Rexnord 6000 Series SHURLOK With New Spyglass...

RReexxnnoorrdd®® 66000000 SSeerriieess SSHHUURRLLOOKK™™

AAddaapptteerr MMoouunntt RRoolllleerr BBeeaarriinnggssWWiitthh NNeeww SSppyyggllaassss™™ OOppttiiccaallSSttrraaiinn SSeennssoorr ((EEnngglliisshh--IInncchh))

Not Installed

Installed

2

REXNORD® ROLLER BEARINGS Rugged. Responsive. Reliable

Rexnord is proud to announce the new Rexnord®

6000 Series SHURLOK™ Adapter Mount RollerBearing. Increase your operation’s efficiency and

profitability by reducing installation errors,

maintenance costs, and down time. The

bearing’s rugged and adaptable design make it

excellent for mining, aggregate production,

forest products, and other demanding

applications.

The innovative new Rexnord 6000 Series

SHURLOK Adapter Mount Roller Bearing

requires less lubrication and is ideal for ISO

14000 compliance.

Shaft mounting errors are a thing of the past

with the breakthrough proprietary Spyglass™Optical Strain Sensor (OSS).

A Positive Locking feature and single housing

construction also provide easy installation and

removal, and enable use of inexpensive

commercial grade shafting.

SHURLOK bearings are available in all Rexnord

housings for shaft sizes from 1-15/16 inches to

4-15/16 inches. It also has auxiliary end cap

seal configurations and three interchangeable

seal options to meet unique application needs.

• 25% greater shaft grip means less vibration and

maintenance.

• Quick release feature allows easy removal for maintenance,

plus the adapter assembly with Spyglass™ OSS can be

reused.

• Positive Locking system maintains shaft mount tightness,

eliminating the need for later mounting inspections.

• Spyglass OSS takes the guesswork out of installation,

eliminating damage to the shaft caused by loose mounting.

ZA 6000 Imperial®VS.

• Spyglass OSS eliminates the subjectivity of determining shaft

mounting tightness.

• Rugged one-piece housing decreases installation/removal

time by as much as 4 times versus SAF models.

• Factory pre-lubricated elements require 4 times less annual

lubrication than SAF models - ISO 14000 friendly!

• Factory pre-set clearances. Solid housed units with factory

pre-set clearances reduce installation time up to 4 times!

ZAF 6000 SAFVS.

3

Featuring Rexnord’s NEW SHURLOK™ Adapter MountsTaking the mystery out of mounting

Spyglass™ Optical Strain Sensor (OSS)Technology reduces installation errors

by changing color when tight

Easy Installation: Simply

tighten the locknut until the

Spyglass™ shows proper indication

Super-finished raceways provide

a cool running, quiet, high speed

and high load capacity bearing

Hour Glass Roller elements are precision

ground and super finished to provide

longer bearing life

Positive Locking System allows

minimal vibration during operation,

therefore not requiring scheduled

inspections for snugness of

mountings

Auxiliary end caps & three field interchangeable seal options ensures

long bearing life through a full range of

applications

Adapter sleeve assembly allows

easy installation/removal, plus

enables use of commercial grade

shafts

X

X

Y

Y

Mounting locknut utilizing Spyglass OSSPositive Locking System

Rexnord 6000 Series SHURLOK Roller Bearings are also Available with these Housings

Pillow Block Flanged Units Flanged Cartridge Takeup Units Takeup Assemblies

Not Installed

Installed

Self aligning spherical roller bearingprovides a total of 3 degrees static and

dynamic misalignment

Page

Adapter Mount ZA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Adapter Mount ZAS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Adapter Mount ZAF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Adapter Mount ZAFS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Adapter Mount ZEP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Adapter Mount ZP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Adapter Mount ZPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Page

Adapter Mount ZB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Adapter Mount ZEF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Adapter Mount ZF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Adapter Mount ZFS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Page

Adapter Mount ZBR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

4 (1070) © Rexnord Industries, LLC, 2007

SELF-ALIGNING ROLLER BEARINGS

PILLOW BLOCKS

FLANGE BLOCKS

FLANGE CARTRIDGE BLOCKS

ZA ZAF

ZBR

ZB ZEF

ZBR

© Rexnord Industries, LLC, 2007 (1070) 5

Pages

Adapter Mount Center Pull ZT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Page

Normal Duty Protected Screw ZNT . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

TAKE-UPS

ZHT ZNT

Page

Adapter Mount Center Pull ZHT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

TAKE-UP BLOCKS

ZT

CARTRIDGE BLOCKS

Page

Normal Duty Protected Screw ZMC. . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Page

Adapter Mount Center Pull ZCS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

ZCS ZMC

ZT


NOMENCLATURE

Rexnord

Seal TypeZ Clearance seal Z

K Light contact seal K

M Heavy contact seal M

HousingType

A Pillow block normal duty A

AS Pillow block floating AS

AF Pillow block, heavy duty AF

AFS Pillow block, floating AFS

P Pillow block, heavy duty P

PS Pillow block, floating PS

EP Pillow block, Type E EP

B Flange block, normal duty B

EF Flange block, Type E EF

F Flange block, heavy duty F

FS Flange block, floating FS

BR Flange cartridge block BR

CS Cartridge block CS

MC Cartridge block MC

BearingType 6 6000 Series, tapered

adapter sleeve 6000

ShaftDiameter 207 2-7/16 — last two digits in

16th of an inch 207

2076-AZ

STANDARD PREFIX AND SUFFIX IDENTIFICATION

2076-AZA 207 F

Prefixes

A- Two open auxiliary end cap seals.

B- Two auxiliary end cap seals (one open, one closed)

Suffixes (Added after shaft size designation)

-A One open auxiliary end cap seal (cover side)

-B One closed auxiliary end cap seal (cover side)

-F Four bolt (pillow blocks only)

-G Face-locked threaded cover

-S Machined pilot on face of flange units

-Y Redesigned shaft size — Not interchangeable

-For identification of all other numerical suffixes, contact local Rexnord office


Seal TypeZ Clearance seal

K Light contact seal

M Heavy contact seal

HousingType

N Block for protected screw frame

T Block for center pull frame

NT Protected screw take-up

HT Heavy duty center, pull take-up

Take-upFrame Size 11 Size Code (from specification page)

ShaftDiameter 315 3-15/16” — last two digits in 16th of an inch

Take-upTravel 24 Inches of take-up adjustment

6-11HTZ 315 24-

TAKE-UP NOMENCLATURE


Rexnord Dodge SKF

HousingType

APB2-IP

SYR-NHPB4-IP

ASP2B-IP Suffix E

SYR-NP2B-IP Suffix E

AF P2B500-ISAF SAF22500P4B500-ISAF

AFS P2B500-ISAF Suffix E SAF22500P4B500-ISAF Suffix E

P

PS

EPEP2B-IP SYE-NHEP4B-IP FSYE-NH

B F3R-IP F4R-IP

EF EF4B-IP

F F4S-IP

FS F4S-IP Suffix E

BR FC-IP

CS

MC

BearingType 6000 IP-(Imperial) N-(CONCENTRA)

ShaftDiameter 207 207 2-7/16

INTERCHANGE GUIDE

2076AZ

Rexnord Dodge SKF

Housing Type

N

T WSTU-IP TBR-NH

NT TP TRH-NHPA

HT CP

Take-upFrame Size 11

ShaftDiameter 315 315 3-15/16

Take-upTravel 24 24 24

2076-11HTZ 315 24-

TAKE-UP INTERCHANGE GUIDE

-


INTERCHANGEABLE SEALS

Effective seals are essential to insure satisfactory bearing life in various application environments. Three interchangeable,standard seals are available to cover a broad range ofconditions. All Rex seals assure sealing protection up to a total of 3 degrees misalignment in all directions. Sealing is on hardened andground inner ring extensions. Rex seals cannot be forced outduring relubrication, yet can easily be removed when replacingor when inspecting grease.

All Rexnord interchangeable seals:• provide sealing up to a total of 3 degrees misalignment• operate on hardened and ground inner ring extension• cannot be forced out during relubrication• can be easily removed without damage• can be removed without bearing disassembly

SEAL TYPES

“M” SealHeavy Contact

“K” SealLight Contact

“Z” SealClearance

Denoted with a “Z” prefix in the model number.The standard seal used in the majority ofapplications.

• No frictional drag — generates no heat

• No speed limitations

• All metal — no temperature limitations

Substitute prefix “K” for “Z” in model number.Molded nitrile rubber lip seals out contaminants.

• Protects against contaminants

• Handles high speeds

• Less drag and heat generation than heavycontact seals

• Only available on Size Codes 6-11

Substitute prefix “M” for “Z” in model number.Premium elastomer, spring loaded contact lip.

• Protects against liquids and grit

• Spring loaded lip assures constantcontact-even during misalignment

• Molded-in garter spring retains seal in housing

• Seals in lubricant on horizontal and verticalshafts

• Available in viton material

AUXILIARY END CAP SEALS

5-Point Protection Plan

Rexnord auxiliary end caps increase the life ofcritical bearings and reduce costly downtime by sealing out harmful contaminants. Auxiliary end caps provide five independent barriers toexclude all types of contaminants.

Seal 1. A Nitrile rubber V-ring seal is press fit onto the shaft against the machined face of theauxiliary end cap. The V-ring seal rotates with theshaft to act as a slinger as well as a contact seal.

Seal 2. The machined multi-groove labyrinthprovides a second barrier without damagingexpensive shafts.

Seal 3. The large cavity can be left empty to trap dry contaminants or filled with grease to repel moisture.Seal 4. A pliable neoprene gasket provides apositive static seal between the cap and thehousing.Seal 5. The primary bearing seal is left inposition to provide a final barrier. The Z, K, or Mseal may be chosen to best fit the application.

Recommended for severe environments— they provide supplemental protection for the primary seal.

• Seals against liquids and grittycontaminants. Particularly effective againstwater washdown, taconite, cement, sand, or caking build-up.

• Provides safety, encloses rotating mountinghardware

• Protects primary seal from physical damage

• May be filled with grease to provide purgingaction

• Available as open or closed end cap

Auxiliary End Cap Seals

See Standard Prefix and Suffix Identification, Page 8.

1 2 3 4 5


Specifications . . . Radial Load Ratings are Shown on Page 24 — Floating Units Allow for 3/8" Axial Movement

Shaft SizeInches

CompleteBlockNo.

SizeCode

Dimensions in Inches Bolts Req’d Complete

BlockNet Wt

LbA

B C E F G H I J K L W No. SizeFixed Floating +/-0.005

1-15/16 ZA-6115 ZAS-61156 2-1/4 6-1/4 3-41/64 1-1/8

8-1/8 2-7/16 1-1/4 . . . 15/164-9/16 2-5/16 2-55/64

2 5/8 10.91-15/16 ZA-6115-F ZAS-6115-F 8-3/8 3-3/16 1-3/8 1-9/16 13/16 4 1/2 11.72-3/16 ZA-6203 ZAS-6203

7 2-1/2 6-3/4 3-49/64 1-5/328-5/8 2-9/16 1-3/8 . . . 1

5 2-5/8 3-15/642 5/8 12.9

2-3/16 ZA-6203-F ZAS-6203-F 8-7/8 3-1/4 1-5/8 1-11/16 13/16 4 1/2 15.32-3/8 ZA-6206 ZAS-6206

8 2-3/4 7-1/8 4-5/32 1-27/64

9-1/8 2-5/8 1-5/8 . . . 1

5-1/2 2-29/32 3-19/32

2 5/8 16.12-3/8 ZA-6206-F ZAS-6206-F 9-1/4 3-3/8 1-3/4 1-3/4 13/16 4 1/2 16.92-7/16 ZA-6207 ZAS-6207 9-1/8 2-5/8 1-5/8 . . . 1 2 5/8 16.32-7/16 ZA-6207-F ZAS-6207-F 9-1/4 3-3/8 1-3/4 1-3/4 13/16 4 1/2 16.62-11/16 ZA-6211 ZAS-6211

9 3-1/4 8-1/8 4-17/32 1-25/64

10-3/8 3-3/16 1-11/16 . . . 1-1/8

6-7/16 3-3/8 4-3/32

2 3/4 27.32-11/16 ZA-6211-F ZAS-6211-F 10-7/16 3-3/4 2-1/4 1-7/8 15/16 4 5/8 28.02-3/4 ZA-6212 ZAS-6212 10-3/8 3-3/16 1-11/16 . . . 1-1/8 2 3/4 26.92-3/4 ZA-6212-F ZAS-6212-F 10-7/16 3-3/4 2-1/4 1-7/8 15/16 4 5/8 26.82-15/16 ZA-6215 ZAS-6215 10-3/8 3-3/16 1-11/16 . . . 1-1/8 2 3/4 26.02-15/16 ZA-6215-F ZAS-6215-F 10-7/16 3-3/4 2-1/4 1-7/8 15/16 4 5/8 26.83-3/16 ZA-6303 ZAS-6303

10 3-3/4 10 5-9/64 1-19/32

13-3/16 3-7/16 1-7/8 . . . 1-5/8

7-1/2 3-31/32 4-61/64

2 7/8 41.83-3/16 ZA-6303-F ZAS-6303-F 13 4-1/8 2-1/4 2 1-1/2 4 3/4 42.13-7/16 ZA-6307 ZAS-6307 13-3/16 3-7/16 1-7/8 . . . 1-5/8 2 7/8 40.33-7/16 ZA-6307-F ZAS-6307-F 13 4-1/8 2-1/4 2 1-1/2 4 3/4 40.63-11/16 ZA-6311 ZAS-6311

11

4-1/8 10-7/8

5-31/32 1-47/64

14-1/4 4-1/8 2-1/8 . . . 1-3/4 8-1/2

4-9/16 5-43/64

2 1 58.03-11/16 ZA-6311-F ZAS-6311-F 4-1/4 12-1/2 15-1/4 4-1/2 2-5/8 2-1/4 1-1/4 8-5/8 4 3/4 63.03-15/16 ZA-6315 ZAS-6315 4-1/8 10-7/8 14-1/4 4-1/8 2-1/8 . . . 1-3/4 8-1/2 2 1 56.03-15/16 ZA-6315-F ZAS-6315-F 4-1/4 12-1/2 15-1/4 4-1/2 2-5/8 2-1/4 1-1/4 8-5/8 4 3/4 61.0

Bore Size=Nominal Shaft Size +.001 - .000Seals – To Specify K or M seal, replace “Z” in model number with “K” or “M”Auxiliary End Caps – not available ZAS Series

Note: Dimensions subject to change. Certified dimensions of ordered material furnished on request.

ZA/ZAS PILLOW BLOCKS6000 Series

SHURLOK Adapter Mount

E

WC

L

Fixed Block

G

45°

K

A

J

H

FB

GI

W

CL

E

Floating Block


Specifications . . . Radial Load Ratings are Shown on Page 24 — Available Expansion on Floating Units – See Below

ShaftSize

Inches

CompleteBlockNo. Size

Code

Dimensions in Inches Bolts Req’d

Complete BlockNet Wt Lb

Fixed FloatingA B

C E F+/-.0075 G H I J K W No. Size Fixed Floating+/-

0.005 Min Max

2-7/16 ZAF-6207 ZAFS-62078 3-1/4 8-5/8 9-5/8 4-5-32 1-27/64 11.125 3-1/8 1-1/4

. . . 1/1/47 3-19/32

2 5/8 32.5 32.52-7/16 ZAF-6207-F ZAFS-6207-F 1-7/8 1-1/8 4 1/2 31 31.52-11/16 ZAF-6211 ZAFS-6211

9 3-1/2 9-7/8 11 4-17/32 1-25/64 12.594 3-1/2 1. . . 1-7/16

7-5/8 4-3/322 3/4 45.5 45.0

2-11/16 ZAF-6211-F ZAFS-6211-F 2-1/8 1-5/16 4 5/8 44.5 44.52-15/16 ZAF-6215 ZAFS-6215

9 3-3/4 9-7/8 11 4-17/32 1-25/64 12.594 3-1/2 1-1/4. . . 1-7/16

7-7/8 4-3/322 3/4 45.5 45.5

2-15/16 ZAF-6215-F ZAFS-6215-F 2-1/8 1-5/16 4 5/8 45.0 45.53-7/16 ZAF-6307 ZAFS-6307

10 4-1/211-13/16 13-1/8

5-9/64 1-19/32 15.375 4-11/32 1-21/32. . . 1-21/32

9-3/8 4-61/642 7/8 76.5 76.5

3-7/16 ZAF-6307-F ZAFS-6307-F 11-5/8 13-1/8 2-3/8 1-5/8 4 3/4 75.0 75.53-15/16 ZAF-6315-F ZAFS-6315-F 11 4-15/16 12-19/32 14-1/2 5-31/32 1-47/64 16.500 4-3/4 1-25/32 2-3/4 1-53/64 10-5/16 5-43/64 4 3/4 102 1044-7/16 ZAF-6407Y-F ZAFS-6407Y-F 12 6 14-1/2 16 6-1/4 1-7/8 18.375 5-1/8 2-1/16 3-1/4 1-3/4 11-7/8 6-1/16 4 7/8 143 1444-15/16 ZAF-6415-F ZAFS-6415-F 13 6 15-5/8 17-3/8 7-15/16 2-1/4 19.703 5-7/8 2-1/16 3-3/8 1-15/16 12-9/16 6-61/64 4 1 207 209

Bore Size = Norminal Shaft Size +.001 - .000Expansion – Size Code 4-8 is 3/8”. Size Code 9-11 is 1/2”, Size Code 12-13 is 3/4”.Seals – To Specify K or M seal, replace “Z” in model number with “K” or “M” – “K” only available Size Code is 8-11.


ZAF/ZAFS PILLOW BLOCKS6000 Series


W W

30°

L

FloatingFixed Block

G

E E

G

J

H

B

F

A

KC C

Block


ZEP PILLOW BLOCKS6000 Series


C

L W

E

G

E

WL

C

IBF G

K

AH

30°

Specifications . . . Radial Load Ratings are Shown on Page 24

Shaft SizeInches

CompleteBlock

No.SizeCode

Dimensions in Inches Bolts Req’d Complete

BlockNet Wt

LbA B

C E F G H I K L W No. Size+/-0.005 Min Max

1-15/16 ZEP-6115 6 2-1/4 6 7-1/4 3-41/64 1-1/8 8-7/8 2-7/16 1-5/16 . . . 4-7/16 2-5/16 2-55/64 2 5/8 12.12-3/16 ZEP-6203 7 2-1/2 6-1/2 8 3-49/64 1-5/32 9-5/8 2-9/16 1-1/2 . . . 4-15/16 2-5/8 3-15/64 2 5/8 16.52-3/8 ZEP-6206

8 2-3/4

6-7/8

8-3/4 4-5/32 1-27/64 10-1/2

2-5/8

1-5/8

. . . 5-7/16

2-29/32 3-19/32

2

5/8

19.32-3/8 ZEP-6206-F 8-1/4 3-1/2 1-7/8 5-1/2 4 19.42-7/16 ZEP-6207 6 -7/8 2-5/8 . . . 5-7/16 2 18.52-7/16 ZEP-6207-F 8-1/4 3-1/2 1-7/8 5-1/2 4 18.32-11/16 ZEP-6211

9 3-1/8

7-13/16 9-3/4

4-17/32 1-25/64 12

3-3/16

1-7/8

. . .

6-1/4 3-3/8 4-3/32

2 3/4 31.52-11/16 ZEP-6211-F 9-1/8 9-7/8 4 2-1/8 4 5/8 31.02-3/4 ZEP-6212 7-13/16 9-3/4 3-3/16 . . . 2 3/4 31.02-3/4 ZEP-6212-F 9-1/8 9-7/8 4 2-1/8 4 5/8 30.52-15/16 ZEP-6215 7-13/16 9-3/4 3-3/16 . . . 2 3/4 28.72-15/16 ZEP-6215-F 9-1/8 9-7/8 4 2-1/8 4 5/8 28.23-3/16 ZEP-6303

10 3-3/4

9-1/4 11-5/16

5-9/64 1-19/32 14

3-7/16

2-1/4

. . . 7-3/8

3-31/32 4-61/64

2 7/8 47.13-3/16 ZEP-6303-F 10- 9/16 11- 7/16 4-1/2 2-3/8 7-1/2 4 3/4 47.63-7/16 ZEP-6307 9-1/4 11- 5/16 3-7/16 . . . 7-3/8 2 7/8 44.73-7/16 ZEP-6307-F 10-9/16 11- 7/16 4-1/2 2-3/8 7-1/2 4 3/4 45.23-11/16 ZEP-6311-F

11 4-1/4 12 13 5-31/32 1-47/64 15-1/4 4-1/2 2-5/8 2-1/4 8- 5/8 4-9/16 5-43/64 4 3/465.5

3-15/16 ZEP-6315-F 64.8

4-3/16 ZEP-6403Y-F12 4-3/4 12- 7/8 14-1/8 6-1/4 1-7/8 16-1/2 4-5/8 2-3/4 2-1/2 9-3/8 5-1/32 6-1/16 4 3/4

81.0

4-7/16 ZEP-6407Y-F 78.0

4-15/16 ZEP-6415-F 13 5-1/2 14-7/8 16-1/8 7-15/16 2-1/4 18-1/2 5-9/16 3 2-3/4 11-1/8 5-3/4 6-61/64 4 7/8 150.0

Bore Size = Nominal Shaft Size +.001–.000.Seals – to Specify K or M seal, replace "Z" in model number with "K" or "M" – "K" only available size code 6-11.



Specifications . . . Radial Load Ratings are Shown on Page 24— Available Expansion on Floating Units – See Below

ShaftSize

Inches

CompleteBlockNo. Size

Code

Dimensions in Inches Bolts Req’d Complete Block

Net Wt LbA

+/-0.005

B CE

F G H I JK

W No. SizeFixed Floating Fixed Floating Fixed Floating Fixed Floating

1-15/16 ZP-6115 ZPS-61156 2-1/2 7 3-41/64 1-1/8 1 9 -3/4

2-7/8 1-7/16 . . .1-1/4

4-3/4 4-5/162-55/64

2 5/8 13.4 16.11-15/16 ZP-6115-F ZPS-6115-F 4 1 2-1/4 5 5-5/32 4 5/8 15.8 17.72-3/16 ZP-6203 ZPS-6203

7 2-3/4 7-1/2 3-49/64 1-5/32 1-1/16 10-1/4 3-1/8 1-5/8 . . .

1-1/4 5-1/4

5-23/32 3-15/642 5/8 17.5 21.8

2-3/16 ZP-6203-F ZPS-6203-F 4-1/8 1 2-1/4 5-1/2 4 5/8 19.6 22.12-7/16 ZP-6206 ZPS-6206

8 3 8-1/4 4-5/32 1-27/64 1-19/64 11-1/4

3-3/8 1-3/4 . . . 1-3/8 5-3/4 6-3/16

3-19/32

2 3/4 22.2 25.92-7/16 ZP-6206-F ZPS-6206-F 4-1/2 1-1/8 2-5/8 1-15/16 6 6-7/32 4 5/8 25.4 28.42-7/16 ZP-6207 ZPS-6207 3-3/8 1-3/4 . . . 1-3/8 5-3/4 6-3/16 2 3/4 21.2 25.92-7/16 ZP-6207-F ZPS-6207-F 4-1/2 1-1/8 2-5/8 1-15/16 6 6-7/32 4 5/8 24.4 27.42-11/16 ZP-6211 ZPS-6211

9 3-1/2 9-3/4 4-17/32 1-25/64 1-17/64 13

3-7/8 2-1/16 . . . 1-5/8 6-23/32 7-3/16

4-3/32

2 7/8 35.2 43.42-11/16 ZP-6211-F ZPS-6211-F 5 1-3/8 2-3/4 1-1/2 7-1/16 7-5/16 4 3/4 38.2 44.22-3/4 ZP-6212 ZPS-6212 3-7/8 2-1/16 . . . 1-5/8 6-23/32 7-3/16 2 7/8 34.2 42.42-3/4 ZP-6212-F ZPS-6212-F 5 1-3/8 2-3/4 1-1/2 7-1/16 7-5/16 4 3/4 36.5 42.52-15/16 ZP-6215 ZPS-6215 3-7/8 2-1/16 . . . 1-5/8 6-23/32 7-3/16 2 7/8 33.9 42.52-15/16 ZP-6215-F ZPS-6215-F 5 1-3/8 2-3/4 1-1/2 7-1/16 7-5/16 4 3/4 37.2 43.43 -3/16 ZP-6303-F ZPS-6303-F

10 4 11-1/2 5-9/64 1-19/32 1-15/32 15 5 1-1/2 3 1-1/2 8-1/8 8-3/8 4-61/64 4 3/452.0 59.0

3 -7/16 ZP-6307-F ZPS-6307-F 51.0 57.03-11/16 ZP-6311-F ZPS-6311-F

11 5 13-1/4 5-31/32 1-47/64 1-39/64 16-3/4 6 1-1/2 3-1/2 1-1/2 9-7/8 10-1/4 5-43/64 4 7/886.0 98.0

3-15/16 ZP-6315-F ZPS-6315-F 84.0 96.04-3/16 ZP-6403Y-F ZPS-6403Y-F

12 5-3/4 14-3/4 6-1/4 1-7/8 1-3/4 18-1/2 6-3/4 1-3/4 4 1-13/16 11-1/4 11-5/8 6-1/16 4 1110.0 122.0

4-7/16 ZP-6407Y-F ZPS-6407Y-F 118.0 119.04 15/16 ZP-6415-F ZPS-6415-F 13 6-1/8 16 7-15/16 2-1/4 2-1/64 20-1/4 7-1/2 1-7/8 4-1/4 2 12-1/2 13-1/8 6-61/64 4 1-1/8 171.0 206.0

Bore Size = Norminal Shaft Size +.001 - .000Expansion – Size Code 6-8 is 3/8”. Size Code 9-11 is 1/2”, Size Code 12-13 is 3/4”.Seals – To Specify K or M seal, replace “Z” in model number with “K” or “M” – “K” only available Size Code is 6-11.


ZP/ZPS PILLOW BLOCKS6000 Series


CW

H

G

L

E

Fixed Block Floating Block

GI

CK

A

30°

BF

JL W

E



ShaftSize

Inches

CompleteBlockNo. H

SizeCode

Dimensions in Inches Bolts Req’d CompleteBlockNet Wt

LbB C D E G H L R

S+.000-.003

W Y No. Size

4 BOLT ROUND1-15/16 ZB-6115 6 4-1/16 3-41/64 4-1/4 1-1/8 7 11/16 2-5/16 2-7/8 4-3/8 2-55/64 3/32 4 1/2 9.82-3/16 ZB-6203 7 4-1/2 3-49/64 4-7/8 1-5/32 7-3/4 11/16 2-5/8 3-3/16 5 3-15/64 1/8 4 5/8 13.32-3/8 ZB-6206

8 4-49/64 4-5/32 5-3/8 1-27/64 8-1/8 3/4 2-29/32 3-3/8 5-7/16 3-19/32 1/8 4 5/816.7

2-7/16 ZB-6207 16.62-11/16 ZB-6211

9 5-9/16 4-17/32 6-1/4 1-25/64 9-1/2 7/8 3-3/8 3-15/16 6-5/16 4-3/32 1/8 4 3/426.5

2-3/4 ZB-6212 26.12-15/16 ZB-6215 25.6

4 BOLT SQUARE3-3/16 ZB-6303

10 6-23/32 5-9/64 7-3/8 1-19/32 8-7/16 1 3-31/32 4-3/4 7-3/8 4-61/64 1/4 4 3/437.0

3-7/16 ZB-6307 34.63-11/16 ZB-6311

11 7-19/32 5-31/32 8-1/2 1-47/64 9-3/4 1-1/8 4-9/16 5-3/8 8-1/2 5-43/64 1/4 4 7/859.0

3-15/16 ZB-6315 56.0H Pilot – use Suffix S Bore Size = Nominal Shaft Size +.001 - .000

Seals – To specify K or M seal, replace “Z” in model number with “K” or “M”Auxiliary End Caps – Not available in Size Codes 6, and Size Code 7 on the Flange side of non Piloted Bearings

– Not available in Size Code 6, and Size Code 7-9 on the Flange side of Piloted Bearings


ZB FLANGE BLOCKS6000 Series


B

SQUAREG

R

Four Hole SquareFlange Block

Four Hole RoundFlange Block

Full Side ViewFlange Block

Side View FlangeWith Pilot

3/16

S L

H E

W DC

LC

H E

1/8

W D

Y

G

R

B

SQUARE

Y



ShaftSize

Inches

CompleteBlockNo.

SizeCode


LbB C D E G H L R W No. Size

1-15/16 ZEF-6115 6 4-3/8 3-41/64 4-1/2 1-1/8 5-3/8 1-1/2 2-5/16 3-3/32 2-55/64 4 1/2 11.7

2-3/16 ZEF-6203 7 4-7/8 3-49/64 5 1-5/32 6-1/4 1-1/2 2-5/8 3-29/64 3-15/64 4 5/8 15.7

2-3/8 ZEF-62068 5-3/8 4-5/32 5-1/2 1-27/64 6-7/8 1-11/16 2-29/32 3-51/64 3-19/32 4 5/8

18.9

2-7/16 ZEF-6207 18.3

2-11/16 ZEF-6211

9 6 4-17/32 6-1/2 1-25/64 7-3/4 1-13/16 3-3/8 4-1/4 4-3/32 4 3/4

31.1

2-3/4 ZEF-6212 30.1

2-15/16 ZEF-6215 29.6

3-3/16 ZEF-630310 7 5-9/64 7-3/8 1-19/32 9-1/4 1-15/16 3-31/32 4-61/64 4-61/64 4 3/4

44.6

3-7/16 ZEF-6307 42.7

3-11/16 ZEF-631111 7-3/4 5-31/32 8-7/8 1-47/64 10-1/4 2-3/16 4-9/16 5-31/64 5-43/64 4 7/8

66.5

3-15/16 ZEF-6315 65.5

Bore Size = Nominal Shaft Size +.001-.000Seals – To specify K or M seal, replace “Z” in model number with “K” or “M”


ZEF FLANGE BLOCKS6000 Series


H1/8

L W D

E

C

R

BSQUARE

GSQUARE


Specifications . . . Radial Load Ratings are Shown on Page 24— Available Expansion on Floating Units – See Below

ShaftSize

Inches

Complete BlockNo. H Size

Code

Dimensions in Inches BoltsReq’d

Complete BlockNet Wt Lb

B CD E

G H RS +.000 / -.003

WFixed Floating Fixed Floating Fixed Floating Fixed Floating No. Size Fixed Floating

4 Bolt Square

1-15/16 ZF-6115 ZFS-6115 6 4-1/16 3-41/64 4-1/2 5-1/8 1-1/8 1 5-5/16 5/8 2-7/8 4-3/8 5-1/8 2-55/64 4 1/2 10.4 12.8

2-3/16 ZF-6203 ZFS-6203 7 4-1/2 3-49/64 5 5-3/4 1-5/32 1-1/16 5-7/8 11/16 3-3/16 5 5-5/8 3-15/64 4 5/8 14.4 18.0

2-3/8 ZF-6206 ZFS-62068 5-1/32 4-5/32 5-1/2 6 1-27/64 1-19/64 6-7/16 3/4 3-9/16 5-7/16 6 3-19/32 4 5/8

17.8 20.6

2-7/16 ZF-6207 ZFS-6207 17.5 20.3

2-11/16 ZF-6211 ZFS-6211

9 6-1/64 4-17/32 6-1/2 7-1/8 1-25/64 1-17/64 7-3/4 7/8 4-1/4 6-5/16 7-1/8 4-3/32 4 3/4

29.9 35.4

2-3/4 ZF-6212 ZFS-6212 29.2 34.7

2-15/16 ZF-6215 ZFS-6215 28.9 34.1

3-3/16 ZF-6303 ZFS-630310 6-23/32 5-9/64 7-3/8 8 1-19/32 1-15/32 8-7/16 1 4-3/4 7-3/8 8 4-61/64 4 3/4

40.0 47.0

3-7/16 ZF-6307 ZFS-6307 38.0 45.5

3-11/16 ZF-6311 ZFS-631111 8-5/16 5-31/32 8-7/8 9-1/2 1-47/64 1-39/64 10-9/16 1-1/8 5-7/8 8-7/8 9-1/2 5-43/64 4 1

71.0 80.0

3-15/16 ZF-6315 ZFS-6315 69.0 77.0

6 Bolt Round (Holes at 60 Deg)

4-3/16 ZF-6403Y ZFS-6403Y12 6-7/16 6-1/4 9-1/2 11-5/8 1-7/8 1-3/4 15-1/8 1-1/4 6-7/16 10-3/8 11-5/8 6-1/16 6 1

98.0 127

4-7/16 ZF-6407Y ZFS-6407Y 96.0 124

4-15/16 ZF-6415 . . .13 7 7-15/16 11-3/16 12-9/16 2-1/4 2-1/64 16-1/2 1-1/2 7 11-3/16 12-9/16 6-61/64 6

1-1/8 159.0

4-15/16 . . . ZFS-6415 1 184.0

H Pilot – Use Suffix S Bore Size = Nominal Shaft Size +.001 - .000

Expansion – Size Code 6-8 is 3/8”, Size Code 9-11 is 1/2”, Size Code 12-13 is 3/4”Seals – To specify K or M seal, replace “Z” in model number with “K” or “M” – “K” only available Size Code 6-11Auxiliary End Caps – Not available in Size Code 12 ZFS. Also not available in Size Code 6 on the flange side of piloted bearings


ZF/ZFS FLANGE BLOCKS6000 Series


3/16 E

CS W D

Side View FlangeWith Pilot

H

Full Side ViewFlange Block

Fixed

W DC

H

1/8

H

CD

E E

GSQUARE

R

Four HoleSquare Flange

Block

Full Side ViewSquare BlockFloating

BSQUARE



ShaftSize

Inches

CompleteBlockNo.

SizeCode


LbB C E F H M N R

S+.000-.002

W Y No. Size

1-15/16 ZBR-6115 6 3-51/64 3-41/64 1-1/8 6-3/8 9/16 1-9/16 7/8 2-11/16 4.500 2-55/64 2-1/4 4 7/16 9.62-3/16 ZBR-6203 7 4-1/4 3-49/64 1-5/32 7-1/8 9/16 1-3/4 1 3 5.000 3-15/64 2-3/8 4 1/2 13.72-3/8 ZBR-6206

8 4-19/32 4-5/32 1-27/64 7-5/8 5/8 1-13/16 1 3-1/4 5.500 3-19/32 2-9/16 4 1/2 16.2

2-7/16 ZBR-6207 15.92-11/16 ZBR-6211

9 5-19/64 4-17/32 1-25/64 8-3/4 3/4 2 1-1/4 3-3/4 6.375 4-3/32 2-7/8 4 5/8 26.1

2-3/4 ZBR-6212 24.82-15/16 ZBR-6215 22.73-3/16 ZBR-6303

10 6-3/32 5-9/64 1-19/32 10-1/4 15/16 2-3/8 1-1/4 4-5/16 7.375 4-61/64 2-15/16 4 3/4 38.0

3-7/16 ZBR-6307 36.53-11/16 ZBR-6311

11 6-5/8 5-31/32 1-47/64 10-7/8 1-1/8 2-11/16 1-1/2 4-11/16 8.125 5-43/64 3-9/16 4 3/4 56.0

3-15/16 ZBR-6315 53.04-3/16 ZBR-6403Y

12 5-7/8 6-1/4 1-7/8 13-1/2 1 2-5/16 2 5-7/8 10.250 6-1/16 3-15/16 6 3/4 84.0

4-7/16 ZBR-6407Y 83.04-15/16 ZBR-6415 13 6-3/8 7-15/16 2-1/4 14-3/4 1-1/4 2-31/32 2-1/4 6-3/8 11.000 6-61/64 4-29/32 6 7/8 128.0

Bore Size = Nominal Shaft Size +.001 - .000Seals – To specify K or M seal, replace “Z” in model number with “K” or “M” – “K” only available Size Code 6-11


ZBR FLANGE CARTRIDGE BLOCKS6000 Series


MY

N

CS W

E

H

3 JACKSCREW HOLESPROVIDED

F

A

R



ShaftSize

Inches

CompleteBlockNo.

SizeCode C E G J K L

S+.000-.002

WComplete

BlockNet Wt

Lb

1-15/16 ZCS-6115 6 3-41/64 1-1/8 2.453 0.460 0.535 0.760 3.833 2-55/64 5.3

2 -3/16 ZCS-6203 7 3-49/64 1-5/32 2.578 0.460 0.535 0.760 4.227 3-15/64 8.1

2 -3/8 ZCS-62068 4-5/32 1-27/64 2.640 0.460 0.535 0.760 4.621 3-19/32

9.1

2 -7/16 ZCS-6207 8.7

2-11/16 ZCS-6211

9 4-17/32 1-25/64 3.140 0.460 0.535 0.760 5.407 4-3/32

15.1

2 -3/4 ZCS-6212 14.1

2-15/16 ZCS-6215 12.1

3-3/16 ZCS-630310 5-9/64 1-19/32 3.453 0.600 0.675 0.930 6.194 4-61/64

19.8

3-7/16 ZCS-6307 17.9

3-11/16 ZCS-631111 5-31/32 1-47/64 4.000 0.600 0.675 0.930 7.375 5-43/64

33.6

3-15/16 ZCS-6315 32.6

Bore Size = Nominal Shaft Size +.001 - .000Seals – To specify K or M seal, replace “Z” in model number with “K” or “M” Auxiliary End Caps – Not available on ZCS SeriesExpansion slot allows 3/8” float

s A locking pin and grease fitting is supplied with each unit as a means to lubricate and secure the bearing. Recommended engagement of the locking pin into the cartridge is .125 +/-.015


G E

W

C

S

30°

¾HEX

.620 .530

.145

5/8 – 18UNF

LKJ

80°

LOCKING PIN

ZCS CARTRIDGE BLOCKS6000 Series




ShaftSize

Inches

CompleteBlockNo.

SizeCode C E G G1 Ss

X Slot Dimensions

W YComplete

BlockNet Wt

LbLength

Width+.041-.000

Depth

1-15/16 ZMC-6115 6 3-41/64 1-1/8 2-7/16 . . . 4.125 29/32 0.531 3/16 2-55/64 . . . 6.5

2-3/16 ZMC-6203 7 3-49/64 1-5/32 2-9/16 . . . 4.531 29/32 0.531 3/16 3-15/64 . . . 9.5

2-3/8 ZMC-62068 4-5/32 1-27/64 2-5/8 . . . 5.000 29/32 0.531 3/16 3-19/32 . . .

10.9

2-7/16 ZMC-6207 10.6

2-11/16 ZMC-6211

9 4-17/32 1-25/64 3-1/8 . . . 5.875 1-1/32 0.594 1/4 4-3/32 . . .

18.7

2-3/4 ZMC-6212 17.7

2-15/16 ZMC-6215 15.7

3-3/16 ZMC-630310 5-9/64 1-19/32 3-7/16 . . . 6.750 1-1/16 0.594 9/32 4-61/64 . . .

24.7

3-7/16 ZMC-6307 22.8

3-11/16 ZMC-631111 5-31/32 1-47/64 4-1/8 . . . 8.125 1-9/32 0.781 5/16 5-43/64 . . .

44.0

3-15/16 ZMC-6315 41.5

4-3/16 ZMC-6403Y12 6-1/4 1-7/8 4-1/4 . . . 8.750 1-1/2 0.781 5/16 6-1/16 . . .

50.0

4-7/16 ZMC-6407Y 47.0

4-15/16 ZMC-6415 13 7-15/16 2-1/4 5-9/16 6 10.437 1-1/2 0.781 5/16 6-61/64 7-25/32 95.0

Bore Size = Nominal Shaft Size +.001 -.000Seals - to Specify K or M seal, replace “Z” in model number with “K or “M” – “K” only available Size Code 6-11Auxiliary End Caps - Not available on ZMC Series

s Outside Diameter Tolerance: Size Code 6-11 = +.000/-.002, Size Code 12-13 = +.000/-.003


ZMC CARTRIDGE BLOCKS6000 Series


C

W

G

X

S

120°

X

SIZE CODE 13

X1G

G

Y

C

W

E

E

SIZE CODE 6-12


Q Specifications . . . Radial Load Ratings are Shown on Page 24

ShaftSize

Inches

CompleteBlock

No.

Allow.WorkingLoad Q

Lb

SizeCode

Dimensions in Inches CompleteBlockNetlb

A C D E F H JK

+0.005-0.015

K1 L O P T W

1-15/16 ZT6-6115 12,300 6 3-15/16 3-41/64 3-5/16 1-1/8 6-3/16 1-15/16 1-1/8 4 4-1/2 2-5/16 3/4 4-1/2 11/16 2-55/64 10.8

2-3/16 ZT7-6203 13,500 7 4-5/8 3-49/64 3-7/8 1-5/32 7-1/8 2-1/4 1-3/8 4-1/2 5-1/4 2-5/8 1-1/4 5 13/16 3-15/64 15.2

2-3/8 ZT8-620620,900 8 5-1/16 4-5/32 4-1/4 1-27/64 7-13/16 2-1/4 1-3/8 5-1/8 5-7/8 2-29/32 1-1/4 5-1/2 1-1/16 3-19/32

19.9

2-7/16 ZT8-6207 19.4

2-11/16 ZT9-6211

26,800 9 5-15/16 4-17/32 4-7/8 1-25/64 9-1/8 2-3/4 1-5/8 5-15/16 6-11/16 3-3/8 1-1/2 6-7/16 1-13/16 4-3/32

31.5

2-3/4 ZT9-6212 30.1

2-15/16 ZT9-6215 28.8

3-3/16 ZT10-630327,300 10 6-5/16 5-9/64 5-3/8 1-19/32 10 2-7/8 1-7/8 6-13/16 7-13/16 3-31/32 1-5/8 7-3/8 1-13/16 4-61/64

44.0

3-7/16 ZT10-6307 42.0

3-11/16 ZT11-631145,400 11 7-11/16 5-31/32 5-3/8 1-47/64 12-3/8 3-3/8 2-1/8 8-5/8 9-7/16 4-9/16 2-1/8 8-7/8 2-1/16 5-43/64

75.0

3-15/16 ZT11-6315 72.0

4-3/16 ZT12-6403Y53,700 12 8-11/16 6-1/4 6-3/8 1-7/8 13-7/16 3-3/8 2-1/8 9-1/2 10-3/8 5-1/32 2-1/8 9-13/16 2-1/16 6-1/16

94.0

4-7/16 ZT12-6407Y 91.0

4-15/16 ZT13-6415 68,000 13 9 -7/16 7-15/16 6-1/4 2-1/4 14-7/8 3-3/4 2-3/8 10-1/4 11-1/4 5-3/4 2-1/2 10-7/8 2-1/16 6-61/64 130.0

Bore Size = Nominal Shaft Size +.001 - .000Seals – To specify K or M seal, replace “Z” in model number with “K” or “M” – “K” only available Size Code 6-11

Q Allowable Working Load 2/3 yield strength


ZT TAKE-UP BLOCKS6000 Series


LC

E

T

W D H J

A

K K1

O

F

P


ZHT TAKE-UP ASSEMBLIES

Specifications . . . Radial Load Ratings of Bearings — See Page 24

ShaftSize

Inches

6000 SeriesFrame

Only

Allow-able

WorkingLoad†

Lb

SizeCode


Com-plete

Take-upNet Wt

Lb

CompleteTake-up

Assembly

Take-upBlockOnly

A B C F G H I KT

TravelO X

YThread

No. Size

1-15/16 ZHT6-6115

-12

ZT6-6115 ZHT6

-12

12,300 6 3-15/16

27-1/2

3-41/64

29-1/2

4 7/8 . . . 8-7/16

15

6-9/16

19-1/2

18NC 2 5/8

59

-18 -18 33-1/2 35-1/2 21 25-1/2 69

-24 -24 39-1/2 41-1/2 27 31-1/2 77

-30 -30 45-1/2 47-1/2 33 37-1/2 86

-36 -36 51-1/2 53-1/2 39 43-1/2 95

2-3/16 ZHT7-6203

-12

ZT7-6303 ZHT7

-12

13,000 7 4-7/16

27-1/2

3-49/64

29-1/2

4 1-3/16 . . . 9 15 6-13/16 20 1-1/47NC 2 5/8

70

-18 -18 33-1/2 35-1/2 81

-24 -24 39-1/2 41-1/2 90

-30 -30 45-1/2 47-1/2 98

-36 -36 51-1/2 53-1/2 108

-12

ZHT8

-12

16,300 8 4-3/8

28 -/2

4-5/32

30-1/2

4 3/4 . . . 9-3/16

15

7-1/2 20 1-1/47NC 2 3/4

77

2-3/4 ZHT8-6206 -18 ZT8-6206 -18 34-1/2 36-1/2 21 86

2-7/16 ZHT8-6207 -24 ZT8-6207 -24 40-1/2 42-1/2 27 96

-30 -30 46-1/2 48-1/2 33 107

-36 -36 52-1/2 54-1/2 39 119

-12

ZHT9

-12

26,800 9 5-1/8

30-1/2

4-17/32

32-1/2

5 7/8 2 10-3/4

16

8-1/8

21-3/4

1-1/26NC 4 5/8

128

2-11/16 ZHT9-6211 -18 ZT9-6111 -18 36-1/2 38-1/2 22 27-3/4 142

2-3/4 ZHT9-6212 -24 ZT9-6112 -24 42-1/2 44-1/2 28 33-3/4 159

2-15/16 ZHT9-6215 -30 ZT9-6215 -30 48-1/2 50-1/2 34 39-3/4 174

-36 -36 54-1/2 56-1/2 40 45-3/4 191

-12

ZHT10

-12

27,300 10 5-5/8

32

5-9/64

34-1/4

5 7/8 2 11-13/16

16-1/4

8-3/4

22

1-3/46NC 4 3/4

152

3-3/16 ZHT10-6303 -18 ZT10-6303 -18 38 40-1/4 22-1/4 28 177

3-7/16 ZHT10-6307 -24 ZT10-6307 -24 44 46-1/4 28-1/4 34 186

-30 -30 50 52-1/4 34-1/4 40 205

-36 -36 56 58-1/4 40-1/4 46 224

-12

ZHT11

-12

38,400 11 7

36

5-31/32

38-1/2

6 7/8 2-1/2 14-3/16

17-1/2

10-5/8

26

24-1/2NC 4 3/4

241

3-11/16 ZHT11-6311 -18 ZT11-6311 -18 42 44-1/2 23-1/2 32 270

3-15/16 ZHT11-6315 -24 ZT11-6315 -24 48 50-1/2 29-1/2 38 290

-30 -30 54 56-1/2 35-1/2 44 311

-36 -36 60 62-1/2 41-1/2 50 337

-12

ZHT12

-12

53,300 12 7-1/2

40-3/4

6-1/4

45-3/4

8-7/8 1 5 15-1/2

19

12-1/4 26 24-1/2NC 4 1-1/8

331

-18 -18 46-3/4 51-3/4 25 362

4-3/16 ZHT12-6403Y -24 ZT12-6403Y -24 52-3/4 57-3/4 31 391

4-7/16 ZHT12-6407Y -30 ZT12-6407Y -30 58-3/4 63-3/4 37 410

-36 -36 64 3/4 69 3/4 43 433

-42 -42 70 3/4 75 3/4 49 461

4 15/16 ZHT13-6415

-12

ZT13-6415 ZHT13

-12

68,000 13 8-1/8

44-1/2

7-15/16

49-1/2

9 -7/8 1 5-1/2 16-3/4

20-1/4

13-1/2

29

2-1/44-1/2NC 4 1-1/8

440

-18 -18 50 1/2 55 1/2 26 1/4 35 460

-24 -24 56 1/2 61 1/2 32 1/4 41 496

-30 -30 62 1/2 67 1/2 38 1/4 47 527

-36 -36 68 1/2 73 1/2 44 1/4 53 555

-42 -42 74 1/2 79 1/2 50 1/4 59 587

CENTER PULL TYPE6000 Series


K

IG

O T - TRAVEL

A H

BF

X

T

Y

C

Bore Size=Nominal Shaft Size +.001 - .000Seals - To Specify K or M seal, replace “Z” in model number with “K” or “M”-"K" only available size code 6-11

† Allowable Working Load 2/3 yield strength

NOTE: Dimensions subject to change. Certified dimensions of ordered material furnished on request.


ZNT TAKE-UP ASSEMBLIESPROTECTED SCREW TYPE

6000 SeriesSHURLOK Adapter Mount

Specifications . . . Radial Load Ratings of Bearings are Shown on Page 24 — Frame Capacity listed in Table Below

ShaftSize

Inches

CompleteAssembly No.

Take-upBlocks

Only

BlockWt

FrameAssemblies

Only

Allow-able

WorkingLoadH

Lb

SizeCode


Com-pleteTake-

upNetWtLb

A B C F G1 H I KT

TravelO Q X Y Z No. Size

1-15/16 ZNT6-6115

-12

ZN6-6115 13.6 ZNT6

-12

3,000 6 3-5/16

26-1/2

3-41/64

28-1/2

3-1/2 3-13/16 1-3/4 . . . 8-1/4

12

7-1/4 1-7/32

25-3/8

3/410NC 3 2 5/8

47

-18 -18 32-1/2 34-1/2 18 31-3/8 52

-24 -24 38-1/2 40-1/2 24 37-3/8 58

-30 -30 44-1/2 46-1/2 30 43-3/8 65

-36 -36 50-1/2 52-1/2 36 49-3/8 72

2-3/16 ZNT7-6203

-12

ZN7-6203 18.4 ZNT7

-12

3,600 7 4-3/16

27-1/2

3-49/64

29-1/2

3-1/2 3-13/16 1-3/4 . . . 8-11/16

12

7-3/4 1-9/32

26-3/8

3/410NC 3 2 5/8

51

-18 -18 33-1/2 35-1/2 18 32-3/8 56

-24 -24 39-1/2 41-1/2 24 38-3/8 68

-30 -30 45-1/2 47-1/2 30 44-3/8 75

-36 -36 51-1/2 53-1/2 36 50-3/8 80

-12

ZNT8

-12

4,400 8 4-3/8

28-1/2

4-5/32

30-1/2

3-1/2 3-15/16 1-3/4 . . . 9-1/8

12

8-1/4 1-5/16

27 3/4

7/89NC

3 2 3/4

61

2-3/8 ZNT8-6206 -18 ZN8-6206 22.6 -18 34-1/2 36-1/2 18 33 3/4 65

2-7/16 ZNT8-6207 -24 ZN8-6207 22.4 -24 40-1/2 42-1/2 24 39 3/4 76

-30 -30 46-1/2 48-1/2 30 45 3/4 81

-36 -36 52-1/2 54-1/2 36 51 3/4 87

-12

ZNT9

-12

6,800 9 5-1/8

30-1/2

4-17/32

32-1/2

4-1/2 51/16 2 2 10-5/8

12

9-1/4 1-9/16

30

18NC 4 4 3/4

87

2-11/16 ZNT9-6211 -18 ZN9-6211 33.7 -18 36-1/2 38-1/2 18 36 95

2-3/4 ZNT9-6212 -24 ZN9-6212 32.7 -24 42-1/2 44-1/2 24 42 115

2-15/16 ZNT9-6215 -30 ZN9-6215 32.2 -30 48-1/2 50-1/2 30 48 122

-36 -36 54-1/2 56-1/2 36 54 130

-12

ZNT10

-12

8,400 10 5-5/8

32

5-9/64

34-1/4

4-1/2 5-3/16 2 2 11-3/4

12

10 1-23/32

32

1-1/87NC 4 4 3/4

120

3-3/16 ZNT10-6303 -18 ZN10-6303 48.0 -18 38 40-1/4 18 38 129

3-7/16 ZNT10-6307 -24 ZN10-6307 46.2 -24 44 46-1/4 24 44 147

-30 -30 50 52-1/4 30 50 156

-36 -36 56 58-1/4 36 56 168

-12

ZNT11

-12

15,600 117

36

5-31/32

36-1/2

5-1/2 6-3/8 2-1/4 2-1/2 14-1/2

12

12 2-1/16

36-5/16

1-1/47NC 5 4 3/4

211

3-11/16 ZNT11-6311 -18 ZN11-6311 87.5 -18 42 44-1/2 18 42-5/16 219

3-15/16 ZNT11-6315 -24 ZN11-6315 86.5 -24 48 50-1/2 24 48-5/16 251

-30 -30 54 56-1/2 30 54-5/16 270

-36 -36 60 62-1/2 36 605/16 281

Bore Size = Nominal Shaft Size +.001 - .000Seals – To specify K or M seal, replace “Z” in model number with “K” or “M

H Allowable Working Load is 2/3 yield strength Note: Dimensions subject to change. Certified dimensions of ordered material furnished on request.

Q

G

G1

A

K

H

B

F

Y X

O OT - TRAVELC

Z

I


BEARING REPLACEMENT KIT6000 Series

Kit contains: One inner raceand roller assembly, twoouter races, one adaptersleeve assembly.

SIZE CODE Shaft Size — InchesBearing Replacement Kit

Number Wt Lb

6 1-15/16 6115U 3.1

7 2-3/16 6203U 4.0

8 2-3/8 6206U 5.02-7/16 6207U 5.0

9 2-11/16 6211U 8.7

2-3/4 6212U 8.52-15/16 6215U 7.5

10 3-3/16 6303U 12.9 3-7/16 6307U 11.4

11 3-11/16 6311U 23.03-15/16 6315U 20.7

12 4-3/16 6403YU 29.64-7/16 6407YU 26.75

13 4-15/16 6415U 48.0


ENGINEERING

SizeCode

Load Rating Maxrpm

LifeHours

RADIAL LOAD RATING TABLE (LB)

SPEED (RPM)

C Co 50 100 200 350 500 750 1000 1250 1500 1750 2000 2500 3000 3500 4000 4500 5000

2 9900 9100 65005000 Q Q Q 2451 2202 1950 1789 1673 1584 1512 1453 1359 1286 1228 1180 1139 1104

15000 Q Q 2085 1763 1584 1402 1286 1203 1139 1088 1045 977 925 883 849 819 79480000 1912 1553 1262 1067 968 849 779 728 689 658 632 591 560 535 514 496 480

3 14300 14200 57505000 Q Q Q 3540 3181 2816 2583 2416 2288 2184 2098 1963 1858 1774 1704 1645

15000 Q Q 3011 2546 2288 2026 1858 1738 1645 1571 1509 1412 1336 1276 1226 1183 114680000 2762 2244 1822 1541 1384 1226 1125 1052 996 951 913 854 809 772 742 716 694

4 15900 16000 52505000 Q Q Q 3936 3536 3131 2873 2687 2544 2429 2333 2182 2066 1973 1895

15000 Q Q 3348 2831 2544 2252 2066 1932 1829 1747 1978 1569 1486 1419 1363 131680000 3071 2495 2026 1713 1539 1363 1250 1169 1107 1057 1016 950 899 859 825 796 771

5 20200 21300 44505000 Q Q Q 5000 4493 3978 3649 3413 3231 3085 2964 2772 2625 2506

15000 Q Q 4254 3596 3231 2861 2625 2455 2324 2219 2132 1994 1888 1802 173280000 3902 3169 2574 2176 1956 1732 1588 1486 1407 1343 1290 1207 1142 1091 1048 1012

6 23400 26200 40505000 Q Q Q 5792 5205 4609 4227 3954 3743 3574 3434 3211 3040

15000 Q Q 4928 4166 3743 3315 3040 2844 2692 2571 2470 2310 2187 208880000 4520 3671 2982 2521 2265 2006 1840 1721 1629 1556 1495 1398 1323 1264 1214

7 27200 31800 36505000 Q Q Q 6733 6050 5357 4914 4596 4351 4155 3991 3733

15000 Q Q 5728 4843 4351 3853 3534 3305 3129 2988 2871 2685 254280000 5254 4268 3466 2931 2633 2332 2139 2000 1894 1808 1737 1625 1538 1469

8 38200 46800 33005000 Q Q Q 9456 8496 7523 6901 6454 6111 5835 5606

15000 Q Q 8244 6801 6111 5411 4964 4642 4395 4196 4032 377180000 7379 5997 4868 4116 3698 3275 3004 2809 2660 2540 2440 2282 2161

9 46800 55700 28005000 Q Q Q 11585 10409 9217 8455 7907 7487 7148

15000 Q Q 9855 8332 7487 6629 6081 5687 5385 5141 493980000 9040 7343 5964 5043 4531 4012 3680 3442 3259 3111 2989 2796

10 82000 91900 24005000 Q Q Q 20298 18238 16150 14814 13855 13117 12525

15000 Q Q 17268 14599 13117 11615 10655 9965 9434 9008 865480000 15840 12866 10450 8835 7939 7029 6448 6031 5710 5452 5238 4898

11 118000 127500 20505000 Q Q Q 29210 26245 23240 21318 19938 18876

15000 Q Q 24849 21008 18876 16714 15332 14340 13576 1296380000 22794 18514 15038 12714 11424 10116 9279 8678 8216 7845 7537

12 140400 144800 18505000 Q Q Q 34754 31228 27651 25365 23722

15000 Q Q 29566 24996 22460 19887 18243 17062 1615480000 27121 22029 17893 15128 13593 12036 11041 10326 9776 9334

13 159900 221700 16005000 Q Q Q 39581 35565 31492 28888

15000 Q Q 33672 28468 25579 22649 20777 1943180000 30888 25089 20378 17229 15481 13707 12574 11760 11134

14 190000 282400 10005000 Q Q Q 47032 42260

15000 Q Q 40010 33827 30394 2691380000 36702 29811 24214 20472 18395 16288 14941

15 212700 310600 9005000 Q Q Q 52651 47309

15000 Q Q 44790 37868 34025 3012880000 41087 33373 27107 22918 20592 18234 16726

16 235300 361500 8005000 Q Q Q 58246

15000 Q Q 49550 41892 3764180000 45453 36919 29988 25353 22780 20171

Q Load exceeds 25% of C rating, consult Rexnord.

Shaded ratings may require additional axial clearance and/or high speed temperature lubricant due to higher operating temperatures.

THEORETICAL BEARING L10 LIFE CALCULATION

While bearings are usually selected on the basis of capacity,there are occasions when they are selected based on calculated L10 life.The L10 life is defined as the number of revolutions (orhours) that90% of a group of bearings will meet or exceedbefore evidence of raceway spalling fatigue occurs. The L10 lifecan be calculated using the following empirical formula:

L = 1 X 10

60 X RPM

CP

= life in hour10

6

e

103

s

Where C = C Rating Pe = Equivalent Radial Load or Req’d Radial Capacity

The basic dynamic load ratings, C, in this catalog have beenincreased significantly compared to previous values. Improvedsurface characteristics have been produced primarily byimproving manufacturing and measuring techniques for the racesurfaces. Along with the capability to rotate under higher loads,the static load ratings, Co, have also been increased.With the larger load ratings it may be possible to use smallerbearings (size code) for a given application. Caution is advisedin such cases to consider the strength of the shaft and housing – especially when the applied load is not aimed directly into themachined mounting surface.

The choice of the seal for a mounted bearing is often the key tosuccessful bearing operation and long service life. This SEALSELECTION GUIDE incorporates years of Rexnord experienceagainst the wide variety of conditions encountered on actualapplications. Following the simple selection procedure outlinedcan translate the benefits of that broad experience to individualapplications through the choice of the most effective seal.

How to Use the Selection Guide

a. The appropriate seal for a given application may be selected bycomparing the job application conditions against those listed inthe SEAL RATING GUIDE on this page.

b. When more than one application condition is present, the mostappropriate seal may be selected based on prime sealing for the most detrimental condition, and secondary consideration givento the other application conditions.

c. The details of design, principle of operation, benefits andlimitations, as well as shaft size range are described as a further aid to final selection.

d. Addition of auxiliary end caps will enhance the primary sealperformance shown in the chart.

Considerations in Addition to Seal Selection

Under certain adverse conditions, other changes should beconsidered to achieve maximum bearing life:

a. High temperature lubricants where housing or ambienttemperatures exceed +200F.

b. Special greases for additional bearing protection whereexcessive water, solvents or chemicals are present.

c. EP (extreme pressure) greases where high load, high shockload, or continuous vibration is present.

d. Changes in amount of lubricant and cycles for relubricationperiods.

e. Readjustment of internal operating clearance of bearing whereextreme high or low temperature conditions exist.


SEAL SELECTION GUIDE6000 Series

Seal Rating Guide

Seal Rating

Clearance LightContact

HeavyContact Viton

Z K M MSHAFT POSTION

Horizontal Shaft 4 4 4 4Vertical Shaft 1 3 4 4

OPERATING TEMPERATUREBelow -40°F 4 1 1 2-40° to 0°F 4 3 3 40° to 250°F 4 4 4 4+250° to +300°F 4 2 2 4Over 300°F 4 0 0 2

SPEEDEqual to/Less than limit below 4 4 4 4More than limit below 4 2 1 1

VIBRATION/SHOCKOccasional - Mild 3 4 4 4Occasional - Severe 2 4 4 4Continuous - Mild 1 4 3 4Continuous - Severe 0 4 3 4

ABRASIVE MATERIALCoarse - Over #10 Mesh 4 4 3 3Small - #10 to #50 Mesh 3 4 4 4Fine - #50 to #200 Mesh 1 3 4 4Very fine - Under #200 Mesh 3 3 4 4“Caking or buildup” (cement, etc.) 2 4 3 3

MOISTURESplash 2 3 4 4Rain 2 3 4 4Saturated Atmosphere 1 3 4 4Flooding 0 1 3 3Pressure Wash 0 1 4 4

FIBROUS MATERIALShort Fibers (lint, etc.) 1 3 4 4Long Fibers (grass, etc.) 1 3 2 2

CHEMICALAcid Fumes and Liquids 1 1 1 4Alkaline Fumes and Liquids 1 1 1 4Application experiences indicate that special consideration should be given to theaddition of Auxiliary End Cap Seals in the shaded areas in the chart.

Rating Code4 - Excellent - Best seal for conditions listed.3 - Good - Sealability is above average.2 - Fair - Seal performs under intermittent conditions.1 - Limited - Actual conditions must be known to evaluate sealability. Check “General

Characteristic Guide” Page 59 for construction as well as benefits and limitations for further evaluation.

0 - Not acceptable - Will not effectively perform seal functions. Contact Rexnord for special assistance in the realm of materials and designs.

Seal Speed Limit Table H

Size Code 6 7 8 9 10 11 12 13

(RPM)

Z 4050 3650 3300 2800 2400 2050 1850 1600

K 2800 2500 2300 1900 1700 1400

M 2500 2200 2000 1700 1400 1200 1100 1000

Size Code 6 7 8 9 10 11 12 13

Refer to Seal Rating Guide shown above for speeds in excess of those listed in this table.H Actual bearing speed limits are largely based upon the applied load and can be found on the Load Rating Table on Page 24.


ADAPTER AUXILIARY END CAP DIMENSIONS6000 Series

"B" Prefix

Example: MA6215B( One Closed Caps)(One Open Cap)

Example: MA6215A

"A" Prefix V-Ring Seal Detail

GasketThickness

"A" Prefix

Example: AMA6215(Two Open Caps) (1 Open 1 Closed Caps)

Example: BMA6215

"B" Prefix

EF

C

D

C

D

B

G

B

D

AA

D

6000 Series Adapter Mount Auxiliary End Cap DimensionsCast Iron Auxiliary End Caps

BearingNumber

SizeCode

Fixed Bearings Only Floating (Expansion) ZAFS Bearings Only Floating (Expansion) ZPS, ZFS Bearings Only V-Ring Seal Gasket

A B C D A B C D A B C D E F G

6115 6 5-7/8 2-9/16 2-15/16 1-23/32 6-1/4 2-11/16 3-1/8 1-29/32 6-1/2 2-13/16 3-1/4 1-29/32

3/8 3/16

3/16

6203 7 6-1/16 2-5/8 3-1/32 1-3/4 6-7/16 2-25/32 3-7/32 1-15/16 6-5/8 2-7/8 3-5/16 1-15/16

62068 6-11/16 3-1/32 3-11/32 2-1/32 7-3/16 3-5/32 3-19/32 2-9/32 7-7/16 3-9/32 3-23/32 2-9/32

6207

6211

9 7-1/4 3-1/16 3-5/8 2-1/16 7-3/4 3-7/16 3-7/8 2-5/16 8 3-9/16 4 2-5/16

7/16 1/4

6212

6215

630310 7-15/16 3-7/32 3-31/32 2-1/4 8-7/16 3-25/32 4-7/32 2-1/2 8-11/16 3-29/32 4-11/32 2-1/2

6307

631111 9 3-15/16 4-1/2 2-7/16 9-1/2 4-3/16 4-3/4 2-11/16 9-3/4 4-5/16 4-7/8 2-11/16

6315

6403Y12 9-7/16 4-5/32 4-23/32 2-19/32 10-3/16 4-21/32 5-3/32 2-31/32 10-7/16 4-31/32 5-7/32 2-31/32

9/16 5/166407Y

6415 13 11-5/8 5-1/4 5-13/16 3-1/32 12-3/8 5-5/8 6-3/16 3-13/32 12-13/16 5-27/32 6-13/32 3-13/32

***AUXILIARY END CAP KITS 6000 SERIES ADAPTER AS96215

A S 9 6 215

CAPSTYLE

A - Open Cap

B -Closed Cap

HOUSINGTYPE

S - Floating Type

* - Leave Blank for Fixed Type

SIZECODE 6 -13 Bearing Size Code From Above

SERIES6 - For Type “A” Open Caps

6000 For Type “B” Closed Caps

SHAFTDIAMETER

215 - 2-15/16” Last 2 Digits In 16th Of An Inch

* - Not Required For Closed Cap Styles

*** IN ADDITION, PRE-DRILLED AND TAP HOUSINGS ARE REQUIRED.

Rexnord is pleased to offer a quick installation tool for theSHâRLOK bearing. This tool is designed as a supplement to the spanner wrench or drift pin method. The installation tool can beattached to a half inch drive ratchet, torque wrench, or breakerbar which can be used as a lever arm. Simply fit the installationtool over the locknut by placing the tool’s teeth into the locknutslots. The tool’s unique shape allows it to be used from the sideor the top of the bearing (see Figs. 1 and 2). To order, refer tothe table below for the installation tool that fits your shaft size.


REXNORD® SHURLOK INSTALLATION TOOLS

Part Number Size Code Shaft Sizes

105-90420-11 6 1-15/16”

105-90420-21 7 2-3/16”

105-90420-31 8 2-3/8”, 2-7/16”

105-90420-41 9 2-11/16”, 2-3/4”, 2-15/16”

105-90420-51 10 3-3/16’, 3-7/16”

105-90420-61 11 3-11/16”, 3-15/16”

105-90420-71 12 4-3/16”, 4-7/16”

105-90420-81 13 4-15/16”

Figure 2

Figure 1

For more than 100 years, the dedicated people of Rexnord

have delivered excellence in quality and service to our

customers around the globe. Rexnord is a trusted name when

it comes to providing skillfully engineered products that

improve productivity and efficiency for industrial applications

worldwide. We are committed to exceeding customer

expectations in every area of our business: product design,

application engineering, operations, and customer service.

Because of our customer focus, we are able to thoroughly

understand the needs of your business and have the resources

available to work closely with you to reduce maintenance

costs, eliminate redundant inventories and prevent equipment

down time.

Rexnord represents the most comprehensive portfolio of power

transmission and conveying components in the world with the

brands you know and trust.

World Class Customer Service

AAUUSSTTRRAALLIIAARexnord Australia Pty. Ltd.

Picton, New South Wales

Phone: 61-2-4677-3811

Fax: 61-2-4677-3812

BBRRAAZZIILLRexnord Correntes Ltda.

Sao Leopoldo - RS

Phone: 55-51-579-8022

Fax: 55-51-579-8029

CCAANNAADDAARexnord Canada Ltd.

Scarborough, Ontario

Phone: 1-416-297-6868

Fax: 1-416-297-6873

CCHHIINNAARexnord China

Shanghai, China

Phone: 86-21-62701942

Fax: 86-21-62701943

EEUURROOPPEERexnord NV/SA

Mechelen, Belgium

Phone: 32-15-.443811

Fax: 32-15-443860

Rexnord Kette GmbH

Betzdorf, Germany

Phone: 49-2741-2840

Fax: 49-2741-284-385

LLAATTIINN AAMMEERRIICCAARexnord International, Inc.

Milwaukee, Wisconsin

Phone: 1-414-643-2366

Fax: 1-414-643-3222

E-mail: [email protected]

MMEEXXIICCOOMecanica Falk S.A. de C.V.

Mexico, D.F. 02300

Phone: 52-55-9140-3500

Fax: 52-55-9140-3550

SSIINNGGAAPPOORREERexnord International, Inc.

Singapore City, Singapore

Phone: 65-6338-5622

Fax: 65-6338-5422

UUNNIITTEEDD SSTTAATTEESSCustomer Service

Phone: 1-866-REXNORD

(1-866-739-6673)

Fax: 1-614-675-1898

E-mail: rexnordcs(state)@rexnord.com

Example: [email protected]

AALLLL CCOOUUNNTTRRIIEESS NNOOTT LLIISSTTEEDDRexnord International

Milwaukee, Wisconsin

Phone: 1-414-643-2366

Fax: 1-414-643-3222

E-mail: [email protected]

WORLDWIDE CUSTOMER SERVICE

1070 09/2007 Delzer Litho Printed in USARexnord Industries, LLC, 7601 Rockville Road, Indianapolis, IN 46214-3102 USA

Phone: 317-273-5500 Fax: 317-273-5620

© 2007 Rexnord Industries LLC

Rexnord is a registered trademark of Rexnord Industries, LLC. Shurlok and Spyglass are trademarks of

Rexnord. Imperial is a trademark of Baldor-Dodge. Dodge and SKF are trademarks of their respective

companies. All rights reserved.

Rexnord 6000 Series SHURLOK With New Spyglass...

Documents

Transcript of Rexnord 6000 Series SHURLOK With New Spyglass...