VISION OF THE DEPARTMENTveltechmultitech.org/wp-content/uploads/2017/10/...Our Students have visited...
Transcript of VISION OF THE DEPARTMENTveltechmultitech.org/wp-content/uploads/2017/10/...Our Students have visited...
VISION OF THE DEPARTMENT
To become a centre of eminence in educating students to become
triumphant mechanical engineers.
MISSION OF THE DEPARTMENT
To endue the students with the fundamentals of mechanical
engineering with a passion for lifelong learning of industry practices.
To propagate lifelong learning.
To impart the right proportion of knowledge blended with attitudes
and ethics in students to enable them take up positions of responsibil-
ity in the society and make significant contributions.
PRINCIPAL MESSAGE
Dr.V.Rajamani M.E., Ph.D Principal
I am very proud and delighted to release the 2nd edition of the ‘IGNITION-2015-16’, the Newsletter of the Department of Mechanical Engineering, which embraces the Achievements of the faculty members and the students. I am very happy to meet you through this page. Vel Tech Multi Tech has stood above the rest in its approach to education and in its pedagogies. The ways we teach and the ways our students learn are unique and creative. Education is not an act of acquiring knowledge but learning a skill to lead life and forming one’s personality. Many constructive efforts have been taken to improve our college results. As campus placements are progressing, efforts to groom the students to serve the society are also in pace. I can boldly say that the Department of Mechanical Engineering has excelled in every initiative that has been undertaken and have stood together in facing the challenges in realizing quality education. I wish to record my hearty congratulations to those who have brought laurels to the institution and I appreciate all of you for working together as a team for the success of this Newsletter.
The Department of Mechanical Engineering is a fledgling department started in
the institution during the year 2006.
This Department was started with an objective to impart high quality education
in Mechanical Engineering with the initial 60 and increased to 120 in the year
2008.
The department has state-of-art labs and qualified Faculty Members
(3 professors, 9 Associate Professors and 14 Assistant Professors) with
passion for both teaching and research.
Students are taught with the help of various teaching aids like smart
classrooms, LCD projector, NPTEL, Educational DVD’s, Video
Conferencing, EDUSAT, Language Communication lab and knowledge
Resource centre.
Our Students have visited various industries like Ashok Leyland, Wabco, TVS,
TAFE, Hyundai Motors Company, Heavy Vehicles Factory, Addison Tools
Limed, etc.,
Our students have undergone Implant Training in various industries such as
India Piston, Ashok Leyland, Greaves Cotton Limited, Chennai Port Trust,
Tata Motors, Ford, Royal Enfield, etc.,
ABOUT THE DEPARTMENT
DEPARTMENT HIGHLIGHTS
AU RANK HOLDER : Our student Mr. MohanaKrishna. G. R was awarded for
securing University Rank in the year 2016
Students of Mechanical have flourished in all events such as Go – Kart, eBaja etc
which was organized across the nation.
RESEARCH LAB : HYUNDAI Sponsored Research Laboratory Facility is set up
to inculcate the knowledge of the students beyond syllabus catering to Industry
Needs
PATENTS : 06 Patents are filed
PUBLICATIONS : 21+ Publications in SCOPUS Indexed and 118 Publications
in other referred journals.
PROFESSIONAL SOCIETY : Active Member of SAE and Active Participation in
Professional Body Events
INNOVATION : Students have established themselves as strong Innovators
and won many awards participating across the nation.
HIGHER EDUCATION : Continuous Motivation from the Department for
students to pursue higher studies.
EMINENT PERSONAITIES DELIVERED LECTURES
Guest Lecture on ‘Design and Development of systems for preparation of high pure Gallium & Indium’ by Dr. V. N. Mani , Scientist - E , Centre for
Materials for Electronics Technology (C-MET) .
Guest lecture on ‘Latest Improvements in Tank Factory’ by Dr. Hafeezur Rahman,
Ph.D Scientist –E, CVRDE, DRDO.
Guest Lecture on ‘Strength of Materials’ by Dr.A.Arockiarajan, Indian Institute of
Technology Chennai.
ACHIEVEMENTS
1. “NATIONAL KART RACING CHAMPIONSHIP SEASON II – 2015”
Students from Mechanical Engineering have participated in this
competition, conducted by RPM Racing Circuit at Bhopal.
2. “BEST PROJECT AWARD”
Our student Mr.Subramaniyan R(2013-2017 Batch),B.E-Mechanical
2nd year student had achieved the BEST PROJECT AWARD in “VISAI
2015”.
3. “ICTACT YOUNG INNOVATOR AWARD”
The students of Mechanical Engineering were shortlisted for the
final round.
4. “ICTACT BRIDGE-2014”
The students of Mechanical Engineering have secured 2nd prize in
Students Innovative Project Contest held at Coimbatore.
5. “ICTACT YOUTH TALK”
The students of Mechanical Engineering has secured 1st prize in
Youth Summit 2014.
6. “SAE BEST PROJECT AWARD ”
Our students of had won the SAE Best project Award for the
project ‘’
7. “YOUTH EXCHANGE PROGRAMME-NEPAL ”
Ms. Kalpana Somunath (2013-2017 Batch) was the only
AMBASSADOR representing INDIA from Tamilnadu and honored by
General Rajendra Chetri, Army Chief in a function held at Nepal.
8. ICMRA-2016
Mr.S.DIVAGAR, Mr.M.VIGNESHWAR student of Mechanical
Department (2013-2017 Batch) received best paper award and
won 1st prize in International Conference on Materials Research and
Applications in CMR Technical campus, Hyderabad.
ACHIEVEMENTS
NATIONAL KART RACING CHAMPIONSHIP 2015 (Season -1) TEAM OPTIMUS
Ms. Kalpana Somunath
(2013-2017 Batch) was the only
AMBASSADOR representing IN-
DIA from Tamilnadu and hon-
ored by General Rajendra Che-
tri, Army Chief in a function
held at Nepal.
BON VOYAGE
Mr. Deepak, is benefited
in the Founder’s Foreign
Studies Scholarship
SCOPUS PUBLICATION
SNO AUTHORS TITLE SOURCE TITLE VOLUME/
ISSUE NO. & P
1 Harish K.A. Selvam M.
Lean wastes: A study of classification from different categories and indus-try perspectives
International Jour-nal of Applied Engi-
neering Research
Vol-10;Issue No:83;Page No:275-281
2
Selvamani S.T., Palanikumar K., Umanath K., Jaya-perumal D.
Analysis of friction welding parame-ters on the mechanical metallurgical and chemical properties of AISI 1035 steel joints
Materials and Design Vol-65;Issue No:;Page No:652-661
3 Dilip Raja N., Velu R., Selvamani S.T.
An experimental study of mechanical properties and effect of welding speed of friction stir welding on allu-minium alloy
I Journal of Science and Technology
Vol-8;Issue No:35;Page No:-
4 Vigneshwar M., Divagar S., Selvamani S.T.
Influence of dual nano particles on high strength aircraft aluminum metal matrix nanocomposites pro-duced by stir casting method
Journal of Chemical and Pharmaceutical Sciences
Vol-2015-October;Issue No:;Page No:18-21
5
Mariselvam V., Selvamani S.T., Divagar S., Vigneshwar M., Jebaraj M.
Tensile strength evaluation on glass and sisal fiber types of composites material
Journal of Chemical and Pharmaceutical Sciences
Vol-2015-April;Issue No:;Page No:3-5
6 Selvamani S.T., Divagar S., Vigneshwar M.
Application of Response Surface Methodology (RSM) in friction weld-ing AISI 1020 grade steel joints
International Jour-nal of Engineering Research in Africa
Vol-16;Issue No:;Page No:38-44
7 Logesh M., Mariselvam V.
Evaluation of tensile properties on natural fiber composites
International Jour-nal of Applied Engi-neering
Vol-10;Issue No:61;Page No:369-372
8 Mariselvam V., Logesh M.
Experimental investigation on flex-ural properties of hybrid natural fi-ber composites
International Jour-nal of Applied Engi-neering Research
Vol-10;Issue No:50;Page No:165-168
9
Palani S., Ohmnath B., Selvam M., Raghunath H., Manikandan K.
Productivity improvement in small medium enterprise by plant relocat-ing through line balancing technique
International Jour-nal of Applied Engi-neering Research
Vol-10;Issue No:83;Page No:42-46
10
Selvam M., Ga-napathy Sriniva-san R., Palani S., Daniel Charles J., Kesavan S.
Investigation of glass fiber rein-forced plastic with aluminium using finite element method for automo-tive applications
International Jour-nal of Applied Engi-neering Research
Vol-10;Issue No:83;Page No:30-35
SNO AUTHORS TITLE SOURCE TITLE VOLUME/
ISSUE NO. & P
11 Johnstephen R., Selvam M., Palani S.
On line monitoring of grinding wheel loading in grinding using vibration analy-sis
International Journal of Applied Engineering Research
Vol-10;Issue No:83;Page No:119-124
12
Palani S., Johnste-phen R., Logesh H., Selvam M., Kaushik M.
Design and development of JIG for mak-ing anchor head in three axis vertical milling machine
International Journal of Applied Engineering Research
Vol-10;Issue No:83;Page No:129-132
13 Mariselvam V., Logesh M.
Analytical analysis on material properties of Kenaf fiber composite
International Journal of Applied Engineering Research
Vol-10;Issue No:50;Page No:617-620
14 Muthukumar S., Mathiyalagan P.
Evaluation of wear behavior of Al-Sicpcomposite under dry sliding wear tests
International Journal of Applied Engineering Research
Vol-10;Issue No:61;Page No:403-411
15
Selvamani S.T., Pal-anikumar K., Shanmugam K., Diva-gar S., Vigneshwar M.
The relationship between tensile and fatigue strength of friction welded steel joints
ASME International Mechanical Engineer-ing Congress and Expo-sition, Proceedings (IMECE)
Vol-14-2015;Issue No:;Page No:-
16 Kannan P., Bal-asubramanian K., Rajeswari N.
Parameter optimization for insert blow-hole defect in piston die casting through DOE
International Journal of Applied Engineering Research
Vol-10;Issue No:9;Page No:22413-22522
17 Rajendran S., Bal-asubramanian K., Rajeswari N.
Application of metaheuristic approach in parallel flow line scheduling
International Journal of Applied Engineering Research
Vol-10;Issue No:9;Page No:22843-22851
18 Pugazhenthi N., Ku-mar A.S., Babu K.M., Suresh Kumar K.
Mechanical properties of urea-Formaldehyde reinforced with nano - Hydroxy apatite
International Journal of Applied Engineering Research
Vol-10;Issue No:50;Page No:276-280
19 Sathyamurthy R., El-Agouz S.A., Dharma-raj V.
Experimental analysis of a portable solar still with evaporation and condensation chambers
Desalination Vol-367;Issue No:;Page No:180-185
SCOPUS PUBLICATION
PATENTS
S.NO DATE APPLICATION
NO TITLE STUDENT NAME
INTERNAL FACULTY GUIDE
1 18.06.2015
3047/
CHE/2015 Versatile Bicycle
C.Shyam,
S. Lakshmanan K.Saravana Muthu
P.Santhosh
2 06.04.2016 201641012086 Sun tracking using Solar PV module
Subramaniyan.R
D. Sathish Kumar
M.Sivaprakash
M.Saravanan
M.Dinesh
3 04.07.2016
201641022879
Design and Fabrication of compressed Air Engine
N.Vishnu
R.Paul Linga Pra-kash K.Ranjith
R.Akash
4 20.07.2016
201641024775
Design and Fabrication of Underwater Robot(ROV)
Vignesh.N.S
A.Thamariselvan Kamaesh.S
Sasi Kumar.R
Jagathish Kumar
5 06.04.2016 201641012087 Design and Fabrication of Seed Feeder
M.Sivaprakash
D. Sathish Kumar M.Saravanan
M.Dinesh
WORKSHOP
SNO DATE NAME OF THE TOPIC RESOURCE
PERSON NAME
1 16.06.15 Solid Waste
Management Association With TNSCST
SEMINAR
SNO DATE NAME OF THE
TOPIC RESOURCE PERSON
NAME DESIGNATION, PLACE
1 26.06.15 Computer Aided Design – Demo of Software
Mr. Bijille Branch Manager KKM Software
FDP ORGANISED BY DEPARTMENT
SNO DATE DEPT NAME OF THE
TOPIC
RESOURCE
PERSON
VENUE
1 10.06.15
to 18.06.15
MECH CAD-Computer
Aided Design
Mr. A Tha-
marai Sel-
van
Seminar
Hall.VTMT
EVENT ORGANIZED FOR STUDENTS
SNO
DATE
EVENT
EVENT ORGANISER
1 03.07.15 SAE TIER -1 Competition Mr.A.Thamaraiselvan
NATIONAL CONFERENCE ON TRENDS AND INNOVATIONS IN CIVIL AND MECHANICAL ENGINEERING (NCTICM 2k15) on 26.09.15
CUO KALPANA 4 (TN) AIR SQN (TECH) CSUO SANJAY S
4 (TN) AIR SQN (TECH) NCC
STUDENTS‘ PERFORMANCE Active Participation of Students in NCC / NSS
Plantation of Tree at Kanniamman Nagar, village near-by campus
Plantation of Tree at Veerapuram, village near-by campus