Passive Components - oriontronix.ruoriontronix.ru/resources/pdf/Passive Brochure_WEB_17 10...

If you haven’t tried TTI, then please call us to find outwhat a true specialist can offer.

Passive ComponentsProduct Guide

The World's Leading Passive and Connector Specialist

www.ttieurope.com

TTI Sales

www.ttieurope.com


By D4 See: www.d4online.com

PB: 1007V4

AUSTRIAViennaT: +43 (0) 18 79 85 90F: +43 (0) 18 79 85 90 10E: [email protected]

BENELUXEindhovenT: +31 (0) 40 290 1616F: +31 (0) 40 290 1610E: [email protected]

CZECH REPUBLICT: +420 541 225 215F: +420 541 228 285E: [email protected]

DENMARKCopenhagenT: +45 (0) 43 29 35 35F: +45 (0) 43 29 35 30E: [email protected]

FINLANDT: +358 9 83642340F: +358 9 83642341E: [email protected]

FRANCEBriveT: +33 (0) 5 55 92 92 93F: +33 (0) 5 55 92 91 90E: [email protected](Covering North Africa)

GERMANYMunichT: +49 (0) 81 42 66 80 110F: +49 (0) 81 42 66 80 199E: [email protected]

HanoverT: +49 (0) 5 11 7 80 59 0F: +49 (0) 5 11 7 42 49 0E: [email protected]

PforzheimT: +49 (0) 7231 14788 0F: +49 (0) 7231 14788 99E: [email protected]

DortmundT: +49 (0) 2301 91 304 0F: +49 (0) 2301 91 304 11E: [email protected]

HUNGARYBudapestT: +36 1 40 20 807F: +36 1 40 20 808E: [email protected]

IRELANDT: +353 (0) 21 4808070F: +353 (0) 21 4323350E: [email protected]

ISRAELT: +972 9 74333 36F: +972 9 74333 55E: [email protected]

ITALYMilanT: +39 02 822 521F: +39 02 822 522 33E: [email protected]

PadovaT: +39 049 774683F: +39 049 7927738

BolognaT: +39 051 632 1863F: +39 051 714 839

NORWAYT: +47 (0) 32 20 09 50F: +47 (0) 32 20 09 51E: [email protected]

POLANDKwidzynT: +48 (0) 55 279 67 57F: +48 (0) 55 279 75 50E: [email protected]

ROMANIACluj NapocaT: +40 (0) 264 439 103F: +40 (0) 264 439 106E: [email protected]

SLOVAKIABratislavaT: +421 (0) 905 575661F: +421 (0) 32 7430265E: [email protected]

SOUTH AFRICAT: +27 (0) 11 795 1050F: +27 (0) 11 795 1298E: [email protected]

SPAIN / PORTUGALBarcelonaT: +34 (0) 93 645 25 75F: +34 (0) 93 645 25 93E: [email protected]

Matiena-AbadianoT: +34 (0) 94 623 25 80F: +34 (0) 94 623 25 81E: [email protected]

SWEDENStockholmT: +46 (0) 8 594 11 800F: +46 (0) 8 594 11 801E: [email protected]

GothenburgT: +46 (0) 31 741 12 90F: +46 (0) 31 741 12 91E: [email protected]

SWITZERLANDBaarT: +41 (0) 41 76741 90F: +41 (0) 41 76741 99E: [email protected]

TURKEYT: +90 (0) 216 462 0097F: +90 (0) 216 462 0098E: [email protected]

UNITED KINGDOMHigh WycombeT: +44 (0) 1494 460000F: +44 (0) 1494 460090E: [email protected]

EssexMilitary Aerospace OfficeT: +44 (0) 1268 889520F: +44 (0) 1268 419225E: [email protected]

ScotlandT: +44 (0) 1698 464050F: +44 (0) 1698 464051E: [email protected]

CORPORATE HEADQUARTERSTTI Inc.2441 Northeast ParkwayFort WorthTexas 76106U.S.A.T: +1 817 740 9000F: +1 817 740 9898

EUROPEAN HEADQUARTERSTTI, Inc.Ganghoferstr. 3482216 Maisach-GernlindenGermanyT: +49 (0) 81 42 66 80 0F: +49 (0) 81 42 66 80 490E: [email protected]

www.ttieurope.com

Index

About TTI

TTI is a speciality distributor of Passive, Interconnect and Electromechanical components that exists to accomplish three major goals:

• Be the most preferred electronics distributor for our customers and suppliers, delivering the right parts exactly on time.

• Exceed our internal and external customer requirements through continuous improvement.

• Provide a home for hardworking, dedicated, knowledgeable and ethical people who believe in this company and this philosophy.

TTI concentrates on the basic strategy of focusing on passive products and striving to be the bestat what we do. No other company offers the unique combination of benefits we provide:

• World class Line Card • Product knowledge experts

• Local sales and product support • Broad and deep inventory profile

• Focused support for design-in • Quality and reliability

• Full suite of supply chain services • TTI was built from a buyer’s point of view

Mission Statement

Why buy from TTI?

TTI European Operations are headquartered inMaisach-Gernlinden, near Munich, Germany.

This purpose built facility occupies 13 000m2, with 20 000m2 of dedicated warehouse space onthree levels.

We provide local service in 29 sales locations acrossEurope.

Our suppliers are the most innovative and capable inthe electronics industry. With them, we put emphasison know-how, focus products and logistics to provideour customers with industry leading service andmarket value.

TTI, Inc.

www.ttieurope.comPage 1

Linecard - Passives

www.ttieurope.com Page 2

AVX


AVX offers customers the benefits of global manufacturing anddistribution provided by 26 manufacturing facilities in 13countries. With research and development centres in fivelocations around the world, AVX and TTI are committed to newproduct design to meet customer demand for miniaturisation,improved performance and reduced cost. AVX's broad range ofcomponents includes capacitors, resistors, timing devices,filters, integrated passive components and circuit protection.Featured below are a selection of exciting products from AVXoffered by TTI.

AVX Ltd, a recognised leader in the global passiveelectronic component and interconnect productsindustry, is at the forefront of technology, design,manufacturing and supply.

High Capacitance Ceramics• X5R and X7R ceramic• Up to 100uF offering• Excellent ESR performance• FLEXITERM® termination finish available• Commercial and automotive qualified

Ceramic Chip Capacitors• Dielectrics NP0, X5R, X7R, X8R, X7S, Y5V• FLEXITERM® and FLEXISAFETM offerings• High temperature X8R and High CVTM range• Capacitor arraysTM, standard and FLEXITERM®

• Commercial, automotive, COTS+, CECC and MIL qualified

High Reliability Tantalum Devices• TAZ - Military and Medical Range• TBW - Fused Tantalum Capacitors• CWR15 - Hi Rel Microchip• CWR Military and COTS Plus• SMD and Leaded available

High Voltage / High Reliability Ceramics• High voltage / high reliability ceramics• Outstanding ESR / ESL performance• Non-polar construction• Capacitance availability to 1300uF• RoHS options available• Commercial, CECC, MIL, DSCC and ESCC

qualified ranges

OxiCap® Niobium Oxide* Capacitors• Non-burn solution• Low voltage applications• High capacitance (up to 1000uF)• A,B,C,D,E,V case sizes• 20% voltage derating• Low ESR*Niobium oxide capacitors are made under license fromCabot Corporation

Tantalum Chip Capacitors• Miniaturised versions 0402 - 0805 case sizes• Very low ESR (multi anode versions available)• Automotive range - THJ 175°C High Temp, TRJ • TPM - Multi anode including 50V version• HiCV + Low Profile TLJ 1.2mm height

Pulse Super Capacitors• High capacitance 20mF to 1F• Very Low ESR down to 25 milliohm• Low profile• High power pulse capability• Non-polar

Leaded Capacitors• Ceramic, Tantalum and Film Dielectrics • Axial and Radial Designs• Automotive Ceramic Radial Range AR• Military Qualified

Film Capacitors• Leaded and SMT• Self healing provides safe open circuit failure mode• No piezo effect• Dielectric PET, PEN, PPS Dielectrics• 16V to 630V voltage ranges• 1206 to 6054 case sizes

AVX

www.ttieurope.com

Timing Devices• Ceramic resonators up to 60MHz• SAW resonators• Quartz crystal• Clock oscillators• Stable product• Full range of case sizes

RF and Microwave Devices• Porcelain (P90) and NPO dielectric• High current• Hi Q• Low ESR• High stability• See Feature Product Page

Tin / Lead (SnPb) finish MLCC• NP0, X5R, X7R and X8R dielectrics • Voltage range from 6.3 to 5000V • Low inductance capability • FLEXITERM® soft termination capability • Coupling, decoupling, filter and snubber circuits

FLEXITERM® and FLEXISAFE™

• Increases resistance to cracking • Thermal / mechanical shock damage resistance • FLEXITERM up to 2x standard bend test • FLEXISAFE utilises internal cascade design • FLEXISAFE improved ESD and ESR performance

630V Ceramic Capacitors• High capacitance 0.56uF • Low ESR at high frequency • Low leakage • High current handling • For SMPS, high voltage coupling and DC blocking

LGA low inductance capacitors• Two terminal simple construction / design • 0204, 0306, 0508, 0805 case size • Ultra low ESR (down to 27pH) • High capacitance (up to 2.2uF) • Land grid array for improved bond strength

NTC Thermistors• Leaded and SMT• Temperature range: -55°C up to 150°C• Resistance range: up to 1M Ohms• Measuring accuracy: 1 up to 5%• RoHS part, lead free profile solder compatible

Filters• EMI, SMT, Array Cylindrical, Bolt, and

Soldering Systems• High Current Feedthru• Feedthru Arrays - 4 Element• SAW• Leaded and SMT Crystal Filters• Thin Film Low Pass Filters

Varistors (MLV and MOV)• TransGuard® - 0402 to 1210, 3.3 to 60V• 0405 and 0508 two element array versions• 0508 and 0612 four element array versions• Medium power versions• CANbus, USB and AntennaGuard versions• Leaded and SMT

Other AVX Products• Medium Power Film Capacitors• High Power Film Capacitors• Piezo Generators• Thin Film Devices• Fuses 0401 to 0612, up to 4 Amps• Module Devices• Integrated Passive Devices

Page 4

AVX

www.ttieurope.com

Feature Product

Ceramic Chip Capacitors• AECQ200 qualified ranges• NP0, X7R and X8R availability• FLEXITERM® and FLEXISAFETM ranges

available

Tantalum / Niobium Oxide Capacitors• TRJ, THJ dedicated automotive products• THJ up to 175˚C continuous operating

temperature• NOJ niobium oxide non-burn up to 8V applications

Protection Devices• Multi Layer Varistors - Transguard®

• Canbus protection devices• NTC Thermistors

Support Tools

• AVX corporate digital catalogue CD-ROM

• Hardcopy catalogues

• Automotive CD-ROM

• AEC-Q200 data package

• Application guides

• Presentation materials

• Samples readily available

AEC-Q200 AutomotiveQualified PassiveComponent OfferingAVX Ltd recognise the importance of such devices for this sector andmuch emphasis has been made to develop products in line with thetough constraints often imposed by the design engineering community.

AVX Ltd is one of the passive component manufacturers that has ledthe way in developing technology, whilst being able to providereliable product for safety critical applications.

Design Engineers should consider these Automotive Solutions forother applications where high reliability is required.

AEC-Q200 has been developed by Automotive manufacturers, AVXhas developed and responded to this Automotive Standard andstrongly recommend that parts qualified to this standard be used bythe Design Engineer for Automotive Applications.

Timing Devices• SAW devices for keyless entry• SMD Resonators• Telematics applications

Page 5

AVX

www.ttieurope.com

High Directivity Couplers (0402, 0603)

• Very high directivity• Low parasitics• 4 terminal• 3 Watts continuous• Low profile (0.35mm)

3dB Couplers (0805)

• 0805 case size• 10 Watts continuous• 4 terminal• Low insertion loss• High isolation

EMI Miniature Screw-in / Solder-in Filters• World’s smallest bulkhead filters 73mm diameter• Screw-in and Solder-in style• Superior insertion loss up to 10Ghz• Available in L, C or T circuit• Rugged discoidal capacitor design

LGA Inductors (0402)

• Tight tolerance (A=0.05nH, D=0.5nH)• Low parasitics• Improved heat dissipation• Low profile• Taped and reeled

Low ESR Capacitors SQ (0603, 0805, 0505, 1111)• Very low ESR• High self resonance• WVDC to 500 VDC• High Reliability version available• RoHS compliant

Directional Couplers (0603, 0805)

• 50 ohm impedance• 800Mhz 6GHz• 3 Watts continuous• Low profile (0.60mm)• RoHS compliant

Low pass filter (0603)

• 50 ohm impedance• 3 Watts continuous• 800MHz 3.5GHz• 4 terminal• Low profile

Inductors (0603, 0805)

• Very tight tolerance (B=0.1nH, D=0.5nH)• High Q• High self resonance• High RF power capability• Low DC resonance

Ultra Tight Tolerance RF Capacitors (Accu-P)

• Tight tolerance (P=0.02pF, C=0.25pF)• No secondary resonances• Repeatable performance (lot to lot)• 0201 to 1210 case size• Low ESR

High Power, Leaded RF Capacitors• 600 to 4000 VDC• High Current capability• Low ESR• Non-magnetic version available• Axial ribbon / Microstrip

The future is now! AVX RF / Microwave componentsAVX offers a broad range of standard and custom products for RF / Microwave applications including: Bluetooth, RFID, GPS, WiFi, WiMAX, WiBRO,Zigbee and even optical applications, up to 40 Ghz. In addition they can provide products for higher power RF applications including medical MRI,semiconductor power supplies and impedance matching networks. Some examples of their technology leadership includes: the World’s smallesthigh directivity coupler, the tightest tolerance RF inductors and capacitors. The unique and broad range of capacitors enables us to offerprice / performance solutions ranging from P90 to NP0, to precision thin film devices for the best in next generation RF designs.

Page 6

Bourns


Bourns continually invests in new products, whether these are developedby the Bourns organisation or are the result of acquisitions or licensingof technologies. Bourns manufactures over 4,000 products and hasmanufacturing facilities and customer support teams located throughoutthe world. Bourns product offering is ideally suited to Telecom, industrialautomation and control, EDP, test and measurement, medical andautomotive and in many applications.Bourns offer high volume commercialpanel controls, precision potentiometers, trimming potentiometers andnetworks, sensors and controls, encoders, speciality resistive products,circuit protection products, diodes, inductors & transformers, switches,integrated circuits, micro modules, as well as custom capabilities fornumerous one-of-a-kind applications.

Bourns was founded over 60 years ago around a simple philosophy: provide top-quality products,responsive service and high value for customers.

Switches• Surface Mount and Through Hole Mounting• PC pins, Gull Wing and J-Hook terminal styles• 3, 4 and 6mm• Sealed for board wash processes• Tube and embossed tape carrier

Speciality Resistive ProductsPower Resistors

RF• Powers up to 800W max • Thick film on ceramic• Applications include drop in isolators,

combiners, duplexers, heatersSurge Resistors• Thick-film in TO220, Surface Mount Wire

Wound• Applications include Central Office,

Networks, Inverters, Actuators, Braking Resistors

Shunt Resistors• Rated current of up to 150A• TCRs of 20 PPM• Minimum resistance values of less than

1 milli-Ohm• Applications include battery chargers,

OEM power supplies, emergency power

J.W.Miller MagneticsSurface Mount• Chip Inductors, Beads and Arrays• Power Inductors (Shielded/Unshielded)• Common Mode Chokes• Common Mode Chip Inductors• Inductors / Transformers• High Current Toroid Inductors• CCFL Inverter Transformers• Multi 6 Pack Inductors / TransformersThrough-Hole• Wide variety and range of Chokes and

Toroid Inductors• On-line Parametric Search

Circuit Protection Products• Ceramic PTC Resettable Fuses• Gas Discharge Tubes• Hybrid Protectors - MSP®

• ESD Protectors• Line Protection Modules• Polymer PTC Resettable Fuses-Multifuse®

• Signal & Dataline Protectors• Telecom Fuses - TelefuseTM

• Thyristor Surge Protectors-TISP®

• TVS Diodes• TVS Diode Arrays

Inductors & Transformers• Standard inductance values from 1nH to100mH• Chip Inductors 20 models from 1mm to 4.5mm • 86 SMD Power Inductors models up to

60Amps, shielded and non shielded, ferrite andcorodial cores

• Common Mode Chokes and Line Filters• Operating temperature up to +150ºC• Sealed and open construction• Line matching, RF, LAN (POE) and ADSL• Surface Mount and Through Hole models• Series includes CM, CF, CW, CI, SDR, SRR,

SRP, SRU• On-line Parametric Search

Diodes• Diode Networks• Rectifier Diodes• Schottky Diodes• Small Signal Switching Diodes• Steering Diode Arrays• TVS Diodes• TVS Diodes Arrays• Zener Diodes

Bourns


Precision Control• Bushing• PC mount• Snap In• Servo mount• Linear• Audio taper• Custom taper• 13 to 51mm diameter

Industrial Encoders• Bushing• PC board• Snap In• Contacting - 6 PPR to 36 PPR options• Optical - 25 PPR to 256 PPR options• 9, 16, 22mm square and 16mm x 22mm

Industrial Panel Control• Bushing• PC mount• Snap In• Linear• Audio taper• Custom taper• 9 to 23mm

Commercial Panel Controls & EncodersEncoders• Incremental contacting, absolute contacting

and rotary optical - all continuous rotation• Mounting: bushing, PCB pins, PCB bracket

and Snap In• 6, 9, 12, 16, 22mm square, 16 x 21mm sizes

Panel Controls• Slide, rotary and linear motion potentiometers,

and pot / switches with metal and plastic shafts• Terminals: solder lugs, PCB pins, L-pattern,

J-hooks, leadwire-flexible• 6-22mm sizes

Trimpot® Trimming PotentiometersMulti-turn• Top and side adjust• Cermet and wirewound resistance elements• 3mm - 12.7mm• Surface Mount and Through Hole Mounting• Panel mount options• Available in military approved versions (QPL

and Hi-Rel) • Tube, embossed tape carrier, bulk, “radial”

tape & reel and ammo pack

Single-turn• Top, bottom, side, front and back adjust• Cermet, wirewound and carbon resistance

elements• 2mm - 9mm• Surface Mount and Through Hole• Sealed and open-frame• Tube, embossed tape carrier, bulk, “radial”

tape & reel and ammo pack

Linear Motion Potentiometers• Flexible “Flying” terminals• Electrical travel from 2.54mm (0.1”) to

12.7mm (0.5”)• 20 and 32mm• Long mechanical life • Essentially infinite resolution• Lightweight• Tube packaging

Resistor & RC Networks• Surface Mount and Through Hole Mounting• SIP and DIP packages• Moulded and conformal-coat packages• Standard resistance values from 10 ohms

to 10 megohms• SIP package height as low as 0.195 inch• Operating temperature range of -55°C to +125°C

Chip Resistors & Chip Arrays• Standard resistance values from 0.01 ohms to

10 megohms• Chip resistors from 0201 to 2512-size• Chip arrays from 0402 x 2-size to 0603 x 8-size• Operating temperature range of -55°C to +125°C• Thick Film and Thin Film• Tolerances of 0.01% to 5%• TCRs of 5PPM to 600PPM

Bourns


Feature Product

Over-Current ProtectionSafety • Reliability • Compliance

TISP® Thyristor Surge Protectors• Planar technology• Product optimised to withstand regional

lightning standards• Bourns technical teams work closely with chipset

manufacturers to endorse the use of BournsSurge Protectors

GDT - Gas Discharge Tubes• TRIGARD® - 3 electrode balanced GDT’s• Mini-TRIGARD™• MSP® Protectors• 2 electrode GDT’s• High voltage tubes (800V and 110V)• 3 electrode GDT’s

Telefuse™ - Telecom Fuses• Surface Mount• Telecom overcurrent protection• Withstand lightning surge and AC power cross

Ceramic PTCsCeramic PTCs for overcurrent protection intelecommunication equipment. Ceramic PTCsprovide line balancing and coordination betweenthe primary and secondary overvoltageprotectors. Packaging include:• Radial Through hole• Radial Through hole in ceramic casing• Twin pack SMD• Agency approved UL, TÜV and CSA

ESD Protection Solutions• Transient voltage suppressor (TVS) diodes• Transient voltage suppressor (TVS) diode arrays• Steering diode arrays• Chipguard® Multlayer Varistors• Schottky Diode Arrays• Active & Passive elements in a single package• Excellent high frequency response• EMI filtering networks• ESD protection to industry specification IEC

61000-4-2• Minimum 8 kV contact and 15 kV air discharge

ESD withstand• SMT packages (0402, 0603, SOD323, SC70-6,

SOT23-6, SOT143A, NSOIC)

Over-Voltage Protection

Circuit ProtectionSolutionsBourns follows a dedicated strategy of offering full circuit protectionsolutions to satisfy individual customer needs. With an extensiverange of passive and active components, Bourns helps solve theglobal need for overcurrent and overvoltage protection. Its range ofproducts allows the safe operation of electronics in such diverseareas of cars to cell phones, set-top-boxes to industrial controllersand PCs to DSL line cards.

Whether you require a single product or a complete solution, Bournscircuit protection range has the answer.

Multifuse® Polymer PTCs• Resettable fuse technology • Surface mount options 0805, 1206, 1210, 1812,

2018, 2920 and 3425• Radial leaded solutions with operational current

ratings up to 11 amps • Polymer PTCs provide overcurrent protection• Agency approved UL, TÜV and CSA• Automotive Solutions• Easy to use Multifuse® product selection worksheet

Line Protection Modules• Telecommunication line protection modules• Secondary overcurrent protection• High lightning withstand• Integrated thick film, fuses and PTC’s• Through Hole and Surface Mount

Bourns


Bourns Inductor SolutionsA Commitment to Excellence.Inductive components have been part of the Bourns product line for more than 35 years. Currently offering 20 models of chip inductors and 86 modelsof power inductors or common mode chokes, Bourns inductor components are used in a wide variety of applications including cellular phones, keylessentry, cable television, global positioning systems, DC-DC convertors, power supplies, and in many portable electronic devices.

SRU Shielded Power InductorsFeatures: SRU series• 0.8µH to 330µH • Octagonal form factor • 2mm, 3mm, 5mm, 6mm, 8mm and 10mm sizes • Advanced ferrite material for low DCR• Common footprints across multiple device options • Multiple model selection within one size • RoHS compliant

SRP High-Current Power InductorsFeatures: SRP series• Currents up to 60A • 1µH to 10µH • DCR well below 1.0mΩ • Form factors 7mm; 8mm; 10mm; 12mm; 13mm • RoHS compliant

SDR Non-Shielded Power InductorsFeatures: SDR round shape series• Round shape where EMI is not an issue but higher current a must compared to equal sizes shielded • 1.0µH to 15mH• 3mm, 4mm, 5mm, 6mm, 10mm and 13mm sizes • Current up to 20.0Amps • DCR in mΩ range • E12 Series • RoHS compliant

Chip Inductors for the Industrial and High-End Consumer ApplicationsFeatures: CM and CF 45, 32 and 25, plus Model Advantage Matrix by case size• Chip Inductors wire-wound and multi-layer • 10nH to 1mH in 5, 10 and 20% tolerance • 4.5mm, 3.2mm and 2.5mm sizes• Current up to 800mA • DCR in mΩ range • E12 Series • RoHS compliant

Chip InductorProduct Size

Body Height

Product Range

Inductance Range

Current Range

Technology

Body Height

Inductance Range

Inductance Tolerance

MOQ

Current

Price

CM4532324.5 x 3.2mm

3.2mm

E12 series

0.1uH to 1.0mH

30mA to 800mA

wire-wound

+++

++

+++

0

CF4532154.5 x 3.2mm

1.5mm

E12 series

0.1uH to 33uH

160mA to 800mA

multi-layer

++

0

++

CM3225223.2 x 2.5mm

2.2mm

E12 series

47nH to 220uH

45mA to 450mA

wire-wound

+++

++

++

0

CF3225132.5 x 2.5mm

1.3mm

E12 series

0.1uH to 33uH

70mA to 450mA

multi-layer

++

0

++

CM2520162.5 x 2.0mm

1.6mm

E12 series

10nH to 100uH

60mA to 280mA

wire-wound

0

+++

++

++

0

CF2520162.5 x 2.0mm

1.6mm

E12 series

0.1uH to 33uH

110mA to 570mA

multi-layer

0

0

++

KEMET


KEMET Corporation is a preferred supplier of capacitors to theworld’s most demanding customers of quality, delivery, and service.KEMET leads the capacitor industry in producing high-performancesolutions including a complete line of Surface Mount Ceramic,Tantalum, and solid Aluminium technologies provided with near-perfect quality and on-time delivery at competitive prices tocustomer locations worldwide. KEMET’s vision is to be thepreferred supplier of standardised components among customersdemanding the highest standards of quality, delivery, and service.

KEMET Corporation is the worlds largest manufacturerof solid tantalum capacitors as well as providingleading edge technology in ceramic, film, paper and aluminium electrolytic capacitors. In summary, KEMET is the capacitance company.

Surface Mount Tantalum Capacitors• Extensive selection of moulded tantalum

chip capacitors• Standard EIA chip sizes• Low-ESR, low-ESR surge robust and ultra-low ESR • Single and Multi Anode Low ESR Solutions• High Temperature Series• Low profile, fail-safe fused• 4V to 50V, in ±10%; ±20% capacitance tolerances• Available in tape and reel packaging

Surface Mount Inductors• Multilayer chip inductors • Wirewound chip power inductors • 0201 - 1812 case sizes • 1nH - 1000uH • MLCI for high frequency applications • High current ferrite chip beads • Multilayer ferrite chip beads

Through Hole Tantalum Capacitors• Radial and Axial• Dipped, molded and herm seal• Wet tantalum• Military approved product• RoHS compliant

Through Hole Ceramic Capacitors• Radial and Axial• Dipped and molded• Military approved product• High voltage up to 3KV• RoHS compliant

Multilayer Ceramic Surface MountCapacitors• 0201-2225 case sizes• 6.3V - 3KV• 0.5pf - 100uF• COG, X5R, X7R, Z5U and Y5V dielectrics• AECQ200 automotive grade product• Flex Crack Mitigation Solutions

Military and Hi Reliability Capacitors• Ceramic, Solid and Wet Tantalum Mil-Spec

capacitors • Leaded and Surface Mount • Ceramic MIL-PRF-11015, MIL-PRF-123,

MIL-PRF-20, MIL-PRD-39014, MIL-PRF-55681 • Tantalum MIL-PRF-55365, MIL-PRF-39003,

MIL-PRF-49137, MIL-PRF-39006 • Ceramic Hi reliability MIL-PRF-123,

GR900 Series • Tantalum Hi reliability GR-500 Series

Polymer Tantalum Surface MountCapacitors• ESR as low as 6 milliohms• Non ignition failure mode• Standard EIA case sizes A - X• Low profile case sizes• Single and multi anode• High temperature series• 15uF - 1,500uF• 2V - 25V

ARCOTRONICSFilm Capacitors• SMD and Through-Hole• Polyester, Polypropylene and Power• Interference Suppression and Polypropylene A.C.• Automotive and SpecialsAluminum Electrolytic Capacitors• SMD, Radial, Snap-In and Screw Terminal• General Purpose and Low ImpedanceCeramic Safety Capacitors• Y1 / X1 and Y2 / X1Wet Tantalum Capacitors• BS, CECC, ESA/SCC, IEC QC, DEF STAN, GAM T1 • High Temperature and Ultra Hi-CVEMC-RFI Filters

KEMET


Automotive Grade Ceramic andTantalum Capacitors• AECQ200 qualified products• Surface Mount or Through Hole• Ceramic and tantalum complete range

Evox Rifa Capacitors• Film capacitors - precision, pulse, EMI Suppression

and general purpose • Paper capacitors - EMI Suppression• Surface Mount and Through Hole • BHC-Aluminium Electrolytic Capacitors - Snap In,

Screw Terminal and Solder Tag

Sierra KD Product• High Voltage Leaded Ceramic

(500 VDC - 10K VDC or better)• High Voltage Ceramic chips (500 VDC - 10K VDC)• High Temperature Leaded Ceramic (+200 and +260˚C)• EMI filters• Electro-Magnetic Interference • Stacked Ceramic (HV and HT)

Polymer Aluminium Surface MountCapacitors• ESR as low as 10 milliohms• High cap rentention at high frequency• No dry out failure mechanism• No voltage derating up to 125˚C• V, D and X cases• 6.8uF - 470uF• 2V - 16V

Are you sure that’s the capacitor you need?

www.ttieurope.com/go/kemet

SPICE software from KEMET

KEMET


Feature Product

KEMET's Flex CrackMitigation SolutionsWith design advances in multilayer ceramic capacitors (MLCC), hascome a new challenge for the design engineer, and that has been aLow IR or short circuit situation due to small cracks close to the endterminations of the ceramic capacitor. This is attributed to boardflexing, however, board flex cannot be eliminated by the capacitormanufacturers. KEMET has taken steps to develop a productportfolio that offers the engineer a number of different reliabilitysolutions, should the problem occur. The KEMET Flex mitigationportfolio consists of four solutions which are...

Floating Electrode - FE Cap The internal construction diagram (above) shows that the electrodesare configured to form multiple capacitors in series within a singleMLCC package. This not only yields improved voltage and ESDperformance over standard designs, but also mitigates the risk oflow-IR or short-circuit failures that can occur due to board flex. Casesizes available are from 0402 to 1812.

Open Mode - Fail Open This design greatly reduces the likelihood of a low-IR or short circuitcondition in a board flex situation. When flexed to failure KEMET's"Open-Mode" capacitor may experience a drop in capacitance but ashort is unlikely because the crack won't typically cross opposingelectrodes (this has been confirmed in extensive testing).Since there won't be any current leakage associated with a typical"Open-Mode" flex crack there is no localised heating and, therefore,no chance for a catastrophic and potentially costly failure event.The Open Mode product is available in 0805 - 1812 case sizes.

Flex Term - FT Cap The FT-CAP is a surface mount Multilayer ceramic capacitor that incorporates a unique and flexible termination system. Integratedwith KEMET’s standard termination materials, a conductive epoxy isutilised between the conductive metallisation and nickel barrier finishin order to establish pliability while maintaining terminal strength,solderability and electrical performance. This technology directsboard flex stress away from the ceramic body and into thetermination area. As a result, this termination system mitigates therisk of low-IR or short-circuit failures associated with board flex.Available in case sizes from 0603 - 1210, the FT Cap offers thegreatest range of capacitance and voltage (CV).

Floating Electrode and Flex Term - FF CapCombining two of the technologies above, KEMET will introduce the FFcap, utilising the Floating electrode construction, along with the flexibletermination system. The CV offering will be the same as the FE Cap,but the addition of the flexible termination offers the design engineer amuch more flex robust and reliable solution for MLCC products.

KEMET


Feature Product

T528 SeriesSurface Mount PolymerTantalum capacitors withface down terminationsThe new Conductive Polymer T528 Series combines ultra low ESR

(Equivalent Series Resistance) and high capacitance in a new

package design that offers the lowest ESL (inductance) in the market

for this type of product. The initial offerings are targeted for high speed

server and microprocessor decoupling - designs that are driving the

demand for low inductance chips.

The continuous demand for greater capacitance and voltage in

smaller case sizes, has caused KEMET to look at alternative

construction methods as well as looking at improved materials to

deliver what the design engineer is looking for.

The T528 series uses a face down termination construction, that

increases the volumetric efficiency of the capacitor, and at the same

time delivers the lowest inductance levels of any polymer tantalum

capacitor on the market. The current cap value offerings range from

68uF to 470uF with voltages from 2.5V to 10V. ESR ratings are as low

as 9 milliohms and ESL as low as 0.7nH at 20MHz.

KEMET is planning to take this technology to smaller case sizes and

larger capacitance values to extend its leadership position in the

polymer tantalum product offering. All products in this series are fully

RoHS compliant and samples are available from TTI.

Features & Benefits

• Ultra low ESR • Low ESL - <20nH at 20 MHz • Improved volumetric efficiency • High frequency cap retention • Non ignition failure mode

KOA


KOA Corporation, founded in Japan in 1940, is amajor supplier of passive components with 4000employees and 24 factories worldwide, supportingour strategic service, sales and logistic centres.

Our emphasis on a worldwide presence allows us to focus on ourglobal customer’s needs and offer Best-In-Class service. A broadproduct portfolio, together with an excellent engineering teamensure high quality and innovative technical support. As yousearch for Surface Mount passive components that will ensurethe optimum performance of your circuit design, count on thebroad line of products from KOA.

Inductors and LTCC Substrates • Wirewound and Thin Film inductors• All custom engineered LTCC substrate foundry

service for RF, high temperature and high reliability applications, interconnect and packaging solutions.

Thick Film Flat Chip Resistors and Networks• Resistors, jumpers and test points• Sizes 01005 - 2512 (inch)• Temperature range -55 - +155 °C• Tolerances 0.5 - 5 %• T.C.R. down to 50 ppm/K• Networks with concave, convex (square or

scalloped corners) terminations

Speciality Thick Film Flat Chip Resistors• Pulse / ESD Surge Proof Resistors SG73 (S / P)• High Voltage Proof Resistors HV73• Inverse Geometry Resistors WK73

Precision Thin Film Resistors andNetworks / Integrated Passives• Precision Thin Film Flat Chip Resistors RN73 (H)• Precision Thin Film MELF Resistors RN41• Integrated Passive Components KPC - Thin

Film on silicon technology (R, C, D, Tr) / IC Packages

Thermistor and Protective Devices• NTC, PTC Thermistors, and Pt-Sensors• Multi-Layer Varistors• Chip Current Fuses

Low Ohm Shunt Resistors in Thick Filmand Metal Plate Technology• Sub-Milliohm Shunts 3 - 6 W PSB / PSI• Milliohm Metal Plate Shunts TLR• High temperature (180°C) Shunts SL(N)• Thick Film Shunts UR73(D), SR73

KOA


Feature Product

High temperaturestability Thin Film chipresistors are suited fortough environmentsKOA’s RN73H series Thin Film chip resistors have been designed tooffer low tolerance precision resistor solutions for tough environments,especially in automotive and industrial applications. The useabletemperature range extends to +155°C while the available T.C.R.reaches as low as +/- 5 ppm/K. An anorganic protection layer incombination with a heat resistant epoxy coating on top of theenhanced NiCr resistive element yield superior moisture stability.

The choice of materials enables the use of this product in toughenvironmental conditions, i.e. high levels of relative moisture and highambient temperatures. Application examples comprise electrical andelectrically powered hydraulic steering aids and engine controllers inthe motor compartment of automobiles. The available standard sizes ofthe new RN73H series have both more rated power and higher ratedtemperature than the standard 125°C Thin Film resistors. At 85°Crated temperature, nominal power dissipations of 0.1 W (0603 size),0.125 W (0805), and 0.25 W (1206) with a minimum tolerance of0.05% are available.

Product Highlights

• Precision Thin Film Resistor RN73• High Precision up to 0.05% / 5 ppm/K• Superior long term stability

• New Product RN73H• Extended temperature range up to 155˚C• Excellent moisture resistance by glass

passivation

• Applications: ECU, instruments, medical, sensors

Lelon


Total Solution for Electrolytic CapacitorsLelon was established in 1976. Currently, Lelon has 5 productionfacilities in Taiwan, China and Malaysia and has become one of themajor electrolytic capacitor manufacturers in world.Lelon offers a diversified product line of Electrolytic Capacitors, whichincludes Aluminium Electrolytic Capacitors (Radial, Axial, Snap In, ScrewTerminal and V-chip), Tantalum Chip Capacitors and ConductivePolymer Aluminium Electrolytic Capacitors (OC-Con).As the result of Lelon's commitment to quality over the years, Lelon hasbeen awarded a series of quality certificates such as ISO-9001,ISO-14001 and TS-16949. Striving for being the best, continuousimprovement in all areas is the consistent spirit and attitude at Lelon.

Conductive Polymer AluminiumElectrolytic Capacitors (OC-Con)• 5m ohm available• 2.5V - 35V• 6.3 x 5 - 10 x 13mm• 2000hrs assured• Ultra low ESR and higher ripple current• Longer useful life

SMD Type• 4V - 450V• 85˚C - 105˚C• 1000 - 5000hrs assured• 3 x 5.3 - 16 x 16.5mm• Low ESR and high reliability• Lead-free reflow reday

Screw Terminal Type• Up to 500V• 85˚C - 105˚C• 2000 - 20000hrs assured• 35 x 53 - 100 x 220mm• Customised specifications available

Chip Tantalum ElectrolyticCapacitors• Low profile, small size and large capacitance

series• J size (EIA 1608) available• -55˚C - 125˚C• 2000hrs assured• General purposes• Low ESR type

Low ESR and High Reliability type• 6.3V - 450V• 2000 - 10000hrs assured• 4 x 5 - 18 x 45mm

Standard Radial/Axial Type• 4V - 500V• 85˚C - 125˚C• 1000 - 3000hrs assured• 3 x 5 - 25 x 50mm

Snap In Type• Up to 500V• 85˚C - 105˚C• 2000 - 5000hrs assured• 20 x 25 - 45 x 100mm• Anti-Vibration structure available• Flame-Retardant design available

Lelon


Feature Product

New Generation ofAluminium E-Cap -OC-ConOC-Con is a new generation of Aluminiumelectrolytic capacitor with organic conductivepolymer as electrolyte.

Due to its excellent electrical characteristics and heat resistibility,OC-Con can provide a better solution for Low ESR and Large RippleCurrent requirements.

V-Chip Type Through Hole Type

OCV• 105˚C, 2000 hours assured• Standard OC-Con with very low ESR• Voltage 2.5V - 25V• Capacitance 6.8uF - 1800uF• Size 6.3 x 6mm - 10 x 13mm

125˚C OCVU• 125˚C, 2000 hours assured• Voltage 2.5V - 16V• Capacitance 100uF - 1500uF• Size 6.3 x 6mm - 10 x 13mm

New OCVZ• 105˚C, 2000 hours assured• Ultra low ESR• Voltage 2.5V - 6.3V• Capacitance 100uF - 2700uF• Size 6.3 x 6mm - 10 x 13mm• ESR 5m ohm available

OCR• 105˚C, 2000 hours assured• Standard OC-Con with very low ESR• Voltage 2.5V - 25V• Capacitance 6.8uF - 1500uF• Size 6.3 x 5.5mm - 10 x 12.5mm

125˚C OCRU• 125˚C, 2000 hours assured• Voltage 2.5V - 20V• Capacitance 47uF - 1500uF• Size 8 x 11.5mm - 10 x 12.5mm

New OCRZ• 105˚C, 2000 hours assured• Ultra low ESR• Voltage 2.5V - 6.3V• Capacitance 22uF - 2700uF• Size 6.3 x 5.5mm - 10 x 12.5mm• ESR 5m ohm available

Littelfuse


As the global leader in circuit protection, Littelfuseoffers the broadest range of products.The breadth of our offering, combined with the extensive experience ofour product and application experts, gives us the unique ability tocomprehensively evaluate our customers’ needs. This allows for a truepartnership with our customers, making it possible to deliver the rightsolution for each application. Solutions from Littelfuse can be foundaround the world in virtually every product that requires electrical partand every application including: automobiles, computers, consumerelectronics, handheld devices, industrial equipment and telecom /datacom circuits.

Fuses• Styles: Surface Mount, Axial, Glass, Ceramic,

Thin Film, Nano2®, Fast-Acting, Slo-blo®

• Current ranges: 0.010A - 35A• Maximum voltage ranges: 32V - 600V• Interrupting ratings from 35A - 200,000A• Lead-free and RoHS parts available

Resettable PTCs• Styles: Surface Mount and Radial Leaded• Surface Mount: plug and play applications• Radial: 30VDC and 60VDC ratings• Component Program of Underwriters

Laboratory recognised• Component Acceptance Program of CSA

recognised• TUV recognised

Varistors• Metal Oxide Varistors (MOVs)

• Peak current ratings: 40A - 70,000A• Peak energy ratings: 0.1J - 10,000J• Styles: Radial Leaded, Axial Leaded, Surface

Mount, packaged, and bare-disk options• Multilayer Varistors (MLVs)

• Peak current ratings: 20A - 500A• Peak energy ratings: 0.05J - 2.5J• Low voltage range: 0 - 120VDC

• Applications: computers, handheld devices,industrial markets, automotive markets

SIDACtor® Devices• Suppresses overvoltage transients• Solid state crowbar devices• Protects telcom equipment during hazardous

transient conditions• Patented ion implant technology• Surge current ratings: up to 5,000A• Applications: telecom and datacom

Thyristors• Solid state switches• Very high impedance• Withstands rated blocking / off-state voltage

until triggered• Controls the flow of electrical currents• Applications: home appliances, electrical

tools, and outdoor equipment• Littelfuse Line of Thyristors: Sensitive Triacs,

Triacs, Quadrac® Devices, Alternistor Triacs,Sensitive SCRs, SCRs, Rectifiers, Dias,and Sidacs.

Gas Discharge Tubes (GDTs)• Styles: small foot print leaded and Surface

Mount configurations• Handles high current surges - up to 40,000A• Suppresses overvoltage transients• Low capacitance: 1 - 2pF• High insulation resistance: 1GΩ+• Low leakage• Applications: broadband cable, main

distribution frame, central office, and access

TVS Diodes and TVS Arrays• Suppresses overvoltage transients such as EFT,

inductive load switching and lighting• Peak pulse power: (10/1,000µs) ratings

from 400W - 15,000W• Reverse standoff voltages: 5V - 376V• Silicon-based circuit protection• Applications: computers, handheld, industrial

markets, telecom markets, automotive markets

PulseGuard® ESD Suppressors• Styles: Surface Mount (1,2, and 4 channel) and

connector array form factors• Capacitance value: 0.050pF• Protects high-speed digital I / O lines such as:

HDMI, DVI, USB 2.0, and IEEE 1394• Operates at speeds of 1Gb/s+• Protects against ESD transients per the IEC

61000-4-2 (level 4) test method• Lead-free and RoHS parts available

Littelfuse


Feature Product

The World’s LeadingProvider of CircuitProtection SolutionsOffering unmatched technical expertise and an industry leadingportfolio of circuit protection solutions.

Resettable PTC (Positive Temperature Coefficient) devices can protectthe circuit from an overcurrent event without requiring replacementthus allowing the end product to continue operation without interruptionof service. PTCs are ideal for use in applications where overcurrentcircuit protection is necessary but its location within the circuit is noteasily accessible to a user or technician.

Applications

PTC Selection Table

• Consumer electronics • Handheld devices

• Industrial equipment • Telecom / datacom applications

• Automotive applications • Computers

TVS Diodes and TVS Arrays• Suppresses overvoltage transients such as

EFT, inductive load switching and lighting• Peak pulse power: (10/1,000µs) ratings from

400W - 15,000W• Reverse standoff voltages: 5V - 376V• silicon-based circuit protection• Applications: computers, handheld, industrial

markets, telecom markets, automotive markets

Thyristors• Solid state switches• Very high impedance• Withstands rated blocking / off-state voltage

until triggered• Controls the flow of electrical currents• Applications: home appliances, electrical

tools, and outdoor equipment• Littelfuse Line of Thyristors: Sensitive Triacs,

Triacs, Quadrac® Devices, Alternistor Triacs,Sensitive SCRs, SCRs, Rectifiers, Dias, & Sidacs.

Fuses• Styles: Surface Mount, Axial, Glass, Ceramic,

Thin Film, Nano2®, Fast-Acting, Slo-blo®

• Current ranges: 0.010A - 35A• Maximum voltage ranges: 32V - 600V• Interrupting ratings from 35A - 200,000A• Lead-free and RoHS parts available

Murata


Murata Manufacturing Co. Ltd... the integrated electronic componentsmanufacturer. It’s rigorous design rules and extensive pre-releasetesting ensure total quality from day one. Known as the Innovator in Electronics for over 50 years, Murata is fullyRoHS compliant, ISO / TS certified around the world and ready tosupport the next generation of electronic equipment in the market.Murata’s product line-up includes Capacitors, Resistors / Thermistors,Coils / Delay Lines, EMI Suppression products, Resonators, PiezoSound Components, Microwave Filters and Modules, Sensors, OpticalProducts and Power Supplies.

Murata has the leading edge components for yourdemanding applications and makes sure youdesign-in high quality and technology.

Capacitors• Made of own superior ceramic materials • Meet the demand of a wide variety of

applications (Automotive, RF / Microwave)• Voltage ratings from under 3V to several

thousand volts• Based on own unique design and processing

technologies• Case sizes from ultra small 01005 to 2220• Trimmer Caps

Chip Inductors and Delay Lines• Product range includes a variety of coils; choke

coils, general-purpose and high-frequencychip coils

• Provide low-loss and high-Q characteristics at high frequencies

• Choose from monolithic, film or wire wound construction

• Wide range of inductance values and tolerances

Piezo Sound Components• Include piezo buzzers, sounders, diaphragms,

receivers and ringers • New mass production of extremely high quality

tweeters for use in high end audio systems• Commercialised Spherical Speakers and

Spherical Tweeters

EMI Suppression Components• Designed for use on signal lines and in power

supply & general electronic circuits • Product range includes ferrite beads, ferrite

cores, common mode chokes and a variety of other components to effectively suppress noise

• Full availability of technical support including design kits, application manuals and a comprehensive set of software tools to simulatevirtually any circuit condition

Hi-Caps• Capacitance value from 1µF up to 100µF • High performance replacement for tantalum

and electrolytic devices • Contributing to size and cost savings • Superior performance over other dielectric

materials• Case sizes from 0402 to 1210• 4 volt to 100 volt• No polarity

Sensors• Using own piezoelectric ceramics and magnetic

resistive elements • Detect heat, infrared, ultrasonic waves,

vibration, acceleration, angular velocity, angularrotation, magnetism and electrical fields

• Pyroelectric Infrared Sensors / Fresnel Lens• Piezoelectric Gyroscope "GYROSTAR"• Rotary Position Sensors

Thermistors / Potentiometers• Product range includes both PTC "Positor"

and NTC devices to detect overheating in electronic equipment, protect circuits, and compensate temperature

• Also on offer a broad range of trimmer potentiometers using both carbon and cermet materials

Resonators• Full range of small and thin ceramic resonators • High oscillation frequency and oscillation

tolerance • Own ceramic processing technology and own

unique piezoelectric material • Designed for use as a stable timing source for

microprocessors • Include SAW resonators for use at higher

frequencies

Murata


Filters• Complete range of cost effective band pass filters • Excellent selectivity, optimum stopband

attenuation, flat band pass characteristics and high stability

• World’s foremost manufacturer of ceramic filters • Superior quality and performance• Manufactured from the finest ceramic

materials on highly efficient, automated assembly equipment

RF & Microwave products• The RF & Microwave products include

antennas, RF diode switches, RF sub modules,dielectric filters, ceramic filters, dielectric resonators, high frequency coaxial connectors, isolators, chip multilayer hybrid baluns & couplers, and VCOs

Modules for Audio Visual equipment, Communication equipment and Bluetooth, Opto, LTCC,Power Supplies• Murata offers a wide variety of high technology special products as Bluetooth modules, hybrid modules, DC-DC converters,

power supplies, optical products, LTCC substrates and high voltage products

Get to knowMURATA BOYWhat is MURATA BOY made of?

Lumicera®

Bluetooth®

Module

UltrasonicSensor

* In addition to the components above, MURATA BOY features many of Murata’s electrical components such as “Chip Monolithic Ceramic Capacitor”, “Ceramic Resonator (CERALOCK®),“NTC Thermistor”, “Trimmer Potentiometer”, and “EMI Supression Filter (EMIFIL®)”

DC-DCConverter

GyroSensor

ShockSensor

Thin FlatSpeaker

Lithium IonRechargableBattery

Murata


Feature Product

EMIFILThe trend towards miniature multi functional devices operating at increasingly higher frequency brings with it the problem of noise suppression.Murata offers noise suppression products "EMIFIL" that are designed for use on signal lines and in power supply & general electronic circuits.

• Murata’s EMIFIL products range includes: ferrite beads, ferrite cores, common mode chokes and a variety of other components to effectively suppress noise. Murata offers technical support and guidance based on many years of experience operating in the field of noise suppression.

• Murata’s technical support includes: design kits, application manuals and a comprehensive set of software tools to simulate virtually any circuit condition.

Murata


Feature Product

CERALOCKMurata’s ceramic processing technology and unique piezo-electric material has led to the development of a range of small and thinceramic resonators "CERALOCK" that offer high oscillation frequency and remarkable oscillation tolerance. These products are designedfor use as a stable timing source for microprocessors. Murata also offer SAW resonators for use at higher frequencies to complete therange of frequency control products.

Surface Mount• 3mm ZD series• Low impedance CD series• High temp UB, UH series• Long life CB, CW series

Large Can• Standard 85C LG series• Standard 105C GG series• Long life 105C GX, GY series

Tantalum• Conformal coated• F95, F75, F73 series

Through Hole, Radial• High temp. BT, BW, BX series• Long life PX series• High ripple CS series• Low impedance HE series

Nichicon

The Nichicon Corporation was founded in Kyoto, in 1950. Since those early days Nichicon hasbecome a leading manufacturer and supplier ofelectrolytic capacitors supporting nearly 14% ofworld demand.

Nichicon has very large capacitor production resources in Japan andAsia. Nichicon also processes in house 90% of their aluminium foil,which secures the raw material, ensures quality and enablescontinuous product development. Nichicon has all ISO, QS and TSapprovals for all its 19 factories.

However, not intent with the status quo, Nichicon is always pushingthe limits of technology to provide new solutions for circuit design.The main themes of development are: miniaturisation, low ESR, highripple, longer life and higher temperature endurance. All Nichiconproducts are RoHS compliant and environmentally friendly designed.

Nichicon prides itself on its service. Its "Can do" attitude means that itputs customers first and always seeks to exceed expectations. If we"Can do" we will! It is this simple principle which has made Nichicon a strong player in the world capacitor market.

Nichicon provides local market support from sales offices in USA, Asiaand Europe. This is enhanced further by the close working relationshipwith TTI, whose worldwide coverage and expertise in passivecomponents offers a service which is hard to match.


Nichicon

www.ttieurope.com

Feature Product

EverCap Series• Double layer technology • Available in Radial, Snap In and Screw

Mount Type• Up to 4000F standard capacitance

Applications• Industrial• Solar power generation• Wind power generation

UE Series• Antivibration type• Life up to 5000h• Temp. range 125˚C

Applications• Automotive• Industrial

BX Series• High reliability• Temp. range 150˚C• Wide CV range

Applications• Automotive• Power supply

Polymer Series• Solid electrolyte technology• Very high ripple, low ESR• Available in SMD and THT

Applications• Automotive• IT sector

PX Series• Longest life assurance at +105˚C • Long life up to 20000h• High reliability • Low impedance

Applications• Automotive• Medical

High PerformanceCapacitorsNichicon is proud to present, from his extensive product range,certain High Performance Capacitors. Nichicon is continually pushingback the boundaries of technology as it has to be for a technologyleader in its industry.

For High Performance Capacitors Nichicon is able to offer varioussolutions for example with EDLC technology (EverCap) forCapacitance values up to 4000F - Anti Vibration type SMDCapacitors (UE and BC series) absorbing vibration up to 30G - hightemperature 150˚C devices in SMD (BC series) and THT (BX series)version - extremely high ripple current and very low ESR in PolymerCapacitor Type Technology (CF and LF series) - long life up to20000h @ 105˚C (PX series).

Page 26

Panasonic


Panasonic is one of the industry’s leading suppliersof standard and customised electronic components.With a wide product portfolio coupled with globalmanufacturing and sales capabilities, as well as thecommitment to customer service Panasonic meetstoday's market needs in terms of design support,single sourcing and global presence.

Through continuous improvement in its worldwide production sites,Panasonic is able to manufacture billions of resistors on the highestlevel of quality. Furthermore Panasonic invests a lot in research anddevelopment to achieve or exceed the market requirements.

One of the major ways in which Panasonic Industrial Europe supportsbusinesses is by providing equipment for manufacturing facilities.

Our comprehensive lineup ranges from devices as small as the tip of afinger to equipment for entire factories. We are ready to help yourcompany’s business integrating our technology with yours atproduction sites worldwide to create hit products for the 21st century.

Panasonic Industrial Europe gives our customers the convenience tosource a great majority of their components, peripherals, automationequipment, industrial batteries and much more from a single supplierand thereby easing the procurement process.

SMD Power Choke Coils• Wide range of inductance values up to 1mH• Low DC resistance and large current capability• Minimised case sizes available by adhesive

shield technology• Shock resistance series available• RoHS compliant• Saturation currents up to 50A• High peak currents without saturation• Low AC resistance over 500kHz

MELF REPLACEMENT by SMDAnti-Surge Resistors• High power ratings• Low surface temperature rise• High pulse resistance• High ESD resistance• Excellent long term reliability

Snap In Capacitors TS-EE Series• Combine very high ripple current capability

with small size• Working voltage ratings of 200V, 250V, 400V

and 450V• Capacitance value from 56uF to 1800uF• Guaranteed life 3000 hours at 105°C with

maximum rated ripple• Sizes range from 22mm x 25mm to 35mm x 50mm• 2-pin and 3-pin terminal

Speciality Polymer CapacitorsThe SP-Cap from Panasonic is a SMD Aluminiumelectrolytic capacitor that uses a conductivepolymer as its electrolyte. SP-Caps are primarilyused as input and output capacitors for DC/DCconverters, due to their ultra low ESR values.• Wide CV range starting from 2V up to 16V with

capacitance values from 2.2uF up to 560uF • Very stable electrical performance against DC

Bias, frequency and temperature • 125°C series is available• No voltage derating required for SP-Caps,

unlike Tantalum caps• High reliability against short circuit compared

with tantalum capacitors• Extremely good ripple current capability

(up to 4.2 Arms @ 100kHz)• High temperature types for lead free soldering

are available• RoHS compliant range

Chip Inductors (0201 - 1812)• Ultra small Chip Inductor series (0201, 0402

case size)• High Q-factor series• High power types for high current loads• Wide inductance range (1nH up to 1mH)• High SRF series• RoHS compliant• Excellent for high frequency applications

Square Reflow Light Touch SwitchType EVQQ2• Compact and thin design: 6.5 mm x 6.0 mm,

1.8 mm high• Added an overstroke type: operating stroke:

0.35 mm• A wide variety of operating forces: operating

forces: 0.5 N to 5.0 N

Choke Coils• High inductance values up to 10mH• Low leakage magnetic flux• High current capability• Perfectly suited for switching power supply• RoHS compliant

Thin Film Chip Resistors - highreliability type E96 • High-reliability under hard environmental

conditions (all series)• Guaranteed for a loading life of 1000h at

85°C, 85% relative humidity• Operating temperature range: -55°C to +155°C

• High precision and low T.C.R. (Temperature coefficient of resistance)• Resistance tolerance: 0.1%, 0.5%• T.C.R.: +/-25 x 10-6/°C, +/-50 x 10-6/˚C

• Wide Resistance Range• 0603 size: 10O to 330kOhm• 0805 size: 10O to 1MOhm

• Low current noise, excellent non-linearity• Reference Standards: IEC 60115-8; JIS C

5201-8; EIAJ RC-2133A• Corresponding to AEC-Q200

Panasonic


Feature Product

Electric DoubleLayer CapacitorsPanasonic Electric Double Layer Capacitors (GoldCapacitors) were developed by the CentralResearch Laboratory of Panasonic in 1972, then,introduced to the market on a commercial basis in1978. As these capacitors perform like a batterythey are ideally suited for applications requiring a secondary power source such as backup energyfor microprocessors (real time clock etc.) andenergy storage for chargers or solar batteries.

Panasonic Gold Capacitors are the ideal replacement of a secondarybattery. Their main advantages against a battery are:

• Quick charge and discharge available• No charge and discharge cycle limitation• Green product (RoHS compliant, no hazardous substances

used, like lead or cadmium)• No recycle restriction • No charging protection circuit needed, easy circuit design• Maintenance Free and a very long life

Panasonic Gold Capacitors are available up to 5.5 Volt and up to 70Farads. There are three different packages (coin, stacked coin, radialleaded) available, design depends on backup current and solderingconditions (flow / reflow). For higher ambient temperatureapplications Panasonic offers an 85°C product.

Applications

Replacing a battery, for example in:

• Real time clocks• Solar applications• Toys• Metering equipment (Water, Gas, Electricity)• Memory backups• Cash register systems• Control units• Measurement equipment• Bicycle lamps

SMD Gold Capacitor EP Series For Reflow Soldering Panasonic introduced thefirst SMD Gold Capacitor in 2002. The latest product with this technology isPanasonics new EP series. This EP series is theworld smallest Electric Double Layer Capacitor.The size code is 311, which means 3.8 mm diawith a height of just 1.1 mm (excluding terminals).In comparison to the current EN (size code 614)series this is a volume reduction of approx. 70%!

Due to this size the product is suitable for allsmall mobile devices, e.g. mobile phones, keylessentry systems, thermocontrol units or PDA's. Withmore and more advanced functions, thesedevices require backup solutions for memorybackup and clock function.

Spectrum Control


Spectrum Control, Inc. is established as one of theworld’s leading manufacturers and total solutionsproviders in the suppression or elimination ofelectromagnetic interference.

Since 1968 SCI’s EMI filters have been an integral part in a vastrange of applications including military secure communications,aerospace, missiles, rockets, military and commercial avionics,telecommunications, industrial controls, and medical equipment.

SF Series - Three Terminal Chips• Standard EIA chip sizes from 0603 to 1806• Excellent performance in high current

applications• Non-polar, surface mountable• Capacitance range of 22pF to 220,000pF• Rated voltage up to 100VDC• Current rating up to 2A• Applications: cellular telephones, base

stations, telecom equipment, industrial electronic interface, programmable controllers, electronic automotive equipment, computer and peripheral equipment

SA Series - SM Filter Arrays• Structure minimises residual inductance with

a high self resonant frequency ensuring largeinsertion loss in a wide band

• Designed to control cross talk• Solder plated nickel barrier terminations• 25VDC to 50VDC, 0.3A, IR 10,000MΩ Min,

DCR 0.3Ω Max, -55°C to +125°C, 22pFto 22,000pF

• Applications: noise reduction for DC lines andcomputers, computer peripheral equipment,digital TV and VTR, cellular telephones,automotive electronics

LC Chips• Ideally suited for high frequency signal lines• Steep IL characteristics• Cut-off frequency ranges of 10MHz to 220MHz• 25V, 100mA, 10MΩ, -40°C to +85°C• Applications: telecommunication equipment,

fax, modem, and ADSL, computer andperipheral equipment, digital AV equipment,TV, VCR, and DVD, digital circuit equipmentnoise countermeasure

MSM Series - Miniature Surface Mount Filters• Miniature footprint (0.078” x 0.049”)• 50VDC, 10A, 47pF to 1,000F, Ft circuit• Superior solderability and heat resistance

due to multi-layer electrode construction• Tape & reel or bulk packaging• Applications: automotive electronics,

computer and peripheral equipment, microwavetransmissions, test equipment, DC power supply lines and medical equipment

SSM Series Square Surface MountFilters• Square mechanical geometry enhances

soldering to PCB• Compact footprint for densely populated PCBs• 100VDC, 10A, 100pF to 4,000pF, Pi circuit• Tape & reel or bulk packaging• Applications: power amplifiers, power supplies,

temperature and motor controls, high current buslines and driver circuits and medical equipment

High Frequency PCB Filters• Easy installation - mounts directly to PCB

without bracket or plate and begins filteringat the source of the problem

• Encapsulated for environmental protection• 50 VDC, 10A, 800pF, -25°C to +85°C• Applications: low power digital circuits,

FCC and VDE compliant equipment

Filtered Connectors• Filtered D-Sub connectors with ferrites,

multilayer capacitors or tubes• Wide range of capacitance values and insertion

loss range• Temperature ranges from -55°C to +125 °C;• Pin and socket contact, broad range of

contact layouts• High-density series available• Filtered combo connectors for filtering of signal,

power and coaxial contacts with high performance coaxial feed-thru capacitors for 48 V DC

• Communication interfaces - RJ45, USB • Filtered circular connectors• Applications: personal computers, peripheral

equipment, industrial equipment, cellular base stations, medical electronics, switching and transmission equipment, secure-communications,aerospace applications

PSM Series - Power Surface MountFilters• Optimum cost savings compared to

Through Hole filters• Current ratings up to 20A in Ft circuit,

10A for Pi circuit• 200VDC; 125VAC• Capacitance range from 68pF to 10,000pF• Tape & reel or bulk packaging• Applications: power amplifiers, power

supplies, temperature and motor controls, high current bus-lines and driver circuits and medical equipment

Spectrum Control


Feature Product

Filter Expertise toBoard LevelComponentsSpectrum Control, Inc. has extended their filter expertise toboard level components with the introduction of a complete lineof Surface Mount EMI filters. Our family of surface mount filtersoffer high performance filtering with minimal PCB footprint.

Applications

• Telecommunication

• Amplifiers

• Motor Controls

• Microwave

• Attenuators

• Oscillators

• Industrial control

• Medical equipment

• Rocket ignitors

• Aerospace

• Military avionics and secure communications

Resin Sealed Bolt-In Filters• Wide range of sizes: 4 - 40 thread through 5 / 16-24• UL / CSA and MIL-F-15733 approved filters• Current ratings up to 100A• Voltage ratings up to 1250VDC / 240VAC (400Hz)• Custom lead options available: hooked, turret,

flattened, notch. Various lead lengths available• Multiple circuit configurations - C, L, Pi• Many off-the-shelf distributor items• Provides excellent environmental protection

with rugged case and resin seals at both ends

Miniature Solder-In, Press-In, andSpec Spin Filters• Miniature size• Capacitance values from 5pF to .030µF• Voltage ratings to 200VDC / 115VAC 0-400 Hz• Gold plating compatible with gold bonding

techniques• High temperature construction• Available in Mil-C-11015 versions• Ideal for microwave and RF applications

Solder-In Filters• Small size options• Multiple circuit configurations C, L, Pi• Voltage ratings to 750VDC• High temperature construction• MIL-F-15733 QPL versions available• Custom lead options available: hooked, turret,

flattened, notched• Many lead length options offered• Ideal for filtering signal / data lines and DC

power lines

Hermetically Sealed Bolt-In Filters• Popular 0.375 / 0.410” and 0.690” case diametres• Voltage ratings from 50VDC to 400VDC / 240VAC• Filter configurations available in C, L, Pi, T

and double T• Largest selection of MIL-F-15733, MIL-F-28861

Mil-PRF-28861 and DSCC 84084 filters• Provides broadband high performance from

10KHz to over 10GHz• Excellent for critical applications demanding

high reliability in harsh environments

RoHS Compliant Product Readily Available

Syfer


Syfer Technology is the premier global source forapplication specific ceramic multilayer capacitorsand EMI Suppression filters. Syfer manufactures highvoltage, safety, surge protection and FlexiCapTM capacitors as well as3 terminal EMI, Pi & X2Y Filters. Syfer's unique wet processproduction gives unrivalled quality and reliability with approval to ISO9001:2000 and ISO 14001 coupled with product approvals to CECC,TÜV, UL and AEC Q200.

High Voltage Ceramic Capacitors• Chip capacitors up to 6kV • Sizes up to 8060, with wide capacitance

ranges available• Tip & Ring / Ring Detect, 250Vdc rated

Safety Capacitors - Class X & Y• Class X1, Y2, X2 • Approved by TÜV and UL• Approved & Certified to EN132400, IEC

60384-14 and UL 1414• Size 2220. Capacitance values from 150pF to 10nF

Surge Protection Capacitors• Class X1, Y2, X2, Y3 • Approved by TÜV and UL BS CECC 30 601-008• For use in equipment certified to meet IEC

60950• Sizes 1808, 2211 & 2215

Miniature panel mount ‘T’ Filters• For use where panel space is at a premium• Pitching as close as 4.6mm• Capacitance up to 47nF and voltages up to 500Vdc• Utilise 2 ferrite inductors and 1 discoidal

capacitor per filter

Application Specific Capacitors• 150ºC X8R capacitors• Low profile• Tight tolerances available

CECC Approved Chip Capacitors• Approval to CECC 32101-801• Case sizes 0805 - 2225• Voltages from 50V to 200V• CECC approved Radial Leaded types also

available to BS CECC 30 601-008

FlexiCapTM Capacitors with Flexible Terminations• The original polymer termination capacitor• Reduces mechanical cracking• Withstands almost twice the amount of

board bend• For aerospace, automotive and other applications

Surface Mount EMI Pi-Filters• 1A, 5A & 10A versions available• 1206, 1812 and 2220 sizes• Capacitance values up to 470nF• Working voltages up to 500Vdc• Tape and reeled for standard pick-and-place

3 Terminal EMI Chips & X2Y BalancedLine EMI Chips• 3 terminal EMI chips in sizes from 0603 to 1806 • High current (2A) versions available• X2Y Balanced Line EMI Chips also available

Large Case Size Capacitors• Syfer is committed to supporting large case

size requirements• From typically 1206 to 2225, but up to a

maximum of 8060• Low and high voltage versions available

EMI Filter Design Kits

• Comprehensive kit containing 45 product types

• 22pF to 470nF, 300mA to 10A and up to 500Vdc rated

• 3 terminal EMI chips in 0805 and 1206 sizes

• High current, 3 terminal EMI chips in 0805, 1206 and 1806 sizes

• X2Y balanced line EMI chips in 0805, 1206, 1410 and 1812 sizes

• 1A, 5A and 10A Surface Mount pi-filters

Syfer


Feature Product

High PerformanceCapacitorsMultilayer ceramic chip capacitors are renowned for theirreliability but can be vulnerable to cracks when affected byPCB flexing. The resulting damage may not manifest itselfimmediately, but may ultimately result in field failure. SyferTechnology has introduced a polymer termination to its rangeof Multilayer Capacitors to permit greater degrees of boardbending without damage to capacitors.

Cracking problems?The multilayer ceramic chip capacitor is the capacitor of choice for surface mountapplications and is one of the most reliable components for surface mountapplications. However, it can fail due to fracture as a result of PCB bending. Over time, moisture penetration into the crack can cause a reduction in insulationresistance and eventual dielectric breakdown leading to capacitor failure inservice. The bending may be caused by a number of factors, including theinsertion of connectors or other components, poor storage, automatic testing orduring depanelisation. Stress can also be exerted due to differential expansionwhen the board is temperature cycled. Land designs and the position of thecapacitor on the board are also factors that the user needs to take into account.Stress fractures may not always be evident during the board assembly process.Sometimes it may be the end customer who finds out - when the equipment fails!

FlexiCapTM the solutionFlexiCapTM has been developed as a result of listening to customers’ experiencesof stress damage to MLCCs from many manufacturers, often caused byvariations in the customers’ production processes. Our answer is a proprietary flexible epoxy polymer termination material, that isapplied to the device under the usual nickel barrier finish. FlexiCapTM willaccommodate a greater degree of board bending than conventional capacitorsand hence reduce the incidence of cracking.The benefit to the user is to facilitate a wider process window, giving a greatersafety margin and substantially reducing the typical root causes of mechanicalstress cracking. FlexiCapTM may be soldered using conventional wave or reflowsolder techniques and needs no adjustment to equipment or current processes.Extensive reliability testing has confirmed that the polymer has no negative effecton electrical or environmental performance and electrical parametersindistinguishable from conventional parts.

• Telecoms • Power supplies • Automotive • Aerospace • and many more

Features

Applications

Benefits

• A silver-loaded epoxy polymer termination

• Standard tin finish over nickel barrier

• Flexible, to reduce the stress between the PCB and the ceramic capacitor

• Electrical parameters indistinguishable fromconventional parts

• Extensive reliability testing has confirmed that the polymer has no negative effect on electricalenvironmental performance

• Reduced cracking

• Board can bend almost twice as far

• Better production yields resulting in cost reductions

• No change to existing assembly process

• Possibility to design-in larger chip sizes

• Facilitates a wider process window

• FlexiCapTM available for all standard X7R capacitors

TDK


TDK’s greatest strength lies in the fact that it hasestablished its own core technologies.

TDK’s core technologies are materials technology, process technology,and evaluation and simulation technology. Materials technology can betermed the starting point for everything that TDK does. The varioustechnologies derived from the company’s development of ferrite haveyielded a rich array of products that meet the demand for smaller,thinner, more lightweight electronic devices. TDK’s process technologyis used to process these materials, and to maximise their performanceby controlling their characteristics at the nano level. The result is awide array of capacitors, inductors, circuit protection products, powerproducts, and sensors and actuators.

Power Line Wound Inductors (SLF)• Low DC resistance and high current capacity• Magnetically shielded for low noise within

hi-density applications• Flat bottom for ease of manufacturing and

increased reliability• Applications: computers, disk drives, networking

equipment, DC-DC converters, communications,cellular, industrial controls, and automation

Common-mode Filters for PowerLine (ACM)• Common-mode impedance surpasses 300 to

1000Watt 100MHz. Noise is greatly suppressed. • Capable of handling the highest current

(up to 10A)• Compact and light-weight choke coil. • Contains no lead and also supports lead-free

soldering• Applications: radiation noise control for DC

power lines; for portable applications, ISDN, LAN, CD / DVD-Rom, LCD panel, etc

High Capacitance BME-MLCC• Capacitance ranges from 1000pF to 100µF• Available in 1608, 2012, 3216, 3225 metric

case sizes• Excellent frequency characteristics, ESL,

and ESR• Available from 6.3VDC to 50VDC at various

temperature ranges• Applications: computers, communication

equipment, cell phones, gaming equipment, and LCD panels

Clamp Filters (ZCAT)• Unique case for ease of installations - no post

molding required• Built in strain relief prevents slippage on cable• Ferrite core provides excellent absorption

of Hi-frequency EMC• Large core size prevents saturation during

large signal surges• Applications: computers, monitors, disk

drives, telephones, A / V equipment, games,musical instruments

Hi-Frequency Multilayer CeramicInductors (MLG)• Inductance values from 1 to 390nH

Available in 0603, 1005, and 1608 metriccase sizes

• Advanced monolithic multilayer structure• High Q characteristic• Suitable for high frequency applications• Communications equipment, cellular, networking

Common-mode Filters for SignalLine (ACM)• Size variation: 4 types of case sizes are

available from 11.0x9.4mm to 2.5x2.0mm • Multi lines: 3 lines are prepared to correspond

to the various application• It can suppress the common-mode EMI without

waveform distortion • Applications: for portable applications, ISDN,

LAN, CD / DVD-Rom, LCD panel, etc.; also suited for differential signal lines, such as USB and IEEE 1394 interface

Common-mode Filters (SMD) forCAN-BUS (ZJYS Series, ZJYS51, ZJYS81 Types)

• Can reduce both common-mode noise anddifferential-mode noise

• Operating temperature range covers from-40°C to +125°C

• Contains no lead and also supports lead-free soldering

• Applications: radiation noise control for DC power lines, interface lines, CAN-BUS system

Signal Line Wound Inductors (NLV)• Metal terminals for excellent connection reliability• Exterior package of high heat resistant

thermoplastic resin• NLV25 Series available in 0.01µH to 100µH• NLV32 Series available in 0.01µH to 470µH• Applications: A / V equipment, VCRs, TVs,

cameras, communication equipment, mobile base stations, xDSL

Multilayer Chip Varistors (AVR)• Superior ESD suppression performance• Available in 0603, 1005, 1608, and 2012 metric

case sizes• Less than half the board space of Zener diodes• Higher breakdown voltage than Zener diodes• Select case sizes with capacitance as low as

1.1pF• Protection for USB1.1/2.0, IEEE1394, HDMI,

CANBUS• Applications: computers, industrial measuring

and testing equipment

TDK


Feature Product

TDK MMZ SeriesSMD Ferrite BeadsAs IC clock speeds increase, there is a greatertendency for high frequency noise to occur, andnoise countermeasures become more difficult toimplement. In addition, the enhanced functionsand high degree of integration of electroniccomponents has exacerbated the noise problem.

As an expert on noise countermeasures, TDK offers total EMC

solutions and has won considerable praise in the industry. TDK’s

MMZ ferrite beads are electromagnetic compatibility (EMC) solutions

that are designed for use on signal lines and in power supply &

general electronic circuits. To address a wide array of applications,

the MMZ series is available in five standard metric case sizes 0402,

0603, 1005, 1608, and 2012.

The beads come in four different materials to address a wide range

of impedance levels from 40MHz up to the GHz range. MMZ Beads

are magnetically shielded to reduce crosstalk and allow for high

density placement. The low DC Resistance structure of the electrode

helps to reduce power consumption. The MMZ Series is available on

tape and reel for use by automatic assembly equipment. The beads

are non-polarised for ease of placement and suitable for reflow

soldering methods. The MMZ Series contains no lead and is

completely RoHS compatible.

Features & Benefits Applications

• Standard metric case sizes: 0402, 0603, 1005, 1608, & 2012

• Magnetically shielded to eliminate crosstalk

• EMI Suppression in the GHz range

• Four material types to manage wide range of impedance

• Low DC resistance prevents power consumption

• Lead free and RoHS compatible

• AV equipment

• Desktop & notebook computers

• Telecom equipment

• Mobile communications

• Electronic toys & games

• Power supplies

• Appliances

• Automotive

• Industrial measuring & testing equipment

TT electronics


TT electronics plc is a world leader in componenttechnologies, providing both application-specificresistive and microelectronic hybrid technologysolutions to the world's leading companies.

With manufacturing locations in the UK, USA and China, TTcompanies BI Technologies, IRC and Welwyn Componentsspecialise in the development of new products and processesacross thick and thin film, metal oxide, wirewound, metal filmand circuit interconnect technologies.

Extensive approvals are held from major automotive, militaryand telecommunications companies worldwide includingTS16949:2002, CECC, ISO9000 and BSEN ISO9001:2000.

Wirewound Resistors• Vitreous enamel to CECC 40201-002• Cement coated: low cost and flameproof• Aluminium housed to CECC 40203-006• Low Ohmic down to 5mOhms• Moulded failsafe• Open air low Ohmic, high current• Tubular: vitreous and cement versions

Specialist Chip Resistors • Approved to CECC 40401-003, 004 &008• Resistance up to 50GOhms and down to

3mOhms• Rated up to 3W, Voltage to 3kV• High reliability tantalum nitride film for maximum

protection, also available in military versions• Military screening available

Precision / Ultra Precision Resistors• Metal film 15ppm, 0.1%• Ultra precision metal film with tolerances

down to 5ppm, 0.01%• Moulded ultra precision with rugged

protection, 2ppm • Custom matched sets• Bulk metal film, 5ppm, low inductance low noise

High Voltage / High Value Resistors• Precision high voltage up to 50GOhm, 100kV• High resistance up to 150GOhm• Ultra high resistance up to 100TOhm• Planar / planar divider types available with

full custom design service

Resistor Networks• Silicon networks in QSOP• Ceramic or silicon networks in SOIC• High frequency networks• T filter networks• RC networks to IEEE1284 and line

termination networks• Precision networks to 0.1% tolerance

Pulse Chip Resistors• High pulse capability for telecomms & power

supply applications• Field proven with millions of units in use• Standard & Custom Chip Sizes (0805 to 2512)• Thick film technology putting protection where

its needed

Current Sense• High precision, low value axial & chip resistive

technologies• High power, 2 and 4 terminal current shunts• Custom design service• Open air, wire bondable, thick film precision &

metal glaze (up to 2W) versions• TCRs to ± 20 ppm / °C

Power• Resistance 0.01R to 100M• Rated up to 7kW• Extreme operating temperature to +155°C• Ultra low profile dynamic braking resistors• Popular TO style packages

Trimming Potentiometers• Single turn• Multi turn• Surface mount• Through hole• Sealed

Fusible Resistors • Wirewound, metal film, carbon film and

nickel film• Full fusing characteristics available

TT electronics - BI Technologies

www.ttieurope.com

Feature Product

SMP SeriesSurface Mount Power Resistor

TT electronics BI Technologies has developeda Surface Mount Power Resistor with the highestpower rating currently available.

The SMP series is unique in its ability to offerdesigners of high power applications a resistorwith a power capability of up to 10W.

Designed for use in high power applications in confinedspaces, the SMP series boasts a small footprint and mouldedSOIC package that offers superior thermal management. Thepower resistor boasts extremely low thermal resistances ineach axis to achieve maximum heat dissipation.

By conducting heat from the resistive element through lowthermal impedance metallic pathways to the packagesurfaces, the board efficiently channels heat away from theresistor to the ambient. This allows designers to create aproduct that can operate at higher output power levels, shortterm overloads & pulse durabilities without the normalthermal problems.


• High frequency emitter resistors in switchingpower supplies

• High precision CRT colour video amplifiers

• High frequency snubber and pulse handling circuits

• Pulse generator load resistors

• In-rush current protection

• Bleeder resistors

• Tolerances of +/-1% and +/-5%

• Operating temperature range of -55°C to 155°C

• Resistance range up to 10k

• Excellent heat dissipation qualities

• Enhanced power handling capabilities

• Increased protection from the threat of commonoverheating problems

Page 36

TT electronics - IRC

www.ttieurope.com

Feature Products

Surface Mount OpenAir ResistorTT electronics IRC has developed a wider versionof their open air current sense resistor with ahigher power rating than conventional metalelement resistive devices to provide automotivedesign engineers with a power current sensesurface mount resistor with enhanced thermalcharacteristics.

Designated the OARS-XP Series, the resistor features awider metal alloy resistive element that offers exceptionalTCR ratings and superior thermal compliance.

Features & Benefits

• Resistance value 2mΩ to 50mΩ• Standard tolerances of ±1% and ±5%• Inductance values less than 10 nanohenries• Operating temperature from -40°C to +125°C

High TemperatureChip ResistorsTT electronics IRC provides design engineers witha resistor suitable for extremely high operatingtemperatures, a series of tantalum nitride chipresistors rated for operation at 200°C.

Designated the PFC-HT Series, the chip resistors utiliseIRC's proprietary TaNFilm® self-passivating resistive elementtechnology, and feature a wrapround non-leachingtermination style, with either gold-plated or 100% tin(lead free) versions designed to enable the devices tooperate at elevated temperatures.

Features & Benefits

• Available in industry standard 0603, 0805 and1206 chip sizes

• Voltage and power ratings of 33.3V / 62.5mW, 50V / 100mW and 100V / 125mW

• Resistance range from 10Ohm to 85KOhm• Tolerances to ±1%• Absolute TCRs from ±25ppm/°C• Operating temperature range from -55°C to +200°C

Page 37

TT electronics - Welwyn

www.ttieurope.com

Feature Product

ULR SeriesLowest Ohmic Value ResistorMinimises Power ConsumptionThe latest offering from TT electronics WelwynComponents, in response to demand for moreenergy efficient products, is the ULR Series, itslowest ohmic value resistor to minimise powerconsumption.

Designed for current sensing in power electronicsystems, resistors in the ULR series are available in1W to 3W power ratings, with a wide ohmic rangestarting from as low as 500 microhms, allowing formeasurement of currents up to approximately 75A.

Products in the economical, low-inductance ULR seriesare surface mounted to maximise board space, makingthem well-suited to the industry trend for smallerproducts and are ideal for power supplies, DC-DCconverters and miniature electric motor control devices.

The newly launched series boasts high overload andpulse performance due to its bulk metal construction,making it an ideal choice for power supply applicationswith high inrush currents and motor drive applicationswith high momentary fault currents.

The ULR is ultra low profile with most values below1mm high, its compact 2512 footprint make it ideal forhigh-density designs. The ULR series’ construction isnon-moulded in two variants distinguished by colour.


• Ohmic values as low as 500 microhms

• High precision current measurement -tolerances of 1% and a temperature coefficient of 50ppm/˚C

• High overload and pulse performance

• Ultra low profile

• Compact footprint

• Industrial (e.g. battery cell, process control)

• Automotive (e.g. motor control, lamp monitor)

• Power supply (e.g. output protection, DC-DC converter)

• Consumer (e.g. battery protection)

The black type is a simple flat chip shape suitable forwave as well as IR reflow, the higher rated greentype resistors also feature a PCB clearance gap tomaximise thermal performance. The low ohmicvalues of the series permits low powers loss in highefficiency PSU design, making the ULR series anenergy efficient choice.

Featuring an ambient temperature range of -55˚C to170˚C, the series is suitable for extreme operatingenvironments such as industrial or automotive use.In addition it boasts a low temperature coefficient of50ppm/˚C, essential for those involved in constructingdevices and circuits for the detection of currents.

Page 38

Tyco Electronics


The range of precision resistors meets the requirement for economicallypriced components for both industrial and military applications.Tolerances down to 0.01% and TCRs as low as 5ppm, the range fromTyco Electronics delivers the “Complete Precision Portfolio”.

Noise suppression and protection inductor chips from Tyco Electronicscan help protect circuits in a variety of ways. The range offers solutionsfor high power and high speed applications.

For all trimming solutions, Tyco Electronics is the ideal design partnerwhere your circuit requires calibration or precision setting.

Tyco Electronics’ high power and high voltage resistors can offer up to1000W with voltage proof to 50kV. High power and pulse resistors arecapable of withstanding pulses up to 25,000 Watts for applications suchas regenerative braking and power supplies, these are available in awide variety of package styles with customisation our speciality.

Precision / Ultra Precision ResistorsRN73 series• Temperature coefficient of resistance (TCR) values down to 5ppm/°C• Resistor tolerances to 0.01%• RN73 0402 (10ppm 0.1%) values from 10R to 270K• RN73 0603 (10ppm 0.1%) values from 4R7 to 332K in the E96 grid• RN73 0805 (10ppm 0.1%) values from 4R7 to 500K in the E96 grid• RN73 1206 value range can go from 4R7 to 1M0 and that we can offer 2010 and 2512 case size as well• The RN73 series in case sizes 0603, 0805 and 1206 are also available with Increased Power ratings• Wide range of pack quantities (250 piece cut strip, 1000 piece reels, 5000 piece reels, 10000 piece reels)• Thin Film resistors with higher tolerances and TCRs are available as the CPF Series

Carbon Economy TrimmersType CB15 series & Type CB10 series• Low Cost • Robust enclosed construction• Spindle adjust versions • Flame retardant• Arrow position indicator • Top, bottom and side adjust styles• Stable in high humidity • Edgewheel operation style

High Frequency Chip Inductor3650 series• Wide range of inductance values from 1.0nH up to 4.7mH• Demanding high frequency applications• Ideal choice for filtering and signal conditioning in cellular phones, global positioning systems (GPS),

digital TV tuners, cordless telephones, W-LAN and Bluetooth applications• Four package sizes: 0402, 0603, 0805, 1008• Designed for automatic placement• Wire wound construction and standard tolerances of 2, 5 and 10%• High self resonant frequency realises a high Q factor and stable inductance at high frequency• Smooth casings of the devices facilitate accurate placement• A low-DC-resistance design of the devices provides low loss, high output and low power consumption• Operating temperature range from -40 up to +125°C• RoHS compliant• Available in quantities of either 1000 or 5000 piece reels• Laboratory design kits are available

Tyco Electronics’ product portfolio now includes a comprehensive range of passive components.

Specific areas of focus are in Precision Resistors,High Frequency Inductors and Carbon Trimmers.

Tyco Electronics


Feature Product

Customisation & DevelopmentProgramme

As a leading manufacturer of resistive products,Tyco Electronics serves a wide range of sectors withboth standard and custom-designed solutions. Coremarkets include industrial machinery, transportation,electrical appliances and commercial.

Manufacturing processes include thick film, thin film, wire-wound andfoil technology. These core processes can be adapted to achievesolutions specific to a customers design requirements. Our capabilityincludes bespoke product developments and product modifications.The experienced design team works closely with our customers'engineering personnel to design advanced products meeting theirexact requirements. We also offer 3D visualisation of the product soour customers’ engineers have an understanding of what the productwill look like from the start of the project.

The customisation and development programme includes in-houseproduct testing in our own R & D laboratory. Tests can be designed inconjunction with customer specifications to include cyclic rated powerand overload testing, adiabatic (single shot and frequency) testing,environmental, mechanical and repetitive pulse testing. Qualificationtesting is carried out to a proven procedure and the productdevelopment stages are well documented and approved by a designapproval team.


Bespoke Solution• Can be treated as a component not an assembly• Engineered from a specification to completion• We turn your specification into a drop-in solution

Complete Flexibility• A wide range of resistors, heatsinks, terminal

posts, fixings, wiring harnesses and connectors to suit every application

Convection or Water Cooling• Designed to meet your performance and

cost requirements

Reduce Cabinet Temperature for End-User• Increases component life and system reliability

• Rail

• Marine

• Power Transmission and Distribution

• Electrical Machinery

• Crowbar

• Filter

• Braking

• Capacitor Charging and Discharging

Tyco Electronics / Raychem Circuit Protection Products


Raychem Circuit Protection products are a part ofyour everyday life...From your cell phone battery to your car’s steering they help to makeyour world safer and your electronics more reliable. The companydevelops, manufactures, and markets a complete line of overcurrent,integrated, and overvoltage circuit protection products. All products are available in RoHS compliant.

PolySwitchTM Devices• Surface Mount, Radial Leaded, Axial Strap • Hold currents ranging from 0.05 to 15 Amps• Voltage ratings from 6V to 240V• Range includes, Radial Leaded devices,

Surface Mount devices SMD, miniSMDTM, microSMDTM and nanoSMDTM families (1206, 1210, 1812, 2018, 2920 and 3245 sizes), Protection against short duration, high voltage faults (250V - 600V)

Telecom Fuses• High density placement in multi-port systems• Telcordia GR-1089, TIA-968A and UL60950

Fast Acting Fuses• Highest hold current / smallest footprint• Monolithic, Multilayer Surface Mount package• -55˚C to 125˚C operating temperature

Slow Blow Fuses• High current ratings / small footprint• Monolithic, Multilayer Surface Mount package• -55˚C to 125˚C operating temperature

ESD Protection Devices• Thick film technology• Low capacitance (0.25 pF typical)• Low leakage current • Low trigger voltage• Low clamping voltage• Fast response time (< 1ns)• Capable of withstanding numerous ESD strikes• Compatible with standard reflow installation

procedures• Bi-directional protection

PolyZenTM Micro-Assemblies• Overvoltage transient suppression• Stable VZ vs fault current• Time delayed, overvoltage trip• Time delayed, reverse bias trip• Power handling on the order of 100 watt• Integrated device construction

Gas Discharge Tubes• Crowbar device with low arc-voltage• Low capacitance and insertion loss• High accuracy sparkover voltages for high

precision designs• Wide range of voltages and form factors• Many devices tested per ITU K.12 recommendations• Optional fail-short mechanism• Various lead configurations• Non radioactive materials

ROV Metal Oxide Varistors• Various diameter sizes: 5mm, 7mm, 10mm,

14mm, 20mm• Broad varistor voltage range: 18V - 1800V• Various surge capabilities: standard, high

surge, extra high surge• High current handling and energy

absorption capability• Fast response time• Low leakage current• Various lead types: straight, kinked, other

special lead types

SiBarTM Thyristors• Bidirectional crowbar transient voltage protection• High off-state impedance• Low on-state voltage• High surge capability• Short-circuit failure mode• Surface Mount technology

2ProTM Devices• Single overcurrent, overvoltage and ESD

protection device• Resettable overcurrent protection• UL 497A listed protector (#E258475)

Tyco Electronics / Raychem Circuit Protection Products


Feature Product

PolyZen MicroAssemblyTyco Electronics has introduced its Raychem Circuit ProtectionPolyZen polymer enhanced, precision Zener diode micro-assembly.Designed to meet the growing need for overcurrent and overvoltageprotection on portable equipment that utilises barrel jacks for DCpower input, the PolyZen device helps protect sensitive electronicsfrom damage caused by inductive voltage spikes, voltagetransients, incorrect power supplies and reverse bias.

The new PolyZen device helps provide coordinated protection with acomponent that protects like a Zener diode, but is capable ofwithstanding very high power fault conditions. The PolyZen micro-assembly incorporates a stable Zener diode for precise voltageclamping and a resistively non-linear, polymer positive temperaturecoefficient (PPTC) layer that responds to either diode heating orovercurrent events by transitioning from a low to high resistance state.

The RoHS-compliant device offers power handling on an order of 100watts in a 4mm package and helps provide DC power port protectionfor portable electronics and systems using barrel jacks for power input,as well as internal overvoltage protection and transient suppression.

PolyZen devices help provide resettable protection against multi-wattfault events and requires only 0.7W power dissipation. In the event ofsustained high power conditions, the PPTC element of the device“trips” to limit current and generate voltage drop. This functionalityhelps protect both the Zener and the follow-on electronics, effectivelyincreasing the diode's power handling capacity.


• Helps shield downstream electronics from overvoltage and reverse bias

• Analog nature of trip events minimise upstream inductive spikes

• Helps reduce design costs with single component placement and minimal heat sinking requirements

• Overvoltage transient suppression• Stable VZ vs fault current• Time delayed, overvoltage trip• Time delayed, reverse bias trip• Power handling on the order of 100 watt• Integrated device construction• RoHS compliant

• Hard disk drive protection• Portable electronics• Computer subsystems• Automotive electronics• USB port protection• Internal overvoltage and transient suppression• DC power port protection for systems using

Barrel Jacks for power input

Vishay


Vishay Intertechnology, Inc., is one of the world’slargest manufacturers of discrete semiconductorsand passive electronic components.

Vishay has grown through R&D and acquisitions to become a leader inthe global electronics industry that sells into all geographic markets andall relevant market segments.

Resistors• Surface Mount and leaded packages• Wirewound, Power Metal Strip®, Thin Film, Thick

Film, Metal Film, carbon, MELF and mini- MELF• Film technologies• MIL, CECC, and EIA approved styles• Broadest Surface Mount product offering

Magnetics• Surface Mount and leaded transformers• Surface Mount and leaded power inductors and

RF inductors• High-frequency chip inductors• Chip impedance beads

Multi-layer Ceramic Capacitors• Large portfolio of EIA industry-standard sizes• Wide capacitance ranges• NP0, X5R, X7R, X8R, and Y5V dielectrics• High-voltage and specialty MLCCs• Low-ESR and Hi-Q MLCCs• MIL and Hi-Rel products• Chip arrays• Miniature 0201 sizes

Film Capacitors• Metallised film: MKT, MKP, and MKN• Excellent electrical parameters• Low losses, high current, not polarised• Self-healing properties• Customised designs

Molded Tantalum Chip Capacitors• T83 molded chip capacitor• 298D lead-frameless molded chip capacitor• 0603 and 0805 case sizes• Face-down terminations, 100% tin• Signal processing and power management in mobile

phones, digital cameras and MP3 devices

Bulk Metal® Foil Resistors• TCR: ± 0.05 ppm/°C (0°C to 60°C)• PCR “∆R due to self heating”: 5 ppm at rated power• Tolerance: from 0.001%• Electrostatic discharge above 25,000 V• Not limited to standard values (e.g. 1K12345)• Samples for prototypes within 48 hours ([email protected])

Single-Layer CeramicDisc Capacitors• Class 1 (SL, C0G, N750) and Class 2 (X5F,

X7R, Y5P, Y5R, Z5U, Y5U) dielectrics• Broad high-voltage and low-voltage ranges• General-purpose, low-dissipation, and

narrow-tolerance series• EMI RFI Y1 and Y2 series comply with IEC

60384-14 2nd edition• ENEC, UL, and CSA approved

RFI Capacitors• Metallised film MKP and MKT• 0.001µF up to 10µF• Class X and Y, small physical dimensions• Approvals: IEC384-14/2, EN 132400 UL,

CSA, CQC

Vishay


Leaded Tantalum Capacitors• SuperTan® Extended-Range (STE) Wet

Tantalum Capacitors• Highest capacitance per unit volume available• Capacitance ranges from 750µF to 10,000µF• Hermetic seal enables the STE to withstand

high stress and hazardous environments• Avionics, aerospace, smart munitions, petroleum

down-hole exploration and data logging

Power Metal Strip® Resistors• Range of package sizes from 0603 to 5931• Resistance range: 0.0002Ω to 1Ω• Temperature performance: up to +275°C• Tolerances: down to ± 0.5%• Low temperature coefficient: down to ± 30 ppm/°C• Excellent overload capability

MPM / MP / MPDA Precision ThinFilm Matched Pair Dividers• Small size: SOT-23, SC70, SOT-143 packages• Tight resistance ratio tolerances: ± 0.01% on

equal values• Low TCR tracking: ± 2.0 ppm• Excellent long-term stability: ± 0.03% ∆R ratio,

2000 hours at 70°C• Available lead (Pb) and lead (Pb)-free, e3,

solder (RoHS-compliant)

Resistor Arrays• Wide range of package sizes: 04, 06, 08 and 12• Wide resistance range: 1Ω to 10MΩ• Square corner and scalloped corner; convex

and concave terminations• Reduce board space, weight, and

component count• Eliminate 1 to 14 placements with a single chip

Conformal-Coated TantalumChip Capacitors• Hi-Rel COTS chip capacitors• T95 conformal-coated chip capacitor• Customer-definable termination plating, Weibull

grading, surge-current screening and ESR level• Designed for safety-critical avionics and

military applications

Aluminium Electrolytic Capacitors• Radial, Axial, SMD, large can, energy storage,

and solid aluminum• SMD versions: industrial, standard,

high-temperature, low-ESR• Large Can, Snap In, Printed Wiring Board,

Screw Terminal versions

Molded Surface Mount Resistors• Package sizes from 2012 to 6927• Resistance range: 0.1Ω to 100kΩ• High temperature performance: up to +275°C• Tight tolerances: down to ± 0.5%• Low temperature coefficient: down to ± 20 ppm/°C• Excellent overload capability

Vishay


Feature Product

TR3 MoldedTantalum ChipCapacitorVery Low ESR, High Ripple-Current Handling

Vishay’s TR3 series molded tantalum chip capacitors provide highefficiency with ESR values down to 0.035Ω and maximum ripplecurrent values up to 2.07A (100 kHz, 470 µF).

In addition to the TR3’s very low ESR values and high ripple-current handling capabilities, the new tantalum capacitors feature a proven solid tantalum construction that ensures long-term reliability.


• EIS 535BAAE and IEC QC300801 / US0001compliant

• A, B, C, D, E cases available with 90 / 10 Sn / Pb and 100% Sn terminations

• Compatible with high volume pick-and-place assembly equipment

• Cases B, C, D, E are 100% surge-current tested

• Capacitance ranges from 0.47µF to 680µF

• Voltage ranges from 4 WVDC to 50 WVDC

• Microprocessor bulk storage

• Telecom

• Automotive

• Computers: Line cards

• Avionics end systems

• Medical instrumentation

Vishay


Feature Product

WSLS2512Surface-Mount PowerMetal Strip® ResistorLow Resistance Change of 0.5% in LowResistance Values of 0.01Ω to 0.1Ω

Vishay's WSLS2512 surface-mount Power Metal Strip® resistoroffers improved resistance stability during operation to enableprecise current monitoring in high-temperature (+125°C),tightened-stability applications.

Features & Benefits• Low resistance values of 0.01Ω to 0.1Ω

• Low inductance values of 0.5nH to 2.0nH

• Tight tolerance down to ±0.5%

• Low TCR values down to ±30 ppm/°C

ApplicationsAutomotive electronic controls including:

• Engine controls

• Transmission controls

• Pollution controls testing is carried out to a proven procedureand the product development stages are well documented andapproved by a design approval team

Feature Product

IHLP™ Low-Profile,High-Current Inductorsin New 1616 FootprintLow Profiles of 1.2mm and 2.0mm WithMaximum Frequency Ranges of 1.0MHzand 5.0MHz

Vishay's IHLP-1616AB-11 and IHLP-1616BZ-11 inductors offer a

maximum frequency of 1.0 MHz, while the IHLP-1616AB-01 and

IHLP-1616BZ-01 feature a maximum frequency of 5.0 MHz. They

offer the lowest DCR/µH for their respective package sizes.

Features & Benefits• Inductance range of 0.047µH to 4.7µH

• Handle high transient current spikes without hard saturation

• Construction is RoHS-compliant and 100% lead (Pb)-free

• High resistance to thermal shock, moisture, mechanical shock,and vibration

Applications• VRM and DC-to-DC applications including point-of-loadconverters,

distributed power systems, and voltage regulation for FPGAs

• Medium- to high-current noise filtering and DC-to-DC boostconverters for white LED driver circuits

Yageo


Yageo is a major global player in surface mountedceramics components for the electronic industry and a company with a worldwide network of salesoffices, distribution centres and factories.

The company has a long history in ceramic technologyand in the development of innovative ceramic-basedsolutions for today's electronic equipment industries -mainly in the telecommunication, EDP and digitalconsumer areas. Yageo headquarters is located inTaipei, Taiwan, with European and North America Salesand Logistic facilities.

Yageo is well established as a supplier of multiplayer ceramic capacitors(MLCCs) and Surface Mount Resistors (R-Chips) manufactured instate-of-the-art production facilities around the world. Their productionfacility in Kaohsiung, Taiwan, for example, is widely regarded as a majorcentre in Asia Pacific for innovative manufacturing and its Suzhou, China,facility is currently the world largest factory for R-Chips. Yageo has ahighly developed commitment to environmental protection reflected intechnologies and industrial best practices and in aggressive targets forenergy and water savings and waste and emission reduction. Thecompany also pioneered, and still leads, the development of water-basedtechnologies and leads in the development of lead-free dielectrics forMLCC ranges and the replacement of palladium with less expensivebase-metal electrodes (BME) in MLCC ranges.

Besides developments in Passives like MLCC and R-Chips Yageo isexpanding its product portfolio with High Frequency Passive solutionscapable of covering the 400 MHz to 8 GHz frequency bands. In closecooperation with Customers HF components like Antenna’s, Baluns andFilters are being developed and produced for Bluetooth, WiMax, WWAN,DVB-T, GPS, 3G Wireless applications. Key for these HF components isthe integration of Simulation and Design, Materials and Manufacturing.

Resistor Chips (R-chips) • Surface Mount packages down to 0201• Thick and Thin Film and special products

including power chip high ohmic, low ohmic,high voltage, surge and trimmable chip resistors

• Broadest Surface Mount product offering• Thick-film arrays and networks

Power Inductors• For EMI / RFI filtering• High performance• High current up to 20A• Low cost• SMT toroid and SMT power inductors

Chip Inductors & Ferrite bead chips • Wide range of chip sizes down to 0402• High and low frequency application• High and low current• EMI Suppressor

Leaded Resistors• Wide product range of carbon film, metal

film and metal oxide (conventional and miniature styles)

• Flameproof• High quality

Electrolytic Capacitors• Snap In, Radial, SMD• Super miniature low profile• General purpose• Low impedance and low ESR• Low leakage current• Non-polar and very long life: up to 10,000 hours

Wirewound Components• Ceramic: coated and moulded versions• High power series up to 40V• Quick tape terminals• Axial, vertical and Radial Leaded• Circuit breaker and failsafe versions

(Wide range of styles including specials)

High Frequency Products • Wide range of ceramic antennas

(433 MHz - 5.8 GHz)• Based on low temperature cofired ceramic

(LTCC) technology• For wireless LAN, DECT, GPS, Bluetooth, dual

band, triple band and TDMA applications• High frequency filters, baluns and attenuators• Customised ceramic antennas on request

Multilayer Ceramic Capacitors (MLCC)• Wide capacitance range (0.47pF - 22µF)• NP0, X7R and Y5V dielectrics• High-voltage, arrays, ultra-small 0201 MLCCs,

low-inductance including unique X2Y® filtering,microwave, narrow tolerance, feed-throughcapacitors and arrays

• BME technology• Suitable for tantalum replacement

Innovative ServiceAround the Globe

Yageo


Feature Product

LTCC Surface MountCeramic Filter, BalunDiplexer, ComboYageo has wide portfolio Surface Mount CeramicMultilayer Filter / Balun / Balanced Filter (Combo)for all kind of HF applications.

Applications

Features & Benefits

• HF applications in 2.45 GHz, 3.5 GHz and 5 GHz range

• 2.45 GHz / 5 GHz dual frequency

• Good in combination with Yageo HF antennas

• Attractive cost solutions

• World Class volume manufacturing

Yageo offers you complete HF solutions, with awide range of ceramic, metal and PCB

antennas with full measuring support. Moredetails (complete product overview, datasheets,order code overview (12NC / CTC) and moredetailed application information) are available

on the Yageo microsite atwww.ttieurope.com/go/yageo

2.4/5 GHz module with Diplexer (Low Pass Band / High Pass filter)

If you haven’t tried TTI, then please call us to find outwhat a true specialist can offer.

Passive ComponentsProduct Guide


www.ttieurope.com

TTI Sales

www.ttieurope.com


By D4 See: www.d4online.com

PB: 1007V4

AUSTRIAViennaT: +43 (0) 18 79 85 90F: +43 (0) 18 79 85 90 10E: [email protected]

BENELUXEindhovenT: +31 (0) 40 290 1616F: +31 (0) 40 290 1610E: [email protected]

CZECH REPUBLICT: +420 541 225 215F: +420 541 228 285E: [email protected]

DENMARKCopenhagenT: +45 (0) 43 29 35 35F: +45 (0) 43 29 35 30E: [email protected]

FINLANDT: +358 9 83642340F: +358 9 83642341E: [email protected]

FRANCEBriveT: +33 (0) 5 55 92 92 93F: +33 (0) 5 55 92 91 90E: [email protected](Covering North Africa)

GERMANYMunichT: +49 (0) 81 42 66 80 110F: +49 (0) 81 42 66 80 199E: [email protected]

HanoverT: +49 (0) 5 11 7 80 59 0F: +49 (0) 5 11 7 42 49 0E: [email protected]

PforzheimT: +49 (0) 7231 14788 0F: +49 (0) 7231 14788 99E: [email protected]

DortmundT: +49 (0) 2301 91 304 0F: +49 (0) 2301 91 304 11E: [email protected]

HUNGARYBudapestT: +36 1 40 20 807F: +36 1 40 20 808E: [email protected]

IRELANDT: +353 (0) 21 4808070F: +353 (0) 21 4323350E: [email protected]

ISRAELT: +972 9 74333 36F: +972 9 74333 55E: [email protected]

ITALYMilanT: +39 02 822 521F: +39 02 822 522 33E: [email protected]

PadovaT: +39 049 774683F: +39 049 7927738

BolognaT: +39 051 632 1863F: +39 051 714 839

NORWAYT: +47 (0) 32 20 09 50F: +47 (0) 32 20 09 51E: [email protected]

POLANDKwidzynT: +48 (0) 55 279 67 57F: +48 (0) 55 279 75 50E: [email protected]

ROMANIACluj NapocaT: +40 (0) 264 439 103F: +40 (0) 264 439 106E: [email protected]

SLOVAKIABratislavaT: +421 (0) 905 575661F: +421 (0) 32 7430265E: [email protected]

SOUTH AFRICAT: +27 (0) 11 795 1050F: +27 (0) 11 795 1298E: [email protected]

SPAIN / PORTUGALBarcelonaT: +34 (0) 93 645 25 75F: +34 (0) 93 645 25 93E: [email protected]

Matiena-AbadianoT: +34 (0) 94 623 25 80F: +34 (0) 94 623 25 81E: [email protected]

SWEDENStockholmT: +46 (0) 8 594 11 800F: +46 (0) 8 594 11 801E: [email protected]

GothenburgT: +46 (0) 31 741 12 90F: +46 (0) 31 741 12 91E: [email protected]

SWITZERLANDBaarT: +41 (0) 41 76741 90F: +41 (0) 41 76741 99E: [email protected]

TURKEYT: +90 (0) 216 462 0097F: +90 (0) 216 462 0098E: [email protected]

UNITED KINGDOMHigh WycombeT: +44 (0) 1494 460000F: +44 (0) 1494 460090E: [email protected]

EssexMilitary Aerospace OfficeT: +44 (0) 1268 889520F: +44 (0) 1268 419225E: [email protected]

ScotlandT: +44 (0) 1698 464050F: +44 (0) 1698 464051E: [email protected]

CORPORATE HEADQUARTERSTTI Inc.2441 Northeast ParkwayFort WorthTexas 76106U.S.A.T: +1 817 740 9000F: +1 817 740 9898

EUROPEAN HEADQUARTERSTTI, Inc.Ganghoferstr. 3482216 Maisach-GernlindenGermanyT: +49 (0) 81 42 66 80 0F: +49 (0) 81 42 66 80 490E: [email protected]

Passive Components - oriontronix.ruoriontronix.ru/resources/pdf/Passive Brochure_WEB_17 10...

Documents

Transcript of Passive Components - oriontronix.ruoriontronix.ru/resources/pdf/Passive Brochure_WEB_17 10...