROM MACHINE, AT SHELL MRM AND WAIT FOR ESCORTS, CHECKED CAUSE OF SPRAYNOZZLES NOT SHUTTING OFF FOUND UNABLE TO MAINTAIN A STEADY PRESSURE IN THE WATERPUMP SPRAY NOZZLES PILOT SYSTEM


DRIVE TO MD FROM SHELL MRM ON SITE WAIT FOR ESCORTS DIAGNOSE CAUSE OF REARSPRAYERS WENT SHUT OFF STILL NEED TO DO FURTHER DIAGNOSIS


DRIVE TO AND FROM SHELL ON SITE AND DIAGNOSE CAUSE OF WATER SPRAY NOZZLES WON'TSHUT OFF AT HIGH IDLE, REMOVED CLEANED AND SHECKED OPERATION OF SOLENOID VALVES ONPILOT SIDE, SOLENOID VALVES OK, REPAIRED WIRING TO SOLENOID VALVES, DISSASSEMBLEDAND CLEANED NOZZLES REPLACED RELIEF VALVE ON SOFTNER BLOCK HAD TO BE USED A USEDONE. DID NOT HAVE NEW ONE. WAITED FOR OPERATOR TO FILL TANK WITH WATER. ADJUSTEDPRESSURES AT HIGH IDLE YOU CAN SHT OFF THE PUMP BUT SOME OF THE NOZZLES STILL LEAKREALLY BADLY SUSPECT THEY NEED TO BE CHANGED YOU CANNOT OPERATE THE NOZZLESINDIVIDUALLY


DRIVE TO AND FROM SHELL ON SITE AND WAIT FOR ESCORTS DIAGNOSED AND ORDERED PARTS,REPAIRED NOZZLES WON'T SHUT OFF AT HIGH IDLE SITLL NEED TO REPAIR NOZZLES WON'TOPERATE INDIVIDUALLY PARTS ORDERED

13-May-2012 WOC134140 - BRAKE AND STERRING TEST 39,815BRAKE AND STERRING TEST AFTER REPLACING STEERING PARTS

8-May-2012 WOC133781 - BI-WEEKLY MAY 09 - MAY 22, 12 39,811




BI-WEEKLY MAY 09 - MAY 22, 12

MAY 16/12-=RICARTE VALIENTE

TIRE INSPECTION

MAY 14/12-DALE BEAUCHAMP

OUTSHEET INSPECTION

MAY 14/12-STN STEWARTREPAIR WIRES FOR WATER SPRAY BAR, CUT SHEET LIST, INSTALL EMECO DECALS, REPAIR GREASELINES LEFT REAR STRUT, TIE UP LINES

MAY 14/12-BRUCE GREENWOOD

ASSIST WITH DIAGNOSTICS ON SPRAY BAR, START WITH ELECTRICAL REPAIR

MAY 14/12-P ST. GEORGE

TOP UP HYD AND MOVE UNIT OUT, GET MAN LIFT AND ADD WATER IN TANK, TEST WATER TANKSYSTEM, BLEND HYD SYSTEM FOR PUMP FUNCTION, TEST BRAKE SYSTEM

MAY 14/12-HOWARD MAMMER

DID BRAKE CHECK, CHECKED WATER PUMP OPERATIONS, PUMPED GOOD BUT WATER VALVESWOULD NOT SHUT OFF, CHECKED HYDRAULICS TO VALVE, BLEED LINES OF AIR AND VALVESSTARTED WORKING EXCEPT#4 CHECKED WIRING VALVE AND FOUND BROKEN WIRE.

MAY 15/12- LARRY NGUYEN

CAB DETAIL , REMOVE GARBAGE, SWEEP FLOOR, WIPE DOWN, WINDOWS, DASH, SEAT COVERCARDBOARD FLOOR MATE

3-May-2012 WOC133340 - BACK CHARGE WASH 39,748WASH MACHINE QTM3532

MAY 04, 12 - MELVIN BUTLERBRING 777 INTO WASHBAY. WASH EXTERIOR OF 777 USING CANON. WASH ALL COMPONENTS. DEGREASE ALL COMPONENTS. REMOVE FROM WASHBAY AND CLEAN WASHBAY.

MAY 08, 12 - MELVIN BUTLERWASH UNDERCARRIAGE OF WATER TRUCK FOR REPAIR. CLEAN WASHBAY AFTER REMOVING TRUCK.

24-Apr-2012 WOC132282 - BI-WEEKLY APR 25 - MAY 08, 12 39,723BI-WEEKLY APR 25 - MAY 08, 12

22-Apr-2012 WOC132060 - 1200 HOUR FIRE SUPPRESSION PM 39,748carry out 1200 hour fire suppression pm service

10-Apr-2012 WOC131079 - BI-WEEKLY APR 11 - APR 24, 12 39,743BI-WEEKLY APR 11 - APR 24, 12As per discussion with Chris McNeil & Julio, these won is to be closed.30/4/13 CC

APR.16.2012-DAN H CONT WITH DEFECT LIST PULL APART DASH TO CHANGE LIGHTS,WRONG LIGHT WERE ORDERED.ORDER RIGHT ONES. CHECK AND REPAIR OIL LEAK,CHECK LIGHTS

APR.24.2012-DAN H REPAIR HEATER CONTROL,FIX WIRING AT BACK OF KNOB IN CAB

29-Mar-2012 WOC129259 - BI-WEEKLY MAR 28, - APR 10, 12 39,432BI-WEEKLY MAR 28, - APR 10, 1As per discussion with Chris McNeil & Julio, these won is to be closed.30/4/13 CC2

16-Mar-2012 WOC126959 - HOSE BURST AND STARTED FIRE 39,432hose burst and started a fire

14-Mar-2012 WOC126559 - BI-WEEKLY MAR 14 - MAR 27, 12 39,725




BI-WEEKLY MAR 14 - MAR 27, 12

MAR 15, 2012 - DAN HEINETRUCK HAD CAUGHT FIRE WHILE HAULING. ENGINE PRE LUBE SUCTION HOSE PLUGGED UP. HOSEIN PRESSURE LINE AND A COOLANT LINE. TAKE PHOTOS AND LOOK UP PARTS.

MAR 18,2012-DAN HCHECK RESTORATIVE FOR CHECK VALVE.THERE IS SUPPOSED INTO BE ONE. PULL SPENT PUMPLOOKS OK FOR THE MOST PART.ALTHOUGH THERE IS MARKING FROM AEROTION.REASEMBLED ANDPUT IN COLD STORAGE TEST.

MAR 17,2012- DAN HCAUGHT FIRE.GET PARTS AT SHOP MISSING ONE.DRIVE TO FINNING AND WAIT FOR REAR.DRIVE TOSITE PULL PERMIT TOW IN. PULL HIMSELF OFF OF T RUCK FIND ONE MORE THAT NEEDS TO BECHANGED BEFORER FILLING WITH COLLANT. ORDER AND PICK UP AT MAIN GATET.BACK TOMEPHONE AND INSTALL.CALL FOR OIL AND COLLANT,. START TRUCK CUSTOM FLUIDS TOPPEDUP.MOVE BARRICADES AND MOVE TRUCKS OFF BACK RPL TO LAYDOWN.AFTER LETTING TRUCK RUNFOR A BIT FIND THAT THE PRELUDE PUMP IS HOT HOTTER THAN ANG OIL PAN CHECK POWER ANDMAKE SURE MOTORIST AND TURNING.PULL PUMP OFF NOTEY START AND RUN TRUCK PUMP INTURNING. GET OIL DRAINED OUT OF ENG AND FILTERS CHAINED PULL OFF PRELUBE .CAP LINESAND TURN OFF PRELUBE IN ET START AND CHCIK DRIVE OFF SITE.

27-Feb-2012 WOC123807 - BI-WEEKLY FEB 29 - MAR 13, 12 39,707BI-WEEKLY FEB 29 - MAR 13, 12

MAR 8, 2012 - MARK FINSPECTED TURBOS, CHECKED TURBOS FOR HEAT ABD BOOST, PUT COMPUTER ON MACHINE, COULD NOT FOND ANY PROBLEMS. OIL DRAIN ON OIL PAN LEAKING BOTH BOLTS ARE STRIPPED HOLDING VALVE

MAR 8, 2012 - KEVIN LINDSAYCHECK CAUSE OF NO POWERCHECKED ENGINE OVER, CHECKED PRESSURES, TURBOS, AIR FILTERS AND AIR INTAKE LINE. PERFORMED CYLINDER CUT OUT TEST ALL OK. FOUND OIL LEAK ON OIL PAN AT DRAIN VALVE. ORDERED GASKET AND HELICOIL.

MAR 9, 2012 - MARK FREPAIR OIL DRAIN BOLTS.LEFT SHOP HEADED TO SUNCOR. DRILL HOLES OUT AND PUT HELI COILS IN CALLED LEDCOR TO FILL WITH OIL.

14-Feb-2012 WOC122281 - BI-WEEKLY FEB 15 - FEB 22, 12 39,473BI-WEEKLY FEB 15 - FEB 22, 12

FEB 16, 2012 - DAN HEINEBROKEN GREASE LINE, VENT CAB.REPLACE LOUVRE VENT IN CAB. CHECK BROKEN GREASER LINE, PULL BROKEN FITTING OUT OF STRUT. ORDER PARTS.

FEB 17, 2012 - DAN HEINEBROKEN GREASE LINEINSTALL NEW FITTING ON STRUT. HOOK UP GREASE LINE.

FEB 22, 2012 - DAN HEINEBROKEN GREASE LINEWAIT FOR TRUCK TO COME IN. CHECK GREASE LINES, TAP PUT HOLE AND PUT NEW FITTING IN , TIGHTEN HOSE. SEND TRUCK TO WORK.

FEB 25, 2012 - DAN HEINEWINDOW WON'T GO UP.CHECK UNIT, WINDOW WON'T ROLL UP. PULL OFF DOOR PANEL AND DIASSEMBLE WINDOW REGULATOR. SPRING IN HANDLE HAD BROKEN, LOCKIUNG UP HANDLE. PULL OUT SPRING AND REASSEMBLE. HAD TO WIRE UP HANDLE TO KEEP WINDOW CLOSED. ORDER PARTS AND CALL UNIT UP.

1-Feb-2012 WOC120418 - BI-WEEKLY FEB 02 - FEB 14, 12 39,070BI-WEEKLY FEB 02 - FEB 14, 12

FEB 6, 2012 - KEVIN LINDSAYENGINE OIL LEAKCHECKED ENGINE OIL LEAK. FOUND LEAK AT RIGHT FRONT CORNER OF ENGINE. WHERE FUEL PUMP MOUNTS TO REAR OF FRONT COVER. DID NOT SHUT UNIT DOWN THERE IS A LEAK BUT STILL OK TO RUN UNTIL PARTS COME IN. NOTIFIED CUSTOMER.

24-Jan-2012 WOC118692 - REPLACE THERMOSTATS 38,938




replace thermostats

JAN 30, 2012 - DAN HEINECALL TRUCK IN, WHEN IT SHOWS UP CLIMB UP INTO CAB. UNIT IS CLOWING HOT AIR., R/HLEAVER VENT IS BROKEN. CLOWING ALL THE AIR OUT THAT SIDE. FOUND SMALL KINK IN HEATERHOSE, STRAIGHTEN OUT, OPERATOR SAID MAIN COMPLAINT IS IF TRUCK IDLES FOR TO LING ITCOOLS OPFF. TRUCK IS OLDER AND HAS MECHANICAL FAN. THINK THAT WITHFAN RUNNING ALLTHE TIME TRUCK WILL COOL OFF FASTER.

16-Dec-2011 WOC112246 - INSTALL BOX HEATER SYSTEM 38,253install box heater system

15-Dec-2011 WOC112118 - REPLACE BODY UP SENSOR 38,399replace body up sensor

dec 15, 2011 - JIM MACFARLANECHECKED UNIT AND FOUND THE BODY UP CIRCUIT SWITCH MISSING., CHECK FOR BOX HEATER, ELBOWS NOT INSTALLED.

JAN 2, 2012 - DAN HEINEBOLT UP NEW SENSOR, ADAPT OLD WIRING AND TEST. BOX LIGHT NOT WORKING PROPERLY. CHECK AND TEST WIRING. ALL OK. CHECK NEW SENSOR. SENSOR NO GOD. MAKE SURE BY CHECKING WITH ANOTHER TRUCK. ORDER ANOTHER SENSOR. DRIVE BACK TO SHOP.

JAN 3, 2012 - DAN HEINEFIND TRUCK IN YARD WITH SAME SENSOR AND ROB IT OFF. PUT TAG ON BUMPER. DRIVE TO SITE PULL PERMIT, INSTALL SENSOR AND TEST. HAD TO MODIFY BRACKETS A BUT TO LINE UP MAGNET. CHARGE L/R STRUT AS IT IS LOW. CHECK OVER, FIND CRACK ON FUEL TANK CAP. SHOULD BE CHANGED. ORDER PARTS, BUT THEY ARE THREE DAYS AWAY.

JAN 4, 2012 - DAN HEINEROB CAP OFF UNIT IN YARD. INSTALL ON UNIT ON SITE.

5-Dec-2011 WOC110460 - INSTALL BLOCK HEATERS 38,254install block heaters

DEC 5, 2011 - INSTALL BLOCK HEATERS

DEC 6, 2011 - DAN HEINEPARTS MIX UP. GET TO SITE DRAIN CIILANT. INSTALL BLOCKHEATERS. FILL COOLANT BACK UP. RUN TRUCK CLEAN UP. UNLOAD TOOLING AT SHOP.

17-Nov-2011 WOC108114 - OUT SHEET 38,242check machine over

NOV 2011 - OUT SHEET

NOV 17, 2011 - KEVIN LOWOUT SHEET AND TIRE INSPECTION. TROUBLESHOOT WASHER PROBLEM.CHANGE WIPER SWITCH

4-Nov-2011 WOC106359 - REPAIR REAR WHEEL GROUP 38,243




REPAIR RIGHT REAR BRAKE GROUP. STEEL PLATES ARE ALL WARPED. REPLACE BEARINGS ANDGEARS AS NEEDED INFINAL DRIVE

NOV 4, 2011 - REPAIR RIGHT REAR BRAKE GROUP

NO DATE - MICHAEL BINSTALL DISK AND FIBER DISK AND SEALS IN BRAKE GROUP. INSTALL PISTONS

NOV 14, 2011 - PETE/HENRYINSTALLED O-RINGS ON BRAKE HUB. INSTALLED HUB ON SPINDLE. INSTALLED OUT CONE ANDRIMS GEAR. ADJUSTED SHIMS ACCORDING TO PROCEDURE. LOCKTITE AND TORQUE BOLTS.INSTALLED PANETORY COVER. HOOK UP HYD LINES. INSTALLED RIGHT INNER TIRE AND TORQUED.CLEANED UP. FULED UP LOADER.

NOV 13, 2011 - ROBINSTALLED 2 BRAKE GROUP ON SPINDLE AND TORQUED BOLTS. INSTALLED DUO CONES ON BRAKEGROUP. INSTALLED BOWING.

NOV 13, 2011 - PETETOOK APART BRAKE HOUSING FOR INSPECTION. FOUND RUST ON BRAKE HUB AND BETWEENHOUSINGS. CLEANED EVERYTHING UP. RESEALED BOTTOM PLATE. INSTALLED FRICTION DISC ANDDAMPNER. MANUALLY RUBBED OIL INTO FRICTION PLATES TO PREVEN PREMATURE WEAR.INSTALLED PISTON ASSEMBLY ONTO HOUSING AND TORQUED ALL BOLTS TO 230 FTLBS AS PERPROCEDURE. CLEANED UP AREA.

NOV 13, 2011 - KEVIN LOWCLEAN WHEEL HUB. INSTALL NEW BEARING RACES IN WHEEL HUB. INSTALL DUO CONE SRALRETAINER WITH NEW O-RING. INSTALL NEW DUO CORE SEAL IN WHEEL HUB

NOV 12, 2011 - PETEHAD TO DISASSEMBLE BRAKE ASSEMBLY TO INSPECT POSSIBLE FLIP SEAL FROM PREVIOUS SHIFT.ONCE DIASSEMBLES FOUND WATER AND RUST INSIDE SPRING CAVITIES. CLEANED EVERYTHINGAND REMOVED ALL RUST. FOUND 1 INNER SPRING (PART #9D-6135). CAN'T GET ONE FOR A FEWDAYS. FOUND MULTIPLE NICKS ON SEALS (NO PARTS IN A FEW DAYS). TOLD TO REASSEMBLE UNITAS IS WITH EXISTING SEALS AND MISSING SPRING BY SUPERVISOR. LUBE UP SEALS ASSEMBLEPISTON ASSEMBLE TO HOUSING AND TORQUE NUTS TO 220 FT/LBS AS PER PROCEDURE.INSTALLED BAG OVER UNIT ON BENCH TO KEEP DUST OUT.

NOV 11, 2011 - PETEWENT THROUGH THE PARTS FOR THE WHEEL ASSEMBLT. WRONG BEARINGS WERE ORDERED. DIDSOME DIGGING AND FOUND THE PROPER NUMBER. ORDERED PROPER BEARINGS. CHECKED OFFALL RECEIVED PARTS. SOME PARTS STILL NOT RECEIVED AND SOME WERE NOT ORDERED.OPRDERED EVERYTHING THAT IS NEEDED.

NOV 7, 2011 - DALE BPRESSED PINS OUT OF PLANETORY GEARS HAD TO GRINF ANGLE ADAPTER OFF OF PRESS BASEPLATE AND CLEAN UP PLATE TO FIT PLANETARY IN. CLEAN PARTS. PICK UP PARTS FROM FINNING.HAD TO MAKE 2 TRIPS TO AVOID WAITING ALL NIGHT FOR THEM TO PIXK PARTS. TOOK INVENTORYOF PARTS. STILL WAITING ON SOME SEALS, 1 BEARING CUP AND 1 DUO CONE AND PARTS FORPLANETARY. PLATES AND DISCS ARE HERE. 16 PLATES WERE ORDERED, ONLY NEED 14. DAMPERSWERE NOT ORDERED - NEED 2 7D3-13.

NOV 3, 2011 - GHISLAINCOOKED THE BEARING CUP OUT OF HUB. DISASSEMBLED/STRIPPED WHEEL GROUP COMPLETELYAND WASHED ALL PARTS, INCLUDING DISCS. VERY LITTLE PARTS CAME IN. ALIGNMENT OF PIECESARE MARKED WITH LETTERS. HAD PROBLEMS, NEVER DONE A COMPLETE WHICH LEAD TO SLOWERPROGRESS. HAD TO CHARE THE CRANE, STANDSTILL ONCE IN A WHILE.

NOV 3, 2011 - JERAMEYFLIPPED BRAKE GROUP OVER & USING CRANE SET ON BLOCKS. REMOVED NOTS TO RELEASESPRING TENSION.

NOV 7, 2011 - JERAMEYINSPECTED F/D ASS'Y FOR DEFECTS AND OPENED PARTS FOR A COMPLETE REBUILD. GOUND GEARSTO HAVE SOME PITTING AND SOME INDENTATIONS. MARKED FAULTY AREAS WITH YELLOW PENTOLD BILL AND IT WAS DECIDED TO ORDER AND REPLACE ALL 3 PLANET GEARS.

NOV 15, 2011 - PETE/KEVINCHANGE OUT PLANETARY WITH REBUILT EXCHANGE . INSTALL OILD PLANETORY COVER ON REBUILTHUB. REPLEACED TRI VALVE. REPLACE STUDS, AIR UP TIRE. FILLED DIFF AND PLANETARY. TOP UPHYD. PARK UNIT BY TIRES.

NOV 14, 2011 - GLADIATORASSIST PIERRE WITH HUB ASSY INSTALLATION.

DEC 3, 2011 - DON PMOVED PARTS AWAY FROM DRIVER ASM. BROUGHT DRIVER IN SHOP. MOVED DRIVER TO EMPTY




BAY. MOVED PARTS TO EMPTY BAY. PULLED CARRIER OFF. READ INSTRUCTIONS.

DEC 14, 2011 - SORTED OUT PARTS. SEARCHED FOR PLANETARY SHAFTS. FOUND SHAFTS ANDCLEANED THEM UP. FOUND HAD SURFACING COMING OFF SHAFTS. ORDERED NEW SHAFTS.CLEANED UP AND COVERED PARTS.

DEC 17, 2011 - GLADIATORASSEMBLE FINAL DRIVE. NEEDS AXLE AND OIL.

2-Nov-2011 WOC106067 - REPAIR LEAKING WHEEL GROUP 38,238REPAIR LEAKING WHEEL GROUP RHS

NOV 2, 2011 - REPAIR LEAKING WHEEL

NOV 1, 2011 - GHISSTARTED WASHING DUALS, RAN OUT OF WATER. PUMP WAS PATCHED TO RUN. FIGURED IT OUT AND WASHED MUD AND OIL OUT OF TIRES.

NOV 2, 2011 - GHISREMOVE WHEEL GROUP OF RT REAR. DOES NOT SEEM TO BE ANY PARTS FOUND NO POLY TO COVER PARTS UP SO WE MOVED IT INSIDE. UNTIL FURTHER INSTRUCTIONS. NUTS ON MOUNT WERE TOO MUCH FOR US, NEEDED A HEAVIER MECHANIC. PRESSURE WASHED UNIT AND CLEANED UP PAS BEFORE STARTING JOB.

NOV 2, 2011 DALE BREMOVED HUB AND BRAKE ASSY FROM RR. BROUGHT PARTS INSIDE AND INSPECTED. MADE PARTS LIST FOR ALL SEALS AND BEARINGS.

NOV 2, 2011 - CARLASSED EXTRA JACK STAND UNDER THE TRUCK TO ENSURE STABILITY. WASHED. DRAINED PLANETORY GROUP. PULLED APART AND REMOVED HUB. REMOVED BRAKE GROUP. COULDNT FIND THE ROLL OF PLATCIE SHEETING SO WE MOVED ALL THE PARTS INTO THE SHOP.

OCT 31, 2011 - PETENEED WASH TRAILER TO CLEAN TIRES. FUELD UP PARTS TRUCK. WASH UP TRAILER BROUGHT IN WASH BAY. FILLED WATER TANK JUST OVER HALF. PRESSURE WASH LINES IN WASH TRAILER. DIDNT USE UNIT. DISCONNECT PARTS TRUCK AND PARK IT. LEFT TRUCK IN WASH BAY FOR NOW. WASH TIRED FROM UNIT RDC007.

NOV 3, 2011 - DALE BPICKED UP PARTS, HELP GHIS WITH DISASSEMBLY. NOT ALL PARTS ARRIVED.

NOV 15, 2011 - KEVIN LOWINSTALL NEW PLANELARY. INSTALL AXLE AND COVER. FILL DIFF AND FINAL DRIVE, TOP UP HYDRAULIC OIL. CHANGE OUT 10 WHEEL STUDS THAT WERE DAMAGED. PARK TRUCK IN BACK OF YARD.

NOV 16, 2011 - KEVIN LOW/LARRY JINSTALL OUTTER R/H REAR TIRE, AIRED UP AND TORQUED.

29-Oct-2011 WOC105688 - REPAIR STERRING SYSTEM 38,242REPLACE BALL STUDS

OCT, 2011 - REPLACE BALL STUD

OCT 31, 2011 - PETESTARTED CHANGING STEERING CYL BALL STUDS. CHANGED OUT LEFT ROD END BALL STUD. CHANGED OUT RIGHT ROD END BALL STUD. TORQUE BOTH BALL STUDS TO 100 FT/LBS. CLEANED UP AREA. FUELD UP WELDING TORCH. FUELD UP SHOP LOADER. WENT TO OTHER YARD TO MOVE EQUIPMENT AND AIR UP RDC053.

NOV 1, 2011 - PETECLEANED PAD.. BROUGHT UNIT TO SHOP. REMOVE RIGHT HAND BARREL BALL STUD. INSTALLED NEW ONE. TORQUE TO 1000 FT.LBS. HAD TO USE OLD NUT, DIDNT HAVE NEW ONE.

NOV 1, 2011 - GHISLAINREMOVE LEFT BALLSTUD. INSPECT USED PART. REUSED STUD AND INSTALLED NEW RACES. USED STUD WAS IN GOOD CONDITION. TORQUED NUT TO 1000 FT/LBS AND INSTALLED COTTER PIN. FINISHED ASSEMBLY RT BALL STUD. HOOKED UP GREASE LINES. HOOKED UP HYDRAULIC LINES WITH NRE O-RINGS. TOP UP POWER STEERING OIL.

29-Oct-2011 WOC105690 - WINTER PACKAGE 38,238WARDS INSTALL WINTER PACKAGE

28-Oct-2011 WOC105640 - 250 SERVICE 38,242




service unit

OCT 29, 2011 - 250 HR SERVICE

NOV 1, 2011 - PETECLEANED UP PAD OUTSIDE BAY 2. BROUGHT UNIT TO SHOP. FINISH UP SERVICE, OIL FILTER &FUEL FILTERS. DID REMAINING RUNNNING CHECKS.

28-Oct-2011 WOC105643 - B/S TEST 38,241check brakes and sterring

OCT 2011 - B/R TEST

OCT 28, 2011 - GHISLAINMEASURED BRAKE CALIPERS AND ROTORS. RECORDED. PRINTED OUT PROCEDURES ON SIS. PRESSURE CHECKS AND STALL TEST DONE. STEERING LINKAGE CHECKED. FOUND STUDS ON CYLINDER ARE WORN OVER .040". ROD END 0.25-0.030 INCHES OF PLAY. RECOMMEND REPAIRS TO CYLINDER BALL STUDS.

23-Oct-2011 WOC104903 - REMOVE WATER TANK 38,241REMOVE WATER TANK TANK AND INSTALL TRAY

OCT 21, 2011 - REMOVE WATER TANK.

OCT 28, 2011 - GHISHOOKED UP GREASE LINES TO GLIDERS AND BOX PINS. PUMPED GREASE MANUALLY THROUGH LINES AND BEARINGS TO MAKE SURE IT WAS NO PLUGGED. HOOKED UP BOX ELECTRICAL. STARTED TRUCK WENT TO EDGE OF YARD AND DUMPED WATER OUT. FUNCTIONED THE BOX, LIGHTS ALL WORKED.

OCT 28, 2011 - DALE BHELPED GHIS INSTALL ROCK EJECTORS AND PERFORM BRAKE/STEER TESTS.

OCT 28, 2011 - PETEREMOVE WATER TANK AND INSTALL ON BLOCKS IN OTHER YARD. INSTALL DUPM BODY ON UNIT. PIN UP REAR HINGES AND INSTALL KEEPERS. PIN UP HOIST CYLINDER AND INSTALL COUPLERS. MOVE UNIT TO MAIN YARD. CLEAN UP OTHER YARD. STARTED HHOK UP ELECTRICAL.

OCT 28, 2011 - DERRICKTOOK REQUIRED TOOLING. HELPED MAMMOET WITH SET-UP. LEFTED WATER TANK FROM BACK OF UNIT - KNOCKED OUT PINS. HAD TO REMOVE 1 CLAMP TO LET "BIG" WATER LINE SAG. DROVE TRUCK OUT FROM UNDER WATER TANK. BACKED TRUCK UNDER ROCK BOX WHILE SUSPENDED BY CRANES. INSTALLED BOX HINGE PINS. INSTALLED HOIST CYL PINS. PULLED IOFF TO GO BACK INTO RDC054.

OCT 26, 2011 - PETE/SCOTTTIE UP ROCK EJECTORS. TIE UP PLUMBING AT REAR. DISCONNECT AND TIE UP PLUMBING AND ELECTRICAL AT FRONT. REMOVE PANEL FROM CAB ANC STORE IN COUNTER. TIE UP HOIST CYLINDER. REMOVE BOTH UPPER HOIST CYL PINS. ALL PARTS ON BUMPER. MOVE ALREADY TO OTHER YARD AND GET PLUMBING READY. CUT WELD OFF DUMP VALVE LEVER AND HOOK UP ROD. WAITING FOR CRANES TO REMOVE TANK.

OCT 25, 2011 - DON PMADE FITTING TO PUT VACCUMN ON TANK. MARKED AND DISCONNECTED HOSES. TIGHTENED QUICK COUPLERS. TIED UP HOSES. CLEANED UP. HOOKED UP REALY QUICK COUPLERS. PUPPSUPLY HAS A MALE END THAT IS MARKED YELLOW ON HOSE AND TANK. RETURN HAS MANIFOLD ATTACHED AND ON TANK IS A SHORT HOSE CAPPED. BLUE CYLINDER END OF CONTROL CYLINDER ON HYD TANK. ORANGE - ROD END OF CONTROL CYLINDER ON HYD TANK. YELLOW-FILTER CLOSES TO HYDRAULIC TANK. GREEN- RETURN MANIFOLD.

22-Oct-2011 WOC104828 - IN SHEET 38,238IN SHEET INSPECTION

OCT 22, 2011 - INSHEET

OCT 22, 2011 - AARON CSTART INSHEET, TAKE PICTURES.

OCT 21, 2011 - DON PDROVE UNIT INTO WASH BAY. WASHED TIRES AND HANGERS, TEST PORTS. MEASURED TIRES, DOCUMENTED ASSET # ON TIRE SURVEY SHEET. CLEANT TEST PORTS. GOT SET UP TO PULL SAMPLES. PULLED ENG, TRANS, HYD, STEERING, HUBS, FINALS, DIFF OILS. FILLED OUT SAMPLE SHEETS. PULLED LONER PLUG OUT OF WP AND OPENED. LOWER TANK DRAIN, TURNED ON PUMP. PARKED OUTSIDE.

9-Oct-2011 WOC103201 - BALL STUD 38,225




REPLACE LH INNER STEER CYL BALL STUD

OCT 9, 2011 - REPLACE L/H INNER STEER CYL, BALL STUD - DAN HEINE

OCT 9, 2011 - WATER SENSOR, BALL STUD - DAN HEINEINSTALLED WATER SENSOR IN TRUCK. CHECK SUTOMER COMPLAINT OF BALL STUD MOVEMENT.L/H INNER CYL IS CLUNKING. CUTOMER SUPPLIED PARTS. START TO INSTALL. THE SUPPLIEDBEARING HAD WRONG MATED HALVES. INSTALL NRE BALL STUD WITH OLD BEARING, TORQUE UPAND GREASE. FIND OF SHIFT, IF CUSTOMERS MECH CAN DOUBLE CHECK PLAY BEFORE CALLING UPAS THERE WAS NO ONE LEFT TO RUN UNIT.

6-Oct-2011 WOC102891 - GPS INSTALL 38,205NSTALL ENGINE OIL PRESSURE SWITCHINSTALL PARK BRAKE PRESSURE SWITCH

OCT 06. 11 - INSTALL GPS - DANROUND UP PARTS AND FITTINGS. DRIVE TO SHARKBITE TO WORK ON UNIT. FIND IT HAD BEEN MOVED FROM SITE TO JACKPPINE, GO TO JACKPINE. WAIT FOR ESCORT, SIGN IN AND TRAVEL TO UNIT IN MINE. INSTALL GPS, CALL AND CHECK ACTIVATION, TRAVEL BACK TO LAYDOWN. WAIT FOR ESCORT OUT.

OCT 29, 2011 - PETEREMOVE REAR PANEL BEHIND CAB. REMOVE STERO PANEL. FOUND OLD GPS UNIT BEHIND RADIO. REMOVE OLD UNIT AND REPAIR ALL EXPOSED WIRING. BUTTON UP PANEL. INSTALLED PLUGS WITH SILICONE IN WALL BEHIND SEAT. INSTALL REAR PANEL.

23-Aug-2011 WOC00680 - PERFORM OUTSHEET 38,032PERFORM OUTSHEET INSPECTION

AUG 22, 11 - DARRENLOOKED AROUND SHOP FOR FITTINGS FOR GREASE SYSTEM. HAD TO GO TO NIS AND PICK UP SOME FITTINGS. BUILT A GREASE HOSE FOR SYSTEM AND SET GAUGE FOR GREASER PRESSURE.

AUG 22, 11 - AARONSTART OUTSHEET.

22-Aug-2011 WOC00682 - 1200 HR F/S RECERT 38,032PERFORM 1200 HR F/S RECERTIFICATION LEVITT TO PERFORM

AUG 22, 11 - LEVITTE1200 HR PM. METERED PANEL, BLEW NITORGEN THROUGH LINES. CLEANED AND TESTED IRS AND DAFS. CHECKED NOZZLES AND HOSES. VERIFIED ENGINE SHUTDOWN. CHECKED PORTAGLE EST. CHECKED ACTUATOR HEAD. CHECKED PULL STATION.

17-Aug-2011 WOC00631 - INSTALL WATER TANK 38,027




INSTALL WATER TANK AND CHECK OPERATION

AUG 13, 11 - REWIRED/REPAIRED ELECTRICAL SYSTEM FOR WATER TANK HOOK UP - MIKE SWENT THROUGH ELECTRICAL SYSTEM. FOUND THAT ALL WIRES FROM WATER TANK CONTROL PANELIN THE CAB HAD BEEN CUT AND ARE DAMAGED. REMOVED DAMAGED WIRING FROM HARNESS.INSTALLED NEW WIRES AND INSTALLED A CAT PLUG ON WIRING HARNESS THAT ALLOWS HARNESSFROM CONTROL BOX TO BE UNPLUGGED FROM ELECTRICAL PANEL. SOURCED ALL HOSES, WIRES,ETC. SO THAT INSTALLING WATER TANK ON TRUCK WILL RUN SMOOTHLY. TAGGED EACH HARNESSCONNECTRO ON TRUCK AND WATER TANK. CLEANED WORK AREA.

AUG 15, 11 - GLADIATOR, MIKEMAKE STRAPS TO STABILIZE BOX CYLINDER.

AUG 17, 11 - GLADIATOR, MIKEINSTALL WATER TANK, REMOVE BOX HARDWARE (PINS GREASE LINES ELECTRICAL).

AUG 18, 11 - INSTALL WATER TANK - AARON, RONBRING INTO SHOP. INSTALL LIFT CYLINDER PINS AND ALL PIN RETAINERS. HOOK UP WIRING FORTANK. HOOK UP HYDRAULICS FOR TANK. BUILD AND INSTALL GREASE LINES FOR PUMP. INSTALLROCK EJECTORS. REPAIR TANK LIGHTS. REPLACE BROKEN CONVEX MIRROR. INSTALL MIRRORASSEMBLY. REPAIR GREASE LINES. REPLACE 2 MARKER LIGHTS. PARK TRUCK OUTSIDE. PUTAWAY ALL TOOLING. CLEAN BAY.

AUG 18, 11 - RICHARDPREP AND CLEAN UP FOR CRANE WORK. CRANES ARRIVED AT 11:30 AM. REMOVED STUBBORN PINON BOX. RMOVE DUMP BXO AND PLACE ON BLOCKS. LIFT WATER TANK ONTO TRUCK. INSTALLBACK PINS. LOCK TABS NOT IN PLACE.

AUG 19, 11 - DARRENWENT TO TEST THE OPERATION OF THE WATER TANK BUT PUMP WOULD NOT WORK. ENGINEWOULD LOAD UP BUT PUMP WOULDN'T TURN. REMOVED THE MOTOR FROM THE PUMP, IT WORKEDFIN. TRIED TO TURN THE PUMP OVER BUT WAS SEIZED. REMOVE THE PUMP FROM THE TRUCK WITHSHAWN. FOUND THE PUMP WOULD SPIN FREELY. STILL DISASSEMBLED AND INSPECTED WASRUSTY BUT NO SIGN OF WHAT WAS KEEPING THE PUMP FROM SPINNIN, REASSEMBLED PUMO.

AUG 19, 11 - SHAWNWELDED UP BOX LEVER INTO NEUTRAL POSITION. REMOVED WATER PUMP FROM TRUCK. SPLITWATER PUMP, CLEANED ALL CRAP OUT OF IT. RESEAL AND PUT BACK TOGETHER.

AUG 19, 11 - AARON, DALEINSTALL WATER PUMP ON WATER TANK. HOOK UP FLANGES. HOOK UP LINES. HOOK UP HYDMOTOR. HOOK UP GREASE LINE. RUN TO TEST, PUMP TURN, NO WATER TO TRY SPRAYING. CLEANUP TOOLING.

AUG 21, 11 - FILLED TANK WITH AROUND 500 LTRS OF WATER. STARTED TRUCK UP, DID A PASS INYARD WHILE TESTING. FOUND ONCE YOU TURN PUMP ON ALL HEADS SPRAYED WATER, EVEN WITHSWITCHES IN OFF POSITION. READ UP ON SYSTEM , CHECKED SCHEMATICS. WENT THROUGHWIRING IN CONTROL BOX. IT WAS OK. CHECKED 4 SOLONOIDS, FOUND NO POWER TO 2 . FIXEDWIRE PROBLEM, NOW ALL 4 SOLONOIDS ON AND OFF WORK.

AUG 22, 11 - AARON, CALETEST WATER NOZZLES TO SEE IF THEY SHUT OFF. FOUND #1 NOZZLE WORKED BACKWARDS,SWITCHED WIRING AROUND ON SOLINOIDS. ONLY WAY TO SHUT OFF NOZZLES IS TO PRE SELECTWHICH NOZZLES YOU WANT OFF BEFORE YOU TURN PUMP ON. THEY WILL NOT SHUT OFF WHILEPUMP IS ON.

QTM2579 IS THE QOUTE #

16-Aug-2011 WOC00621 - REPAIR BATTERY CABLES 38,028REPAIR BATTERY CABLES REPLACE ENDS AS NEEDED

AUG 15, 11 - GHISREMOVED BATTERIES, REMOVED BATTERY CABLES. WENT OT NIS AND PICKED MATERIALS. USED210 CABLE FROM PARTS ROOM. ASSEMBLED ALL CABLES. WASHED BATTERIES AND CHECKED, OK. INSTALLED CABLES ON MACHINE AND BATTERIES. ASSEMBLED GREASE LINE ON ENGINE IDLER.

14-Aug-2011 WOC00596 - VALVE SET 38,027CHECK VALVE LASH

AUG 14, 11 - VALVE AND INJECTOR SET - CARL, RICARTECHECKED VALVE CLEARANCE. THEY FELL WITHIN SPECIFIED RANGE. CHECKED INJECTORS, ALL HAD TO BE ADJUSTED.

14-Aug-2011 WOC00594 - CRACK ON OIL FILTER HOUSING 38,027




Found that the engine oil filter housing has a small crack that is leaking oil. Change out engine filterhousing and install new o rings as required

AUG 14, 11 - ENGINE LEAK AT WIGGINS FITTING - GHISUNSCREWED WIGGINS, PUT NEW TEFLON ON. HEARD A SNAP BEFORE THE WIGGINS GOT TIGHT.FOUND A CRACK ON THE SIDE FO WIGGINS HOUSING. NOTIFIED LAND AND FOREMAN. TRIED APART NUMBER, FOUND AN HARNESS. SIS SAID IT DID NOT EXIST. LEAD HAND SAID HE WOULDTAKE CARE OF IT. PULLY GREASE LINE LEAKING. DISASSEMBLE LINE SEIZED IN ELBOW. BROKEOFF A BENT ELBOW. REMOVED ALL. FOUND ONE 90 DEGREE ELBOW. GET GREASE FITTERS TOINSTALL TOMORROW.

13-Aug-2011 WOC00569 - REPLACE LEFT OUTER TIE ROD END 38,027REPLACE LEFT HAND SIDE OUTER STEERING CYLINDER TIE ROD END

AUG 12, 11 - TORQUE OVERHEATING, AUTO GREASER - GRANTPACK UP TOOLS, AIR LINES AND PARTS. SIGN OUT AT AC & T AND TRAVEL FROM AURORA TO SUNCOR. SIGN IN AT TRAX AND AUX. GET PERMIT, HAD TO GO TO "D" AND GET PERMIT AS STEEPBANK CLOSED. 1. 50 MIN AND 30 KM DRIVE. TRAVEL TO UNIT, GET CLEARANCE TO ENTER COKE PIT. TALKED WITH OPERATOR, HE SAID TEMP NEEDS JUMPING. 1/2 TO MAX. TEMPED TORQUE WITH INFR RED GUN AND CHECKED READING ON VIMS. BOTH SAME, CHECK SENSOR AND WIRING. OLD SENSOR WIRING SCRUFFY AND UNTIDY. WILL ORDER SENSOR AND TIDY WIRING AT SAMETIME. GREASE SYSTEM WAS WORKING, OPERATOR SAID WAS EMPTY AT START OF SHIFT. NOTICED HITCH WORN AND HO HOSE ON FUEL TANK VENT. WILL ORDER SENSOR, GET CLEARANCE TO LEAVE COKE PIT. TRAVEL TO ENTRANCE D AND CLOSE PERMIT. TRAVEL OFF SITE.

AUG 19, 1 1- AARONREMOVE OLD BALL STUDS. CLEAR TAPPERED HOLE. INSTALL NEW BALL STUD AAND BEARING WITH NEW SEAL. INSTALL AND TORQUED NUT TO SPEC. INSTALL COTTER PIN. INSTALL CAP AND SNAP RING. HOOK UP GREASE LINE, MANUALLY GREASE NEW STUD. PUT AWAY TOOLING, CLEAN UP BAY.

13-Aug-2011 WOC00573 - RIGHT FRONT WHEEL BEARING 38,027REPAIR FILINGS IN RIGHT FRONT WHEEL BEARINGS

AUG 20, 11 - RON D, AARONREPLACED RIGHT FRONT WHEEL BEARINGS AND SEAL.

AUG 20, 11 - SHAWN, DARRENTOOK TRUCK OUTSIDE. SET METAL PLATE DOWN, LINED TRUCK UP UNDER IT. JACKED TRUCK, REMOVED BOLTS AROUND TIRE. USING FORKLIFT AND PROEPR TOOL, REMOVED TIRE. DRAINED OIL OUT OF HUB. REMOVED COUPLERS. REMOVED BEARINGS. REMOVED HUB. CLEANED SHAFT.

13-Aug-2011 WOC00571 - CAB REPAIRS 38,027




REPAIR DEFECTS IN CAB.DECALS, DASH REPAIRS, WINDOW CRANKS, STEERING WHEEL ADJUSTER,SEAT BELT, HORN, WINDSHIELD WASHER

NOT DATED - OR SIGNEDWINDOW HANDLE, MOST FLUIDS, SOME CHECKS. TORCH GUARDS. SWAPPED OUT ENGINEWIGGINS HOUSING. INSTALL OLE ONE ON ENGINE TRANS PUMP SEA. MANY SERVICE CHECKS TOGO OVER.

AUG 12, 11 - DEFECTS - GHISPICKED UP PAPERWORK. CHECKED DEFECTS. FILLED ORDER SHEETS FOR PARTS. START TRUCK,PULL UP TO DOOR. PERFORMED MINOR DEFECT REPAIRS.

AUG 14, 11 - CAB DEFECTS - GHISREMOVED THE STEERING COLUMN PLASTIC. DIAGNOSES LOOSE STEERING COLUMN. FOUND ADJSCREWS. RIGHT SIDE SCREW WAS SET, LEFT SIDE BACKED UP. REMOVED STUD , INSPECTED/ SCREWED BACK IN WITH BLUE LOCK TITE. BRASS BUSHING, HEAD PART RIDING ON PIN. PUT ALLBACK TOGETHER. REMOVED FRONT DECALS. COULD NOT REMOVE SIDE DECALS. WELDED ON.LADDER NOT TALL ENOUGH TO REACH AND NO ANCHOR POINTS TO TEE OFF TO. INSTALLED EMECODECALS ON DOOR AND ON BACK PART OF BOX.

AUG - GHISFUEL LEAK. REPAIRED FUEL LEAK ON PUMP. REMOVE TUBE, INSTALL NEW ORING. REASSEMBLE .THE TUBE LOOKED CRACKED AT FIRST, SEEM TO BE SEALING.

AUG 17, 11 - REPAIR CAB DEFECTS - MIKE SRE-ROUTED WIRING HARNESS FROM WATERTANK MODULE. CHANGED LIGHT BULB ON MODULEPANEL THAT WAS BURNED OUT. CLEANED APRON AND WORK AREA.

AUG 23, 11 - CAB REPAIRS - GHISREPAIR AIR HOR. DIRT WAS THE PROBLEM REPAIR WINDSHIELD WASHER. REMOVED FRONTCOVER AND INSTRUMENT/DASH INSIDE CAB. HOOKED UP LINES, AIRED UP AND RAN IT. CUT THEOLD ENDS OFF SO THEY WOULD GRAB THE ENDS BATTER. FITTED WASHER. RE & RE SEATBELT.

NOT DATED - RON DREPAIRED RIGHT TERMINAL PLUB ON ALTERNATOR. BATTERYA DN STEERING WARNING, PROBLEMSOLVED.

13-Aug-2011 WOC00572 - REPAIR PANELS AND GAURDS 38,027REPAIR MISSING AND BENT PANELS AND GAURDS

AUG 13, 11 - MIKE LREPAIR FENDER AND FAB MOUNT FOR WATER CANNON.

13-Aug-2011 WOC00578 - REPAIR TRANS COVER LEAKING 38,027REPAIR LEAKING TRANSMISSION COVER LEAKING.

THEY TIGHTENED UP THE BOLTS AND LET IT GO LIKE THAT.NO OTHER INFO.

13-Aug-2011 WOC00570 - REPLACE RAD HOSES 38,027REPLACE RAD HOSES AND CHANGE COOLANT. ALL LOWER AND UPPER HOSE

NOT DATED - AARONBRING IN BARRELS FROM OUTSIDEDRAIN COOLANTSTART REMOVING HOSES TO REPLACE.

NOT DATED - AARON REMOVE BROKEN CLAMP ON OIL COOLER, WELD, REPLACEGO TO FINNING TO GET 5 HOSES MADE. THEY CALLED THAT WERE SHORT ONE FITTING, TOOK OLD HOSE IN SO THEY COULD USE A REUSABLE FITTING, PICKED UP HOSES. STARTED REPLACING HOSE. REPLACE BULBS IN DASH.

AUG 20, 11 - SHAWN, DARRENINSTALL NEW RAD HOSES AND GASKETS ON TOP TWO AND BOTTOM TWO LINES OUT OF RAD. FILLED WITH NEW COOLANT. RAN AND TESTED, NO LEAKS.

13-Aug-2011 WOC00579 - REPAIR AUX DRIVE OUTPUT LEAK 38,027




REPAIR AUXILLIARY DRIVE OUTPUT SEAL LEAKING

AUG 12, 11 - PUMP DRIVE SEALS - GHISINSPECT LEAK, CONSULT FOREMAN, ORDER PARTS. PUT GRIPE TAPE ON DRIVE SHAFT COVERS.PULLED SHAFT OFF AND YOKE. ASSEMBLED ENGINE END.

AUG 14, 11 - PUMP DRIVE SEALS LEAKING - GHISCLEAN UP SHAFT, INSTALLED YOKE. CHECK ON SIS, TORQUED OUT TO 550 FT/LBS. WASHERSWERE REUSED.

AUG 16, 11 - DRIVE SHAFT SEAL - KARLINSTALL AUXILLARY DRIVE SHAFT SEAL. INSTLL DRIVE SHAFT. INSTALL GUARDS.

12-Aug-2011 WOC00565 - 2000 HR SERVICE 38,027




Perform 2000 hr service as required.

AUG 14, 11 - 2000 HR SERVICE - GHISGO THROUGH CHECK LIST. CHECK OFF THE EASY ONE. FOUND SOME DEFECTS. ADDED TO LIST.INSTALLED DECALS, PERFORMED SERVICE CHECKS. CHECK PARTS FOR PARTS, THEY WON'T BE INUNTIL TUES, WED. DO WHAT I CAN. CHECKING BATTERIES, CABLES ARE CORRODED INSIDE THECABLE. CABLE ENDS ALL OVERTIGHTENED. NEED TO CHECK BATTERIS TO SEE IF NEW ONESNEEDED.

AUG 15, 11 - GHISCHECKED FOR CRACKS, BATTERIES, OTHER MISC. CHECKS ON SERVICE SHEET.

AUG 16, 11 - DEFECTS - GHISRE & RE WIGGINS HOUSING. ROBBED ONE FROM A CORE ENGINE. SWAPPED IT OUT WITH RDC023.INSTALLED THE BAD ONE ON CORE. INSTALL HANDLE IN CAB. INSTALL GUARD. HEATED ANDTRIED TO BEND BACK. ENDED UP INSTALLING WITH LONGER BOLTS. TOOK THE ONE FROM RDC030BECAUSE RDC023 DID NOT SHOW UP.

AUG 16, 11 - 2000 HR PM - LEEDRAIN TRANS TANK AND TRANS. REPLACE TRANS FILTERS, CLEAN TRANS MAGNETIC SCREEN.REFILL TRANS WITH PC-TM-13 OIL. DRAIN STEERING TANK. REPLACE STEERING FILTER. REFILLSTERRING WITH PC-TM-13 OIL. NOTE TM-13 OIL WAS FREE. WAS DIRT AND ROCK IN THE TRANSFILTER CANNISTER.DRAIN LEFT AND RIGHT PLANETARY, REFILL WITH 50W OIL. DRAIN DIFF OIL, REFILL WITH 50W OIL.

AUG 16, 11 - 2000 HR PM - GHISSERVICE RE & RE ALL FLUIDS EXCEPT FOR THE HYDRAULICS. DO NOT HAVE FILTERS YET. CHANGEOUT 0.40 CUBES. LOOK FOR MY PARTS IN MORING, GO THROUGH ALL THE SERVICE TRUCKS FORMISSING HYDRAULIC FILTERS.

AUG 17, 11 - 2000 HR SERVICE, SWITCH TO WATER TRUCK - PAULSERVICE AIR DRYER. INSTALL PRIMARY FULE SCREEN. NEW NUMBERS ON AIR FILTERS. CHECKCHARGE SYSTEM, ONE BAD WIRE.

AUG 17, 11 - GLADIATOR, MIKECHECK FOR AND REPAIR LEAKY LINES.

AUG 17, 11 - CLEAN UP LUBE TRUCK - LEE MPULL LUBE TRUCK TO THE BACK OF SHOP. OFF LOAD USED OIL FROM TRUCKREFILL 50W OIL BACK INTO LUBE TRUCK. CLEAN TRAASH OUT OF TRUCK DUE TO 2000HR PM FROMDAY BEFORE.

AIG 17, 11 - 2000 HR PM - GHISFLAG LINES. CLEAN UP PAD FOR NEXT CREW. CHECKOVER WORK ORDER AND CROSS OVER. PACKUP TOOLS.

NOT DATED - MIKE, GLADIATORREMOVE GREASE LINES. REMOVED PINS AND LOCKS. CHECKED FLUID LEVESL TO START MACHINEAND MOVE. UNHOOK GREASE LINES FROM BOX. SET TRUCK UP FOR SWITCH OVER TO WATER TANKON AUG 19. SERVICE AIR DRYER. INSTALL PRIMARY FUEL SCREEN. NEW RUBBERS ON AIRFILTERS. CHECK CHARG SYSTEM, FOUND BROKEN WIRE.

AUG 22, 11 - MIKE, SHAWNHOOK UP GUARD AND FIRE SUPPRESSIION LINES ON RIGHT SIDE OF ENGINE. HEAT UP ANDSTRIGHTEN BELLY ROCK GUARD MOUNTS. STRAIGHTEN TWO BELLY GURADS. MANUALLY GREASEALL FITTINGS. REPARIED 2 REAR GREASE LINES. (BOX PIN REAR RIGHT AND REAR GREASE LINETO REAR LEFT BOTTOM BOX ACCULULATOR. BRAKE PACK TRAVEL, RIGHT REAR = 9.5 MM LEFTREAR = 8.3MM. TRACE AND REPAIR BACK UP LIGHTS. RETORQUE TOP COVER AND INSPECTIONPLATE ON TRANSMISSION. CHANGE STEERING CYLINDER HOSES. CHANGE EMERGENCY STEERINGHOSES. INSTALL PRESSURE GAUGE ON GREASSER.

AUG 22, 11 - AARONDRAIN HYDRAULIC OIL AND TORQUE. REFILL HYDRAULIC TANK WITH NEW OIL. RUN MACHINE,SHUT OFF, RECHECK LEVEL. TIGHTENED BOTH PLUGS, ONE ON TANK AND ONE ON TORQUE. TOOKIN WASH BAY, WASHED OFF ENGINE AREA FROM CHANGING HOSES AND WASHED RAD. TOPPED UPSTEERING TANK.

AUG 23, 11 - MIKE, SHAWNCLEANED CAB. PRESSURE WASHED MACHINE. CHECK AIR CONDITIONING , GOOD 9C. DRIVEMACHINE, TEST ALL FUNCTIONS GOOD. PARK MACHINE IN LOT. LAST MINUTE WALK AROUNDCHECK FOR AND DEFECTS MISSED MACHINE, OK. DISCONNECT WASTE GATE FOR CANYON SO ITCAN'T SPRAY.

AUG 23, 11 - MIKECLEANED CAB. WASHED MACHINE. DID WALK AROUND, CHECKED MACHINE FOR ANY LAST MINUTEDEFECTS. CHECKED AIR CONDITIONING AND VENTS. GOOD TO 9C. DROVE MACHINE, TESTED ALL




FUNCTIONS, GOOD. PARKED MACHINE IN LOT.

NOT SIGNED - AARONWIRES BROKE OFF BACK UP ALARM. REMOVED ALARM, REPAIRED WIRING, REINSTALLED ALARM.REMOVED COOLANT GAUGES, BOTH WERE MISSING THE FLOAT ASSEMBLY. INSTALL NEW COOLANTGAUGES WITH NEW GASKETS.

AUG 21, 11 - SHAWNWORKED FROM 200O HR CHECK LIST. MARKED OFF AND INITIALED ALL I DONE. FILLED UP GREASEKEG ON TRUCK. READ UP A BIT ON HOW THE ELECTRICAL WORKS. FOUND BLOWN FUSE, CHANGEDIT, IT WORKS.

AUG 22, 11 - 2000 HR SERVICE, PREP MACHINE FOR CUSTOMER - MIKE BHOOK UP GUARD AND FIRE SUPPRESSION LINES ON RIGHT SIDE OF ENGINE. HEAT UP ANDSTRIGHTEN, THEN INSTALL 2 BELLY GUARDS, STRIGHTEN ALSO. MANUALLY GREASE ALL FITTINGS.REPARIED 2 LEAKING GREASE LINES, BOX PIN REAR RIGHT. ALSO LINE TO LEFT REAR BOTTOM BOXACCUMULATOR. CHECK BRAKES FOR TRAVEL. RIGHT REAR 9.5 MM, LEFT REAR 8.3MM. RE-TORQUETOP COVER AND INSPECTION PLATE ON TRANSMISSION.

AUG 22, 11 - 2000 HR SERVICE, PREP MACHINE FOR CUSTOMER - GLADIATOR, MIKE BCLEAN CAB. PRESSURE WASH MACHINE. CHECK AIR CONDITIONING. GOOD. DRIVE MACHINE,TEST ALL FUNCTIONS, GOOD. PARK MACHINE IN LOT. LAST MINUTE WALK AROUND, CHECK FORANY DEFECTS MISSED. MACHINE OK.

14-Jun-2011 WOC98978 - WASH 38,028WASH UNIT INSIDE AND OUT

JUNE 14, 11 - LARRYOUTSIDE WASH. PRESSURE WASH ENGINE, BODY, WINDOWS , WHEELS. REMOVE GREASE, OIL SAND, DIRT, EVERYWHERE. CAB DETAIL - REMOVE GARBAGE, SWEEP FLOOR, PUT ON SEAT COVER. WIP DOWN DASH AND WINDOWS.

9-Jun-2011 WOC98497 - IN SHEET 38,027check machine over

COMPLETED BY MIKE S

10-Mar-2011 WOC86655 - TRANY NOT SHIFTING 37,343TROUBLESHOOT AND REPAIR TRANY NOT SHIFTING

MAR 10, 11 - TRANS NOT SHIFTING - RYANOPERATE MACHINE RAN THROUGH GEARS UP TO 4TH, REVERSE WORKED GOOD. INFORMED CUSTOMERCHECK CODES, BELIEVED TO BE OLD. HAD 8 CODES. NEED TO CONNECT ET TO VERIFY.

MAR 11, 11 - TRANS WON'T SHIFT - RYANHEAT MACHINE TO START. CONNECT ET, CLEAN CODES. OPERATED AROUND, GOT UP TO 3RD GEAR AND REVERSSE. ADVISED CUSTOMER TO OPERATE.

5-Mar-2011 WOC91475 - 1200 HR F/S PM 37,2231200 hr F/S pm completed by Levitte.

MAR 5, 11 - LEVITTMETERED PANEL. CHECKED CONTROL HEADS. CHECKED PULL STATIONS. CHECKED HOSES, NOZZLES, FITTINGS, BLEW LINES, VERFIED ENGINE SHUTDOWN. CHECKED PORTABLE EXTINGUISHERS.

18-Feb-2011 WOC84198 - NO ENGINE HEAT 36,866Check levels ,thermostat function etc.

FEB 18, 11 - NO HEAT IN CAB - DAN HHOOK UP NACG HOTBOX AND DRAG UP TO LAYDOWN. TRUCK WAS SHUT OFF AND DUE TO COLD WEATHER NEEDED HEAT. SET UP AND WARMED UP TRUCK. CHECKED FLUID LEVELS, ALL OK. NO WINTER FRONT ON UNIT. GET CANVAS AND INSTALL. START AND WARM UP TRUCK. UNIT HAS HEAT IN CAB. BOTTOM LOUVRE HAD FALLEN OUT AND WAS PUTTING MOST OF THE HEAT ON THE FLOOR. PUT BACK IN. CALL UP. TAKE HEATER BACK TO RUTH LAKE.

11-Feb-2011 WOC83549 - ENGINE LEAK 36,802




REPAIR ENGINE LEAKFOUND OIL PAN DRAIN DAMAGED

FEB 11, 11 - HYD LEAK - PETERTRVEL TO SITE, RECEIVE ESCORT TO UNIT. PERFORMED PRELIMINARY UNIT INSPECTION, FOUNDENGINE OIL LEVEL NOT ON DIP STICK, UNIT LEFT IN R GEAR. T/SHOOT ENG OIL LEAKS, FOUNDSTUMP PANS PUSHED UP CONFINING DRAIN FITTING DAMAGING THREAD. STRAIGHTEN BELLY PAN,NEED SUPPORT BENT BACK. INSTALL FITTING WITH LONGER BOLTS, CALL FOR OIL, HOP FOR THEBEST.

FEB 11, 11 - DRAIN ON OIL PAN BRAKE - FINNINGGET TO UNIT, HOOK UP ET. FOUND ONE HIT OF LOW ENGINE OIL AND ONE OF LOW OIL PRESSURE.CUT FILTER OPEN. FILTERS ARE CLEAN, LOOK AROUND TO FIND LEAK AND FIND OUT THATSOMETHING HIT STUMP PAN, BENT PAN AND PUSHED DRAIN VALVE AND BROKE BOLT.

7-Jan-2011 WOC79779 - MECHANICAL INSPECTION 36,590HELP NAGC DO A 1200HR MECHANICAL INSPECTION

JAN 07, 11 - 1250 HR MAINT INSPECTION - PETERTRAVEL TO UNIT SITE. PERFORM ALL SERVICE MAINT. OBSERVATIONS AND PHYSICAL CHECKS REQUIRED AS PER CUSTOMER PERFORMANCE DATA SHEETS. CLEAN TOOKING AND WORK AREA. TRAVEL BACK TO SHOP.

7-Jan-2011 WOC79628 - HEATER FAN 36,590REPAIR HEATER FAN PROBLEM AT NACG

JAN 07, 11 - T/SHOOT HEATER FAN, NOT WORKING - PETERFOUND HEATER MOTOR TO BE AT FAULT. ORDERED NEW. TRAVEL TO FINNING. PICK UP PARTS. INSTALL ON UNIT. TEST FUNCTION. WORKING WELL AT THIS TIME.

15-Dec-2010 WOC77335 - BACK CHARGE (NACG) 36,584COLD START MACHINE FOR NACG, MECHANIC WAS TOLD TO GO AND START THE MACHINE AND AFTER THAT HE WAS TOLD TO SHUT IT OFF

DEC 15, 10 - KEVIN LCUSTOMER ASKED TO HAVE MACHINE STARTED, HE SAID HE HAD WORK FOR IT. DROVE TO MACHINE, FILLED OUT FLRA, LOCKED AND CHOCKED MACHINE OUT OF SERVICE. BOOSTED MACHINE AND USED ETHER TO GET MACHINE RUNNING. AFTER MACHINE WAS RUNNING, I NOTIFIED CUSTOMER MACHINE WAS RUNNING. HE SAID SHUT IT DOWN BECAUSE IT HAS NOT WORK TO DO.

12-Oct-2010 WOC70504 - HORN DOESN`T WORK. 36,328Repair as required.

OCT 12, 10 - HORN DOESN'T WORK - TONYCALLED OPERATOR AND TOLD HIM 'HORN WAS ON THE FLOOR".

8-Oct-2010 WOC70300 - DASH LIGHT NOT WORKING 36,292DASH LIGHT NOT WORKINGTEMP CONTROL SEIZEDWINDSHIELD WASHER NOT WORKINGBOX LIGHTS, RED, NEED TO AMBERAUTO RETARDER LIGHT AND SYSTEM INOPERATIVELEFT HAND BOX LIGHTS NOT WORKINGLEFT AND RIGHT BOX CUSHION TABS, PLAY ON LEFT, BROKEN TAB ON RIGHT ONETRANS OVERFULLA/C BELT LOOSERHF STRUT IS LOWBATTERY CABLES ARE LOOSEBOX SNUB CONTROL NOT WORKING

OCT 09, 10 - DEFAULT LIST - TONYREPAIR ALL DEFAULT LIST, REFER TO WORK ORDER.

29-Sep-2010 WOC69374 - CHANGE OUT DIFF OIL 36,290Oil sample came back bad and the the oil has to 2000 hr on it

SEPT 29, 10 - CHANGE DIFF OIL - STEPHENDRAIN CENTER DIFF, FOUND METAL (MONITOR ) DRAIN RIGHT PLANETARY/ WAY OVERFULL (MONITOR)

SEPT 29, 10 - CONTINUE OUTSHEET/ FILLED OIL - RICARTEFILLED DIFFS AND FINAL DRIVE WITH OIL AND ENGINE. BRING UNIT OUTSIDE THE SHOP.

25-Sep-2010 WOC68940 - VALVE SET 36,289




adjust valves

SEPT 27, 10 - VALVE SET - STEPHENREMOVE COVERS. CLEAN, LINE UP ENGINE. SET INTAKE/EXHAUST AND INJECTOR. TEST, GOOD ,NO LEAKS.

25-Sep-2010 WOC68936 - REMOVE WATER TANK AND BOX 36,289remove water tank fromtruck install box

SEPT 28, 10 - REMOVE WATER TANK, INSTALL PUMP BOX - STEPHENWASHED ENGINE. BRING TRUCK INTO SHOP. TOOK PICTURE TO MAKE AN INSTALL BOOK. REMOVE AND REROUTED PARTS. REPAIRED 3 ELECTRICAL CORDS. REPAIRED FOR HOLES IN CAB.

SEPT 28, 10 - REMOVE WATER TANK/ INSTALL BOX - STEPHENREMOVE PIVOT PINS. REMOVE TANK. INSTALL BOX. INSTALL PIVOT PINS. INSTALL CYLINDER PINS. CONNECT UP LIGHT/GREASE LINE. TEST/

25-Sep-2010 WOC68937 - DEFECT LIST 36,289repair defects as per list -

SEPT 25, 10 - STEPHENREMOVE FOG LIGHTS. SET UP FOR CRANE/ CLEAR SPOT. BRING OVER BLOCKS. INSTALL LIFTING PINS.

SEPT 26, 10- STEPHENFINISHED CHECKING DEFECT LIST. ORDERED FOG LIGHT LENS AND LEFT INDICATOR ASSEMBLY.

SEPT 27, 10 - DEFECT LIST - STEPHENWENT THROUGH LIST AND DID REPAIRS.

SEPT 28, 10 - DEFECT LIST - STEPHENINSTALL LEFT FRONT INDICATOR LIGHT. SCRAPPED OFF GRAHAM DECAL.

SEPT 28, 10 - OUTSHEET - STEPHENSEE SHEET

25-Sep-2010 WOC68941 - B/S TEST 36,289BRAKE AND STEERING TEST

SEPT 26, 10 - BRAKE AND STEERING TEST - STEPHENVISUAL INSPECTION. PRESSURES INSPECTION. TESTED MOVEMENT. SEE SHEET

23-Sep-2010 WOC68752 - CHECK TIRE FOR LEAK (KAL TIRE) 36,289POSSIBLE WARRANTY-

MACHINE RETURNED TO YARD WITH TIRE LOOSING AIR. TIRES WERE JUST CHANGED IN THE FIELD

COMPLETED

KAL TIRE CAME OVER AND COULDN'T FIND ANYTHING WRONG

22-Sep-2010 WOC68727 - INSHEET AND OIL SAMPLE 36,289INSHEET AND OIL SAMPLES

COMPLETED BY HENRY AND AARON

31-Aug-2010 WOC66408 - FABRICATE MIRROR BRACKET 36,287Fab a more durable mirror bracket. The brakets from Greggs do not hold up for very long. The vibration cracks the supports.

AUG 31, 10- INSTALL CONVES MIRROR AND BRACKET ASSEMBLY - PAULINSTALL MIRROR AND BRACKET ASSEMBLY ON DRIVERS SIDE HANDRAIL AND ADJUST FOR VIEW OF TANK FILL LOCATION.

26-Aug-2010 WOC66036 - L & R REAR TIRE/FRONTS ALSO 36,246L & R REAR INNER TIRES HEAT SEP

DONT HAVE ANY RUN OUT TIRES SO WE ARE GOING TO INSTALL 2 NEW ON THE FRONT, AND THE FRONT PUT ON TE BACK.

23-Aug-2010 WOC65543 - 1750 HR PM 36,285MACHINE AT GRAHAM NEEDS A 1750HR PM

AUG27, 10 - 250 HR SERVICE - KEVINDRIVE TO KAL-TIRE. FILLED FLRA, LOCKED ANC CHOCKED UNIT OUT OF SERVICE. PERFORMED 250 HR SERVICE. R/R/I TIRE IS FLAT AND L/S REAR TIRES MISSING VALVE STEM EXTENSION. KAL TIRE IS GOING TO REPAIR TIRES.




22-Aug-2010 WOC65318 - TRANSFER PUMP/ RH TURBO 36,284REPLACE DEFECTIVE FUEL TRANSFER PUMP AND PUMP

REPLACE RH TURBO

AUG 25, 10 - ENGINE LOW POWER - PAULFUEL TRANSFER PUMP LEAKING FUEL. REPLACE PUMP. #7 CYLINDER HEAD FUEL SUPPLY LINE LEAKING AT FITTING INTO HEAD. REMOVE AND RESEAL. INSPECT AND CLEAN FUEL SCREEN, REPLACE FUEL FILTERS. INSPECT FUEL PRIMING PUMP, CHECK VALVES NOT DISLODGED IN PUMP HOUSING. REMOVE AND CLEAN FUEL REGULATOR VALVE AT FUEL MANIFOLD INSPECT AND CLEAN TORQUE CONVERTOR SCREEN. DO LEAK DOWN TEST ON TORQUE CONVERTOR, OIL DRAINED APPROX 10 LITRES. SPEC 19 LITRES MAXIMUN. REPLACE RH TURBO, L/H TURBO PREVIOULSY REPLACED. MONITOR ENGINE WITH CAT ET. NO BOOST PRESSURE SENSOR. ET IS LOGGING FAULT FOR TURBO BOOST SENSOR. REPAIR HARNESS CONVECTOR TO SENSOR, FAULT SENSOR FAULT CLEARS. TORQUE CONVERTOR STALL TEST, 1580 RPM.

18-Aug-2010 WOC64879 - REMOVE BOX / INSTALL TANK 36,245REMOVE BOX AND INSTALL WATERTANK.

AUGUST 18,10: REMVOED GREASE LINES FROM LIFT CYLINDERS AND BOX PINS. UNHOOKED ELECTRICAL . HELPED MAMOUT RIG UP FOR LIGT. REMOVED LIFT CYLINDERS BOX PINS. PULLED TRUCK OUT OF WAY. BLOCKED BOX UP OFF GROUND. CLEANED UP.

AUGUST 18,10: REMOVE TRAY, INSTALL WATER TANK:INSTALLED WATER TANK ON TRUCK WITH CRANES. SHIMED BOX PNIS INSTALLED PIN RETAINERS. INSTALLED HOIST PINS AD SHIMS AND PIN RETAINERS. HOOKED UP GREASE LINES. HOOKED UP GREASE LINES. HOOKED UP REAR HYDRAULIC HOSES FOR PUMP. STARTED TO INSTALLE CONTROLLER.

AUGUST 19,10: INSTALL CONTROL BOX IN CAB.HOOKED UP ALL ELECTRICAL . REMOVED LIFT LINK FOR BOX AND WELD IN PLACE. INSTALL SOLENOID, PRESSURE LINE AND RETURN LINE. COULDN'T GET #1 TO SPRAY TROUBLESHOOT., REMOVED #1 VALVE. FILL TANK UP WITH WATER FROM BIRCH MOUNTAIN.

18-Aug-2010 WOC64746 - IN SHEET INSPECTION 36,247Tire report -pictures.

AUGUST 20,10: UNIT INSPECTION WITH GRAHAM:RIGHT SIDE REAR TANK AMBER LIGHT NOT WORKING.RIGHT SIDE LADDER MOUNT ON PANE, WELD CRACKED. NO PARK BRAKE LIGHT ON CAB. RIGHT REAR BRAKE, TEST PORT LEAKING. WIND SHEILD WASHER NOT WORKING.4 BALL STUDS AT BOTH RH AND LH TIERODS HAVE WEAR. #8 CYLINDER HEAD, FROST PLUG AT SIDE OF HEAD BETWEEN #6 AND #8 HAS BUILD UP FROM COOLANT LEAKING.

16-Aug-2010 WOC64605 - AUTOLUBE MODIFICATIONS 36,240Autolube grease system leaksRepair wiring in the cab.

AUGUST 15,10: GREASE TANK LEAKING, WIRING HANGING IN CAB, CAB DIRTY:lKMC HUT DOWN FOR FIELD WORK IN MINE. GO OVER TRUCK IN SHOP. CHECK LIGHTS, CAB CLEANED OUT AND SWEPT. REPLACE MISSING MOLDING SCREWS IN DASH. WIRING HANGING FROM HEADLINER PUT BACK IN PLACE. GREASE TANK LEAKING OUT VENT MODIFIED. TANK SO VENT INTO OVERFLOW SO ANY GREASE THAT GETS TOP OF PISTON CAN ESCAPE OUT OVERFLOW. HOSE INSTALLED AND TEE INTO OVERFLOW FITTING. CLEAN UP GREASE ON DECK. 2 BUCKETS FULL. TIDY UP TOOLS.

28-Jul-2010 WOC62456 - 500 HR PM 35,928KMC DID A 500 HR PM AT 35928 HR

24-Jul-2010 WOC62046 - STEERING PROBLEM 35,858TROUBLESHOOT AND REPAIR STEERING PROBLEM AL (FINNING) TO CHECK.

JULY 24,10: NO STEERING:DRIVE FROM EMECO TO BASEMINE. START TRUCK, STEERING IS MOVING BUT HARD TO MOVE. STEERING SEEMED FINE.CHECKED CYCLE TIME FROM LEFT TO RIGHT AND VICE VERSA(UNDER 5 SEC.) SPEC IS 7.CHECK STEERING RELIEF VALVE (2200PSI AT BOTH STOPS) SPEC IS 2200PSIPICK UP TOOLING , CALL UP TRUCK.STEERING IS FINE.TRAVEL TIME TO THE MACHINE.

24-Jul-2010 WOC62036 - HORN PROBLEM 35,832




REPAIR HORN PROBLEMSENT AL FINNING TO CHECK AND DIDNT FIND A PROBLEM, HE JUST SHOWED THE OPERATOR WHERETHE SWITCH WAS.

JULY 23,10: NO HORN - FINNINGDRIVE TO BASEMINE, GET LOCATION OF TRUCK AND LOCATE. GET INTO CAB, NOTICED THE HORN ISON THE FLOOR. GET OPERATOR AND SHOW HIM THE LOCATION OF HORN SWTICH. PICK UPTOOLING , CALL UP MACHINE.

19-Jul-2010 WOC61429 - DEFECTS 35,774Radio falling outSteering tilt knob missingReplace v beltsReplace idler pulley

Auto greaser leakingR/H Fender deck cracked under grease tank.A/C NOT WORKING. CHECK SYSTEM/RECHARGE IF NEEDED.

JULY 18,10: NOTICED SEVERAL DEFECTS ON UNIT.RADIO FALLING OUT NOISY BELTS. ETC:SHUTDOWN AFTER TESTING. TURBO REPAIR. BELTS SQEELING 1 MISSING OTHERS VERY POOR CONDITION AND IDLER PULLEY VERY BADLY GROVED AND WORN.GREASE TANK LEAK. DECK BROKEN UP UNDER GREASE TANK. RADIO FALLING OUT. STEERING ADJ. KNOB MISSING.

JULY 19,10: DEFECIENCY LIST:PAPERWORK FROM THE 18TH. TIME AND SERVICE REPORT. ORDER PARTS TO REPAIR FAN BELTS AND PULLEYS STEERING.

JULY 20,10: DEFECTS LIST, VEE BELTS, STEERING ADJUSTER, IDLER PULLEY, GREASE TANKS AND DECK WELDING: GREASE TANK LOOSE, FLOATING ROUND HANGING A HOSES:REPAIR STEERING TILT ADJUSTMENT. REMOVE IDLER PULLEY AND REPLACE WITH NEW PULLEY AND BEARINGS. REPLACE FAN BLETS, REINSTALL FAN SHROUD. REPAIR ONE SMALL HYD. LEAK AT STEERING CYLINDER JAM NUT LOOSE , ORING FRETTED. RAISE AND PIN BOX FOR LEVITT SAFETY. WELD UP CRACKS IN DECK ON RIGHT FENDER. TVL TO SHOP MAKE UP PLATE FOR GRASE TANK TO SIT ON SWAP TRUCKS AS NEED CRANE AND WELDER. TVL TO KMC YARD. LIFT OF GREAE TANK . WELD UP DECK , REINSTALL GREASE TANK. REMOVE GREASE FROM AROUND AREA. UNPIN BOX AND TEST. CLEAN UP.

JULY 10:NO A/C,RADIO FALLING OUT, STEERING STIFF COMPLAINT, STEAM OFF GREASE ON DECK:TVL TO MACHINE COMPLAINT OF NO A/C., SHUT TRUCK OF CHECK. EVAPORATE FOR ICING UP AS A/C WAS NOT WORKING DAY BEOFRE. NOTICED AUTO RETARDER SWITCH WAS ON AND NOT A/C SWITCH. CHECKED COMPRESSOR CLUTCH ONCE A/C SWITCH TURNED ON FOUND WORKING. COOLED DOWN AND STAY COLD FOR 40 MIN. REPLACED RADIO, POOR WIRING FROM GPS INSTALL HAD DAMAGED RADIO, REPAIR WIRING AS BEST ABLE WITH TOOLS ON BOARD. D.T KIT NOT AVAILABLE OR HEAT SHRICK AND SOLDER. INSTALL NEW RADIO. AND TESTED OK.TEST STEERING NO FAULT WAS FOUND. EMG GOOD. CYCLE TIMES GOOD. TRUCK ELFT DOWN AS KMC TO STEAM GREASE OFF DECK AS GETTING ONTO EXHAUST MUFFLER.

16-Jul-2010 WOC61322 - RECERTIFY FIRE SUPPRESSION 35,775INSPECT FOR CAUSE:TURBO BLOWN-LHS,FINNING TO INSTALLWASHED AND UNLOADED

JULY 19,10: COMPLAIN OF LOW POWER:FOUND L/H FRONT TURBO IS LEAKING OIL AND GOT EXCESS IF PLAY. ORDERED NEW TURBO.

JULY 20,10: WE RECHARGED UNIT # RDC023. EMECO INFORM THAT A TURBO CAUSE FIRE UPON CHECKING . IR BY TURBO. IT WAS FLASHING. METER PANEL, BLEW LINES. REPLACED 3 BOTTLES. RESET HEADS, CHECKED OVER I/R'S . PK, HOSE? WIRE CONNECTIONS, SYSTEM OK, RETURNED TO EMECO HAD BILL SIGNED.

16-Jul-2010 WOC61325 - TURBO LHS SHAFT BROKEN 35,774




TURBO PROBELM. FINNING PIERRE INSTALLED.

JULY 16,10: FIRE SUPRESSION WENT OFF:LOOKED AT UNIT AND IT LOOKED BLACK AROUND LIFT TURBO PULLED BOOT OFF AND FOUND SHAFTHOOD BROKEN.

JULY 17,10:WHEN TO UNIT TO CHANGE TURBO COULDN'T DO IT BECAUSE TRUCK WAS LOADED. TALK TO PAULFROM KMC AND HE WILL CALL US WHEN TRUCK WILL BE UNLOADED.

JULY 18,10: REQUESTED TO START UP UNIT AFTER REPAIR:WENT TO MACHINE.TOP UP COOLANT CHECK OIL START, HAD TO RESET SHUTDOWN ON FIRESUPPRESSION AS WOULDN'T START DUE TO FIRE SUPRESSION SHUTDOWN AND DUST OFF. CHECKTURBO FOR LEAKS.

JULY 18,10: GET TO UNIT AND FOUND OUT THAT UNIT WAS NOT STEAM, CALL FOR STEAM TRUCK,AFTER TRUCK WAS STEAM DRAIN COOLANT AND REMOVE TURBO, OPEN TOP OF AIR TO AIR TOCLEAN IT. PUT AIR TO AIR BACK TOGETHER AND INSTALL NEW TURBO + LUBE. PUT COOLANT BACKIN AND FIRE UP TRUCK, NO LEAK, LET CUSTOMER KNOW THAT FIRE SUPPRESSION WHEN OFF,CUSTOMER WILL TAKE CARE OF IT.

4-Jul-2010 WOC59380 - HOIST PROBLEM 35,580Hoist will not operate properly.

JULY 5,10: HOIST PROPBLEM:DRIVE AND LOCATE MACHINE. CHECK OIL LEVELS WHICH AREGOOD. START TRUCK AND WARM UP HYDRAULICS. PIN BOX, CHECK RELY VALVE (2200PSI) SPEC. IS 2750PSI. ADJUST R-VALVE TO 2750PSI. CALL UP TRUCK AND PICK UP TOOLING.

25-Jun-2010 WOC58451 - REPAIR LEAKS 35,470-TORQUE OUTPUT SHAFT SEAL-TRANSMISSION INPUT SHAFT SEAL-ALTERNATOR DRIVE SEAL-HOSES/O-RINGS ON BACK OF HYDRAULIC TANK

JUNE 25, 10: OIL LEAKS:DRIVELINE, TRANSMISSION,TORQUE CONVERTOR YOKE AND SEALS REMOVED.HYDRAULIC TANK EMPTY. OIL LEAK AT ALTERNATOR ACCESSORY DRIVE REPLACED SEAL AND ORINGS AS REQUIRED. ALTERNATOR BELT REPLACED. REPLACED VALVE COVER GASKET AS #8 CYINDER HEAD. OIL LEAKS AT HYDRAULIC TANK. REPLACED O-RINGS. MARKED WIT PAINT MARKER..JUNE 26, 10:FILL DIFF OIL, CLEANED CAB, WASHED UNIT, FIT COVER OVER DRIVE SHAFT. T/C END AFTER WASHING. OUTSHEET DONE.

23-Jun-2010 WOC58200 - REMOVE WATER TANK/INSTALL BOX 35,470REMOVE WATER TANK FROM UNIT AND INSTALL BOX IN FORT MCKAY YARD.

GROUND FORCE - VERGIL & SHAWN MAMMOET CRANE

-GROUNDFORCE COMPLETED INSHEET AND OUT SHEET

JUNE 13,10: REMOVE WATER TANK> PUT DUMP BOX ON:DISCONNECTED, CAPPED/PLUGGED HYUDRAULIC LINES ON WATER TANK.DISCONNECTED, CAPPED PLUGGED HYDRAULIC LINES ON WATER TANK. DISCONNECTED WIRING. HOOKED UP CRANE AND LIFTED TANK. CLEANED PINS AND PUSHINGS FOR BOX INSTALLED BOX PINS AND SPACERS. HOOKE DUP HOIST HOSES. HOOKED UP GREASE LINES. FIXED BOX RAISE/LOWER LINKAGE. RAN MACHINE. ZIP TIED LOOSE HOSES OUT OF THE WAY. STARTED MAACHINE IN/OUT SHEETS.

JUNE 23,10: SWAP WATER BOX FOR HAUL BOX:UNHOOKED HYDRAULIC LINES FROM PUMP.UNHOOKED GRASE LINES. UNBOLTED PIN RETAINERS. HOOKED UP CRANE.PULLED FRONT PINS AND BACK PINS. CRANED WATER BOX OFF PUT ON BLOCKING. HOOKED CRANE TO DAMP BOX LIFTED INTO PLACE. PUT PINE IN REAR PLACED FRON TOF BOX ON BLOCKING. RECONNECTED HOIST CYLINDER PRESSURE LINES. RECONNECTED GREASE LINES AND ELECTRICAL OUT BACK PINS AND ELECTRICAL HARNESS. REPAIRED HOIST CYLINDERS AND PUT VREHAINE'S ON BACK + FORE PINS. HOIST CYLINDER PIN GREASE LINE REATTACHED. REINSTALLED ROCK INJECTORS. ZIP TIED HYDRAULIC LINES AND ELCTRICAL UP AND OUT OF THE WAY. STARTED PRE RENTAL INSPECTION SHEET.

1-Jun-2010 WOC55438 - FIRE SUPP 35,235MACHINE AT LEDCOR NEED 1200HR PM F/SLEVITT OUT TO DO.

8-May-2010 WOC53204 - INSTALL WATER TANK 35,236




Remove tray - install water tank and hook up hydraulics and electrical connections and test operationInstall fire extinguisher

8-May-2010 WOC53223 - REPLACE TORQUE SEAL 35,220Seal leak - change seal, replace torque seal

3-May-2010 WOC52588 - INSHEET & SAMPLES 35,220INSHEET AND OIL SAMPLESDONE BY DUTCH

3-May-2010 WOC52626 - RR WHEEL SEAL 35,220REPLACE A LEAKING RIGHT REAR WHEEL SEAL REPLACE RADIOCHARGE STRUTSinstall fire extinguishers

12-Mar-2010 WOC46463 - START MACHINE 35,214START RDC023 AND RDC002 AT NORTH GATE FOR PICK UP

27-Feb-2010 WOC45186 - REPLACE STEERING MOTOR 35,219Replace. Fill out component sheet

FEB 27, 10 - EMERGENCY STEERING NOT WORKING - GARNETTROUBLESHOOT EMERGENCY STANDBY STSTEM, NOT FUNCTIONING. ORDER NEW MOTOR. TRAVEL TO PICK UP MOTOR, INSTALL MOTOR, TEST SYSTEM OK. AUTO LUBE NOT WORKING, START INTO TROUBLESHOOTING OF FAULT, ON GOING.

FEB 28, 10 - TROUBLESHOOT ELECTRICAL FAULT 546-5 ETHER HOLD RELAY. TESTED RELAY OK, INSPECTED WIRING AND HARNESS'S. QUITE A FEW EXTRA WIRES AND HARNESS'S ADDED FIR 2-WAY RADIOS AND // VARIOUS. TRACED OUT AUTO GREASE HARNESS AND FOUND IT CONNECTED INTO ETHER START AID CIRCUIT. ONLY A 10 AMP CIRCUIT AND AUTO GREASE MOTOR ARATED FOR 20 AMPS @ 24 VOLT. SO IT WAS OBVIOUS THAT THE FUSE HAD BEEN BURNT. REPLACED FUSE WITH 20 AMP AGC. AUTO GREASE WORKS OK AND SERVICE FAULT CODE GONE FROM DISPLAY. WIRING IN REAR OF CAB VERY "HELTER SKELTER" WITH "ADDED ON" CIRCUITS ETC. 2 WAY RADIOS, AUTO LUBE, FOG LAMPS,WATER TRUCK HARNESS?/ AND OTHERS NOT EASILY IDENTIFIED.

26-Feb-2010 WOC45080 - REPLACE RHS BOX CYLINDER 35,219REPLACE RHS BOX CYLINDERDELIVER NITROGEN BOTTLE TO SITE, SECURE BOTTLeRemove nitrogen bottle, blocking,plates, and garbage from site.

COMPLETED BY DUTCH AND GARNET

17-Feb-2010 WOC43825 - REPLACE TIRES 35,219REPLACE: RIGHT REAR INSIDE, RIGHT REAR OUTSIDE, LEFT REAR INSIDE TIRES

COMPLETED BY KAL-TIRE

15-Feb-2010 WOC43715 - REPAIR DAMAGED LIGHTS 35,219REPAIR DAMAGED LIGHTS ON TOP REAR OF BOX

BACK CHARGE TO COW HARBOUR

FEB 26, 10 - GAARNETOLD LIGHT BRACKET HANGING FROM HARNESS PATCHED UP WIRING AND INSTALLED ONE LAMP ASSEMBLY. NEED GROMMET FOR OTHER LAMP. REINSTALLED GUARDS AND ANCILLARY PANESL PREVIOUSLY REMOVED. MOVED TRUCK FRO MINE OF OIL USED PARTS. TRUCK STILL HAS ISSUES BUT ABLE TO BE MOVED.

13-Feb-2010 WOC43595 - CHANGE TORQUE OUTPUT SEAL 35,219Change pump drive input sealrepair lights - work and dashReplace missing stabilizer link bolt and washerChange

FEB 26, 10 - GARNETREPLACED PUMP DRIVE INPUT SHAFT SEAL.

10-Feb-2010 WOC43185 - 1000 HR SERVICE (WARRIO) 35,214




Done by Warrior services

FEB 09, 10 - START UP - CURTISCHECK OVER, GET FUELED, START UP. CHECK SHIFTNG PROBLEM. MOVE TO NORTH GATE.

FEB 11, 10 - 1000 HR PM - WARRIOR SERVICES1000 HR PM SERVICEDRAIN TRANSMISSION RESEVOIRDRAIN USED OILREMOVE GARBAGE& OIL PADSRELOAD OILS AND FILTERS

26-Jan-2010 WOC41333 - REPLACE AIR PRESSURE RELIEF 35,194REPLACE AIR PRESSURE RELIEFREPLACED VALVE STILL NO AIR BUILD UP LOOKED AROUND FOUND SAFTEY VALVE MISSING ON AIR DRYER PLUGED HOLE WITH PIPE PLUG

11-Jan-2010 WOC39509 - TROUBLESHOOT CODES AND REPAIR 34,850TROUBLESHOOT CODES AND REPAIR

WORKED ON BY:KEVIN L, DARREN J. , AND SCOTT M

24-Dec-2009 WOC39513 - FIRE SUPPRESSION 34,812FIRE SUPPRESSION - COMPLETED BY LEVITTEI DID AN 1200 HR PM ON UNIT RDC023. I CHECKED ALL THE HOSES, FITTINGS, NOZZLES AND WIRE O.K. I CHECKED AND CLEANED THE IRS. I DID A SHOT TEST AND ENGINE SHUTDOWN TEST. SYSTEM OK.

20-Dec-2009 WOC38294 - NOT GOING INTO 1ST OR REVERSE 34,518MACHINE NOT GOING INTO FIRST OR REVERSE

DEC 24, 09 - OPERATOR COMPLAING ABOUT GEAR DOSN'T ENGAGE TO GEAR - RICARTETRAVELLED TO MACHNE TO FIND MACHINE OUT IN THE FIELD. PUT WHEEL CHUCK, TROUBLESHOOT THE PROBLE. PUT THE BOX UP IN THE AIR, PIN IN AND CHECKED SOME ELECTRICAL HARNESS CONNECTORS. ON SOLENOID FOUND OUT CONNECTOR INTERMITTENT CONTACT (ZIP TIGHT) BRING BOX DOWN AND SEND MACHINE TO WORK AGAIN.

11-Dec-2009 WOC36617 - COLD START / OUT INSPECTION 34,520-45 C WARM UP AND START ENGINE

DEC 11, 09 - GHISLAINOUT SHEET INSPECTION, TARP IN RAD, RE & RE AIR GOVERNOR

7-Dec-2009 WOC35836 - INSTALL TIRES (KAL-TIRE) 34,520INSTALL TIRES COMPLETED BY KAL-TIRE

27-Nov-2009 WOC32715 - LIFT AND INSTALL BOX 34,518LIFT AND INSTALL BOXSTART AND REPAIRS

NOV 27, 09 - GARNETPREP FOR BODY INSTALL, CLEAN UP GARBAGE AROUND BOX. MOVE 789C STUFF TO 789C AREA. COLD START TRUCK, MOVED INTO POSITION.

NOV 27, 09 - GRANTBOOSTA ND GET RUNNINGCLEAN UP AREASHIFT RUCK FOR BODY INSTALL AND PREP CRANE PAD

NOV 29, 09 - GARNETINSTALLED BODY AND SHIMMED PIVOT PINS. HOOKED UP HOIST CYLINDERS. HOOKED UP BODY CLEARANCE LGITHS. CONNECTED GREASE LINES. BUILT UP, REPAIRED HOLE FOR R/H ROCK KICKER WORN BADLY.

NOV 30, 09- GARNETCHARGE SUSPENSION CYLCINDERS. ADDED OIL TO R/R CYLINDER. INSTALLED ROCK KICKERS. REPLACED ALTERNATOR BELT. 1/2 GONE AND RATTY. BROKEN BELT AND SPACER MISSING FOR GUARD (REPAIRED). TROUBLESHOOT AND START REPAIRS ON LIGHT WIRING. COLD START.

DEC 01, 09 - GARNETREPLACED LEFT REAR TAIL LIGHT ASSEMBLIES. REPAIRED ELECTRICAL WIRE HARNESS.

24-Nov-2009 WOC29999 - WASH / CLEAN / AIRLEAKS 34,947WASH / CLEAN COMPLETED BY SHAWN

23-Nov-2009 WOC29482 - REMOVED SIDE EXTENSIONS 34,947




REMOVED SIDE EXTENSIONS COMPLETED BY MIKE@ MPI WELDING

18-Nov-2009 WOC28677 - RDC024 34,947REMOVE WATER TANK, AND INSTALL DUMP

WRONG UNIT #


PICTURE TO COME...Negotiated sales for heavy equipment & industrial assets 1997 Caterpillar 777D...

Documents

Transcript of PICTURE TO COME...Negotiated sales for heavy equipment & industrial assets 1997 Caterpillar 777D...