VISION OF THE DEPARTMENT - VEL TECH MULTI …...2017/10/31 · Our Students have visited various...
Transcript of VISION OF THE DEPARTMENT - VEL TECH MULTI …...2017/10/31 · Our Students have visited various...
VISION OF THE DEPARTMENT
To become a centre of eminence in educating students to become
triumphant mechanical engineers.
MISSION OF THE DEPARTMENT
To endue the students with the fundamentals of mechanical
engineering with a passion for lifelong learning of industry practices.
To propagate lifelong learning.
To impart the right proportion of knowledge blended with attitudes
and ethics in students to enable them take up positions of responsibil-
ity in the society and make significant contributions.
PRINCIPAL MESSAGE
Dr.V.Rajamani M.E., Ph.D Principal
I am very proud and delighted to release the 1st edition of the ‘’IGNITION-2014-15’, the Newsletter of the Department of Mechanical
Engineering, which embraces the Achievements of the faculty members and the students. I am very happy to meet you through this page. Vel Tech Multi Tech has stood above the rest in its approach to education and in its pedagogies. The ways we teach and the ways our students learn are unique and creative. Education is not an act of acquiring knowledge but learning a skill to lead life and forming one’s personali-ty. Many constructive efforts have been taken to improve our college re-sults. As campus placements are progressing, efforts to groom the stu-dents to serve the society are also in pace. I can boldly say that the De-partment of Mechanical Engineering has excelled in every initiative that has been undertaken and have stood together in facing the challenges in realizing quality education. I wish to record my hearty congratula-tions to those who have brought laurels to the institution and I appreci-ate all of you for working together as a team for the success of this Newsletter.
The Department of Mechanical Engineering is a fledgling department start-
ed in the institution during the year 2006.
This Department was started with an objective to impart high quality
education in Mechanical Engineering with the initial 60 and increased to
120 in the year 2008.
The department has state-of-art labs and qualified Faculty Members
(2professors, 2 Associate Professors and 20 Assistant Professors) with
passion for both teaching and research.
Students are taught with the help of various teaching aids like smart
classrooms, LCD projector, NPTEL, Educational DVD’s, Video
Conferencing, EDUSAT, Language Communication lab and knowledge
Resource centre.
Our Students have visited various industries like Ashok Leyland, Wabco,
TVS, TAFE, Hyundai Motors Company, Heavy Vehicles Factory, Addison
Tools Limed, etc.,
Our students have undergone Implant Training in various industries such
as India Piston, Ashok Leyland, Greaves Cotton Limited, Chennai Port Trust,
Tata Motors, Ford, Royal Enfield, etc.,
ABOUT THE DEPARTMENT
DEPARTMENT HIGHLIGHTS
PATENTS : We have filed our patent for Free Wheel Engine project,
Guided by our faculty, Mr. Paul Linga Prakash.
NATIONAL KART RACEING CIRCUIT : Students participated in the Na-
tional Kart Racing Circuit in Bhopal and won prizes.
RESEARCH LAB : HYUNDAI Sponsored Research Laboratory Facility is
set up to inculcate the knowledge of the students beyond syllabus catering
to Industry Needs
PUBLICATIONS : 16+ Publications in SCOPUS Indexed and 105
Publications in other referred journals.
PROFESSIONAL SOCIETY : Active Member of SAE and Active Participation
in Professional Body Events
INNOVATION : Students have established themselves as strong Innova-
tors and won many awards participating across the nation.
HIGHER EDUCATION : Continuous Motivation from the Department for
students to pursue higher studies.
Achievements
NATIONAL KART RACING CHAMPIONSHIP 2015 (Season -1) TEAM OPTIMUS
Venue : RPM International Kart Racing Circuit, Bhopal Date : 23rd to 25th January, 2015
GUEST LECTURE
S.No Date Subject Guest Details
1 10-09-2014 Internal Combus-tion Engines
Dr.Nanjapa Chetty,Professor Dept of Automobile Engg,VelTech University
2 31-07-2014 Dynamics of Machinery
Dr.K.Jayaraman,MIT Campus, Anna University
3 14-03-2015 Alternative Energy Resources
Dr.K.AnnamalaiAsst.Prof MIT AU
4 07-03-2015 Shear Force & Bending Moments in Beams
Dr.Jayaraman, Visting Prof.,MIT Campus, Anna Uni-versity
RANK HOLDERS 2010-2014 SNO NAME VM NO CGPA
1 AMRIT S 5565 8.6
2 MANOJ C 5647 8.5
3 DHANA BALAN T 5583 8.5
4 SURENDAR D 5625 8.4
5 PRAVEEN R 5607 8.2
INDUSTRIAL VISIT
S.No Date of
Visit Name of the Company
Year / Semes-
ter
Accompanying Staff
1 08.08.14 Amalgamation Repco Limited III Mr.T.Moorthy, Mr.S.Lakshaman
2 08.08.14 Greeves Cotton Limited Vel-lore
VII Mr.D.Satish kumar, Mr.M.Logesh
3 07.08.14 Amalgamation Repco Limited III Mr.R.Vigneshwaran, Mr.A.Thanesh
Greeves Cotton Limited Vellore Amalgamation Repco Limited
SCOPUS PUBLICATION
S.No Authors Title Source title Volume, Issue No & Page No
1
Selvamani S.T., Vigneswar K., Hariku-maran K., Premkumar S., Umanath K.
Sensitivity analysis of friction welded AISI52100 grade carbon steel rods
2014 International Confer-ence on Science Engineering and Management Research, ICSEMR 2014
Vol-;Issue No:;Page No:-
2 Palani S., Kesavanarayana Y.
Prediction of surface roughness in end milling process by machine vi-sion using neuro fuzzy network
2014 International Confer-ence on Science Engineering and Management Research, ICSEMR 2014
Vol-;Issue No:;Page No:-
3
Muthukumar S., Mathiyalagan P., Mariappan R., Jayave-lu S.
Dry sliding wear and friction of aluminium alloy silicon carbide particulates reinforced composites
International Journal of Vehi-cle Structures and Systems
Vol-6;Issue No:3;Page No:82-87
4 Muthukumar S., Mathiyalagan P., Jaya-velu S., Palani S.
Characterizing the dry sliding friction and wear behavior of Al-SiCPcomposite
International Journal of Ap-plied Engineering Research
Vol-9;Issue No:24;Page No:27871-27878
5 Selvamani S.T., Uman-at K., Palanikumar K., Vigneswar K.
Developing a mathemat-ical model to predict tensile properties of friction welded AISI
Advanced Materials Re-search
Vol-984-985;Issue No:;Page No:608-612
6
Selvamani S.T., Umanath K., Palani Kumar K., Vigneswar K., Ghosh S.K.
Analysis of AISI 1035 grade joints welded fric-tionally with varying forging pressure
Applied Mechanics and Mate-rials
Vol-592-594;Issue No:;Page No:63-66
7
Selvamani S.T., Umanath K., Palani Kumar K., Vigneswar K.
Developing empirical relationships to predict tensile properties of friction welded AISI
Applied Mechanics and Mate-rials
Vol-592-594;Issue No:;Page No:144-147
8 Selvamani S.T., Pal-anikumar K.
Optimizing the friction welding parameters to attain maximum tensile strength in AISI 1035
Measurement: Journal of the International Measurement Confederation
Vol-53;Issue No:;Page No:10-21
9
Nagarajan P.K., Vijaya-kumar D., Paulson V., Chitharthan R.K., Na-rashimulu Y., Ra-manarayanan, Sathy-
Performance evaluation of triangular pyramid solar still for en-hancing productivity of fresh water
Research Journal of Pharma-ceutical, Biological and Chemical Sciences
Vol-5;Issue No:2;Page No:764-771
10
Nagarajan P.K., Vijaya-kumar D., Paulson V., Chitharthan R.K., Na-rashimulu Y., Ra-manarayanan, Sathy-amurthy
Theoretical characteriza-tion of ethylene glycol nano fluid for automobiles
Research Journal of Pharma-ceutical, Biological and Chemi-cal Sciences
Vol-5;Issue No:2;Page No:772-777
PATENTS
SCOPUS PUBLICATION
S.No Authors Title Source title Volume, Issue No & Page No
11 Selvamani S.T., Umanath K., Palanikumar K., Vigneswar K.
The microhardness analy-sis of friction welded AISI 52100 grade carbon steel joints
Advanced Materials Re-search
Vol-984-985;Issue No:;Page No:613-617
12 Vinayagamoorthy R., Ra-jeswari N., Vijayshankar S., Balasubramanian K.
Drilling performance in-vestigations on hybrid composites by using D-optimal design
International Review of Mechanical Engineering
Vol-8;Issue No:5;Page No:952-961
13 Vinayagamoorthy R., Ra-jeswari N., Karuppiah B.
Optimization studies on thrust force and torque during drilling of natural fiber reinforced sandwich composites
Jordan Journal of Mechani-cal and Industrial Engi-neering
Vol-8;Issue No:6;Page No:385-392
14
Sathyamurthy R., Nagara-jan P.K., Subramani J., Vi-jayakumar D., Mohammed Ashraf Ali K.
Effect of water mass on triangular pyramid solar still using phase change material as storage medi-
Energy Procedia Vol-61;Issue No:;Page No:2224-2228
15 Rajarasalnath S., Bal-asubramanian K., Ra-jeswari N.
Optimization of process parameters in sleeve syn-chronizer groove turning (Hard turning) for better surface finish and produc-tivity using TGRA a €“ A practical investigation
International Journal of Applied Engineering Re-search
Vol-9;Issue No:24;Page No:27243-27254
16 Puhan S., Gopinath A., Sai-ram K.
Simultaneous reduction of nox and smoke using wa-ter emulsion of Karanji oil methyl ester in a di diesel engine with exhaust gas recirculation
Biodiesel: Blends, Proper-ties and Applications
Vol-;Issue No:;Page No:266-282
S.NO DATE APPLICATION
NO TITLE STUDENT NAME
INTERNAL FACULTY GUIDE
1 10.04.2015 1882/
CHE/2015 Free Wheel Engine
A.V.Suriya
R.Paul Linga Prakash
T.Sundar
S.Loga Prasan-
EVENTS ORGANISED FOR STUDENTS
S.No Date Title Resource Person
1 29-07-2014 Recent advancement in Mechatronics
Dr.V.Ananda Krishnan, NIT Trichy
2 11-03-2015 Basics & Advance-ments in Automobiles
Dr.P.Nanjappa Chetty Ph.D, Dept of Automobile Engg, Vel Tech Dr.RR Dr.SR Technical University
3 18-04-2015 Basics & Advance-ment in Wind Turbine Design
Mr.Deepak Krishnan, Lead & Site Head, Validations & Concept De-velopment, Vestas Turbine R&D Chennai Pvt Ltd.
4 12-10-2014 An Overview In New Product Develop-ment Technologies
K.SATHIYA, Senior Manag-er,Design and development, FRICTECH INDIA PVT. LTD
STUDENTS ACHEIVEMENTS
B.E Mechanical Cricket Team, 3rd place in STATE LEVEL CRICKET TROPHY - 2014
Mohammed Shaheen
International Best Cricketer Award
B.E.Mechanical Volley Ball team has participated in” VTU- IPSA France Sports meet”
STUDENTS ACHEIVEMENTS
Mr.Shyam C (2011-2015 Batch), B.E- Mechanical
3rd year student has won 3rd prize in “CII AWARD
2014” for the project “VERSATILE BICYCLE”
and filed patent
Mr. Chetan Rajput, Mr. Vigneswar & Mr. Abubackar
designed a Multipurpose Wheel
Chair Basics & Advancement in Wind Turbine Design Mr.Deepak Krishnan, Lead & Site Head, Validations & Concept Development, Vestas Turbine R&D Chennai Pvt Ltd.
18-03-2013 18-03-2013
Mr.Saravana Prasath 1st prize in Long
Jump & Triple Jump in “ANNA
UNIVERSITY ZONAL ATHLETIC MEET”
FACULTY PUBLICATIONS
S.NO TITLE PUBLICATION
DETAILS YEAR
1
R.Vinayagamoorthy, And K.Balasubramanian, “Optimization Studies on Thrust Force and Torque during Drilling of Natural Fiber Reinforced Sandwich Composites”, International Jour-nal ,Jordan Journal of Mechanical and Industrial Engineering, "ISSN: 1995-6665,SCOPUS", pp 385-392 December 2014
INTERNATIONAL JOURNAL
2014
2
S.Rajarasalnath, K.Balasubramanian, and N.Rajeswari, “Optimization of Process Parameters in Sleeve Synchronizer turning (Hard turning) for better surface finish and productivity using TGRA- A Practical In-vestigation”, International Journal ,International Journal of Applied Engineering. Research,"ISSN : 27243-27254 2014
INTERNATIONAL JOURNAL
2014
3
S.Rajarasalnath, K.Balasubramanian, and N.Rajeswari, “Optimization of Process Parameters in Sleeve Synchronizer turning (Hard turning) for better surface finish and productivity using TGRA- A Practical In-vestigation”, International Journal ,International Journal of Applied Engineering. Re search,"ISSN : 27243-27254 2014
INTERNATIONAL JOURNAL
2014
4
S.Ravishankar, P.K. Nagarajan, D.Vijayakumar, M.K.Jawahar, Phase Change Material on Augmentation of Fresh Water Production Using Pyramid Solar Still,International ,International Journal of Renewable Energy Development(IJRED),"ISSN:2252-4940, Google scholar ", pp 115-120 September 2015
INTERNATIONAL JOURNAL
2015
5
S.T.Selvamani,"K. Umanath,K. Palanikumar and K.Vigneshwar",Analysis of AISI1035 Grade joints welded frictionally with varying forging pressure,International,Int.Mech.Engg. Con-gress2014,Google Scholar,2014
INTERNATIONAL CONFERENCE
2014
6
S.T.Selvamani,"K. Umanath,K. Palanikumar and K.Vigneshwar, Devel-oping empirical relationship to predict tensile properties of friction welded AISI 52100 grade steel rods, International, Int. Mech.Engg. Congress2014,Google Scholar,2014
INTERNATIONAL CONFERENCE
2014
7 K. Umanath, K. Palanikumar, S.T.Selvamani,Microstructure Analysis of Aluminium Based Hybrid Metal Matrix Composite, International, IC-MCT2014, Google Scholar,2014
INTERNATIONAL CONFERENCE
2014
8
M.Vigneshwar, S.Divagar,S.T.Selvamani, “Influence Of Dual Nano Par-ticles On High Strength Aircraft Aluminum Metal Matrix Nanocomposites Produced By Stir Casting Method”, International Conference On Re-cent Advancements In Materials (ICRAM)
INTERNATIONAL CONFERENCE
2015
9
S.T.Selvamani, K.Palanikumar, K. Shanmugam, S.Divagar, M. Vigneshwar, 2015, “The relationship between tensile and fatigue strength of friction welded steel joint”, International Mechanical Engi-neering Congress & Exposition ASME, USA. IMECE2015
INTERNATIONAL CONFERENCE
2015
10
T.Moorthy, M.Vigneshwar, S.Divagar, S.T.Selvamani, “Performance and Emission Evaluation of VCR Diesel Engine Using Mahua Oil Me-thyl Ester”, National conference on Trends & Innovations in Civil & Mechanical ('NCTICM'2k15''), Vel Tech Multi Tech Engg College, Chen-nai, ISBN: 978- 93-84193-29-4, pp.260-264, 09/2015.
NATIONAL CONFERENCE
2015
STUDENTS PUBLICATIONS
S.NO TITLE PUBLICATION
DETAILS YEAR
1 Shyam.C, Saravana Muthu. K Santhosh. P.S.Lakshmanan,", Versatile Bicycle, International, "International Journal of Engineering Technolo-gy, Management and Applied Sciences", ISSN 2349,2014
INTERNATIONAL JOURNAL
2015
2
Palani.S, JohnstephenR, Logesh.H, Selvam M, Kaushik Manda “ Design and development of JIG for Making Anchor Head in three Axis Vertical Milling Machine ” International Journal of Applied Engineering Re-search, ISSN 0973-4562 Vol. 10 No.83 (2015), PP: 129 – 132
INTERNATIONAL JOURNAL
2015
3
Selvam M, Ganapathy srinivasan R, Palani S, Daniel Charles J, Kesavan, “ Investigation of Glass Fiber Reinforced Plastic with Aluminium using Finite Element Method for Automotive Applications”, International Journal of Applied Engineering Research, ISSN 0973-4562 Vol. 10 No.83 (2015), PP: 31-35
INTERNATIONAL JOURNAL
2015
4
S.T.Selvamani,"K. Umanath , K. palanikumar, Vinoth kumar P and Madhu. G, " Developing the empirical relationship to predict the minimum microhardness of AISI 1020 Grade low carbon steel joints" International,Applied Mechanics and Materials,"ISSN: 1662-748
INTERNATIONAL JOURNAL
2015
5
M.Vigneshwar, S.Divagar, S.T.Selvamani, “The Micro hardness Behav-ior of Metal Matrix Nano Composites for Aerospace Application.”, International Journal of Applied Engineering Research, ISSN: 0973-4562 Vol. 10 No.67 (2015).
INTERNATIONAL JOURNAL
2015
6
S.Palani ,S.Muthukumar Kesavanarayana, Y", Prediction of surface roughness in end milling process by machine vision using neuron fuzzy network, International Conference, Proceedings of IEEE confer-ence,"ISBN:978-1-4799- 7614-0, SCOPUS, November 2014
INTERNATIONAL CONFERENCE
2015
7
S.T.Selvamani,"K. Umanath,K. Palanikumar and K.Vigneshwar ,Developing a Mathematical Model to Predict Tensile Properties of Friction Welded AISI 1035 Grade Steel Rods, International, ICRAMID2014, Google Scholar,2014
INTERNATIONAL CONFERENCE
2015
8
S.T.Selvamani, K.Palanikumar, V.Balasubramaniam, S.Divagar M.Vigneshwar,“Establishing The Relationship Between Friction Weld-ing Parameters And Properties Of Fully Deformed Zone (FDZ) Of Aero-space Steel Autogeneous Joints”,International Conference On Advanc-es In Mechanical Engineering, University College Of Engineering, Villupuram, India, Vol-2, pp.887- 899,ISBN: 978-93-854773-00. 2015
INTERNATIONAL CONFERENCE
2015
9
M.Vigneshwar, S.Divagar,S.T.Selvamani, “Influence Of Dual Nano Parti-cles On High Strength Aircraft Aluminum Metal Matrix Nanocompo-sites Produced By Stir Casting Method”, International Conference On Recent Advancements In Materials (ICRAM-15), Anna university-BIT Campus, Tiruchirappalli, India, pp.7, ISBN: 978-81-931519-07.
INTERNATIONAL CONFERENCE
2015
10
M.Vigneshwar, S.Divagar, S.T.Selvamani, “Microhardness Analysis on Nano Metal Matrix Composite (AA7075+SiC10% + Al2O3 5%) Pro-duced By Stir Casting Method For Aerospace Application”, One Day National Conference On Nanomaterials And Their Applications, Gov-ernment College Of Technology, Coimbatore, (NCNMA-15) July.(2015)
NATIONAL CONFERENCE
2015