PDF Stopper cylinders PDF EN DHDNB€¦ · sensing via proximity sensor -- 006 Square flange -- 007...
Transcript of PDF Stopper cylinders PDF EN DHDNB€¦ · sensing via proximity sensor -- 006 Square flange -- 007...
www.festo.com/catalogue/...2016/07 – Subject to change
Compact, Square, Wide flange types¬¬ Easy to adjust damping of shock absorber¬¬ Reliable locking function¬¬ The cylinder with u-packing and oliless bush
Stopper cylinders
DHDNB
Piston diameter 50, 63, 80mm
Stroke length 30, 40mm
Double-acting
Position sensing
Urethane end cushion
PDF ENPDF
Overview/Configuration/Ordering www.festo.co.kr/amiproduct
3
DH
DN
BPneumatic drives >
2 www.festo.com/catalogue/... Subject to change – 2016/07
Product information
Adjustable shock absorber
Mounting & Safe release of locking unit
Adjustable direction of Stopper
Adjustable direction of Stopper
DHDNB can endure various loads due to adjustable shock absorber.
After unraveling the screw, rotate the projecting part of shock
absorber.Following adjusting, screw fasten to fix.
• Locking function is attached as a standard to protect the workpiece
from the return force of spring (option is available).
• Locking releases automatically when the cylinder goes down.
• Locking may be manually released safely without damage when
workpiece moves in opposite direction.
The stopper direction for workpiece is changeable by 90°.
Limit sensor bracket is available for separate order.
Lever detecting switch can be attached.
Compact flange Square flange Wide flange
LOCKING release
(Manual &
opposite direction
release)
LOCKING release
(Manual release & free
pass release)
Manual LOCK
Release lever
Release lever
LOCK (Manual & reverse
direction)
Lever detecting switch
attachable (M8)
LIMIT
SENSOR
BRACKET
Attachable
Adjusting the
Shock absorber
Pneumatic drives >
Stopper cylinders,DHDNB
3
DH
DN
B
Pneumatic drives >
3 www.festo.com/catalogue/...2016/07 – Subject to change
Easy to replace shock absorber
Permissible mass
Lateral force & Operating pressure
Free pass function of the workpiece
Adjustable shock absorber can be fixed with the fixed screw.
Shock absorber is replaced easily by releasing the bolt at the
stopper.
If the angle of lever is changed, the workpiece can be passed
optionally. This function will be released automatically when the
cylinder goes down as well as pulling the manual release lever.
Shock absorber
Shock absorber screw
for fixing
StopperFREE PASS release
Lever holder
Wor
kpie
ce [k
g]La
tera
l for
ce [k
gf]
Speed [m/min]
Pressure [bar]
DHDNB-50/63(AD-2210)
DHDNB-80 DHDNB-63 DHDNB-50
DHDNB-80(AD-3316)
Pneumatic drives >
Stopper cylinders,DHDNB
3
DH
DN
BPneumatic drives >
4 www.festo.com/catalogue/... Subject to change – 2016/07
Ordering Data
Example:
001 002 003 004 005 006 007 008 009 010
DHDNB – 50 – 30 – P – A – – T – – N – L
001 Double acting stopper cylinder -- 002 Piston Φ 50 mm -- 003 Stroke 50 mm -- 004 Flexible cushioning rings/pads at both ends -- 005 Position sensing via proximity sensor -- 006 Resin roller -- 007 Adjustable shock absober -- 008 Double acting and spring built-in -- 009 Lock included -- 010 Bracket included
Stroke [mm]
Part No. Type
Piston Ф 50 [mm]
30 15205229 DHDNB-50-30-P-A-T-L
30 15205230 DHDNB-50-30-P-A-S-T-L
30 15205231 DHDNB-50-30-P-A-T-D-L
30 15205232 DHDNB-50-30-P-A-S-T-D-L
30 15205233 DHDNB-50-30-P-A-T-N-L
30 15205234 DHDNB-50-30-P-A-S-T-N-L
30 15205235 DHDNB-50-30-P-A-T-D-N-L
30 15205236 DHDNB-50-30-P-A-S-T-D-N-L
Type code - DHDNB-50
001 002 003 004 005 006 007 008 009 010
DHDNB – 50 – 30 – P – A – – T – – – L
001 Typ
DHDNB Double acting stopper cylinder
002 Piston Ф [mm]
50 50
003 Stroke [mm]
30 30
004 Cushioning
P Flexible cushioning rings/pads at both ends
005 Position sensing
A Via proximity sensor
006 Roller variant
– Resin
S Stainless steel
007 Shock absorber
T Adjustable
008 Action
- Double acting and spring built-in
D Double acting without spring
009 Lock function
- Lock included
N Lock excluded
010 Inductive switch bracket
L Bracket included
Legend for type code
Mandatory Optional
Stopper cylinders,DHDNB
3
DH
DN
B
Pneumatic drives >
5 www.festo.com/catalogue/...2016/07 – Subject to change
Ordering Data
Stroke [mm]
Part No. Type
Piston Ф 63 [mm]
30 15205237 DHDNB-63-30-P-A-T-L
30 15205238 DHDNB-63-30-P-A-S-T-L
30 15205239 DHDNB-63-30-P-A-T-D-L
30 15205240 DHDNB-63-30-P-A-S-T-D-L
30 15205241 DHDNB-63-30-P-A-T-N-L
30 15205242 DHDNB-63-30-P-A-S-T-N-L
30 15205243 DHDNB-63-30-P-A-T-D-N-L
30 15205244 DHDNB-63-30-P-A-S-T-D-N-L
30 15205245 DHDNB-63-30-P-A-W-T-L
30 15205246 DHDNB-63-30-P-A-W-S-T-L
30 15205247 DHDNB-63-30-P-A-W-T-D-L
30 15205248 DHDNB-63-30-P-A-W-S-T-D-L
30 15205249 DHDNB-63-30-P-A-W-T-N-L
Stroke [mm]
Part No. Type
Piston Ф 63 [mm]
30 15205250 DHDNB-63-30-P-A-W-S-T-N-L
30 15205251 DHDNB-63-30-P-A-W-T-D-N-L
30 15205252 DHDNB-63-30-P-A-W-S-T-D-N-L
30 15205253 DHDNB-63-30-P-A-Q-T-L
30 15205254 DHDNB-63-30-P-A-Q-S-T-L
30 15205255 DHDNB-63-30-P-A-Q-T-D-L
30 15205256 DHDNB-63-30-P-A-Q-S-T-D-L
30 15205257 DHDNB-63-30-P-A-Q-T-N-L
30 15205258 DHDNB-63-30-P-A-Q-S-T-N-L
30 15205259 DHDNB-63-30-P-A-Q-T-D-N-L
30 15205260 DHDNB-63-30-P-A-Q-S-T-D-N-L
Example:
001 002 003 004 005 006 007 008 009 010 011
DHDNB – 63 – 30 – P – A – – – T – – – L
001 Double acting stopper cylinder -- 002 Piston Φ 60 mm -- 003 Stroke 30 mm -- 004 Flexible cushioning rings/pads at both ends -- 005 Position sensing via proximity sensor -- 006 Compact flange -- 007 Resin roller -- 008 Adjustable shock absorber -- 009 Double acting and spring built-in -- 010 Lock included -- 011 Bracket included
Type code - DHDNB-63
001 002 003 004 005 006 007 008 009 010 011
DHDNB – 63 – 30 – P – A – – – T – – – L
001 Typ
DHDNB Double acting stopper cylinder
002 Piston Ф [mm]
63 63
003 Stroke [mm]
30 30
004 Cushioning
P Flexible cushioning rings/pads at both ends
005 Position sensing
A Via proximity sensor
006 Flange type
– Compact
Q Square
W Wide
007 Roller variant
– Resin
S Stainless steel
008 Shock absorber
T Adjustable
009 Action
– Double acting and spring built-in
D Double acting without spring
010 Locking
– Lock included
N Lock excluded
011 Inductive switch bracket
L Bracket included
Legend for type code
Mandatory Optional
Stopper cylinders,DHDNB
3
DH
DN
BPneumatic drives >
6 www.festo.com/catalogue/... Subject to change – 2016/07
Type code - DHDNB-80
001 002 003 004 005 006 007 008 009 010 011
DHDNB – 80 – – P – A – – – T – – – L
001 Typ
DHDNB Double acting stopper cylinder
002 Piston Ф [mm]
80 80
003 Stroke [mm]
... 30, 40
004 Cushioning
P Flexible cushioning rings/pads at both ends
005 Position sensing
A Via proximity sensor
006 Flange type
– Square
W Wide
007 Roller variant
– Resin
S Stainless steel
008 Shock absorber
T Adjustable
009 Action
– Double acting and spring built-in
D Double acting without spring
010 Locking
– Lock included
N Lock excluded
011 Inductive switch bracket
L Bracket included
Legend for type code
Mandatory Optional
Example:
001 002 003 004 005 006 007 008 009 010 011
DHDNB – 80 – 40 – P – A – – – T – – – L
001 Double acting stopper cylinder -- 002 Piston Φ 80 mm -- 003 Stroke 40 mm -- 004 Flexible cushioning rings/pads at both ends -- 005 Position sensing via proximity sensor -- 006 Square flange -- 007 Resin roller -- 008 Adjustable shock absorber -- 009 Double acting and spring built-in -- 010 Lock included -- 011 Bracket included
Stopper cylinders,DHDNB
3
DH
DN
B
Pneumatic drives >
7 www.festo.com/catalogue/...2016/07 – Subject to change
Ordering Data
Recommended switch for DHDNB-50, -63, -80 – Ordering Data
Stroke [mm] Part No. Type
Piston Ф 80 [mm]
30 15205261 DHDNB-80-30-P-A-T-L
30 15205262 DHDNB-80-30-P-A-S-T-L
30 15205263 DHDNB-80-30-P-A-T-D-L
30 15205264 DHDNB-80-30-P-A-S-T-D-L
30 15205265 DHDNB-80-30-P-A-T-N-L
30 15205266 DHDNB-80-30-P-A-S-T-N-L
30 15205267 DHDNB-80-30-P-A-T-D-N-L
30 15205268 DHDNB-80-30-P-A-S-T-D-N-L
30 15205269 DHDNB-80-30-P-A-W-T-L
30 15205270 DHDNB-80-30-P-A-W-S-T-L
30 15205271 DHDNB-80-30-P-A-W-T-D-L
30 15205272 DHDNB-80-30-P-A-W-S-T-D-L
30 15205273 DHDNB-80-30-P-A-W-T-N-L
30 15205274 DHDNB-80-30-P-A-W-S-T-N-L
30 15205275 DHDNB-80-30-P-A-W-T-D-N-L
30 15205276 DHDNB-80-30-P-A-W-S-T-D-N-L
Stroke [mm] Part No. Type
Piston Ф 80 [mm]
40 15205277 DHDNB-80-40-P-A-T-L
40 15205278 DHDNB-80-40-P-A-S-T-L
40 15205279 DHDNB-80-40-P-A-T-D-L
40 15205280 DHDNB-80-40-P-A-S-T-D-L
40 15205281 DHDNB-80-40-P-A-T-N-L
40 15205282 DHDNB-80-40-P-A-S-T-N-L
40 15205283 DHDNB-80-40-P-A-T-D-N-L
40 15205284 DHDNB-80-40-P-A-S-T-D-N-L
40 15205285 DHDNB-80-40-P-A-W-T-L
40 15205286 DHDNB-80-40-P-A-W-S-T-L
40 15205287 DHDNB-80-40-P-A-W-T-D-L
40 15205288 DHDNB-80-40-P-A-W-S-T-D-L
40 15205289 DHDNB-80-40-P-A-W-T-N-L
40 15205290 DHDNB-80-40-P-A-W-S-T-N-L
40 15205291 DHDNB-80-40-P-A-W-T-D-N-L
40 15205292 DHDNB-80-40-P-A-W-S-T-D-N-L
Cablelength
Electricalconnection
Part No. Type
AC welding immune switch, for T-slot, built-in LED, KSMTR-2 Technical details: Page xxx
3m 2-wire 15028056 KSMTR-2-K-LED-24-SA
5m 2-wire 15038515 KSMTR-2-K5-LED-24-SA
0.5m Cable with plug M12x1 (1,4 pin) 15083977 KSMTR-2-S-LED-24-SA34199KR
0.5m Cable with plug M12x1 (3,4 pin) 15028113 KSMTR-2-S-LED-24-SA
Stopper cylinders,DHDNB
3
DH
DN
BPneumatic drives >
8 www.festo.com/catalogue/... Subject to change – 2016/07
General technical data
Stopper cylinders,DHDNB
3
DH
DN
B
Pneumatic drives >
9 www.festo.com/catalogue/...2016/07 – Subject to change
Dimensions
Compact Flange type
Stopper cylinders,DHDNB
3
DH
DN
BPneumatic drives >
10 www.festo.com/catalogue/... Subject to change – 2016/07
Dimensions
Square Flange type
Stopper cylinders,DHDNB