8/2/2019 PComP Brochure

http://slidepdf.com/reader/full/pcomp-brochure 1/2

MesoCoat, the new Duracell of the coa

industry, is a venture-backed nanotech

materials science company, fast becom

world leader in metal protection and r

through their revolutionary ‘long life’ c

and ‘high speed’ cladding technologie

IMAGINE PCmP™Imagine advanced coating materials that are put through the

toughest abuse and still come out shining, coatings that last

longer than us, coatings that are not just good or one applica-

tion but can withstand severe wear, corrosion and thermal con-

ditions in a variety o applications. Imagine coatings that make

the impossible - possible, that increase the lie o components

by 3-20 times and yet are cheaper, lighter, and save us rom the

use o toxic materials.

Applicain

Hard Chrome replacementh

Aerospace and Deenseh

Oil and Gash

Energy Generationh

Processing and Refningh

Chemical and Petrochemicalh

Pulp and Papersh

Other applications to replace tungsten carbide cobalth

Phne: 216.453.0866Fax: 216.404.0054Email: ino@mesocoat.com

MeCa Inc.24112 Rockwell Drive,Euclid, OH, 44117

www.MEsoCoAt.CoM

TrANsforMING ThE World ThrouGh surfACE ENGINEErING

8/2/2019 PComP Brochure

http://slidepdf.com/reader/full/pcomp-brochure 2/2

PCmP™ CErMETsMicr/Nancmpie CeramicMeallic CmpiePComP™ metal-ceramic coatings replace electrolytic

hard chrome, electroplating, spray and use, and ther-

mal spray carbides; to impart wear and corrosion resis-

tance, and reduce riction in sliding wear applications.

Cermet coatings are easy and ast to apply, and ma-

chine to tight tolerances or dimensional restoration o

OEM or worn E&P components.

Hierarchically srucuredMicr/Nan Cmpie

Near-Nan Cmpie Cre

High Hardness and Wear resistanceh

Contains nano-dispersed riction modifersh

Provides or ast machiningh

Binder Caing

Improves Adhesion and Efciencyh

Provides Toughness and Resiliencyh

Provides Corrosion Resistance and Bondingh

Prevents compositional changes during sprayh

PCmP Prduc LinePCmP™ t-Ht: High Toughness, corrosion resistant Nanostructured

Titanium cermet. It is highly resilient, machines quickly, has very low

riction and replaces chrome and carbides in shat, seal, plunger, and

valve applications. PComP™ T-HH can be machined with alumina or

SiC wheels, and has build-up rates 3-5X that o carbides (cuts spray

time up to 80%); and with its high build rate and low stress can be

readily used to repair worn components up to 0.025 inches.

PCmP™ s: Lower density, spallation-resistant nanocomposite ther-

mal spray coating or chrome replacement in aerospace and other

weight critical applications.

PCmP™ t-HH: Higher hardness wear resistant nanocomposite cer-

met with cobalt-based matrix. It provides higher wear resistancethan T-HT when in contact with drilling mud, with good corrosion

resistance. It is primarily used in sliding wear with environments

that contain suspended solids.

PCmP™ w: Premium High toughness nanoengineered WC-Co sys-

tem. High deposition efciency, and 4-7X the toughness o con-

ventional carbide at 1400-1600VHN. It is ideal or use in valve trim

and seats on gate valves, and in sand erosion and three body wear

environments. Shows 3-7X lie in downhole applications.

Value Prpiin

Lowest lie cycle costh

Drop-In Replacementh

Spray eedstocks, a

patible with most th

equipments

Lower Density produh

spray cell productivity

3-5X grinding efcieh

cost and improves

productivity by 3-5X

burning o high streng

4-10X toughness/duch

dard carbide coatings

lie, reduces risk o in

(spallation)

Up to 100X lower systh

Environmentally-riendh

no hexavalent chrome

Ctm stin

PComP™ nanocomposite thermal spray powders offer an unpar-

alleled combination of toughness, hardness, low friction, and

affordability that provide a unique, patented coating micro-

structure that combines high hardness zones of a ductile metal

in an optimum geometry.

Iea ha Cme repacement

Recent changes in federal acquisition regulations have banned

the purchase of systems and components which have been

treated using hexavalent chrome plating techniques, creating

a burgeoning demand for cost-effective, rapidly deployable

alternatives such as thermal spray cermets within the military

procurement system. PcomP ST is an ideal chrome replacement

in aerospace and other weight critical applications.

EXTrEME CoATINGs. suPrEME rEsu

PCmP™ Cerme

Bin

Nan

www.MEsoCoAt.CoM www.MEs