Hoap&LineStop - Enerteq Solutions 860 25.2 639 50.2 1260 2828.L1C.150 2828.L1C.300 2828.L1C.600 ......
Transcript of Hoap&LineStop - Enerteq Solutions 860 25.2 639 50.2 1260 2828.L1C.150 2828.L1C.300 2828.L1C.600 ......
Propipe, a specialist manufacturer of specialized pipes and fi3ngs to serve major industry players across the energy and environmental value
chain, has a “Hot-‐Tap & Line Stop Division” to provide no-‐shutdown
piping soluDons to customers. With our decades as a world class provider of piping soluDons, this expansion will support products diversifies
Propipe’s market base and customers’ requirement. We strongly believe
that our developing on the unique Hot Tap and Line Stop fi3ngs,
equipment and services will provide the best and most cost effecDve soluDon to the specific project need.
! propipe HQ Hermanos Gascon, 14 28050 Madrid-Spain Ph +34 639 121 305 Fx +34 911 518 465 propipe engineering (Madrid) propipe fze (Dubai) propipe USA (Houston)
[email protected] www.propipe.eu
Ho*ap & Line Stop
General Informa6on Head Quarter and registraDon address:
Hermanos Gascon 14
28050 Madrid Spain Ph +34 913 588 589 Fx +34 911 518 465
[email protected] www.propipe.es
Year of Establishment: 2002
Place of registraDon: Spain – Madrid RegistraDon info: Registro MercanDl de Madrid tomo 17927
Folio 34 sección 8 Hoja M-‐309532 Inscripción 1ª
C.I.F/VAT.: B-‐83382523. Capital 3,100 Euros
Companies of the group: Propipe Engineering (Spain)
Propipe FZE (U.A.E. Dubai)
Propipe USA (Houston) Turn Over: 4.100.154 EUROS
1.13.26 Accesorios de acero de alto límite elástico con soldadura para tuberías1.13.40 Accesorios de toma en carga, obturación y purga (way-tees y otros) para gas1.13.59 Rascadores y trampas de rascadores3.03.99 Otros servicios relativos a tuberías
Certificado válido hasta el día: 12/06/2013Este certificado indica que el Proveedor en cuestión está registrado en RePro en los productos y/o servicios señalados para las empresas participantes en el Registro de Proveedores. RePro podrá ser utilizado por las Empresas Participantes, bien como base para realizar la selección de proveedores que serán invitados a presentar ofertas, o bien como requisito previo para poder acceder a sus propios sistemas de clasificación
Víctor Arroyo
Director de Operaciones Achilles South Europe, S.L.U.
Pablo García Berenguer
Presidente del Comité En representación de las Empresas Participantes.
Nº RePro: 311074PROPIPE, S.L.
Ha obtenido el registro en RePro para los Productos/Servicios siguientes:
Pag. 2/2 Informe impreso el jueves, 17 de enero de 2013
DESIGN DATA • Design Code: ASME B31.8/4 • Design Pressure: the maximum for each raDng • Design Factor: 0.72 • Design Temperature: from -‐20ºC to 80ºC • Corrosion Allowance: 0 mm NDT TEST (as per ASME V) • 100% RX on but welds • 100% US on the other MATERIALS • A860 All Grades -‐ P355 NL1, P460 NL1 as per EN 10.028-‐3 • Flanges: ASTM A105 Ø ≤ 24” ASME B16.5 Ø > 24” MSS-‐SP-‐44/ASME B16.47. • Bolts & Nuts: ASTM A193 B7/194 2H • Pipe: API 5L Gr.B, ASTM A106 Gr.B, E355 as per EN 10.297 WELDINGS (as per ASME sec. IX) CERTIFICATION 3.1
Ho*ap & Line Stop FiIngs
Materials: Carbon Steel Stainless Steel
Type: Extruded Fi3ngs Welded Fi3ngs Mechanical Fi3ngs
Size: From 2” to 56”
Full Encirclement LockSure 3 Way Tee Size Weight H L Class 150 Class 300 Class 600 inch kg inch mm inch mm Part Number Part Number Part Number 4 27 8.0 202 12.0 289 0404.L1C.150 0404.L1C.300 0404.L1C.600 6 42 9.3 236 15.2 371 0606.L1C.150 0606.L1C.300 0606.L1C.600 8 63 10.8 275 15.2 371 0808.L1C.150 0808.L1C.300 0808.L1C.600 10 103 12.6 319 21.2 523 1010.L1C.150 1010.L1C.300 1010.L1C.600 12 149 14.1 358 23.6 585 1212.L1C.150 1212.L1C.300 1212.L1C.600 14 203 14.9 379 27.2 677 1414.L1C.150 1414.L1C.300 1414.L1C.600 16 277 16.4 416 31.1 775 1616.L1C.150 1616.L1C.300 1616.L1C.600 18 329 17.9 454 34.2 853 1818.L1C.150 1818.L1C.300 1818.L1C.600 20 481 19.3 490 36.9 923 2020.L1C.150 2020.L1C.300 2020.L1C.600 22 603 20.6 524 41.0 1027 2222.L1C.150 2222.L1C.300 2222.L1C.600 24 731 22.2 565 44.2 1107 2424.L1C.150 2424.L1C.300 2424.L1C.600 26 733 23.7 601 47.9 1202 2626.L1C.150 2626.L1C.300 2626.L1C.600 28 860 25.2 639 50.2 1260 2828.L1C.150 2828.L1C.300 2828.L1C.600 30 948 26.6 675 52.3 1313 3030.L1C.150 3030.L1C.300 3030.L1C.600 32 1087 28.5 723 58.4 1469 3232.L1C.150 3232.L1C.300 3232.L1C.600 34 1301 29.9 760 59.6 1500 3434.L1C.150 3434.L1C.300 3434.L1C.600 36 1578 30.2 766 60.9 1532 3636.L1C.150 3636.L1C.300 3636.L1C.600
FOR LARGEST DIAMETERS, PLEASE ASK TO CANADOIL TECHNICAL DEPARTMENT
Full Encirclement LockSure LineStop Fi3ng
Size Weight H L Class 150 Class 300 Class 600 inch kg inch mm inch mm Part Number Part Number Part Number 4 20 6 159.8 8 203 0404.L2C.150 0404.L2C.300 0404.L2C.600 6 40 8 210.6 12 305 0606.L2C.150 0606.L2C.300 0606.L2C.600 8 68 10 261.4 16 406 0808.L2C.150 0808.L2C.300 0808.L2C.600 10 122 12 312.2 20 508 1010.L2C.150 1010.L2C.300 1010.L2C.600 12 161 13 337.6 23 584 1212.L2C.150 1212.L2C.300 1212.L2C.600 14 230 15 363 26 660 1414.L2C.150 1414.L2C.300 1414.L2C.600 16 308 15 388.4 30 762 1616.L2C.150 1616.L2C.300 1616.L2C.600 18 365 17 426.5 33 838 1818.L2C.150 1818.L2C.300 1818.L2C.600 20 544 19 490 38 965 2020.L2C.150 2020.L2C.300 2020.L2C.600 22 777 20 515.4 42 1067 2222.L2C.150 2222.L2C.300 2222.L2C.600 24 855 21 540.8 45 1143 2424.L2C.150 2424.L2C.300 2424.L2C.600 26 1104 24 609.38 49 1245 2626.L2C.150 2626.L2C.300 2626.L2C.600 28 1233 25 629.7 52 1321 2828.L2C.150 2828.L2C.300 2828.L2C.600 30 1378 26 667.8 55 1397 3030.L2C.150 3030.L2C.300 3030.L2C.600 32 1585 28 718.6 59 1499 3232.L2C.150 3232.L2C.300 3232.L2C.600 34 1857 29 744 62 1575 3434.L2C.150 3434.L2C.300 3434.L2C.600 36 2333 31 794.8 65 1651 3636.L2C.150 3636.L2C.300 3636.L2C.600
FOR LARGEST DIAMETERS, PLEASE ASK TO CANADOIL TECHNICAL DEPARTMENT
Flat botom Threaded Fi3ngs Size Weight H Class 150 Class 300 Class 600 inch kg inch mm Part Number Part Number Part Number 2 1 5.0 127 0202.T2F.150 0202.T2F.300 0202.T2F.600 3 3 7.8 198 0303.T2F.150 0303.T2F.300 0303.T2F.600
Ho*ap & Line Stop Services
Propipe has made it our business to keep piping systems on-‐stream during maintenance, retrofi3ng, alteraDons, emergencies and new construcDon. Our
engineering, manufacturing and field personnel are excepDonally qualified to give
you fast, correct and economically feasible answers to any type of piping problems.
We have own people who operate de most complete line of Hot Tapping, Line
stopping, Valve inserDng and Repair Clamps equipment available. Our capabiliDes
assure our customers that we can meet virtually every possible pressure, temperature and size applicaDon.
Please see here some pictures of the workshop:
Tapping Machine
Hot Tap and Line Stop OperaDons: From 2” to 56” Natural Gas, Crude Oil Carbon Steel 150#, 300#, 600# and 900# Temperature from -‐10ºC to 400ºC
Crude Oil Hotap
Hotap 24” 600#
Hotap Job Hotap Equipment
Fi3ngs a|er end of operaDon
Small Hotap
propipe TM 1000 Series Model 1028 Capacity 4" / stroke 28” Model 1032 Capacity 6” / Stroke 32” propipe TM 3000 Series Model 3048 Capacity 12" / stroke 48" Model 3070 Capacity 20" / stroke 70" propipe TM 5000 Series Model 5078 Capacity 36" / stroke 78" Model 5108 Capacity 36" / stroke 108" Model 5130 Capacity 30" / stroke 130" propipe TM 7000 Series Model 7102 Capacity 72" / stroke 102" Model 7130 Capacity 65" / stroke 130" Model 7150 Capacity 55" / stroke 150" propipe HP Hydraulic Power Pack 30 HP Diesel All capacities are for drilling mild steel pipe and may be reduced when operating on other materials. We can design specifically for your requirements. All Models are designed for operation upto 100 bar (1470psi) and 200 C. They are able to cut up to 3" wall thickness mild steel. They are able to cut stainless steel, API Gr.B and API 5L X80 and concrete. They are capable of installing LOR and flow through plugs and are compatible with TD Williamson equipment. All machines have powered feed for cutting that is proportional to the spindle rpm and rapid travel. All machines spindles are compatible with TD Williamson tooling. Specially designed hydraulic power pack has air cooled diesel engine and additional take off for ancillary equipment.
Ho*ap & Line Stop Equipment
! propipe HQ Hermanos Gascon, 14 28050 Madrid-Spain Ph +34 639 121 305 Fx +34 911 518 465 propipe engineering (Madrid) propipe fze (Dubai) propipe USA (Houston)
[email protected] www.propipe.eu
1000 Series Tapping Machines
DescripDon
SpecificaDons
Tapping machines are used for making connecDons to pipelines, tanks, and plant piping without shutdown and are used to make hot taps in preparaDon for plugging machine applicaDon. Our Models series 1000 can be either air or Manual used.
Features The machine includes a Handle and a air motor is opDonal. Model PPM-‐1000 pneumaDc air wrench, with 0.6 HP at 150 r.p.m. motor requiring 500 lt/min. air, suitable to all our 1000 series drilling machines.
Drilling Capacity Stroke Model 1028 1 1/2” – 4” 28” Model 1030 1 1/2” – 6” 30” Model 1032 1 1/2” – 6” 32” The Models 1000 Drilling Machine are available in two versions: 1028 with 28” of travel and the 1032 Model with 32” of travel. They meets NACE Standard and CE, sulfide stress cracking resistant metallic material for oilfield equipment. The maximum working pressure is 1,480 psi (100 bar) at 100°F (38°C). Its operaDng temperatures are -‐20°F (-‐29°C) to 700°F (371°C) at 700 psi (48 bar) for intermitent service. The maximum conDnuous raDng is 350°F (177°C) at 1,025 psi (70 bar). For special requirements, such as higher pressure or temperature, consult the factory. Other features include: Weight :
Model 1028 32 pounds Model 1030 41 pounds Model 1032 50 pounds
! propipe HQ Hermanos Gascon, 14 28050 Madrid-Spain Ph +34 639 121 305 Fx +34 911 518 465 propipe engineering (Madrid) propipe fze (Dubai) propipe USA (Houston)
[email protected] www.propipe.eu
FLANGED VALVE ADAPTERS CLASS 150# CLASS 300# CLASS 600#
inch mm Stock Number Stock Number Stock Number 2 50 PFVA-02-150 PFVA-02-300 PFVA-02-600 3 80 PFVA-03-150 PFVA-03-300 PFVA-03-600 4 100 PFVA-04-150 PFVA-04-300 PFVA-04-600 6 150 PFVA-06-150 PFVA-06-300 PFVA-06-600
MANUAL SANDWICH VALVE CLASS 150# CLASS 300# CLASS 600#
inch mm Stock Number Stock Number Stock Number 2 50 PSV-02-150 PSV-02-300 PSV-02-600 3 80 PSV-03-150 PSV-03-300 PSV-03-600 4 100 PSV-04-150 PSV-04-300 PSV-04-600 6 150 PSV-06-150 PSV-06-300 PSV-06-600
DRILL DRILL DIAMETER DRILL LENGTH VALVE SIZE
inch mm Inch mm INCH mm Stock Number 1/2" 12.7 6" 150 1 1/4 - 2" 32-50 PD-1000-127-150 1/2" 12.7 22 1/4" 565 1" 25 PD-1000-127-565 3/4" 19.0 6" 150 1 1/4 - 2" 32-50 PD-1000-190-150 3/4" 19.0 22 1/4" 565 1" 25.0 PD-1000-190-565
1 25.0 6" 150 1 1/4 - 2" 32-50 PD-1000-250-150 1 1/4" 32.0 6" 150 1 1/4 - 2" 40-50 PD-1000-320-150
1 7/16" 36.5 7 3/8" 187 1 1/4 - 2" 40-50 PD-1000-365-187
THREADED VALVE ADAPTER MAXIMUM PRESSURE
inch mm Stock Number PSI BAR 1 25 PTVA-1000-25 1480 100
1 1/4" 32 PTVA-1000-32 1480 100 1 1/2" 38 PTVA-1000-38 1480 100
2 50 PTVA-1000-50 1480 100 3 80 PTVA-1000-80 1480 100
Hole Saws / Cutter and Holder Pilots Size On Size Not Size On Size TAP SIZE Cutter Diameter Hole Saw/cutter Holder Pilot Holder Pilot
inch mm Inch mm Stock Number Stock Number Stock Number 1 1/4" 32 1 5/16" 33.3 PHS-1000-32 PHP-SOS-1000-32 PHP-NSOS-1000-32 1 1/2" 38 1 9/16" 39.7 PHS-1000-38 PHP-SOS-1000-38 PHP-NSOS-1000-38
2 50 1 7/8" 47.6 PHS-1000-50 PHP-SOS-1000-50 PHP-NSOS-1000-50 3 80 2 7/8" 73.0 PHS-1000-80 PHP-SOS-1000-80 PHP-NSOS-1000-80 4 100 3 7/8" 98.4 PHS-1000-100 PHP-SOS-1000-100 PHP-NSOS-1000-100
PLUG HOLDER inch Stock Number
2" - 3" PPH-1000-23
PNEUMATIC MOTOR inch Stock Number
2" - 4" PPM-1000
! propipe HQ Hermanos Gascon, 14 28050 Madrid-Spain Ph +34 639 121 305 Fx +34 911 518 465 propipe engineering (Madrid) propipe fze (Dubai) propipe USA (Houston)
[email protected] www.propipe.eu
3000 Series Tapping Machines
DescripDon
SpecificaDons Drilling Capacity Stroke Model 3048 3” – 12” 48” Model 3066 3” – 16” 66” Model 3070 3” – 20” 70” Dimensions Length 2100mm, Width 500mm, Height 536mm Weight 337kg MounDng 4”Class 600 RTJ Type Flange Boring Bar Chrome Plated One piece bar-‐ Sealed with Chevron Gland 400Bar at 100Deg C Tool MounDng Industry Standard taper Tool RetenDon Manual Drawbar Max Pressure raDng 100Bar (1480psi) Spindle Speed 40RPM with Propipe – H1515 Power Pack Feed Rate 0.07mm / rev Depth Measurement by measuring rod Drive system Hydraulic Motor, lubricaDon free belt drive Hydraulics Pressure 1750psi(118 bar)-‐2000psi(135bar)
Tapping machines are used for making connecDons to pipelines, tanks, and plant piping without shutdown and are used to make hot taps in preparaDon for plugging machine applicaDon. Our Models series 3000 can be either air or hydraulically used.
Features The machine includes: Lower in crank, Measuring rod, Retainer rod pusher, Ring Gasket, Bleeder valve and nipple, Motor adapter, Set of bolts and nuts, Lock-‐O-‐Ring bypass gauge
RAISED FACE (RF) ADAPTOR Size Class 150 Class 300 Class 600
inch mm Stock Number Stock Number Stock Number 4 100 PHA-3000-150-04 PHA-3000-300-04 PHA-3000-600-04 6 150 PHA-3000-150-06 PHA-3000-300-06 PHA-3000-600-06 8 200 PHA-3000-150-08 PHA-3000-300-08 PHA-3000-600-08 10 250 PHA-3000-150-10 PHA-3000-300-10 PHA-3000-600-10 12 300 PHA-3000-150-12 PHA-3000-300-12 PHA-3000-600-12 14 350 PHA-3000-150-14 PHA-3000-300-14 PHA-3000-600-14 16 400 PHA-3000-150-16 PHA-3000-300-16 PHA-3000-600-16 18 450 PHA-3000-150-18 PHA-3000-300-18 PHA-3000-600-18 20 500 PHA-3000-150-20 PHA-3000-300-20 PHA-3000-600-20
STANDARD CUTTER Size
Stock Number inch mm
4 87.3 PSC-3000-04 6 138.9 PSC-3000-06 8 185.8 PSC-3000-08 10 241.3 PSC-3000-10 12 292.1 PSC-3000-12 14 323.9 PSC-3000-14 16 373.1 PSC-3000-16 18 383.0 PSC-3000-18 20 432.0 PSC-3000-20
LINESTOP CUTTER Size
Stock Number inch mm
4 100.0 PLC-3000-04 6 150.8 PLC-3000-06 8 200.0 PLC-3000-08 10 250.8 PLC-3000-10 12 300.1 PLC-3000-12 14 331.8 PLC-3000-14 16 382.6 PLC-3000-16 18 432.0 PLC-3000-18 20 483.0 PLC-3000-20
PILOT DRILL inch mm Stock Number
4 100 PPD-3000-04 6 150 PPD-3000-06 8 200 PPD-3000-08 10 250 PPD-3000-10 12 300 PPD-3000-12 14 350 PPD-3000-14 16 400 PPD-3000-16 18 450 PPD-3000-18 20 500 PPD-3000-20
CUTTER HOLDER Size
Stock Number inch mm
4 100 PCH-3000-04 6 - 20 150 - 500 PCH-3000-06
LOR PLUG HOLDER Size
Stock Number inch mm
4 - 20 100 - 400 PPH-3000-0420
! propipe HQ Hermanos Gascon, 14 28050 Madrid-Spain Ph +34 639 121 305 Fx +34 911 518 465 propipe engineering (Madrid) propipe fze (Dubai) propipe USA (Houston)
[email protected] www.propipe.eu
Manual Sandwich Valves Size Class 150 Class 300 Class 600
inch mm Stock Number Stock Number Stock Number 4 100 PSV-04-150 PSV-04-300 PSV-04-600 6 150 PSV-06-150 PSV-06-300 PSV-06-600 8 200 PSV-08-150 PSV-08-300 PSV-08-600
10 250 PSV-10-150 PSV-10-300 PSV-10-600 12 300 PSV-12-150 PSV-12-300 PSV-12-600 14 350 PSV-14-150 PSV-14-300 PSV-14-600 16 400 PSV-16-150 PSV-16-300 PSV-16-600 18 450 PSV-18-150 PSV-18-300 PSV-18-600 20 500 PSV-20-150 PSV-20-300 PSV-20-600
! propipe HQ Hermanos Gascon, 14 28050 Madrid-Spain Ph +34 639 121 305 Fx +34 911 518 465 propipe engineering (Madrid) propipe fze (Dubai) propipe USA (Houston)
[email protected] www.propipe.eu
5000 Series Tapping Machines
DescripDon
SpecificaDons Drilling Capacity Stroke Model 5078 12” – 36” 78” Model 5108 12” – 42” 108” Model 5130 12” – 56” 130” Dimensions Length 3100mm, Height 760mm, Width 870mm Weight 990 kg MounDng 6”Class 600 RTJ Type Flange Boring Bar 100 mm Diameter Chrome Plated One piece bar Sealed with Chevron Gland 400Bar at 100Deg C Tool MounDng Industry Standard taper Tool RetenDon Manual Drawbar sealed with Chevron Gland Max Pressure raDng 100Bar (1480psi) Spindle Speed 25 RPM with Propipe – H3024 Power Pack Feed Rate 0.12 mm / rev Depth Measurement Absolute Linear Scale mounted alongside machine, no
measuring rod required. Three presentable pointers. Drive system Hydraulic Motor driving spindle via HTD Belt ensuring
lubricaDon and maintenance free spindle drive. Rapid Boring Bar Travel by Hydraulic Motor Hydraulics Pressure 1750psi(118bar)-‐2000psi (135bar) Max
Tapping machines are used for making connecDons to pipelines, tanks, and plant piping without shutdown and are used to make hot taps in preparaDon for plugging machine applicaDon. Our Models series 5000 are hydraulically operated.
Features The machine includes: Lower in crank, Measuring rod, Retainer rod pusher, Ring Gasket, Bleeder valve and nipple, Motor adapter, Set of bolts and nuts, Lock-‐O-‐Ring bypass gauge
! propipe HQ Hermanos Gascon, 14 28050 Madrid-Spain Ph +34 639 121 305 Fx +34 911 518 465 propipe engineering (Madrid) propipe fze (Dubai) propipe USA (Houston)
[email protected] www.propipe.eu
RAISED FACE (RF) ADAPTOR Size Class 150 Class 300 Class 600
inch mm Stock Number Stock Number Stock Number 12 300 PHA-5000-150-12 PHA-5000-300-12 PHA-5000-600-12 14 350 PHA-5000-150-14 PHA-5000-300-14 PHA-5000-600-14 16 400 PHA-5000-150-16 PHA-5000-300-16 PHA-5000-600-16 18 450 PHA-5000-150-18 PHA-5000-300-18 PHA-5000-600-18 20 500 PHA-5000-150-20 PHA-5000-300-20 PHA-5000-600-20 24 600 PHA-5000-150-24 PHA-5000-300-24 PHA-5000-600-24 28 700 PHA-5000-150-28 PHA-5000-300-28 PHA-5000-600-28 32 800 PHA-5000-150-32 PHA-5000-300-32 PHA-5000-600-32 36 900 PHA-5000-150-36 PHA-5000-300-36 PHA-5000-600-36 40 1000 PHA-5000-150-40 PHA-5000-300-40 PHA-5000-600-40 42 1050 PHA-5000-150-42 PHA-5000-300-42 PHA-5000-600-42
STANDARD CUTTER LINESTOP CUTTER PILOT DRILL
Size Stock Number
Size Stock Number
Size Stock
Number inch mm inch mm inch mm 12 292 PSC-5000-12 12 300 PLC-5000-12 12 300 PPD-5000-12 14 324 PSC-5000-14 14 332 PLC-5000-14 14 350 PPD-5000-14 16 373 PSC-5000-16 16 383 PLC-5000-16 16 400 PPD-5000-16 18 383 PSC-5000-18 18 432 PLC-5000-18 18 450 PPD-5000-18 20 432 PSC-5000-20 20 483 PLC-5000-20 20 500 PPD-5000-20 22 483 PSC-5000-22 22 533 PLC-5000-22 22 550 PPD-5000-22 24 533 PSC-5000-24 24 584 PLC-5000-24 24 600 PPD-5000-24 26 584 PSC-5000-26 26 635 PLC-5000-26 26 650 PPD-5000-26 28 635 PSC-5000-28 28 686 PLC-5000-28 28 700 PPD-5000-28 30 686 PSC-5000-30 30 737 PLC-5000-30 30 750 PPD-5000-30 32 737 PSC-5000-32 32 787 PLC-5000-32 32 800 PPD-5000-32 34 787 PSC-5000-34 34 838 PLC-5000-34 34 850 PPD-5000-34 36 838 PSC-5000-36 36 889 PLC-5000-36 36 900 PPD-5000-36 38 889 PSC-5000-38 38 937 PLC-5000-38 38 950 PPD-5000-38 40 937 PSC-5000-40 40 987 PLC-5000-40 40 1000 PPD-5000-40 42 987 PSC-5000-42 42 1038 PLC-5000-42 42 1050 PPD-5000-42
CUTTER HOLDER
Size Stock Number
inch mm 12 - 42 300 - 1050 PCH-5000-1242
LOR PLUG HOLDER
Size Stock Number
inch mm 12 - 42 300 - 1050 PPH-5000-1242
Manual Sandwich Valves
Size Class 150 Class 300 Class 600
inch mm Stock Number Stock Number Stock Number 12 300 PSV-12-150 PSV-12-300 PSV-12-600 14 350 PSV-14-150 PSV-14-300 PSV-14-600 16 400 PSV-16-150 PSV-16-300 PSV-16-600 18 450 PSV-18-150 PSV-18-300 PSV-18-600 20 500 PSV-20-150 PSV-20-300 PSV-20-600 22 550 PSV-22-150 PSV-22-300 PSV-22-600 24 600 PSV-24-150 PSV-24-300 PSV-24-600 26 650 PSV-26-150 PSV-26-300 PSV-26-600 28 700 PSV-28-150 PSV-28-300 PSV-28-600 30 750 PSV-30-150 PSV-30-300 PSV-30-600 32 800 PSV-32-150 PSV-32-300 PSV-32-600 34 850 PSV-34-150 PSV-34-300 PSV-34-600 36 900 PSV-36-150 PSV-36-300 PSV-36-600 38 950 PSV-38-150 PSV-38-300 PSV-38-600 40 1000 PSV-40-150 PSV-40-300 PSV-40-600 42 1050 PSV-42-150 PSV-42-300 PSV-42-600
Hydraulic Power Pack 30 HP Diesel
! propipe HQ Hermanos Gascon, 14 28050 Madrid-Spain Ph +34 639 121 305 Fx +34 911 518 465 propipe engineering (Madrid) propipe fze (Dubai) propipe USA (Houston)
[email protected] www.propipe.eu
HYDRAULIC POWER PACK NAME HP STOCK NUMBER
POWER PACK 30 HP PPP-5000-30 POWER PACK 15 HP PPP-3000-15
Hydraulic Pack Power
Hydraulic Actuator Cylinder Line Stop Machines Hotap Sandwich Valves Cuters
Manufacturing
Manufacturing Plant -‐ Spain
Sandwich valves and actuator 48” 600# Sandwich valve
References List
Iran NIGC Nargan Gamma Kayson Dorriz
Colombia Path InternaDonal
Russia Mirrico Sibur -‐ Rusnano
Brazil Dorf Ketal
Spain C.L.H. Quick Flow
Algeria Sonatrach Amerada Hess
Italy Sarpom Exxon mobil
USA Enerteq SoluDons Baker Petrolite
Thailand Canadoil Group
Mexico GPT Services
France Trapil
South Korea Dailem co. Ltd
propipe HQ Hermanos Gascon, 14 28050 Madrid Spain Ph +34 639 121 305 Fx +34 911 518 465
propipe fze RAK Free zone PO Box 16111 United Arab Emirates
propipe Engineering Crta Fuencarral-Alcobendas 14 Bloq C Bajo A 28034 Madrid Spain Ph +34 913 588 589 Fx +34 911 518 465
propipe usa 122 Vieux Carre Dr. Houston TX 77009 USA
[email protected] www.propipe.eu