Peak Performance. · provides extended life and more cutting power than aluminum oxide – across...
Transcript of Peak Performance. · provides extended life and more cutting power than aluminum oxide – across...
Bring it on!A complete lineup of hardworking alumina zirconia flap discs – built to tackle all your toughest grinding & finishing jobs!
3M™ AZ Flap Discs NEW 3M™ Flap Discs 566A
PeakPerformance.
Introducing
Great Value.
11120452_FlapDisc_Brochure.indd 2 12/19/11 11:38 AM
– long after other discs have called it quits!
The power of flap disc technologyFlap discs are three-dimensional grinding discs consisting of overlapping layers of abrasive-coated, fiber-reinforced flaps attached to a central hub. These flaps continually wear away with use to expose fresh mineral for a fast, consistent cut.
The one-step alternative to bonded wheels and fibre discs. Flap discs are flexible, so they easily follow curves and contours. They deliver less gouging, and provide great operator comfort. Best of all, they allow one-step grinding and blending – making them a time and cost-saving solution in many typical applications.
Under normal conditions, flap discs will generate a finish that is one grade finer than the finish of a fibre disc of the same grade. And, because their unique construction allows more abrasive material to be loaded on, they keep on cutting – long after other discs have called it quits!
keep on going
3M™ AZ Flap Discs
Today’s highly competitive metalworking business is all about reducing costs through achieving greater productivity. Now, 3M brings you a full line of high-performance alumina zirconia flap discs – designed to reduce your labor cost per part by combining grinding and blending in one smooth process step!
3M™ AZ Flap Discs 546D, 577F and new 566A feature an alumina zirconia abrasive for superior cutting power and versatile performance on all metal types.
Flap discs are ideal for a wide range of applications, including:
• Grinding• Blending• Finishing• Splatter removal
• Surface prep• Beveling• Deburring• Edge chamfering
3M™ AZ Flap Discs pack more punch – for top performance.
Alumina zirconia
provides extended life
and more cutting power
than aluminum oxide –
across all metal types.
Get peak performance
Average flap discs provide average performance, but you choose 3M because average simply isn’t good enough. 3M flap discs are engineered to provide the durability and cut rate you need, for your specific application.
Typical Applications BackingDiameter × Ctr. Hole (inches)
4 × 3⁄ 8 – 24 4 × 5⁄8 4 1⁄2 × 5⁄8 – 11 4 1⁄2 × 7⁄ 8 7 × 5⁄8 – 11 7 × 7⁄ 8T27 T29 T27 T29 T27 T29 T27 T29 T27 T29 T27 T29
546D Low pressure grinding: small welds, splatter, surface prep, finishing
X wt. cotton
• • • • • • • •
566A Versatile disc, performs well on most applications
Y wt. poly-cotton
• • • • • • • • • •
577F High pressure grinding: deburring, edge work and beveling
Y wt. polyester
• • • • • • • • • •
3M™ AZ Flap Discs
Engineered to
for your specific application
11120452_FlapDisc_Brochure.indd 3 12/19/11 11:39 AM
3M™ AZ Flap Discs
Select 3M™ Flap Discs are available in the two following configurations:
TYPE 29 is angled for aggressive stock removal and fast cutting on both flat and curved surfaces.
TYPE 27 is designed for flat surfaces or outside edges. It is ideal for smooth finishes.
Ordering
546D
LOW HIGH
566A 577F
Pressure
3M™ Flap Discs 546D
UPC 051141-
Grade
Dia. × Ctr. Hole (inches)
Max.
RPM
Quantity/Case
Type
27
30594-3 40
4 1⁄2 × 5⁄8 –11*
13,300 10
30595-0 6030596-7 8030597-4† 12030599-8 40
4 1⁄2 × 7⁄830600-1 6030601-8 8030602-5† 12030608-7 40
7 × 5⁄8 –11*
8,600 5
30609-4 6030610-0 80
+ 28919-4† 12030604-9 40
7 × 7⁄830605-6 6030606-3 80
+ 28917-0† 120
Type
29
+ 28870-8 40
4 1⁄2 × 5⁄8 –11*
13,3000 10
+ 28871-5 60+ 28872-2 80+ 28873-9† 120+ 28876-0 40
4 1⁄2 × 7⁄8+ 28877-7 60+ 28878-4 80+ 28879-1† 120+ 28922-4 40
7 × 5⁄8 –11*
8,600 5
+ 28923-1 60+ 28924-8 80+ 28925-5† 120+ 28928-6 40
7 × 7⁄8+ 28929-3 60+ 28930-9 80+ 28931-6† 120
* Quick Change Hub Attachment† Made-to-Order+ UPC Prefix= 051115-
For light duty grinding and
finishing, choose 546D,
made with a wearable
cotton backing that
constantly exposes fresh
mineral for fast cut.
NEW! 3M™ Flap Discs 566A
UPC 051141-
Grade
Dia. × Ctr. Hole(inches)
Max.
RPM
Quantity/Case
Type
27
553627 404 1⁄2 × 5⁄8 –11*
13,300 10
553634 60553641 80553665 40
4 1⁄2 × 7⁄8553672 60553689 80553702 40
7 × 5⁄8 –11*
8,600 5
553719 60553726 80553740 40
7 × 7⁄8553757 60553764 80
Type
29
553948 404 × 3 ⁄8 – 24*
13,300 10
553955 60553962 80553986 40
4 × 5 ⁄8553993 60554006 80554020 40
4 1⁄2 × 5⁄8 –11*554037 60554044 80554068 40
4 1⁄2 × 7⁄8554075 60554082 80554105 40
7 × 5⁄8 –11*
8,600 5
554112 60554129 80554143 40
7 × 7⁄8554150 60554167 80
3M™ Flap Discs 577F
UPC 051141-
Grade
Dia. × Ctr. Hole (inches)
Max.
RPM
Quantity/Case
Type
27
30951-4 36
4 1⁄2 × 5⁄8 –11*
13,300 10
30952-1 4030953-8 6030954-5 8030955-2 36
4 1⁄2 × 7⁄830956-9 4030957-6 6030958-3 8030963-7 36
7 × 5⁄8 –11*
8,600 5
30964-4 4030965-1 6030966-8 8030959-0 36
7 × 7⁄830960-6 4030961-3 6030962-0 80
Type
29
27530-7 404 × 3⁄8 – 24*
13,300 10
27531-4 6027532-1 8028544-3† 40
4 × 5⁄828545-0† 6028565-8† 8030983-5 36
4 1⁄2 × 5⁄8 – 11*30984-2 4030985-9 6030986-6 8030987-3 36
4 1⁄2 × 7⁄830988-0 4030989-7 6030990-3 8030991-0 36
7 × 5⁄8 – 11*
8,600 5
30992-7 4030993-4 6030994-1 8030995-8 36
7 × 7⁄830996-5 4030997-2 6030998-9 80
* Quick Change Hub Attachment† Made-to-Order
When you want it all,
choose 566A, with
a flexible poly-cotton
backing and a great
balance of cut and life.
For heavy grinding,
choose 577F with
its durable polyester
backing made for
long life.Information
Choose the right disc for the job.
11120452_FlapDisc_Brochure.indd 4 12/19/11 11:39 AM
Abrasive Systems Division3M Center, Building 21-1W-10St. Paul, MN 55144-10001-866-279-1235www.3M.com/abrasives
Product Use: All statements, technical information and recommendations contained in this document are based on tests or experience that 3M believes are reliable. However, many factors beyond 3M’s control can affect the use and performance of a 3M product in a particular application, including conditions under which the product is used and the time and environmental conditions in which the product is expected to perform. Since these factors are uniquely within the user’s knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the user’s method of application.
Warranty and Limited Remedy: Unless stated otherwise in 3M’s product literature, packaging inserts or product packaging for individual products, 3M warrants that each 3M product meets the applicable specifications at the time 3M ships the product. Individual products may have additional or different warranties as stated on product literature, package inserts or product packages. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user’s application. If the 3M product is defective within the warranty period, your exclusive remedy and 3M’s and seller’s sole obligation will be, at 3M’s option, to replace the product or refund the purchase price.
Limitation Of Liability: Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental, or consequential regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.
Please recycle. Printed in USA. © 3M 2011. All rights reserved. Issued: 12/11 8329HB Bolger 11120452 61-5002-8313-2
3M is a trademark of 3M Company. Used under license by 3M subsidiaries and affiliates.
3M™ Giant Flap Discs are extra-thick, and packed with more abrasive muscle.
• 25% more abrasive material than standard flap discs
• Delivers longer life and fewer disc changes
3M™ Giant Flap Discs 566A
UPC 051141-
Grade
Dia. × Ctr. Hole(inches)
Max. RPM
Quantity/Case
Type
27
553788 404 1⁄2 × 5⁄8 –11*
13,300 10
553795 60553801 80553825 40
4 1⁄2 × 7⁄8553832 60553849 80553863 40
7 × 5⁄8 –11*
8,600 5
553870 60553887 80553900 40
7 × 7⁄8553917 60553924 80
Type
29
554174 36
4 1⁄2 × 5⁄8 –11*
13,300 10
554181 40554198 60554204 80554211 36
4 1⁄2 × 7⁄8554228 40554235 60554242 80554259 36
7 × 5⁄8 –11*
8,600 5
554266 40554273 60554280 80554297 36
7 × 7⁄8554303 40554310 60554327 80
3M™
Giant Flap Discs3M™ Giant Flap Discs 577F
UPC 051141-
Grade
Dia. × Ctr. Hole
(inches)M
ax. RPM
Quantity/Case
Type
27
30967-5 36
4 1⁄2 × 5⁄8 –11*
13,300 10
30968-2 4030969-9 6030970-5 8030971-2 36
4 1⁄2 × 7⁄830972-9 4030973-6 6030974-3 8030979-8 36
7 × 5⁄8 –11*
8,600 5
30980-4 4030981-1 6030982-8 8030975-0 36
7 × 7⁄830976-7 4030977-4 6030978-1 80
Type
29
30999-6 36
4 1⁄2 × 5⁄8 –11*
13,300 10
31000-8 4031001-5 6031002-2 8031003-9 36
4 1⁄2 × 7⁄831004-6 4031005-3 6031006-0 8031011-4 36
7 × 5⁄8 –11*
8,600 5
31012-1 4031013-8 6031014-5 8031007-7 36
7 × 7⁄831008-4 4031009-1 6031010-7 80
* Quick Change Hub Attachment
3M™ AZ Flap Discs
Take a giant step toward greater productivity!
More Material.
Longer Life.
Giant Flap Disc
Standard Flap Disc
11120452_FlapDisc_Brochure.indd 1 12/19/11 11:38 AM