Period: 2006-2010

BOOKS (IN SPANISH AND ENGLISH):

AYUGA, E, GONZÁLEZ C. (2008). Convergenciaeuropea en la UPM: IngenieríasAgroforestales y CienciasAmbientales. (coordinadoras). Ed. FundaciónCondedel Valle de Salazar. Madrid. ISBN-13:978-84-96442-25-2

U. MANDER, C.A. BREBBIA, and J.F. MARTIN-DUQUE, Editors (2008). WIT Transactions on the Built Environment.Geo-Environment and Landscape Evolution III. CHAP. GARCÍA, M.J.; GARCÍA, A. I.; ATKINSON, D.J. Greenspaces planning evolution in Madrid in the 20th century. WIT press Wessex Institute of Technology. London

J F Chen, J Y Ooi and J G Teng editors.(2008). Structures and Granular Solids.From scientific

Principles to Engineering Applications. Chap: F. Ayuga. Some unresolved problems in the design of steel cylindrical silos. Ed. Taylor & Francis. London.

- TRUEBA, I. et al. (2006). El fin delhambre en 2025. Ed. Mundi-Prensa. ISBN 84-8476-283-1

complete list

Period: 2006-2010

ARTICLES (IN ENGLISH):

28Fuentes J. M. (2010). Methodological bases for documenting and reusing vernacular farm architecture. Journal of Cultural Heritage, 11 (2): 119-129

27Fuentes J. M., Gallego E., García A.I.; Ayuga F. (2010). New uses for old traditional farm buildings: The case of the underground wine cellars in Spain. Land Use Policy, 27 (3): 738-748

26Gallego E., Rombach G. A., Neumann F., Ayuga F. (2010). Simulations of Granular Flow in Silos with Different Finite Element Programs: ANSYS vs. SILO. Transactions of the ASABE, 53(3): 819-829

25 Ramírez A., Nielsen J., Ayuga F. (2010). On the use of plate-type normal pressure cells in silos: Part 2: Validation for pressure measurements. Computers and Electronics in Agriculture 71 (1): 64-70

24Ramírez A., Nielsen J., Ayuga F. (2010). On the use of plate-type normal pressure cells in silos: Part 1: Calibration and evaluation. Computers and Electronics in Agriculture 71 (1): 71-76

23Ramírez, A; García-Torrent J., Tascón, A. (2010). Experimental determination of self-heating and self-ignition risks associated with the dusts of agricultural materials commonly stored in silos. Journal of Hazardous Materials, 175 (1-3): 920-927

22Ramírez A., Moya M., Ayuga F. (2009). Determination of the mechanical properties of powdered agricultural products and sugar. Particle & Particle Systems Characterization, 26 (4): 220-230

21Tascón, A., Aguado P. J., Ramírez, A.. (2009). Dust explosion venting in silos: A comparison of standards NFPA 68 and EN 14491. Journal of Loss Prevention in the Process Industries 22 (2): 204–209

20 González-Montellano C., Ramírez A., Gallego E., Ayuga F. (2009).On the steel cost of circular flat-bottomed silos designed using the Eurocodes. Structural Engineering and Mechanics, 33 (5): 561-572

19 Ramírez, A., Ansourian, P., Ayuga F., Rasmussen K. (2009). Analysis of Measurements Obtained by Plate-type Pressure Cells Having a Recess - DEM Simulation. Bulk Solids & Powder – Science & Technology 4 (1): 34-38

18 Cañas, I., Ayuga, E., Ayuga, F.(2009). A contribution to the assessment of scenic quality of landscapes based on preferences expressed by the public. Land Use Policy, 26 (4): 1173-1181

17 Tascón, A., Aguado P. J., Ramírez, A . (2009). Dust explosion venting in silos: A comparison of standards NFPA 68 and EN 14491. Journal of Loss Prevention in the Process Industries 22 (2): 204–209

16 Ramírez, A .García-Torrent J., Aguado P. J.. (2009). Determination of parameters used to prevent ignition of stored materials and to protect against explosions in food industries, Journal of Hazardous Materials 168 (1): 115-120

15 Ayuga, E.; Grande, M. A, González-García, C.; Martín-Fernández A. J.; García A. I. (2008). The Kernel Estimation in Biosystems Engineering.Journal of Systemics, Cybernetics and Informatics. 6(2):23-27

14 Sánchez de Medina, A.; Ayuga, E.; Grande, M.A. &GarcíaAbril, A. (2008).Forestry alternatives to Navarran yield tables for beech (FagusSylvatica L.). AllgemeineForst- und Jagdzeitung. 179 (12): 225-231

13 Gallego E.; Moya M.; Piniés M.; Ayuga F. (2008).Valuation of low volume roads in Spain. Part 2: Methodology validation. Biosystems Engineering 101 (1): 135-142

12 Gallego E.; Moya M.; García A. I.; Ayuga F. (2008).Valuation of low volume roads in Spain. Part 1: Methodology development. Biosystems Engineering 101 (1): 123-134

11 Contato-Carol, M. L.; Ayuga-Téllez, E.; Grande-Ortiz, M. A. (2008).A comparative analysis of methods for the valuation of urban trees in Santiago del Estero, Argentina. Spanish Journal of Agricultural Research 6(3): 341-352.

10 Vidal P.; Gallego E.; Guaita M.; Ayuga F. (2008).Finite element analysis under different boundary conditions of the filling of cylindrical steel silos having an eccentric hopper.Journal of Constructional Steel Research. 64 (4): 480-492

9 García, A. I.; Ayuga F. (2007). Reuse of abandoned buildings and the rural landscape: The situation in Spain. Transactions of the ASABE 50 (4): 1383-1394.

8 Juan, A.; Moran J. M.; Guerra, M. I.; Couto, A.; Ayuga, F.; Aguado P. J. (2006). Establishing stress state of cylindrical metal silos using finite element method: Comparison with ENV 1993. Thin-Walled Structures 44 (11): 1192–1200.

7 Vidal P.; Gallego E.; Guaita M.; Ayuga F. (2006).Simulation of the Filling Pressures of Cylindrical Steel Silos with Concentric and Eccentric Hoppers Using 3-Dimensional Finite Element Models.Transactions of the ASABE. 49 (6): 1881-1895.

6 Fuentes J. M.; Cañas, I. (2006). Subterranean wine cellars of Central-Spain (Ribera de Duero): An underground built heritage to preserve. Tunnelling and Underground Space Technology. 21 (5): 475-484

5 Ayuga E.; Martín-Fernández A. J.; González-García, C.; Martínez-Falero, E. (2006).Estimation of non-parametric regression for dasometric measures. Journal of Applied Statistics 33 (8): 819-836

4 Vidal P.; Couto A.; Ayuga F.; Guaita M. (2006). Influence of hopper eccentricity on discharge of cylindrical mass flow silos with rigid walls. Journal of Engineering Mechanics.ASCE. 132 (9): 1026-1033 .

3 Moya, M.; Guaita, M.; Aguado, P.; Ayuga F. (2006). Mechanical Properties of Granular Agricultural Materials, Part 2. Transactions of the ASABE. 49 (2): 479-489.

2 García, L.; Hernández, J.; Ayuga, F. (2006). Analysis of the materials and exterior texture of agro-industrial buildings: a photo-analytical approach to landscape integration. Landscape and Urban Planning. 74 (2): 110-124.

1 Molenda M., Stasiak M., Moya M., Ramirez A., Horabik J., Ayuga F. (2006). Testing mechanical properties of food powders in two laboratories - degree of consistency of results.International Agrophysics. 20 (1): 37-45.

complete list

Period: 2006-2010

CONFERENCES (IN ENGLISH):

VI Workshop of the Thematic Network “Education and Research in Biosystems or Agricultural and Biological Engineering in Europe; (ERABEE-TN)”. Clermont-Ferrand (France). 9-10 September 2010. TN-ERABEE.

AYUGA F., AGUADO, P. (2010). Enhancing the attractiveness of Spanish study programs in Biosystems Engineering.

AgEng 2010.International Conference on Agricultural Engineering. Clermont-Ferrand (France). 6-8 September 2010. EurAgEng.

VICENTE, J.; AYUGA, E.; OTERO, D.; CHÁVEZ, J. L.; GARCÍA, A. I. (2010). Validating a stream flow prediction model for ungauged watersheds in Spain

AYUGA E., GONZALEZ C., GRANDE M. A., FUENTES J. M., RAMIREZ A., AYUGA F. (2010). Postgraduate studies in Biosystems Engineering to acquire a doctor degree in Spain. Pp. 295

FUENTES J. M., GARCIA A. I., AYUGA F.(2010). Methodological approach to the study and reuse of old traditional agricultural buildings. Pp. 333

GONZALEZ-MONTELLANO C., RAMIREZ A., GALLEGO E., FUENTES J. M., AYUGA F. (2010).Discrete element's capability of predicting material behaviour in a 3-D scale silo with a hopper at its base. Pp. 339

ASABE Annual International Meeting. Pittsburgh, Pennsylvania (USA), 20 -23 June, 2010. ASABE. ISBN: Curran Associates, Inc.

GALLEGO E., AYUGA E., GONZÁLEZ-MONTELLANO C., GARCÍA A. I., AYUGA F. Repair Costs of Low Volume Roads in Spain

GONZÁLEZ-MONTELLANO C., RAMÍREZ A., GALLEGO E., FUENTES J. M., AYUGA F. (2010). Discrete Element modeling of a 3D scale Silo with Hopper

V Workshop of the Thematic Network “Education and Research in Biosystems or Agricultural and Biological Engineering in Europe; (ERABEE-TN)”. Prague 29-30 April 2010. TN-ERABEE. ISBN: 987-960-6806-13-1

AYUGA F., AGUADO, P. (2010). Quality assurance and assessment frameworks of Biosystems engineering studies in Spain. Pp. 154-163

APLU-ICA Conference 2010.Doctoral and postdoctoral professional development in Agricultural and Life Sciences. Gent (Belgium). 7-9 April 2010. APLU e ICA.

AYUGA F., BRIASSOULIS D., AGUADO P., FARKAS I., GRIEPENTROG H., LORENCOWICZ E. (2010). Third Cycle University studies in Europe in the field of Agricultural Engineering and in the emerging discipline of Biosystems Engineering.

IV Workshop of the Thematic Network “Education and Research in Biosystems or Agricultural and Biological Engineering in Europe; (ERABEE-TN)”. Malta, 16-17 November 2009. TN-ERABEE. ISBN:

AYUGA F., AGUADO, P. (2009). Research activities in the first two cycles of Spanish Biosystems Engineering University studies.Pp.

International Conference of Education, Research and Innovation (ICERI 2009) Madrid (Spain) 16-18 November, 2009. IATED (International Association of Technology, Education and Development).

AYUGA F., BRIASSOULIS D., AGUADO P., FARKAS I., GRIEPENTROG H., LORENCOWICZ E. (2009). Third cycle studies on the new emerging discipline “Biosystems Engineering” in Europe, an ERABEE Thematic Network survey.

Symposium of the IASS 2009.Evolution and trends in design, analysis and construction of shell and spatial structures. Valencia, 28 September- 2 October 2009. IASS (International Association for Shell and Spatial Structures). ISBN: 978 84 8363 459 2, ISBN CD: 978 84 8363 461 5

AYUGA F., GONZALEZ C., GALLEGO E., FUENTES J.M., RAMIREZ A. (2009) Influence of patch-load on metal silos with corrugated walls. Pp. 66-67

Biennial Conference of the Australian Society for Engineering in Agriculture (SEAg). Brisbane, 13-16 September 2009.

RAMÍREZ, A.; AYUGA, E.; GALLEGO, E. FUENTES, J.M. y GARCÍA, A.I. (2009).A Methodology to Assess Landscapes from Rural Roads. 8pp.

6th International Conference for Conveying and Handling of Particulate Solids (CHoPS) and 10th International Conference on Bulk Materials Storage, Handling and Transportation (ICBMH). Brisbane, Australia. 3rd - 7th August 2009. University of Wollongong, Australia

GALLEGO E., GONZALEZ C., RAMIREZ A., AYUGA F. (2009). The Effect of Patch-Load on Stress Components of Corrugated Silo Walls

RAMIREZ A., AYUGA F., OOI J. (2009). Discrete Element Modelling of Grain Flow in a Planar Silo: Influence of Simulation Parameters

ASABE Annual International Meeting. Reno (Nevada, USA), 21- 24 June 2009. ASABE

MONTERO M. J., CANO S., GALLEGO E., GARCÍA A. I., AYUGA F. (2009). The use of waste materials in the repair and construction of low volume roads.

FUENTES J. M., GALLEGO E., RAMIREZ A., GONZALEZ C., MONTERO M. J., AYUGA F. (2009). Computational methods for the design of formworks used in rural works

III Workshop of the Thematic Network “Education and Research in Biosystems or Agricultural and Biological Engineering in Europe; (ERABEE-TN)”.Upssala, (Sweden) 4 -5 May 2009. TN-ERABEE. ISBN:

AYUGA F., AGUADO, P. (2009). Present situation and future of the 3rd cycle studies in Agricultural Engineering and in Biosystems Engineering in Spain

INTED2009. International Technology, Education and Development Conference. Valencia (Spain) 9-11 March 2009. IATED.

GARCÍA A. I., AYUGA F., FUENTES J. M., GALLEGO E., RAMÍREZ A. (2009). The evolution of the technical project as the final work in the Spanish Agricultural Engineering studies

Structures and Granular Solids.From scientific Principles to Engineering Applications. Edinburgh. (UK). 1-2 July 2008. Royal Society of Edinburgh.

GONZÁLEZ C.; RAMÍREZ A.; AYUGA F. (2008). Influence of buckling consideration in steel silo costs.

II Workshop of the Thematic Network “Education and Research in Biosystems or Agricultural and Biological Engineering in Europe; (ERABEE-TN)”.Dublín, 13-14 October 2008. TN-ERABEE. ISBN: 978-960-6806-07-0

AYUGA F., AGUADO, P. (2008). Bio-fuels, bio-materials and quality of products in the Biosystems Engineering and Agricultural Engineering Studies in Spain. Pp. 143-148

36th Solid Mechanics Conference. Gdansk (Poland). 9-12 September 2008. Polish Academy of Sciences. ISBN: 978-83-89687-35-7

GONZÁLEZ C.; GALLEGO E.; MORÁN, J.; AYUGA F. (2008).The effect of patch load on corrugated silo walls. Pp. 338-339

23rd Session PECSR (Permanent European Conference for the Study of the Rural Landscape) 2008: Landscapes, Identities and Development. Lisbon / Óbidos, Portugal, 1-5 September 2008. ISBN: 978-989-96113-0-6

GARCÍA, M.J.; GARCÍA, A. I.; CALDERÓN, C. (2008).Green planning evolution and current framework in Madrid on the 20th century. Pp. 61

Structures and Granular Solids.From scientific Principles to Engineering Applications. Edinburgh. (UK). 1-2 July 2008. Royal Society of Edinburgh.

GONZÁLEZ C.; RAMÍREZ A.; AYUGA F. (2008). Influence of buckling consideration in steel silo costs

AgEng 2008.International Conference on Agricultural Engineering. Crete (Greece). 23-25 June 2008. EurAgEng.

PANAGAKIS, P.; BRIASSOULIS, D.; NIKOPOULOS, E.; DOUZALS, J. P.; SCARASCIA-MUGNOZZA, G.; FEBO, P.; COMPARETTI, A.; FEHRMANN, J.; AYUGA, F.; MOSTAGHIMI, S.; WOLFE, M. L.; RISKOWSKI, G.; TING, K. C.; KANWAR, R. (2008). Policy Oriented Measures in Support of the Evolving Biosystems Engineering Studies in USA – EU

GALLEGO, E.; VIDAL, P.; AYUGA F. (2008).Analysis of pressures in hoppers with finite element models.

RAMÍREZ, A.; NIELSEN J., AYUGA F. (2008). Influence of the hopper eccentricity of silos in pressure distributions.

GALLEGO, E.; FUENTES, J. M.; RAMÍREZ A.; AYUGA F. (2008).Design of formworks with two-dimensional and three-dimensional finite element models.

MONTERO M. J., RAMÍREZ A., GARCÍA A. I., AYUGA.F. (2008).The use of waste materials in rural road construction and maintenance.

GONZÁLEZ C.; FERNÁNDEZ M. S.; RAMÍREZ A.; AYUGA F. (2008). Influence of the stored material and the geometry on metal circular silo design

GONZÁLEZ, C.; FERNANDEZ, M. S. ,RAMÍREZ, A.; AYUGA F. (2008). Influence of the stored material and the geometry on circular steel silo design

AYUGA, E.; MUÑOZ , D., RAMÍREZ, A., GARCÍA, A.I. (2008) Landscape assessment according to the level of studies of the observer.

AYUGA, E.; GONZÁLEZ GARCÍA, C.; GRANDE ORTIZ, M.A. (2008) A Curriculum Proposal for Forestry Engineering Studies at Degree Level According to USAEE Guidelines.

AYUGA, E.; GONZÁLEZ GARCÍA, C.; GRANDE ORTIZ, M.A. & MARTÍN FERNÁNDEZ, A.J. (2008) Spatial Statistics For Geographical Information Systems Applied To Ecology.

Third International Conference on Evaluation, Montoring, Simulation, Management and Remediation of the Geological Environment and Landscape.GEO-ENVIRONMENT 2008. New Forest (UK), 16-18 June 2008.

GARCÍA, M. J.; GARCÍA, A. I.; ATKINSON, D.J. (2008).Greenspaces planning evolution in Madrid in the 20th century.

I Workshop of the Thematic Network “Education and Research in Biosystems or Agricultural and Biological Engineering in Europe; (ERABEE-TN)”. Madrid (Spain), 2- 4 April 2008. TN-ERABEE.

AYUGA, F; AGUADO, P. (2008).The future of Biosystems Engineering in Spain.

INTED2008. International Technology, Education and Development Conference. Valencia (Spain) 3-4 March 2008. IATED.

BRIASSOULIS, D.; PANAGAKIS, P.; NIKOPOULOS, E.; AYUGA, F. (2008). The emerging evolution from Agricultural Engineering to Biosystems Engineering studies in Europe

9th International Conference on Bulk Materials Storage, Handling and Transportation ICBMH 2007. Newcastle (Australia) 9-11 October 2007. The University of Newcastle. ISBN: 0-85825-846-3

RAMÍREZ, A.; EINAV I.; ANSOURIAN P.; AYUGA F.; RASMUSSEN K. (2007). Influence of local imperfections in silo pressure measurements – DEM analysis

The Biennal Conference of the Australian Society for Engineering in Agriculture.SEAg 07. Adelaide (Australia), 23-26 September 2007

RAMÍREZ, A.; EINAV I.; ANSOURIAN P.; AYUGA F.; RASMUSSEN K. (2007).Granular effects arising from mounted Pressure Cells in silo walls – DEM analyses. Pp. 298-304

The 3rd International Symposium on Management, Engineering and Informatics: MEI 2007. Orlando (USA) 8 -11 July 2007. International Institute for Informatics and Systemics

AYUGA, E.; GRANDE, M. A.; GONZÁLEZ, C.; MARTÍN FERNÁNDEZ, A. J.; GARCÍA GARCÍA, A. I. The Kernel Estimation in Biosystems Engineering.

INTED2007 International Technology, Education and Development Conference. Valencia (Spain) 7-9 March 2007. International Association for Technology, Education and Development. ISBN: 84-611-4516-X

AYUGA, F.; BRIASSOULIS, D. (2007). The thematic network USAEE (university studies of agricultural engineering in Europe), its objectives and consequences

VIII Workshop of the Thematic Network “University Studies of Agricultural Engineering in Europe (USAEE)”. Bonn (Germany), 6-9 September 2006. TN-USAEE.

AYUGA, F. (2006).Tools for quality assurance and assessment of agricultural engineering programmes, tuning subject-area lines and disappearing rare knowledge in Spain.

World Congress 2006 - Agricultural Engineering for a better World. Bonn (Germany), 3 -7 September 2006. CIGR / EurAgEng / VDI-MEG / FAO.

RAMÍREZ, A.; GALLEGO, E.; AYUGA, E.; GARCÍA, A. I. (2006). Significant attributes of the landscape around rural roads.

Torrent, J., Querol, E., Ramírez, A., Aguado, P. (2006). Experimental Research on Explosibility of Agricultural Materials in Silos

5th International Conference for Conveying and Handling of Particulate Solids. Sorrento (Italy), 27-31 August 2006. International Scientific Council (ISC).

RAMIREZ, A.; NIELSEN, J.; AYUGA, F.; MUNCH-ANDERSEN J. (2006).Pressure measurements in full-scale steel silos with eccentric hoppers.

ASABE Annual International Meeting. Portland (USA), 9-12 July 2006. ASABE

AYUGA, F.; AGUADO, P. J.; GALLEGO, E.; RAMÍREZ, A. (2006).Experimental Tests to Validate Numerical Models in Silos Design.

5th World Congress on Particle Technology 2006.Orlando (USA) 23-27 April 2006. American Institute of Chemical Engineers. ISBN 0-8169-1005-7

RAMÍREZ, A.; NIELSEN, J.; AYUGA, F.; MUNCH-ANDERSEN, J. (2006). On the Use of Plate-Type Normal Pressure Cells for Silos

RAMÍREZ, A.; NIELSEN, J.; AYUGA, F.; MUNCH-ANDERSEN, J. (2006) Pressure Measurements in Full-Scale Steel Silos.

International Seminar on Maintenance of rural roads, stakes and perspectives. Rabat (Morocco) 20-21 April 2006. PIARC & CIGR.

GALLEGO, E.; AYUGA, F.; DAL-RE, R.; MOYA, M. (2006). The evolution of the Rural Road network in Spain during the 20th Century

VII Workshop of the Thematic Network “University Studies of Agricultural Engineering in Europe (USAEE)”. Vilnius (Lithuania) 1-2 April 2006. TN-USAEE. ISBN 960-89313-0-4

AYUGA, F. (2006).Restructuring agricultural engineering studies and employability in Spain. 118-125

VI Workshop of the Thematic Network “University Studies of Agricultural Engineering in Europe (USAEE)”.Budapest (Hungary) 17 -20 September 2005.TN-USAEE.

AYUGA, F. (2005). Agricultural Engineering Studies meeting the FEANI and EurAgEng criteria in Spain

Powders & Grains 2005. Stuttgart, (Germany). 18- 22 July 2005. Stuttgart University. ISBN: 04-153834-8-X

ROMBACH, G. A.; AYUGA F.; NEUMANN F.; GALLEGO E. (2005). Modelling of granular flow in silos based on finite element method ANSYS vs. SILO

Vth International Symposium of the CIGR “Concrete for a Sustainable Agriculture”. San Lorenzo del Escorial (Spain) 5-8 June 2005.

RODRÍGUEZ, S.; Fuentes , J.M. ; Cañas I. (2005). Application of ultrasonic tests to assess precast concrete façades in agricultural buildings

International Colloquium, Quality Agriculture: Historical Heritage And Environmental Resources For The Integrated Development of Territories. Italy, 4-9 July 2005. IGU – International Geographical Union, Commission on Sustainability of Rural Systems.

AYUGA F., GARCIA A. I., RAMÍREZ A., GARCÍA J. M. (2005). Rural landscape assessment and changes after human intervention.

V Workshop of the Thematic Network “University Studies of Agricultural Engineering in Europe (USAEE)”.Dresden (Germany) 8-10 April 2005. TN-USAEE. ISBN: 960-92379-4-0

AYUGA, F., RUIZ-ALTISENT, M. (2005). Quality assurance for university studies in Spain. Pp. 188-192

complete list